diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt
index 2eef038..3f6b314 100644
--- a/Documentation/RelNotes-1.7.1.1.txt
+++ b/Documentation/RelNotes-1.7.1.1.txt
@@ -1,5 +1,5 @@
-Git v1.7.1.1 Release Notes (draft)
-==================================
+Git v1.7.1.1 Release Notes
+==========================
 
 Fixes since v1.7.1
 ------------------
@@ -15,14 +15,41 @@
    macro that set/unset one attribute, immediately followed by an
    overriding setting; this makes attribute macros much easier to use.
 
+ * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70).
+
+ * In 1.7.0, read-tree and user commands that use the mechanism such as
+   checkout and merge were fixed to handle switching between branches one
+   of which has a file while the other has a directory at the same path
+   correctly even when there are some "confusing" pathnames in them.  But
+   the algorithm used for this fix was suboptimal and had a terrible
+   performance degradation especially in larger trees.
+
  * "git am -3" did not show diagnosis when the patch in the message was corrupt.
 
+ * After "git apply --whitespace=fix" removed trailing blank lines in an
+   patch in a patch series, it failed to apply later patches that depend
+   on the presence of such blank lines.
+
  * "git bundle --stdin" segfaulted.
 
+ * "git checkout" and "git rebase" overwrote paths that are marked "assume
+   unchanged".
+
+ * "git commit --amend" on a commit with an invalid author-name line that
+   lacks the display name didn't work.
+
  * "git describe" did not tie-break tags that point at the same commit
    correctly; newer ones are preferred by paying attention to the
    tagger date now.
 
+ * "git diff" used to tell underlying xdiff machinery to work very hard to
+   minimize the output, but this often was spending too many extra cycles
+   for very little gain.
+
+ * "git diff --color" did not paint extended diff headers per line
+   (i.e. the coloring escape sequence didn't end at the end of line),
+   which confused "less -R".
+
  * "git fetch" over HTTP verifies the downloaded packfiles more robustly.
 
  * The memory usage by "git index-pack" (run during "git fetch" and "git
@@ -32,10 +59,33 @@
 
  * "git log --abbrev=$num --format='%h' ignored --abbrev=$num.
 
+ * "git ls-files ../out/side/cwd" refused to work.
+
+ * "git merge --log" used to replace the custom message given by "-m" with
+   the shortlog, instead of appending to it.
+
+ * "git notes copy" without any other argument segfaulted.
+
+ * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but
+   ignored the option itself, resulting in a bogus attempt to merge
+   unrelated commit.
+
+ * "git rebase" did not faithfully reproduce a malformed author ident, that
+   is often seen in a repository converted from foreign SCMs.
+
+ * "git reset --hard" started from a wrong directory and a working tree in
+   a nonstandard location is in use got confused.
+
  * "git send-email" lacked a way to specify the domainname used in the
    EHLO/HELO exchange, causing rejected connection from picky servers.
    It learned --smtp-domain option to solve this issue.
 
+ * "git send-email" did not declare a content-transfer-encoding and
+   content-type even when its payload needs to be sent in 8-bit.
+
+ * "git show -C -C" and other corner cases lost diff metainfo output
+   in 1.7.0.
+
  * "git stash" incorrectly lost paths in the working tree that were
    previously removed from the index.
 
diff --git a/Documentation/RelNotes-1.7.2.txt b/Documentation/RelNotes-1.7.2.txt
index bd87a91..8ed7406 100644
--- a/Documentation/RelNotes-1.7.2.txt
+++ b/Documentation/RelNotes-1.7.2.txt
@@ -4,6 +4,11 @@
 Updates since v1.7.1
 --------------------
 
+ * core.eol configuration and eol attribute are the new way to control
+   the end of line conventions for files in the working tree;
+   core.autocrlf overrides it, keeping the traditional behaviour by
+   default.
+
  * The whitespace rules used in "git apply --whitespace" and "git diff"
    gained a new member in the family (tab-in-indent) to help projects with
    policy to indent only with spaces.
@@ -16,22 +21,32 @@
    environment variable can be used to tell git not to stop at a
    filesystem boundary.
 
+ * Usage help messages generated by parse-options library (i.e. most
+   of the Porcelain commands) are sent to the standard output now.
+
+ * ':/<string>' notation to look for a commit now takes regular expression
+   and it is not anchored at the beginning of the commit log message
+   anymore (this is a backward incompatible change).
+
  * "git" wrapper learned "-c name=value" option to override configuration
    variable from the command line.
 
- * After "git apply --whitespace=fix" removed trailing blank lines in an
-   patch in a patch series, it failed to apply later patches that depend
-   on the presense of such blank lines.
+ * Improved portability for various platforms including older SunOS,
+   HP-UX 10/11, AIX, Tru64, etc. and platforms with Python 2.4.
 
  * The message from "git am -3" has been improved when conflict
    resolution ended up making the patch a no-op.
 
+ * "git blame" applies the textconv filter to the contents it works
+   on, when available.
+
  * "git checkout --orphan newbranch" is similar to "-b newbranch" but
    prepares to create a root commit that is not connected to any existing
    commit.
 
- * "git commit --amend" on a commit with an invalid author-name line that
-   lacks the display name didn't work (fb7749e4).
+ * "git cherry-pick" learned to pick a range of commits (e.g. "cherry-pick
+   A..B"); this does not have nicer sequencing control "rebase [-i]" has,
+   though.
 
  * "git cvsserver" can be told to use pserver; its password file can be
    stored outside the repository.
@@ -39,10 +54,6 @@
  * The output from the textconv filter used by "git diff" can be cached to
    speed up their reuse.
 
- * "git diff --color" did not paint extended diff headers per line
-   (i.e. the coloring escape sequence didn't end at the end of line),
-   which confused "less -R".
-
  * "git diff --word-diff=<mode>" extends the existing "--color-words"
    option, making it more useful in color-challenged environments.
 
@@ -56,6 +67,10 @@
  * "git for-each-ref" learned "%(objectname:short)" that gives the object
    name abbreviated.
 
+ * "git format-patch" learned --signature option and format.signature
+   configuration variable to customize the e-mail signature used in the
+   output.
+
  * Various options to "git grep" (e.g. --count, --name-only) work better
    with binary files.
 
@@ -64,7 +79,10 @@
  * "git log --follow <path>" follows across copies (it used to only follow
    renames).  This may make the processing more expensive.
 
- * "git ls-files ../out/side/cwd" works now.
+ * "git log --pretty=format:<template>" specifier learned "% <something>"
+   magic that inserts a space only when %<something> expands to a
+   non-empty string; this is similar to "%+<something>" magic, but is
+   useful in a context to generate a single line output.
 
  * "git notes prune" learned "-n" (dry-run) and "-v" options, similar to
    what "git prune" has.
@@ -76,12 +94,21 @@
 
  * "git revert" learned --strategy option to specify the merge strategy.
 
+ * "git rev-list A..B" learned --ancestry-path option to further limit
+   the result to the commits that are on the ancestry chain between A and
+   B (i.e. commits that are not descendants of A are excluded).
+
+ * "git show -5" is equivalent to "git show --do-walk 5"; this is similar
+   to the update to make "git show master..next" walk the history,
+   introduced in 1.6.4.
+
  * "git status [-s] --ignored" can be used to list ignored paths.
 
  * "git status -s -b" shows the current branch in the output.
 
  * Various "gitweb" enhancements and clean-ups, including syntax
-   highlighting, "plackup" support for instaweb, etc.
+   highlighting, "plackup" support for instaweb, .fcgi suffix to run
+   it as FastCGI script, etc.
 
 
 Fixes since v1.7.1
@@ -90,25 +117,23 @@
 All of the fixes in v1.7.1.X maintenance series are included in this
 release, unless otherwise noted.
 
- * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70).
-
  * We didn't URL decode "file:///path/to/repo" correctly when path/to/repo
    had percent-encoded characters (638794c, 9d2e942).
 
- * "git checkout" and "git rebase" overwrote paths that are marked "assume
-   unchanged" (aecda37c).
+ * "git commit" did not honor GIT_REFLOG_ACTION environment variable, resulting
+   reflog messages for cherry-pick and revert actions to be recorded as "commit".
 
  * "git clone/fetch/pull" issued an incorrect error message when a ref and
    a symref that points to the ref were updated at the same time.  This
    obviously would update them to the same value, and should not result in
-   an error condition (7223dcaf).
+   an error condition (0e71bc3).
 
  * "git clone" did not configure remote.origin.url correctly for bare
    clones (df61c889).
 
- * "git diff" used to tell underlying xdiff machinery to work very hard to
-   minimize the output, but this often was spending too many extra cycles
-   for very little gain (582aa00).
+ * "git diff" inside a tree with many pathnames that have certain
+   characters has become very slow in 1.7.0 by mistake (will merge
+   e53e6b443 to 'maint').
 
  * "git diff --graph" works better with "--color-words" and other options
    (81fa024..4297c0a).
@@ -116,21 +141,14 @@
  * "git diff" could show ambiguous abbreviation of blob object names on
    its "index" line (3e5a188).
 
- * "git merge --log" used to replace the custom message given by "-m" with
-   the shortlog, instead of appending to it (tc/merge-m-log).
-
- * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but
-   ignored the option itself, resulting in a bogus attempt to merge
-   unrelated commit (29609e68).
+ * "git rebase" did not faithfully reproduce a malformed author ident, that
+   is often seen in a repository converted from foreign SCMs (43c23251).
 
  * "git reset --hard" started from a wrong directory and a working tree in
    a nonstandard location is in use got confused (560fb6a1).
 
- * "git show -C -C" and other corner cases lost diff metainfo output
-   in 1.7.0 (296c6bb).
-
 --
 exec >/var/tmp/1
-O=v1.7.1-423-gae391ec
+O=v1.7.1-592-gcf4403a
 echo O=$(git describe HEAD)
 git shortlog --no-merges HEAD ^maint ^$O
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 89cb487..72949e7 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -196,20 +196,17 @@
 	quoted without `-z` regardless of the setting of this
 	variable.
 
-core.autocrlf::
-	If true, makes git convert `CRLF` at the end of lines in text files to
-	`LF` when reading from the work tree, and convert in reverse when
-	writing to the work tree.  The variable can be set to
-	'input', in which case the conversion happens only while
-	reading from the work tree but files are written out to the work
-	tree with `LF` at the end of lines.  A file is considered
-	"text" (i.e. be subjected to the autocrlf mechanism) based on
-	the file's `crlf` attribute, or if `crlf` is unspecified,
-	based on the file's contents.  See linkgit:gitattributes[5].
+core.eol::
+	Sets the line ending type to use in the working directory for
+	files that have the `text` property set.  Alternatives are
+	'lf', 'crlf' and 'native', which uses the platform's native
+	line ending.  The default value is `native`.  See
+	linkgit:gitattributes[5] for more information on end-of-line
+	conversion.
 
 core.safecrlf::
-	If true, makes git check if converting `CRLF` as controlled by
-	`core.autocrlf` is reversible.  Git will verify if a command
+	If true, makes git check if converting `CRLF` is reversible when
+	end-of-line conversion is active.  Git will verify if a command
 	modifies a file in the work tree either directly or indirectly.
 	For example, committing a file followed by checking out the
 	same file should yield the original file in the work tree.  If
@@ -219,7 +216,7 @@
 	irreversible conversion but continue the operation.
 +
 CRLF conversion bears a slight chance of corrupting data.
-autocrlf=true will convert CRLF to LF during commit and LF to
+When it is enabled, git will convert CRLF to LF during commit and LF to
 CRLF during checkout.  A file that contains a mixture of LF and
 CRLF before the commit cannot be recreated by git.  For text
 files this is the right thing to do: it corrects line endings
@@ -243,15 +240,25 @@
 +
 Note, this safety check does not mean that a checkout will generate a
 file identical to the original file for a different setting of
-`core.autocrlf`, but only for the current one.  For example, a text
-file with `LF` would be accepted with `core.autocrlf=input` and could
-later be checked out with `core.autocrlf=true`, in which case the
+`core.eol` and `core.autocrlf`, but only for the current one.  For
+example, a text file with `LF` would be accepted with `core.eol=lf`
+and could later be checked out with `core.eol=crlf`, in which case the
 resulting file would contain `CRLF`, although the original file
 contained `LF`.  However, in both work trees the line endings would be
 consistent, that is either all `LF` or all `CRLF`, but never mixed.  A
 file with mixed line endings would be reported by the `core.safecrlf`
 mechanism.
 
+core.autocrlf::
+	Setting this variable to "true" is almost the same as setting
+	the `text` attribute to "auto" on all files except that text
+	files are not guaranteed to be normalized: files that contain
+	`CRLF` in the repository will not be touched.  Use this
+	setting if you want to have `CRLF` line endings in your
+	working directory even though the repository does not have
+	normalized line endings.  This variable can be set to 'input',
+	in which case no output conversion is performed.
+
 core.symlinks::
 	If false, symbolic links are checked out as small plain files that
 	contain the link text. linkgit:git-update-index[1] and
@@ -887,6 +894,12 @@
 	The default for format-patch is to output files with the '[PATCH]'
 	subject prefix. Use this variable to change that prefix.
 
+format.signature::
+	The default for format-patch is to output a signature containing
+	the git version number. Use this variable to change that default.
+	Set this variable to the empty string ("") to suppress
+	signature generation.
+
 format.suffix::
 	The default for format-patch is to output files with the suffix
 	`.patch`. Use this variable to change that suffix (make sure to
@@ -984,13 +997,15 @@
 	various stuff. See linkgit:git-cvsserver[1].
 
 gitcvs.usecrlfattr::
-	If true, the server will look up the `crlf` attribute for
-	files to determine the '-k' modes to use. If `crlf` is set,
-	the '-k' mode will be left blank, so cvs clients will
-	treat it as text. If `crlf` is explicitly unset, the file
+	If true, the server will look up the end-of-line conversion
+	attributes for files to determine the '-k' modes to use. If
+	the attributes force git to treat a file as text,
+	the '-k' mode will be left blank so cvs clients will
+	treat it as text. If they suppress text conversion, the file
 	will be set with '-kb' mode, which suppresses any newline munging
-	the client might otherwise do. If `crlf` is not specified,
-	then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5].
+	the client might otherwise do. If the attributes do not allow
+	the file type to be determined, then 'gitcvs.allbinary' is
+	used. See linkgit:gitattributes[5].
 
 gitcvs.allbinary::
 	This is used if 'gitcvs.usecrlfattr' does not resolve
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index e745a3c..2371262 100644
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -328,8 +328,14 @@
 --no-ext-diff::
 	Disallow external diff drivers.
 
---ignore-submodules::
-	Ignore changes to submodules in the diff generation.
+--ignore-submodules[=<when>]::
+	Ignore changes to submodules in the diff generation. <when> can be
+	either "untracked", "dirty" or "all", which is the default. When
+	"untracked" is used submodules are not considered dirty when they only
+	contain untracked content (but they are still scanned for modified
+	content). Using "dirty" ignores all changes to the work tree of submodules,
+	only changes to the commits stored in the superproject are shown (this was
+	the behavior until 1.7.0). Using "all" hides all changes to submodules.
 
 --src-prefix=<prefix>::
 	Show the given source prefix instead of "a/".
diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt
index 58c8d65..9ebbe94 100644
--- a/Documentation/git-cat-file.txt
+++ b/Documentation/git-cat-file.txt
@@ -9,14 +9,15 @@
 SYNOPSIS
 --------
 [verse]
-'git cat-file' (-t | -s | -e | -p | <type>) <object>
+'git cat-file' (-t | -s | -e | -p | <type> | --textconv ) <object>
 'git cat-file' (--batch | --batch-check) < <list-of-objects>
 
 DESCRIPTION
 -----------
 In its first form, the command provides the content or the type of an object in
 the repository. The type is required unless '-t' or '-p' is used to find the
-object type, or '-s' is used to find the object size.
+object type, or '-s' is used to find the object size, or '--textconv' is used
+(which implies type "blob").
 
 In the second form, a list of objects (separated by linefeeds) is provided on
 stdin, and the SHA1, type, and size of each object is printed on stdout.
@@ -51,6 +52,11 @@
 	or to ask for a "blob" with <object> being a tag object that
 	points at it.
 
+--textconv::
+	Show the content as transformed by a textconv filter. In this case,
+	<object> has be of the form <treeish>:<path>, or :<path> in order
+	to apply the filter to the content recorded in the index at <path>.
+
 --batch::
 	Print the SHA1, type, size, and contents of each object provided on
 	stdin. May not be combined with any other options or arguments.
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt
index afda5c3..261dd90 100644
--- a/Documentation/git-checkout.txt
+++ b/Documentation/git-checkout.txt
@@ -15,33 +15,41 @@
 
 DESCRIPTION
 -----------
-
-When <paths> are not given, this command switches branches by
-updating the index, working tree, and HEAD to reflect the specified
+Updates files in the working tree to match the version in the index
+or the specified tree.  If no paths are given, 'git checkout' will
+also update `HEAD` to set the specified branch as the current
 branch.
 
-If `-b` is given, a new branch is created and checked out, as if
-linkgit:git-branch[1] were called; in this case you can
-use the --track or --no-track options, which will be passed to `git
-branch`.  As a convenience, --track without `-b` implies branch
-creation; see the description of --track below.
+'git checkout' [<branch>]::
+'git checkout' -b <new branch> [<start point>]::
 
-When <paths> or --patch are given, this command does *not* switch
-branches.  It updates the named paths in the working tree from
-the index file, or from a named <tree-ish> (most often a commit).  In
-this case, the `-b` and `--track` options are meaningless and giving
-either of them results in an error. The <tree-ish> argument can be
-used to specify a specific tree-ish (i.e. commit, tag or tree)
-to update the index for the given paths before updating the
-working tree.
+	This form switches branches by updating the index, working
+	tree, and HEAD to reflect the specified branch.
++
+If `-b` is given, a new branch is created as if linkgit:git-branch[1]
+were called and then checked out; in this case you can
+use the `--track` or `--no-track` options, which will be passed to
+'git branch'.  As a convenience, `--track` without `-b` implies branch
+creation; see the description of `--track` below.
 
-The index may contain unmerged entries after a failed merge.  By
-default, if you try to check out such an entry from the index, the
+'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...::
+
+	When <paths> or `--patch` are given, 'git checkout' *not* switch
+	branches.  It updates the named paths in the working tree from
+	the index file or from a named <tree-ish> (most often a commit).  In
+	this case, the `-b` and `--track` options are meaningless and giving
+	either of them results in an error. The <tree-ish> argument can be
+	used to specify a specific tree-ish (i.e. commit, tag or tree)
+	to update the index for the given paths before updating the
+	working tree.
++
+The index may contain unmerged entries because of a previous failed merge.
+By default, if you try to check out such an entry from the index, the
 checkout operation will fail and nothing will be checked out.
-Using -f will ignore these unmerged entries.  The contents from a
+Using `-f` will ignore these unmerged entries.  The contents from a
 specific side of the merge can be checked out of the index by
-using --ours or --theirs.  With -m, changes made to the working tree
-file can be discarded to recreate the original conflicted merge result.
+using `--ours` or `--theirs`.  With `-m`, changes made to the working tree
+file can be discarded to re-create the original conflicted merge result.
 
 OPTIONS
 -------
@@ -91,22 +99,29 @@
 	details.
 
 --orphan::
-	Create a new branch named <new_branch>, unparented to any other
-	branch.  The new branch you switch to does not have any commit
-	and after the first one it will become the root of a new history
-	completely unconnected from all the other branches.
+	Create a new 'orphan' branch, named <new_branch>, started from
+	<start_point> and switch to it.  The first commit made on this
+	new branch will have no parents and it will be the root of a new
+	history totally disconnected from all the other branches and
+	commits.
 +
-When you use "--orphan", the index and the working tree are kept intact.
-This allows you to start a new history that records set of paths similar
-to that of the start-point commit, which is useful when you want to keep
-different branches for different audiences you are working to like when
-you have an open source and commercial versions of a software, for example.
+The index and the working tree are adjusted as if you had previously run
+"git checkout <start_point>".  This allows you to start a new history
+that records a set of paths similar to <start_point> by easily running
+"git commit -a" to make the root commit.
 +
-If you want to start a disconnected history that records set of paths
-totally different from the original branch, you may want to first clear
-the index and the working tree, by running "git rm -rf ." from the
-top-level of the working tree, before preparing your files (by copying
-from elsewhere, extracting a tarball, etc.) in the working tree.
+This can be useful when you want to publish the tree from a commit
+without exposing its full history. You might want to do this to publish
+an open source branch of a project whose current tree is "clean", but
+whose full history contains proprietary or otherwise encumbered bits of
+code.
++
+If you want to start a disconnected history that records a set of paths
+that is totally different from the one of <start_point>, then you should
+clear the index and the working tree right after creating the orphan
+branch by running "git rm -rf ." from the top level of the working tree.
+Afterwards you will be ready to prepare your new files, repopulating the
+working tree, by copying them from elsewhere, extracting a tarball, etc.
 
 -m::
 --merge::
diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt
index d71607a..ca485db 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -3,24 +3,28 @@
 
 NAME
 ----
-git-cherry-pick - Apply the change introduced by an existing commit
+git-cherry-pick - Apply the changes introduced by some existing commits
 
 SYNOPSIS
 --------
-'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>
+'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>...
 
 DESCRIPTION
 -----------
-Given one existing commit, apply the change the patch introduces, and record a
-new commit that records it.  This requires your working tree to be clean (no
-modifications from the HEAD commit).
+
+Given one or more existing commits, apply the change each one
+introduces, recording a new commit for each.  This requires your
+working tree to be clean (no modifications from the HEAD commit).
 
 OPTIONS
 -------
-<commit>::
-	Commit to cherry-pick.
+<commit>...::
+	Commits to cherry-pick.
 	For a more complete list of ways to spell commits, see the
 	"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1].
+	Sets of commits can be passed but no traversal is done by
+	default, as if the '--no-walk' option was specified, see
+	linkgit:git-rev-list[1].
 
 -e::
 --edit::
@@ -55,10 +59,10 @@
 
 -n::
 --no-commit::
-	Usually the command automatically creates a commit.
-	This flag applies the change necessary to cherry-pick
-	the named commit to your working tree and the index,
-	but does not make the commit.  In addition, when this
+	Usually the command automatically creates a sequence of commits.
+	This flag applies the changes necessary to cherry-pick
+	each named commit to your working tree and the index,
+	without making any commit.  In addition, when this
 	option is used, your index does not have to match the
 	HEAD commit.  The cherry-pick is done against the
 	beginning state of your index.
@@ -75,6 +79,47 @@
 	cherry-pick'ed commit, then a fast forward to this commit will
 	be performed.
 
+EXAMPLES
+--------
+git cherry-pick master::
+
+	Apply the change introduced by the commit at the tip of the
+	master branch and create a new commit with this change.
+
+git cherry-pick ..master::
+git cherry-pick ^HEAD master::
+
+	Apply the changes introduced by all commits that are ancestors
+	of master but not of HEAD to produce new commits.
+
+git cherry-pick master\~4 master~2::
+
+	Apply the changes introduced by the fifth and third last
+	commits pointed to by master and create 2 new commits with
+	these changes.
+
+git cherry-pick -n master~1 next::
+
+	Apply to the working tree and the index the changes introduced
+	by the second last commit pointed to by master and by the last
+	commit pointed to by next, but do not create any commit with
+	these changes.
+
+git cherry-pick --ff ..next::
+
+	If history is linear and HEAD is an ancestor of next, update
+	the working tree and advance the HEAD pointer to match next.
+	Otherwise, apply the changes introduced by those commits that
+	are in next but not HEAD to the current branch, creating a new
+	commit for each new change.
+
+git rev-list --reverse master \-- README | git cherry-pick -n --stdin::
+
+	Apply the changes introduced by all commits on the master
+	branch that touched README to the working tree and index,
+	so the result can be inspected and made into a single new
+	commit if suitable.
+
 Author
 ------
 Written by Junio C Hamano <gitster@pobox.com>
@@ -83,6 +128,10 @@
 --------------
 Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
 
+SEE ALSO
+--------
+linkgit:git-revert[1]
+
 GIT
 ---
 Part of the linkgit:git[1] suite
diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt
index c27ca43..7004dd2 100644
--- a/Documentation/git-cvsserver.txt
+++ b/Documentation/git-cvsserver.txt
@@ -369,16 +369,13 @@
 which causes the cvs client to treat them as a text files, subject
 to crlf conversion on some platforms.
 
-You can make the server use `crlf` attributes to set the '-k' modes
-for files by setting the `gitcvs.usecrlfattr` config variable.
-In this case, if `crlf` is explicitly unset ('-crlf'), then the
-server will set '-kb' mode for binary files. If `crlf` is set,
-then the '-k' mode will explicitly be left blank.  See
-also linkgit:gitattributes[5] for more information about the `crlf`
-attribute.
+You can make the server use the end-of-line conversion attributes to
+set the '-k' modes for files by setting the `gitcvs.usecrlfattr`
+config variable.  See linkgit:gitattributes[5] for more information
+about end-of-line conversion.
 
 Alternatively, if `gitcvs.usecrlfattr` config is not enabled
-or if the `crlf` attribute is unspecified for a filename, then
+or the attributes do not allow automatic detection for a filename, then
 the server uses the `gitcvs.allbinary` config for the default setting.
 If `gitcvs.allbinary` is set, then file not otherwise
 specified will default to '-kb' mode. Otherwise the '-k' mode
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 835fb71..c8c81e8 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -13,6 +13,7 @@
 		   [--no-thread | --thread[=<style>]]
 		   [(--attach|--inline)[=<boundary>] | --no-attach]
 		   [-s | --signoff]
+		   [--signature=<signature> | --no-signature]
 		   [-n | --numbered | -N | --no-numbered]
 		   [--start-number <n>] [--numbered-files]
 		   [--in-reply-to=Message-Id] [--suffix=.<sfx>]
@@ -180,6 +181,12 @@
 	containing the shortlog and the overall diffstat.  You can
 	fill in a description in the file before sending it out.
 
+--[no]-signature=<signature>::
+	Add a signature to each message produced. Per RFC 3676 the signature
+	is separated from the body by a line with '-- ' on it. If the
+	signature option is omitted the signature defaults to the git version
+	number.
+
 --suffix=.<sfx>::
 	Instead of using `.patch` as the suffix for generated
 	filenames, use specified suffix.  A common alternative is
diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index 4b32322..5474dd7 100644
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -14,6 +14,7 @@
 	   [-E | --extended-regexp] [-G | --basic-regexp]
 	   [-F | --fixed-strings] [-n]
 	   [-l | --files-with-matches] [-L | --files-without-match]
+	   [(-O | --open-files-in-pager) [<pager>]]
 	   [-z | --null]
 	   [-c | --count] [--all-match] [-q | --quiet]
 	   [--max-depth <depth>]
@@ -104,6 +105,13 @@
 	For better compatibility with 'git diff', `--name-only` is a
 	synonym for `--files-with-matches`.
 
+-O [<pager>]::
+--open-files-in-pager [<pager>]::
+	Open the matching files in the pager (not the output of 'grep').
+	If the pager happens to be "less" or "vi", and the user
+	specified only one pattern, the first file is positioned at
+	the first match automatically.
+
 -z::
 --null::
 	Output \0 instead of the character that normally follows a
@@ -183,7 +191,7 @@
 Examples
 --------
 
-git grep 'time_t' -- '*.[ch]'::
+git grep 'time_t' \-- '*.[ch]'::
 	Looks for `time_t` in all tracked .c and .h files in the working
 	directory and its subdirectories.
 
diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt
index 50ba2e4..be23ad2 100644
--- a/Documentation/git-rebase.txt
+++ b/Documentation/git-rebase.txt
@@ -310,6 +310,11 @@
 -p::
 --preserve-merges::
 	Instead of ignoring merges, try to recreate them.
++
+This uses the `--interactive` machinery internally, but combining it
+with the `--interactive` option explicitly is generally not a good
+idea unless you know what you are doing (see BUGS below).
+
 
 --root::
 	Rebase all commits reachable from <branch>, instead of
@@ -611,6 +616,28 @@
 case" recovery too!
 
 
+BUGS
+----
+The todo list presented by `--preserve-merges --interactive` does not
+represent the topology of the revision graph.  Editing commits and
+rewording their commit messages should work fine, but attempts to
+reorder commits tend to produce counterintuitive results.
+
+For example, an attempt to rearrange
+------------
+1 --- 2 --- 3 --- 4 --- 5
+------------
+to
+------------
+1 --- 2 --- 4 --- 3 --- 5
+------------
+by moving the "pick 4" line will result in the following history:
+------------
+	3
+       /
+1 --- 2 --- 4 --- 5
+------------
+
 Authors
 ------
 Written by Junio C Hamano <gitster@pobox.com> and
diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt
index 8db600f..833a2a2 100644
--- a/Documentation/git-rev-parse.txt
+++ b/Documentation/git-rev-parse.txt
@@ -256,7 +256,7 @@
   the branch the ref is set to build on top of.  Missing ref defaults
   to the current branch.
 
-* A suffix '{caret}' to a revision parameter means the first parent of
+* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of
   that commit object.  '{caret}<n>' means the <n>th parent (i.e.
   'rev{caret}'
   is equivalent to 'rev{caret}1').  As a special rule,
@@ -282,21 +282,24 @@
   and dereference the tag recursively until a non-tag object is
   found.
 
-* A colon, followed by a slash, followed by a text: this names
+* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names
   a commit whose commit message starts with the specified text.
   This name returns the youngest matching commit which is
   reachable from any ref.  If the commit message starts with a
   '!', you have to repeat that;  the special sequence ':/!',
   followed by something else than '!' is reserved for now.
 
-* A suffix ':' followed by a path; this names the blob or tree
+* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree
   at the given path in the tree-ish object named by the part
   before the colon.
+  ':path' (with an empty part before the colon, e.g. `:README`)
+  is a special case of the syntax described next: content
+  recorded in the index at the given path.
 
 * A colon, optionally followed by a stage number (0 to 3) and a
-  colon, followed by a path; this names a blob object in the
-  index at the given path.  Missing stage number (and the colon
-  that follows it) names a stage 0 entry. During a merge, stage
+  colon, followed by a path (e.g. `:0:README`); this names a blob object in the
+  index at the given path. Missing stage number (and the colon
+  that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage
   1 is the common ancestor, stage 2 is the target branch's version
   (typically the current branch), and stage 3 is the version from
   the branch being merged.
diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt
index c66bf80..dea4f53 100644
--- a/Documentation/git-revert.txt
+++ b/Documentation/git-revert.txt
@@ -3,20 +3,22 @@
 
 NAME
 ----
-git-revert - Revert an existing commit
+git-revert - Revert some existing commits
 
 SYNOPSIS
 --------
-'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>
+'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>...
 
 DESCRIPTION
 -----------
-Given one existing commit, revert the change the patch introduces, and record a
-new commit that records it.  This requires your working tree to be clean (no
-modifications from the HEAD commit).
 
-Note: 'git revert' is used to record a new commit to reverse the
-effect of an earlier commit (often a faulty one).  If you want to
+Given one or more existing commits, revert the changes that the
+related patches introduce, and record some new commits that record
+them.  This requires your working tree to be clean (no modifications
+from the HEAD commit).
+
+Note: 'git revert' is used to record some new commits to reverse the
+effect of some earlier commits (often only a faulty one).  If you want to
 throw away all uncommitted changes in your working directory, you
 should see linkgit:git-reset[1], particularly the '--hard' option.  If
 you want to extract specific files as they were in another commit, you
@@ -26,10 +28,13 @@
 
 OPTIONS
 -------
-<commit>::
-	Commit to revert.
+<commit>...::
+	Commits to revert.
 	For a more complete list of ways to spell commit names, see
 	"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1].
+	Sets of commits can also be given but no traversal is done by
+	default, see linkgit:git-rev-list[1] and its '--no-walk'
+	option.
 
 -e::
 --edit::
@@ -59,11 +64,11 @@
 
 -n::
 --no-commit::
-	Usually the command automatically creates a commit with
-	a commit log message stating which commit was
-	reverted.  This flag applies the change necessary
-	to revert the named commit to your working tree
-	and the index, but does not make the commit.  In addition,
+	Usually the command automatically creates some commits with
+	commit log messages stating which commits were
+	reverted.  This flag applies the changes necessary
+	to revert the named commits to your working tree
+	and the index, but does not make the commits.  In addition,
 	when this option is used, your index does not have to match
 	the HEAD commit.  The revert is done against the
 	beginning state of your index.
@@ -75,6 +80,20 @@
 --signoff::
 	Add Signed-off-by line at the end of the commit message.
 
+EXAMPLES
+--------
+git revert HEAD~3::
+
+	Revert the changes specified by the fourth last commit in HEAD
+	and create a new commit with the reverted changes.
+
+git revert -n master\~5..master~2::
+
+	Revert the changes done by commits from the fifth last commit
+	in master (included) to the third last commit in master
+	(included), but do not create any commit with the reverted
+	changes. The revert only modifies the working tree and the
+	index.
 
 Author
 ------
@@ -84,6 +103,10 @@
 --------------
 Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
 
+SEE ALSO
+--------
+linkgit:git-cherry-pick[1]
+
 GIT
 ---
 Part of the linkgit:git[1] suite
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 12622fc..c283084 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -101,6 +101,15 @@
 +
 The --to option must be repeated for each user you want on the to list.
 
+--8bit-encoding=<encoding>::
+	When encountering a non-ASCII message or subject that does not
+	declare its encoding, add headers/quoting to indicate it is
+	encoded in <encoding>.  Default is the value of the
+	'sendemail.assume8bitEncoding'; if that is unspecified, this
+	will be prompted for if any non-ASCII files are encountered.
++
+Note that no attempts whatsoever are made to validate the encoding.
+
 
 Sending
 ~~~~~~~
diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt
index fd0fe7c..2fd054c 100644
--- a/Documentation/git-status.txt
+++ b/Documentation/git-status.txt
@@ -53,6 +53,17 @@
 used to change the default for when the option is not
 specified.
 
+--ignore-submodules[=<when>]::
+	Ignore changes to submodules when looking for changes. <when> can be
+	either "untracked", "dirty" or "all", which is the default. When
+	"untracked" is used submodules are not considered dirty when they only
+	contain untracked content (but they are still scanned for modified
+	content). Using "dirty" ignores all changes to the work tree of submodules,
+	only changes to the commits stored in the superproject are shown (this was
+	the behavior before 1.7.0). Using "all" hides all changes to submodules
+	(and suppresses the output of submodule summaries when the config option
+	`status.submodulesummary` is set).
+
 -z::
 	Terminate entries with NUL, instead of LF.  This implies
 	the `--porcelain` output format if no other format is given.
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 0523a57..564586b 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -92,53 +92,154 @@
 git stores the contents you prepare in the working tree in the
 repository upon 'git add' and 'git commit'.
 
-`crlf`
+`text`
 ^^^^^^
 
-This attribute controls the line-ending convention.
+This attribute enables and controls end-of-line normalization.  When a
+text file is normalized, its line endings are converted to LF in the
+repository.  To control what line ending style is used in the working
+directory, use the `eol` attribute for a single file and the
+`core.eol` configuration variable for all text files.
 
 Set::
 
-	Setting the `crlf` attribute on a path is meant to mark
-	the path as a "text" file.  'core.autocrlf' conversion
-	takes place without guessing the content type by
-	inspection.
+	Setting the `text` attribute on a path enables end-of-line
+	normalization and marks the path as a text file.  End-of-line
+	conversion takes place without guessing the content type.
 
 Unset::
 
-	Unsetting the `crlf` attribute on a path tells git not to
+	Unsetting the `text` attribute on a path tells git not to
 	attempt any end-of-line conversion upon checkin or checkout.
 
+Set to string value "auto"::
+
+	When `text` is set to "auto", the path is marked for automatic
+	end-of-line normalization.  If git decides that the content is
+	text, its line endings are normalized to LF on checkin.
+
 Unspecified::
 
-	Unspecified `crlf` attribute tells git to apply the
-	`core.autocrlf` conversion when the file content looks
-	like text.
+	If the `text` attribute is unspecified, git uses the
+	`core.autocrlf` configuration variable to determine if the
+	file should be converted.
 
-Set to string value "input"::
+Any other value causes git to act as if `text` has been left
+unspecified.
 
-	This is similar to setting the attribute to `true`, but
-	also forces git to act as if `core.autocrlf` is set to
-	`input` for the path.
+`eol`
+^^^^^
 
-Any other value set to `crlf` attribute is ignored and git acts
-as if the attribute is left unspecified.
+This attribute sets a specific line-ending style to be used in the
+working directory.  It enables end-of-line normalization without any
+content checks, effectively setting the `text` attribute.
 
+Set to string value "crlf"::
 
-The `core.autocrlf` conversion
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+	This setting forces git to normalize line endings for this
+	file on checkin and convert them to CRLF when the file is
+	checked out.
 
-If the configuration variable `core.autocrlf` is false, no
-conversion is done.
+Set to string value "lf"::
 
-When `core.autocrlf` is true, it means that the platform wants
-CRLF line endings for files in the working tree, and you want to
-convert them back to the normal LF line endings when checking
-in to the repository.
+	This setting forces git to normalize line endings to LF on
+	checkin and prevents conversion to CRLF when the file is
+	checked out.
 
-When `core.autocrlf` is set to "input", line endings are
-converted to LF upon checkin, but there is no conversion done
-upon checkout.
+Backwards compatibility with `crlf` attribute
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For backwards compatibility, the `crlf` attribute is interpreted as
+follows:
+
+------------------------
+crlf		text
+-crlf		-text
+crlf=input	eol=lf
+------------------------
+
+End-of-line conversion
+^^^^^^^^^^^^^^^^^^^^^^
+
+While git normally leaves file contents alone, it can be configured to
+normalize line endings to LF in the repository and, optionally, to
+convert them to CRLF when files are checked out.
+
+Here is an example that will make git normalize .txt, .vcproj and .sh
+files, ensure that .vcproj files have CRLF and .sh files have LF in
+the working directory, and prevent .jpg files from being normalized
+regardless of their content.
+
+------------------------
+*.txt		text
+*.vcproj	eol=crlf
+*.sh		eol=lf
+*.jpg		-text
+------------------------
+
+Other source code management systems normalize all text files in their
+repositories, and there are two ways to enable similar automatic
+normalization in git.
+
+If you simply want to have CRLF line endings in your working directory
+regardless of the repository you are working with, you can set the
+config variable "core.autocrlf" without changing any attributes.
+
+------------------------
+[core]
+	autocrlf = true
+------------------------
+
+This does not force normalization of all text files, but does ensure
+that text files that you introduce to the repository have their line
+endings normalized to LF when they are added, and that files that are
+already normalized in the repository stay normalized.
+
+If you want to interoperate with a source code management system that
+enforces end-of-line normalization, or you simply want all text files
+in your repository to be normalized, you should instead set the `text`
+attribute to "auto" for _all_ files.
+
+------------------------
+*	text=auto
+------------------------
+
+This ensures that all files that git considers to be text will have
+normalized (LF) line endings in the repository.  The `core.eol`
+configuration variable controls which line endings git will use for
+normalized files in your working directory; the default is to use the
+native line ending for your platform, or CRLF if `core.autocrlf` is
+set.
+
+NOTE: When `text=auto` normalization is enabled in an existing
+repository, any text files containing CRLFs should be normalized.  If
+they are not they will be normalized the next time someone tries to
+change them, causing unfortunate misattribution.  From a clean working
+directory:
+
+-------------------------------------------------
+$ echo "* text=auto" >>.gitattributes
+$ rm .git/index     # Remove the index to force git to
+$ git reset         # re-scan the working directory
+$ git status        # Show files that will be normalized
+$ git add -u
+$ git add .gitattributes
+$ git commit -m "Introduce end-of-line normalization"
+-------------------------------------------------
+
+If any files that should not be normalized show up in 'git status',
+unset their `text` attribute before running 'git add -u'.
+
+------------------------
+manual.pdf	-text
+------------------------
+
+Conversely, text files that git does not detect can have normalization
+enabled manually.
+
+------------------------
+weirdchars.txt	text
+------------------------
 
 If `core.safecrlf` is set to "true" or "warn", git verifies if
 the conversion is reversible for the current setting of
@@ -223,11 +324,11 @@
 In the check-in codepath, the worktree file is first converted
 with `filter` driver (if specified and corresponding driver
 defined), then the result is processed with `ident` (if
-specified), and then finally with `crlf` (again, if specified
+specified), and then finally with `text` (again, if specified
 and applicable).
 
 In the check-out codepath, the blob content is first converted
-with `crlf`, and then `ident` and fed to `filter`.
+with `text`, and then `ident` and fed to `filter`.
 
 
 Generating diff text
@@ -651,7 +752,7 @@
 produced for, any binary file you track.  You would need to specify e.g.
 
 ------------
-*.jpg -crlf -diff
+*.jpg -text -diff
 ------------
 
 but that may become cumbersome, when you have many attributes.  Using
@@ -664,7 +765,7 @@
 
 which is equivalent to the above.  Note that the attribute macros can only
 be "Set" (see the above example that sets "binary" macro as if it were an
-ordinary attribute --- setting it in turn unsets "crlf" and "diff").
+ordinary attribute --- setting it in turn unsets "text" and "diff").
 
 
 DEFINING ATTRIBUTE MACROS
@@ -675,7 +776,7 @@
 macro "binary" is equivalent to:
 
 ------------
-[attr]binary -diff -crlf
+[attr]binary -diff -text
 ------------
 
 
diff --git a/Documentation/install-webdoc.sh b/Documentation/install-webdoc.sh
index 2135a8e..34d02a2 100755
--- a/Documentation/install-webdoc.sh
+++ b/Documentation/install-webdoc.sh
@@ -12,7 +12,7 @@
 	then
 		: did not match
 	elif test -f "$T/$h" &&
-	   diff -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h"
+	   $DIFF -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h"
 	then
 		:; # up to date
 	else
diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt
index 8c68ce9..561cc9f 100644
--- a/Documentation/pretty-formats.txt
+++ b/Documentation/pretty-formats.txt
@@ -159,6 +159,10 @@
 immediately precede the expansion are deleted if and only if the
 placeholder expands to an empty string.
 
+If you add a ` ` (space) after '%' of a placeholder, a space
+is inserted immediately before the expansion if and only if the
+placeholder expands to a non-empty string.
+
 * 'tformat:'
 +
 The 'tformat:' format works exactly like 'format:', except that it
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
index b9fb7a8..cc562a0 100644
--- a/Documentation/rev-list-options.txt
+++ b/Documentation/rev-list-options.txt
@@ -98,6 +98,15 @@
 This implies the '--topo-order' option by default, but the
 '--date-order' option may also be specified.
 
+ifdef::git-rev-list[]
+--count::
+	Print a number stating how many commits would have been
+	listed, and suppress all other output.  When used together
+	with '--left-right', instead print the counts for left and
+	right commits, separated by a tab.
+endif::git-rev-list[]
+
+
 ifndef::git-rev-list[]
 Diff Formatting
 ~~~~~~~~~~~~~~~
@@ -384,6 +393,14 @@
 	merges from the resulting history, as there are no selected
 	commits contributing to this merge.
 
+--ancestry-path::
+
+	When given a range of commits to display (e.g. 'commit1..commit2'
+	or 'commit2 {caret}commit1'), only display commits that exist
+	directly on the ancestry chain between the 'commit1' and
+	'commit2', i.e. commits that are both descendants of 'commit1',
+	and ancestors of 'commit2'.
+
 A more detailed explanation follows.
 
 Suppose you specified `foo` as the <paths>.  We shall call commits
@@ -440,7 +457,7 @@
 +
 -----------------------------------------------------------------------
 	  .-A---N---O
-	 /         /
+	 /     /   /
 	I---------D
 -----------------------------------------------------------------------
 +
@@ -511,8 +528,6 @@
 one of the parents is TREESAME, we follow only that one, so the other
 sides of the merge are never walked.
 
-Finally, there is a fourth simplification mode available:
-
 --simplify-merges::
 
 	First, build a history graph in the same way that
@@ -554,6 +569,46 @@
   removed completely, because it had one parent and is TREESAME.
 --
 
+Finally, there is a fifth simplification mode available:
+
+--ancestry-path::
+
+	Limit the displayed commits to those directly on the ancestry
+	chain between the "from" and "to" commits in the given commit
+	range. I.e. only display commits that are ancestor of the "to"
+	commit, and descendants of the "from" commit.
++
+As an example use case, consider the following commit history:
++
+-----------------------------------------------------------------------
+	    D---E-------F
+	   /     \       \
+	  B---C---G---H---I---J
+	 /                     \
+	A-------K---------------L--M
+-----------------------------------------------------------------------
++
+A regular 'D..M' computes the set of commits that are ancestors of `M`,
+but excludes the ones that are ancestors of `D`. This is useful to see
+what happened to the history leading to `M` since `D`, in the sense
+that "what does `M` have that did not exist in `D`". The result in this
+example would be all the commits, except `A` and `B` (and `D` itself,
+of course).
++
+When we want to find out what commits in `M` are contaminated with the
+bug introduced by `D` and need fixing, however, we might want to view
+only the subset of 'D..M' that are actually descendants of `D`, i.e.
+excluding `C` and `K`. This is exactly what the '\--ancestry-path'
+option does. Applied to the 'D..M' range, it results in:
++
+-----------------------------------------------------------------------
+		E-------F
+		 \       \
+		  G---H---I---J
+			       \
+				L--M
+-----------------------------------------------------------------------
+
 The '\--simplify-by-decoration' option allows you to view only the
 big picture of the topology of the history, by omitting commits
 that are not referenced by tags.  Commits are marked as !TREESAME
diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt
index 44876fa..f18b4f4 100644
--- a/Documentation/technical/api-run-command.txt
+++ b/Documentation/technical/api-run-command.txt
@@ -231,8 +231,9 @@
 
 
 There are serious restrictions on what the asynchronous function can do
-because this facility is implemented by a pipe to a forked process on
-UNIX, but by a thread in the same address space on Windows:
+because this facility is implemented by a thread in the same address
+space on most platforms (when pthreads is available), but by a pipe to
+a forked process otherwise:
 
 . It cannot change the program's state (global variables, environment,
   etc.) in a way that the caller notices; in other words, .in and .out
diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt
index 6d8c24b..3f575bd 100644
--- a/Documentation/technical/api-string-list.txt
+++ b/Documentation/technical/api-string-list.txt
@@ -38,8 +38,8 @@
 int i;
 
 memset(&list, 0, sizeof(struct string_list));
-string_list_append("foo", &list);
-string_list_append("bar", &list);
+string_list_append(&list, "foo");
+string_list_append(&list, "bar");
 for (i = 0; i < list.nr; i++)
 	printf("%s\n", list.items[i].string)
 ----
diff --git a/Makefile b/Makefile
index b979fb7..9aca8a1 100644
--- a/Makefile
+++ b/Makefile
@@ -8,6 +8,12 @@
 # Define SANE_TOOL_PATH to a colon-separated list of paths to prepend
 # to PATH if your tools in /usr/bin are broken.
 #
+# Define SOCKLEN_T to a suitable type (such as 'size_t') if your
+# system headers do not define a socklen_t type.
+#
+# Define INLINE to a suitable substitute (such as '__inline' or '') if git
+# fails to compile with errors about undefined inline functions or similar.
+#
 # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
 # or vsnprintf() return -1 instead of number of characters which would
 # have been written to the final string if enough space had been available.
@@ -227,6 +233,8 @@
 #
 # Define CHECK_HEADER_DEPENDENCIES to check for problems in the hard-coded
 # dependency rules.
+#
+# Define NATIVE_CRLF if your platform uses CRLF for line endings.
 
 GIT-VERSION-FILE: FORCE
 	@$(SHELL_PATH) ./GIT-VERSION-GEN
@@ -249,7 +257,7 @@
 
 CFLAGS = -g -O2 -Wall
 LDFLAGS =
-ALL_CFLAGS = $(CFLAGS)
+ALL_CFLAGS = $(CPPFLAGS) $(CFLAGS)
 ALL_LDFLAGS = $(LDFLAGS)
 STRIP ?= strip
 
@@ -286,11 +294,12 @@
 # DESTDIR=
 pathsep = :
 
-export prefix bindir sharedir sysconfdir
+export prefix bindir sharedir sysconfdir gitwebdir
 
 CC = gcc
 AR = ar
 RM = rm -f
+DIFF = diff
 TAR = tar
 FIND = find
 INSTALL = install
@@ -298,6 +307,7 @@
 TCL_PATH = tclsh
 TCLTK_PATH = wish
 PTHREAD_LIBS = -lpthread
+PTHREAD_CFLAGS =
 
 export TCL_PATH TCLTK_PATH
 
@@ -741,6 +751,13 @@
 # because maintaining the nesting to match is a pain.  If
 # we had "elif" things would have been much nicer...
 
+ifeq ($(uname_S),OSF1)
+	# Need this for u_short definitions et al
+	BASIC_CFLAGS += -D_OSF_SOURCE
+	SOCKLEN_T = int
+	NO_STRTOULL = YesPlease
+	NO_NSEC = YesPlease
+endif
 ifeq ($(uname_S),Linux)
 	NO_STRLCPY = YesPlease
 	NO_MKSTEMPS = YesPlease
@@ -815,6 +832,18 @@
 	NO_MKDTEMP = YesPlease
 	NO_MKSTEMPS = YesPlease
 	NO_REGEX = YesPlease
+	ifeq ($(uname_R),5.6)
+		SOCKLEN_T = int
+		NO_HSTRERROR = YesPlease
+		NO_IPV6 = YesPlease
+		NO_SOCKADDR_STORAGE = YesPlease
+		NO_UNSETENV = YesPlease
+		NO_SETENV = YesPlease
+		NO_STRLCPY = YesPlease
+		NO_C99_FORMAT = YesPlease
+		NO_STRTOUMAX = YesPlease
+		GIT_TEST_CMP = cmp
+	endif
 	ifeq ($(uname_R),5.7)
 		NEEDS_RESOLV = YesPlease
 		NO_IPV6 = YesPlease
@@ -824,18 +853,21 @@
 		NO_STRLCPY = YesPlease
 		NO_C99_FORMAT = YesPlease
 		NO_STRTOUMAX = YesPlease
+		GIT_TEST_CMP = cmp
 	endif
 	ifeq ($(uname_R),5.8)
 		NO_UNSETENV = YesPlease
 		NO_SETENV = YesPlease
 		NO_C99_FORMAT = YesPlease
 		NO_STRTOUMAX = YesPlease
+		GIT_TEST_CMP = cmp
 	endif
 	ifeq ($(uname_R),5.9)
 		NO_UNSETENV = YesPlease
 		NO_SETENV = YesPlease
 		NO_C99_FORMAT = YesPlease
 		NO_STRTOUMAX = YesPlease
+		GIT_TEST_CMP = cmp
 	endif
 	INSTALL = /usr/ucb/install
 	TAR = gtar
@@ -913,7 +945,13 @@
 	BASIC_CFLAGS += -D_LARGE_FILES
 	ifeq ($(shell expr "$(uname_V)" : '[1234]'),1)
 		NO_PTHREADS = YesPlease
+	else
+		PTHREAD_LIBS = -lpthread
 	endif
+	ifeq ($(shell expr "$(uname_V).$(uname_R)" : '5\.1'),3)
+		INLINE=''
+	endif
+	GIT_TEST_CMP = cmp
 endif
 ifeq ($(uname_S),GNU)
 	# GNU/Hurd
@@ -958,6 +996,7 @@
 	NEEDS_LIBGEN = YesPlease
 endif
 ifeq ($(uname_S),HP-UX)
+	INLINE = __inline
 	NO_IPV6=YesPlease
 	NO_SETENV=YesPlease
 	NO_STRCASESTR=YesPlease
@@ -969,6 +1008,20 @@
 	NO_HSTRERROR = YesPlease
 	NO_SYS_SELECT_H = YesPlease
 	SNPRINTF_RETURNS_BOGUS = YesPlease
+	NO_NSEC = YesPlease
+	ifeq ($(uname_R),B.11.00)
+		NO_INET_NTOP = YesPlease
+		NO_INET_PTON = YesPlease
+	endif
+	ifeq ($(uname_R),B.10.20)
+		# Override HP-UX 11.x setting:
+		INLINE =
+		SOCKLEN_T = size_t
+		NO_PREAD = YesPlease
+		NO_INET_NTOP = YesPlease
+		NO_INET_PTON = YesPlease
+	endif
+	GIT_TEST_CMP = cmp
 endif
 ifeq ($(uname_S),Windows)
 	GIT_VERSION := $(GIT_VERSION).MSVC
@@ -1005,6 +1058,7 @@
 	NO_CURL = YesPlease
 	NO_PYTHON = YesPlease
 	BLK_SHA1 = YesPlease
+	NATIVE_CRLF = YesPlease
 
 	CC = compat/vcbuild/scripts/clink.pl
 	AR = compat/vcbuild/scripts/lib.pl
@@ -1094,6 +1148,14 @@
 BROKEN_PATH_FIX = '/^\# @@BROKEN_PATH_FIX@@$$/d'
 endif
 
+ifneq (,$(INLINE))
+	BASIC_CFLAGS += -Dinline=$(INLINE)
+endif
+
+ifneq (,$(SOCKLEN_T))
+	BASIC_CFLAGS += -Dsocklen_t=$(SOCKLEN_T)
+endif
+
 ifeq ($(uname_S),Darwin)
 	ifndef NO_FINK
 		ifeq ($(shell test -d /sw/lib && echo y),y)
@@ -1365,6 +1427,7 @@
 ifdef NO_PTHREADS
 	BASIC_CFLAGS += -DNO_PTHREADS
 else
+	BASIC_CFLAGS += $(PTHREAD_CFLAGS)
 	EXTLIBS += $(PTHREAD_LIBS)
 	LIB_OBJS += thread-utils.o
 endif
@@ -1389,6 +1452,10 @@
        COMPAT_OBJS += compat/nedmalloc/nedmalloc.o
 endif
 
+ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT
+	export GIT_TEST_CMP_USE_COPIED_CONTEXT
+endif
+
 ifeq ($(TCLTK_PATH),)
 NO_TCLTK=NoThanks
 endif
@@ -1451,6 +1518,7 @@
 PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
 PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH))
 TCLTK_PATH_SQ = $(subst ','\'',$(TCLTK_PATH))
+DIFF_SQ = $(subst ','\'',$(DIFF))
 
 LIBS = $(GITLIBS) $(EXTLIBS)
 
@@ -1477,7 +1545,7 @@
 ALL_CFLAGS += $(BASIC_CFLAGS)
 ALL_LDFLAGS += $(BASIC_LDFLAGS)
 
-export TAR INSTALL DESTDIR SHELL_PATH
+export DIFF TAR INSTALL DESTDIR SHELL_PATH
 
 
 ### Build rules
@@ -1539,6 +1607,7 @@
 $(RM) $@ $@+ && \
 sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
     -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
+    -e 's|@@DIFF@@|$(DIFF_SQ)|' \
     -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
     -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
     -e $(BROKEN_PATH_FIX) \
@@ -1884,10 +1953,18 @@
 GIT-BUILD-OPTIONS: FORCE
 	@echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
 	@echo PERL_PATH=\''$(subst ','\'',$(PERL_PATH_SQ))'\' >>$@
+	@echo DIFF=\''$(subst ','\'',$(subst ','\'',$(DIFF)))'\' >>$@
+	@echo PYTHON_PATH=\''$(subst ','\'',$(PYTHON_PATH_SQ))'\' >>$@
 	@echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
 	@echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
 	@echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
 	@echo NO_PYTHON=\''$(subst ','\'',$(subst ','\'',$(NO_PYTHON)))'\' >>$@
+ifdef GIT_TEST_CMP
+	@echo GIT_TEST_CMP=\''$(subst ','\'',$(subst ','\'',$(GIT_TEST_CMP)))'\' >>$@
+endif
+ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT
+	@echo GIT_TEST_CMP_USE_COPIED_CONTEXT=YesPlease >>$@
+endif
 
 ### Detect Tck/Tk interpreter path changes
 ifndef NO_TCLTK
@@ -1982,7 +2059,7 @@
 	$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
 ifndef NO_PERL
 	$(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
-	$(MAKE) -C gitweb gitwebdir=$(gitwebdir_SQ) install
+	$(MAKE) -C gitweb install
 endif
 ifndef NO_PYTHON
 	$(MAKE) -C git_remote_helpers prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..d399de2
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,40 @@
+dnl Check for socklen_t: historically on BSD it is an int, and in
+dnl POSIX 1g it is a type of its own, but some platforms use different
+dnl types for the argument to getsockopt, getpeername, etc.  So we
+dnl have to test to find something that will work.
+AC_DEFUN([TYPE_SOCKLEN_T],
+[
+   AC_CHECK_TYPE([socklen_t], ,[
+      AC_MSG_CHECKING([for socklen_t equivalent])
+      AC_CACHE_VAL([git_cv_socklen_t_equiv],
+      [
+         # Systems have either "struct sockaddr *" or
+         # "void *" as the second argument to getpeername
+         git_cv_socklen_t_equiv=
+         for arg2 in "struct sockaddr" void; do
+            for t in int size_t unsigned long "unsigned long"; do
+               AC_TRY_COMPILE([
+                  #include <sys/types.h>
+                  #include <sys/socket.h>
+
+                  int getpeername (int, $arg2 *, $t *);
+               ],[
+                  $t len;
+                  getpeername(0,0,&len);
+               ],[
+                  git_cv_socklen_t_equiv="$t"
+                  break 2
+               ])
+            done
+         done
+
+         if test "x$git_cv_socklen_t_equiv" = x; then
+            AC_MSG_ERROR([Cannot find a type to use in place of socklen_t])
+         fi
+      ])
+      AC_MSG_RESULT($git_cv_socklen_t_equiv)
+      AC_DEFINE_UNQUOTED(socklen_t, $git_cv_socklen_t_equiv,
+			[type to use in place of socklen_t if not defined])],
+      [#include <sys/types.h>
+#include <sys/socket.h>])
+])
diff --git a/attr.c b/attr.c
index 7467baf..8ba606c 100644
--- a/attr.c
+++ b/attr.c
@@ -287,7 +287,7 @@
 }
 
 static const char *builtin_attr[] = {
-	"[attr]binary -diff -crlf",
+	"[attr]binary -diff -text",
 	NULL,
 };
 
diff --git a/attr.h b/attr.h
index 450f49d..8b3f19b 100644
--- a/attr.h
+++ b/attr.h
@@ -34,7 +34,7 @@
 enum git_attr_direction {
 	GIT_ATTR_CHECKIN,
 	GIT_ATTR_CHECKOUT,
-	GIT_ATTR_INDEX,
+	GIT_ATTR_INDEX
 };
 void git_attr_set_direction(enum git_attr_direction, struct index_state *);
 
diff --git a/block-sha1/sha1.c b/block-sha1/sha1.c
index d893475..c0054a0 100644
--- a/block-sha1/sha1.c
+++ b/block-sha1/sha1.c
@@ -70,6 +70,7 @@
  */
 
 #if defined(__i386__) || defined(__x86_64__) || \
+    defined(_M_IX86) || defined(_M_X64) || \
     defined(__ppc__) || defined(__ppc64__) || \
     defined(__powerpc__) || defined(__powerpc64__) || \
     defined(__s390__) || defined(__s390x__)
@@ -236,13 +237,13 @@
 
 void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len)
 {
-	int lenW = ctx->size & 63;
+	unsigned int lenW = ctx->size & 63;
 
 	ctx->size += len;
 
 	/* Read the data into W and process blocks as they get full */
 	if (lenW) {
-		int left = 64 - lenW;
+		unsigned int left = 64 - lenW;
 		if (len < left)
 			left = len;
 		memcpy(lenW + (char *)ctx->W, data, left);
@@ -269,8 +270,8 @@
 	int i;
 
 	/* Pad with a binary 1 (ie 0x80), then zeroes, then length */
-	padlen[0] = htonl(ctx->size >> 29);
-	padlen[1] = htonl(ctx->size << 3);
+	padlen[0] = htonl((uint32_t)(ctx->size >> 29));
+	padlen[1] = htonl((uint32_t)(ctx->size << 3));
 
 	i = ctx->size & 63;
 	blk_SHA1_Update(ctx, pad, 1+ (63 & (55 - i)));
diff --git a/builtin.h b/builtin.h
index b614d12..ed6ee26 100644
--- a/builtin.h
+++ b/builtin.h
@@ -23,13 +23,13 @@
 	struct notes_tree **trees;
 	const char *cmd;
 	int enabled;
-	combine_notes_fn *combine;
+	combine_notes_fn combine;
 	struct string_list *refs;
 	int refs_from_env;
 	int mode_from_env;
 };
 
-combine_notes_fn *parse_combine_notes_fn(const char *v);
+combine_notes_fn parse_combine_notes_fn(const char *v);
 struct notes_rewrite_cfg *init_copy_notes_for_rewrite(const char *cmd);
 int copy_note_for_rewrite(struct notes_rewrite_cfg *c,
 			  const unsigned char *from_obj, const unsigned char *to_obj);
@@ -37,6 +37,8 @@
 
 extern int check_pager_config(const char *cmd);
 
+extern int textconv_object(const char *path, const unsigned char *sha1, char **buf, unsigned long *buf_size);
+
 extern int cmd_add(int argc, const char **argv, const char *prefix);
 extern int cmd_annotate(int argc, const char **argv, const char *prefix);
 extern int cmd_apply(int argc, const char **argv, const char *prefix);
diff --git a/builtin/add.c b/builtin/add.c
index 87d2980..17149cf 100644
--- a/builtin/add.c
+++ b/builtin/add.c
@@ -261,12 +261,14 @@
 {
 	char *file = xstrdup(git_path("ADD_EDIT.patch"));
 	const char *apply_argv[] = { "apply", "--recount", "--cached",
-		file, NULL };
+		NULL, NULL };
 	struct child_process child;
 	struct rev_info rev;
 	int out;
 	struct stat st;
 
+	apply_argv[3] = file;
+
 	git_config(git_diff_basic_config, NULL); /* no "diff" UI options */
 
 	if (read_cache() < 0)
diff --git a/builtin/apply.c b/builtin/apply.c
index 8fc5ec3..12ef9ea 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -56,7 +56,7 @@
 	nowarn_ws_error,
 	warn_on_ws_error,
 	die_on_ws_error,
-	correct_ws_error,
+	correct_ws_error
 } ws_error_action = warn_on_ws_error;
 static int whitespace_error;
 static int squelch_whitespace_errors = 5;
@@ -64,7 +64,7 @@
 
 static enum ws_ignore {
 	ignore_ws_none,
-	ignore_ws_change,
+	ignore_ws_change
 } ws_ignore_action = ignore_ws_none;
 
 
@@ -2628,7 +2628,7 @@
 	if (name == NULL)
 		return NULL;
 
-	item = string_list_lookup(name, &fn_table);
+	item = string_list_lookup(&fn_table, name);
 	if (item != NULL)
 		return (struct patch *)item->util;
 
@@ -2664,7 +2664,7 @@
 	 * file creations and copies
 	 */
 	if (patch->new_name != NULL) {
-		item = string_list_insert(patch->new_name, &fn_table);
+		item = string_list_insert(&fn_table, patch->new_name);
 		item->util = patch;
 	}
 
@@ -2673,7 +2673,7 @@
 	 * later chunks shouldn't patch old names
 	 */
 	if ((patch->new_name == NULL) || (patch->is_rename)) {
-		item = string_list_insert(patch->old_name, &fn_table);
+		item = string_list_insert(&fn_table, patch->old_name);
 		item->util = PATH_WAS_DELETED;
 	}
 }
@@ -2686,7 +2686,7 @@
 	while (patch) {
 		if ((patch->new_name == NULL) || (patch->is_rename)) {
 			struct string_list_item *item;
-			item = string_list_insert(patch->old_name, &fn_table);
+			item = string_list_insert(&fn_table, patch->old_name);
 			item->util = PATH_TO_BE_DELETED;
 		}
 		patch = patch->next;
@@ -3394,7 +3394,7 @@
 {
 	struct string_list_item *it;
 
-	it = string_list_append(name, &limit_by_name);
+	it = string_list_append(&limit_by_name, name);
 	it->util = exclude ? NULL : (void *) 1;
 }
 
diff --git a/builtin/blame.c b/builtin/blame.c
index 8506286..01e62fd 100644
--- a/builtin/blame.c
+++ b/builtin/blame.c
@@ -20,6 +20,7 @@
 #include "mailmap.h"
 #include "parse-options.h"
 #include "utf8.h"
+#include "userdiff.h"
 
 static char blame_usage[] = "git blame [options] [rev-opts] [rev] [--] file";
 
@@ -86,16 +87,50 @@
 };
 
 /*
+ * Prepare diff_filespec and convert it using diff textconv API
+ * if the textconv driver exists.
+ * Return 1 if the conversion succeeds, 0 otherwise.
+ */
+int textconv_object(const char *path,
+		    const unsigned char *sha1,
+		    char **buf,
+		    unsigned long *buf_size)
+{
+	struct diff_filespec *df;
+	struct userdiff_driver *textconv;
+
+	df = alloc_filespec(path);
+	fill_filespec(df, sha1, S_IFREG | 0664);
+	textconv = get_textconv(df);
+	if (!textconv) {
+		free_filespec(df);
+		return 0;
+	}
+
+	*buf_size = fill_textconv(textconv, df, buf);
+	free_filespec(df);
+	return 1;
+}
+
+/*
  * Given an origin, prepare mmfile_t structure to be used by the
  * diff machinery
  */
-static void fill_origin_blob(struct origin *o, mmfile_t *file)
+static void fill_origin_blob(struct diff_options *opt,
+			     struct origin *o, mmfile_t *file)
 {
 	if (!o->file.ptr) {
 		enum object_type type;
+		unsigned long file_size;
+
 		num_read_blob++;
-		file->ptr = read_sha1_file(o->blob_sha1, &type,
-					   (unsigned long *)(&(file->size)));
+		if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) &&
+		    textconv_object(o->path, o->blob_sha1, &file->ptr, &file_size))
+			;
+		else
+			file->ptr = read_sha1_file(o->blob_sha1, &type, &file_size);
+		file->size = file_size;
+
 		if (!file->ptr)
 			die("Cannot read blob %s for path %s",
 			    sha1_to_hex(o->blob_sha1),
@@ -282,7 +317,6 @@
 static int fill_blob_sha1(struct origin *origin)
 {
 	unsigned mode;
-
 	if (!is_null_sha1(origin->blob_sha1))
 		return 0;
 	if (get_tree_entry(origin->commit->object.sha1,
@@ -733,16 +767,17 @@
 {
 	int last_in_target;
 	mmfile_t file_p, file_o;
-	struct blame_chunk_cb_data d = { sb, target, parent, 0, 0 };
+	struct blame_chunk_cb_data d;
 	xpparam_t xpp;
 	xdemitconf_t xecfg;
-
+	memset(&d, 0, sizeof(d));
+	d.sb = sb; d.target = target; d.parent = parent;
 	last_in_target = find_last_in_target(sb, target);
 	if (last_in_target < 0)
 		return 1; /* nothing remains for this target */
 
-	fill_origin_blob(parent, &file_p);
-	fill_origin_blob(target, &file_o);
+	fill_origin_blob(&sb->revs->diffopt, parent, &file_p);
+	fill_origin_blob(&sb->revs->diffopt, target, &file_o);
 	num_get_patch++;
 
 	memset(&xpp, 0, sizeof(xpp));
@@ -875,10 +910,11 @@
 	const char *cp;
 	int cnt;
 	mmfile_t file_o;
-	struct handle_split_cb_data d = { sb, ent, parent, split, 0, 0 };
+	struct handle_split_cb_data d;
 	xpparam_t xpp;
 	xdemitconf_t xecfg;
-
+	memset(&d, 0, sizeof(d));
+	d.sb = sb; d.ent = ent; d.parent = parent; d.split = split;
 	/*
 	 * Prepare mmfile that contains only the lines in ent.
 	 */
@@ -922,7 +958,7 @@
 	if (last_in_target < 0)
 		return 1; /* nothing remains for this target */
 
-	fill_origin_blob(parent, &file_p);
+	fill_origin_blob(&sb->revs->diffopt, parent, &file_p);
 	if (!file_p.ptr)
 		return 0;
 
@@ -1063,7 +1099,7 @@
 
 			norigin = get_origin(sb, parent, p->one->path);
 			hashcpy(norigin->blob_sha1, p->one->sha1);
-			fill_origin_blob(norigin, &file_p);
+			fill_origin_blob(&sb->revs->diffopt, norigin, &file_p);
 			if (!file_p.ptr)
 				continue;
 
@@ -1983,6 +2019,16 @@
 		blame_date_mode = parse_date_format(value);
 		return 0;
 	}
+
+	switch (userdiff_config(var, value)) {
+	case 0:
+		break;
+	case -1:
+		return -1;
+	default:
+		return 0;
+	}
+
 	return git_default_config(var, value, cb);
 }
 
@@ -1990,7 +2036,9 @@
  * Prepare a dummy commit that represents the work tree (or staged) item.
  * Note that annotating work tree item never works in the reverse.
  */
-static struct commit *fake_working_tree_commit(const char *path, const char *contents_from)
+static struct commit *fake_working_tree_commit(struct diff_options *opt,
+					       const char *path,
+					       const char *contents_from)
 {
 	struct commit *commit;
 	struct origin *origin;
@@ -2018,6 +2066,7 @@
 	if (!contents_from || strcmp("-", contents_from)) {
 		struct stat st;
 		const char *read_from;
+		unsigned long buf_len;
 
 		if (contents_from) {
 			if (stat(contents_from, &st) < 0)
@@ -2030,9 +2079,13 @@
 			read_from = path;
 		}
 		mode = canon_mode(st.st_mode);
+
 		switch (st.st_mode & S_IFMT) {
 		case S_IFREG:
-			if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size)
+			if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) &&
+			    textconv_object(read_from, null_sha1, &buf.buf, &buf_len))
+				buf.len = buf_len;
+			else if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size)
 				die_errno("cannot open or read '%s'", read_from);
 			break;
 		case S_IFLNK:
@@ -2248,6 +2301,7 @@
 	git_config(git_blame_config, NULL);
 	init_revisions(&revs, NULL);
 	revs.date_mode = blame_date_mode;
+	DIFF_OPT_SET(&revs.diffopt, ALLOW_TEXTCONV);
 
 	save_commit_buffer = 0;
 	dashdash_pos = 0;
@@ -2384,7 +2438,8 @@
 		 * or "--contents".
 		 */
 		setup_work_tree();
-		sb.final = fake_working_tree_commit(path, contents_from);
+		sb.final = fake_working_tree_commit(&sb.revs->diffopt,
+						    path, contents_from);
 		add_pending_object(&revs, &(sb.final->object), ":");
 	}
 	else if (contents_from)
@@ -2411,8 +2466,14 @@
 		if (fill_blob_sha1(o))
 			die("no such path %s in %s", path, final_commit_name);
 
-		sb.final_buf = read_sha1_file(o->blob_sha1, &type,
-					      &sb.final_buf_size);
+		if (DIFF_OPT_TST(&sb.revs->diffopt, ALLOW_TEXTCONV) &&
+		    textconv_object(path, o->blob_sha1, (char **) &sb.final_buf,
+				    &sb.final_buf_size))
+			;
+		else
+			sb.final_buf = read_sha1_file(o->blob_sha1, &type,
+						      &sb.final_buf_size);
+
 		if (!sb.final_buf)
 			die("Cannot read blob %s for path %s",
 			    sha1_to_hex(o->blob_sha1),
diff --git a/builtin/branch.c b/builtin/branch.c
index 6cf7e72..87976f0 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -43,13 +43,13 @@
 	BRANCH_COLOR_PLAIN = 1,
 	BRANCH_COLOR_REMOTE = 2,
 	BRANCH_COLOR_LOCAL = 3,
-	BRANCH_COLOR_CURRENT = 4,
+	BRANCH_COLOR_CURRENT = 4
 };
 
 static enum merge_filter {
 	NO_FILTER = 0,
 	SHOW_NOT_MERGED,
-	SHOW_MERGED,
+	SHOW_MERGED
 } merge_filter;
 static unsigned char merge_filter_ref[20];
 
@@ -257,9 +257,15 @@
 	return xstrdup(dst);
 }
 
+struct append_ref_cb {
+	struct ref_list *ref_list;
+	int ret;
+};
+
 static int append_ref(const char *refname, const unsigned char *sha1, int flags, void *cb_data)
 {
-	struct ref_list *ref_list = (struct ref_list*)(cb_data);
+	struct append_ref_cb *cb = (struct append_ref_cb *)(cb_data);
+	struct ref_list *ref_list = cb->ref_list;
 	struct ref_item *newitem;
 	struct commit *commit;
 	int kind, i;
@@ -293,8 +299,10 @@
 	commit = NULL;
 	if (ref_list->verbose || ref_list->with_commit || merge_filter != NO_FILTER) {
 		commit = lookup_commit_reference_gently(sha1, 1);
-		if (!commit)
-			return error("branch '%s' does not point at a commit", refname);
+		if (!commit) {
+			cb->ret = error("branch '%s' does not point at a commit", refname);
+			return 0;
+		}
 
 		/* Filter with with_commit if specified */
 		if (!is_descendant_of(commit, ref_list->with_commit))
@@ -484,9 +492,10 @@
 	}
 }
 
-static void print_ref_list(int kinds, int detached, int verbose, int abbrev, struct commit_list *with_commit)
+static int print_ref_list(int kinds, int detached, int verbose, int abbrev, struct commit_list *with_commit)
 {
 	int i;
+	struct append_ref_cb cb;
 	struct ref_list ref_list;
 
 	memset(&ref_list, 0, sizeof(ref_list));
@@ -496,7 +505,9 @@
 	ref_list.with_commit = with_commit;
 	if (merge_filter != NO_FILTER)
 		init_revisions(&ref_list.revs, NULL);
-	for_each_rawref(append_ref, &ref_list);
+	cb.ref_list = &ref_list;
+	cb.ret = 0;
+	for_each_rawref(append_ref, &cb);
 	if (merge_filter != NO_FILTER) {
 		struct commit *filter;
 		filter = lookup_commit_reference_gently(merge_filter_ref, 0);
@@ -527,6 +538,11 @@
 	}
 
 	free_ref_list(&ref_list);
+
+	if (cb.ret)
+		error("some refs could not be read");
+
+	return cb.ret;
 }
 
 static void rename_branch(const char *oldname, const char *newname, int force)
@@ -679,7 +695,7 @@
 	if (delete)
 		return delete_branches(argc, argv, delete > 1, kinds);
 	else if (argc == 0)
-		print_ref_list(kinds, detached, verbose, abbrev, with_commit);
+		return print_ref_list(kinds, detached, verbose, abbrev, with_commit);
 	else if (rename && (argc == 1))
 		rename_branch(head, argv[0], rename > 1);
 	else if (rename && (argc == 2))
diff --git a/builtin/cat-file.c b/builtin/cat-file.c
index a933eaa..76ec3fe 100644
--- a/builtin/cat-file.c
+++ b/builtin/cat-file.c
@@ -9,6 +9,8 @@
 #include "tree.h"
 #include "builtin.h"
 #include "parse-options.h"
+#include "diff.h"
+#include "userdiff.h"
 
 #define BATCH 1
 #define BATCH_CHECK 2
@@ -84,10 +86,11 @@
 {
 	unsigned char sha1[20];
 	enum object_type type;
-	void *buf;
+	char *buf;
 	unsigned long size;
+	struct object_context obj_context;
 
-	if (get_sha1(obj_name, sha1))
+	if (get_sha1_with_context(obj_name, sha1, &obj_context))
 		die("Not a valid object name %s", obj_name);
 
 	buf = NULL;
@@ -118,7 +121,9 @@
 
 		/* custom pretty-print here */
 		if (type == OBJ_TREE) {
-			const char *ls_args[3] = {"ls-tree", obj_name, NULL};
+			const char *ls_args[3] = { NULL };
+			ls_args[0] =  "ls-tree";
+			ls_args[1] =  obj_name;
 			return cmd_ls_tree(2, ls_args, NULL);
 		}
 
@@ -132,6 +137,17 @@
 
 		/* otherwise just spit out the data */
 		break;
+
+	case 'c':
+		if (!obj_context.path[0])
+			die("git cat-file --textconv %s: <object> must be <sha1:path>",
+			    obj_name);
+
+		if (!textconv_object(obj_context.path, sha1, &buf, &size))
+			die("git cat-file --textconv: unable to run textconv on %s",
+			    obj_name);
+		break;
+
 	case 0:
 		buf = read_object_with_reference(sha1, exp_type, &size, NULL);
 		break;
@@ -201,11 +217,25 @@
 }
 
 static const char * const cat_file_usage[] = {
-	"git cat-file (-t|-s|-e|-p|<type>) <object>",
+	"git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>",
 	"git cat-file (--batch|--batch-check) < <list_of_objects>",
 	NULL
 };
 
+static int git_cat_file_config(const char *var, const char *value, void *cb)
+{
+	switch (userdiff_config(var, value)) {
+	case 0:
+		break;
+	case -1:
+		return -1;
+	default:
+		return 0;
+	}
+
+	return git_default_config(var, value, cb);
+}
+
 int cmd_cat_file(int argc, const char **argv, const char *prefix)
 {
 	int opt = 0, batch = 0;
@@ -218,6 +248,8 @@
 		OPT_SET_INT('e', NULL, &opt,
 			    "exit with zero when there's no error", 'e'),
 		OPT_SET_INT('p', NULL, &opt, "pretty-print object's content", 'p'),
+		OPT_SET_INT(0, "textconv", &opt,
+			    "for blob objects, run textconv on object's content", 'c'),
 		OPT_SET_INT(0, "batch", &batch,
 			    "show info and content of objects fed from the standard input",
 			    BATCH),
@@ -227,7 +259,7 @@
 		OPT_END()
 	};
 
-	git_config(git_default_config, NULL);
+	git_config(git_cat_file_config, NULL);
 
 	if (argc != 3 && argc != 2)
 		usage_with_options(cat_file_usage, options);
diff --git a/builtin/checkout.c b/builtin/checkout.c
index c382521..1994be9 100644
--- a/builtin/checkout.c
+++ b/builtin/checkout.c
@@ -493,7 +493,24 @@
 	struct strbuf msg = STRBUF_INIT;
 	const char *old_desc;
 	if (opts->new_branch) {
-		if (!opts->new_orphan_branch)
+		if (opts->new_orphan_branch) {
+			if (opts->new_branch_log && !log_all_ref_updates) {
+				int temp;
+				char log_file[PATH_MAX];
+				char *ref_name = mkpath("refs/heads/%s", opts->new_orphan_branch);
+
+				temp = log_all_ref_updates;
+				log_all_ref_updates = 1;
+				if (log_ref_setup(ref_name, log_file, sizeof(log_file))) {
+					fprintf(stderr, "Can not do reflog for '%s'\n",
+					    opts->new_orphan_branch);
+					log_all_ref_updates = temp;
+					return;
+				}
+				log_all_ref_updates = temp;
+			}
+		}
+		else
 			create_branch(old->name, opts->new_branch, new->name, 0,
 				      opts->new_branch_log, opts->track);
 		new->name = opts->new_branch;
@@ -517,6 +534,14 @@
 					opts->new_branch ? " a new" : "",
 					new->name);
 		}
+		if (old->path && old->name) {
+			char log_file[PATH_MAX], ref_file[PATH_MAX];
+
+			git_snpath(log_file, sizeof(log_file), "logs/%s", old->path);
+			git_snpath(ref_file, sizeof(ref_file), "%s", old->path);
+			if (!file_exists(ref_file) && file_exists(log_file))
+				remove_path(log_file);
+		}
 	} else if (strcmp(new->name, "HEAD")) {
 		update_ref(msg.buf, "HEAD", new->commit->object.sha1, NULL,
 			   REF_NODEREF, DIE_ON_ERR);
@@ -611,7 +636,8 @@
 
 static const char *unique_tracking_name(const char *name)
 {
-	struct tracking_name_data cb_data = { name, NULL, 1 };
+	struct tracking_name_data cb_data = { NULL, NULL, 1 };
+	cb_data.name = name;
 	for_each_ref(check_tracking_name, &cb_data);
 	if (cb_data.unique)
 		return cb_data.remote;
@@ -684,8 +710,8 @@
 	if (opts.new_orphan_branch) {
 		if (opts.new_branch)
 			die("--orphan and -b are mutually exclusive");
-		if (opts.track > 0 || opts.new_branch_log)
-			die("--orphan cannot be used with -t or -l");
+		if (opts.track > 0)
+			die("--orphan cannot be used with -t");
 		opts.new_branch = opts.new_orphan_branch;
 	}
 
diff --git a/builtin/commit.c b/builtin/commit.c
index a861686..c101f00 100644
--- a/builtin/commit.c
+++ b/builtin/commit.c
@@ -48,6 +48,11 @@
 "\n"
 "    git commit --amend --author='Your Name <you@example.com>'\n";
 
+static const char empty_amend_advice[] =
+"You asked to amend the most recent commit, but doing so would make\n"
+"it empty. You can repeat your command with --allow-empty, or you can\n"
+"remove the commit entirely with \"git reset HEAD^\".\n";
+
 static unsigned char head_sha1[20];
 
 static char *use_message_buffer;
@@ -57,7 +62,7 @@
 static enum {
 	COMMIT_AS_IS = 1,
 	COMMIT_NORMAL,
-	COMMIT_PARTIAL,
+	COMMIT_PARTIAL
 } commit_style;
 
 static const char *logfile, *force_author;
@@ -67,7 +72,7 @@
 static int all, edit_flag, also, interactive, only, amend, signoff;
 static int quiet, verbose, no_verify, allow_empty, dry_run, renew_authorship;
 static int no_post_rewrite, allow_empty_message;
-static char *untracked_files_arg, *force_date;
+static char *untracked_files_arg, *force_date, *ignore_submodule_arg;
 /*
  * The default commit message cleanup mode will remove the lines
  * beginning with # (shell comments) and leading and trailing
@@ -78,7 +83,7 @@
 static enum {
 	CLEANUP_SPACE,
 	CLEANUP_NONE,
-	CLEANUP_ALL,
+	CLEANUP_ALL
 } cleanup_mode;
 static char *cleanup_arg;
 
@@ -91,7 +96,7 @@
 static enum {
 	STATUS_FORMAT_LONG,
 	STATUS_FORMAT_SHORT,
-	STATUS_FORMAT_PORCELAIN,
+	STATUS_FORMAT_PORCELAIN
 } status_format = STATUS_FORMAT_LONG;
 static int status_show_branch;
 
@@ -214,7 +219,7 @@
 			continue;
 		if (!match_pathspec(pattern, ce->name, ce_namelen(ce), 0, m))
 			continue;
-		item = string_list_insert(ce->name, list);
+		item = string_list_insert(list, ce->name);
 		if (ce_skip_worktree(ce))
 			item->util = item; /* better a valid pointer than a fake one */
 	}
@@ -708,6 +713,8 @@
 	if (!commitable && !in_merge && !allow_empty &&
 	    !(amend && is_a_merge(head_sha1))) {
 		run_status(stdout, index_file, prefix, 0, s);
+		if (amend)
+			fputs(empty_amend_advice, stderr);
 		return 0;
 	}
 
@@ -732,7 +739,8 @@
 
 	if (use_editor) {
 		char index[PATH_MAX];
-		const char *env[2] = { index, NULL };
+		const char *env[2] = { NULL };
+		env[0] =  index;
 		snprintf(index, sizeof(index), "GIT_INDEX_FILE=%s", index_file);
 		if (launch_editor(git_path(commit_editmsg), NULL, env)) {
 			fprintf(stderr,
@@ -1051,6 +1059,9 @@
 		  PARSE_OPT_OPTARG, NULL, (intptr_t)"all" },
 		OPT_BOOLEAN(0, "ignored", &show_ignored_in_status,
 			    "show ignored files"),
+		{ OPTION_STRING, 0, "ignore-submodules", &ignore_submodule_arg, "when",
+		  "ignore changes to submodules, optional when: all, dirty, untracked. (Default: all)",
+		  PARSE_OPT_OPTARG, NULL, (intptr_t)"all" },
 		OPT_END(),
 	};
 
@@ -1081,6 +1092,7 @@
 
 	s.is_initial = get_sha1(s.reference, sha1) ? 1 : 0;
 	s.in_merge = in_merge;
+	s.ignore_submodule_arg = ignore_submodule_arg;
 	wt_status_collect(&s);
 
 	if (s.relative_paths)
@@ -1099,6 +1111,7 @@
 		break;
 	case STATUS_FORMAT_LONG:
 		s.verbose = verbose;
+		s.ignore_submodule_arg = ignore_submodule_arg;
 		wt_status_print(&s);
 		break;
 	}
@@ -1167,13 +1180,11 @@
 		initial_commit ? " (root-commit)" : "");
 
 	if (!log_tree_commit(&rev, commit)) {
-		struct pretty_print_context ctx = {0};
-		struct strbuf buf = STRBUF_INIT;
-		ctx.date_mode = DATE_NORMAL;
-		format_commit_message(commit, format.buf + 7, &buf, &ctx);
-		printf("%s\n", buf.buf);
-		strbuf_release(&buf);
+		rev.always_show_header = 1;
+		rev.use_terminator = 1;
+		log_tree_commit(&rev, commit);
 	}
+
 	strbuf_release(&format);
 }
 
@@ -1261,13 +1272,16 @@
 	}
 
 	/* Determine parents */
+	reflog_msg = getenv("GIT_REFLOG_ACTION");
 	if (initial_commit) {
-		reflog_msg = "commit (initial)";
+		if (!reflog_msg)
+			reflog_msg = "commit (initial)";
 	} else if (amend) {
 		struct commit_list *c;
 		struct commit *commit;
 
-		reflog_msg = "commit (amend)";
+		if (!reflog_msg)
+			reflog_msg = "commit (amend)";
 		commit = lookup_commit(head_sha1);
 		if (!commit || parse_commit(commit))
 			die("could not parse HEAD commit");
@@ -1278,7 +1292,8 @@
 		struct strbuf m = STRBUF_INIT;
 		FILE *fp;
 
-		reflog_msg = "commit (merge)";
+		if (!reflog_msg)
+			reflog_msg = "commit (merge)";
 		pptr = &commit_list_insert(lookup_commit(head_sha1), pptr)->next;
 		fp = fopen(git_path("MERGE_HEAD"), "r");
 		if (fp == NULL)
@@ -1301,7 +1316,8 @@
 		if (allow_fast_forward)
 			parents = reduce_heads(parents);
 	} else {
-		reflog_msg = "commit";
+		if (!reflog_msg)
+			reflog_msg = "commit";
 		pptr = &commit_list_insert(lookup_commit(head_sha1), pptr)->next;
 	}
 
diff --git a/builtin/fast-export.c b/builtin/fast-export.c
index c6dd71a..9fe25ff 100644
--- a/builtin/fast-export.c
+++ b/builtin/fast-export.c
@@ -438,7 +438,7 @@
 			/* handle nested tags */
 			while (tag && tag->object.type == OBJ_TAG) {
 				parse_object(tag->object.sha1);
-				string_list_append(full_name, extra_refs)->util = tag;
+				string_list_append(extra_refs, full_name)->util = tag;
 				tag = (struct tag *)tag->tagged;
 			}
 			if (!tag)
@@ -464,7 +464,7 @@
 		}
 		if (commit->util)
 			/* more than one name for the same object */
-			string_list_append(full_name, extra_refs)->util = commit;
+			string_list_append(extra_refs, full_name)->util = commit;
 		else
 			commit->util = full_name;
 	}
diff --git a/builtin/fetch.c b/builtin/fetch.c
index 8470850..6eb1dfe 100644
--- a/builtin/fetch.c
+++ b/builtin/fetch.c
@@ -528,7 +528,7 @@
 			int flag, void *cbdata)
 {
 	struct string_list *list = (struct string_list *)cbdata;
-	struct string_list_item *item = string_list_insert(refname, list);
+	struct string_list_item *item = string_list_insert(list, refname);
 	item->util = (void *)sha1;
 	return 0;
 }
@@ -574,9 +574,10 @@
 {
 	struct string_list existing_refs = { NULL, 0, 0, 0 };
 	struct string_list remote_refs = { NULL, 0, 0, 0 };
-	struct tag_data data = {head, tail};
+	struct tag_data data;
 	const struct ref *ref;
 	struct string_list_item *item = NULL;
+	data.head = head; data.tail = tail;
 
 	for_each_ref(add_existing, &existing_refs);
 	for (ref = transport_get_remote_refs(transport); ref; ref = ref->next) {
@@ -616,7 +617,7 @@
 		    string_list_has_string(&existing_refs, ref->name))
 			continue;
 
-		item = string_list_insert(ref->name, &remote_refs);
+		item = string_list_insert(&remote_refs, ref->name);
 		item->util = (void *)ref->old_sha1;
 	}
 	string_list_clear(&existing_refs, 0);
@@ -633,7 +634,7 @@
 	 * For all the tags in the remote_refs string list, call
 	 * add_to_tail to add them to the list of refs to be fetched
 	 */
-	for_each_string_list(add_to_tail, &remote_refs, &data);
+	for_each_string_list(&remote_refs, add_to_tail, &data);
 
 	string_list_clear(&remote_refs, 0);
 }
@@ -695,8 +696,8 @@
 
 	for (rm = ref_map; rm; rm = rm->next) {
 		if (rm->peer_ref) {
-			peer_item = string_list_lookup(rm->peer_ref->name,
-						       &existing_refs);
+			peer_item = string_list_lookup(&existing_refs,
+						       rm->peer_ref->name);
 			if (peer_item)
 				hashcpy(rm->peer_ref->old_sha1,
 					peer_item->util);
@@ -745,7 +746,7 @@
 {
 	struct string_list *list = priv;
 	if (!remote->skip_default_update)
-		string_list_append(remote->name, list);
+		string_list_append(list, remote->name);
 	return 0;
 }
 
@@ -764,8 +765,8 @@
 		int space = strcspn(value, " \t\n");
 		while (*value) {
 			if (space > 1) {
-				string_list_append(xstrndup(value, space),
-						   g->list);
+				string_list_append(g->list,
+						   xstrndup(value, space));
 			}
 			value += space + (value[space] != '\0');
 			space = strcspn(value, " \t\n");
@@ -778,7 +779,8 @@
 static int add_remote_or_group(const char *name, struct string_list *list)
 {
 	int prev_nr = list->nr;
-	struct remote_group_data g = { name, list };
+	struct remote_group_data g;
+	g.name = name; g.list = list;
 
 	git_config(get_remote_group, &g);
 	if (list->nr == prev_nr) {
@@ -786,7 +788,7 @@
 		if (!remote_is_configured(name))
 			return 0;
 		remote = remote_get(name);
-		string_list_append(remote->name, list);
+		string_list_append(list, remote->name);
 	}
 	return 1;
 }
diff --git a/builtin/fmt-merge-msg.c b/builtin/fmt-merge-msg.c
index 4420425..bc3c5e6 100644
--- a/builtin/fmt-merge-msg.c
+++ b/builtin/fmt-merge-msg.c
@@ -82,7 +82,7 @@
 
 	item = unsorted_string_list_lookup(&srcs, src);
 	if (!item) {
-		item = string_list_append(src, &srcs);
+		item = string_list_append(&srcs, src);
 		item->util = xcalloc(1, sizeof(struct src_data));
 		init_src_data(item->util);
 	}
@@ -93,19 +93,19 @@
 		src_data->head_status |= 1;
 	} else if (!prefixcmp(line, "branch ")) {
 		origin = line + 7;
-		string_list_append(origin, &src_data->branch);
+		string_list_append(&src_data->branch, origin);
 		src_data->head_status |= 2;
 	} else if (!prefixcmp(line, "tag ")) {
 		origin = line;
-		string_list_append(origin + 4, &src_data->tag);
+		string_list_append(&src_data->tag, origin + 4);
 		src_data->head_status |= 2;
 	} else if (!prefixcmp(line, "remote branch ")) {
 		origin = line + 14;
-		string_list_append(origin, &src_data->r_branch);
+		string_list_append(&src_data->r_branch, origin);
 		src_data->head_status |= 2;
 	} else {
 		origin = src;
-		string_list_append(line, &src_data->generic);
+		string_list_append(&src_data->generic, line);
 		src_data->head_status |= 2;
 	}
 
@@ -118,7 +118,7 @@
 		sprintf(new_origin, "%s of %s", origin, src);
 		origin = new_origin;
 	}
-	string_list_append(origin, &origins)->util = sha1;
+	string_list_append(&origins, origin)->util = sha1;
 	return 0;
 }
 
@@ -176,10 +176,10 @@
 		strbuf_ltrim(&sb);
 
 		if (!sb.len)
-			string_list_append(sha1_to_hex(commit->object.sha1),
-					   &subjects);
+			string_list_append(&subjects,
+					   sha1_to_hex(commit->object.sha1));
 		else
-			string_list_append(strbuf_detach(&sb, NULL), &subjects);
+			string_list_append(&subjects, strbuf_detach(&sb, NULL));
 	}
 
 	if (count > limit)
diff --git a/builtin/grep.c b/builtin/grep.c
index d0a73da..232cd1c 100644
--- a/builtin/grep.c
+++ b/builtin/grep.c
@@ -11,6 +11,8 @@
 #include "tree-walk.h"
 #include "builtin.h"
 #include "parse-options.h"
+#include "string-list.h"
+#include "run-command.h"
 #include "userdiff.h"
 #include "grep.h"
 #include "quote.h"
@@ -556,6 +558,33 @@
 	}
 }
 
+static void append_path(struct grep_opt *opt, const void *data, size_t len)
+{
+	struct string_list *path_list = opt->output_priv;
+
+	if (len == 1 && *(const char *)data == '\0')
+		return;
+	string_list_append(path_list, xstrndup(data, len));
+}
+
+static void run_pager(struct grep_opt *opt, const char *prefix)
+{
+	struct string_list *path_list = opt->output_priv;
+	const char **argv = xmalloc(sizeof(const char *) * (path_list->nr + 1));
+	int i, status;
+
+	for (i = 0; i < path_list->nr; i++)
+		argv[i] = path_list->items[i].string;
+	argv[path_list->nr] = NULL;
+
+	if (prefix && chdir(prefix))
+		die("Failed to chdir: %s", prefix);
+	status = run_command_v_opt(argv, RUN_USING_SHELL);
+	if (status)
+		exit(status);
+	free(argv);
+}
+
 static int grep_cache(struct grep_opt *opt, const char **paths, int cached)
 {
 	int hit = 0;
@@ -590,7 +619,6 @@
 		if (hit && opt->status_only)
 			break;
 	}
-	free_grep_patterns(opt);
 	return hit;
 }
 
@@ -675,6 +703,25 @@
 	die("unable to grep from object of type %s", typename(obj->type));
 }
 
+static int grep_objects(struct grep_opt *opt, const char **paths,
+			const struct object_array *list)
+{
+	unsigned int i;
+	int hit = 0;
+	const unsigned int nr = list->nr;
+
+	for (i = 0; i < nr; i++) {
+		struct object *real_obj;
+		real_obj = deref_tag(list->objects[i].item, NULL, 0);
+		if (grep_object(opt, paths, real_obj, list->objects[i].name)) {
+			hit = 1;
+			if (opt->status_only)
+				break;
+		}
+	}
+	return hit;
+}
+
 static int grep_directory(struct grep_opt *opt, const char **paths)
 {
 	struct dir_struct dir;
@@ -689,7 +736,6 @@
 		if (hit && opt->status_only)
 			break;
 	}
-	free_grep_patterns(opt);
 	return hit;
 }
 
@@ -786,9 +832,11 @@
 	int cached = 0;
 	int seen_dashdash = 0;
 	int external_grep_allowed__ignored;
+	const char *show_in_pager = NULL, *default_pager = "dummy";
 	struct grep_opt opt;
 	struct object_array list = { 0, 0, NULL };
 	const char **paths = NULL;
+	struct string_list path_list = { NULL, 0, 0, 0 };
 	int i;
 	int dummy;
 	int nongit = 0, use_index = 1;
@@ -872,6 +920,9 @@
 		OPT_BOOLEAN(0, "all-match", &opt.all_match,
 			"show only matches from files that match all patterns"),
 		OPT_GROUP(""),
+		{ OPTION_STRING, 'O', "open-files-in-pager", &show_in_pager,
+			"pager", "show matching files in the pager",
+			PARSE_OPT_OPTARG, NULL, (intptr_t)default_pager },
 		OPT_BOOLEAN(0, "ext-grep", &external_grep_allowed__ignored,
 			    "allow calling of grep(1) (ignored by this build)"),
 		{ OPTION_CALLBACK, 0, "help-all", &options, NULL, "show usage",
@@ -947,6 +998,17 @@
 		argc--;
 	}
 
+	if (show_in_pager == default_pager)
+		show_in_pager = git_pager(1);
+	if (show_in_pager) {
+		opt.name_only = 1;
+		opt.null_following_name = 1;
+		opt.output_priv = &path_list;
+		opt.output = append_path;
+		string_list_append(&path_list, show_in_pager);
+		use_threads = 0;
+	}
+
 	if (!opt.pattern_list)
 		die("no pattern given.");
 	if (!opt.fixed && opt.ignore_case)
@@ -1003,44 +1065,51 @@
 		paths[1] = NULL;
 	}
 
+	if (show_in_pager && (cached || list.nr))
+		die("--open-files-in-pager only works on the worktree");
+
+	if (show_in_pager && opt.pattern_list && !opt.pattern_list->next) {
+		const char *pager = path_list.items[0].string;
+		int len = strlen(pager);
+
+		if (len > 4 && is_dir_sep(pager[len - 5]))
+			pager += len - 4;
+
+		if (!strcmp("less", pager) || !strcmp("vi", pager)) {
+			struct strbuf buf = STRBUF_INIT;
+			strbuf_addf(&buf, "+/%s%s",
+					strcmp("less", pager) ? "" : "*",
+					opt.pattern_list->pattern);
+			string_list_append(&path_list, buf.buf);
+			strbuf_detach(&buf, NULL);
+		}
+	}
+
+	if (!show_in_pager)
+		setup_pager();
+
+
 	if (!use_index) {
-		int hit;
 		if (cached)
 			die("--cached cannot be used with --no-index.");
 		if (list.nr)
 			die("--no-index cannot be used with revs.");
 		hit = grep_directory(&opt, paths);
-		if (use_threads)
-			hit |= wait_all();
-		return !hit;
-	}
-
-	if (!list.nr) {
-		int hit;
+	} else if (!list.nr) {
 		if (!cached)
 			setup_work_tree();
 
 		hit = grep_cache(&opt, paths, cached);
-		if (use_threads)
-			hit |= wait_all();
-		return !hit;
-	}
-
-	if (cached)
-		die("both --cached and trees are given.");
-
-	for (i = 0; i < list.nr; i++) {
-		struct object *real_obj;
-		real_obj = deref_tag(list.objects[i].item, NULL, 0);
-		if (grep_object(&opt, paths, real_obj, list.objects[i].name)) {
-			hit = 1;
-			if (opt.status_only)
-				break;
-		}
+	} else {
+		if (cached)
+			die("both --cached and trees are given.");
+		hit = grep_objects(&opt, paths, &list);
 	}
 
 	if (use_threads)
 		hit |= wait_all();
+	if (hit && show_in_pager)
+		run_pager(&opt, prefix);
 	free_grep_patterns(&opt);
 	return !hit;
 }
diff --git a/builtin/help.c b/builtin/help.c
index 3182a2b..a9836b00 100644
--- a/builtin/help.c
+++ b/builtin/help.c
@@ -26,7 +26,7 @@
 	HELP_FORMAT_NONE,
 	HELP_FORMAT_MAN,
 	HELP_FORMAT_INFO,
-	HELP_FORMAT_WEB,
+	HELP_FORMAT_WEB
 };
 
 static int show_all = 0;
diff --git a/builtin/log.c b/builtin/log.c
index 0835866..08b8722 100644
--- a/builtin/log.c
+++ b/builtin/log.c
@@ -538,13 +538,13 @@
 		len--;
 
 	if (!strncasecmp(value, "to: ", 4)) {
-		item = string_list_append(value + 4, &extra_to);
+		item = string_list_append(&extra_to, value + 4);
 		len -= 4;
 	} else if (!strncasecmp(value, "cc: ", 4)) {
-		item = string_list_append(value + 4, &extra_cc);
+		item = string_list_append(&extra_cc, value + 4);
 		len -= 4;
 	} else {
-		item = string_list_append(value, &extra_hdr);
+		item = string_list_append(&extra_hdr, value);
 	}
 
 	item->string[len] = '\0';
@@ -552,8 +552,9 @@
 
 #define THREAD_SHALLOW 1
 #define THREAD_DEEP 2
-static int thread = 0;
-static int do_signoff = 0;
+static int thread;
+static int do_signoff;
+static const char *signature = git_version_string;
 
 static int git_format_config(const char *var, const char *value, void *cb)
 {
@@ -568,13 +569,13 @@
 	if (!strcmp(var, "format.to")) {
 		if (!value)
 			return config_error_nonbool(var);
-		string_list_append(value, &extra_to);
+		string_list_append(&extra_to, value);
 		return 0;
 	}
 	if (!strcmp(var, "format.cc")) {
 		if (!value)
 			return config_error_nonbool(var);
-		string_list_append(value, &extra_cc);
+		string_list_append(&extra_cc, value);
 		return 0;
 	}
 	if (!strcmp(var, "diff.color") || !strcmp(var, "color.diff")) {
@@ -612,6 +613,8 @@
 		do_signoff = git_config_bool(var, value);
 		return 0;
 	}
+	if (!strcmp(var, "format.signature"))
+		return git_config_string(&signature, var, value);
 
 	return git_log_config(var, value, cb);
 }
@@ -706,6 +709,12 @@
 	info->message_id = strbuf_detach(&buf, NULL);
 }
 
+static void print_signature(void)
+{
+	if (signature && *signature)
+		printf("-- \n%s\n\n", signature);
+}
+
 static void make_cover_letter(struct rev_info *rev, int use_stdout,
 			      int numbered, int numbered_files,
 			      struct commit *origin,
@@ -799,6 +808,7 @@
 	diff_flush(&opts);
 
 	printf("\n");
+	print_signature();
 }
 
 static const char *clean_message_id(const char *msg_id)
@@ -952,7 +962,7 @@
 	if (unset)
 		string_list_clear(&extra_to, 0);
 	else
-		string_list_append(arg, &extra_to);
+		string_list_append(&extra_to, arg);
 	return 0;
 }
 
@@ -961,7 +971,7 @@
 	if (unset)
 		string_list_clear(&extra_cc, 0);
 	else
-		string_list_append(arg, &extra_cc);
+		string_list_append(&extra_cc, arg);
 	return 0;
 }
 
@@ -1038,6 +1048,8 @@
 		{ OPTION_CALLBACK, 0, "thread", &thread, "style",
 			    "enable message threading, styles: shallow, deep",
 			    PARSE_OPT_OPTARG, thread_callback },
+		OPT_STRING(0, "signature", &signature, "signature",
+			    "add a signature"),
 		OPT_END()
 	};
 
@@ -1242,7 +1254,7 @@
 		rev.ref_message_ids = xcalloc(1, sizeof(struct string_list));
 	if (in_reply_to) {
 		const char *msgid = clean_message_id(in_reply_to);
-		string_list_append(msgid, rev.ref_message_ids);
+		string_list_append(rev.ref_message_ids, msgid);
 	}
 	rev.numbered_files = numbered_files;
 	rev.patch_suffix = fmt_patch_suffix;
@@ -1289,8 +1301,8 @@
 				    && (!cover_letter || rev.nr > 1))
 					free(rev.message_id);
 				else
-					string_list_append(rev.message_id,
-							   rev.ref_message_ids);
+					string_list_append(rev.ref_message_ids,
+							   rev.message_id);
 			}
 			gen_message_id(&rev, sha1_to_hex(commit->object.sha1));
 		}
@@ -1316,7 +1328,7 @@
 				       mime_boundary_leader,
 				       rev.mime_boundary);
 			else
-				printf("-- \n%s\n\n", git_version_string);
+				print_signature();
 		}
 		if (!use_stdout)
 			fclose(stdout);
diff --git a/builtin/ls-files.c b/builtin/ls-files.c
index 0804047..1b9b8a8 100644
--- a/builtin/ls-files.c
+++ b/builtin/ls-files.c
@@ -190,7 +190,7 @@
 {
 	if (!the_index.resolve_undo)
 		return;
-	for_each_string_list(show_one_ru, the_index.resolve_undo, NULL);
+	for_each_string_list(the_index.resolve_undo, show_one_ru, NULL);
 }
 
 static void show_files(struct dir_struct *dir)
diff --git a/builtin/mailinfo.c b/builtin/mailinfo.c
index 4a9729b..2320d98 100644
--- a/builtin/mailinfo.c
+++ b/builtin/mailinfo.c
@@ -17,10 +17,10 @@
 static struct strbuf email = STRBUF_INIT;
 
 static enum  {
-	TE_DONTCARE, TE_QP, TE_BASE64,
+	TE_DONTCARE, TE_QP, TE_BASE64
 } transfer_encoding;
 static enum  {
-	TYPE_TEXT, TYPE_OTHER,
+	TYPE_TEXT, TYPE_OTHER
 } message_type;
 
 static struct strbuf charset = STRBUF_INIT;
diff --git a/builtin/mailsplit.c b/builtin/mailsplit.c
index cdfc1b7..e4560da 100644
--- a/builtin/mailsplit.c
+++ b/builtin/mailsplit.c
@@ -121,7 +121,7 @@
 			if (dent->d_name[0] == '.')
 				continue;
 			snprintf(name, sizeof(name), "%s/%s", *sub, dent->d_name);
-			string_list_insert(name, list);
+			string_list_insert(list, name);
 		}
 
 		closedir(dir);
diff --git a/builtin/mv.c b/builtin/mv.c
index c07f53b..38574b8 100644
--- a/builtin/mv.c
+++ b/builtin/mv.c
@@ -180,7 +180,7 @@
 		} else if (string_list_has_string(&src_for_dst, dst))
 			bad = "multiple sources for the same target";
 		else
-			string_list_insert(dst, &src_for_dst);
+			string_list_insert(&src_for_dst, dst);
 
 		if (bad) {
 			if (ignore_errors) {
diff --git a/builtin/notes.c b/builtin/notes.c
index 648033c..190005f 100644
--- a/builtin/notes.c
+++ b/builtin/notes.c
@@ -313,7 +313,7 @@
 	return 0;
 }
 
-combine_notes_fn *parse_combine_notes_fn(const char *v)
+combine_notes_fn parse_combine_notes_fn(const char *v)
 {
 	if (!strcasecmp(v, "overwrite"))
 		return combine_notes_overwrite;
@@ -614,6 +614,10 @@
 		}
 	}
 
+	if (argc < 2) {
+		error("too few parameters");
+		usage_with_options(git_notes_copy_usage, options);
+	}
 	if (2 < argc) {
 		error("too many parameters");
 		usage_with_options(git_notes_copy_usage, options);
diff --git a/builtin/receive-pack.c b/builtin/receive-pack.c
index bb34757..d634b5a 100644
--- a/builtin/receive-pack.c
+++ b/builtin/receive-pack.c
@@ -17,7 +17,7 @@
 	DENY_UNCONFIGURED,
 	DENY_IGNORE,
 	DENY_WARN,
-	DENY_REFUSE,
+	DENY_REFUSE
 };
 
 static int deny_deletes;
@@ -501,7 +501,7 @@
 	if (!(flag & REF_ISSYMREF))
 		return;
 
-	if ((item = string_list_lookup(dst_name, list)) == NULL)
+	if ((item = string_list_lookup(list, dst_name)) == NULL)
 		return;
 
 	cmd->skip_update = 1;
@@ -515,9 +515,9 @@
 	dst_cmd->skip_update = 1;
 
 	strcpy(cmd_oldh, find_unique_abbrev(cmd->old_sha1, DEFAULT_ABBREV));
-	strcat(cmd_newh, find_unique_abbrev(cmd->new_sha1, DEFAULT_ABBREV));
+	strcpy(cmd_newh, find_unique_abbrev(cmd->new_sha1, DEFAULT_ABBREV));
 	strcpy(dst_oldh, find_unique_abbrev(dst_cmd->old_sha1, DEFAULT_ABBREV));
-	strcat(dst_newh, find_unique_abbrev(dst_cmd->new_sha1, DEFAULT_ABBREV));
+	strcpy(dst_newh, find_unique_abbrev(dst_cmd->new_sha1, DEFAULT_ABBREV));
 	rp_error("refusing inconsistent update between symref '%s' (%s..%s) and"
 		 " its target '%s' (%s..%s)",
 		 cmd->ref_name, cmd_oldh, cmd_newh,
@@ -534,7 +534,7 @@
 
 	for (cmd = commands; cmd; cmd = cmd->next) {
 		struct string_list_item *item =
-			string_list_append(cmd->ref_name, &ref_list);
+			string_list_append(&ref_list, cmd->ref_name);
 		item->util = (void *)cmd;
 	}
 	sort_string_list(&ref_list);
diff --git a/builtin/remote.c b/builtin/remote.c
index 4745957..6699bc5 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -94,7 +94,7 @@
 	if (not)
 		string_list_clear(list, 0);
 	else
-		string_list_append(arg, list);
+		string_list_append(list, arg);
 	return 0;
 }
 
@@ -181,7 +181,7 @@
 	strbuf_addf(&buf, "remote.%s.fetch", name);
 
 	if (track.nr == 0)
-		string_list_append("*", &track);
+		string_list_append(&track, "*");
 	for (i = 0; i < track.nr; i++) {
 		if (add_branch(buf.buf, track.items[i].string,
 				name, mirror, &buf2))
@@ -263,7 +263,7 @@
 		} else
 			return 0;
 
-		item = string_list_insert(name, &branch_list);
+		item = string_list_insert(&branch_list, name);
 
 		if (!item->util)
 			item->util = xcalloc(sizeof(struct branch_info), 1);
@@ -278,11 +278,11 @@
 			while (space) {
 				char *merge;
 				merge = xstrndup(value, space - value);
-				string_list_append(merge, &info->merge);
+				string_list_append(&info->merge, merge);
 				value = abbrev_branch(space + 1);
 				space = strchr(value, ' ');
 			}
-			string_list_append(xstrdup(value), &info->merge);
+			string_list_append(&info->merge, xstrdup(value));
 		} else
 			info->rebase = git_config_bool(orig_key, value);
 	}
@@ -319,14 +319,14 @@
 	for (ref = fetch_map; ref; ref = ref->next) {
 		unsigned char sha1[20];
 		if (!ref->peer_ref || read_ref(ref->peer_ref->name, sha1))
-			string_list_append(abbrev_branch(ref->name), &states->new);
+			string_list_append(&states->new, abbrev_branch(ref->name));
 		else
-			string_list_append(abbrev_branch(ref->name), &states->tracked);
+			string_list_append(&states->tracked, abbrev_branch(ref->name));
 	}
 	stale_refs = get_stale_heads(states->remote, fetch_map);
 	for (ref = stale_refs; ref; ref = ref->next) {
 		struct string_list_item *item =
-			string_list_append(abbrev_branch(ref->name), &states->stale);
+			string_list_append(&states->stale, abbrev_branch(ref->name));
 		item->util = xstrdup(ref->name);
 	}
 	free_refs(stale_refs);
@@ -348,7 +348,7 @@
 		PUSH_STATUS_UPTODATE,
 		PUSH_STATUS_FASTFORWARD,
 		PUSH_STATUS_OUTOFDATE,
-		PUSH_STATUS_NOTQUERIED,
+		PUSH_STATUS_NOTQUERIED
 	} status;
 };
 
@@ -375,8 +375,8 @@
 			continue;
 		hashcpy(ref->new_sha1, ref->peer_ref->new_sha1);
 
-		item = string_list_append(abbrev_branch(ref->peer_ref->name),
-					  &states->push);
+		item = string_list_append(&states->push,
+					  abbrev_branch(ref->peer_ref->name));
 		item->util = xcalloc(sizeof(struct push_info), 1);
 		info = item->util;
 		info->forced = ref->force;
@@ -411,7 +411,7 @@
 
 	states->push.strdup_strings = 1;
 	if (!remote->push_refspec_nr) {
-		item = string_list_append("(matching)", &states->push);
+		item = string_list_append(&states->push, "(matching)");
 		info = item->util = xcalloc(sizeof(struct push_info), 1);
 		info->status = PUSH_STATUS_NOTQUERIED;
 		info->dest = xstrdup(item->string);
@@ -419,11 +419,11 @@
 	for (i = 0; i < remote->push_refspec_nr; i++) {
 		struct refspec *spec = remote->push + i;
 		if (spec->matching)
-			item = string_list_append("(matching)", &states->push);
+			item = string_list_append(&states->push, "(matching)");
 		else if (strlen(spec->src))
-			item = string_list_append(spec->src, &states->push);
+			item = string_list_append(&states->push, spec->src);
 		else
-			item = string_list_append("(delete)", &states->push);
+			item = string_list_append(&states->push, "(delete)");
 
 		info = item->util = xcalloc(sizeof(struct push_info), 1);
 		info->forced = spec->force;
@@ -447,7 +447,7 @@
 	matches = guess_remote_head(find_ref_by_name(remote_refs, "HEAD"),
 				    fetch_map, 1);
 	for (ref = matches; ref; ref = ref->next)
-		string_list_append(abbrev_branch(ref->name), &states->heads);
+		string_list_append(&states->heads, abbrev_branch(ref->name));
 
 	free_refs(fetch_map);
 	free_refs(matches);
@@ -511,8 +511,8 @@
 	if (prefixcmp(refname, "refs/remotes")) {
 		/* advise user how to delete local branches */
 		if (!prefixcmp(refname, "refs/heads/"))
-			string_list_append(abbrev_branch(refname),
-					   branches->skipped);
+			string_list_append(branches->skipped,
+					   abbrev_branch(refname));
 		/* silently skip over other non-remote refs */
 		return 0;
 	}
@@ -521,7 +521,7 @@
 	if (flags & REF_ISSYMREF)
 		return unlink(git_path("%s", refname));
 
-	item = string_list_append(refname, branches->branches);
+	item = string_list_append(branches->branches, refname);
 	item->util = xmalloc(20);
 	hashcpy(item->util, sha1);
 
@@ -546,7 +546,7 @@
 
 	strbuf_addf(&buf, "refs/remotes/%s", rename->old);
 	if (!prefixcmp(refname, buf.buf)) {
-		item = string_list_append(xstrdup(refname), rename->remote_branches);
+		item = string_list_append(rename->remote_branches, xstrdup(refname));
 		symref = resolve_ref(refname, orig_sha1, 1, &flag);
 		if (flag & REF_ISSYMREF)
 			item->util = xstrdup(symref);
@@ -736,11 +736,14 @@
 	struct known_remotes known_remotes = { NULL, NULL };
 	struct string_list branches = { NULL, 0, 0, 1 };
 	struct string_list skipped = { NULL, 0, 0, 1 };
-	struct branches_for_remote cb_data = {
-		NULL, &branches, &skipped, &known_remotes
-	};
+	struct branches_for_remote cb_data;
 	int i, result;
 
+	memset(&cb_data, 0, sizeof(cb_data));
+	cb_data.branches = &branches;
+	cb_data.skipped = &skipped;
+	cb_data.keep = &known_remotes;
+
 	if (argc != 2)
 		usage_with_options(builtin_remote_rm_usage, options);
 
@@ -829,7 +832,7 @@
 	memset(&refspec, 0, sizeof(refspec));
 	refspec.dst = (char *)refname;
 	if (!remote_find_tracking(states->remote, &refspec))
-		string_list_append(abbrev_branch(refspec.src), &states->tracked);
+		string_list_append(&states->tracked, abbrev_branch(refspec.src));
 
 	return 0;
 }
@@ -882,7 +885,7 @@
 	int n = strlen(item->string);
 	if (n > info->width)
 		info->width = n;
-	string_list_insert(item->string, info->list);
+	string_list_insert(info->list, item->string);
 	return 0;
 }
 
@@ -929,7 +932,7 @@
 	if (branch_info->rebase)
 		show_info->any_rebase = 1;
 
-	item = string_list_insert(branch_item->string, show_info->list);
+	item = string_list_insert(show_info->list, branch_item->string);
 	item->util = branch_info;
 
 	return 0;
@@ -977,7 +980,7 @@
 		show_info->width = n;
 	if ((n = strlen(push_info->dest)) > show_info->width2)
 		show_info->width2 = n;
-	item = string_list_append(push_item->string, show_info->list);
+	item = string_list_append(show_info->list, push_item->string);
 	item->util = push_item->util;
 	return 0;
 }
@@ -1093,24 +1096,24 @@
 
 		/* remote branch info */
 		info.width = 0;
-		for_each_string_list(add_remote_to_show_info, &states.new, &info);
-		for_each_string_list(add_remote_to_show_info, &states.tracked, &info);
-		for_each_string_list(add_remote_to_show_info, &states.stale, &info);
+		for_each_string_list(&states.new, add_remote_to_show_info, &info);
+		for_each_string_list(&states.tracked, add_remote_to_show_info, &info);
+		for_each_string_list(&states.stale, add_remote_to_show_info, &info);
 		if (info.list->nr)
 			printf("  Remote branch%s:%s\n",
 			       info.list->nr > 1 ? "es" : "",
 				no_query ? " (status not queried)" : "");
-		for_each_string_list(show_remote_info_item, info.list, &info);
+		for_each_string_list(info.list, show_remote_info_item, &info);
 		string_list_clear(info.list, 0);
 
 		/* git pull info */
 		info.width = 0;
 		info.any_rebase = 0;
-		for_each_string_list(add_local_to_show_info, &branch_list, &info);
+		for_each_string_list(&branch_list, add_local_to_show_info, &info);
 		if (info.list->nr)
 			printf("  Local branch%s configured for 'git pull':\n",
 			       info.list->nr > 1 ? "es" : "");
-		for_each_string_list(show_local_info_item, info.list, &info);
+		for_each_string_list(info.list, show_local_info_item, &info);
 		string_list_clear(info.list, 0);
 
 		/* git push info */
@@ -1118,14 +1121,14 @@
 			printf("  Local refs will be mirrored by 'git push'\n");
 
 		info.width = info.width2 = 0;
-		for_each_string_list(add_push_to_show_info, &states.push, &info);
+		for_each_string_list(&states.push, add_push_to_show_info, &info);
 		qsort(info.list->items, info.list->nr,
 			sizeof(*info.list->items), cmp_string_with_push);
 		if (info.list->nr)
 			printf("  Local ref%s configured for 'git push'%s:\n",
 				info.list->nr > 1 ? "s" : "",
 				no_query ? " (status not queried)" : "");
-		for_each_string_list(show_push_info_item, info.list, &info);
+		for_each_string_list(info.list, show_push_info_item, &info);
 		string_list_clear(info.list, 0);
 
 		free_remote_ref_states(&states);
@@ -1457,10 +1460,10 @@
 
 	if (remote->url_nr > 0) {
 		strbuf_addf(&url_buf, "%s (fetch)", remote->url[0]);
-		string_list_append(remote->name, list)->util =
+		string_list_append(list, remote->name)->util =
 				strbuf_detach(&url_buf, NULL);
 	} else
-		string_list_append(remote->name, list)->util = NULL;
+		string_list_append(list, remote->name)->util = NULL;
 	if (remote->pushurl_nr) {
 		url = remote->pushurl;
 		url_nr = remote->pushurl_nr;
@@ -1471,7 +1474,7 @@
 	for (i = 0; i < url_nr; i++)
 	{
 		strbuf_addf(&url_buf, "%s (push)", url[i]);
-		string_list_append(remote->name, list)->util =
+		string_list_append(list, remote->name)->util =
 				strbuf_detach(&url_buf, NULL);
 	}
 
diff --git a/builtin/rerere.c b/builtin/rerere.c
index 0048f9e..980d542 100644
--- a/builtin/rerere.c
+++ b/builtin/rerere.c
@@ -59,7 +59,7 @@
 		cutoff = (has_rerere_resolution(e->d_name)
 			  ? cutoff_resolve : cutoff_noresolve);
 		if (then < now - cutoff * 86400)
-			string_list_append(e->d_name, &to_remove);
+			string_list_append(&to_remove, e->d_name);
 	}
 	for (i = 0; i < to_remove.nr; i++)
 		unlink_rr_item(to_remove.items[i].string);
diff --git a/builtin/rev-list.c b/builtin/rev-list.c
index 51ceb19..efe9360 100644
--- a/builtin/rev-list.c
+++ b/builtin/rev-list.c
@@ -50,6 +50,15 @@
 
 	graph_show_commit(revs->graph);
 
+	if (revs->count) {
+		if (commit->object.flags & SYMMETRIC_LEFT)
+			revs->count_left++;
+		else
+			revs->count_right++;
+		finish_commit(commit, data);
+		return;
+	}
+
 	if (info->show_timestamp)
 		printf("%lu ", commit->date);
 	if (info->header_prefix)
@@ -400,5 +409,12 @@
 			     quiet ? finish_object : show_object,
 			     &info);
 
+	if (revs.count) {
+		if (revs.left_right)
+			printf("%d\t%d\n", revs.count_left, revs.count_right);
+		else
+			printf("%d\n", revs.count_left + revs.count_right);
+	}
+
 	return 0;
 }
diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c
index 8fbf9d0..b676e29 100644
--- a/builtin/rev-parse.c
+++ b/builtin/rev-parse.c
@@ -408,7 +408,8 @@
 	memset(opts + onb, 0, sizeof(opts[onb]));
 	argc = parse_options(argc, argv, prefix, opts, usage,
 			keep_dashdash ? PARSE_OPT_KEEP_DASHDASH : 0 |
-			stop_at_non_option ? PARSE_OPT_STOP_AT_NON_OPTION : 0);
+			stop_at_non_option ? PARSE_OPT_STOP_AT_NON_OPTION : 0 |
+			PARSE_OPT_SHELL_EVAL);
 
 	strbuf_addf(&parsed, " --");
 	sq_quote_argv(&parsed, argv, 0);
diff --git a/builtin/revert.c b/builtin/revert.c
index 7976b5a..8b9d829 100644
--- a/builtin/revert.c
+++ b/builtin/revert.c
@@ -39,7 +39,8 @@
 static int edit, no_replay, no_commit, mainline, signoff, allow_ff;
 static enum { REVERT, CHERRY_PICK } action;
 static struct commit *commit;
-static const char *commit_name;
+static int commit_argc;
+static const char **commit_argv;
 static int allow_rerere_auto;
 
 static const char *me;
@@ -49,16 +50,18 @@
 
 static char *get_encoding(const char *message);
 
+static const char * const *revert_or_cherry_pick_usage(void)
+{
+	return action == REVERT ? revert_usage : cherry_pick_usage;
+}
+
 static void parse_args(int argc, const char **argv)
 {
-	const char * const * usage_str =
-		action == REVERT ?  revert_usage : cherry_pick_usage;
-	unsigned char sha1[20];
+	const char * const * usage_str = revert_or_cherry_pick_usage();
 	int noop;
 	struct option options[] = {
 		OPT_BOOLEAN('n', "no-commit", &no_commit, "don't automatically commit"),
 		OPT_BOOLEAN('e', "edit", &edit, "edit the commit message"),
-		OPT_BOOLEAN('x', NULL, &no_replay, "append commit name when cherry-picking"),
 		OPT_BOOLEAN('r', NULL, &noop, "no-op (backward compatibility)"),
 		OPT_BOOLEAN('s', "signoff", &signoff, "add Signed-off-by:"),
 		OPT_INTEGER('m', "mainline", &mainline, "parent number"),
@@ -71,6 +74,7 @@
 
 	if (action == CHERRY_PICK) {
 		struct option cp_extra[] = {
+			OPT_BOOLEAN('x', NULL, &no_replay, "append commit name"),
 			OPT_BOOLEAN(0, "ff", &allow_ff, "allow fast-forward"),
 			OPT_END(),
 		};
@@ -78,15 +82,13 @@
 			die("program error");
 	}
 
-	if (parse_options(argc, argv, NULL, options, usage_str, 0) != 1)
+	commit_argc = parse_options(argc, argv, NULL, options, usage_str,
+				    PARSE_OPT_KEEP_ARGV0 |
+				    PARSE_OPT_KEEP_UNKNOWN);
+	if (commit_argc < 2)
 		usage_with_options(usage_str, options);
 
-	commit_name = argv[0];
-	if (get_sha1(commit_name, sha1))
-		die ("Cannot find '%s'", commit_name);
-	commit = lookup_commit_reference(sha1);
-	if (!commit)
-		exit(1);
+	commit_argv = argv;
 }
 
 struct commit_message {
@@ -239,7 +241,7 @@
 			sha1_to_hex(commit->object.sha1));
 }
 
-static char *help_msg(const char *name)
+static char *help_msg(void)
 {
 	struct strbuf helpbuf = STRBUF_INIT;
 	char *msg = getenv("GIT_CHERRY_PICK_HELP");
@@ -255,7 +257,7 @@
 		strbuf_addf(&helpbuf, " with: \n"
 			"\n"
 			"        git commit -c %s\n",
-			name);
+			    sha1_to_hex(commit->object.sha1));
 	}
 	else
 		strbuf_addch(&helpbuf, '.');
@@ -357,7 +359,7 @@
 		}
 		write_message(msgbuf, defmsg);
 		fprintf(stderr, "Automatic %s failed.%s\n",
-			me, help_msg(commit_name));
+			me, help_msg());
 		rerere(allow_rerere_auto);
 		exit(1);
 	}
@@ -365,7 +367,7 @@
 	fprintf(stderr, "Finished one %s.\n", me);
 }
 
-static int revert_or_cherry_pick(int argc, const char **argv)
+static int do_pick_commit(void)
 {
 	unsigned char head[20];
 	struct commit *base, *next, *parent;
@@ -374,28 +376,6 @@
 	char *defmsg = NULL;
 	struct strbuf msgbuf = STRBUF_INIT;
 
-	git_config(git_default_config, NULL);
-	me = action == REVERT ? "revert" : "cherry-pick";
-	setenv(GIT_REFLOG_ACTION, me, 0);
-	parse_args(argc, argv);
-
-	/* this is copied from the shell script, but it's never triggered... */
-	if (action == REVERT && !no_replay)
-		die("revert is incompatible with replay");
-
-	if (allow_ff) {
-		if (signoff)
-			die("cherry-pick --ff cannot be used with --signoff");
-		if (no_commit)
-			die("cherry-pick --ff cannot be used with --no-commit");
-		if (no_replay)
-			die("cherry-pick --ff cannot be used with -x");
-		if (edit)
-			die("cherry-pick --ff cannot be used with --edit");
-	}
-
-	if (read_cache() < 0)
-		die("git %s: failed to read the index", me);
 	if (no_commit) {
 		/*
 		 * We do not intend to commit immediately.  We just want to
@@ -506,12 +486,14 @@
 		free_commit_list(remotes);
 		if (res) {
 			fprintf(stderr, "Automatic %s with strategy %s failed.%s\n",
-				me, strategy, help_msg(commit_name));
+				me, strategy, help_msg());
 			rerere(allow_rerere_auto);
 			exit(1);
 		}
 	}
 
+	free_message(&msg);
+
 	/*
 	 *
 	 * If we are cherry-pick, and if the merge did not result in
@@ -524,7 +506,9 @@
 	if (!no_commit) {
 		/* 6 is max possible length of our args array including NULL */
 		const char *args[6];
+		int res;
 		int i = 0;
+
 		args[i++] = "commit";
 		args[i++] = "-n";
 		if (signoff)
@@ -534,26 +518,81 @@
 			args[i++] = defmsg;
 		}
 		args[i] = NULL;
-		return execv_git_cmd(args);
+		res = run_command_v_opt(args, RUN_GIT_CMD);
+		free(defmsg);
+
+		return res;
 	}
-	free_message(&msg);
+
 	free(defmsg);
 
 	return 0;
 }
 
+static void prepare_revs(struct rev_info *revs)
+{
+	int argc;
+
+	init_revisions(revs, NULL);
+	revs->no_walk = 1;
+	if (action != REVERT)
+		revs->reverse = 1;
+
+	argc = setup_revisions(commit_argc, commit_argv, revs, NULL);
+	if (argc > 1)
+		usage(*revert_or_cherry_pick_usage());
+
+	if (prepare_revision_walk(revs))
+		die("revision walk setup failed");
+
+	if (!revs->commits)
+		die("empty commit set passed");
+}
+
+static int revert_or_cherry_pick(int argc, const char **argv)
+{
+	struct rev_info revs;
+
+	git_config(git_default_config, NULL);
+	me = action == REVERT ? "revert" : "cherry-pick";
+	setenv(GIT_REFLOG_ACTION, me, 0);
+	parse_args(argc, argv);
+
+	if (allow_ff) {
+		if (signoff)
+			die("cherry-pick --ff cannot be used with --signoff");
+		if (no_commit)
+			die("cherry-pick --ff cannot be used with --no-commit");
+		if (no_replay)
+			die("cherry-pick --ff cannot be used with -x");
+		if (edit)
+			die("cherry-pick --ff cannot be used with --edit");
+	}
+
+	if (read_cache() < 0)
+		die("git %s: failed to read the index", me);
+
+	prepare_revs(&revs);
+
+	while ((commit = get_revision(&revs))) {
+		int res = do_pick_commit();
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
 int cmd_revert(int argc, const char **argv, const char *prefix)
 {
 	if (isatty(0))
 		edit = 1;
-	no_replay = 1;
 	action = REVERT;
 	return revert_or_cherry_pick(argc, argv);
 }
 
 int cmd_cherry_pick(int argc, const char **argv, const char *prefix)
 {
-	no_replay = 0;
 	action = CHERRY_PICK;
 	return revert_or_cherry_pick(argc, argv);
 }
diff --git a/builtin/shortlog.c b/builtin/shortlog.c
index 5089502..0a9681b 100644
--- a/builtin/shortlog.c
+++ b/builtin/shortlog.c
@@ -84,7 +84,7 @@
 		snprintf(namebuf + len, room, " <%.*s>", maillen, emailbuf);
 	}
 
-	item = string_list_insert(namebuf, &log->list);
+	item = string_list_insert(&log->list, namebuf);
 	if (item->util == NULL)
 		item->util = xcalloc(1, sizeof(struct string_list));
 
@@ -115,7 +115,7 @@
 		}
 	}
 
-	string_list_append(buffer, item->util);
+	string_list_append(item->util, buffer);
 }
 
 static void read_from_stdin(struct shortlog *log)
diff --git a/builtin/show-ref.c b/builtin/show-ref.c
index 17ada88..0b2a9ad 100644
--- a/builtin/show-ref.c
+++ b/builtin/show-ref.c
@@ -105,7 +105,7 @@
 static int add_existing(const char *refname, const unsigned char *sha1, int flag, void *cbdata)
 {
 	struct string_list *list = (struct string_list *)cbdata;
-	string_list_insert(refname, list);
+	string_list_insert(list, refname);
 	return 0;
 }
 
diff --git a/cache.h b/cache.h
index c966023..c9fa3df 100644
--- a/cache.h
+++ b/cache.h
@@ -361,7 +361,7 @@
 	OBJ_OFS_DELTA = 6,
 	OBJ_REF_DELTA = 7,
 	OBJ_ANY,
-	OBJ_MAX,
+	OBJ_MAX
 };
 
 static inline enum object_type object_type(unsigned int mode)
@@ -547,7 +547,6 @@
 extern size_t packed_git_window_size;
 extern size_t packed_git_limit;
 extern size_t delta_base_cache_limit;
-extern int auto_crlf;
 extern int read_replace_refs;
 extern int fsync_object_files;
 extern int core_preload_index;
@@ -556,32 +555,53 @@
 enum safe_crlf {
 	SAFE_CRLF_FALSE = 0,
 	SAFE_CRLF_FAIL = 1,
-	SAFE_CRLF_WARN = 2,
+	SAFE_CRLF_WARN = 2
 };
 
 extern enum safe_crlf safe_crlf;
 
+enum auto_crlf {
+	AUTO_CRLF_FALSE = 0,
+	AUTO_CRLF_TRUE = 1,
+	AUTO_CRLF_INPUT = -1,
+};
+
+extern enum auto_crlf auto_crlf;
+
+enum eol {
+	EOL_UNSET,
+	EOL_CRLF,
+	EOL_LF,
+#ifdef NATIVE_CRLF
+	EOL_NATIVE = EOL_CRLF
+#else
+	EOL_NATIVE = EOL_LF
+#endif
+};
+
+extern enum eol eol;
+
 enum branch_track {
 	BRANCH_TRACK_UNSPECIFIED = -1,
 	BRANCH_TRACK_NEVER = 0,
 	BRANCH_TRACK_REMOTE,
 	BRANCH_TRACK_ALWAYS,
 	BRANCH_TRACK_EXPLICIT,
-	BRANCH_TRACK_OVERRIDE,
+	BRANCH_TRACK_OVERRIDE
 };
 
 enum rebase_setup_type {
 	AUTOREBASE_NEVER = 0,
 	AUTOREBASE_LOCAL,
 	AUTOREBASE_REMOTE,
-	AUTOREBASE_ALWAYS,
+	AUTOREBASE_ALWAYS
 };
 
 enum push_default_type {
 	PUSH_DEFAULT_NOTHING = 0,
 	PUSH_DEFAULT_MATCHING,
 	PUSH_DEFAULT_TRACKING,
-	PUSH_DEFAULT_CURRENT,
+	PUSH_DEFAULT_CURRENT
 };
 
 extern enum branch_track git_branch_track;
@@ -590,7 +610,7 @@
 
 enum object_creation_mode {
 	OBJECT_CREATION_USES_HARDLINKS = 0,
-	OBJECT_CREATION_USES_RENAMES = 1,
+	OBJECT_CREATION_USES_RENAMES = 1
 };
 
 extern enum object_creation_mode object_creation_mode;
@@ -670,7 +690,7 @@
 	OLD_PERM_GROUP      = 1,
 	OLD_PERM_EVERYBODY  = 2,
 	PERM_GROUP          = 0660,
-	PERM_EVERYBODY      = 0664,
+	PERM_EVERYBODY      = 0664
 };
 int git_config_perm(const char *var, const char *value);
 int set_shared_perm(const char *path, int mode);
@@ -730,12 +750,23 @@
 #define MINIMUM_ABBREV 4
 #define DEFAULT_ABBREV 7
 
+struct object_context {
+	unsigned char tree[20];
+	char path[PATH_MAX];
+	unsigned mode;
+};
+
 extern int get_sha1(const char *str, unsigned char *sha1);
 extern int get_sha1_with_mode_1(const char *str, unsigned char *sha1, unsigned *mode, int gently, const char *prefix);
 static inline int get_sha1_with_mode(const char *str, unsigned char *sha1, unsigned *mode)
 {
 	return get_sha1_with_mode_1(str, sha1, mode, 1, NULL);
 }
+extern int get_sha1_with_context_1(const char *name, unsigned char *sha1, struct object_context *orc, int gently, const char *prefix);
+static inline int get_sha1_with_context(const char *str, unsigned char *sha1, struct object_context *orc)
+{
+	return get_sha1_with_context_1(str, sha1, orc, 1, NULL);
+}
 extern int get_sha1_hex(const char *hex, unsigned char *sha1);
 extern char *sha1_to_hex(const unsigned char *sha1);	/* static buffer result! */
 extern int read_ref(const char *filename, unsigned char *sha1);
@@ -882,7 +913,7 @@
 		REF_STATUS_REJECT_NODELETE,
 		REF_STATUS_UPTODATE,
 		REF_STATUS_REMOTE_REJECT,
-		REF_STATUS_EXPECTING_REPORT,
+		REF_STATUS_EXPECTING_REPORT
 	} status;
 	char *remote_status;
 	struct ref *peer_ref; /* when renaming */
diff --git a/commit.h b/commit.h
index ba818fc..eb2b8ac 100644
--- a/commit.h
+++ b/commit.h
@@ -61,7 +61,7 @@
 	CMIT_FMT_EMAIL,
 	CMIT_FMT_USERFORMAT,
 
-	CMIT_FMT_UNSPECIFIED,
+	CMIT_FMT_UNSPECIFIED
 };
 
 struct pretty_print_context
diff --git a/compat/mingw.h b/compat/mingw.h
index f465566..3b2477b 100644
--- a/compat/mingw.h
+++ b/compat/mingw.h
@@ -89,7 +89,7 @@
 { return 1; }
 static inline struct passwd *getpwnam(const char *name)
 { return NULL; }
-static inline int fcntl(int fd, int cmd, long arg)
+static inline int fcntl(int fd, int cmd, ...)
 {
 	if (cmd == F_GETFD || cmd == F_SETFD)
 		return 0;
diff --git a/compat/win32/pthread.c b/compat/win32/pthread.c
index 0f949fc..010e875 100644
--- a/compat/win32/pthread.c
+++ b/compat/win32/pthread.c
@@ -16,6 +16,7 @@
 static unsigned __stdcall win32_start_routine(void *arg)
 {
 	pthread_t *thread = arg;
+	thread->tid = GetCurrentThreadId();
 	thread->arg = thread->start_routine(thread->arg);
 	return 0;
 }
@@ -49,6 +50,13 @@
 	}
 }
 
+pthread_t pthread_self(void)
+{
+	pthread_t t = { 0 };
+	t.tid = GetCurrentThreadId();
+	return t;
+}
+
 int pthread_cond_init(pthread_cond_t *cond, const void *unused)
 {
 	cond->waiters = 0;
diff --git a/compat/win32/pthread.h b/compat/win32/pthread.h
index a45f8d6..2e20548 100644
--- a/compat/win32/pthread.h
+++ b/compat/win32/pthread.h
@@ -58,6 +58,7 @@
 	HANDLE handle;
 	void *(*start_routine)(void*);
 	void *arg;
+	DWORD tid;
 } pthread_t;
 
 extern int pthread_create(pthread_t *thread, const void *unused,
@@ -71,4 +72,28 @@
 
 extern int win32_pthread_join(pthread_t *thread, void **value_ptr);
 
+#define pthread_equal(t1, t2) ((t1).tid == (t2).tid)
+extern pthread_t pthread_self(void);
+
+static inline int pthread_exit(void *ret)
+{
+	ExitThread((DWORD)ret);
+}
+
+typedef DWORD pthread_key_t;
+static inline int pthread_key_create(pthread_key_t *keyp, void (*destructor)(void *value))
+{
+	return (*keyp = TlsAlloc()) == TLS_OUT_OF_INDEXES ? EAGAIN : 0;
+}
+
+static inline int pthread_setspecific(pthread_key_t key, const void *value)
+{
+	return TlsSetValue(key, (void *)value) ? 0 : EINVAL;
+}
+
+static inline void *pthread_getspecific(pthread_key_t key)
+{
+	return TlsGetValue(key);
+}
+
 #endif /* PTHREAD_H */
diff --git a/config.c b/config.c
index 9b6b1df..cdcf583 100644
--- a/config.c
+++ b/config.c
@@ -517,7 +517,9 @@
 
 	if (!strcmp(var, "core.autocrlf")) {
 		if (value && !strcasecmp(value, "input")) {
-			auto_crlf = -1;
+			if (eol == EOL_CRLF)
+				return error("core.autocrlf=input conflicts with core.eol=crlf");
+			auto_crlf = AUTO_CRLF_INPUT;
 			return 0;
 		}
 		auto_crlf = git_config_bool(var, value);
@@ -533,6 +535,20 @@
 		return 0;
 	}
 
+	if (!strcmp(var, "core.eol")) {
+		if (value && !strcasecmp(value, "lf"))
+			eol = EOL_LF;
+		else if (value && !strcasecmp(value, "crlf"))
+			eol = EOL_CRLF;
+		else if (value && !strcasecmp(value, "native"))
+			eol = EOL_NATIVE;
+		else
+			eol = EOL_UNSET;
+		if (eol == EOL_CRLF && auto_crlf == AUTO_CRLF_INPUT)
+			return error("core.autocrlf=input conflicts with core.eol=crlf");
+		return 0;
+	}
+
 	if (!strcmp(var, "core.notesref")) {
 		notes_ref_name = xstrdup(value);
 		return 0;
diff --git a/config.mak.in b/config.mak.in
index 0d4b64d..b4e65c3 100644
--- a/config.mak.in
+++ b/config.mak.in
@@ -3,10 +3,12 @@
 
 CC = @CC@
 CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
 LDFLAGS = @LDFLAGS@
 CC_LD_DYNPATH = @CC_LD_DYNPATH@
 AR = @AR@
 TAR = @TAR@
+DIFF = @DIFF@
 #INSTALL = @INSTALL@		# needs install-sh or install.sh in sources
 TCLTK_PATH = @TCLTK_PATH@
 
@@ -42,6 +44,7 @@
 NO_SOCKADDR_STORAGE=@NO_SOCKADDR_STORAGE@
 NO_IPV6=@NO_IPV6@
 NO_C99_FORMAT=@NO_C99_FORMAT@
+NO_HSTRERROR=@NO_HSTRERROR@
 NO_STRCASESTR=@NO_STRCASESTR@
 NO_MEMMEM=@NO_MEMMEM@
 NO_STRLCPY=@NO_STRLCPY@
@@ -51,10 +54,15 @@
 NO_UNSETENV=@NO_UNSETENV@
 NO_MKDTEMP=@NO_MKDTEMP@
 NO_MKSTEMPS=@NO_MKSTEMPS@
+NO_INET_NTOP=@NO_INET_NTOP@
+NO_INET_PTON=@NO_INET_PTON@
 NO_ICONV=@NO_ICONV@
 OLD_ICONV=@OLD_ICONV@
 NO_DEFLATE_BOUND=@NO_DEFLATE_BOUND@
+INLINE=@INLINE@
+SOCKLEN_T=@SOCKLEN_T@
 FREAD_READS_DIRECTORIES=@FREAD_READS_DIRECTORIES@
 SNPRINTF_RETURNS_BOGUS=@SNPRINTF_RETURNS_BOGUS@
 NO_PTHREADS=@NO_PTHREADS@
+PTHREAD_CFLAGS=@PTHREAD_CFLAGS@
 PTHREAD_LIBS=@PTHREAD_LIBS@
diff --git a/configure.ac b/configure.ac
index 71038fc..5601e8b 100644
--- a/configure.ac
+++ b/configure.ac
@@ -327,6 +327,12 @@
 AC_MSG_NOTICE([CHECKS for programs])
 #
 AC_PROG_CC([cc gcc])
+AC_C_INLINE
+case $ac_cv_c_inline in
+  inline | yes | no)	;;
+  *)			AC_SUBST([INLINE], [$ac_cv_c_inline]) ;;
+esac
+
 # which switch to pass runtime path to dynamic libraries to the linker
 AC_CACHE_CHECK([if linker supports -R], git_cv_ld_dashr, [
    SAVE_LDFLAGS="${LDFLAGS}"
@@ -362,6 +368,7 @@
 #AC_PROG_INSTALL		# needs install-sh or install.sh in sources
 AC_CHECK_TOOLS(AR, [gar ar], :)
 AC_CHECK_PROGS(TAR, [gtar tar])
+AC_CHECK_PROGS(DIFF, [gnudiff gdiff diff])
 # TCLTK_PATH will be set to some value if we want Tcl/Tk
 # or will be empty otherwise.
 if test -z "$NO_TCLTK"; then
@@ -544,13 +551,47 @@
 test -n "$NEEDS_SOCKET" && LIBS="$LIBS -lsocket"
 
 #
-# Define NEEDS_RESOLV if linking with -lnsl and/or -lsocket is not enough.
-# Notably on Solaris hstrerror resides in libresolv and on Solaris 7
-# inet_ntop and inet_pton additionally reside there.
-AC_CHECK_LIB([c], [hstrerror],
-[NEEDS_RESOLV=],
-[NEEDS_RESOLV=YesPlease])
+# The next few tests will define NEEDS_RESOLV if linking with
+# libresolv provides some of the functions we would normally get
+# from libc.
+NEEDS_RESOLV=
 AC_SUBST(NEEDS_RESOLV)
+#
+# Define NO_INET_NTOP if linking with -lresolv is not enough.
+# Solaris 2.7 in particular hos inet_ntop in -lresolv.
+NO_INET_NTOP=
+AC_SUBST(NO_INET_NTOP)
+AC_CHECK_FUNC([inet_ntop],
+	[],
+    [AC_CHECK_LIB([resolv], [inet_ntop],
+	    [NEEDS_RESOLV=YesPlease],
+	[NO_INET_NTOP=YesPlease])
+])
+#
+# Define NO_INET_PTON if linking with -lresolv is not enough.
+# Solaris 2.7 in particular hos inet_pton in -lresolv.
+NO_INET_PTON=
+AC_SUBST(NO_INET_PTON)
+AC_CHECK_FUNC([inet_pton],
+	[],
+    [AC_CHECK_LIB([resolv], [inet_pton],
+	    [NEEDS_RESOLV=YesPlease],
+	[NO_INET_PTON=YesPlease])
+])
+#
+# Define NO_HSTRERROR if linking with -lresolv is not enough.
+# Solaris 2.6 in particular has no hstrerror, even in -lresolv.
+NO_HSTRERROR=
+AC_CHECK_FUNC([hstrerror],
+	[],
+    [AC_CHECK_LIB([resolv], [hstrerror],
+	    [NEEDS_RESOLV=YesPlease],
+	[NO_HSTRERROR=YesPlease])
+])
+AC_SUBST(NO_HSTRERROR)
+#
+# If any of the above tests determined that -lresolv is needed at
+# build-time, also set it here for remaining configure-time checks.
 test -n "$NEEDS_RESOLV" && LIBS="$LIBS -lresolv"
 
 AC_CHECK_LIB([c], [basename],
@@ -598,6 +639,12 @@
 ## Checks for typedefs, structures, and compiler characteristics.
 AC_MSG_NOTICE([CHECKS for typedefs, structures, and compiler characteristics])
 #
+TYPE_SOCKLEN_T
+case $ac_cv_type_socklen_t in
+  yes)	;;
+  *)  	AC_SUBST([SOCKLEN_T], [$git_cv_socklen_t_equiv]) ;;
+esac
+
 # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
 AC_CHECK_MEMBER(struct dirent.d_ino,
 [NO_D_INO_IN_DIRENT=],
@@ -808,7 +855,11 @@
 int main(void)
 {
 	pthread_mutex_t test_mutex;
-	return (0);
+	int retcode = 0;
+	retcode |= pthread_mutex_init(&test_mutex,(void *)0);
+	retcode |= pthread_mutex_lock(&test_mutex);
+	retcode |= pthread_mutex_unlock(&test_mutex);
+	return retcode;
 }
 ])
 
@@ -825,7 +876,8 @@
 # handle these separately since PTHREAD_CFLAGS could be '-lpthreads
 # -D_REENTRANT' or some such.
 elif test -z "$PTHREAD_CFLAGS"; then
-  for opt in -pthread -lpthread; do
+  threads_found=no
+  for opt in -mt -pthread -lpthread; do
      old_CFLAGS="$CFLAGS"
      CFLAGS="$opt $CFLAGS"
      AC_MSG_CHECKING([Checking for POSIX Threads with '$opt'])
@@ -833,11 +885,18 @@
 	[AC_MSG_RESULT([yes])
 		NO_PTHREADS=
 		PTHREAD_LIBS="$opt"
+		PTHREAD_CFLAGS="$opt"
+		threads_found=yes
 		break
 	],
 	[AC_MSG_RESULT([no])])
       CFLAGS="$old_CFLAGS"
   done
+  if test $threads_found != yes; then
+    AC_CHECK_LIB([pthread], [pthread_create],
+	[PTHREAD_LIBS="-lpthread"],
+	[NO_PTHREADS=UnfortunatelyYes])
+  fi
 else
   old_CFLAGS="$CFLAGS"
   CFLAGS="$PTHREAD_CFLAGS $CFLAGS"
@@ -854,6 +913,7 @@
 
 CFLAGS="$old_CFLAGS"
 
+AC_SUBST(PTHREAD_CFLAGS)
 AC_SUBST(PTHREAD_LIBS)
 AC_SUBST(NO_PTHREADS)
 
diff --git a/connect.c b/connect.c
index 0119bd3..02e738a 100644
--- a/connect.c
+++ b/connect.c
@@ -132,7 +132,7 @@
 enum protocol {
 	PROTO_LOCAL = 1,
 	PROTO_SSH,
-	PROTO_GIT,
+	PROTO_GIT
 };
 
 static enum protocol get_protocol(const char *name)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 57245a8..6756990 100755
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -42,6 +42,24 @@
 #       set GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're
 #       untracked files, then a '%' will be shown next to the branch name.
 #
+#       If you would like to see the difference between HEAD and its
+#       upstream, set GIT_PS1_SHOWUPSTREAM="auto".  A "<" indicates
+#       you are behind, ">" indicates you are ahead, and "<>"
+#       indicates you have diverged.  You can further control
+#       behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated
+#       list of values:
+#           verbose       show number of commits ahead/behind (+/-) upstream
+#           legacy        don't use the '--count' option available in recent
+#                         versions of git-rev-list
+#           git           always compare HEAD to @{upstream}
+#           svn           always compare HEAD to your SVN upstream
+#       By default, __git_ps1 will compare HEAD to your SVN upstream
+#       if it can find one, or @{upstream} otherwise.  Once you have
+#       set GIT_PS1_SHOWUPSTREAM, you can override it on a
+#       per-repository basis by setting the bash.showUpstream config
+#       variable.
+#
+#
 # To submit patches:
 #
 #    *) Read Documentation/SubmittingPatches
@@ -78,14 +96,133 @@
 	fi
 }
 
+# stores the divergence from upstream in $p
+# used by GIT_PS1_SHOWUPSTREAM
+__git_ps1_show_upstream ()
+{
+	local key value
+	local svn_remote=() svn_url_pattern count n
+	local upstream=git legacy="" verbose=""
+
+	# get some config options from git-config
+	while read key value; do
+		case "$key" in
+		bash.showupstream)
+			GIT_PS1_SHOWUPSTREAM="$value"
+			if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then
+				p=""
+				return
+			fi
+			;;
+		svn-remote.*.url)
+			svn_remote[ $((${#svn_remote[@]} + 1)) ]="$value"
+			svn_url_pattern+="\\|$value"
+			upstream=svn+git # default upstream is SVN if available, else git
+			;;
+		esac
+	done < <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ')
+
+	# parse configuration values
+	for option in ${GIT_PS1_SHOWUPSTREAM}; do
+		case "$option" in
+		git|svn) upstream="$option" ;;
+		verbose) verbose=1 ;;
+		legacy)  legacy=1  ;;
+		esac
+	done
+
+	# Find our upstream
+	case "$upstream" in
+	git)    upstream="@{upstream}" ;;
+	svn*)
+		# get the upstream from the "git-svn-id: ..." in a commit message
+		# (git-svn uses essentially the same procedure internally)
+		local svn_upstream=($(git log --first-parent -1 \
+					--grep="^git-svn-id: \(${svn_url_pattern:2}\)" 2>/dev/null))
+		if [[ 0 -ne ${#svn_upstream[@]} ]]; then
+			svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]}
+			svn_upstream=${svn_upstream%@*}
+			for ((n=1; "$n" <= "${#svn_remote[@]}"; ++n)); do
+				svn_upstream=${svn_upstream#${svn_remote[$n]}}
+			done
+
+			if [[ -z "$svn_upstream" ]]; then
+				# default branch name for checkouts with no layout:
+				upstream=${GIT_SVN_ID:-git-svn}
+			else
+				upstream=${svn_upstream#/}
+			fi
+		elif [[ "svn+git" = "$upstream" ]]; then
+			upstream="@{upstream}"
+		fi
+		;;
+	esac
+
+	# Find how many commits we are ahead/behind our upstream
+	if [[ -z "$legacy" ]]; then
+		count="$(git rev-list --count --left-right \
+				"$upstream"...HEAD 2>/dev/null)"
+	else
+		# produce equivalent output to --count for older versions of git
+		local commits
+		if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)"
+		then
+			local commit behind=0 ahead=0
+			for commit in $commits
+			do
+				case "$commit" in
+				"<"*) let ++behind
+					;;
+				*)    let ++ahead
+					;;
+				esac
+			done
+			count="$behind	$ahead"
+		else
+			count=""
+		fi
+	fi
+
+	# calculate the result
+	if [[ -z "$verbose" ]]; then
+		case "$count" in
+		"") # no upstream
+			p="" ;;
+		"0	0") # equal to upstream
+			p="=" ;;
+		"0	"*) # ahead of upstream
+			p=">" ;;
+		*"	0") # behind upstream
+			p="<" ;;
+		*)	    # diverged from upstream
+			p="<>" ;;
+		esac
+	else
+		case "$count" in
+		"") # no upstream
+			p="" ;;
+		"0	0") # equal to upstream
+			p=" u=" ;;
+		"0	"*) # ahead of upstream
+			p=" u+${count#0	}" ;;
+		*"	0") # behind upstream
+			p=" u-${count%	0}" ;;
+		*)	    # diverged from upstream
+			p=" u+${count#*	}-${count%	*}" ;;
+		esac
+	fi
+
+}
+
+
 # __git_ps1 accepts 0 or 1 arguments (i.e., format string)
 # returns text to add to bash PS1 prompt (includes branch name)
 __git_ps1 ()
 {
 	local g="$(__gitdir)"
 	if [ -n "$g" ]; then
-		local r
-		local b
+		local r=""
+		local b=""
 		if [ -f "$g/rebase-merge/interactive" ]; then
 			r="|REBASE-i"
 			b="$(cat "$g/rebase-merge/head-name")"
@@ -127,11 +264,12 @@
 			}
 		fi
 
-		local w
-		local i
-		local s
-		local u
-		local c
+		local w=""
+		local i=""
+		local s=""
+		local u=""
+		local c=""
+		local p=""
 
 		if [ "true" = "$(git rev-parse --is-inside-git-dir 2>/dev/null)" ]; then
 			if [ "true" = "$(git rev-parse --is-bare-repository 2>/dev/null)" ]; then
@@ -159,10 +297,14 @@
 			      u="%"
 			   fi
 			fi
+
+			if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then
+				__git_ps1_show_upstream
+			fi
 		fi
 
 		local f="$w$i$s$u"
-		printf "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r"
+		printf "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r$p"
 	fi
 }
 
@@ -842,7 +984,7 @@
 	--*)
 		__gitcomp "
 			--quiet --ours --theirs --track --no-track --merge
-			--conflict= --patch
+			--conflict= --orphan --patch
 			"
 		;;
 	*)
@@ -1052,7 +1194,7 @@
 			--numbered --start-number
 			--numbered-files
 			--keep-subject
-			--signoff
+			--signoff --signature --no-signature
 			--in-reply-to= --cc=
 			--full-index --binary
 			--not --all
@@ -1726,6 +1868,7 @@
 		format.headers
 		format.numbered
 		format.pretty
+		format.signature
 		format.signoff
 		format.subjectprefix
 		format.suffix
diff --git a/convert.c b/convert.c
index 5a0b7fb..e41a31e 100644
--- a/convert.c
+++ b/convert.c
@@ -8,13 +8,17 @@
  * This should use the pathname to decide on whether it wants to do some
  * more interesting conversions (automatic gzip/unzip, general format
  * conversions etc etc), but by default it just does automatic CRLF<->LF
- * translation when the "auto_crlf" option is set.
+ * translation when the "text" attribute or "auto_crlf" option is set.
  */
 
-#define CRLF_GUESS	(-1)
-#define CRLF_BINARY	0
-#define CRLF_TEXT	1
-#define CRLF_INPUT	2
+enum action {
+	CRLF_GUESS = -1,
+	CRLF_BINARY = 0,
+	CRLF_TEXT,
+	CRLF_INPUT,
+	CRLF_CRLF,
+	CRLF_AUTO,
+};
 
 struct text_stat {
 	/* NUL, CR, LF and CRLF counts */
@@ -89,49 +93,111 @@
 	return 0;
 }
 
-static void check_safe_crlf(const char *path, int action,
+static enum eol determine_output_conversion(enum action action) {
+	switch (action) {
+	case CRLF_BINARY:
+		return EOL_UNSET;
+	case CRLF_CRLF:
+		return EOL_CRLF;
+	case CRLF_INPUT:
+		return EOL_LF;
+	case CRLF_GUESS:
+		if (!auto_crlf)
+			return EOL_UNSET;
+		/* fall through */
+	case CRLF_TEXT:
+	case CRLF_AUTO:
+		if (auto_crlf == AUTO_CRLF_TRUE)
+			return EOL_CRLF;
+		else if (auto_crlf == AUTO_CRLF_INPUT)
+			return EOL_LF;
+		else if (eol == EOL_UNSET)
+			return EOL_NATIVE;
+	}
+	return eol;
+}
+
+static void check_safe_crlf(const char *path, enum action action,
                             struct text_stat *stats, enum safe_crlf checksafe)
 {
 	if (!checksafe)
 		return;
 
-	if (action == CRLF_INPUT || auto_crlf <= 0) {
+	if (determine_output_conversion(action) == EOL_LF) {
 		/*
 		 * CRLFs would not be restored by checkout:
 		 * check if we'd remove CRLFs
 		 */
 		if (stats->crlf) {
 			if (checksafe == SAFE_CRLF_WARN)
-				warning("CRLF will be replaced by LF in %s.", path);
+				warning("CRLF will be replaced by LF in %s.\nThe file will have its original line endings in your working directory.", path);
 			else /* i.e. SAFE_CRLF_FAIL */
 				die("CRLF would be replaced by LF in %s.", path);
 		}
-	} else if (auto_crlf > 0) {
+	} else if (determine_output_conversion(action) == EOL_CRLF) {
 		/*
 		 * CRLFs would be added by checkout:
 		 * check if we have "naked" LFs
 		 */
 		if (stats->lf != stats->crlf) {
 			if (checksafe == SAFE_CRLF_WARN)
-				warning("LF will be replaced by CRLF in %s", path);
+				warning("LF will be replaced by CRLF in %s.\nThe file will have its original line endings in your working directory.", path);
 			else /* i.e. SAFE_CRLF_FAIL */
 				die("LF would be replaced by CRLF in %s", path);
 		}
 	}
 }
 
+static int has_cr_in_index(const char *path)
+{
+	int pos, len;
+	unsigned long sz;
+	enum object_type type;
+	void *data;
+	int has_cr;
+	struct index_state *istate = &the_index;
+
+	len = strlen(path);
+	pos = index_name_pos(istate, path, len);
+	if (pos < 0) {
+		/*
+		 * We might be in the middle of a merge, in which
+		 * case we would read stage #2 (ours).
+		 */
+		int i;
+		for (i = -pos - 1;
+		     (pos < 0 && i < istate->cache_nr &&
+		      !strcmp(istate->cache[i]->name, path));
+		     i++)
+			if (ce_stage(istate->cache[i]) == 2)
+				pos = i;
+	}
+	if (pos < 0)
+		return 0;
+	data = read_sha1_file(istate->cache[pos]->sha1, &type, &sz);
+	if (!data || type != OBJ_BLOB) {
+		free(data);
+		return 0;
+	}
+
+	has_cr = memchr(data, '\r', sz) != NULL;
+	free(data);
+	return has_cr;
+}
+
 static int crlf_to_git(const char *path, const char *src, size_t len,
-                       struct strbuf *buf, int action, enum safe_crlf checksafe)
+		       struct strbuf *buf, enum action action, enum safe_crlf checksafe)
 {
 	struct text_stat stats;
 	char *dst;
 
-	if ((action == CRLF_BINARY) || !auto_crlf || !len)
+	if (action == CRLF_BINARY ||
+	    (action == CRLF_GUESS && auto_crlf == AUTO_CRLF_FALSE) || !len)
 		return 0;
 
 	gather_stats(src, len, &stats);
 
-	if (action == CRLF_GUESS) {
+	if (action == CRLF_AUTO || action == CRLF_GUESS) {
 		/*
 		 * We're currently not going to even try to convert stuff
 		 * that has bare CR characters. Does anybody do that crazy
@@ -145,6 +211,15 @@
 		 */
 		if (is_binary(len, &stats))
 			return 0;
+
+		if (action == CRLF_GUESS) {
+			/*
+			 * If the file in the index has any CR in it, do not convert.
+			 * This is the new safer autocrlf handling.
+			 */
+			if (has_cr_in_index(path))
+				return 0;
+		}
 	}
 
 	check_safe_crlf(path, action, &stats, checksafe);
@@ -157,7 +232,7 @@
 	if (strbuf_avail(buf) + buf->len < len)
 		strbuf_grow(buf, len - buf->len);
 	dst = buf->buf;
-	if (action == CRLF_GUESS) {
+	if (action == CRLF_AUTO || action == CRLF_GUESS) {
 		/*
 		 * If we guessed, we already know we rejected a file with
 		 * lone CR, and we can strip a CR without looking at what
@@ -180,16 +255,12 @@
 }
 
 static int crlf_to_worktree(const char *path, const char *src, size_t len,
-                            struct strbuf *buf, int action)
+			    struct strbuf *buf, enum action action)
 {
 	char *to_free = NULL;
 	struct text_stat stats;
 
-	if ((action == CRLF_BINARY) || (action == CRLF_INPUT) ||
-	    auto_crlf <= 0)
-		return 0;
-
-	if (!len)
+	if (!len || determine_output_conversion(action) != EOL_CRLF)
 		return 0;
 
 	gather_stats(src, len, &stats);
@@ -202,7 +273,14 @@
 	if (stats.lf == stats.crlf)
 		return 0;
 
-	if (action == CRLF_GUESS) {
+	if (action == CRLF_AUTO || action == CRLF_GUESS) {
+		if (action == CRLF_GUESS) {
+			/* If we have any CR or CRLF line endings, we do not touch it */
+			/* This is the new safer autocrlf-handling */
+			if (stats.cr > 0 || stats.crlf > 0)
+				return 0;
+		}
+
 		/* If we have any bare CR characters, we're not going to touch it */
 		if (stats.cr != stats.crlf)
 			return 0;
@@ -249,7 +327,9 @@
 	struct child_process child_process;
 	struct filter_params *params = (struct filter_params *)data;
 	int write_err, status;
-	const char *argv[] = { params->cmd, NULL };
+	const char *argv[] = { NULL, NULL };
+
+	argv[0] = params->cmd;
 
 	memset(&child_process, 0, sizeof(child_process));
 	child_process.argv = argv;
@@ -374,12 +454,16 @@
 
 static void setup_convert_check(struct git_attr_check *check)
 {
+	static struct git_attr *attr_text;
 	static struct git_attr *attr_crlf;
+	static struct git_attr *attr_eol;
 	static struct git_attr *attr_ident;
 	static struct git_attr *attr_filter;
 
-	if (!attr_crlf) {
+	if (!attr_text) {
+		attr_text = git_attr("text");
 		attr_crlf = git_attr("crlf");
+		attr_eol = git_attr("eol");
 		attr_ident = git_attr("ident");
 		attr_filter = git_attr("filter");
 		user_convert_tail = &user_convert;
@@ -388,6 +472,8 @@
 	check[0].attr = attr_crlf;
 	check[1].attr = attr_ident;
 	check[2].attr = attr_filter;
+	check[3].attr = attr_eol;
+	check[4].attr = attr_text;
 }
 
 static int count_ident(const char *cp, unsigned long size)
@@ -568,9 +654,24 @@
 		;
 	else if (!strcmp(value, "input"))
 		return CRLF_INPUT;
+	else if (!strcmp(value, "auto"))
+		return CRLF_AUTO;
 	return CRLF_GUESS;
 }
 
+static int git_path_check_eol(const char *path, struct git_attr_check *check)
+{
+	const char *value = check->value;
+
+	if (ATTR_UNSET(value))
+		;
+	else if (!strcmp(value, "lf"))
+		return EOL_LF;
+	else if (!strcmp(value, "crlf"))
+		return EOL_CRLF;
+	return EOL_UNSET;
+}
+
 static struct convert_driver *git_path_check_convert(const char *path,
 					     struct git_attr_check *check)
 {
@@ -592,20 +693,34 @@
 	return !!ATTR_TRUE(value);
 }
 
+enum action determine_action(enum action text_attr, enum eol eol_attr) {
+	if (text_attr == CRLF_BINARY)
+		return CRLF_BINARY;
+	if (eol_attr == EOL_LF)
+		return CRLF_INPUT;
+	if (eol_attr == EOL_CRLF)
+		return CRLF_CRLF;
+	return text_attr;
+}
+
 int convert_to_git(const char *path, const char *src, size_t len,
                    struct strbuf *dst, enum safe_crlf checksafe)
 {
-	struct git_attr_check check[3];
-	int crlf = CRLF_GUESS;
+	struct git_attr_check check[5];
+	enum action action = CRLF_GUESS;
+	enum eol eol_attr = EOL_UNSET;
 	int ident = 0, ret = 0;
 	const char *filter = NULL;
 
 	setup_convert_check(check);
 	if (!git_checkattr(path, ARRAY_SIZE(check), check)) {
 		struct convert_driver *drv;
-		crlf = git_path_check_crlf(path, check + 0);
+		action = git_path_check_crlf(path, check + 4);
+		if (action == CRLF_GUESS)
+			action = git_path_check_crlf(path, check + 0);
 		ident = git_path_check_ident(path, check + 1);
 		drv = git_path_check_convert(path, check + 2);
+		eol_attr = git_path_check_eol(path, check + 3);
 		if (drv && drv->clean)
 			filter = drv->clean;
 	}
@@ -615,7 +730,8 @@
 		src = dst->buf;
 		len = dst->len;
 	}
-	ret |= crlf_to_git(path, src, len, dst, crlf, checksafe);
+	action = determine_action(action, eol_attr);
+	ret |= crlf_to_git(path, src, len, dst, action, checksafe);
 	if (ret) {
 		src = dst->buf;
 		len = dst->len;
@@ -625,17 +741,21 @@
 
 int convert_to_working_tree(const char *path, const char *src, size_t len, struct strbuf *dst)
 {
-	struct git_attr_check check[3];
-	int crlf = CRLF_GUESS;
+	struct git_attr_check check[5];
+	enum action action = CRLF_GUESS;
+	enum eol eol_attr = EOL_UNSET;
 	int ident = 0, ret = 0;
 	const char *filter = NULL;
 
 	setup_convert_check(check);
 	if (!git_checkattr(path, ARRAY_SIZE(check), check)) {
 		struct convert_driver *drv;
-		crlf = git_path_check_crlf(path, check + 0);
+		action = git_path_check_crlf(path, check + 4);
+		if (action == CRLF_GUESS)
+			action = git_path_check_crlf(path, check + 0);
 		ident = git_path_check_ident(path, check + 1);
 		drv = git_path_check_convert(path, check + 2);
+		eol_attr = git_path_check_eol(path, check + 3);
 		if (drv && drv->smudge)
 			filter = drv->smudge;
 	}
@@ -645,7 +765,8 @@
 		src = dst->buf;
 		len = dst->len;
 	}
-	ret |= crlf_to_worktree(path, src, len, dst, crlf);
+	action = determine_action(action, eol_attr);
+	ret |= crlf_to_worktree(path, src, len, dst, action);
 	if (ret) {
 		src = dst->buf;
 		len = dst->len;
diff --git a/ctype.c b/ctype.c
index 7ee64c7..de60027 100644
--- a/ctype.c
+++ b/ctype.c
@@ -10,7 +10,7 @@
 	A = GIT_ALPHA,
 	D = GIT_DIGIT,
 	G = GIT_GLOB_SPECIAL,	/* *, ?, [, \\ */
-	R = GIT_REGEX_SPECIAL,	/* $, (, ), +, ., ^, {, | */
+	R = GIT_REGEX_SPECIAL	/* $, (, ), +, ., ^, {, | */
 };
 
 unsigned char sane_ctype[256] = {
diff --git a/daemon.c b/daemon.c
index a90ab10..e22a2b7 100644
--- a/daemon.c
+++ b/daemon.c
@@ -141,15 +141,14 @@
 	}
 	else if (interpolated_path && saw_extended_args) {
 		struct strbuf expanded_path = STRBUF_INIT;
-		struct strbuf_expand_dict_entry dict[] = {
-			{ "H", hostname },
-			{ "CH", canon_hostname },
-			{ "IP", ip_address },
-			{ "P", tcp_port },
-			{ "D", directory },
-			{ NULL }
-		};
+		struct strbuf_expand_dict_entry dict[6];
 
+		dict[0].placeholder = "H"; dict[0].value = hostname;
+		dict[1].placeholder = "CH"; dict[1].value = canon_hostname;
+		dict[2].placeholder = "IP"; dict[2].value = ip_address;
+		dict[3].placeholder = "P"; dict[3].value = tcp_port;
+		dict[4].placeholder = "D"; dict[4].value = directory;
+		dict[5].placeholder = NULL; dict[5].value = NULL;
 		if (*dir != '/') {
 			/* Allow only absolute */
 			logerror("'%s': Non-absolute path denied (interpolated-path active)", dir);
@@ -343,7 +342,9 @@
 {
 	/* Timeout as string */
 	char timeout_buf[64];
-	const char *argv[] = { "upload-pack", "--strict", timeout_buf, ".", NULL };
+	const char *argv[] = { "upload-pack", "--strict", NULL, ".", NULL };
+
+	argv[2] = timeout_buf;
 
 	snprintf(timeout_buf, sizeof timeout_buf, "--timeout=%u", timeout);
 	return run_service_command(argv);
diff --git a/date.c b/date.c
index 6bae49c..68cdcaa 100644
--- a/date.c
+++ b/date.c
@@ -586,11 +586,17 @@
 
 /* Gr. strptime is crap for this; it doesn't have a way to require RFC2822
    (i.e. English) day/month names, and it doesn't work correctly with %z. */
-int parse_date(const char *date, char *result, int maxlen)
+int parse_date_toffset(const char *date, unsigned long *timestamp, int *offset)
 {
 	struct tm tm;
-	int offset, tm_gmt;
-	time_t then;
+	int tm_gmt;
+	unsigned long dummy_timestamp;
+	int dummy_offset;
+
+	if (!timestamp)
+		timestamp = &dummy_timestamp;
+	if (!offset)
+		offset = &dummy_offset;
 
 	memset(&tm, 0, sizeof(tm));
 	tm.tm_year = -1;
@@ -600,7 +606,7 @@
 	tm.tm_hour = -1;
 	tm.tm_min = -1;
 	tm.tm_sec = -1;
-	offset = -1;
+	*offset = -1;
 	tm_gmt = 0;
 
 	for (;;) {
@@ -612,11 +618,11 @@
 			break;
 
 		if (isalpha(c))
-			match = match_alpha(date, &tm, &offset);
+			match = match_alpha(date, &tm, offset);
 		else if (isdigit(c))
-			match = match_digit(date, &tm, &offset, &tm_gmt);
+			match = match_digit(date, &tm, offset, &tm_gmt);
 		else if ((c == '-' || c == '+') && isdigit(date[1]))
-			match = match_tz(date, &offset);
+			match = match_tz(date, offset);
 
 		if (!match) {
 			/* BAD CRAP */
@@ -627,16 +633,26 @@
 	}
 
 	/* mktime uses local timezone */
-	then = tm_to_time_t(&tm);
-	if (offset == -1)
-		offset = (then - mktime(&tm)) / 60;
+	*timestamp = tm_to_time_t(&tm);
+	if (*offset == -1)
+		*offset = (*timestamp - mktime(&tm)) / 60;
 
-	if (then == -1)
+	if (*timestamp == -1)
 		return -1;
 
 	if (!tm_gmt)
-		then -= offset * 60;
-	return date_string(then, offset, result, maxlen);
+		*timestamp -= *offset * 60;
+	return 1; /* success */
+}
+
+int parse_date(const char *date, char *result, int maxlen)
+{
+	unsigned long timestamp;
+	int offset;
+	if (parse_date_toffset(date, &timestamp, &offset) > 0)
+		return date_string(timestamp, offset, result, maxlen);
+	else
+		return -1;
 }
 
 enum date_mode parse_date_format(const char *format)
@@ -984,11 +1000,12 @@
 
 unsigned long approxidate_relative(const char *date, const struct timeval *tv)
 {
-	char buffer[50];
+	unsigned long timestamp;
+	int offset;
 	int errors = 0;
 
-	if (parse_date(date, buffer, sizeof(buffer)) > 0)
-		return strtoul(buffer, NULL, 0);
+	if (parse_date_toffset(date, &timestamp, &offset) > 0)
+		return timestamp;
 
 	return approxidate_str(date, tv, &errors);
 }
@@ -996,14 +1013,15 @@
 unsigned long approxidate_careful(const char *date, int *error_ret)
 {
 	struct timeval tv;
-	char buffer[50];
+	unsigned long timestamp;
+	int offset;
 	int dummy = 0;
 	if (!error_ret)
 		error_ret = &dummy;
 
-	if (parse_date(date, buffer, sizeof(buffer)) > 0) {
+	if (parse_date_toffset(date, &timestamp, &offset) > 0) {
 		*error_ret = 0;
-		return strtoul(buffer, NULL, 0);
+		return timestamp;
 	}
 
 	gettimeofday(&tv, NULL);
diff --git a/diff-lib.c b/diff-lib.c
index c9f6e05..8b8978ae 100644
--- a/diff-lib.c
+++ b/diff-lib.c
@@ -70,6 +70,7 @@
 	int changed = ce_match_stat(ce, st, ce_option);
 	if (S_ISGITLINK(ce->ce_mode)
 	    && !DIFF_OPT_TST(diffopt, IGNORE_SUBMODULES)
+	    && !DIFF_OPT_TST(diffopt, IGNORE_DIRTY_SUBMODULES)
 	    && (!changed || DIFF_OPT_TST(diffopt, DIRTY_SUBMODULES))) {
 		*dirty_submodule = is_submodule_modified(ce->name, DIFF_OPT_TST(diffopt, IGNORE_UNTRACKED_IN_SUBMODULES));
 	}
diff --git a/diff-no-index.c b/diff-no-index.c
index 4cd9dac..43aeeba 100644
--- a/diff-no-index.c
+++ b/diff-no-index.c
@@ -26,7 +26,7 @@
 
 	while ((e = readdir(dir)))
 		if (strcmp(".", e->d_name) && strcmp("..", e->d_name))
-			string_list_insert(e->d_name, list);
+			string_list_insert(list, e->d_name);
 
 	closedir(dir);
 	return 0;
diff --git a/diff.c b/diff.c
index 2327cea..3aa695d 100644
--- a/diff.c
+++ b/diff.c
@@ -44,10 +44,6 @@
 	GIT_COLOR_NORMAL,	/* FUNCINFO */
 };
 
-static void diff_filespec_load_driver(struct diff_filespec *one);
-static size_t fill_textconv(struct userdiff_driver *driver,
-			    struct diff_filespec *df, char **outbuf);
-
 static int parse_diff_color_slot(const char *var, int ofs)
 {
 	if (!strcasecmp(var+ofs, "plain"))
@@ -1810,7 +1806,7 @@
 		options->b_prefix = b;
 }
 
-static struct userdiff_driver *get_textconv(struct diff_filespec *one)
+struct userdiff_driver *get_textconv(struct diff_filespec *one)
 {
 	if (!DIFF_FILE_VALID(one))
 		return NULL;
@@ -2620,7 +2616,6 @@
 		}
 		/* fallthru */
 	default:
-		/* nothing */
 		*must_show_header = 0;
 	}
 	if (one && two && hashcmp(one->sha1, two->sha1)) {
@@ -3173,7 +3168,9 @@
 	else if (!strcmp(arg, "--no-textconv"))
 		DIFF_OPT_CLR(options, ALLOW_TEXTCONV);
 	else if (!strcmp(arg, "--ignore-submodules"))
-		DIFF_OPT_SET(options, IGNORE_SUBMODULES);
+		handle_ignore_submodules_arg(options, "all");
+	else if (!prefixcmp(arg, "--ignore-submodules="))
+		handle_ignore_submodules_arg(options, arg + 20);
 	else if (!strcmp(arg, "--submodule"))
 		DIFF_OPT_SET(options, SUBMODULE_LOG);
 	else if (!prefixcmp(arg, "--submodule=")) {
@@ -4244,9 +4241,9 @@
 	return strbuf_detach(&buf, outsize);
 }
 
-static size_t fill_textconv(struct userdiff_driver *driver,
-			    struct diff_filespec *df,
-			    char **outbuf)
+size_t fill_textconv(struct userdiff_driver *driver,
+		     struct diff_filespec *df,
+		     char **outbuf)
 {
 	size_t size;
 
diff --git a/diff.h b/diff.h
index b4eefa7..063d10a 100644
--- a/diff.h
+++ b/diff.h
@@ -10,6 +10,8 @@
 struct diff_options;
 struct diff_queue_struct;
 struct strbuf;
+struct diff_filespec;
+struct userdiff_driver;
 
 typedef void (*change_fn_t)(struct diff_options *options,
 		 unsigned old_mode, unsigned new_mode,
@@ -74,6 +76,7 @@
 #define DIFF_OPT_SUBMODULE_LOG       (1 << 23)
 #define DIFF_OPT_DIRTY_SUBMODULES    (1 << 24)
 #define DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES (1 << 25)
+#define DIFF_OPT_IGNORE_DIRTY_SUBMODULES (1 << 26)
 
 #define DIFF_OPT_TST(opts, flag)    ((opts)->flags & DIFF_OPT_##flag)
 #define DIFF_OPT_SET(opts, flag)    ((opts)->flags |= DIFF_OPT_##flag)
@@ -146,7 +149,7 @@
 	DIFF_FILE_NEW = 5,
 	DIFF_COMMIT = 6,
 	DIFF_WHITESPACE = 7,
-	DIFF_FUNCINFO = 8,
+	DIFF_FUNCINFO = 8
 };
 const char *diff_get_color(int diff_use_color, enum color_diff ix);
 #define diff_get_color_opt(o, ix) \
@@ -292,4 +295,10 @@
 
 extern int index_differs_from(const char *def, int diff_flags);
 
+extern size_t fill_textconv(struct userdiff_driver *driver,
+			    struct diff_filespec *df,
+			    char **outbuf);
+
+extern struct userdiff_driver *get_textconv(struct diff_filespec *one);
+
 #endif /* DIFF_H */
diff --git a/dir.c b/dir.c
index 5615f33..151ea67 100644
--- a/dir.c
+++ b/dir.c
@@ -31,22 +31,22 @@
 	if (!slash)
 		return 0;
 
+	/*
+	 * The first 'prefix' characters of 'path' are common leading
+	 * path components among the pathspecs we have seen so far,
+	 * including the trailing slash.
+	 */
 	prefix = slash - path + 1;
 	while ((next = *++pathspec) != NULL) {
-		int len = strlen(next);
-		if (len >= prefix && !memcmp(path, next, prefix))
+		int len, last_matching_slash = -1;
+		for (len = 0; len < prefix && next[len] == path[len]; len++)
+			if (next[len] == '/')
+				last_matching_slash = len;
+		if (len == prefix)
 			continue;
-		len = prefix - 1;
-		for (;;) {
-			if (!len)
-				return 0;
-			if (next[--len] != '/')
-				continue;
-			if (memcmp(path, next, len+1))
-				continue;
-			prefix = len + 1;
-			break;
-		}
+		if (last_matching_slash < 0)
+			return 0;
+		prefix = last_matching_slash + 1;
 	}
 	return prefix;
 }
@@ -465,7 +465,7 @@
 enum exist_status {
 	index_nonexistent = 0,
 	index_directory,
-	index_gitdir,
+	index_gitdir
 };
 
 /*
@@ -533,7 +533,7 @@
 enum directory_treatment {
 	show_directory,
 	ignore_directory,
-	recurse_into_directory,
+	recurse_into_directory
 };
 
 static enum directory_treatment treat_directory(struct dir_struct *dir,
@@ -684,7 +684,7 @@
 enum path_treatment {
 	path_ignored,
 	path_handled,
-	path_recurse,
+	path_recurse
 };
 
 static enum path_treatment treat_one_path(struct dir_struct *dir,
diff --git a/environment.c b/environment.c
index 876c5e5..83d38d3 100644
--- a/environment.c
+++ b/environment.c
@@ -38,8 +38,9 @@
 int pager_use_color = 1;
 const char *editor_program;
 const char *excludes_file;
-int auto_crlf = 0;	/* 1: both ways, -1: only when adding git objects */
+enum auto_crlf auto_crlf = AUTO_CRLF_FALSE;
 int read_replace_refs = 1;
+enum eol eol = EOL_UNSET;
 enum safe_crlf safe_crlf = SAFE_CRLF_WARN;
 unsigned whitespace_rule_cfg = WS_DEFAULT_RULE;
 enum branch_track git_branch_track = BRANCH_TRACK_REMOTE;
diff --git a/fast-import.c b/fast-import.c
index 129a786..1e5d66e 100644
--- a/fast-import.c
+++ b/fast-import.c
@@ -267,7 +267,7 @@
 typedef enum {
 	WHENSPEC_RAW = 1,
 	WHENSPEC_RFC2822,
-	WHENSPEC_NOW,
+	WHENSPEC_NOW
 } whenspec_type;
 
 struct recent_command
diff --git a/git-am.sh b/git-am.sh
index ef2d51a..e7f008c 100755
--- a/git-am.sh
+++ b/git-am.sh
@@ -596,7 +596,7 @@
 			echo "To restore the original branch and stop patching run \"$cmdline --abort\"."
 			stop_here $this
 		}
-		rm -f "$dotest/original-commit"
+		rm -f "$dotest/original-commit" "$dotest/author-script"
 		if test -f "$dotest/rebasing" &&
 			commit=$(sed -e 's/^From \([0-9a-f]*\) .*/\1/' \
 				-e q "$dotest/$msgnum") &&
@@ -605,6 +605,7 @@
 			git cat-file commit "$commit" |
 			sed -e '1,/^$/d' >"$dotest/msg-clean"
 			echo "$commit" > "$dotest/original-commit"
+			get_author_ident_from_commit "$commit" > "$dotest/author-script"
 		else
 			{
 				sed -n '/^Subject/ s/Subject: //p' "$dotest/info"
@@ -616,9 +617,14 @@
 		;;
 	esac
 
-	GIT_AUTHOR_NAME="$(sed -n '/^Author/ s/Author: //p' "$dotest/info")"
-	GIT_AUTHOR_EMAIL="$(sed -n '/^Email/ s/Email: //p' "$dotest/info")"
-	GIT_AUTHOR_DATE="$(sed -n '/^Date/ s/Date: //p' "$dotest/info")"
+	if test -f "$dotest/author-script"
+	then
+		eval $(cat "$dotest/author-script")
+	else
+		GIT_AUTHOR_NAME="$(sed -n '/^Author/ s/Author: //p' "$dotest/info")"
+		GIT_AUTHOR_EMAIL="$(sed -n '/^Email/ s/Email: //p' "$dotest/info")"
+		GIT_AUTHOR_DATE="$(sed -n '/^Date/ s/Date: //p' "$dotest/info")"
+	fi
 
 	if test -z "$GIT_AUTHOR_EMAIL"
 	then
diff --git a/git-compat-util.h b/git-compat-util.h
index 81ceb7f..02a73ee 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -200,6 +200,7 @@
 #include "compat/bswap.h"
 
 /* General helper functions */
+extern void vreportf(const char *prefix, const char *err, va_list params);
 extern NORETURN void usage(const char *err);
 extern NORETURN void usagef(const char *err, ...) __attribute__((format (printf, 1, 2)));
 extern NORETURN void die(const char *err, ...) __attribute__((format (printf, 1, 2)));
@@ -224,7 +225,6 @@
 #define PROT_READ 1
 #define PROT_WRITE 2
 #define MAP_PRIVATE 1
-#define MAP_FAILED ((void*)-1)
 #endif
 
 #define mmap git_mmap
@@ -253,6 +253,10 @@
 
 #endif /* NO_MMAP */
 
+#ifndef MAP_FAILED
+#define MAP_FAILED ((void *)-1)
+#endif
+
 #ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
 #define on_disk_bytes(st) ((st).st_size)
 #else
diff --git a/git-cvsserver.perl b/git-cvsserver.perl
index 3833bee..e9f3037 100755
--- a/git-cvsserver.perl
+++ b/git-cvsserver.perl
@@ -2415,15 +2415,20 @@
     if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and
          $cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i )
     {
-        my ($val) = check_attr( "crlf", $path );
-        if ( $val eq "set" )
+        my ($val) = check_attr( "text", $path );
+        if ( $val eq "unspecified" )
         {
-            return "";
+            $val = check_attr( "crlf", $path );
         }
-        elsif ( $val eq "unset" )
+        if ( $val eq "unset" )
         {
             return "-kb"
         }
+        elsif ( check_attr( "eol", $path ) ne "unspecified" ||
+                $val eq "set" || $val eq "input" )
+        {
+            return "";
+        }
         else
         {
             $log->info("Unrecognized check_attr crlf $path : $val");
@@ -2656,9 +2661,12 @@
     );
     my ($str) = @_;
 
-    # This should never happen, the same password format (A) bas been
+    # This should never happen, the same password format (A) has been
     # used by CVS since the beginning of time
-    die "invalid password format $1" unless substr($str, 0, 1) eq 'A';
+    {
+        my $fmt = substr($str, 0, 1);
+        die "invalid password format `$fmt'" unless $fmt eq 'A';
+    }
 
     my @str = unpack "C*", substr($str, 1);
     my $ret = join '', map { chr $SHIFTS[$_] } @str;
diff --git a/git-merge-one-file.sh b/git-merge-one-file.sh
index d067894..b86402a 100755
--- a/git-merge-one-file.sh
+++ b/git-merge-one-file.sh
@@ -107,7 +107,7 @@
 		# remove lines that are unique to ours.
 		orig=`git-unpack-file $2`
 		sz0=`wc -c <"$orig"`
-		diff -u -La/$orig -Lb/$orig $orig $src2 | git apply --no-add
+		@@DIFF@@ -u -La/$orig -Lb/$orig $orig $src2 | git apply --no-add
 		sz1=`wc -c <"$orig"`
 
 		# If we do not have enough common material, it is not
diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh
index 436b7f5..6b86abc 100755
--- a/git-rebase--interactive.sh
+++ b/git-rebase--interactive.sh
@@ -974,8 +974,9 @@
 
 		test -d "$REWRITTEN" || test -n "$NEVER_FF" || skip_unnecessary_picks
 
+		output git checkout $ONTO || die_abort "could not detach HEAD"
 		git update-ref ORIG_HEAD $HEAD
-		output git checkout $ONTO && do_rest
+		do_rest
 		;;
 	esac
 	shift
diff --git a/git-remote-testgit.py b/git-remote-testgit.py
index 9253922..df9d512 100644
--- a/git-remote-testgit.py
+++ b/git-remote-testgit.py
@@ -1,6 +1,12 @@
 #!/usr/bin/env python
 
-import hashlib
+# hashlib is only available in python >= 2.5
+try:
+    import hashlib
+    _digest = hashlib.sha1
+except ImportError:
+    import sha
+    _digest = sha.new
 import sys
 import os
 sys.path.insert(0, os.getenv("GITPYTHONLIB","."))
@@ -19,7 +25,7 @@
     repo.get_revs()
     repo.get_head()
 
-    hasher = hashlib.sha1()
+    hasher = _digest()
     hasher.update(repo.path)
     repo.hash = hasher.hexdigest()
 
@@ -133,7 +139,10 @@
 
     path = os.path.join(dirname, 'testgit.marks')
     print path
-    print path if os.path.exists(path) else ""
+    if os.path.exists(path):
+        print path
+    else:
+        print ""
     sys.stdout.flush()
 
     update_local_repo(repo)
diff --git a/git-request-pull.sh b/git-request-pull.sh
index 74238b0..6fdea39 100755
--- a/git-request-pull.sh
+++ b/git-request-pull.sh
@@ -1,4 +1,4 @@
-#!/bin/sh -e
+#!/bin/sh
 # Copyright 2005, Ryan Anderson <ryan@michonline.com>
 #
 # This file is licensed under the GPL v2, or a later version
@@ -70,10 +70,10 @@
 
   %s (%ci)
 
-are available in the git repository at:' $baserev
-echo "  $url $branch"
-echo
+are available in the git repository at:' $baserev &&
+echo "  $url $branch" &&
+echo &&
 
-git shortlog ^$baserev $headrev
-git diff -M --stat --summary $patch $merge_base..$headrev
+git shortlog ^$baserev $headrev &&
+git diff -M --stat --summary $patch $merge_base..$headrev || exit
 exit $status
diff --git a/git-send-email.perl b/git-send-email.perl
index 111c981..6dab3bf 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -54,6 +54,7 @@
     --in-reply-to           <str>  * Email "In-Reply-To:"
     --annotate                     * Review each patch that will be sent in an editor.
     --compose                      * Open an editor for introduction.
+    --8bit-encoding         <str>  * Encoding to assume 8bit mails if undeclared
 
   Sending:
     --envelope-sender       <str>  * Email envelope sender.
@@ -191,6 +192,7 @@
 my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts, $smtp_domain);
 my ($validate, $confirm);
 my (@suppress_cc);
+my ($auto_8bit_encoding);
 
 my ($debug_net_smtp) = 0;		# Net::SMTP, see send_message()
 
@@ -222,6 +224,7 @@
     "multiedit" => \$multiedit,
     "confirm"   => \$confirm,
     "from" => \$sender,
+    "assume8bitencoding" => \$auto_8bit_encoding,
 );
 
 # Help users prepare for 1.7.0
@@ -297,6 +300,7 @@
 		    "thread!" => \$thread,
 		    "validate!" => \$validate,
 		    "format-patch!" => \$format_patch,
+		    "8bit-encoding=s" => \$auto_8bit_encoding,
 	 );
 
 unless ($rc) {
@@ -669,6 +673,35 @@
 	return undef;
 }
 
+my %broken_encoding;
+
+sub file_declares_8bit_cte($) {
+	my $fn = shift;
+	open (my $fh, '<', $fn);
+	while (my $line = <$fh>) {
+		last if ($line =~ /^$/);
+		return 1 if ($line =~ /^Content-Transfer-Encoding: .*8bit.*$/);
+	}
+	close $fh;
+	return 0;
+}
+
+foreach my $f (@files) {
+	next unless (body_or_subject_has_nonascii($f)
+		     && !file_declares_8bit_cte($f));
+	$broken_encoding{$f} = 1;
+}
+
+if (!defined $auto_8bit_encoding && scalar %broken_encoding) {
+	print "The following files are 8bit, but do not declare " .
+		"a Content-Transfer-Encoding.\n";
+	foreach my $f (sort keys %broken_encoding) {
+		print "    $f\n";
+	}
+	$auto_8bit_encoding = ask("Which 8bit encoding should I declare [UTF-8]? ",
+				  default => "UTF-8");
+}
+
 my $prompting = 0;
 if (!defined $sender) {
 	$sender = $repoauthor || $repocommitter || '';
@@ -1221,6 +1254,18 @@
 			or die "(cc-cmd) failed to close pipe to '$cc_cmd'";
 	}
 
+	if ($broken_encoding{$t} && !$has_content_type) {
+		$has_content_type = 1;
+		push @xh, "MIME-Version: 1.0",
+			"Content-Type: text/plain; charset=$auto_8bit_encoding",
+			"Content-Transfer-Encoding: 8bit";
+		$body_encoding = $auto_8bit_encoding;
+	}
+
+	if ($broken_encoding{$t} && !is_rfc2047_quoted($subject)) {
+		$subject = quote_rfc2047($subject, $auto_8bit_encoding);
+	}
+
 	if (defined $author and $author ne $sender) {
 		$message = "From: $author\n\n$message";
 		if (defined $author_encoding) {
@@ -1233,6 +1278,7 @@
 				}
 			}
 			else {
+				$has_content_type = 1;
 				push @xh,
 				  'MIME-Version: 1.0',
 				  "Content-Type: text/plain; charset=$author_encoding",
@@ -1310,3 +1356,17 @@
 	}
 	return 0;
 }
+
+sub body_or_subject_has_nonascii {
+	my $fn = shift;
+	open(my $fh, '<', $fn)
+		or die "unable to open $fn: $!\n";
+	while (my $line = <$fh>) {
+		last if $line =~ /^$/;
+		return 1 if $line =~ /^Subject.*[^[:ascii:]]/;
+	}
+	while (my $line = <$fh>) {
+		return 1 if $line =~ /[^[:ascii:]]/;
+	}
+	return 0;
+}
diff --git a/git-submodule.sh b/git-submodule.sh
index 8c562a7..d9950c2 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -580,7 +580,7 @@
 
 	cd_to_toplevel
 	# Get modified modules cared by user
-	modules=$(git $diff_cmd $cached --raw $head -- "$@" |
+	modules=$(git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- "$@" |
 		sane_egrep '^:([0-7]* )?160000' |
 		while read mod_src mod_dst sha1_src sha1_dst status name
 		do
@@ -594,7 +594,7 @@
 
 	test -z "$modules" && return
 
-	git $diff_cmd $cached --raw $head -- $modules |
+	git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- $modules |
 	sane_egrep '^:([0-7]* )?160000' |
 	cut -c2- |
 	while read mod_src mod_dst sha1_src sha1_dst status name
@@ -760,7 +760,7 @@
 			continue;
 		fi
 		set_name_rev "$path" "$sha1"
-		if git diff-files --quiet -- "$path"
+		if git diff-files --ignore-submodules=dirty --quiet -- "$path"
 		then
 			say " $sha1 $displaypath$revname"
 		else
diff --git a/git.c b/git.c
index 99f0363..265fa09 100644
--- a/git.c
+++ b/git.c
@@ -329,7 +329,7 @@
 		{ "fsck-objects", cmd_fsck, RUN_SETUP },
 		{ "gc", cmd_gc, RUN_SETUP },
 		{ "get-tar-commit-id", cmd_get_tar_commit_id },
-		{ "grep", cmd_grep, USE_PAGER },
+		{ "grep", cmd_grep },
 		{ "hash-object", cmd_hash_object },
 		{ "help", cmd_help },
 		{ "index-pack", cmd_index_pack },
diff --git a/git_remote_helpers/git/exporter.py b/git_remote_helpers/git/exporter.py
index dfaab00..f40f9d6 100644
--- a/git_remote_helpers/git/exporter.py
+++ b/git_remote_helpers/git/exporter.py
@@ -48,4 +48,6 @@
 
         args = ["sed", "s_refs/heads/_" + self.repo.prefix + "_g"]
 
-        subprocess.check_call(args, stdin=p1.stdout)
+        child = subprocess.Popen(args, stdin=p1.stdout)
+        if child.wait() != 0:
+            raise CalledProcessError
diff --git a/git_remote_helpers/git/importer.py b/git_remote_helpers/git/importer.py
index af2919d..70a7127 100644
--- a/git_remote_helpers/git/importer.py
+++ b/git_remote_helpers/git/importer.py
@@ -35,4 +35,6 @@
         if os.path.exists(path):
             args.append("--import-marks=" + path)
 
-        subprocess.check_call(args)
+        child = subprocess.Popen(args)
+        if child.wait() != 0:
+            raise CalledProcessError
diff --git a/git_remote_helpers/git/non_local.py b/git_remote_helpers/git/non_local.py
index d75ef8f..f27389b 100644
--- a/git_remote_helpers/git/non_local.py
+++ b/git_remote_helpers/git/non_local.py
@@ -29,7 +29,9 @@
         os.makedirs(path)
         args = ["git", "clone", "--bare", "--quiet", self.repo.gitpath, path]
 
-        subprocess.check_call(args)
+        child = subprocess.Popen(args)
+        if child.wait() != 0:
+            raise CalledProcessError
 
         return path
 
@@ -43,10 +45,14 @@
             die("could not find repo at %s", path)
 
         args = ["git", "--git-dir=" + path, "fetch", "--quiet", self.repo.gitpath]
-        subprocess.check_call(args)
+        child = subprocess.Popen(args)
+        if child.wait() != 0:
+            raise CalledProcessError
 
         args = ["git", "--git-dir=" + path, "update-ref", "refs/heads/master", "FETCH_HEAD"]
-        subprocess.check_call(args)
+        child = subprocess.Popen(args)
+        if child.wait() != 0:
+            raise CalledProcessError
 
     def push(self, base):
         """Pushes from the non-local repo to base.
@@ -58,4 +64,6 @@
             die("could not find repo at %s", path)
 
         args = ["git", "--git-dir=" + path, "push", "--quiet", self.repo.gitpath]
-        subprocess.check_call(args)
+        child = subprocess.Popen(args)
+        if child.wait() != 0:
+            raise CalledProcessError
diff --git a/git_remote_helpers/git/repo.py b/git_remote_helpers/git/repo.py
index 82d5f78..58e1cdb 100644
--- a/git_remote_helpers/git/repo.py
+++ b/git_remote_helpers/git/repo.py
@@ -19,7 +19,10 @@
 
     prefixes = ["http", "file", "git"]
 
-    return any(url.startswith(i) for i in prefixes)
+    for prefix in prefixes:
+        if url.startswith(prefix):
+            return True
+    return False
 
 class GitRepo(object):
     """Repo object representing a repo.
@@ -50,7 +53,9 @@
         path = ".cached_revs"
         ofile = open(path, "w")
 
-        subprocess.check_call(args, stdout=ofile)
+        child = subprocess.Popen(args, stdout=ofile)
+        if child.wait() != 0:
+            raise CalledProcessError
         output = open(path).readlines()
         self.revmap = dict(sanitize(i) for i in output)
         if "HEAD" in self.revmap:
diff --git a/gitweb/Makefile b/gitweb/Makefile
index d2584fe..2fb7c2d 100644
--- a/gitweb/Makefile
+++ b/gitweb/Makefile
@@ -103,7 +103,7 @@
 GITWEB_CSS = static/gitweb.min.css
 all:: static/gitweb.min.css
 static/gitweb.min.css: static/gitweb.css GITWEB-BUILD-OPTIONS
-	$(QUIET_GEN)$(CSSMIN) <$ >$@
+	$(QUIET_GEN)$(CSSMIN) <$< >$@
 else
 GITWEB_FILES += static/gitweb.css
 endif
diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl
index 2365311..9446376 100755
--- a/gitweb/gitweb.perl
+++ b/gitweb/gitweb.perl
@@ -28,34 +28,42 @@
 	CGI->compile() if $ENV{'MOD_PERL'};
 }
 
-our $cgi = new CGI;
 our $version = "++GIT_VERSION++";
-our $my_url = $cgi->url();
-our $my_uri = $cgi->url(-absolute => 1);
 
-# Base URL for relative URLs in gitweb ($logo, $favicon, ...),
-# needed and used only for URLs with nonempty PATH_INFO
-our $base_url = $my_url;
+our ($my_url, $my_uri, $base_url, $path_info, $home_link);
+sub evaluate_uri {
+	our $cgi;
 
-# When the script is used as DirectoryIndex, the URL does not contain the name
-# of the script file itself, and $cgi->url() fails to strip PATH_INFO, so we
-# have to do it ourselves. We make $path_info global because it's also used
-# later on.
-#
-# Another issue with the script being the DirectoryIndex is that the resulting
-# $my_url data is not the full script URL: this is good, because we want
-# generated links to keep implying the script name if it wasn't explicitly
-# indicated in the URL we're handling, but it means that $my_url cannot be used
-# as base URL.
-# Therefore, if we needed to strip PATH_INFO, then we know that we have
-# to build the base URL ourselves:
-our $path_info = $ENV{"PATH_INFO"};
-if ($path_info) {
-	if ($my_url =~ s,\Q$path_info\E$,, &&
-	    $my_uri =~ s,\Q$path_info\E$,, &&
-	    defined $ENV{'SCRIPT_NAME'}) {
-		$base_url = $cgi->url(-base => 1) . $ENV{'SCRIPT_NAME'};
+	our $my_url = $cgi->url();
+	our $my_uri = $cgi->url(-absolute => 1);
+
+	# Base URL for relative URLs in gitweb ($logo, $favicon, ...),
+	# needed and used only for URLs with nonempty PATH_INFO
+	our $base_url = $my_url;
+
+	# When the script is used as DirectoryIndex, the URL does not contain the name
+	# of the script file itself, and $cgi->url() fails to strip PATH_INFO, so we
+	# have to do it ourselves. We make $path_info global because it's also used
+	# later on.
+	#
+	# Another issue with the script being the DirectoryIndex is that the resulting
+	# $my_url data is not the full script URL: this is good, because we want
+	# generated links to keep implying the script name if it wasn't explicitly
+	# indicated in the URL we're handling, but it means that $my_url cannot be used
+	# as base URL.
+	# Therefore, if we needed to strip PATH_INFO, then we know that we have
+	# to build the base URL ourselves:
+	our $path_info = $ENV{"PATH_INFO"};
+	if ($path_info) {
+		if ($my_url =~ s,\Q$path_info\E$,, &&
+		    $my_uri =~ s,\Q$path_info\E$,, &&
+		    defined $ENV{'SCRIPT_NAME'}) {
+			$base_url = $cgi->url(-base => 1) . $ENV{'SCRIPT_NAME'};
+		}
 	}
+
+	# target of the home link on top of all pages
+	our $home_link = $my_uri || "/";
 }
 
 # core git executable to use
@@ -70,9 +78,6 @@
 # the number is relative to the projectroot
 our $project_maxdepth = "++GITWEB_PROJECT_MAXDEPTH++";
 
-# target of the home link on top of all pages
-our $home_link = $my_uri || "/";
-
 # string of the home link on top of all pages
 our $home_link_str = "++GITWEB_HOME_LINK_STR++";
 
@@ -566,15 +571,18 @@
 		!$known_snapshot_formats{$_}{'disabled'}} @fmts;
 }
 
-our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++";
-our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++";
-# die if there are errors parsing config file
-if (-e $GITWEB_CONFIG) {
-	do $GITWEB_CONFIG;
-	die $@ if $@;
-} elsif (-e $GITWEB_CONFIG_SYSTEM) {
-	do $GITWEB_CONFIG_SYSTEM;
-	die $@ if $@;
+our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM);
+sub evaluate_gitweb_config {
+	our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++";
+	our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++";
+	# die if there are errors parsing config file
+	if (-e $GITWEB_CONFIG) {
+		do $GITWEB_CONFIG;
+		die $@ if $@;
+	} elsif (-e $GITWEB_CONFIG_SYSTEM) {
+		do $GITWEB_CONFIG_SYSTEM;
+		die $@ if $@;
+	}
 }
 
 # Get loadavg of system, to compare against $maxload.
@@ -600,13 +608,16 @@
 }
 
 # version of the core git binary
-our $git_version = qx("$GIT" --version) =~ m/git version (.*)$/ ? $1 : "unknown";
-$number_of_git_cmds++;
+our $git_version;
+sub evaluate_git_version {
+	our $git_version = qx("$GIT" --version) =~ m/git version (.*)$/ ? $1 : "unknown";
+	$number_of_git_cmds++;
+}
 
-$projects_list ||= $projectroot;
-
-if (defined $maxload && get_loadavg() > $maxload) {
-	die_error(503, "The load average on the server is too high");
+sub check_loadavg {
+	if (defined $maxload && get_loadavg() > $maxload) {
+		die_error(503, "The load average on the server is too high");
+	}
 }
 
 # ======================================================================
@@ -693,11 +704,15 @@
 # should be single values, but opt can be an array. We should probably
 # build an array of parameters that can be multi-valued, but since for the time
 # being it's only this one, we just single it out
-while (my ($name, $symbol) = each %cgi_param_mapping) {
-	if ($symbol eq 'opt') {
-		$input_params{$name} = [ $cgi->param($symbol) ];
-	} else {
-		$input_params{$name} = $cgi->param($symbol);
+sub evaluate_query_params {
+	our $cgi;
+
+	while (my ($name, $symbol) = each %cgi_param_mapping) {
+		if ($symbol eq 'opt') {
+			$input_params{$name} = [ $cgi->param($symbol) ];
+		} else {
+			$input_params{$name} = $cgi->param($symbol);
+		}
 	}
 }
 
@@ -844,125 +859,134 @@
 		}
 	}
 }
-evaluate_path_info();
 
-our $action = $input_params{'action'};
-if (defined $action) {
-	if (!validate_action($action)) {
-		die_error(400, "Invalid action parameter");
+our ($action, $project, $file_name, $file_parent, $hash, $hash_parent, $hash_base,
+     $hash_parent_base, @extra_options, $page, $searchtype, $search_use_regexp,
+     $searchtext, $search_regexp);
+sub evaluate_and_validate_params {
+	our $action = $input_params{'action'};
+	if (defined $action) {
+		if (!validate_action($action)) {
+			die_error(400, "Invalid action parameter");
+		}
 	}
-}
 
-# parameters which are pathnames
-our $project = $input_params{'project'};
-if (defined $project) {
-	if (!validate_project($project)) {
-		undef $project;
-		die_error(404, "No such project");
+	# parameters which are pathnames
+	our $project = $input_params{'project'};
+	if (defined $project) {
+		if (!validate_project($project)) {
+			undef $project;
+			die_error(404, "No such project");
+		}
 	}
-}
 
-our $file_name = $input_params{'file_name'};
-if (defined $file_name) {
-	if (!validate_pathname($file_name)) {
-		die_error(400, "Invalid file parameter");
+	our $file_name = $input_params{'file_name'};
+	if (defined $file_name) {
+		if (!validate_pathname($file_name)) {
+			die_error(400, "Invalid file parameter");
+		}
 	}
-}
 
-our $file_parent = $input_params{'file_parent'};
-if (defined $file_parent) {
-	if (!validate_pathname($file_parent)) {
-		die_error(400, "Invalid file parent parameter");
+	our $file_parent = $input_params{'file_parent'};
+	if (defined $file_parent) {
+		if (!validate_pathname($file_parent)) {
+			die_error(400, "Invalid file parent parameter");
+		}
 	}
-}
 
-# parameters which are refnames
-our $hash = $input_params{'hash'};
-if (defined $hash) {
-	if (!validate_refname($hash)) {
-		die_error(400, "Invalid hash parameter");
+	# parameters which are refnames
+	our $hash = $input_params{'hash'};
+	if (defined $hash) {
+		if (!validate_refname($hash)) {
+			die_error(400, "Invalid hash parameter");
+		}
 	}
-}
 
-our $hash_parent = $input_params{'hash_parent'};
-if (defined $hash_parent) {
-	if (!validate_refname($hash_parent)) {
-		die_error(400, "Invalid hash parent parameter");
+	our $hash_parent = $input_params{'hash_parent'};
+	if (defined $hash_parent) {
+		if (!validate_refname($hash_parent)) {
+			die_error(400, "Invalid hash parent parameter");
+		}
 	}
-}
 
-our $hash_base = $input_params{'hash_base'};
-if (defined $hash_base) {
-	if (!validate_refname($hash_base)) {
-		die_error(400, "Invalid hash base parameter");
+	our $hash_base = $input_params{'hash_base'};
+	if (defined $hash_base) {
+		if (!validate_refname($hash_base)) {
+			die_error(400, "Invalid hash base parameter");
+		}
 	}
-}
 
-our @extra_options = @{$input_params{'extra_options'}};
-# @extra_options is always defined, since it can only be (currently) set from
-# CGI, and $cgi->param() returns the empty array in array context if the param
-# is not set
-foreach my $opt (@extra_options) {
-	if (not exists $allowed_options{$opt}) {
-		die_error(400, "Invalid option parameter");
+	our @extra_options = @{$input_params{'extra_options'}};
+	# @extra_options is always defined, since it can only be (currently) set from
+	# CGI, and $cgi->param() returns the empty array in array context if the param
+	# is not set
+	foreach my $opt (@extra_options) {
+		if (not exists $allowed_options{$opt}) {
+			die_error(400, "Invalid option parameter");
+		}
+		if (not grep(/^$action$/, @{$allowed_options{$opt}})) {
+			die_error(400, "Invalid option parameter for this action");
+		}
 	}
-	if (not grep(/^$action$/, @{$allowed_options{$opt}})) {
-		die_error(400, "Invalid option parameter for this action");
-	}
-}
 
-our $hash_parent_base = $input_params{'hash_parent_base'};
-if (defined $hash_parent_base) {
-	if (!validate_refname($hash_parent_base)) {
-		die_error(400, "Invalid hash parent base parameter");
+	our $hash_parent_base = $input_params{'hash_parent_base'};
+	if (defined $hash_parent_base) {
+		if (!validate_refname($hash_parent_base)) {
+			die_error(400, "Invalid hash parent base parameter");
+		}
 	}
-}
 
-# other parameters
-our $page = $input_params{'page'};
-if (defined $page) {
-	if ($page =~ m/[^0-9]/) {
-		die_error(400, "Invalid page parameter");
+	# other parameters
+	our $page = $input_params{'page'};
+	if (defined $page) {
+		if ($page =~ m/[^0-9]/) {
+			die_error(400, "Invalid page parameter");
+		}
 	}
-}
 
-our $searchtype = $input_params{'searchtype'};
-if (defined $searchtype) {
-	if ($searchtype =~ m/[^a-z]/) {
-		die_error(400, "Invalid searchtype parameter");
+	our $searchtype = $input_params{'searchtype'};
+	if (defined $searchtype) {
+		if ($searchtype =~ m/[^a-z]/) {
+			die_error(400, "Invalid searchtype parameter");
+		}
 	}
-}
 
-our $search_use_regexp = $input_params{'search_use_regexp'};
+	our $search_use_regexp = $input_params{'search_use_regexp'};
 
-our $searchtext = $input_params{'searchtext'};
-our $search_regexp;
-if (defined $searchtext) {
-	if (length($searchtext) < 2) {
-		die_error(403, "At least two characters are required for search parameter");
+	our $searchtext = $input_params{'searchtext'};
+	our $search_regexp;
+	if (defined $searchtext) {
+		if (length($searchtext) < 2) {
+			die_error(403, "At least two characters are required for search parameter");
+		}
+		$search_regexp = $search_use_regexp ? $searchtext : quotemeta $searchtext;
 	}
-	$search_regexp = $search_use_regexp ? $searchtext : quotemeta $searchtext;
 }
 
 # path to the current git repository
 our $git_dir;
-$git_dir = "$projectroot/$project" if $project;
+sub evaluate_git_dir {
+	our $git_dir = "$projectroot/$project" if $project;
+}
 
-# list of supported snapshot formats
-our @snapshot_fmts = gitweb_get_feature('snapshot');
-@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
+our (@snapshot_fmts, $git_avatar);
+sub configure_gitweb_features {
+	# list of supported snapshot formats
+	our @snapshot_fmts = gitweb_get_feature('snapshot');
+	@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
 
-# check that the avatar feature is set to a known provider name,
-# and for each provider check if the dependencies are satisfied.
-# if the provider name is invalid or the dependencies are not met,
-# reset $git_avatar to the empty string.
-our ($git_avatar) = gitweb_get_feature('avatar');
-if ($git_avatar eq 'gravatar') {
-	$git_avatar = '' unless (eval { require Digest::MD5; 1; });
-} elsif ($git_avatar eq 'picon') {
-	# no dependencies
-} else {
-	$git_avatar = '';
+	# check that the avatar feature is set to a known provider name,
+	# and for each provider check if the dependencies are satisfied.
+	# if the provider name is invalid or the dependencies are not met,
+	# reset $git_avatar to the empty string.
+	our ($git_avatar) = gitweb_get_feature('avatar');
+	if ($git_avatar eq 'gravatar') {
+		$git_avatar = '' unless (eval { require Digest::MD5; 1; });
+	} elsif ($git_avatar eq 'picon') {
+		# no dependencies
+	} else {
+		$git_avatar = '';
+	}
 }
 
 # custom error handler: 'die <message>' is Internal Server Error
@@ -981,27 +1005,118 @@
 set_message(\&handle_errors_html);
 
 # dispatch
-if (!defined $action) {
-	if (defined $hash) {
-		$action = git_get_type($hash);
-	} elsif (defined $hash_base && defined $file_name) {
-		$action = git_get_type("$hash_base:$file_name");
-	} elsif (defined $project) {
-		$action = 'summary';
-	} else {
-		$action = 'project_list';
+sub dispatch {
+	if (!defined $action) {
+		if (defined $hash) {
+			$action = git_get_type($hash);
+		} elsif (defined $hash_base && defined $file_name) {
+			$action = git_get_type("$hash_base:$file_name");
+		} elsif (defined $project) {
+			$action = 'summary';
+		} else {
+			$action = 'project_list';
+		}
 	}
+	if (!defined($actions{$action})) {
+		die_error(400, "Unknown action");
+	}
+	if ($action !~ m/^(?:opml|project_list|project_index)$/ &&
+	    !$project) {
+		die_error(400, "Project needed");
+	}
+	$actions{$action}->();
 }
-if (!defined($actions{$action})) {
-	die_error(400, "Unknown action");
+
+sub run_request {
+	our $t0 = [Time::HiRes::gettimeofday()]
+		if defined $t0;
+
+	evaluate_uri();
+	evaluate_gitweb_config();
+	evaluate_git_version();
+	check_loadavg();
+
+	# $projectroot and $projects_list might be set in gitweb config file
+	$projects_list ||= $projectroot;
+
+	evaluate_query_params();
+	evaluate_path_info();
+	evaluate_and_validate_params();
+	evaluate_git_dir();
+
+	configure_gitweb_features();
+
+	dispatch();
 }
-if ($action !~ m/^(?:opml|project_list|project_index)$/ &&
-    !$project) {
-	die_error(400, "Project needed");
+
+our $is_last_request = sub { 1 };
+our ($pre_dispatch_hook, $post_dispatch_hook, $pre_listen_hook);
+our $CGI = 'CGI';
+our $cgi;
+sub configure_as_fcgi {
+	require CGI::Fast;
+	our $CGI = 'CGI::Fast';
+
+	my $request_number = 0;
+	# let each child service 100 requests
+	our $is_last_request = sub { ++$request_number > 100 };
 }
-$actions{$action}->();
-DONE_GITWEB:
-1;
+sub evaluate_argv {
+	my $script_name = $ENV{'SCRIPT_NAME'} || $ENV{'SCRIPT_FILENAME'} || __FILE__;
+	configure_as_fcgi()
+		if $script_name =~ /\.fcgi$/;
+
+	return unless (@ARGV);
+
+	require Getopt::Long;
+	Getopt::Long::GetOptions(
+		'fastcgi|fcgi|f' => \&configure_as_fcgi,
+		'nproc|n=i' => sub {
+			my ($arg, $val) = @_;
+			return unless eval { require FCGI::ProcManager; 1; };
+			my $proc_manager = FCGI::ProcManager->new({
+				n_processes => $val,
+			});
+			our $pre_listen_hook    = sub { $proc_manager->pm_manage()        };
+			our $pre_dispatch_hook  = sub { $proc_manager->pm_pre_dispatch()  };
+			our $post_dispatch_hook = sub { $proc_manager->pm_post_dispatch() };
+		},
+	);
+}
+
+sub run {
+	evaluate_argv();
+
+	$pre_listen_hook->()
+		if $pre_listen_hook;
+
+ REQUEST:
+	while ($cgi = $CGI->new()) {
+		$pre_dispatch_hook->()
+			if $pre_dispatch_hook;
+
+		run_request();
+
+		$pre_dispatch_hook->()
+			if $post_dispatch_hook;
+
+		last REQUEST if ($is_last_request->());
+	}
+
+ DONE_GITWEB:
+	1;
+}
+
+run();
+
+if (defined caller) {
+	# wrapped in a subroutine processing requests,
+	# e.g. mod_perl with ModPerl::Registry, or PSGI with Plack::App::WrapCGI
+	return;
+} else {
+	# pure CGI script, serving single request
+	exit;
+}
 
 ## ======================================================================
 ## action links
diff --git a/grep.h b/grep.h
index 0aebebd..efa8cff 100644
--- a/grep.h
+++ b/grep.h
@@ -10,17 +10,17 @@
 	GREP_OPEN_PAREN,
 	GREP_CLOSE_PAREN,
 	GREP_NOT,
-	GREP_OR,
+	GREP_OR
 };
 
 enum grep_context {
 	GREP_CONTEXT_HEAD,
-	GREP_CONTEXT_BODY,
+	GREP_CONTEXT_BODY
 };
 
 enum grep_header_field {
 	GREP_HEADER_AUTHOR = 0,
-	GREP_HEADER_COMMITTER,
+	GREP_HEADER_COMMITTER
 };
 
 struct grep_pat {
@@ -41,7 +41,7 @@
 	GREP_NODE_ATOM,
 	GREP_NODE_NOT,
 	GREP_NODE_AND,
-	GREP_NODE_OR,
+	GREP_NODE_OR
 };
 
 struct grep_expr {
diff --git a/http-backend.c b/http-backend.c
index f0e787e..14c90c2 100644
--- a/http-backend.c
+++ b/http-backend.c
@@ -37,9 +37,9 @@
 			char *value = url_decode_parameter_value(&query);
 			struct string_list_item *i;
 
-			i = string_list_lookup(name, query_params);
+			i = string_list_lookup(query_params, name);
 			if (!i)
-				i = string_list_insert(name, query_params);
+				i = string_list_insert(query_params, name);
 			else
 				free(i->util);
 			i->util = value;
@@ -51,7 +51,7 @@
 static const char *get_parameter(const char *name)
 {
 	struct string_list_item *i;
-	i = string_list_lookup(name, get_parameters());
+	i = string_list_lookup(get_parameters(), name);
 	return i ? i->util : NULL;
 }
 
@@ -488,14 +488,12 @@
 	static int dead;
 
 	if (!dead) {
-		char buffer[1000];
 		dead = 1;
-
-		vsnprintf(buffer, sizeof(buffer), err, params);
-		fprintf(stderr, "fatal: %s\n", buffer);
 		http_status(500, "Internal Server Error");
 		hdr_nocache();
 		end_headers();
+
+		vreportf("fatal: ", err, params);
 	}
 	exit(0); /* we successfully reported a failure ;-) */
 }
diff --git a/http-push.c b/http-push.c
index 415b1ab..c9bcd11 100644
--- a/http-push.c
+++ b/http-push.c
@@ -105,7 +105,7 @@
 	RUN_PUT,
 	RUN_MOVE,
 	ABORTED,
-	COMPLETE,
+	COMPLETE
 };
 
 struct transfer_request
diff --git a/http-walker.c b/http-walker.c
index 8ca76d0..18bd650 100644
--- a/http-walker.c
+++ b/http-walker.c
@@ -15,7 +15,7 @@
 	WAITING,
 	ABORTED,
 	ACTIVE,
-	COMPLETE,
+	COMPLETE
 };
 
 struct object_request
diff --git a/imap-send.c b/imap-send.c
index 9d0097c..1a577a0 100644
--- a/imap-send.c
+++ b/imap-send.c
@@ -230,7 +230,7 @@
 	LITERALPLUS,
 	NAMESPACE,
 	STARTTLS,
-	AUTH_CRAM_MD5,
+	AUTH_CRAM_MD5
 };
 
 static const char *cap_list[] = {
diff --git a/ll-merge.c b/ll-merge.c
index f9b3d85..3764a1a 100644
--- a/ll-merge.c
+++ b/ll-merge.c
@@ -139,17 +139,17 @@
 {
 	char temp[4][50];
 	struct strbuf cmd = STRBUF_INIT;
-	struct strbuf_expand_dict_entry dict[] = {
-		{ "O", temp[0] },
-		{ "A", temp[1] },
-		{ "B", temp[2] },
-		{ "L", temp[3] },
-		{ NULL }
-	};
+	struct strbuf_expand_dict_entry dict[5];
 	const char *args[] = { NULL, NULL };
 	int status, fd, i;
 	struct stat st;
 
+	dict[0].placeholder = "O"; dict[0].value = temp[0];
+	dict[1].placeholder = "A"; dict[1].value = temp[1];
+	dict[2].placeholder = "B"; dict[2].value = temp[2];
+	dict[3].placeholder = "L"; dict[3].value = temp[3];
+	dict[4].placeholder = NULL; dict[4].value = NULL;
+
 	if (fn->cmdline == NULL)
 		die("custom merge driver %s lacks command line.", fn->name);
 
diff --git a/mailmap.c b/mailmap.c
index b68c1fe..f80b701 100644
--- a/mailmap.c
+++ b/mailmap.c
@@ -69,7 +69,7 @@
 		index = -1 - index;
 	} else {
 		/* create mailmap entry */
-		struct string_list_item *item = string_list_insert_at_index(index, old_email, map);
+		struct string_list_item *item = string_list_insert_at_index(map, index, old_email);
 		item->util = xmalloc(sizeof(struct mailmap_entry));
 		memset(item->util, 0, sizeof(struct mailmap_entry));
 		((struct mailmap_entry *)item->util)->namemap.strdup_strings = 1;
@@ -92,7 +92,7 @@
 			mi->name = xstrdup(new_name);
 		if (new_email)
 			mi->email = xstrdup(new_email);
-		string_list_insert(old_name, &me->namemap)->util = mi;
+		string_list_insert(&me->namemap, old_name)->util = mi;
 	}
 
 	debug_mm("mailmap:  '%s' <%s> -> '%s' <%s>\n",
@@ -214,13 +214,13 @@
 	mailbuf[i] = 0;
 
 	debug_mm("map_user: map '%s' <%s>\n", name, mailbuf);
-	item = string_list_lookup(mailbuf, map);
+	item = string_list_lookup(map, mailbuf);
 	if (item != NULL) {
 		me = (struct mailmap_entry *)item->util;
 		if (me->namemap.nr) {
 			/* The item has multiple items, so we'll look up on name too */
 			/* If the name is not found, we choose the simple entry      */
-			struct string_list_item *subitem = string_list_lookup(name, &me->namemap);
+			struct string_list_item *subitem = string_list_lookup(&me->namemap, name);
 			if (subitem)
 				item = subitem;
 		}
diff --git a/merge-recursive.c b/merge-recursive.c
index 206c103..856e98c 100644
--- a/merge-recursive.c
+++ b/merge-recursive.c
@@ -238,9 +238,9 @@
 	newpath[baselen + len] = '\0';
 
 	if (S_ISDIR(mode))
-		string_list_insert(newpath, &o->current_directory_set);
+		string_list_insert(&o->current_directory_set, newpath);
 	else
-		string_list_insert(newpath, &o->current_file_set);
+		string_list_insert(&o->current_file_set, newpath);
 	free(newpath);
 
 	return (S_ISDIR(mode) ? READ_TREE_RECURSIVE : 0);
@@ -271,7 +271,7 @@
 			e->stages[2].sha, &e->stages[2].mode);
 	get_tree_entry(b->object.sha1, path,
 			e->stages[3].sha, &e->stages[3].mode);
-	item = string_list_insert(path, entries);
+	item = string_list_insert(entries, path);
 	item->util = e;
 	return e;
 }
@@ -294,9 +294,9 @@
 		if (!ce_stage(ce))
 			continue;
 
-		item = string_list_lookup(ce->name, unmerged);
+		item = string_list_lookup(unmerged, ce->name);
 		if (!item) {
-			item = string_list_insert(ce->name, unmerged);
+			item = string_list_insert(unmerged, ce->name);
 			item->util = xcalloc(1, sizeof(struct stage_data));
 		}
 		e = item->util;
@@ -356,20 +356,20 @@
 		re = xmalloc(sizeof(*re));
 		re->processed = 0;
 		re->pair = pair;
-		item = string_list_lookup(re->pair->one->path, entries);
+		item = string_list_lookup(entries, re->pair->one->path);
 		if (!item)
 			re->src_entry = insert_stage_data(re->pair->one->path,
 					o_tree, a_tree, b_tree, entries);
 		else
 			re->src_entry = item->util;
 
-		item = string_list_lookup(re->pair->two->path, entries);
+		item = string_list_lookup(entries, re->pair->two->path);
 		if (!item)
 			re->dst_entry = insert_stage_data(re->pair->two->path,
 					o_tree, a_tree, b_tree, entries);
 		else
 			re->dst_entry = item->util;
-		item = string_list_insert(pair->one->path, renames);
+		item = string_list_insert(renames, pair->one->path);
 		item->util = re;
 	}
 	opts.output_format = DIFF_FORMAT_NO_OUTPUT;
@@ -432,7 +432,7 @@
 	       lstat(newpath, &st) == 0)
 		sprintf(p, "_%d", suffix++);
 
-	string_list_insert(newpath, &o->current_file_set);
+	string_list_insert(&o->current_file_set, newpath);
 	return newpath;
 }
 
@@ -811,12 +811,12 @@
 
 	for (i = 0; i < a_renames->nr; i++) {
 		sre = a_renames->items[i].util;
-		string_list_insert(sre->pair->two->path, &a_by_dst)->util
+		string_list_insert(&a_by_dst, sre->pair->two->path)->util
 			= sre->dst_entry;
 	}
 	for (i = 0; i < b_renames->nr; i++) {
 		sre = b_renames->items[i].util;
-		string_list_insert(sre->pair->two->path, &b_by_dst)->util
+		string_list_insert(&b_by_dst, sre->pair->two->path)->util
 			= sre->dst_entry;
 	}
 
@@ -988,7 +988,7 @@
 					output(o, 1, "Adding as %s instead", new_path);
 					update_file(o, 0, dst_other.sha1, dst_other.mode, new_path);
 				}
-			} else if ((item = string_list_lookup(ren1_dst, renames2Dst))) {
+			} else if ((item = string_list_lookup(renames2Dst, ren1_dst))) {
 				ren2 = item->util;
 				clean_merge = 0;
 				ren2->processed = 1;
diff --git a/merge-recursive.h b/merge-recursive.h
index 0cc465e..b831293 100644
--- a/merge-recursive.h
+++ b/merge-recursive.h
@@ -10,7 +10,7 @@
 	enum {
 		MERGE_RECURSIVE_NORMAL = 0,
 		MERGE_RECURSIVE_OURS,
-		MERGE_RECURSIVE_THEIRS,
+		MERGE_RECURSIVE_THEIRS
 	} recursive_variant;
 	const char *subtree_shift;
 	unsigned buffer_output : 1;
diff --git a/notes.c b/notes.c
index 6ee04e7..1978244 100644
--- a/notes.c
+++ b/notes.c
@@ -716,7 +716,7 @@
 		struct write_each_note_data *d)
 {
 	struct non_note *n = d->next_non_note;
-	int cmp, ret;
+	int cmp = 0, ret;
 	while (n && (!note_path || (cmp = strcmp(n->path, note_path)) <= 0)) {
 		if (note_path && cmp == 0)
 			; /* do nothing, prefer note to non-note */
@@ -838,7 +838,7 @@
 {
 	struct string_list *refs = cb;
 	if (!unsorted_string_list_has_string(refs, path))
-		string_list_append(path, refs);
+		string_list_append(refs, path);
 	return 0;
 }
 
@@ -851,7 +851,7 @@
 		if (get_sha1(glob, sha1))
 			warning("notes ref %s is invalid", glob);
 		if (!unsorted_string_list_has_string(list, glob))
-			string_list_append(glob, list);
+			string_list_append(list, glob);
 	}
 }
 
@@ -969,7 +969,7 @@
 	trees = xmalloc((refs->nr+1) * sizeof(struct notes_tree *));
 	cb_data.counter = 0;
 	cb_data.trees = trees;
-	for_each_string_list(load_one_display_note_ref, refs, &cb_data);
+	for_each_string_list(refs, load_one_display_note_ref, &cb_data);
 	trees[cb_data.counter] = NULL;
 	return trees;
 }
@@ -983,7 +983,7 @@
 	assert(!display_notes_trees);
 
 	if (!opt || !opt->suppress_default_notes) {
-		string_list_append(default_notes_ref(), &display_notes_refs);
+		string_list_append(&display_notes_refs, default_notes_ref());
 		display_ref_env = getenv(GIT_NOTES_DISPLAY_REF_ENVIRONMENT);
 		if (display_ref_env) {
 			string_list_add_refs_from_colon_sep(&display_notes_refs,
@@ -996,8 +996,8 @@
 	git_config(notes_display_config, &load_config_refs);
 
 	if (opt && opt->extra_notes_refs)
-		for_each_string_list(string_list_add_refs_from_list,
-				     opt->extra_notes_refs,
+		for_each_string_list(opt->extra_notes_refs,
+				     string_list_add_refs_from_list,
 				     &display_notes_refs);
 
 	display_notes_trees = load_notes_trees(&display_notes_refs);
diff --git a/notes.h b/notes.h
index cc2dff2..65fc3a6 100644
--- a/notes.h
+++ b/notes.h
@@ -18,7 +18,7 @@
  * combine_notes_concatenate(), which appends the contents of the new note to
  * the contents of the existing note.
  */
-typedef int combine_notes_fn(unsigned char *cur_sha1, const unsigned char *new_sha1);
+typedef int (*combine_notes_fn)(unsigned char *cur_sha1, const unsigned char *new_sha1);
 
 /* Common notes combinators */
 int combine_notes_concatenate(unsigned char *cur_sha1, const unsigned char *new_sha1);
@@ -38,7 +38,7 @@
 	struct int_node *root;
 	struct non_note *first_non_note, *prev_non_note;
 	char *ref;
-	combine_notes_fn *combine_notes;
+	combine_notes_fn combine_notes;
 	int initialized;
 	int dirty;
 } default_notes_tree;
diff --git a/parse-options.c b/parse-options.c
index 8546d85..0fa79bc 100644
--- a/parse-options.c
+++ b/parse-options.c
@@ -4,8 +4,9 @@
 #include "commit.h"
 #include "color.h"
 
-static int parse_options_usage(const char * const *usagestr,
-			       const struct option *opts);
+static int parse_options_usage(struct parse_opt_ctx_t *ctx,
+			       const char * const *usagestr,
+			       const struct option *opts, int err);
 
 #define OPT_SHORT 1
 #define OPT_UNSET 2
@@ -351,8 +352,9 @@
 		die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together");
 }
 
-static int usage_with_options_internal(const char * const *,
-				       const struct option *, int);
+static int usage_with_options_internal(struct parse_opt_ctx_t *,
+				       const char * const *,
+				       const struct option *, int, int);
 
 int parse_options_step(struct parse_opt_ctx_t *ctx,
 		       const struct option *options,
@@ -380,10 +382,10 @@
 		if (arg[1] != '-') {
 			ctx->opt = arg + 1;
 			if (internal_help && *ctx->opt == 'h')
-				return parse_options_usage(usagestr, options);
+				return parse_options_usage(ctx, usagestr, options, 0);
 			switch (parse_short_opt(ctx, options)) {
 			case -1:
-				return parse_options_usage(usagestr, options);
+				return parse_options_usage(ctx, usagestr, options, 1);
 			case -2:
 				goto unknown;
 			}
@@ -391,10 +393,10 @@
 				check_typos(arg + 1, options);
 			while (ctx->opt) {
 				if (internal_help && *ctx->opt == 'h')
-					return parse_options_usage(usagestr, options);
+					return parse_options_usage(ctx, usagestr, options, 0);
 				switch (parse_short_opt(ctx, options)) {
 				case -1:
-					return parse_options_usage(usagestr, options);
+					return parse_options_usage(ctx, usagestr, options, 1);
 				case -2:
 					/* fake a short option thing to hide the fact that we may have
 					 * started to parse aggregated stuff
@@ -418,12 +420,12 @@
 		}
 
 		if (internal_help && !strcmp(arg + 2, "help-all"))
-			return usage_with_options_internal(usagestr, options, 1);
+			return usage_with_options_internal(ctx, usagestr, options, 1, 0);
 		if (internal_help && !strcmp(arg + 2, "help"))
-			return parse_options_usage(usagestr, options);
+			return parse_options_usage(ctx, usagestr, options, 0);
 		switch (parse_long_opt(ctx, arg + 2, options)) {
 		case -1:
-			return parse_options_usage(usagestr, options);
+			return parse_options_usage(ctx, usagestr, options, 1);
 		case -2:
 			goto unknown;
 		}
@@ -468,7 +470,7 @@
 	return parse_options_end(&ctx);
 }
 
-static int usage_argh(const struct option *opts)
+static int usage_argh(const struct option *opts, FILE *outfile)
 {
 	const char *s;
 	int literal = (opts->flags & PARSE_OPT_LITERAL_ARGHELP) || !opts->argh;
@@ -479,72 +481,81 @@
 			s = literal ? "[%s]" : "[<%s>]";
 	else
 		s = literal ? " %s" : " <%s>";
-	return fprintf(stderr, s, opts->argh ? opts->argh : "...");
+	return fprintf(outfile, s, opts->argh ? opts->argh : "...");
 }
 
 #define USAGE_OPTS_WIDTH 24
 #define USAGE_GAP         2
 
-static int usage_with_options_internal(const char * const *usagestr,
-				const struct option *opts, int full)
+static int usage_with_options_internal(struct parse_opt_ctx_t *ctx,
+				       const char * const *usagestr,
+				       const struct option *opts, int full, int err)
 {
+	FILE *outfile = err ? stderr : stdout;
+
 	if (!usagestr)
 		return PARSE_OPT_HELP;
 
-	fprintf(stderr, "usage: %s\n", *usagestr++);
+	if (!err && ctx && ctx->flags & PARSE_OPT_SHELL_EVAL)
+		fprintf(outfile, "cat <<\\EOF\n");
+
+	fprintf(outfile, "usage: %s\n", *usagestr++);
 	while (*usagestr && **usagestr)
-		fprintf(stderr, "   or: %s\n", *usagestr++);
+		fprintf(outfile, "   or: %s\n", *usagestr++);
 	while (*usagestr) {
-		fprintf(stderr, "%s%s\n",
+		fprintf(outfile, "%s%s\n",
 				**usagestr ? "    " : "",
 				*usagestr);
 		usagestr++;
 	}
 
 	if (opts->type != OPTION_GROUP)
-		fputc('\n', stderr);
+		fputc('\n', outfile);
 
 	for (; opts->type != OPTION_END; opts++) {
 		size_t pos;
 		int pad;
 
 		if (opts->type == OPTION_GROUP) {
-			fputc('\n', stderr);
+			fputc('\n', outfile);
 			if (*opts->help)
-				fprintf(stderr, "%s\n", opts->help);
+				fprintf(outfile, "%s\n", opts->help);
 			continue;
 		}
 		if (!full && (opts->flags & PARSE_OPT_HIDDEN))
 			continue;
 
-		pos = fprintf(stderr, "    ");
+		pos = fprintf(outfile, "    ");
 		if (opts->short_name && !(opts->flags & PARSE_OPT_NEGHELP)) {
 			if (opts->flags & PARSE_OPT_NODASH)
-				pos += fprintf(stderr, "%c", opts->short_name);
+				pos += fprintf(outfile, "%c", opts->short_name);
 			else
-				pos += fprintf(stderr, "-%c", opts->short_name);
+				pos += fprintf(outfile, "-%c", opts->short_name);
 		}
 		if (opts->long_name && opts->short_name)
-			pos += fprintf(stderr, ", ");
+			pos += fprintf(outfile, ", ");
 		if (opts->long_name)
-			pos += fprintf(stderr, "--%s%s",
+			pos += fprintf(outfile, "--%s%s",
 				(opts->flags & PARSE_OPT_NEGHELP) ?  "no-" : "",
 				opts->long_name);
 		if (opts->type == OPTION_NUMBER)
-			pos += fprintf(stderr, "-NUM");
+			pos += fprintf(outfile, "-NUM");
 
 		if (!(opts->flags & PARSE_OPT_NOARG))
-			pos += usage_argh(opts);
+			pos += usage_argh(opts, outfile);
 
 		if (pos <= USAGE_OPTS_WIDTH)
 			pad = USAGE_OPTS_WIDTH - pos;
 		else {
-			fputc('\n', stderr);
+			fputc('\n', outfile);
 			pad = USAGE_OPTS_WIDTH;
 		}
-		fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help);
+		fprintf(outfile, "%*s%s\n", pad + USAGE_GAP, "", opts->help);
 	}
-	fputc('\n', stderr);
+	fputc('\n', outfile);
+
+	if (!err && ctx && ctx->flags & PARSE_OPT_SHELL_EVAL)
+		fputs("EOF\n", outfile);
 
 	return PARSE_OPT_HELP;
 }
@@ -552,7 +563,7 @@
 void usage_with_options(const char * const *usagestr,
 			const struct option *opts)
 {
-	usage_with_options_internal(usagestr, opts, 0);
+	usage_with_options_internal(NULL, usagestr, opts, 0, 1);
 	exit(129);
 }
 
@@ -564,10 +575,11 @@
 	usage_with_options(usagestr, options);
 }
 
-static int parse_options_usage(const char * const *usagestr,
-			       const struct option *opts)
+static int parse_options_usage(struct parse_opt_ctx_t *ctx,
+			       const char * const *usagestr,
+			       const struct option *opts, int err)
 {
-	return usage_with_options_internal(usagestr, opts, 0);
+	return usage_with_options_internal(ctx, usagestr, opts, 0, err);
 }
 
 
diff --git a/parse-options.h b/parse-options.h
index 7581e93..7435cdb 100644
--- a/parse-options.h
+++ b/parse-options.h
@@ -25,7 +25,7 @@
 	PARSE_OPT_STOP_AT_NON_OPTION = 2,
 	PARSE_OPT_KEEP_ARGV0 = 4,
 	PARSE_OPT_KEEP_UNKNOWN = 8,
-	PARSE_OPT_NO_INTERNAL_HELP = 16,
+	PARSE_OPT_NO_INTERNAL_HELP = 16
 };
 
 enum parse_opt_option_flags {
@@ -37,6 +37,7 @@
 	PARSE_OPT_NODASH = 32,
 	PARSE_OPT_LITERAL_ARGHELP = 64,
 	PARSE_OPT_NEGHELP = 128,
+	PARSE_OPT_SHELL_EVAL = 256
 };
 
 struct option;
@@ -160,7 +161,7 @@
 enum {
 	PARSE_OPT_HELP = -1,
 	PARSE_OPT_DONE,
-	PARSE_OPT_UNKNOWN,
+	PARSE_OPT_UNKNOWN
 };
 
 /*
diff --git a/perl/Git.pm b/perl/Git.pm
index 1926dc9..6cb0dd1 100644
--- a/perl/Git.pm
+++ b/perl/Git.pm
@@ -172,7 +172,7 @@
 	}
 
 	if (defined $opts{Directory}) {
-		-d $opts{Directory} or throw Error::Simple("Directory not found: $!");
+		-d $opts{Directory} or throw Error::Simple("Directory not found: $opts{Directory} $!");
 
 		my $search = Git->repository(WorkingCopy => $opts{Directory});
 		my $dir;
@@ -545,7 +545,7 @@
 		or throw Error::Simple("bare repository");
 
 	-d $self->wc_path().'/'.$subdir
-		or throw Error::Simple("subdir not found: $!");
+		or throw Error::Simple("subdir not found: $subdir $!");
 	# Of course we will not "hold" the subdirectory so anyone
 	# can delete it now and we will never know. But at least we tried.
 
diff --git a/pretty.c b/pretty.c
index 8b18efd..f85444b 100644
--- a/pretty.c
+++ b/pretty.c
@@ -942,6 +942,7 @@
 		NO_MAGIC,
 		ADD_LF_BEFORE_NON_EMPTY,
 		DEL_LF_BEFORE_EMPTY,
+		ADD_SP_BEFORE_NON_EMPTY
 	} magic = NO_MAGIC;
 
 	switch (placeholder[0]) {
@@ -951,6 +952,9 @@
 	case '+':
 		magic = ADD_LF_BEFORE_NON_EMPTY;
 		break;
+	case ' ':
+		magic = ADD_SP_BEFORE_NON_EMPTY;
+		break;
 	default:
 		break;
 	}
@@ -965,8 +969,11 @@
 	if ((orig_len == sb->len) && magic == DEL_LF_BEFORE_EMPTY) {
 		while (sb->len && sb->buf[sb->len - 1] == '\n')
 			strbuf_setlen(sb, sb->len - 1);
-	} else if ((orig_len != sb->len) && magic == ADD_LF_BEFORE_NON_EMPTY) {
-		strbuf_insert(sb, orig_len, "\n", 1);
+	} else if (orig_len != sb->len) {
+		if (magic == ADD_LF_BEFORE_NON_EMPTY)
+			strbuf_insert(sb, orig_len, "\n", 1);
+		else if (magic == ADD_SP_BEFORE_NON_EMPTY)
+			strbuf_insert(sb, orig_len, " ", 1);
 	}
 	return consumed + 1;
 }
@@ -976,7 +983,7 @@
 {
 	struct userformat_want *w = context;
 
-	if (*placeholder == '+' || *placeholder == '-')
+	if (*placeholder == '+' || *placeholder == '-' || *placeholder == ' ')
 		placeholder++;
 
 	switch (*placeholder) {
diff --git a/reflog-walk.c b/reflog-walk.c
index caba4f7..4879615 100644
--- a/reflog-walk.c
+++ b/reflog-walk.c
@@ -162,7 +162,7 @@
 	} else
 		recno = 0;
 
-	item = string_list_lookup(branch, &info->complete_reflogs);
+	item = string_list_lookup(&info->complete_reflogs, branch);
 	if (item)
 		reflogs = item->util;
 	else {
@@ -190,7 +190,7 @@
 		}
 		if (!reflogs || reflogs->nr == 0)
 			return -1;
-		string_list_insert(branch, &info->complete_reflogs)->util
+		string_list_insert(&info->complete_reflogs, branch)->util
 			= reflogs;
 	}
 
diff --git a/refs.c b/refs.c
index d3db15a..6f486ae 100644
--- a/refs.c
+++ b/refs.c
@@ -314,7 +314,11 @@
 
 void warn_dangling_symref(FILE *fp, const char *msg_fmt, const char *refname)
 {
-	struct warn_if_dangling_data data = { fp, refname, msg_fmt };
+	struct warn_if_dangling_data data;
+
+	data.fp = fp;
+	data.refname = refname;
+	data.msg_fmt = msg_fmt;
 	for_each_rawref(warn_if_dangling_symref, &data);
 }
 
@@ -1258,10 +1262,49 @@
 	return cp - buf;
 }
 
+int log_ref_setup(const char *ref_name, char *logfile, int bufsize)
+{
+	int logfd, oflags = O_APPEND | O_WRONLY;
+
+	git_snpath(logfile, bufsize, "logs/%s", ref_name);
+	if (log_all_ref_updates &&
+	    (!prefixcmp(ref_name, "refs/heads/") ||
+	     !prefixcmp(ref_name, "refs/remotes/") ||
+	     !prefixcmp(ref_name, "refs/notes/") ||
+	     !strcmp(ref_name, "HEAD"))) {
+		if (safe_create_leading_directories(logfile) < 0)
+			return error("unable to create directory for %s",
+				     logfile);
+		oflags |= O_CREAT;
+	}
+
+	logfd = open(logfile, oflags, 0666);
+	if (logfd < 0) {
+		if (!(oflags & O_CREAT) && errno == ENOENT)
+			return 0;
+
+		if ((oflags & O_CREAT) && errno == EISDIR) {
+			if (remove_empty_directories(logfile)) {
+				return error("There are still logs under '%s'",
+					     logfile);
+			}
+			logfd = open(logfile, oflags, 0666);
+		}
+
+		if (logfd < 0)
+			return error("Unable to append to %s: %s",
+				     logfile, strerror(errno));
+	}
+
+	adjust_shared_perm(logfile);
+	close(logfd);
+	return 0;
+}
+
 static int log_ref_write(const char *ref_name, const unsigned char *old_sha1,
 			 const unsigned char *new_sha1, const char *msg)
 {
-	int logfd, written, oflags = O_APPEND | O_WRONLY;
+	int logfd, result, written, oflags = O_APPEND | O_WRONLY;
 	unsigned maxlen, len;
 	int msglen;
 	char log_file[PATH_MAX];
@@ -1271,39 +1314,13 @@
 	if (log_all_ref_updates < 0)
 		log_all_ref_updates = !is_bare_repository();
 
-	git_snpath(log_file, sizeof(log_file), "logs/%s", ref_name);
+	result = log_ref_setup(ref_name, log_file, sizeof(log_file));
+	if (result)
+		return result;
 
-	if (log_all_ref_updates &&
-	    (!prefixcmp(ref_name, "refs/heads/") ||
-	     !prefixcmp(ref_name, "refs/remotes/") ||
-	     !prefixcmp(ref_name, "refs/notes/") ||
-	     !strcmp(ref_name, "HEAD"))) {
-		if (safe_create_leading_directories(log_file) < 0)
-			return error("unable to create directory for %s",
-				     log_file);
-		oflags |= O_CREAT;
-	}
-
-	logfd = open(log_file, oflags, 0666);
-	if (logfd < 0) {
-		if (!(oflags & O_CREAT) && errno == ENOENT)
-			return 0;
-
-		if ((oflags & O_CREAT) && errno == EISDIR) {
-			if (remove_empty_directories(log_file)) {
-				return error("There are still logs under '%s'",
-					     log_file);
-			}
-			logfd = open(log_file, oflags, 0666);
-		}
-
-		if (logfd < 0)
-			return error("Unable to append to %s: %s",
-				     log_file, strerror(errno));
-	}
-
-	adjust_shared_perm(log_file);
-
+	logfd = open(log_file, oflags);
+	if (logfd < 0)
+		return 0;
 	msglen = msg ? strlen(msg) : 0;
 	committer = git_committer_info(0);
 	maxlen = strlen(committer) + msglen + 100;
diff --git a/refs.h b/refs.h
index 4a18b08..762ce50 100644
--- a/refs.h
+++ b/refs.h
@@ -68,6 +68,9 @@
 /** Writes sha1 into the ref specified by the lock. **/
 extern int write_ref_sha1(struct ref_lock *lock, const unsigned char *sha1, const char *msg);
 
+/** Setup reflog before using. **/
+int log_ref_setup(const char *ref_name, char *logfile, int bufsize);
+
 /** Reads log for the value of ref during at_time. **/
 extern int read_ref_at(const char *ref, unsigned long at_time, int cnt, unsigned char *sha1, char **msg, unsigned long *cutoff_time, int *cutoff_tz, int *cutoff_cnt);
 
diff --git a/remote.c b/remote.c
index ea2323b..afbba47 100644
--- a/remote.c
+++ b/remote.c
@@ -659,10 +659,9 @@
 
 int valid_fetch_refspec(const char *fetch_refspec_str)
 {
-	const char *fetch_refspec[] = { fetch_refspec_str };
 	struct refspec *refspec;
 
-	refspec = parse_refspec_internal(1, fetch_refspec, 1, 1);
+	refspec = parse_refspec_internal(1, &fetch_refspec_str, 1, 1);
 	free_refspecs(refspec, 1);
 	return !!refspec;
 }
@@ -763,7 +762,7 @@
 		if (!ref_map->peer_ref)
 			continue;
 
-		item = string_list_lookup(ref_map->peer_ref->name, &refs);
+		item = string_list_lookup(&refs, ref_map->peer_ref->name);
 		if (item) {
 			if (strcmp(((struct ref *)item->util)->name,
 				   ref_map->name))
@@ -778,7 +777,7 @@
 			continue;
 		}
 
-		item = string_list_insert(ref_map->peer_ref->name, &refs);
+		item = string_list_insert(&refs, ref_map->peer_ref->name);
 		item->util = ref_map;
 	}
 	string_list_clear(&refs, 0);
@@ -1711,7 +1710,7 @@
 	info.ref_names = &ref_names;
 	info.stale_refs_tail = &stale_refs;
 	for (ref = fetch_map; ref; ref = ref->next)
-		string_list_append(ref->name, &ref_names);
+		string_list_append(&ref_names, ref->name);
 	sort_string_list(&ref_names);
 	for_each_ref(get_stale_heads_cb, &info);
 	string_list_clear(&ref_names, 0);
diff --git a/remote.h b/remote.h
index 6e13643..888d7c1 100644
--- a/remote.h
+++ b/remote.h
@@ -145,7 +145,7 @@
 enum match_refs_flags {
 	MATCH_REFS_NONE		= 0,
 	MATCH_REFS_ALL 		= (1 << 0),
-	MATCH_REFS_MIRROR	= (1 << 1),
+	MATCH_REFS_MIRROR	= (1 << 1)
 };
 
 /* Reporting of tracking info */
diff --git a/rerere.c b/rerere.c
index f221bed..d03a696 100644
--- a/rerere.c
+++ b/rerere.c
@@ -46,7 +46,7 @@
 			; /* do nothing */
 		if (i == sizeof(buf))
 			die("filename too long");
-		string_list_insert(buf, rr)->util = name;
+		string_list_insert(rr, buf)->util = name;
 	}
 	fclose(in);
 }
@@ -153,7 +153,7 @@
 	git_SHA_CTX ctx;
 	int hunk_no = 0;
 	enum {
-		RR_CONTEXT = 0, RR_SIDE_1, RR_SIDE_2, RR_ORIGINAL,
+		RR_CONTEXT = 0, RR_SIDE_1, RR_SIDE_2, RR_ORIGINAL
 	} hunk = RR_CONTEXT;
 	struct strbuf one = STRBUF_INIT, two = STRBUF_INIT;
 	struct strbuf buf = STRBUF_INIT;
@@ -354,7 +354,7 @@
 		    ce_same_name(e2, e3) &&
 		    S_ISREG(e2->ce_mode) &&
 		    S_ISREG(e3->ce_mode)) {
-			string_list_insert((const char *)e2->name, conflict);
+			string_list_insert(conflict, (const char *)e2->name);
 			i++; /* skip over both #2 and #3 */
 		}
 	}
@@ -449,7 +449,7 @@
 			if (ret < 1)
 				continue;
 			hex = xstrdup(sha1_to_hex(sha1));
-			string_list_insert(path, rr)->util = hex;
+			string_list_insert(rr, path)->util = hex;
 			if (mkdir(git_path("rr-cache/%s", hex), 0755))
 				continue;
 			handle_file(path, NULL, rerere_path(hex, "preimage"));
@@ -471,7 +471,7 @@
 		if (has_rerere_resolution(name)) {
 			if (!merge(name, path)) {
 				if (rerere_autoupdate)
-					string_list_insert(path, &update);
+					string_list_insert(&update, path);
 				fprintf(stderr,
 					"%s '%s' using previous resolution.\n",
 					rerere_autoupdate
@@ -577,7 +577,7 @@
 	fprintf(stderr, "Updated preimage for '%s'\n", path);
 
 
-	string_list_insert(path, rr)->util = hex;
+	string_list_insert(rr, path)->util = hex;
 	fprintf(stderr, "Forgot resolution for %s\n", path);
 	return 0;
 }
diff --git a/resolve-undo.c b/resolve-undo.c
index 0f50ee0..174ebec 100644
--- a/resolve-undo.c
+++ b/resolve-undo.c
@@ -20,7 +20,7 @@
 		istate->resolve_undo = resolve_undo;
 	}
 	resolve_undo = istate->resolve_undo;
-	lost = string_list_insert(ce->name, resolve_undo);
+	lost = string_list_insert(resolve_undo, ce->name);
 	if (!lost->util)
 		lost->util = xcalloc(1, sizeof(*ui));
 	ui = lost->util;
@@ -50,7 +50,7 @@
 
 void resolve_undo_write(struct strbuf *sb, struct string_list *resolve_undo)
 {
-	for_each_string_list(write_one, resolve_undo, sb);
+   for_each_string_list(resolve_undo, write_one, sb);
 }
 
 struct string_list *resolve_undo_read(const char *data, unsigned long size)
@@ -70,7 +70,7 @@
 		len = strlen(data) + 1;
 		if (size <= len)
 			goto error;
-		lost = string_list_insert(data, resolve_undo);
+		lost = string_list_insert(resolve_undo, data);
 		if (!lost->util)
 			lost->util = xcalloc(1, sizeof(*ui));
 		ui = lost->util;
@@ -135,7 +135,7 @@
 			pos++;
 		return pos - 1; /* return the last entry processed */
 	}
-	item = string_list_lookup(ce->name, istate->resolve_undo);
+	item = string_list_lookup(istate->resolve_undo, ce->name);
 	if (!item)
 		return pos;
 	ru = item->util;
diff --git a/revision.c b/revision.c
index f4b8b38..7e82efd 100644
--- a/revision.c
+++ b/revision.c
@@ -646,6 +646,93 @@
 	return slop-1;
 }
 
+/*
+ * "rev-list --ancestry-path A..B" computes commits that are ancestors
+ * of B but not ancestors of A but further limits the result to those
+ * that are descendants of A.  This takes the list of bottom commits and
+ * the result of "A..B" without --ancestry-path, and limits the latter
+ * further to the ones that can reach one of the commits in "bottom".
+ */
+static void limit_to_ancestry(struct commit_list *bottom, struct commit_list *list)
+{
+	struct commit_list *p;
+	struct commit_list *rlist = NULL;
+	int made_progress;
+
+	/*
+	 * Reverse the list so that it will be likely that we would
+	 * process parents before children.
+	 */
+	for (p = list; p; p = p->next)
+		commit_list_insert(p->item, &rlist);
+
+	for (p = bottom; p; p = p->next)
+		p->item->object.flags |= TMP_MARK;
+
+	/*
+	 * Mark the ones that can reach bottom commits in "list",
+	 * in a bottom-up fashion.
+	 */
+	do {
+		made_progress = 0;
+		for (p = rlist; p; p = p->next) {
+			struct commit *c = p->item;
+			struct commit_list *parents;
+			if (c->object.flags & (TMP_MARK | UNINTERESTING))
+				continue;
+			for (parents = c->parents;
+			     parents;
+			     parents = parents->next) {
+				if (!(parents->item->object.flags & TMP_MARK))
+					continue;
+				c->object.flags |= TMP_MARK;
+				made_progress = 1;
+				break;
+			}
+		}
+	} while (made_progress);
+
+	/*
+	 * NEEDSWORK: decide if we want to remove parents that are
+	 * not marked with TMP_MARK from commit->parents for commits
+	 * in the resulting list.  We may not want to do that, though.
+	 */
+
+	/*
+	 * The ones that are not marked with TMP_MARK are uninteresting
+	 */
+	for (p = list; p; p = p->next) {
+		struct commit *c = p->item;
+		if (c->object.flags & TMP_MARK)
+			continue;
+		c->object.flags |= UNINTERESTING;
+	}
+
+	/* We are done with the TMP_MARK */
+	for (p = list; p; p = p->next)
+		p->item->object.flags &= ~TMP_MARK;
+	for (p = bottom; p; p = p->next)
+		p->item->object.flags &= ~TMP_MARK;
+	free_commit_list(rlist);
+}
+
+/*
+ * Before walking the history, keep the set of "negative" refs the
+ * caller has asked to exclude.
+ *
+ * This is used to compute "rev-list --ancestry-path A..B", as we need
+ * to filter the result of "A..B" further to the ones that can actually
+ * reach A.
+ */
+static struct commit_list *collect_bottom_commits(struct commit_list *list)
+{
+	struct commit_list *elem, *bottom = NULL;
+	for (elem = list; elem; elem = elem->next)
+		if (elem->item->object.flags & UNINTERESTING)
+			commit_list_insert(elem->item, &bottom);
+	return bottom;
+}
+
 static int limit_list(struct rev_info *revs)
 {
 	int slop = SLOP;
@@ -653,6 +740,13 @@
 	struct commit_list *list = revs->commits;
 	struct commit_list *newlist = NULL;
 	struct commit_list **p = &newlist;
+	struct commit_list *bottom = NULL;
+
+	if (revs->ancestry_path) {
+		bottom = collect_bottom_commits(list);
+		if (!bottom)
+			die("--ancestry-path given but there are no bottom commits");
+	}
 
 	while (list) {
 		struct commit_list *entry = list;
@@ -694,6 +788,11 @@
 	if (revs->cherry_pick)
 		cherry_pick_list(newlist, revs);
 
+	if (bottom) {
+		limit_to_ancestry(bottom, newlist);
+		free_commit_list(bottom);
+	}
+
 	revs->commits = newlist;
 	return 0;
 }
@@ -1063,18 +1162,22 @@
 
 	if (!prefixcmp(arg, "--max-count=")) {
 		revs->max_count = atoi(arg + 12);
+		revs->no_walk = 0;
 	} else if (!prefixcmp(arg, "--skip=")) {
 		revs->skip_count = atoi(arg + 7);
 	} else if ((*arg == '-') && isdigit(arg[1])) {
 	/* accept -<digit>, like traditional "head" */
 		revs->max_count = atoi(arg + 1);
+		revs->no_walk = 0;
 	} else if (!strcmp(arg, "-n")) {
 		if (argc <= 1)
 			return error("-n requires an argument");
 		revs->max_count = atoi(argv[1]);
+		revs->no_walk = 0;
 		return 2;
 	} else if (!prefixcmp(arg, "-n")) {
 		revs->max_count = atoi(arg + 2);
+		revs->no_walk = 0;
 	} else if (!prefixcmp(arg, "--max-age=")) {
 		revs->max_age = atoi(arg + 10);
 	} else if (!prefixcmp(arg, "--since=")) {
@@ -1089,6 +1192,10 @@
 		revs->min_age = approxidate(arg + 8);
 	} else if (!strcmp(arg, "--first-parent")) {
 		revs->first_parent_only = 1;
+	} else if (!strcmp(arg, "--ancestry-path")) {
+		revs->ancestry_path = 1;
+		revs->simplify_history = 0;
+		revs->limited = 1;
 	} else if (!strcmp(arg, "-g") || !strcmp(arg, "--walk-reflogs")) {
 		init_reflog_walk(&revs->reflog_info);
 	} else if (!strcmp(arg, "--default")) {
@@ -1146,6 +1253,8 @@
 		revs->boundary = 1;
 	} else if (!strcmp(arg, "--left-right")) {
 		revs->left_right = 1;
+	} else if (!strcmp(arg, "--count")) {
+		revs->count = 1;
 	} else if (!strcmp(arg, "--cherry-pick")) {
 		revs->cherry_pick = 1;
 		revs->limited = 1;
@@ -1205,8 +1314,8 @@
 		else
 			strbuf_addstr(&buf, "refs/notes/");
 		strbuf_addstr(&buf, arg+13);
-		string_list_append(strbuf_detach(&buf, NULL),
-				   revs->notes_opt.extra_notes_refs);
+		string_list_append(revs->notes_opt.extra_notes_refs,
+				   strbuf_detach(&buf, NULL));
 	} else if (!strcmp(arg, "--no-notes")) {
 		revs->show_notes = 0;
 		revs->show_notes_given = 1;
@@ -1781,7 +1890,7 @@
 enum rewrite_result {
 	rewrite_one_ok,
 	rewrite_one_noparents,
-	rewrite_one_error,
+	rewrite_one_error
 };
 
 static enum rewrite_result rewrite_one(struct rev_info *revs, struct commit **pp)
diff --git a/revision.h b/revision.h
index 568f1c9..36fdf22 100644
--- a/revision.h
+++ b/revision.h
@@ -57,6 +57,7 @@
 			limited:1,
 			unpacked:1,
 			boundary:2,
+			count:1,
 			left_right:1,
 			rewrite_parents:1,
 			print_parents:1,
@@ -66,6 +67,7 @@
 			reverse_output_stage:1,
 			cherry_pick:1,
 			bisect:1,
+			ancestry_path:1,
 			first_parent_only:1;
 
 	/* Diff flags */
@@ -131,6 +133,10 @@
 
 	/* notes-specific options: which refs to show */
 	struct display_notes_opt notes_opt;
+
+	/* commit counts */
+	int count_left;
+	int count_right;
 };
 
 #define REV_TREE_SAME		0
diff --git a/run-command.c b/run-command.c
index c7793f5..2a1041e 100644
--- a/run-command.c
+++ b/run-command.c
@@ -84,6 +84,7 @@
 	unused = write(child_err, "\n", 1);
 	exit(128);
 }
+#endif
 
 static inline void set_cloexec(int fd)
 {
@@ -91,7 +92,6 @@
 	if (flags >= 0)
 		fcntl(fd, F_SETFD, flags | FD_CLOEXEC);
 }
-#endif
 
 static int wait_or_whine(pid_t pid, const char *argv0, int silent_exec_failure)
 {
@@ -449,11 +449,35 @@
 	return run_command(&cmd);
 }
 
-#ifdef WIN32
-static unsigned __stdcall run_thread(void *data)
+#ifndef NO_PTHREADS
+static pthread_t main_thread;
+static int main_thread_set;
+static pthread_key_t async_key;
+
+static void *run_thread(void *data)
 {
 	struct async *async = data;
-	return async->proc(async->proc_in, async->proc_out, async->data);
+	intptr_t ret;
+
+	pthread_setspecific(async_key, async);
+	ret = async->proc(async->proc_in, async->proc_out, async->data);
+	return (void *)ret;
+}
+
+static NORETURN void die_async(const char *err, va_list params)
+{
+	vreportf("fatal: ", err, params);
+
+	if (!pthread_equal(main_thread, pthread_self())) {
+		struct async *async = pthread_getspecific(async_key);
+		if (async->proc_in >= 0)
+			close(async->proc_in);
+		if (async->proc_out >= 0)
+			close(async->proc_out);
+		pthread_exit((void *)128);
+	}
+
+	exit(128);
 }
 #endif
 
@@ -499,7 +523,7 @@
 	else
 		proc_out = -1;
 
-#ifndef WIN32
+#ifdef NO_PTHREADS
 	/* Flush stdio before fork() to avoid cloning buffers */
 	fflush(NULL);
 
@@ -526,12 +550,29 @@
 	else if (async->out)
 		close(async->out);
 #else
+	if (!main_thread_set) {
+		/*
+		 * We assume that the first time that start_async is called
+		 * it is from the main thread.
+		 */
+		main_thread_set = 1;
+		main_thread = pthread_self();
+		pthread_key_create(&async_key, NULL);
+		set_die_routine(die_async);
+	}
+
+	if (proc_in >= 0)
+		set_cloexec(proc_in);
+	if (proc_out >= 0)
+		set_cloexec(proc_out);
 	async->proc_in = proc_in;
 	async->proc_out = proc_out;
-	async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
-	if (!async->tid) {
-		error("cannot create thread: %s", strerror(errno));
-		goto error;
+	{
+		int err = pthread_create(&async->tid, NULL, run_thread, async);
+		if (err) {
+			error("cannot create thread: %s", strerror(err));
+			goto error;
+		}
 	}
 #endif
 	return 0;
@@ -551,17 +592,15 @@
 
 int finish_async(struct async *async)
 {
-#ifndef WIN32
-	int ret = wait_or_whine(async->pid, "child process", 0);
+#ifdef NO_PTHREADS
+	return wait_or_whine(async->pid, "child process", 0);
 #else
-	DWORD ret = 0;
-	if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
-		ret = error("waiting for thread failed: %lu", GetLastError());
-	else if (!GetExitCodeThread(async->tid, &ret))
-		ret = error("cannot get thread exit code: %lu", GetLastError());
-	CloseHandle(async->tid);
+	void *ret = (void *)(intptr_t)(-1);
+
+	if (pthread_join(async->tid, &ret))
+		error("pthread_join failed");
+	return (int)(intptr_t)ret;
 #endif
-	return ret;
 }
 
 int run_hook(const char *index_file, const char *name, ...)
diff --git a/run-command.h b/run-command.h
index 94619f5..56491b9 100644
--- a/run-command.h
+++ b/run-command.h
@@ -1,6 +1,10 @@
 #ifndef RUN_COMMAND_H
 #define RUN_COMMAND_H
 
+#ifndef NO_PTHREADS
+#include <pthread.h>
+#endif
+
 struct child_process {
 	const char **argv;
 	pid_t pid;
@@ -74,10 +78,10 @@
 	void *data;
 	int in;		/* caller writes here and closes it */
 	int out;	/* caller reads from here and closes it */
-#ifndef WIN32
+#ifdef NO_PTHREADS
 	pid_t pid;
 #else
-	HANDLE tid;
+	pthread_t tid;
 	int proc_in;
 	int proc_out;
 #endif
diff --git a/sha1_name.c b/sha1_name.c
index bf92417..4f2af8d 100644
--- a/sha1_name.c
+++ b/sha1_name.c
@@ -679,8 +679,8 @@
 
 /*
  * This interprets names like ':/Initial revision of "git"' by searching
- * through history and returning the first commit whose message starts
- * with the given string.
+ * through history and returning the first commit whose message matches
+ * the given regular expression.
  *
  * For future extension, ':/!' is reserved. If you want to match a message
  * beginning with a '!', you have to repeat the exclamation mark.
@@ -692,12 +692,17 @@
 	struct commit_list *list = NULL, *backup = NULL, *l;
 	int retval = -1;
 	char *temp_commit_buffer = NULL;
+	regex_t regex;
 
 	if (prefix[0] == '!') {
 		if (prefix[1] != '!')
 			die ("Invalid search pattern: %s", prefix);
 		prefix++;
 	}
+
+	if (regcomp(&regex, prefix, REG_EXTENDED))
+		die("Invalid search pattern: %s", prefix);
+
 	for_each_ref(handle_one_ref, &list);
 	for (l = list; l; l = l->next)
 		commit_list_insert(l->item, &backup);
@@ -721,12 +726,13 @@
 		}
 		if (!(p = strstr(p, "\n\n")))
 			continue;
-		if (!prefixcmp(p + 2, prefix)) {
+		if (!regexec(&regex, p + 2, 0, NULL, 0)) {
 			hashcpy(sha1, commit->object.sha1);
 			retval = 0;
 			break;
 		}
 	}
+	regfree(&regex);
 	free(temp_commit_buffer);
 	free_commit_list(list);
 	for (l = backup; l; l = l->next)
@@ -933,8 +939,8 @@
  */
 int get_sha1(const char *name, unsigned char *sha1)
 {
-	unsigned unused;
-	return get_sha1_with_mode(name, sha1, &unused);
+	struct object_context unused;
+	return get_sha1_with_context(name, sha1, &unused);
 }
 
 /* Must be called only when object_name:filename doesn't exist. */
@@ -1032,11 +1038,23 @@
 
 int get_sha1_with_mode_1(const char *name, unsigned char *sha1, unsigned *mode, int gently, const char *prefix)
 {
+	struct object_context oc;
+	int ret;
+	ret = get_sha1_with_context_1(name, sha1, &oc, gently, prefix);
+	*mode = oc.mode;
+	return ret;
+}
+
+int get_sha1_with_context_1(const char *name, unsigned char *sha1,
+			    struct object_context *oc,
+			    int gently, const char *prefix)
+{
 	int ret, bracket_depth;
 	int namelen = strlen(name);
 	const char *cp;
 
-	*mode = S_IFINVALID;
+	memset(oc, 0, sizeof(*oc));
+	oc->mode = S_IFINVALID;
 	ret = get_sha1_1(name, namelen, sha1);
 	if (!ret)
 		return ret;
@@ -1059,6 +1077,11 @@
 			cp = name + 3;
 		}
 		namelen = namelen - (cp - name);
+
+		strncpy(oc->path, cp,
+			sizeof(oc->path));
+		oc->path[sizeof(oc->path)-1] = '\0';
+
 		if (!active_cache)
 			read_cache();
 		pos = cache_name_pos(cp, namelen);
@@ -1071,7 +1094,6 @@
 				break;
 			if (ce_stage(ce) == stage) {
 				hashcpy(sha1, ce->sha1);
-				*mode = ce->ce_mode;
 				return 0;
 			}
 			pos++;
@@ -1098,12 +1120,17 @@
 		}
 		if (!get_sha1_1(name, cp-name, tree_sha1)) {
 			const char *filename = cp+1;
-			ret = get_tree_entry(tree_sha1, filename, sha1, mode);
+			ret = get_tree_entry(tree_sha1, filename, sha1, &oc->mode);
 			if (!gently) {
 				diagnose_invalid_sha1_path(prefix, filename,
 							   tree_sha1, object_name);
 				free(object_name);
 			}
+			hashcpy(oc->tree, tree_sha1);
+			strncpy(oc->path, filename,
+				sizeof(oc->path));
+			oc->path[sizeof(oc->path)-1] = '\0';
+
 			return ret;
 		} else {
 			if (!gently)
diff --git a/string-list.c b/string-list.c
index c9ad7fc..9b023a2 100644
--- a/string-list.c
+++ b/string-list.c
@@ -51,13 +51,13 @@
 	return index;
 }
 
-struct string_list_item *string_list_insert(const char *string, struct string_list *list)
+struct string_list_item *string_list_insert(struct string_list *list, const char *string)
 {
-	return string_list_insert_at_index(-1, string, list);
+	return string_list_insert_at_index(list, -1, string);
 }
 
-struct string_list_item *string_list_insert_at_index(int insert_at,
-						     const char *string, struct string_list *list)
+struct string_list_item *string_list_insert_at_index(struct string_list *list,
+						     int insert_at, const char *string)
 {
 	int index = add_entry(insert_at, list, string);
 
@@ -84,7 +84,7 @@
 	return index;
 }
 
-struct string_list_item *string_list_lookup(const char *string, struct string_list *list)
+struct string_list_item *string_list_lookup(struct string_list *list, const char *string)
 {
 	int exact_match, i = get_entry_index(list, string, &exact_match);
 	if (!exact_match)
@@ -92,8 +92,8 @@
 	return list->items + i;
 }
 
-int for_each_string_list(string_list_each_func_t fn,
-			 struct string_list *list, void *cb_data)
+int for_each_string_list(struct string_list *list,
+			 string_list_each_func_t fn, void *cb_data)
 {
 	int i, ret = 0;
 	for (i = 0; i < list->nr; i++)
@@ -139,7 +139,7 @@
 }
 
 
-void print_string_list(const char *text, const struct string_list *p)
+void print_string_list(const struct string_list *p, const char *text)
 {
 	int i;
 	if ( text )
@@ -148,7 +148,7 @@
 		printf("%s:%p\n", p->items[i].string, p->items[i].util);
 }
 
-struct string_list_item *string_list_append(const char *string, struct string_list *list)
+struct string_list_item *string_list_append(struct string_list *list, const char *string)
 {
 	ALLOC_GROW(list->items, list->nr + 1, list->alloc);
 	list->items[list->nr].string =
diff --git a/string-list.h b/string-list.h
index 63b69c8..680d600 100644
--- a/string-list.h
+++ b/string-list.h
@@ -12,7 +12,7 @@
 	unsigned int strdup_strings:1;
 };
 
-void print_string_list(const char *text, const struct string_list *p);
+void print_string_list(const struct string_list *p, const char *text);
 void string_list_clear(struct string_list *list, int free_util);
 
 /* Use this function to call a custom clear function on each util pointer */
@@ -22,20 +22,20 @@
 
 /* Use this function to iterate over each item */
 typedef int (*string_list_each_func_t)(struct string_list_item *, void *);
-int for_each_string_list(string_list_each_func_t,
-			 struct string_list *list, void *cb_data);
+int for_each_string_list(struct string_list *list,
+			 string_list_each_func_t, void *cb_data);
 
 /* Use these functions only on sorted lists: */
 int string_list_has_string(const struct string_list *list, const char *string);
 int string_list_find_insert_index(const struct string_list *list, const char *string,
 				  int negative_existing_index);
-struct string_list_item *string_list_insert(const char *string, struct string_list *list);
-struct string_list_item *string_list_insert_at_index(int insert_at,
-						     const char *string, struct string_list *list);
-struct string_list_item *string_list_lookup(const char *string, struct string_list *list);
+struct string_list_item *string_list_insert(struct string_list *list, const char *string);
+struct string_list_item *string_list_insert_at_index(struct string_list *list,
+						     int insert_at, const char *string);
+struct string_list_item *string_list_lookup(struct string_list *list, const char *string);
 
 /* Use these functions only on unsorted lists: */
-struct string_list_item *string_list_append(const char *string, struct string_list *list);
+struct string_list_item *string_list_append(struct string_list *list, const char *string);
 void sort_string_list(struct string_list *list);
 int unsorted_string_list_has_string(struct string_list *list, const char *string);
 struct string_list_item *unsorted_string_list_lookup(struct string_list *list,
diff --git a/submodule.c b/submodule.c
index 676d48f..61cb6e2 100644
--- a/submodule.c
+++ b/submodule.c
@@ -46,6 +46,19 @@
 	return ret;
 }
 
+void handle_ignore_submodules_arg(struct diff_options *diffopt,
+				  const char *arg)
+{
+	if (!strcmp(arg, "all"))
+		DIFF_OPT_SET(diffopt, IGNORE_SUBMODULES);
+	else if (!strcmp(arg, "untracked"))
+		DIFF_OPT_SET(diffopt, IGNORE_UNTRACKED_IN_SUBMODULES);
+	else if (!strcmp(arg, "dirty"))
+		DIFF_OPT_SET(diffopt, IGNORE_DIRTY_SUBMODULES);
+	else
+		die("bad --ignore-submodules argument: %s", arg);
+}
+
 void show_submodule_summary(FILE *f, const char *path,
 		unsigned char one[20], unsigned char two[20],
 		unsigned dirty_submodule,
diff --git a/submodule.h b/submodule.h
index dbda270..6fd3bb4 100644
--- a/submodule.h
+++ b/submodule.h
@@ -1,6 +1,9 @@
 #ifndef SUBMODULE_H
 #define SUBMODULE_H
 
+struct diff_options;
+
+void handle_ignore_submodules_arg(struct diff_options *diffopt, const char *);
 void show_submodule_summary(FILE *f, const char *path,
 		unsigned char one[20], unsigned char two[20],
 		unsigned dirty_submodule,
diff --git a/t/Makefile b/t/Makefile
index 25c559b..f9de24b 100644
--- a/t/Makefile
+++ b/t/Makefile
@@ -3,6 +3,7 @@
 # Copyright (c) 2005 Junio C Hamano
 #
 
+-include ../config.mak.autogen
 -include ../config.mak
 
 #GIT_TEST_OPTS=--verbose --debug
@@ -35,7 +36,9 @@
 	$(MAKE) clean
 
 aggregate-results:
-	'$(SHELL_PATH_SQ)' ./aggregate-results.sh test-results/t*-*
+	for f in test-results/t*-*; do \
+		echo "$$f"; \
+	done | '$(SHELL_PATH_SQ)' ./aggregate-results.sh
 
 # we can test NO_OPTIMIZE_COMMITS independently of LC_ALL
 full-svn-test:
diff --git a/t/aggregate-results.sh b/t/aggregate-results.sh
index d5bab75..d206b7c 100755
--- a/t/aggregate-results.sh
+++ b/t/aggregate-results.sh
@@ -6,7 +6,7 @@
 broken=0
 total=0
 
-for file
+while read file
 do
 	while read type value
 	do
diff --git a/t/lib-pager.sh b/t/lib-pager.sh
new file mode 100644
index 0000000..ba03eab
--- /dev/null
+++ b/t/lib-pager.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+test_expect_success 'determine default pager' '
+	test_might_fail git config --unset core.pager &&
+	less=$(
+		unset PAGER GIT_PAGER;
+		git var GIT_PAGER
+	) &&
+	test -n "$less"
+'
+
+if expr "$less" : '[a-z][a-z]*$' >/dev/null
+then
+	test_set_prereq SIMPLEPAGER
+fi
diff --git a/t/lib-t6000.sh b/t/lib-t6000.sh
index 985d517..ea25dd8 100644
--- a/t/lib-t6000.sh
+++ b/t/lib-t6000.sh
@@ -91,7 +91,7 @@
 	shift 1
 	if eval "$*" | entag > $_name.actual
 	then
-		diff $_name.expected $_name.actual
+		test_cmp $_name.expected $_name.actual
 	else
 		return 1;
 	fi
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 3ec9cbe..f2c7336 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -301,7 +301,7 @@
 EOF
 test_expect_success \
     'validate git diff-files output for a know cache/work tree state.' \
-    'git diff-files >current && diff >/dev/null -b current expected'
+    'git diff-files >current && test_cmp current expected >/dev/null'
 
 test_expect_success \
     'git update-index --refresh should succeed.' \
diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh
index c3e7e32..234a94f 100755
--- a/t/t0020-crlf.sh
+++ b/t/t0020-crlf.sh
@@ -453,5 +453,57 @@
 	git diff
 
 '
+# Some more tests here to add new autocrlf functionality.
+# We want to have a known state here, so start a bit from scratch
+
+test_expect_success 'setting up for new autocrlf tests' '
+	git config core.autocrlf false &&
+	git config core.safecrlf false &&
+	rm -rf .????* * &&
+	for w in I am all LF; do echo $w; done >alllf &&
+	for w in Oh here is CRLFQ in text; do echo $w; done | q_to_cr >mixed &&
+	for w in I am all CRLF; do echo $w; done | append_cr >allcrlf &&
+	git add -A . &&
+	git commit -m "alllf, allcrlf and mixed only" &&
+	git tag -a -m "message" autocrlf-checkpoint
+'
+
+test_expect_success 'report no change after setting autocrlf' '
+	git config core.autocrlf true &&
+	touch * &&
+	git diff --exit-code
+'
+
+test_expect_success 'files are clean after checkout' '
+	rm * &&
+	git checkout -f &&
+	git diff --exit-code
+'
+
+cr_to_Q_no_NL () {
+    tr '\015' Q | tr -d '\012'
+}
+
+test_expect_success 'LF only file gets CRLF with autocrlf' '
+	test "$(cr_to_Q_no_NL < alllf)" = "IQamQallQLFQ"
+'
+
+test_expect_success 'Mixed file is still mixed with autocrlf' '
+	test "$(cr_to_Q_no_NL < mixed)" = "OhhereisCRLFQintext"
+'
+
+test_expect_success 'CRLF only file has CRLF with autocrlf' '
+	test "$(cr_to_Q_no_NL < allcrlf)" = "IQamQallQCRLFQ"
+'
+
+test_expect_success 'New CRLF file gets LF in repo' '
+	tr -d "\015" < alllf | append_cr > alllf2 &&
+	git add alllf2 &&
+	git commit -m "alllf2 added" &&
+	git config core.autocrlf false &&
+	rm * &&
+	git checkout -f &&
+	test_cmp alllf alllf2
+'
 
 test_done
diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh
new file mode 100755
index 0000000..f5f67a6
--- /dev/null
+++ b/t/t0025-crlf-auto.sh
@@ -0,0 +1,155 @@
+#!/bin/sh
+
+test_description='CRLF conversion'
+
+. ./test-lib.sh
+
+has_cr() {
+	tr '\015' Q <"$1" | grep Q >/dev/null
+}
+
+test_expect_success setup '
+
+	git config core.autocrlf false &&
+
+	for w in Hello world how are you; do echo $w; done >one &&
+	for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >two &&
+	for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >three &&
+	git add . &&
+
+	git commit -m initial &&
+
+	one=`git rev-parse HEAD:one` &&
+	two=`git rev-parse HEAD:two` &&
+	three=`git rev-parse HEAD:three` &&
+
+	echo happy.
+'
+
+test_expect_success 'default settings cause no changes' '
+
+	rm -f .gitattributes tmp one two three &&
+	git read-tree --reset -u HEAD &&
+
+	! has_cr one &&
+	has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	threediff=`git diff three` &&
+	test -z "$onediff" -a -z "$twodiff" -a -z "$threediff"
+'
+
+test_expect_success 'crlf=true causes a CRLF file to be normalized' '
+
+	# Backwards compatibility check
+	rm -f .gitattributes tmp one two three &&
+	echo "two crlf" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	# Note, "normalized" means that git will normalize it if added
+	has_cr two &&
+	twodiff=`git diff two` &&
+	test -n "$twodiff"
+'
+
+test_expect_success 'text=true causes a CRLF file to be normalized' '
+
+	rm -f .gitattributes tmp one two three &&
+	echo "two text" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	# Note, "normalized" means that git will normalize it if added
+	has_cr two &&
+	twodiff=`git diff two` &&
+	test -n "$twodiff"
+'
+
+test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf false &&
+	echo "one eol=crlf" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	onediff=`git diff one` &&
+	test -z "$onediff"
+'
+
+test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf input &&
+	echo "one eol=crlf" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	onediff=`git diff one` &&
+	test -z "$onediff"
+'
+
+test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf true &&
+	echo "one eol=lf" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	! has_cr one &&
+	onediff=`git diff one` &&
+	test -z "$onediff"
+'
+
+test_expect_success 'autocrlf=true does not normalize CRLF files' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf true &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	threediff=`git diff three` &&
+	test -z "$onediff" -a -z "$twodiff" -a -z "$threediff"
+'
+
+test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf true &&
+	echo "* text=auto" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	threediff=`git diff three` &&
+	test -z "$onediff" -a -n "$twodiff" -a -z "$threediff"
+'
+
+test_expect_success 'text=auto, autocrlf=true does not normalize binary files' '
+
+	rm -f .gitattributes tmp one two three &&
+	git config core.autocrlf true &&
+	echo "* text=auto" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	! has_cr three &&
+	threediff=`git diff three` &&
+	test -z "$threediff"
+'
+
+test_expect_success 'eol=crlf _does_ normalize binary files' '
+
+	rm -f .gitattributes tmp one two three &&
+	echo "three eol=crlf" > .gitattributes &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr three &&
+	threediff=`git diff three` &&
+	test -z "$threediff"
+'
+
+test_done
diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh
new file mode 100755
index 0000000..f37ac8f
--- /dev/null
+++ b/t/t0026-eol-config.sh
@@ -0,0 +1,83 @@
+#!/bin/sh
+
+test_description='CRLF conversion'
+
+. ./test-lib.sh
+
+has_cr() {
+	tr '\015' Q <"$1" | grep Q >/dev/null
+}
+
+test_expect_success setup '
+
+	git config core.autocrlf false &&
+
+	echo "one text" > .gitattributes
+
+	for w in Hello world how are you; do echo $w; done >one &&
+	for w in I am very very fine thank you; do echo $w; done >two &&
+	git add . &&
+
+	git commit -m initial &&
+
+	one=`git rev-parse HEAD:one` &&
+	two=`git rev-parse HEAD:two` &&
+
+	echo happy.
+'
+
+test_expect_success 'eol=lf puts LFs in normalized file' '
+
+	rm -f .gitattributes tmp one two &&
+	git config core.eol lf &&
+	git read-tree --reset -u HEAD &&
+
+	! has_cr one &&
+	! has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	test -z "$onediff" -a -z "$twodiff"
+'
+
+test_expect_success 'eol=crlf puts CRLFs in normalized file' '
+
+	rm -f .gitattributes tmp one two &&
+	git config core.eol crlf &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	! has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	test -z "$onediff" -a -z "$twodiff"
+'
+
+test_expect_success 'autocrlf=true overrides eol=lf' '
+
+	rm -f .gitattributes tmp one two &&
+	git config core.eol lf &&
+	git config core.autocrlf true &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	test -z "$onediff" -a -z "$twodiff"
+'
+
+test_expect_success 'autocrlf=true overrides unset eol' '
+
+	rm -f .gitattributes tmp one two &&
+	git config --unset-all core.eol &&
+	git config core.autocrlf true &&
+	git read-tree --reset -u HEAD &&
+
+	has_cr one &&
+	has_cr two &&
+	onediff=`git diff one` &&
+	twodiff=`git diff two` &&
+	test -z "$onediff" -a -z "$twodiff"
+'
+
+test_done
diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh
index 3d450ed..2092450 100755
--- a/t/t0040-parse-options.sh
+++ b/t/t0040-parse-options.sh
@@ -7,7 +7,7 @@
 
 . ./test-lib.sh
 
-cat > expect.err << EOF
+cat > expect << EOF
 usage: test-parse-options <options>
 
     -b, --boolean         get a boolean
@@ -46,10 +46,12 @@
 
 test_expect_success 'test help' '
 	test_must_fail test-parse-options -h > output 2> output.err &&
-	test ! -s output &&
-	test_cmp expect.err output.err
+	test ! -s output.err &&
+	test_cmp expect output
 '
 
+mv expect expect.err
+
 cat > expect << EOF
 boolean: 2
 integer: 1729
diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh
index e504058..4346795 100755
--- a/t/t1502-rev-parse-parseopt.sh
+++ b/t/t1502-rev-parse-parseopt.sh
@@ -3,7 +3,8 @@
 test_description='test git rev-parse --parseopt'
 . ./test-lib.sh
 
-cat > expect.err <<EOF
+cat > expect <<\END_EXPECT
+cat <<\EOF
 usage: some-command [options] <args>...
 
     some-command does foo and bar!
@@ -19,6 +20,7 @@
     --extra1              line above used to cause a segfault but no longer does
 
 EOF
+END_EXPECT
 
 cat > optionspec << EOF
 some-command [options] <args>...
@@ -38,8 +40,8 @@
 EOF
 
 test_expect_success 'test --parseopt help output' '
-	git rev-parse --parseopt -- -h 2> output.err < optionspec
-	test_cmp expect.err output.err
+	git rev-parse --parseopt -- -h > output < optionspec
+	test_cmp expect output
 '
 
 cat > expect <<EOF
diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh
index a8297c6..be88d4b 100755
--- a/t/t2017-checkout-orphan.sh
+++ b/t/t2017-checkout-orphan.sh
@@ -49,6 +49,62 @@
 	test refs/heads/master = "$(git symbolic-ref HEAD)"
 '
 
+test_expect_success '--orphan must be rejected with -t' '
+	git checkout master &&
+	test_must_fail git checkout --orphan new -t master &&
+	test refs/heads/master = "$(git symbolic-ref HEAD)"
+'
+
+test_expect_success '--orphan ignores branch.autosetupmerge' '
+	git checkout master &&
+	git config branch.autosetupmerge always &&
+	git checkout --orphan gamma &&
+	test -z "$(git config branch.gamma.merge)" &&
+	test refs/heads/gamma = "$(git symbolic-ref HEAD)" &&
+	test_must_fail git rev-parse --verify HEAD^
+'
+
+test_expect_success '--orphan makes reflog by default' '
+	git checkout master &&
+	git config --unset core.logAllRefUpdates &&
+	git checkout --orphan delta &&
+	! test -f .git/logs/refs/heads/delta &&
+	test_must_fail PAGER= git reflog show delta &&
+	git commit -m Delta &&
+	test -f .git/logs/refs/heads/delta &&
+	PAGER= git reflog show delta
+'
+
+test_expect_success '--orphan does not make reflog when core.logAllRefUpdates = false' '
+	git checkout master &&
+	git config core.logAllRefUpdates false &&
+	git checkout --orphan epsilon &&
+	! test -f .git/logs/refs/heads/epsilon &&
+	test_must_fail PAGER= git reflog show epsilon &&
+	git commit -m Epsilon &&
+	! test -f .git/logs/refs/heads/epsilon &&
+	test_must_fail PAGER= git reflog show epsilon
+'
+
+test_expect_success '--orphan with -l makes reflog when core.logAllRefUpdates = false' '
+	git checkout master &&
+	git checkout -l --orphan zeta &&
+	test -f .git/logs/refs/heads/zeta &&
+	test_must_fail PAGER= git reflog show zeta &&
+	git commit -m Zeta &&
+	PAGER= git reflog show zeta
+'
+
+test_expect_success 'giving up --orphan not committed when -l and core.logAllRefUpdates = false deletes reflog' '
+	git checkout master &&
+	git checkout -l --orphan eta &&
+	test -f .git/logs/refs/heads/eta &&
+	test_must_fail PAGER= git reflog show eta &&
+	git checkout master &&
+	! test -f .git/logs/refs/heads/eta &&
+	test_must_fail PAGER= git reflog show eta
+'
+
 test_expect_success '--orphan is rejected with an existing name' '
 	git checkout master &&
 	test_must_fail git checkout --orphan master &&
@@ -60,31 +116,11 @@
 	git reset --hard &&
 	echo local >>"$TEST_FILE" &&
 	cat "$TEST_FILE" >"$TEST_FILE.saved" &&
-	test_must_fail git checkout --orphan gamma master^ &&
+	test_must_fail git checkout --orphan new master^ &&
 	test refs/heads/master = "$(git symbolic-ref HEAD)" &&
 	test_cmp "$TEST_FILE" "$TEST_FILE.saved" &&
 	git diff-index --quiet --cached HEAD &&
 	git reset --hard
 '
 
-test_expect_success '--orphan does not mix well with -t' '
-	git checkout master &&
-	test_must_fail git checkout -t master --orphan gamma &&
-	test refs/heads/master = "$(git symbolic-ref HEAD)"
-'
-
-test_expect_success '--orphan ignores branch.autosetupmerge' '
-	git checkout -f master &&
-	git config branch.autosetupmerge always &&
-	git checkout --orphan delta &&
-	test -z "$(git config branch.delta.merge)" &&
-	test refs/heads/delta = "$(git symbolic-ref HEAD)" &&
-	test_must_fail git rev-parse --verify HEAD^
-'
-
-test_expect_success '--orphan does not mix well with -l' '
-	git checkout -f master &&
-	test_must_fail git checkout -l --orphan gamma
-'
-
 test_done
diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
index e0b7605..859b99a 100755
--- a/t/t3200-branch.sh
+++ b/t/t3200-branch.sh
@@ -43,7 +43,7 @@
      git branch -l d/e/f &&
 	 test -f .git/refs/heads/d/e/f &&
 	 test -f .git/logs/refs/heads/d/e/f &&
-	 diff expect .git/logs/refs/heads/d/e/f'
+	 test_cmp expect .git/logs/refs/heads/d/e/f'
 
 test_expect_success \
     'git branch -d d/e/f should delete a branch and a log' \
@@ -222,7 +222,31 @@
      git checkout -b g/h/i -l master &&
 	 test -f .git/refs/heads/g/h/i &&
 	 test -f .git/logs/refs/heads/g/h/i &&
-	 diff expect .git/logs/refs/heads/g/h/i'
+	 test_cmp expect .git/logs/refs/heads/g/h/i'
+
+test_expect_success 'checkout -b makes reflog by default' '
+	git checkout master &&
+	git config --unset core.logAllRefUpdates &&
+	git checkout -b alpha &&
+	test -f .git/logs/refs/heads/alpha &&
+	PAGER= git reflog show alpha
+'
+
+test_expect_success 'checkout -b does not make reflog when core.logAllRefUpdates = false' '
+	git checkout master &&
+	git config core.logAllRefUpdates false &&
+	git checkout -b beta &&
+	! test -f .git/logs/refs/heads/beta &&
+	test_must_fail PAGER= git reflog show beta
+'
+
+test_expect_success 'checkout -b with -l makes reflog when core.logAllRefUpdates = false' '
+	git checkout master &&
+	git checkout -lb gamma &&
+	git config --unset core.logAllRefUpdates &&
+	test -f .git/logs/refs/heads/gamma &&
+	PAGER= git reflog show gamma
+'
 
 test_expect_success 'avoid ambiguous track' '
 	git config branch.autosetupmerge true &&
diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh
index 413019a..5251740 100755
--- a/t/t3210-pack-refs.sh
+++ b/t/t3210-pack-refs.sh
@@ -28,7 +28,7 @@
      SHA1=`cat .git/refs/heads/a` &&
      echo "$SHA1 refs/heads/a" >expect &&
      git show-ref a >result &&
-     diff expect result'
+     test_cmp expect result'
 
 test_expect_success \
     'see if a branch still exists when packed' \
@@ -37,7 +37,7 @@
      rm -f .git/refs/heads/b &&
      echo "$SHA1 refs/heads/b" >expect &&
      git show-ref b >result &&
-     diff expect result'
+     test_cmp expect result'
 
 test_expect_success 'git branch c/d should barf if branch c exists' '
      git branch c &&
@@ -52,7 +52,7 @@
      git pack-refs --all --prune &&
      echo "$SHA1 refs/heads/e" >expect &&
      git show-ref e >result &&
-     diff expect result'
+     test_cmp expect result'
 
 test_expect_success 'see if git pack-refs --prune remove ref files' '
      git branch f &&
@@ -109,7 +109,7 @@
 	git show-ref >all-of-them &&
 	git pack-refs &&
 	git show-ref >again &&
-	diff all-of-them again
+	test_cmp all-of-them again
 '
 
 test_done
diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh
index 64f32ad..2d67a40 100755
--- a/t/t3301-notes.sh
+++ b/t/t3301-notes.sh
@@ -1044,4 +1044,10 @@
 	git log -1 > output &&
 	test_cmp expect output
 '
+
+test_expect_success 'git notes copy diagnoses too many or too few parameters' '
+	test_must_fail git notes copy &&
+	test_must_fail git notes copy one two three
+'
+
 test_done
diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh
index e5691bc..d98c7b5 100755
--- a/t/t3400-rebase.sh
+++ b/t/t3400-rebase.sh
@@ -10,8 +10,9 @@
 '
 . ./test-lib.sh
 
-GIT_AUTHOR_EMAIL=bogus_email_address
-export GIT_AUTHOR_EMAIL
+GIT_AUTHOR_NAME=author@name
+GIT_AUTHOR_EMAIL=bogus@email@address
+export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL
 
 test_expect_success \
     'prepare repository with topic branches' \
@@ -80,6 +81,10 @@
     'the rebase operation should not have destroyed author information' \
     '! (git log | grep "Author:" | grep "<>")'
 
+test_expect_success \
+    'the rebase operation should not have destroyed author information (2)' \
+    "git log -1 | grep 'Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>'"
+
 test_expect_success 'HEAD was detached during rebase' '
      test $(git rev-parse HEAD@{1}) != $(git rev-parse my-topic-branch@{1})
 '
diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
index f20ea38..ee9a1b2 100755
--- a/t/t3404-rebase-interactive.sh
+++ b/t/t3404-rebase-interactive.sh
@@ -146,6 +146,16 @@
 	! test -d .git/rebase-merge
 '
 
+test_expect_success 'abort with error when new base cannot be checked out' '
+	git rm --cached file1 &&
+	git commit -m "remove file in base" &&
+	test_must_fail git rebase -i master > output 2>&1 &&
+	grep "Untracked working tree file .file1. would be overwritten" \
+		output &&
+	! test -d .git/rebase-merge &&
+	git reset --hard HEAD^
+'
+
 test_expect_success 'retain authorship' '
 	echo A > file7 &&
 	git add file7 &&
@@ -181,6 +191,12 @@
 	test $HEAD = $(git rev-parse HEAD)
 '
 
+test_expect_failure 'exchange two commits with -p' '
+	FAKE_LINES="2 1" git rebase -i -p HEAD~2 &&
+	test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
+	test G = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
 test_expect_success 'preserve merges with -p' '
 	git checkout -b to-be-preserved master^ &&
 	: > unrelated-file &&
diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh
index 7f85815..bc7aedd 100755
--- a/t/t3501-revert-cherry-pick.sh
+++ b/t/t3501-revert-cherry-pick.sh
@@ -41,13 +41,32 @@
 	git tag rename2
 '
 
+test_expect_success 'cherry-pick --nonsense' '
+
+	pos=$(git rev-parse HEAD) &&
+	git diff --exit-code HEAD &&
+	test_must_fail git cherry-pick --nonsense 2>msg &&
+	git diff --exit-code HEAD "$pos" &&
+	grep '[Uu]sage:' msg
+'
+
+test_expect_success 'revert --nonsense' '
+
+	pos=$(git rev-parse HEAD) &&
+	git diff --exit-code HEAD &&
+	test_must_fail git revert --nonsense 2>msg &&
+	git diff --exit-code HEAD "$pos" &&
+	grep '[Uu]sage:' msg
+'
+
 test_expect_success 'cherry-pick after renaming branch' '
 
 	git checkout rename2 &&
 	git cherry-pick added &&
 	test $(git rev-parse HEAD^) = $(git rev-parse rename2) &&
 	test -f opos &&
-	grep "Add extra line at the end" opos
+	grep "Add extra line at the end" opos &&
+	git reflog -1 | grep cherry-pick
 
 '
 
@@ -57,7 +76,8 @@
 	git revert added &&
 	test $(git rev-parse HEAD^) = $(git rev-parse rename1) &&
 	test -f spoo &&
-	! grep "Add extra line at the end" spoo
+	! grep "Add extra line at the end" spoo &&
+	git reflog -1 | grep revert
 
 '
 
diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh
new file mode 100755
index 0000000..f90ed3d
--- /dev/null
+++ b/t/t3508-cherry-pick-many-commits.sh
@@ -0,0 +1,105 @@
+#!/bin/sh
+
+test_description='test cherry-picking many commits'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+	echo first > file1 &&
+	git add file1 &&
+	test_tick &&
+	git commit -m "first" &&
+	git tag first &&
+
+	git checkout -b other &&
+	for val in second third fourth
+	do
+		echo $val >> file1 &&
+		git add file1 &&
+		test_tick &&
+		git commit -m "$val" &&
+		git tag $val
+	done
+'
+
+test_expect_success 'cherry-pick first..fourth works' '
+	git checkout -f master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick first..fourth &&
+	git diff --quiet other &&
+	git diff --quiet HEAD other &&
+	test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
+'
+
+test_expect_success 'cherry-pick --ff first..fourth works' '
+	git checkout -f master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick --ff first..fourth &&
+	git diff --quiet other &&
+	git diff --quiet HEAD other &&
+	test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify fourth)"
+'
+
+test_expect_success 'cherry-pick -n first..fourth works' '
+	git checkout -f master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick -n first..fourth &&
+	git diff --quiet other &&
+	git diff --cached --quiet other &&
+	git diff --quiet HEAD first
+'
+
+test_expect_success 'revert first..fourth works' '
+	git checkout -f master &&
+	git reset --hard fourth &&
+	test_tick &&
+	git revert first..fourth &&
+	git diff --quiet first &&
+	git diff --cached --quiet first &&
+	git diff --quiet HEAD first
+'
+
+test_expect_success 'revert ^first fourth works' '
+	git checkout -f master &&
+	git reset --hard fourth &&
+	test_tick &&
+	git revert ^first fourth &&
+	git diff --quiet first &&
+	git diff --cached --quiet first &&
+	git diff --quiet HEAD first
+'
+
+test_expect_success 'revert fourth fourth~1 fourth~2 works' '
+	git checkout -f master &&
+	git reset --hard fourth &&
+	test_tick &&
+	git revert fourth fourth~1 fourth~2 &&
+	git diff --quiet first &&
+	git diff --cached --quiet first &&
+	git diff --quiet HEAD first
+'
+
+test_expect_success 'cherry-pick -3 fourth works' '
+	git checkout -f master &&
+	git reset --hard first &&
+	test_tick &&
+	git cherry-pick -3 fourth &&
+	git diff --quiet other &&
+	git diff --quiet HEAD other &&
+	test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
+'
+
+test_expect_success 'cherry-pick --stdin works' '
+	git checkout -f master &&
+	git reset --hard first &&
+	test_tick &&
+	git rev-list --reverse first..fourth | git cherry-pick --stdin &&
+	git diff --quiet other &&
+	git diff --quiet HEAD other &&
+	test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
+'
+
+test_done
diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh
index 8fe14cc..62e208a 100755
--- a/t/t3903-stash.sh
+++ b/t/t3903-stash.sh
@@ -81,7 +81,7 @@
 	git stash &&
 	git stash drop &&
 	git stash list > stashlist2 &&
-	diff stashlist1 stashlist2 &&
+	test_cmp stashlist1 stashlist2 &&
 	git stash apply &&
 	test 3 = $(cat file) &&
 	test 1 = $(git show :file) &&
diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh
index 18695ce..73441a5 100755
--- a/t/t4002-diff-basic.sh
+++ b/t/t4002-diff-basic.sh
@@ -135,7 +135,7 @@
     # filesystem.
     sed <"$2" >.test-tmp \
 	-e '/^:000000 /d;s/'$x40'\( [MCRNDU][0-9]*\)	/'$z40'\1	/' &&
-    diff "$1" .test-tmp
+    test_cmp "$1" .test-tmp
 }
 
 test_expect_success \
diff --git a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^
index 8dab4bf..1f0f9ad 100644
--- a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^
+++ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^
@@ -18,6 +18,9 @@
  create mode 100644 file1
  delete mode 100644 file2
 
+-- 
+g-i-t--v-e-r-s-i-o-n
+
 From 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 Mon Sep 17 00:00:00 2001
 From: A U Thor <author@example.com>
 Date: Mon, 26 Jun 2006 00:01:00 +0000
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh
index d21c37f..f87434b 100755
--- a/t/t4014-format-patch.sh
+++ b/t/t4014-format-patch.sh
@@ -613,4 +613,56 @@
 	git format-patch --ignore-if-in-upstream HEAD
 '
 
+test_expect_success 'format-patch --signature' '
+	git format-patch --stdout --signature="my sig" -1 >output &&
+	grep "my sig" output
+'
+
+test_expect_success 'format-patch with format.signature config' '
+	git config format.signature "config sig" &&
+	git format-patch --stdout -1 >output &&
+	grep "config sig" output
+'
+
+test_expect_success 'format-patch --signature overrides format.signature' '
+	git config format.signature "config sig" &&
+	git format-patch --stdout --signature="overrides" -1 >output &&
+	! grep "config sig" output &&
+	grep "overrides" output
+'
+
+test_expect_success 'format-patch --no-signature ignores format.signature' '
+	git config format.signature "config sig" &&
+	git format-patch --stdout --signature="my sig" --no-signature \
+		-1 >output &&
+	! grep "config sig" output &&
+	! grep "my sig" output &&
+	! grep "^-- \$" output
+'
+
+test_expect_success 'format-patch --signature --cover-letter' '
+	git config --unset-all format.signature &&
+	git format-patch --stdout --signature="my sig" --cover-letter \
+		-1 >output &&
+	grep "my sig" output &&
+	test 2 = $(grep "my sig" output | wc -l)
+'
+
+test_expect_success 'format.signature="" supresses signatures' '
+	git config format.signature "" &&
+	git format-patch --stdout -1 >output &&
+	! grep "^-- \$" output
+'
+
+test_expect_success 'format-patch --no-signature supresses signatures' '
+	git config --unset-all format.signature &&
+	git format-patch --stdout --no-signature -1 >output &&
+	! grep "^-- \$" output
+'
+
+test_expect_success 'format-patch --signature="" supresses signatures' '
+	git format-patch --signature="" -1 >output &&
+	! grep "^-- \$" output
+'
+
 test_done
diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh
index 83c1914..1bd8e5e 100755
--- a/t/t4027-diff-submodule.sh
+++ b/t/t4027-diff-submodule.sh
@@ -103,7 +103,15 @@
 	git diff HEAD >actual &&
 	sed -e "1,/^@@/d" actual >actual.body &&
 	expect_from_to >expect.body $subprev $subprev-dirty &&
-	test_cmp expect.body actual.body
+	test_cmp expect.body actual.body &&
+	git diff --ignore-submodules HEAD >actual2 &&
+	! test -s actual2 &&
+	git diff --ignore-submodules=untracked HEAD >actual3 &&
+	sed -e "1,/^@@/d" actual3 >actual3.body &&
+	expect_from_to >expect.body $subprev $subprev-dirty &&
+	test_cmp expect.body actual3.body &&
+	git diff --ignore-submodules=dirty HEAD >actual4 &&
+	! test -s actual4
 '
 
 test_expect_success 'git diff HEAD with dirty submodule (index, refs match)' '
@@ -129,7 +137,13 @@
 	git diff HEAD >actual &&
 	sed -e "1,/^@@/d" actual >actual.body &&
 	expect_from_to >expect.body $subprev $subprev-dirty &&
-	test_cmp expect.body actual.body
+	test_cmp expect.body actual.body &&
+	git diff --ignore-submodules=all HEAD >actual2 &&
+	! test -s actual2 &&
+	git diff --ignore-submodules=untracked HEAD >actual3 &&
+	! test -s actual3 &&
+	git diff --ignore-submodules=dirty HEAD >actual4 &&
+	! test -s actual4
 '
 
 test_expect_success 'git diff (empty submodule dir)' '
diff --git a/t/t4041-diff-submodule.sh b/t/t4041-diff-submodule-option.sh
similarity index 74%
rename from t/t4041-diff-submodule.sh
rename to t/t4041-diff-submodule-option.sh
index 019acb9..8e391cf 100755
--- a/t/t4041-diff-submodule.sh
+++ b/t/t4041-diff-submodule-option.sh
@@ -205,6 +205,21 @@
 EOF
 "
 
+test_expect_success 'submodule contains untracked content (untracked ignored)' "
+	git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
+test_expect_success 'submodule contains untracked content (dirty ignored)' "
+	git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
+test_expect_success 'submodule contains untracked content (all ignored)' "
+	git diff-index -p --ignore-submodules=all --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
 test_expect_success 'submodule contains untracked and modifed content' "
 	echo new > sm1/foo6 &&
 	git diff-index -p --submodule=log HEAD >actual &&
@@ -214,6 +229,26 @@
 EOF
 "
 
+test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' "
+	echo new > sm1/foo6 &&
+	git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual &&
+	diff actual - <<-EOF
+Submodule sm1 contains modified content
+EOF
+"
+
+test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' "
+	echo new > sm1/foo6 &&
+	git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
+test_expect_success 'submodule contains untracked and modifed content (all ignored)' "
+	echo new > sm1/foo6 &&
+	git diff-index -p --ignore-submodules --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
 test_expect_success 'submodule contains modifed content' "
 	rm -f sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
@@ -242,6 +277,27 @@
 EOF
 "
 
+test_expect_success 'modified submodule contains untracked content (untracked ignored)' "
+	git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual &&
+	diff actual - <<-EOF
+Submodule sm1 $head6..$head8:
+  > change
+EOF
+"
+
+test_expect_success 'modified submodule contains untracked content (dirty ignored)' "
+	git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual &&
+	diff actual - <<-EOF
+Submodule sm1 $head6..$head8:
+  > change
+EOF
+"
+
+test_expect_success 'modified submodule contains untracked content (all ignored)' "
+	git diff-index -p --ignore-submodules=all --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
 test_expect_success 'modified submodule contains untracked and modifed content' "
 	echo modification >> sm1/foo6 &&
 	git diff-index -p --submodule=log HEAD >actual &&
@@ -253,6 +309,31 @@
 EOF
 "
 
+test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' "
+	echo modification >> sm1/foo6 &&
+	git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual &&
+	diff actual - <<-EOF
+Submodule sm1 contains modified content
+Submodule sm1 $head6..$head8:
+  > change
+EOF
+"
+
+test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' "
+	echo modification >> sm1/foo6 &&
+	git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual &&
+	diff actual - <<-EOF
+Submodule sm1 $head6..$head8:
+  > change
+EOF
+"
+
+test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' "
+	echo modification >> sm1/foo6 &&
+	git diff-index -p --ignore-submodules --submodule=log HEAD >actual &&
+	! test -s actual
+"
+
 test_expect_success 'modified submodule contains modifed content' "
 	rm -f sm1/new-file &&
 	git diff-index -p --submodule=log HEAD >actual &&
diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh
index d0af697..8a676a5 100755
--- a/t/t4124-apply-ws-rule.sh
+++ b/t/t4124-apply-ws-rule.sh
@@ -44,7 +44,7 @@
 	apply_patch --whitespace=fix || return 1
 
 	# find touched lines
-	diff file target | sed -n -e "s/^> //p" >fixed
+	$DIFF file target | sed -n -e "s/^> //p" >fixed
 
 	# the changed lines are all expeced to change
 	fixed_cnt=$(wc -l <fixed)
@@ -85,14 +85,14 @@
 test_expect_success 'whitespace=nowarn, default rule' '
 
 	apply_patch --whitespace=nowarn &&
-	diff file target
+	test_cmp file target
 
 '
 
 test_expect_success 'whitespace=warn, default rule' '
 
 	apply_patch --whitespace=warn &&
-	diff file target
+	test_cmp file target
 
 '
 
@@ -108,7 +108,7 @@
 
 	git config core.whitespace -trailing,-space-before,-indent &&
 	apply_patch --whitespace=error-all &&
-	diff file target
+	test_cmp file target
 
 '
 
@@ -117,7 +117,7 @@
 	git config --unset core.whitespace &&
 	echo "target -whitespace" >.gitattributes &&
 	apply_patch --whitespace=error-all &&
-	diff file target
+	test_cmp file target
 
 '
 
diff --git a/t/t4127-apply-same-fn.sh b/t/t4127-apply-same-fn.sh
index 3a8202e..77200c0 100755
--- a/t/t4127-apply-same-fn.sh
+++ b/t/t4127-apply-same-fn.sh
@@ -27,7 +27,7 @@
 	cp same_fn same_fn2 &&
 	git reset --hard &&
 	git apply patch0 &&
-	diff same_fn same_fn2
+	test_cmp same_fn same_fn2
 '
 
 test_expect_success 'apply same filename with overlapping changes' '
@@ -40,7 +40,7 @@
 	cp same_fn same_fn2 &&
 	git reset --hard &&
 	git apply patch0 &&
-	diff same_fn same_fn2
+	test_cmp same_fn same_fn2
 '
 
 test_expect_success 'apply same new filename after rename' '
@@ -54,7 +54,7 @@
 	cp new_fn new_fn2 &&
 	git reset --hard &&
 	git apply --index patch1 &&
-	diff new_fn new_fn2
+	test_cmp new_fn new_fn2
 '
 
 test_expect_success 'apply same old filename after rename -- should fail.' '
diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh
index 169d3ea..9cc0a42 100755
--- a/t/t5150-request-pull.sh
+++ b/t/t5150-request-pull.sh
@@ -67,7 +67,7 @@
 
 	cat <<-\EOT >read-request.sed &&
 	#!/bin/sed -nf
-	/ in the git repository at:$/! d
+	/ in the git repository at:$/!d
 	n
 	/^$/ n
 	s/^[ 	]*\(.*\) \([^ ]*\)/please pull\
@@ -102,7 +102,7 @@
 	/^        [a-zA-Z]/ n
 	/^[a-zA-Z]* ([0-9]*):\$/ n
 	/^\$/ N
-	/^\n[a-zA-Z]* ([0-9]*):\$/! {
+	/^\n[a-zA-Z]* ([0-9]*):\$/!{
 		a\\
 	SHORTLOG
 		D
diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh
index 7649b81..bbb9c12 100755
--- a/t/t5300-pack-object.sh
+++ b/t/t5300-pack-object.sh
@@ -147,7 +147,7 @@
 	    git cat-file $t $object || return 1
 	 done <obj-list
     } >current &&
-    diff expect current'
+    test_cmp expect current'
 
 test_expect_success \
     'use packed deltified (REF_DELTA) objects' \
@@ -162,7 +162,7 @@
 	    git cat-file $t $object || return 1
 	 done <obj-list
     } >current &&
-    diff expect current'
+    test_cmp expect current'
 
 test_expect_success \
     'use packed deltified (OFS_DELTA) objects' \
@@ -177,7 +177,7 @@
 	    git cat-file $t $object || return 1
 	 done <obj-list
     } >current &&
-    diff expect current'
+    test_cmp expect current'
 
 unset GIT_OBJECT_DIRECTORY
 
diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh
index 721821e..4eb10f6 100755
--- a/t/t5510-fetch.sh
+++ b/t/t5510-fetch.sh
@@ -71,7 +71,7 @@
 		echo "$one_in_two	"
 	} >expected &&
 	cut -f -2 .git/FETCH_HEAD >actual &&
-	diff expected actual'
+	test_cmp expected actual'
 
 test_expect_success 'fetch tags when there is no tags' '
 
diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index dd2ee84..319e389 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -26,7 +26,7 @@
 test_expect_success 'checking the results' '
 	test -f file &&
 	test -f cloned/file &&
-	diff file cloned/file
+	test_cmp file cloned/file
 '
 
 test_expect_success 'pulling into void using master:master' '
diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh
index a696b87..044603c 100755
--- a/t/t5530-upload-pack-error.sh
+++ b/t/t5530-upload-pack-error.sh
@@ -32,9 +32,9 @@
 
 test_expect_success 'upload-pack fails due to error in pack-objects packing' '
 
-	! echo "0032want $(git rev-parse HEAD)
-00000009done
-0000" | git upload-pack . > /dev/null 2> output.err &&
+	printf "0032want %s\n00000009done\n0000" \
+		$(git rev-parse HEAD) >input &&
+	test_must_fail git upload-pack . <input >/dev/null 2>output.err &&
 	grep "unable to read" output.err &&
 	grep "pack-objects died" output.err
 '
@@ -51,9 +51,9 @@
 '
 test_expect_success 'upload-pack fails due to error in rev-list' '
 
-	! echo "0032want $(git rev-parse HEAD)
-0034shallow $(git rev-parse HEAD^)00000009done
-0000" | git upload-pack . > /dev/null 2> output.err &&
+	printf "0032want %s\n0034shallow %s00000009done\n0000" \
+		$(git rev-parse HEAD) $(git rev-parse HEAD^) >input &&
+	test_must_fail git upload-pack . <input >/dev/null 2>output.err &&
 	# pack-objects survived
 	grep "Total.*, reused" output.err &&
 	# but there was an error, which must have been in rev-list
@@ -62,9 +62,9 @@
 
 test_expect_success 'upload-pack fails due to error in pack-objects enumeration' '
 
-	! echo "0032want $(git rev-parse HEAD)
-00000009done
-0000" | git upload-pack . > /dev/null 2> output.err &&
+	printf "0032want %s\n00000009done\n0000" \
+		$(git rev-parse HEAD) >input &&
+	test_must_fail git upload-pack . <input >/dev/null 2>output.err &&
 	grep "bad tree object" output.err &&
 	grep "pack-objects died" output.err
 '
diff --git a/t/t5700-clone-reference.sh b/t/t5700-clone-reference.sh
index 1c10916..895f559 100755
--- a/t/t5700-clone-reference.sh
+++ b/t/t5700-clone-reference.sh
@@ -48,7 +48,7 @@
 'cd C &&
 echo "0 objects, 0 kilobytes" > expected &&
 git count-objects > current &&
-diff expected current'
+test_cmp expected current'
 
 cd "$base_dir"
 
@@ -75,7 +75,7 @@
 test_expect_success 'that reference gets used' \
 'cd D && echo "0 objects, 0 kilobytes" > expected &&
 git count-objects > current &&
-diff expected current'
+test_cmp expected current'
 
 cd "$base_dir"
 
@@ -100,7 +100,7 @@
 'cd C &&
 echo "2 objects" > expected &&
 git count-objects | cut -d, -f1 > current &&
-diff expected current'
+test_cmp expected current'
 
 cd "$base_dir"
 
@@ -116,7 +116,7 @@
 'cd D &&
 echo "5 objects" > expected &&
 git count-objects | cut -d, -f1 > current &&
-diff expected current'
+test_cmp expected current'
 
 cd "$base_dir"
 
diff --git a/t/t5800-remote-helpers.sh b/t/t5800-remote-helpers.sh
index 75a0163..4ee7b65 100755
--- a/t/t5800-remote-helpers.sh
+++ b/t/t5800-remote-helpers.sh
@@ -7,9 +7,15 @@
 
 . ./test-lib.sh
 
-if ! test_have_prereq PYTHON
+if test_have_prereq PYTHON && "$PYTHON_PATH" -c '
+import sys
+if sys.hexversion < 0x02040000:
+    sys.exit(1)
+'
 then
-	say 'skipping git remote-testgit tests: requires Python support'
+	:
+else
+	say 'skipping git remote-testgit tests: requires Python 2.4 or newer'
 	test_done
 fi
 
diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh
index b2131cd..fc57e7d 100755
--- a/t/t6001-rev-list-graft.sh
+++ b/t/t6001-rev-list-graft.sh
@@ -84,7 +84,7 @@
 		git rev-list --parents --pretty=raw $arg |
 		sed -n -e 's/^commit //p' >test.actual
 	fi
-	diff test.expect test.actual
+	test_cmp test.expect test.actual
 }
 
 for type in basic parents parents-raw
diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh
index 9b77073..cccacd4 100755
--- a/t/t6006-rev-list-format.sh
+++ b/t/t6006-rev-list-format.sh
@@ -200,6 +200,16 @@
 	grep "^$" actual
 '
 
+test_expect_success 'add SP before non-empty (1)' '
+	git show -s --pretty=format:"%s% bThanks" HEAD^^ >actual &&
+	test $(wc -w <actual) = 2
+'
+
+test_expect_success 'add SP before non-empty (2)' '
+	git show -s --pretty=format:"%s% sThanks" HEAD^^ >actual &&
+	test $(wc -w <actual) = 4
+'
+
 test_expect_success '--abbrev' '
 	echo SHORT SHORT SHORT >expect2 &&
 	echo LONG LONG LONG >expect3 &&
diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh
index 4b8611c..b565638 100755
--- a/t/t6007-rev-list-cherry-pick-file.sh
+++ b/t/t6007-rev-list-cherry-pick-file.sh
@@ -32,6 +32,23 @@
 	git tag B
 '
 
+cat >expect <<EOF
+<tags/B
+>tags/C
+EOF
+
+test_expect_success '--left-right' '
+	git rev-list --left-right B...C > actual &&
+	git name-rev --stdin --name-only --refs="*tags/*" \
+		< actual > actual.named &&
+	test_cmp actual.named expect
+'
+
+test_expect_success '--count' '
+	git rev-list --count B...C > actual &&
+	test "$(cat actual)" = 2
+'
+
 test_expect_success '--cherry-pick foo comes up empty' '
 	test -z "$(git rev-list --left-right --cherry-pick B...C -- foo)"
 '
@@ -54,4 +71,16 @@
 		HEAD...master -- foo)"
 '
 
+cat >expect <<EOF
+1	2
+EOF
+
+# Insert an extra commit to break the symmetry
+test_expect_success '--count --left-right' '
+	git checkout branch &&
+	test_commit D &&
+	git rev-list --count --left-right B...D > actual &&
+	test_cmp expect actual
+'
+
 test_done
diff --git a/t/t6018-rev-list-glob.sh b/t/t6018-rev-list-glob.sh
index 8d3fa7d..58428d9 100755
--- a/t/t6018-rev-list-glob.sh
+++ b/t/t6018-rev-list-glob.sh
@@ -34,7 +34,9 @@
 	git checkout master &&
 	commit master2 &&
 	git tag foo/bar master &&
-	git update-ref refs/remotes/foo/baz master
+	commit master3 &&
+	git update-ref refs/remotes/foo/baz master &&
+	commit master4
 '
 
 test_expect_success 'rev-parse --glob=refs/heads/subspace/*' '
@@ -162,6 +164,13 @@
 	compare rev-list "subspace/one subspace/two" "--branches=subspace"
 
 '
+
+test_expect_success 'rev-list --branches' '
+
+	compare rev-list "master subspace-x someref other/three subspace/one subspace/two" "--branches"
+
+'
+
 test_expect_success 'rev-list --glob=heads/someref/* master' '
 
 	compare rev-list "master" "--glob=heads/someref/* master"
@@ -186,6 +195,12 @@
 
 '
 
+test_expect_success 'rev-list --tags' '
+
+	compare rev-list "foo/bar" "--tags"
+
+'
+
 test_expect_success 'rev-list --remotes=foo' '
 
 	compare rev-list "foo/baz" "--remotes=foo"
diff --git a/t/t6019-rev-list-ancestry-path.sh b/t/t6019-rev-list-ancestry-path.sh
new file mode 100755
index 0000000..7641029
--- /dev/null
+++ b/t/t6019-rev-list-ancestry-path.sh
@@ -0,0 +1,73 @@
+#!/bin/sh
+
+test_description='--ancestry-path'
+
+#          D---E-------F
+#         /     \       \
+#    B---C---G---H---I---J
+#   /                     \
+#  A-------K---------------L--M
+#
+#  D..M                 == E F G H I J K L M
+#  --ancestry-path D..M == E F H I J L M
+#
+#  D..M -- M.t                 == M
+#  --ancestry-path D..M -- M.t == M
+
+. ./test-lib.sh
+
+test_merge () {
+	test_tick &&
+	git merge -s ours -m "$2" "$1" &&
+	git tag "$2"
+}
+
+test_expect_success setup '
+	test_commit A &&
+	test_commit B &&
+	test_commit C &&
+	test_commit D &&
+	test_commit E &&
+	test_commit F &&
+	git reset --hard C &&
+	test_commit G &&
+	test_merge E H &&
+	test_commit I &&
+	test_merge F J &&
+	git reset --hard A &&
+	test_commit K &&
+	test_merge J L &&
+	test_commit M
+'
+
+test_expect_success 'rev-list D..M' '
+	for c in E F G H I J K L M; do echo $c; done >expect &&
+	git rev-list --format=%s D..M |
+	sed -e "/^commit /d" |
+	sort >actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'rev-list --ancestry-path D..M' '
+	for c in E F H I J L M; do echo $c; done >expect &&
+	git rev-list --ancestry-path --format=%s D..M |
+	sed -e "/^commit /d" |
+	sort >actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'rev-list D..M -- M.t' '
+	echo M >expect &&
+	git rev-list --format=%s D..M -- M.t |
+	sed -e "/^commit /d" >actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'rev-list --ancestry-patch D..M -- M.t' '
+	echo M >expect &&
+	git rev-list --ancestry-path --format=%s D..M -- M.t |
+	sed -e "/^commit /d" >actual &&
+	test_cmp expect actual
+'
+
+test_done
diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh
index e3f7ae8..b66544b 100755
--- a/t/t6022-merge-rename.sh
+++ b/t/t6022-merge-rename.sh
@@ -280,7 +280,7 @@
 		echo "BAD: should have complained"
 		return 1
 	}
-	diff M M.saved || {
+	test_cmp M M.saved || {
 		echo "BAD: should have left M intact"
 		return 1
 	}
@@ -301,7 +301,7 @@
 		echo "BAD: should have complained"
 		return 1
 	}
-	diff M M.saved || {
+	test_cmp M M.saved || {
 		echo "BAD: should have left M intact"
 		return 1
 	}
diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh
index 5257f4d..fe60d69 100755
--- a/t/t7005-editor.sh
+++ b/t/t7005-editor.sh
@@ -13,7 +13,7 @@
 
 '
 
-if ! expr "$vi" : '^[a-z]*$' >/dev/null
+if ! expr "$vi" : '[a-z]*$' >/dev/null
 then
 	vi=
 fi
@@ -38,7 +38,7 @@
 	test_commit "$msg" &&
 	echo "$msg" >expect &&
 	git show -s --format=%s > actual &&
-	diff actual expect
+	test_cmp actual expect
 
 '
 
@@ -85,7 +85,7 @@
 		git --exec-path=. commit --amend &&
 		git show -s --pretty=oneline |
 		sed -e "s/^[0-9a-f]* //" >actual &&
-		diff actual expect
+		test_cmp actual expect
 	'
 done
 
@@ -107,7 +107,7 @@
 		git --exec-path=. commit --amend &&
 		git show -s --pretty=oneline |
 		sed -e "s/^[0-9a-f]* //" >actual &&
-		diff actual expect
+		test_cmp actual expect
 	'
 done
 
diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh
index 3bc7a2a..c2a3c8e 100755
--- a/t/t7006-pager.sh
+++ b/t/t7006-pager.sh
@@ -3,6 +3,7 @@
 test_description='Test automatic use of a pager.'
 
 . ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-pager.sh
 
 cleanup_fail() {
 	echo >&2 cleanup failed
@@ -40,7 +41,7 @@
 fi
 
 test_expect_success 'setup' '
-	unset GIT_PAGER GIT_PAGER_IN_USE &&
+	unset GIT_PAGER GIT_PAGER_IN_USE;
 	test_might_fail git config --unset core.pager &&
 
 	PAGER="cat >paginated.out" &&
@@ -109,7 +110,7 @@
 # for the first color; the text "commit" comes later.
 colorful() {
 	read firstline <$1
-	! expr "$firstline" : "^[a-zA-Z]" >/dev/null
+	! expr "$firstline" : "[a-zA-Z]" >/dev/null
 }
 
 test_expect_success 'tests can detect color' '
@@ -158,22 +159,13 @@
 	colorful colorful.log
 '
 
-test_expect_success 'determine default pager' '
-	unset PAGER GIT_PAGER &&
-	test_might_fail git config --unset core.pager ||
-	cleanup_fail &&
-
-	less=$(git var GIT_PAGER) &&
-	test -n "$less"
-'
-
-if expr "$less" : '^[a-z][a-z]*$' >/dev/null && test_have_prereq TTY
+if test_have_prereq SIMPLEPAGER && test_have_prereq TTY
 then
-	test_set_prereq SIMPLEPAGER
+	test_set_prereq SIMPLEPAGERTTY
 fi
 
-test_expect_success SIMPLEPAGER 'default pager is used by default' '
-	unset PAGER GIT_PAGER &&
+test_expect_success SIMPLEPAGERTTY 'default pager is used by default' '
+	unset PAGER GIT_PAGER;
 	test_might_fail git config --unset core.pager &&
 	rm -f default_pager_used ||
 	cleanup_fail &&
@@ -192,7 +184,7 @@
 '
 
 test_expect_success TTY 'PAGER overrides default pager' '
-	unset GIT_PAGER &&
+	unset GIT_PAGER;
 	test_might_fail git config --unset core.pager &&
 	rm -f PAGER_used ||
 	cleanup_fail &&
@@ -204,7 +196,7 @@
 '
 
 test_expect_success TTY 'core.pager overrides PAGER' '
-	unset GIT_PAGER &&
+	unset GIT_PAGER;
 	rm -f core.pager_used ||
 	cleanup_fail &&
 
diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh
index 9504466..ac2e187 100755
--- a/t/t7502-commit.sh
+++ b/t/t7502-commit.sh
@@ -4,8 +4,76 @@
 
 . ./test-lib.sh
 
+# Arguments: [<prefix] [<commit message>] [<commit options>]
+check_summary_oneline() {
+	test_tick &&
+	git commit ${3+"$3"} -m "$2" | head -1 > act &&
+
+	# branch name
+	SUMMARY_PREFIX="$(git name-rev --name-only HEAD)" &&
+
+	# append the "special" prefix, like "root-commit", "detached HEAD"
+	if test -n "$1"
+	then
+		SUMMARY_PREFIX="$SUMMARY_PREFIX ($1)"
+	fi
+
+	# abbrev SHA-1
+	SUMMARY_POSTFIX="$(git log -1 --pretty='format:%h')"
+	echo "[$SUMMARY_PREFIX $SUMMARY_POSTFIX] $2" >exp &&
+
+	test_cmp exp act
+}
+
+test_expect_success 'output summary format' '
+
+	echo new >file1 &&
+	git add file1 &&
+	check_summary_oneline "root-commit" "initial" &&
+
+	echo change >>file1 &&
+	git add file1 &&
+	check_summary_oneline "" "a change"
+'
+
+test_expect_success 'output summary format for commit with an empty diff' '
+
+	check_summary_oneline "" "empty" "--allow-empty"
+'
+
+test_expect_success 'output summary format for merges' '
+
+	git checkout -b recursive-base &&
+	test_commit base file1 &&
+
+	git checkout -b recursive-a recursive-base &&
+	test_commit commit-a file1 &&
+
+	git checkout -b recursive-b recursive-base &&
+	test_commit commit-b file1 &&
+
+	# conflict
+	git checkout recursive-a &&
+	test_must_fail git merge recursive-b &&
+	# resolve the conflict
+	echo commit-a > file1 &&
+	git add file1 &&
+	check_summary_oneline "" "Merge"
+'
+
+output_tests_cleanup() {
+	# this is needed for "do not fire editor in the presence of conflicts"
+	git checkout master &&
+
+	# this is needed for the "partial removal" test to pass
+	git rm file1 &&
+	git commit -m "cleanup"
+}
+
 test_expect_success 'the basics' '
 
+	output_tests_cleanup &&
+
 	echo doing partial >"commit is" &&
 	mkdir not &&
 	echo very much encouraged but we should >not/forbid &&
diff --git a/t/t7508-status.sh b/t/t7508-status.sh
index 9e08107..a72fe3a 100755
--- a/t/t7508-status.sh
+++ b/t/t7508-status.sh
@@ -808,4 +808,131 @@
 	(exit $status)
 '
 
+cat > expect << EOF
+# On branch master
+# Changed but not updated:
+#   (use "git add <file>..." to update what will be committed)
+#   (use "git checkout -- <file>..." to discard changes in working directory)
+#
+#	modified:   dir1/modified
+#
+# Untracked files:
+#   (use "git add <file>..." to include in what will be committed)
+#
+#	dir1/untracked
+#	dir2/modified
+#	dir2/untracked
+#	expect
+#	output
+#	untracked
+no changes added to commit (use "git add" and/or "git commit -a")
+EOF
+
+test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' '
+	echo modified > sm/untracked &&
+	git status --ignore-submodules=untracked > output &&
+	test_cmp expect output
+'
+
+test_expect_success '--ignore-submodules=dirty suppresses submodules with untracked content' '
+	git status --ignore-submodules=dirty > output &&
+	test_cmp expect output
+'
+
+test_expect_success '--ignore-submodules=dirty suppresses submodules with modified content' '
+	echo modified > sm/foo &&
+	git status --ignore-submodules=dirty > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+# On branch master
+# Changed but not updated:
+#   (use "git add <file>..." to update what will be committed)
+#   (use "git checkout -- <file>..." to discard changes in working directory)
+#   (commit or discard the untracked or modified content in submodules)
+#
+#	modified:   dir1/modified
+#	modified:   sm (modified content)
+#
+# Untracked files:
+#   (use "git add <file>..." to include in what will be committed)
+#
+#	dir1/untracked
+#	dir2/modified
+#	dir2/untracked
+#	expect
+#	output
+#	untracked
+no changes added to commit (use "git add" and/or "git commit -a")
+EOF
+
+test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" '
+	git status --ignore-submodules=untracked > output &&
+	test_cmp expect output
+'
+
+head2=$(cd sm && git commit -q -m "2nd commit" foo && git rev-parse --short=7 --verify HEAD)
+
+cat > expect << EOF
+# On branch master
+# Changed but not updated:
+#   (use "git add <file>..." to update what will be committed)
+#   (use "git checkout -- <file>..." to discard changes in working directory)
+#
+#	modified:   dir1/modified
+#	modified:   sm (new commits)
+#
+# Submodules changed but not updated:
+#
+# * sm $head...$head2 (1):
+#   > 2nd commit
+#
+# Untracked files:
+#   (use "git add <file>..." to include in what will be committed)
+#
+#	dir1/untracked
+#	dir2/modified
+#	dir2/untracked
+#	expect
+#	output
+#	untracked
+no changes added to commit (use "git add" and/or "git commit -a")
+EOF
+
+test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" '
+	git status --ignore-submodules=untracked > output &&
+	test_cmp expect output
+'
+
+test_expect_success "--ignore-submodules=dirty doesn't suppress submodule summary" '
+	git status --ignore-submodules=dirty > output &&
+	test_cmp expect output
+'
+
+cat > expect << EOF
+# On branch master
+# Changed but not updated:
+#   (use "git add <file>..." to update what will be committed)
+#   (use "git checkout -- <file>..." to discard changes in working directory)
+#
+#	modified:   dir1/modified
+#
+# Untracked files:
+#   (use "git add <file>..." to include in what will be committed)
+#
+#	dir1/untracked
+#	dir2/modified
+#	dir2/untracked
+#	expect
+#	output
+#	untracked
+no changes added to commit (use "git add" and/or "git commit -a")
+EOF
+
+test_expect_success "--ignore-submodules=all suppresses submodule summary" '
+	git status --ignore-submodules=all > output &&
+	test_cmp expect output
+'
+
 test_done
diff --git a/t/t7002-grep.sh b/t/t7810-grep.sh
similarity index 97%
rename from t/t7002-grep.sh
rename to t/t7810-grep.sh
index e249c3e..8a63227 100755
--- a/t/t7002-grep.sh
+++ b/t/t7810-grep.sh
@@ -60,7 +60,7 @@
 			echo ${HC}file:5:foo_mmap bar mmap baz
 		} >expected &&
 		git grep -n -w -e mmap $H >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep -w $L (w)" '
@@ -74,7 +74,7 @@
 			echo ${HC}x:1:x x xx x
 		} >expected &&
 		git grep -n -w -e "x xx* x" $H >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep -w $L (y-1)" '
@@ -82,7 +82,7 @@
 			echo ${HC}y:1:y yy
 		} >expected &&
 		git grep -n -w -e "^y" $H >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep -w $L (y-2)" '
@@ -93,7 +93,7 @@
 			cat actual
 			false
 		else
-			diff expected actual
+			test_cmp expected actual
 		fi
 	'
 
@@ -105,14 +105,14 @@
 			cat actual
 			false
 		else
-			diff expected actual
+			test_cmp expected actual
 		fi
 	'
 
 	test_expect_success "grep $L (t-1)" '
 		echo "${HC}t/t:1:test" >expected &&
 		git grep -n -e test $H >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep $L (t-2)" '
@@ -121,7 +121,7 @@
 			cd t &&
 			git grep -n -e test $H
 		) >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep $L (t-3)" '
@@ -130,7 +130,7 @@
 			cd t &&
 			git grep --full-name -n -e test $H
 		) >actual &&
-		diff expected actual
+		test_cmp expected actual
 	'
 
 	test_expect_success "grep -c $L (no /dev/null)" '
diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh
new file mode 100755
index 0000000..c110441
--- /dev/null
+++ b/t/t7811-grep-open.sh
@@ -0,0 +1,153 @@
+#!/bin/sh
+
+test_description='git grep --open-files-in-pager
+'
+
+. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-pager.sh
+unset PAGER GIT_PAGER
+
+test_expect_success 'setup' '
+	test_commit initial grep.h "
+enum grep_pat_token {
+	GREP_PATTERN,
+	GREP_PATTERN_HEAD,
+	GREP_PATTERN_BODY,
+	GREP_AND,
+	GREP_OPEN_PAREN,
+	GREP_CLOSE_PAREN,
+	GREP_NOT,
+	GREP_OR,
+};" &&
+
+	test_commit add-user revision.c "
+	}
+	if (seen_dashdash)
+		read_pathspec_from_stdin(revs, &sb, prune);
+	strbuf_release(&sb);
+}
+
+static void add_grep(struct rev_info *revs, const char *ptn, enum grep_pat_token what)
+{
+	append_grep_pattern(&revs->grep_filter, ptn, \"command line\", 0, what);
+" &&
+
+	mkdir subdir &&
+	test_commit subdir subdir/grep.c "enum grep_pat_token" &&
+
+	test_commit uninteresting unrelated "hello, world" &&
+
+	echo GREP_PATTERN >untracked
+'
+
+test_expect_success SIMPLEPAGER 'git grep -O' '
+	cat >$less <<-\EOF &&
+	#!/bin/sh
+	printf "%s\n" "$@" >pager-args
+	EOF
+	chmod +x $less &&
+	cat >expect.less <<-\EOF &&
+	+/*GREP_PATTERN
+	grep.h
+	EOF
+	echo grep.h >expect.notless &&
+	>empty &&
+
+	PATH=.:$PATH git grep -O GREP_PATTERN >out &&
+	{
+		test_cmp expect.less pager-args ||
+		test_cmp expect.notless pager-args
+	} &&
+	test_cmp empty out
+'
+
+test_expect_success 'git grep -O --cached' '
+	test_must_fail git grep --cached -O GREP_PATTERN >out 2>msg &&
+	grep open-files-in-pager msg
+'
+
+test_expect_success 'git grep -O --no-index' '
+	rm -f expect.less pager-args out &&
+	cat >expect <<-\EOF &&
+	grep.h
+	untracked
+	EOF
+	>empty &&
+
+	(
+		GIT_PAGER='\''printf "%s\n" >pager-args'\'' &&
+		export GIT_PAGER &&
+		git grep --no-index -O GREP_PATTERN >out
+	) &&
+	test_cmp expect pager-args &&
+	test_cmp empty out
+'
+
+test_expect_success 'setup: fake "less"' '
+	cat >less <<-\EOF &&
+	#!/bin/sh
+	printf "%s\n" "$@" >actual
+	EOF
+	chmod +x less
+'
+
+test_expect_success 'git grep -O jumps to line in less' '
+	cat >expect <<-\EOF &&
+	+/*GREP_PATTERN
+	grep.h
+	EOF
+	>empty &&
+
+	GIT_PAGER=./less git grep -O GREP_PATTERN >out &&
+	test_cmp expect actual &&
+	test_cmp empty out &&
+
+	git grep -O./less GREP_PATTERN >out2 &&
+	test_cmp expect actual &&
+	test_cmp empty out2
+'
+
+test_expect_success 'modified file' '
+	rm -f actual &&
+	cat >expect <<-\EOF &&
+	+/*enum grep_pat_token
+	grep.h
+	revision.c
+	subdir/grep.c
+	unrelated
+	EOF
+	>empty &&
+
+	echo "enum grep_pat_token" >unrelated &&
+	test_when_finished "git checkout HEAD unrelated" &&
+	GIT_PAGER=./less git grep -F -O "enum grep_pat_token" >out &&
+	test_cmp expect actual &&
+	test_cmp empty out
+'
+
+test_expect_success 'run from subdir' '
+	rm -f actual &&
+	echo grep.c >expect &&
+	>empty &&
+
+	(
+		cd subdir &&
+		export GIT_PAGER &&
+		GIT_PAGER='\''printf "%s\n" >../args'\'' &&
+		git grep -O "enum grep_pat_token" >../out &&
+		git grep -O"pwd >../dir; :" "enum grep_pat_token" >../out2
+	) &&
+	case $(cat dir) in
+	*subdir)
+		: good
+		;;
+	*)
+		false
+		;;
+	esac &&
+	test_cmp expect args &&
+	test_cmp empty out &&
+	test_cmp empty out2
+'
+
+test_done
diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh
new file mode 100755
index 0000000..9ad96d4
--- /dev/null
+++ b/t/t8006-blame-textconv.sh
@@ -0,0 +1,80 @@
+#!/bin/sh
+
+test_description='git blame textconv support'
+. ./test-lib.sh
+
+find_blame() {
+	sed -e 's/^[^(]*//'
+}
+
+cat >helper <<'EOF'
+#!/bin/sh
+sed 's/^/converted: /' "$@"
+EOF
+chmod +x helper
+
+test_expect_success 'setup ' '
+	echo test 1 >one.bin &&
+	echo test number 2 >two.bin &&
+	git add . &&
+	GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" &&
+	echo test 1 version 2 >one.bin &&
+	echo test number 2 version 2 >>two.bin &&
+	GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00"
+'
+
+cat >expected <<EOF
+(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2
+EOF
+
+test_expect_success 'no filter specified' '
+	git blame one.bin >blame &&
+	find_blame Number2 <blame >result &&
+	test_cmp expected result
+'
+
+test_expect_success 'setup textconv filters' '
+	echo "*.bin diff=test" >.gitattributes &&
+	git config diff.test.textconv ./helper &&
+	git config diff.test.cachetextconv false
+'
+
+test_expect_success 'blame with --no-textconv' '
+	git blame --no-textconv one.bin >blame &&
+	find_blame <blame> result &&
+	test_cmp expected result
+'
+
+cat >expected <<EOF
+(Number2 2010-01-01 20:00:00 +0000 1) converted: test 1 version 2
+EOF
+
+test_expect_success 'basic blame on last commit' '
+	git blame one.bin >blame &&
+	find_blame  <blame >result &&
+	test_cmp expected result
+'
+
+cat >expected <<EOF
+(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2
+(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2
+EOF
+
+test_expect_success 'blame --textconv going through revisions' '
+	git blame --textconv two.bin >blame &&
+	find_blame <blame >result &&
+	test_cmp expected result
+'
+
+test_expect_success 'make a new commit' '
+	echo "test number 2 version 3" >>two.bin &&
+	GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00"
+'
+
+test_expect_success 'blame from previous revision' '
+	git blame HEAD^ two.bin >blame &&
+	find_blame <blame >result &&
+	test_cmp expected result
+'
+
+test_done
diff --git a/t/t8007-cat-file-textconv.sh b/t/t8007-cat-file-textconv.sh
new file mode 100755
index 0000000..38ac05e
--- /dev/null
+++ b/t/t8007-cat-file-textconv.sh
@@ -0,0 +1,70 @@
+#!/bin/sh
+
+test_description='git cat-file textconv support'
+. ./test-lib.sh
+
+cat >helper <<'EOF'
+#!/bin/sh
+sed 's/^/converted: /' "$@"
+EOF
+chmod +x helper
+
+test_expect_success 'setup ' '
+	echo test >one.bin &&
+	git add . &&
+	GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" &&
+	echo test version 2 >one.bin &&
+	GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00"
+'
+
+cat >expected <<EOF
+fatal: git cat-file --textconv: unable to run textconv on :one.bin
+EOF
+
+test_expect_success 'no filter specified' '
+	git cat-file --textconv :one.bin 2>result
+	test_cmp expected result
+'
+
+test_expect_success 'setup textconv filters' '
+	echo "*.bin diff=test" >.gitattributes &&
+	git config diff.test.textconv ./helper &&
+	git config diff.test.cachetextconv false
+'
+
+cat >expected <<EOF
+test version 2
+EOF
+
+test_expect_success 'cat-file without --textconv' '
+	git cat-file blob :one.bin >result &&
+	test_cmp expected result
+'
+
+cat >expected <<EOF
+test
+EOF
+
+test_expect_success 'cat-file without --textconv on previous commit' '
+	git cat-file -p HEAD^:one.bin >result &&
+	test_cmp expected result
+'
+
+cat >expected <<EOF
+converted: test version 2
+EOF
+
+test_expect_success 'cat-file --textconv on last commit' '
+	git cat-file --textconv :one.bin >result &&
+	test_cmp expected result
+'
+
+cat >expected <<EOF
+converted: test
+EOF
+
+test_expect_success 'cat-file --textconv on previous commit' '
+	git cat-file --textconv HEAD^:one.bin >result &&
+	test_cmp expected result
+'
+test_done
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index 640b3d2..382ab6c 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -918,4 +918,81 @@
 	! grep "RCPT TO:<other@ex.com>" stdout
 '
 
+cat >email-using-8bit <<EOF
+From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001
+Message-Id: <bogus-message-id@example.com>
+From: author@example.com
+Date: Sat, 12 Jun 2010 15:53:58 +0200
+Subject: subject goes here
+
+Dieser deutsche Text enthält einen Umlaut!
+EOF
+
+cat >content-type-decl <<EOF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+EOF
+
+test_expect_success 'asks about and fixes 8bit encodings' '
+	clean_fake_sendmail &&
+	echo |
+	git send-email --from=author@example.com --to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			email-using-8bit >stdout &&
+	grep "do not declare a Content-Transfer-Encoding" stdout &&
+	grep email-using-8bit stdout &&
+	grep "Which 8bit encoding" stdout &&
+	egrep "Content|MIME" msgtxt1 >actual &&
+	test_cmp actual content-type-decl
+'
+
+test_expect_success 'sendemail.8bitEncoding works' '
+	clean_fake_sendmail &&
+	git config sendemail.assume8bitEncoding UTF-8 &&
+	echo bogus |
+	git send-email --from=author@example.com --to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			email-using-8bit >stdout &&
+	egrep "Content|MIME" msgtxt1 >actual &&
+	test_cmp actual content-type-decl
+'
+
+test_expect_success '--8bit-encoding overrides sendemail.8bitEncoding' '
+	clean_fake_sendmail &&
+	git config sendemail.assume8bitEncoding "bogus too" &&
+	echo bogus |
+	git send-email --from=author@example.com --to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			--8bit-encoding=UTF-8 \
+			email-using-8bit >stdout &&
+	egrep "Content|MIME" msgtxt1 >actual &&
+	test_cmp actual content-type-decl
+'
+
+cat >email-using-8bit <<EOF
+From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001
+Message-Id: <bogus-message-id@example.com>
+From: author@example.com
+Date: Sat, 12 Jun 2010 15:53:58 +0200
+Subject: Dieser Betreff enthält auch einen Umlaut!
+
+Nothing to see here.
+EOF
+
+cat >expected <<EOF
+Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?=
+EOF
+
+test_expect_success '--8bit-encoding also treats subject' '
+	clean_fake_sendmail &&
+	echo bogus |
+	git send-email --from=author@example.com --to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			--8bit-encoding=UTF-8 \
+			email-using-8bit >stdout &&
+	grep "Subject" msgtxt1 >actual &&
+	test_cmp expected actual
+'
+
 test_done
diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh
index fc3795d..61bcb8f 100755
--- a/t/t9200-git-cvsexportcommit.sh
+++ b/t/t9200-git-cvsexportcommit.sh
@@ -63,10 +63,10 @@
      check_entries B "newfile2.txt/1.1/" &&
      check_entries C "newfile3.png/1.1/-kb" &&
      check_entries D "newfile4.png/1.1/-kb" &&
-     diff A/newfile1.txt ../A/newfile1.txt &&
-     diff B/newfile2.txt ../B/newfile2.txt &&
-     diff C/newfile3.png ../C/newfile3.png &&
-     diff D/newfile4.png ../D/newfile4.png
+     test_cmp A/newfile1.txt ../A/newfile1.txt &&
+     test_cmp B/newfile2.txt ../B/newfile2.txt &&
+     test_cmp C/newfile3.png ../C/newfile3.png &&
+     test_cmp D/newfile4.png ../D/newfile4.png
      )'
 
 test_expect_success \
@@ -89,10 +89,10 @@
      check_entries D "newfile4.png/1.2/-kb" &&
      check_entries E "newfile5.txt/1.1/" &&
      check_entries F "newfile6.png/1.1/-kb" &&
-     diff A/newfile1.txt ../A/newfile1.txt &&
-     diff D/newfile4.png ../D/newfile4.png &&
-     diff E/newfile5.txt ../E/newfile5.txt &&
-     diff F/newfile6.png ../F/newfile6.png
+     test_cmp A/newfile1.txt ../A/newfile1.txt &&
+     test_cmp D/newfile4.png ../D/newfile4.png &&
+     test_cmp E/newfile5.txt ../E/newfile5.txt &&
+     test_cmp F/newfile6.png ../F/newfile6.png
      )'
 
 # Should fail (but only on the git cvsexportcommit stage)
@@ -137,9 +137,9 @@
      check_entries D "" &&
      check_entries E "newfile5.txt/1.1/" &&
      check_entries F "newfile6.png/1.1/-kb" &&
-     diff A/newfile1.txt ../A/newfile1.txt &&
-     diff E/newfile5.txt ../E/newfile5.txt &&
-     diff F/newfile6.png ../F/newfile6.png
+     test_cmp A/newfile1.txt ../A/newfile1.txt &&
+     test_cmp E/newfile5.txt ../E/newfile5.txt &&
+     test_cmp F/newfile6.png ../F/newfile6.png
      )'
 
 test_expect_success \
@@ -155,8 +155,8 @@
      check_entries D "" &&
      check_entries E "newfile5.txt/1.1/" &&
      check_entries F "newfile6.png/1.1/-kb" &&
-     diff E/newfile5.txt ../E/newfile5.txt &&
-     diff F/newfile6.png ../F/newfile6.png
+     test_cmp E/newfile5.txt ../E/newfile5.txt &&
+     test_cmp F/newfile6.png ../F/newfile6.png
      )'
 
 test_expect_success \
diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh
index 437e9b8..8639506 100755
--- a/t/t9400-git-cvsserver-server.sh
+++ b/t/t9400-git-cvsserver-server.sh
@@ -449,7 +449,7 @@
     rm -f failures &&
     for i in merge no-lf empty really-empty; do
         GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out
-        diff $i.out ../$i >>failures 2>&1
+	test_cmp $i.out ../$i >>failures 2>&1
     done &&
     test -z "$(cat failures)"
 '
diff --git a/t/test-lib.sh b/t/test-lib.sh
index 454880a..367f053 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -75,7 +75,6 @@
 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
 export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
 export EDITOR
-GIT_TEST_CMP=${GIT_TEST_CMP:-diff -u}
 
 # Protect ourselves from common misconfiguration to export
 # CDPATH into the environment
@@ -740,6 +739,16 @@
 
 . ../GIT-BUILD-OPTIONS
 
+if test -z "$GIT_TEST_CMP"
+then
+	if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT"
+	then
+		GIT_TEST_CMP="$DIFF -c"
+	else
+		GIT_TEST_CMP="$DIFF -u"
+	fi
+fi
+
 GITPERLLIB=$(pwd)/../perl/blib/lib:$(pwd)/../perl/blib/arch/auto/Git
 export GITPERLLIB
 test -d ../templates/blt || {
diff --git a/transport-helper.c b/transport-helper.c
index 0381de5..191fbf7 100644
--- a/transport-helper.c
+++ b/transport-helper.c
@@ -727,10 +727,10 @@
 		private = apply_refspecs(data->refspecs, data->refspec_nr, ref->name);
 		if (private && !get_sha1(private, sha1)) {
 			strbuf_addf(&buf, "^%s", private);
-			string_list_append(strbuf_detach(&buf, NULL), &revlist_args);
+			string_list_append(&revlist_args, strbuf_detach(&buf, NULL));
 		}
 
-		string_list_append(ref->name, &revlist_args);
+		string_list_append(&revlist_args, ref->name);
 
 	}
 
diff --git a/unpack-trees.c b/unpack-trees.c
index 490cd5f..8cf0da3 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -279,9 +279,11 @@
 static int unpack_index_entry(struct cache_entry *ce,
 			      struct unpack_trees_options *o)
 {
-	struct cache_entry *src[5] = { ce, NULL, };
+	struct cache_entry *src[5] = { NULL };
 	int ret;
 
+	src[0] = ce;
+
 	mark_ce_used(ce, o);
 	if (ce_stage(ce)) {
 		if (o->skip_unmerged) {
@@ -520,9 +522,17 @@
 		const char *ce_name, *ce_slash;
 		int cmp, ce_len;
 
-		if (!ce_in_traverse_path(ce, info))
+		if (ce->ce_flags & CE_UNPACKED) {
+			/*
+			 * cache_bottom entry is already unpacked, so
+			 * we can never match it; don't check it
+			 * again.
+			 */
+			if (pos == o->cache_bottom)
+				++o->cache_bottom;
 			continue;
-		if (ce->ce_flags & CE_UNPACKED)
+		}
+		if (!ce_in_traverse_path(ce, info))
 			continue;
 		ce_name = ce->name + pfxlen;
 		ce_slash = strchr(ce_name, '/');
diff --git a/url.c b/url.c
index cd32b92..2306236 100644
--- a/url.c
+++ b/url.c
@@ -67,12 +67,10 @@
 	return val;
 }
 
-static char *url_decode_internal(const char **query, const char *stop_at)
+static char *url_decode_internal(const char **query, const char *stop_at, struct strbuf *out)
 {
 	const char *q = *query;
-	struct strbuf out;
 
-	strbuf_init(&out, 16);
 	do {
 		unsigned char c = *q;
 
@@ -86,33 +84,43 @@
 		if (c == '%') {
 			int val = url_decode_char(q + 1);
 			if (0 <= val) {
-				strbuf_addch(&out, val);
+				strbuf_addch(out, val);
 				q += 3;
 				continue;
 			}
 		}
 
 		if (c == '+')
-			strbuf_addch(&out, ' ');
+			strbuf_addch(out, ' ');
 		else
-			strbuf_addch(&out, c);
+			strbuf_addch(out, c);
 		q++;
 	} while (1);
 	*query = q;
-	return strbuf_detach(&out, NULL);
+	return strbuf_detach(out, NULL);
 }
 
 char *url_decode(const char *url)
 {
-	return url_decode_internal(&url, NULL);
+	struct strbuf out = STRBUF_INIT;
+	const char *colon = strchr(url, ':');
+
+	/* Skip protocol part if present */
+	if (colon && url < colon) {
+		strbuf_add(&out, url, colon - url);
+		url = colon;
+	}
+	return url_decode_internal(&url, NULL, &out);
 }
 
 char *url_decode_parameter_name(const char **query)
 {
-	return url_decode_internal(query, "&=");
+	struct strbuf out = STRBUF_INIT;
+	return url_decode_internal(query, "&=", &out);
 }
 
 char *url_decode_parameter_value(const char **query)
 {
-	return url_decode_internal(query, "&");
+	struct strbuf out = STRBUF_INIT;
+	return url_decode_internal(query, "&", &out);
 }
diff --git a/usage.c b/usage.c
index 79856a2..ec4cf53 100644
--- a/usage.c
+++ b/usage.c
@@ -5,7 +5,7 @@
  */
 #include "git-compat-util.h"
 
-static void report(const char *prefix, const char *err, va_list params)
+void vreportf(const char *prefix, const char *err, va_list params)
 {
 	char msg[4096];
 	vsnprintf(msg, sizeof(msg), err, params);
@@ -14,24 +14,24 @@
 
 static NORETURN void usage_builtin(const char *err, va_list params)
 {
-	report("usage: ", err, params);
+	vreportf("usage: ", err, params);
 	exit(129);
 }
 
 static NORETURN void die_builtin(const char *err, va_list params)
 {
-	report("fatal: ", err, params);
+	vreportf("fatal: ", err, params);
 	exit(128);
 }
 
 static void error_builtin(const char *err, va_list params)
 {
-	report("error: ", err, params);
+	vreportf("error: ", err, params);
 }
 
 static void warn_builtin(const char *warn, va_list params)
 {
-	report("warning: ", warn, params);
+	vreportf("warning: ", warn, params);
 }
 
 /* If we are in a dlopen()ed .so write to a global variable would segfault
diff --git a/wt-status.c b/wt-status.c
index 636ecdd..2f9e33c 100644
--- a/wt-status.c
+++ b/wt-status.c
@@ -10,6 +10,7 @@
 #include "run-command.h"
 #include "remote.h"
 #include "refs.h"
+#include "submodule.h"
 
 static char default_wt_status_colors[][COLOR_MAXLEN] = {
 	GIT_COLOR_NORMAL, /* WT_STATUS_HEADER */
@@ -235,7 +236,7 @@
 		struct wt_status_change_data *d;
 
 		p = q->queue[i];
-		it = string_list_insert(p->one->path, &s->change);
+		it = string_list_insert(&s->change, p->one->path);
 		d = it->util;
 		if (!d) {
 			d = xcalloc(1, sizeof(*d));
@@ -282,7 +283,7 @@
 		struct wt_status_change_data *d;
 
 		p = q->queue[i];
-		it = string_list_insert(p->two->path, &s->change);
+		it = string_list_insert(&s->change, p->two->path);
 		d = it->util;
 		if (!d) {
 			d = xcalloc(1, sizeof(*d));
@@ -312,6 +313,8 @@
 	DIFF_OPT_SET(&rev.diffopt, DIRTY_SUBMODULES);
 	if (!s->show_untracked_files)
 		DIFF_OPT_SET(&rev.diffopt, IGNORE_UNTRACKED_IN_SUBMODULES);
+	if (s->ignore_submodule_arg)
+		handle_ignore_submodules_arg(&rev.diffopt, s->ignore_submodule_arg);
 	rev.diffopt.format_callback = wt_status_collect_changed_cb;
 	rev.diffopt.format_callback_data = s;
 	rev.prune_data = s->pathspec;
@@ -328,6 +331,9 @@
 	opt.def = s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference;
 	setup_revisions(0, NULL, &rev, &opt);
 
+	if (s->ignore_submodule_arg)
+		handle_ignore_submodules_arg(&rev.diffopt, s->ignore_submodule_arg);
+
 	rev.diffopt.output_format |= DIFF_FORMAT_CALLBACK;
 	rev.diffopt.format_callback = wt_status_collect_updated_cb;
 	rev.diffopt.format_callback_data = s;
@@ -349,7 +355,7 @@
 
 		if (!ce_path_match(ce, s->pathspec))
 			continue;
-		it = string_list_insert(ce->name, &s->change);
+		it = string_list_insert(&s->change, ce->name);
 		d = it->util;
 		if (!d) {
 			d = xcalloc(1, sizeof(*d));
@@ -384,7 +390,7 @@
 			continue;
 		if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
 			continue;
-		string_list_insert(ent->name, &s->untracked);
+		string_list_insert(&s->untracked, ent->name);
 		free(ent);
 	}
 
@@ -398,7 +404,7 @@
 				continue;
 			if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
 				continue;
-			string_list_insert(ent->name, &s->ignored);
+			string_list_insert(&s->ignored, ent->name);
 			free(ent);
 		}
 	}
@@ -521,17 +527,18 @@
 	struct child_process sm_summary;
 	char summary_limit[64];
 	char index[PATH_MAX];
-	const char *env[] = { index, NULL };
-	const char *argv[] = {
-		"submodule",
-		"summary",
-		uncommitted ? "--files" : "--cached",
-		"--for-status",
-		"--summary-limit",
-		summary_limit,
-		uncommitted ? NULL : (s->amend ? "HEAD^" : "HEAD"),
-		NULL
-	};
+	const char *env[] = { NULL, NULL };
+	const char *argv[8];
+
+	env[0] =	index;
+	argv[0] =	"submodule";
+	argv[1] =	"summary";
+	argv[2] =	uncommitted ? "--files" : "--cached";
+	argv[3] =	"--for-status";
+	argv[4] =	"--summary-limit";
+	argv[5] =	summary_limit;
+	argv[6] =	uncommitted ? NULL : (s->amend ? "HEAD^" : "HEAD");
+	argv[7] =	NULL;
 
 	sprintf(summary_limit, "%d", s->submodule_summary);
 	snprintf(index, sizeof(index), "GIT_INDEX_FILE=%s", s->index_file);
@@ -645,7 +652,9 @@
 	wt_status_print_updated(s);
 	wt_status_print_unmerged(s);
 	wt_status_print_changed(s);
-	if (s->submodule_summary) {
+	if (s->submodule_summary &&
+	    (!s->ignore_submodule_arg ||
+	     strcmp(s->ignore_submodule_arg, "all"))) {
 		wt_status_print_submodule_summary(s, 0);  /* staged */
 		wt_status_print_submodule_summary(s, 1);  /* unstaged */
 	}
diff --git a/wt-status.h b/wt-status.h
index 4f19045..9df9c9f 100644
--- a/wt-status.h
+++ b/wt-status.h
@@ -13,7 +13,7 @@
 	WT_STATUS_NOBRANCH,
 	WT_STATUS_UNMERGED,
 	WT_STATUS_LOCAL_BRANCH,
-	WT_STATUS_REMOTE_BRANCH,
+	WT_STATUS_REMOTE_BRANCH
 };
 
 enum untracked_status_type {
@@ -45,6 +45,7 @@
 	int submodule_summary;
 	int show_ignored_files;
 	enum untracked_status_type show_untracked_files;
+	const char *ignore_submodule_arg;
 	char color_palette[WT_STATUS_REMOTE_BRANCH+1][COLOR_MAXLEN];
 
 	/* These are computed during processing of the individual sections */