/*
 * Copyright (c) 1997, 2016, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 *
 */

#include "precompiled.hpp"
#include "interp_masm_x86.hpp"
#include "interpreter/interpreter.hpp"
#include "interpreter/interpreterRuntime.hpp"
#include "oops/arrayOop.hpp"
#include "oops/markOop.hpp"
#include "oops/methodData.hpp"
#include "oops/method.hpp"
#include "prims/jvmtiExport.hpp"
#include "prims/jvmtiRedefineClassesTrace.hpp"
#include "prims/jvmtiThreadState.hpp"
#include "runtime/basicLock.hpp"
#include "runtime/biasedLocking.hpp"
#include "runtime/sharedRuntime.hpp"
#include "runtime/thread.inline.hpp"


// Implementation of InterpreterMacroAssembler
#ifdef CC_INTERP
void InterpreterMacroAssembler::get_method(Register reg) {
  movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize)));
  movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method)));
}
#endif // CC_INTERP


#ifndef CC_INTERP
void InterpreterMacroAssembler::call_VM_leaf_base(
  address entry_point,
  int     number_of_arguments
) {
  // interpreter specific
  //
  // Note: No need to save/restore bcp & locals (rsi & rdi) pointer
  //       since these are callee saved registers and no blocking/
  //       GC can happen in leaf calls.
  // Further Note: DO NOT save/restore bcp/locals. If a caller has
  // already saved them so that it can use rsi/rdi as temporaries
  // then a save/restore here will DESTROY the copy the caller
  // saved! There used to be a save_bcp() that only happened in
  // the ASSERT path (no restore_bcp). Which caused bizarre failures
  // when jvm built with ASSERTs.
#ifdef ASSERT
  { Label L;
    cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
    jcc(Assembler::equal, L);
    stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL");
    bind(L);
  }
#endif
  // super call
  MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
  // interpreter specific

  // Used to ASSERT that rsi/rdi were equal to frame's bcp/locals
  // but since they may not have been saved (and we don't want to
  // save them here (see note above) the assert is invalid.
}


void InterpreterMacroAssembler::call_VM_base(
  Register oop_result,
  Register java_thread,
  Register last_java_sp,
  address  entry_point,
  int      number_of_arguments,
  bool     check_exceptions
) {
#ifdef ASSERT
  { Label L;
    cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
    jcc(Assembler::equal, L);
    stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL");
    bind(L);
  }
#endif /* ASSERT */
  // interpreter specific
  //
  // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
  //       really make a difference for these runtime calls, since they are
  //       slow anyway. Btw., bcp must be saved/restored since it may change
  //       due to GC.
  assert(java_thread == noreg , "not expecting a precomputed java thread");
  save_bcp();
  // super call
  MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions);
  // interpreter specific
  restore_bcp();
  restore_locals();
}


void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
  if (JvmtiExport::can_pop_frame()) {
    Label L;
    // Initiate popframe handling only if it is not already being processed.  If the flag
    // has the popframe_processing bit set, it means that this code is called *during* popframe
    // handling - we don't want to reenter.
    Register pop_cond = java_thread;  // Not clear if any other register is available...
    movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset()));
    testl(pop_cond, JavaThread::popframe_pending_bit);
    jcc(Assembler::zero, L);
    testl(pop_cond, JavaThread::popframe_processing_bit);
    jcc(Assembler::notZero, L);
    // Call Interpreter::remove_activation_preserving_args_entry() to get the
    // address of the same-named entrypoint in the generated interpreter code.
    call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
    jmp(rax);
    bind(L);
    get_thread(java_thread);
  }
}


void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
  get_thread(rcx);
  movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset()));
  const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset());
  const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset());
  const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset());
  const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset()
                             + in_ByteSize(wordSize));
  switch (state) {
    case atos: movptr(rax, oop_addr);
               movptr(oop_addr, NULL_WORD);
               verify_oop(rax, state);                break;
    case ltos:
               movl(rdx, val_addr1);               // fall through
    case btos:                                     // fall through
    case ztos:                                     // fall through
    case ctos:                                     // fall through
    case stos:                                     // fall through
    case itos: movl(rax, val_addr);                   break;
    case ftos: fld_s(val_addr);                       break;
    case dtos: fld_d(val_addr);                       break;
    case vtos: /* nothing to do */                    break;
    default  : ShouldNotReachHere();
  }
  // Clean up tos value in the thread object
  movl(tos_addr,  (int32_t) ilgl);
  movptr(val_addr,  NULL_WORD);
  NOT_LP64(movptr(val_addr1, NULL_WORD));
}


void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
  if (JvmtiExport::can_force_early_return()) {
    Label L;
    Register tmp = java_thread;
    movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset()));
    testptr(tmp, tmp);
    jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit;

    // Initiate earlyret handling only if it is not already being processed.
    // If the flag has the earlyret_processing bit set, it means that this code
    // is called *during* earlyret handling - we don't want to reenter.
    movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset()));
    cmpl(tmp, JvmtiThreadState::earlyret_pending);
    jcc(Assembler::notEqual, L);

    // Call Interpreter::remove_activation_early_entry() to get the address of the
    // same-named entrypoint in the generated interpreter code.
    get_thread(java_thread);
    movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset()));
    pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset()));
    call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1);
    jmp(rax);
    bind(L);
    get_thread(java_thread);
  }
}


void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) {
  assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
  load_unsigned_short(reg, Address(rsi, bcp_offset));
  bswapl(reg);
  shrl(reg, 16);
}


void InterpreterMacroAssembler::get_cache_index_at_bcp(Register reg, int bcp_offset, size_t index_size) {
  assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
  if (index_size == sizeof(u2)) {
    load_unsigned_short(reg, Address(rsi, bcp_offset));
  } else if (index_size == sizeof(u4)) {
    assert(EnableInvokeDynamic, "giant index used only for JSR 292");
    movl(reg, Address(rsi, bcp_offset));
    // Check if the secondary index definition is still ~x, otherwise
    // we have to change the following assembler code to calculate the
    // plain index.
    assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
    notl(reg);  // convert to plain index
  } else if (index_size == sizeof(u1)) {
    load_unsigned_byte(reg, Address(rsi, bcp_offset));
  } else {
    ShouldNotReachHere();
  }
}


void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index,
                                                           int bcp_offset, size_t index_size) {
  assert_different_registers(cache, index);
  get_cache_index_at_bcp(index, bcp_offset, index_size);
  movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
  assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
  assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line");
  shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index
}


void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache,
                                                                        Register index,
                                                                        Register bytecode,
                                                                        int byte_no,
                                                                        int bcp_offset,
                                                                        size_t index_size) {
  get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size);
  movptr(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset()));
  const int shift_count = (1 + byte_no) * BitsPerByte;
  assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) ||
         (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift),
         "correct shift count");
  shrptr(bytecode, shift_count);
  assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask");
  andptr(bytecode, ConstantPoolCacheEntry::bytecode_1_mask);
}


void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp,
                                                               int bcp_offset, size_t index_size) {
  assert(cache != tmp, "must use different register");
  get_cache_index_at_bcp(tmp, bcp_offset, index_size);
  assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
                               // convert from field index to ConstantPoolCacheEntry index
                               // and from word offset to byte offset
  assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line");
  shll(tmp, 2 + LogBytesPerWord);
  movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
                               // skip past the header
  addptr(cache, in_bytes(ConstantPoolCache::base_offset()));
  addptr(cache, tmp);            // construct pointer to cache entry
}

void InterpreterMacroAssembler::get_method_counters(Register method,
                                                    Register mcs, Label& skip) {
  Label has_counters;
  movptr(mcs, Address(method, Method::method_counters_offset()));
  testptr(mcs, mcs);
  jcc(Assembler::notZero, has_counters);
  call_VM(noreg, CAST_FROM_FN_PTR(address,
          InterpreterRuntime::build_method_counters), method);
  movptr(mcs, Address(method,Method::method_counters_offset()));
  testptr(mcs, mcs);
  jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory
  bind(has_counters);
}

// Load object from cpool->resolved_references(index)
void InterpreterMacroAssembler::load_resolved_reference_at_index(
                                           Register result, Register index) {
  assert_different_registers(result, index);
  // convert from field index to resolved_references() index and from
  // word index to byte offset. Since this is a java object, it can be compressed
  Register tmp = index;  // reuse
  shll(tmp, LogBytesPerHeapOop);

  get_constant_pool(result);
  // load pointer for resolved_references[] objArray
  movptr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes()));
  // JNIHandles::resolve(obj);
  movptr(result, Address(result, 0));
  // Add in the index
  addptr(result, tmp);
  load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
}

  // Generate a subtype check: branch to ok_is_subtype if sub_klass is
  // a subtype of super_klass.  EAX holds the super_klass.  Blows ECX.
  // Resets EDI to locals.  Register sub_klass cannot be any of the above.
void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) {
  assert( Rsub_klass != rax, "rax, holds superklass" );
  assert( Rsub_klass != rcx, "used as a temp" );
  assert( Rsub_klass != rdi, "used as a temp, restored from locals" );

  // Profile the not-null value's klass.
  profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi

  // Do the check.
  check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx

  // Profile the failure of the check.
  profile_typecheck_failed(rcx); // blows rcx
}

void InterpreterMacroAssembler::f2ieee() {
  if (IEEEPrecision) {
    fstp_s(Address(rsp, 0));
    fld_s(Address(rsp, 0));
  }
}


void InterpreterMacroAssembler::d2ieee() {
  if (IEEEPrecision) {
    fstp_d(Address(rsp, 0));
    fld_d(Address(rsp, 0));
  }
}

// Java Expression Stack

void InterpreterMacroAssembler::pop_ptr(Register r) {
  pop(r);
}

void InterpreterMacroAssembler::pop_i(Register r) {
  pop(r);
}

void InterpreterMacroAssembler::pop_l(Register lo, Register hi) {
  pop(lo);
  pop(hi);
}

void InterpreterMacroAssembler::pop_f() {
  fld_s(Address(rsp, 0));
  addptr(rsp, 1 * wordSize);
}

void InterpreterMacroAssembler::pop_d() {
  fld_d(Address(rsp, 0));
  addptr(rsp, 2 * wordSize);
}


void InterpreterMacroAssembler::pop(TosState state) {
  switch (state) {
    case atos: pop_ptr(rax);                                 break;
    case btos:                                               // fall through
    case ztos:                                               // fall through
    case ctos:                                               // fall through
    case stos:                                               // fall through
    case itos: pop_i(rax);                                   break;
    case ltos: pop_l(rax, rdx);                              break;
    case ftos: pop_f();                                      break;
    case dtos: pop_d();                                      break;
    case vtos: /* nothing to do */                           break;
    default  : ShouldNotReachHere();
  }
  verify_oop(rax, state);
}

void InterpreterMacroAssembler::push_ptr(Register r) {
  push(r);
}

void InterpreterMacroAssembler::push_i(Register r) {
  push(r);
}

void InterpreterMacroAssembler::push_l(Register lo, Register hi) {
  push(hi);
  push(lo);
}

void InterpreterMacroAssembler::push_f() {
  // Do not schedule for no AGI! Never write beyond rsp!
  subptr(rsp, 1 * wordSize);
  fstp_s(Address(rsp, 0));
}

void InterpreterMacroAssembler::push_d(Register r) {
  // Do not schedule for no AGI! Never write beyond rsp!
  subptr(rsp, 2 * wordSize);
  fstp_d(Address(rsp, 0));
}


void InterpreterMacroAssembler::push(TosState state) {
  verify_oop(rax, state);
  switch (state) {
    case atos: push_ptr(rax); break;
    case btos:                                               // fall through
    case ztos:                                               // fall through
    case ctos:                                               // fall through
    case stos:                                               // fall through
    case itos: push_i(rax);                                    break;
    case ltos: push_l(rax, rdx);                               break;
    case ftos: push_f();                                       break;
    case dtos: push_d(rax);                                    break;
    case vtos: /* nothing to do */                             break;
    default  : ShouldNotReachHere();
  }
}


// Helpers for swap and dup
void InterpreterMacroAssembler::load_ptr(int n, Register val) {
  movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
}

void InterpreterMacroAssembler::store_ptr(int n, Register val) {
  movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
}

void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
  // set sender sp
  lea(rsi, Address(rsp, wordSize));
  // record last_sp
  movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi);
}


// Jump to from_interpreted entry of a call unless single stepping is possible
// in this thread in which case we must call the i2i entry
void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
  prepare_to_jump_from_interpreted();

  if (JvmtiExport::can_post_interpreter_events()) {
    Label run_compiled_code;
    // JVMTI events, such as single-stepping, are implemented partly by avoiding running
    // compiled code in threads for which the event is enabled.  Check here for
    // interp_only_mode if these events CAN be enabled.
    get_thread(temp);
    // interp_only is an int, on little endian it is sufficient to test the byte only
    // Is a cmpl faster?
    cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0);
    jccb(Assembler::zero, run_compiled_code);
    jmp(Address(method, Method::interpreter_entry_offset()));
    bind(run_compiled_code);
  }

  jmp(Address(method, Method::from_interpreted_offset()));

}


// The following two routines provide a hook so that an implementation
// can schedule the dispatch in two parts.  Intel does not do this.
void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
  // Nothing Intel-specific to be done here.
}

void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
  dispatch_next(state, step);
}

void InterpreterMacroAssembler::dispatch_base(TosState state, address* table,
                                              bool verifyoop) {
  verify_FPU(1, state);
  if (VerifyActivationFrameSize) {
    Label L;
    mov(rcx, rbp);
    subptr(rcx, rsp);
    int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize;
    cmpptr(rcx, min_frame_size);
    jcc(Assembler::greaterEqual, L);
    stop("broken stack frame");
    bind(L);
  }
  if (verifyoop) verify_oop(rax, state);
  Address index(noreg, rbx, Address::times_ptr);
  ExternalAddress tbl((address)table);
  ArrayAddress dispatch(tbl, index);
  jump(dispatch);
}


void InterpreterMacroAssembler::dispatch_only(TosState state) {
  dispatch_base(state, Interpreter::dispatch_table(state));
}


void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
  dispatch_base(state, Interpreter::normal_table(state));
}

void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
  dispatch_base(state, Interpreter::normal_table(state), false);
}


void InterpreterMacroAssembler::dispatch_next(TosState state, int step) {
  // load next bytecode (load before advancing rsi to prevent AGI)
  load_unsigned_byte(rbx, Address(rsi, step));
  // advance rsi
  increment(rsi, step);
  dispatch_base(state, Interpreter::dispatch_table(state));
}


void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
  // load current bytecode
  load_unsigned_byte(rbx, Address(rsi, 0));
  dispatch_base(state, table);
}

// remove activation
//
// Unlock the receiver if this is a synchronized method.
// Unlock any Java monitors from syncronized blocks.
// Remove the activation from the stack.
//
// If there are locked Java monitors
//    If throw_monitor_exception
//       throws IllegalMonitorStateException
//    Else if install_monitor_exception
//       installs IllegalMonitorStateException
//    Else
//       no error processing
void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr,
                                                  bool throw_monitor_exception,
                                                  bool install_monitor_exception,
                                                  bool notify_jvmdi) {
  // Note: Registers rax, rdx and FPU ST(0) may be in use for the result
  // check if synchronized method
  Label unlocked, unlock, no_unlock;

  get_thread(rcx);
  const Address do_not_unlock_if_synchronized(rcx,
    in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));

  movbool(rbx, do_not_unlock_if_synchronized);
  mov(rdi,rbx);
  movbool(do_not_unlock_if_synchronized, false); // reset the flag

  movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags
  movl(rcx, Address(rbx, Method::access_flags_offset()));

  testl(rcx, JVM_ACC_SYNCHRONIZED);
  jcc(Assembler::zero, unlocked);

  // Don't unlock anything if the _do_not_unlock_if_synchronized flag
  // is set.
  mov(rcx,rdi);
  testbool(rcx);
  jcc(Assembler::notZero, no_unlock);

  // unlock monitor
  push(state);                                   // save result

  // BasicObjectLock will be first in list, since this is a synchronized method. However, need
  // to check that the object has not been unlocked by an explicit monitorexit bytecode.
  const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock));
  lea   (rdx, monitor);                          // address of first monitor

  movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes()));
  testptr(rax, rax);
  jcc    (Assembler::notZero, unlock);

  pop(state);
  if (throw_monitor_exception) {
    empty_FPU_stack();  // remove possible return value from FPU-stack, otherwise stack could overflow

    // Entry already unlocked, need to throw exception
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
    should_not_reach_here();
  } else {
    // Monitor already unlocked during a stack unroll.
    // If requested, install an illegal_monitor_state_exception.
    // Continue with stack unrolling.
    if (install_monitor_exception) {
      empty_FPU_stack();  // remove possible return value from FPU-stack, otherwise stack could overflow
      call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
    }
    jmp(unlocked);
  }

  bind(unlock);
  unlock_object(rdx);
  pop(state);

  // Check that for block-structured locking (i.e., that all locked objects has been unlocked)
  bind(unlocked);

  // rax, rdx: Might contain return value

  // Check that all monitors are unlocked
  {
    Label loop, exception, entry, restart;
    const int entry_size               = frame::interpreter_frame_monitor_size()           * wordSize;
    const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
    const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset        * wordSize);

    bind(restart);
    movptr(rcx, monitor_block_top);           // points to current entry, starting with top-most entry
    lea(rbx, monitor_block_bot);              // points to word before bottom of monitor block
    jmp(entry);

    // Entry already locked, need to throw exception
    bind(exception);

    if (throw_monitor_exception) {
      empty_FPU_stack();  // remove possible return value from FPU-stack, otherwise stack could overflow

      // Throw exception
      call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
      should_not_reach_here();
    } else {
      // Stack unrolling. Unlock object and install illegal_monitor_exception
      // Unlock does not block, so don't have to worry about the frame

      push(state);
      mov(rdx, rcx);
      unlock_object(rdx);
      pop(state);

      if (install_monitor_exception) {
        empty_FPU_stack();  // remove possible return value from FPU-stack, otherwise stack could overflow
        call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
      }

      jmp(restart);
    }

    bind(loop);
    cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD);  // check if current entry is used
    jcc(Assembler::notEqual, exception);

    addptr(rcx, entry_size);                     // otherwise advance to next entry
    bind(entry);
    cmpptr(rcx, rbx);                            // check if bottom reached
    jcc(Assembler::notEqual, loop);              // if not at bottom then check this entry
  }

  bind(no_unlock);

  // jvmti support
  if (notify_jvmdi) {
    notify_method_exit(state, NotifyJVMTI);     // preserve TOSCA
  } else {
    notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
  }

  // remove activation
  movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp
  leave();                                     // remove frame anchor
  pop(ret_addr);                               // get return address
  mov(rsp, rbx);                               // set sp to sender sp
  if (UseSSE) {
    // float and double are returned in xmm register in SSE-mode
    if (state == ftos && UseSSE >= 1) {
      subptr(rsp, wordSize);
      fstp_s(Address(rsp, 0));
      movflt(xmm0, Address(rsp, 0));
      addptr(rsp, wordSize);
    } else if (state == dtos && UseSSE >= 2) {
      subptr(rsp, 2*wordSize);
      fstp_d(Address(rsp, 0));
      movdbl(xmm0, Address(rsp, 0));
      addptr(rsp, 2*wordSize);
    }
  }
}

#endif /* !CC_INTERP */


// Lock object
//
// Argument: rdx : Points to BasicObjectLock to be used for locking. Must
// be initialized with object to lock
void InterpreterMacroAssembler::lock_object(Register lock_reg) {
  assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");

  if (UseHeavyMonitors) {
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
  } else {

    Label done;

    const Register swap_reg = rax;  // Must use rax, for cmpxchg instruction
    const Register obj_reg  = rcx;  // Will contain the oop

    const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
    const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
    const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes();

    Label slow_case;

    // Load object pointer into obj_reg %rcx
    movptr(obj_reg, Address(lock_reg, obj_offset));

    if (UseBiasedLocking) {
      // Note: we use noreg for the temporary register since it's hard
      // to come up with a free register on all incoming code paths
      biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case);
    }

    // Load immediate 1 into swap_reg %rax,
    movptr(swap_reg, (int32_t)1);

    // Load (object->mark() | 1) into swap_reg %rax,
    orptr(swap_reg, Address(obj_reg, 0));

    // Save (object->mark() | 1) into BasicLock's displaced header
    movptr(Address(lock_reg, mark_offset), swap_reg);

    assert(lock_offset == 0, "displached header must be first word in BasicObjectLock");
    if (os::is_MP()) {
      lock();
    }
    cmpxchgptr(lock_reg, Address(obj_reg, 0));
    if (PrintBiasedLockingStatistics) {
      cond_inc32(Assembler::zero,
                 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
    }
    jcc(Assembler::zero, done);

    // Test if the oopMark is an obvious stack pointer, i.e.,
    //  1) (mark & 3) == 0, and
    //  2) rsp <= mark < mark + os::pagesize()
    //
    // These 3 tests can be done by evaluating the following
    // expression: ((mark - rsp) & (3 - os::vm_page_size())),
    // assuming both stack pointer and pagesize have their
    // least significant 2 bits clear.
    // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg
    subptr(swap_reg, rsp);
    andptr(swap_reg, 3 - os::vm_page_size());

    // Save the test result, for recursive case, the result is zero
    movptr(Address(lock_reg, mark_offset), swap_reg);

    if (PrintBiasedLockingStatistics) {
      cond_inc32(Assembler::zero,
                 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
    }
    jcc(Assembler::zero, done);

    bind(slow_case);

    // Call the runtime routine for slow case
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);

    bind(done);
  }
}


// Unlocks an object. Used in monitorexit bytecode and remove_activation.
//
// Argument: rdx : Points to BasicObjectLock structure for lock
// Throw an IllegalMonitorException if object is not locked by current thread
//
// Uses: rax, rbx, rcx, rdx
void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
  assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");

  if (UseHeavyMonitors) {
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
  } else {
    Label done;

    const Register swap_reg   = rax;  // Must use rax, for cmpxchg instruction
    const Register header_reg = rbx;  // Will contain the old oopMark
    const Register obj_reg    = rcx;  // Will contain the oop

    save_bcp(); // Save in case of exception

    // Convert from BasicObjectLock structure to object and BasicLock structure
    // Store the BasicLock address into %rax,
    lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));

    // Load oop into obj_reg(%rcx)
    movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ()));

    // Free entry
    movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD);

    if (UseBiasedLocking) {
      biased_locking_exit(obj_reg, header_reg, done);
    }

    // Load the old header from BasicLock structure
    movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes()));

    // Test for recursion
    testptr(header_reg, header_reg);

    // zero for recursive case
    jcc(Assembler::zero, done);

    // Atomic swap back the old header
    if (os::is_MP()) lock();
    cmpxchgptr(header_reg, Address(obj_reg, 0));

    // zero for recursive case
    jcc(Assembler::zero, done);

    // Call the runtime routine for slow case.
    movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);

    bind(done);

    restore_bcp();
  }
}


#ifndef CC_INTERP

// Test ImethodDataPtr.  If it is null, continue at the specified label
void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize));
  testptr(mdp, mdp);
  jcc(Assembler::zero, zero_continue);
}


// Set the method data pointer for the current bcp.
void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
  assert(ProfileInterpreter, "must be profiling interpreter");
  Label set_mdp;
  push(rax);
  push(rbx);

  get_method(rbx);
  // Test MDO to avoid the call if it is NULL.
  movptr(rax, Address(rbx, in_bytes(Method::method_data_offset())));
  testptr(rax, rax);
  jcc(Assembler::zero, set_mdp);
  // rbx,: method
  // rsi: bcp
  call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi);
  // rax,: mdi
  // mdo is guaranteed to be non-zero here, we checked for it before the call.
  movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset())));
  addptr(rbx, in_bytes(MethodData::data_offset()));
  addptr(rax, rbx);
  bind(set_mdp);
  movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
  pop(rbx);
  pop(rax);
}

void InterpreterMacroAssembler::verify_method_data_pointer() {
  assert(ProfileInterpreter, "must be profiling interpreter");
#ifdef ASSERT
  Label verify_continue;
  push(rax);
  push(rbx);
  push(rcx);
  push(rdx);
  test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue
  get_method(rbx);

  // If the mdp is valid, it will point to a DataLayout header which is
  // consistent with the bcp.  The converse is highly probable also.
  load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset())));
  addptr(rdx, Address(rbx, Method::const_offset()));
  lea(rdx, Address(rdx, ConstMethod::codes_offset()));
  cmpptr(rdx, rsi);
  jcc(Assembler::equal, verify_continue);
  // rbx,: method
  // rsi: bcp
  // rcx: mdp
  call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx);
  bind(verify_continue);
  pop(rdx);
  pop(rcx);
  pop(rbx);
  pop(rax);
#endif // ASSERT
}


void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) {
  // %%% this seems to be used to store counter data which is surely 32bits
  // however 64bit side stores 64 bits which seems wrong
  assert(ProfileInterpreter, "must be profiling interpreter");
  Address data(mdp_in, constant);
  movptr(data, value);
}


void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
                                                      int constant,
                                                      bool decrement) {
  // Counter address
  Address data(mdp_in, constant);

  increment_mdp_data_at(data, decrement);
}


void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
                                                      bool decrement) {

  assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
  assert(ProfileInterpreter, "must be profiling interpreter");

  // %%% 64bit treats this as 64 bit which seems unlikely
  if (decrement) {
    // Decrement the register.  Set condition codes.
    addl(data, -DataLayout::counter_increment);
    // If the decrement causes the counter to overflow, stay negative
    Label L;
    jcc(Assembler::negative, L);
    addl(data, DataLayout::counter_increment);
    bind(L);
  } else {
    assert(DataLayout::counter_increment == 1,
           "flow-free idiom only works with 1");
    // Increment the register.  Set carry flag.
    addl(data, DataLayout::counter_increment);
    // If the increment causes the counter to overflow, pull back by 1.
    sbbl(data, 0);
  }
}


void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
                                                      Register reg,
                                                      int constant,
                                                      bool decrement) {
  Address data(mdp_in, reg, Address::times_1, constant);

  increment_mdp_data_at(data, decrement);
}


void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  int header_offset = in_bytes(DataLayout::header_offset());
  int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant);
  // Set the flag
  orl(Address(mdp_in, header_offset), header_bits);
}


void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
                                                 int offset,
                                                 Register value,
                                                 Register test_value_out,
                                                 Label& not_equal_continue) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  if (test_value_out == noreg) {
    cmpptr(value, Address(mdp_in, offset));
  } else {
    // Put the test value into a register, so caller can use it:
    movptr(test_value_out, Address(mdp_in, offset));
    cmpptr(test_value_out, value);
  }
  jcc(Assembler::notEqual, not_equal_continue);
}


void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  Address disp_address(mdp_in, offset_of_disp);
  addptr(mdp_in,disp_address);
  movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}


void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
  addptr(mdp_in, disp_address);
  movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}


void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  addptr(mdp_in, constant);
  movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}


void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
  assert(ProfileInterpreter, "must be profiling interpreter");
  push(return_bci);             // save/restore across call_VM
  call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci);
  pop(return_bci);
}


void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    // Otherwise, assign to mdp
    test_method_data_pointer(mdp, profile_continue);

    // We are taking a branch.  Increment the taken count.
    // We inline increment_mdp_data_at to return bumped_count in a register
    //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
    Address data(mdp, in_bytes(JumpData::taken_offset()));

    // %%% 64bit treats these cells as 64 bit but they seem to be 32 bit
    movl(bumped_count,data);
    assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
    addl(bumped_count, DataLayout::counter_increment);
    sbbl(bumped_count, 0);
    movl(data,bumped_count);    // Store back out

    // The method data pointer needs to be updated to reflect the new target.
    update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // We are taking a branch.  Increment the not taken count.
    increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));

    // The method data pointer needs to be updated to correspond to the next bytecode
    update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
    bind (profile_continue);
  }
}

void InterpreterMacroAssembler::profile_call(Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // We are making a call.  Increment the count.
    increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));

    // The method data pointer needs to be updated to reflect the new target.
    update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_final_call(Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // We are making a call.  Increment the count.
    increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));

    // The method data pointer needs to be updated to reflect the new target.
    update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp,
                                                     Register reg2,
                                                     bool receiver_can_be_null) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    Label skip_receiver_profile;
    if (receiver_can_be_null) {
      Label not_null;
      testptr(receiver, receiver);
      jccb(Assembler::notZero, not_null);
      // We are making a call.  Increment the count for null receiver.
      increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
      jmp(skip_receiver_profile);
      bind(not_null);
    }

    // Record the receiver type.
    record_klass_in_profile(receiver, mdp, reg2, true);
    bind(skip_receiver_profile);

    // The method data pointer needs to be updated to reflect the new target.
    update_mdp_by_constant(mdp,
                           in_bytes(VirtualCallData::
                                    virtual_call_data_size()));
    bind(profile_continue);
  }
}


void InterpreterMacroAssembler::record_klass_in_profile_helper(
                                        Register receiver, Register mdp,
                                        Register reg2, int start_row,
                                        Label& done, bool is_virtual_call) {
  if (TypeProfileWidth == 0) {
    if (is_virtual_call) {
      increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
    }
    return;
  }

  int last_row = VirtualCallData::row_limit() - 1;
  assert(start_row <= last_row, "must be work left to do");
  // Test this row for both the receiver and for null.
  // Take any of three different outcomes:
  //   1. found receiver => increment count and goto done
  //   2. found null => keep looking for case 1, maybe allocate this cell
  //   3. found something else => keep looking for cases 1 and 2
  // Case 3 is handled by a recursive call.
  for (int row = start_row; row <= last_row; row++) {
    Label next_test;
    bool test_for_null_also = (row == start_row);

    // See if the receiver is receiver[n].
    int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
    test_mdp_data_at(mdp, recvr_offset, receiver,
                     (test_for_null_also ? reg2 : noreg),
                     next_test);
    // (Reg2 now contains the receiver from the CallData.)

    // The receiver is receiver[n].  Increment count[n].
    int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
    increment_mdp_data_at(mdp, count_offset);
    jmp(done);
    bind(next_test);

    if (row == start_row) {
      Label found_null;
      // Failed the equality check on receiver[n]...  Test for null.
      testptr(reg2, reg2);
      if (start_row == last_row) {
        // The only thing left to do is handle the null case.
        if (is_virtual_call) {
          jccb(Assembler::zero, found_null);
          // Receiver did not match any saved receiver and there is no empty row for it.
          // Increment total counter to indicate polymorphic case.
          increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
          jmp(done);
          bind(found_null);
        } else {
          jcc(Assembler::notZero, done);
        }
        break;
      }
      // Since null is rare, make it be the branch-taken case.
      jcc(Assembler::zero, found_null);

      // Put all the "Case 3" tests here.
      record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call);

      // Found a null.  Keep searching for a matching receiver,
      // but remember that this is an empty (unused) slot.
      bind(found_null);
    }
  }

  // In the fall-through case, we found no matching receiver, but we
  // observed the receiver[start_row] is NULL.

  // Fill in the receiver field and increment the count.
  int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
  set_mdp_data_at(mdp, recvr_offset, receiver);
  int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
  movptr(reg2, (intptr_t)DataLayout::counter_increment);
  set_mdp_data_at(mdp, count_offset, reg2);
  if (start_row > 0) {
    jmp(done);
  }
}

void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
                                                        Register mdp, Register reg2,
                                                        bool is_virtual_call) {
  assert(ProfileInterpreter, "must be profiling");
  Label done;

  record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);

  bind (done);
}

void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;
    uint row;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // Update the total ret count.
    increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));

    for (row = 0; row < RetData::row_limit(); row++) {
      Label next_test;

      // See if return_bci is equal to bci[n]:
      test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci,
                       noreg, next_test);

      // return_bci is equal to bci[n].  Increment the count.
      increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));

      // The method data pointer needs to be updated to reflect the new target.
      update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row)));
      jmp(profile_continue);
      bind(next_test);
    }

    update_mdp_for_ret(return_bci);

    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());

    // The method data pointer needs to be updated.
    int mdp_delta = in_bytes(BitData::bit_data_size());
    if (TypeProfileCasts) {
      mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
    }
    update_mdp_by_constant(mdp, mdp_delta);

    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
  if (ProfileInterpreter && TypeProfileCasts) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    int count_offset = in_bytes(CounterData::count_offset());
    // Back up the address, since we have already bumped the mdp.
    count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());

    // *Decrement* the counter.  We expect to see zero or small negatives.
    increment_mdp_data_at(mdp, count_offset, true);

    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2)
{
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // The method data pointer needs to be updated.
    int mdp_delta = in_bytes(BitData::bit_data_size());
    if (TypeProfileCasts) {
      mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());

      // Record the object type.
      record_klass_in_profile(klass, mdp, reg2, false);
      assert(reg2 == rdi, "we know how to fix this blown reg");
      restore_locals();         // Restore EDI
    }
    update_mdp_by_constant(mdp, mdp_delta);

    bind(profile_continue);
  }
}


void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // Update the default case count
    increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset()));

    // The method data pointer needs to be updated.
    update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset()));

    bind (profile_continue);
  }
}


void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) {
  if (ProfileInterpreter) {
    Label profile_continue;

    // If no method data exists, go to profile_continue.
    test_method_data_pointer(mdp, profile_continue);

    // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes()
    movptr(reg2, (intptr_t)in_bytes(MultiBranchData::per_case_size()));
    // index is positive and so should have correct value if this code were
    // used on 64bits
    imulptr(index, reg2);
    addptr(index, in_bytes(MultiBranchData::case_array_offset()));

    // Update the case count
    increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset()));

    // The method data pointer needs to be updated.
    update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset()));

    bind (profile_continue);
  }
}

#endif // !CC_INTERP


void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
  if (state == atos) MacroAssembler::verify_oop(reg);
}


#ifndef CC_INTERP
void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
  if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth);
}

#endif /* CC_INTERP */


void InterpreterMacroAssembler::notify_method_entry() {
  // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
  // track stack depth.  If it is possible to enter interp_only_mode we add
  // the code to check if the event should be sent.
  if (JvmtiExport::can_post_interpreter_events()) {
    Label L;
    get_thread(rcx);
    movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
    testl(rcx,rcx);
    jcc(Assembler::zero, L);
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry));
    bind(L);
  }

  {
    SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
    get_thread(rcx);
    get_method(rbx);
    call_VM_leaf(
      CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx);
  }

  // RedefineClasses() tracing support for obsolete method entry
  if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
    get_thread(rcx);
    get_method(rbx);
    call_VM_leaf(
      CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
      rcx, rbx);
  }
}


void InterpreterMacroAssembler::notify_method_exit(
    TosState state, NotifyMethodExitMode mode) {
  // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
  // track stack depth.  If it is possible to enter interp_only_mode we add
  // the code to check if the event should be sent.
  if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
    Label L;
    // Note: frame::interpreter_frame_result has a dependency on how the
    // method result is saved across the call to post_method_exit. If this
    // is changed then the interpreter_frame_result implementation will
    // need to be updated too.

    // For c++ interpreter the result is always stored at a known location in the frame
    // template interpreter will leave it on the top of the stack.
    NOT_CC_INTERP(push(state);)
    get_thread(rcx);
    movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
    testl(rcx,rcx);
    jcc(Assembler::zero, L);
    call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
    bind(L);
    NOT_CC_INTERP(pop(state);)
  }

  {
    SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
    NOT_CC_INTERP(push(state));
    get_thread(rbx);
    get_method(rcx);
    call_VM_leaf(
      CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
      rbx, rcx);
    NOT_CC_INTERP(pop(state));
  }
}

// Jump if ((*counter_addr += increment) & mask) satisfies the condition.
void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
                                                        int increment, int mask,
                                                        Register scratch, bool preloaded,
                                                        Condition cond, Label* where) {
  if (!preloaded) {
    movl(scratch, counter_addr);
  }
  incrementl(scratch, increment);
  movl(counter_addr, scratch);
  andl(scratch, mask);
  jcc(cond, *where);
}