diff --git a/po/de.po b/po/de.po
index 23829ef..70d8418 100644
--- a/po/de.po
+++ b/po/de.po
@@ -7,7 +7,7 @@
 msgstr ""
 "Project-Id-Version: git 1.7.11\n"
 "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2012-06-02 07:03+0800\n"
+"POT-Creation-Date: 2012-06-08 10:20+0800\n"
 "PO-Revision-Date: 2012-03-28 18:46+0200\n"
 "Last-Translator: Ralf Thielow <ralf.thielow@googlemail.com>\n"
 "Language-Team: German\n"
@@ -4929,6 +4929,32 @@
 msgid "You need to set your committer info first"
 msgstr "Du musst zuerst die Informationen des Eintragenden setzen."
 
+#: git-am.sh:95
+msgid ""
+"You seem to have moved HEAD since the last 'am' failure.\n"
+"Not rewinding to ORIG_HEAD"
+msgstr ""
+"Du scheinst seit dem letzten gescheiterten 'am' die Zweigspitze (HEAD)\n"
+"geändert zu haben.\n"
+"Keine Zurücksetzung zu ORIG_HEAD."
+
+#: git-am.sh:105
+#, sh-format
+msgid ""
+"When you have resolved this problem run \"$cmdline --resolved\".\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"Wenn du das Problem aufgelöst hast, führe \"$cmdline --resolved\" aus.\n"
+"Falls du diesen Patch auslassen möchtest, führe stattdessen "
+"\"$cmdline --skip\" aus.\n"
+"Um den ursprünglichen Zweig wiederherzustellen und die Anwendung der Patches\n"
+"abzubrechen, führe \"$cmdline --abort\" aus."
+
+#: git-am.sh:121
+msgid "Cannot fall back to three-way merge."
+msgstr "Kann nicht zu 3-Wege-Zusammenführung zurückfallen."
+
 #: git-am.sh:137
 msgid "Repository lacks necessary blobs to fall back on 3-way merge."
 msgstr ""
@@ -4985,12 +5011,33 @@
 msgstr ""
 "Unsaubere Bereitstellung: kann Patches nicht anwenden (unsauber: $files)"
 
+#: git-am.sh:671
+#, sh-format
+msgid ""
+"Patch is empty.  Was it split wrong?\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"Patch ist leer. Wurde er falsch aufgeteilt?\n"
+"Wenn du diesen Patch auslassen möchtest, führe stattdessen "
+"\"$cmdline --skip\" aus.\n"
+"Um den ursprünglichen Zweig wiederherzustellen und die Anwendung der Patches\n"
+"abzubrechen, führe \"$cmdline --abort\" aus."
+
+#: git-am.sh:708
+msgid "Patch does not have a valid e-mail address."
+msgstr "Patch enthält keine gültige eMail-Adresse."
+
 #: git-am.sh:755
 msgid "cannot be interactive without stdin connected to a terminal."
 msgstr ""
 "Kann nicht interaktiv sein, ohne dass die Standard-Eingabe mit einem "
 "Terminal verbunden ist."
 
+#: git-am.sh:759
+msgid "Commit Body is:"
+msgstr "Beschreibung der Eintragung ist:"
+
 #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
 #. in your translation. The program will only accept English
 #. input at this point.
@@ -5003,14 +5050,42 @@
 msgid "Applying: $FIRSTLINE"
 msgstr "Wende an: $FIRSTLINE"
 
+#: git-am.sh:823
+msgid ""
+"No changes - did you forget to use 'git add'?\n"
+"If there is nothing left to stage, chances are that something else\n"
+"already introduced the same changes; you might want to skip this patch."
+msgstr ""
+"Keine Änderungen - hast du vergessen 'git add' zu benutzen?\n"
+"Wenn keine Änderungen mehr zum Bereitstellen vorhanden sind, könnten\n"
+"diese bereits anderweitig eingefügt worden sein; du könntest diesen Patch\n"
+"auslassen."
+
+#: git-am.sh:831
+msgid ""
+"You still have unmerged paths in your index\n"
+"did you forget to use 'git add'?"
+msgstr ""
+"Du hast immer noch nicht zusammengeführte Pfade in der Bereitstellung.\n"
+"Hast du vergessen 'git add' zu benutzen?"
+
 #: git-am.sh:847
 msgid "No changes -- Patch already applied."
 msgstr "Keine Änderungen -- Patches bereits angewendet."
 
+#: git-am.sh:857
+#, sh-format
+msgid "Patch failed at $msgnum $FIRSTLINE"
+msgstr "Anwendung des Patches fehlgeschlagen bei $msgnum $FIRSTLINE"
+
 #: git-am.sh:873
 msgid "applying to an empty history"
 msgstr "wende zu leerer Historie an"
 
+#: git-bisect.sh:48
+msgid "You need to start by \"git bisect start\""
+msgstr "Du musst mit \"git bisect start\" beginnen."
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -5071,6 +5146,12 @@
 msgid "'git bisect bad' can take only one argument."
 msgstr "'git bisect bad' kann nur ein Argument entgegennehmen."
 
+#. have bad but not good.  we could bisect although
+#. this is less optimum.
+#: git-bisect.sh:273
+msgid "Warning: bisecting only with a bad commit."
+msgstr "Warnung: halbiere nur mit einer fehlerhaften Version"
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -5078,6 +5159,29 @@
 msgid "Are you sure [Y/n]? "
 msgstr "Bist du sicher [Y/n]? "
 
+#: git-bisect.sh:289
+msgid ""
+"You need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"Du musst mindestens eine korrekte und eine fehlerhafte Version angeben.\n"
+"(Du kannst dafür \"git bisect bad\" und \"git bisect good\" benutzen.)"
+
+#: git-bisect.sh:292
+msgid ""
+"You need to start by \"git bisect start\".\n"
+"You then need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"Du musst mit \"git bisect start\" beginnen.\n"
+"Danach musst du mindestens eine korrekte und eine fehlerhafte Version "
+"angeben.\n"
+"(Du kannst dafür \"git bisect bad\" und \"git bisect good\" benutzen.)"
+
+#: git-bisect.sh:347 git-bisect.sh:474
+msgid "We are not bisecting."
+msgstr "Wir sind nicht beim Halbieren."
+
 #: git-bisect.sh:354
 #, sh-format
 msgid "'$invalid' is not a valid commit"
@@ -5105,9 +5209,36 @@
 msgid "?? what are you talking about?"
 msgstr "?? Was redest du da?"
 
-#: git-bisect.sh:474
-msgid "We are not bisecting."
-msgstr "Wir sind nicht beim Halbieren."
+#: git-bisect.sh:420
+#, sh-format
+msgid "running $command"
+msgstr "führe $command aus"
+
+#: git-bisect.sh:427
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"exit code $res from '$command' is < 0 or >= 128"
+msgstr ""
+"Ausführung der Halbierung fehlgeschlagen:\n"
+"Rückkehrwert $res von '$command' ist < 0 oder >= 128"
+
+#: git-bisect.sh:453
+msgid "bisect run cannot continue any more"
+msgstr "Ausführung der Halbierung kann nicht mehr fortgesetzt werden"
+
+#: git-bisect.sh:459
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"'bisect_state $state' exited with error code $res"
+msgstr ""
+"Ausführung der Halbierung fehlgeschlagen:\n"
+"'bisect_state $state' wurde mit Fehlerwert $res beendet"
+
+#: git-bisect.sh:466
+msgid "bisect run success"
+msgstr "Halbierung erfolgreich ausgeführt"
 
 #: git-pull.sh:21
 msgid ""
@@ -5130,6 +5261,20 @@
 "Aktualisiere eine ungeborenen Zweig mit Änderungen, die zur Bereitstellung "
 "hinzugefügt wurden"
 
+#. The fetch involved updating the current branch.
+#. The working tree and the index file is still based on the
+#. $orig_head commit, but we are merging into $curr_head.
+#. First update the working tree to match $curr_head.
+#: git-pull.sh:228
+#, sh-format
+msgid ""
+"Warning: fetch updated the current branch head.\n"
+"Warning: fast-forwarding your working tree from\n"
+"Warning: commit $orig_head."
+msgstr ""
+"Warnung: Die Anforderung aktualisierte die Spitze des aktuellen Zweiges.\n"
+"Warnung: Spule deinen Arbeitszweig von Version $orig_head vor."
+
 #: git-pull.sh:253
 msgid "Cannot merge multiple branches into empty head"
 msgstr "Kann nicht mehrere Zweige in einen ungeborenen Zweig zusammenführen"
@@ -5166,6 +5311,26 @@
 msgid "Cannot record working tree state"
 msgstr "Kann Zustand des Arbeitsbaumes nicht aufzeichnen"
 
+#. TRANSLATORS: $option is an invalid option, like
+#. `--blah-blah'. The 7 spaces at the beginning of the
+#. second line correspond to "error: ". So you should line
+#. up the second line with however many characters the
+#. translation of "error: " takes in your language. E.g. in
+#. English this is:
+#.
+#. $ git stash save --blah-blah 2>&1 | head -n 2
+#. error: unknown option for 'stash save': --blah-blah
+#. To provide a message, use git stash save -- '--blah-blah'
+#: git-stash.sh:202
+#, sh-format
+msgid ""
+"error: unknown option for 'stash save': $option\n"
+"       To provide a message, use git stash save -- '$option'"
+msgstr ""
+"Fehler: unbekannte Option für 'stash save': $option\n"
+"        Um eine Beschreibung anzugeben, benutze \"git stash save -- "
+"'$option'\""
+
 #: git-stash.sh:223
 msgid "No local changes to save"
 msgstr "Keine lokalen Änderungen zum Speichern"
@@ -5227,6 +5392,10 @@
 msgid "Cannot unstage modified files"
 msgstr "Kann geänderte Dateien nicht aus der Bereitstellung herausnehmen"
 
+#: git-stash.sh:474
+msgid "Index was not unstashed."
+msgstr "Bereitstellung wurde nicht ausgelagert."
+
 #: git-stash.sh:491
 #, sh-format
 msgid "Dropped ${REV} ($s)"
@@ -5277,6 +5446,24 @@
 msgid "'$sm_path' already exists in the index"
 msgstr "'$sm_path' existiert bereits in der Bereitstellung"
 
+#: git-submodule.sh:270
+#, sh-format
+msgid ""
+"The following path is ignored by one of your .gitignore files:\n"
+"$sm_path\n"
+"Use -f if you really want to add it."
+msgstr ""
+"Der folgende Pfad wird durch eine deiner \".gitignore\" Dateien "
+"ignoriert:\n"
+"$sm_path\n"
+"Benutze -f wenn du diesen wirklich hinzufügen möchtest."
+
+#: git-submodule.sh:281
+#, sh-format
+msgid "Adding existing repo at '$sm_path' to the index"
+msgstr "Füge existierendes Projektarchiv in '$sm_path' der Bereitstellung "
+"hinzu."
+
 #: git-submodule.sh:283
 #, sh-format
 msgid "'$sm_path' already exists and is not a valid git repo"
@@ -5385,8 +5572,14 @@
 msgstr "Fehler bei Rekursion in Unterprojekt-Pfad '$sm_path'"
 
 #: git-submodule.sh:713
-msgid "--"
-msgstr "--"
+msgid "--cached cannot be used with --files"
+msgstr "--cached kann nicht mit --files benutzt werden"
+
+#. unexpected type
+#: git-submodule.sh:753
+#, sh-format
+msgid "unexpected mode $mod_dst"
+msgstr "unerwarteter Modus $mod_dst"
 
 #: git-submodule.sh:771
 #, sh-format
@@ -5412,11 +5605,22 @@
 msgid "submodule"
 msgstr "Unterprojekt"
 
+#: git-submodule.sh:840
+msgid "# Submodules changed but not updated:"
+msgstr "# Unterprojekte geändert, aber nicht aktualisiert:"
+
+#: git-submodule.sh:842
+msgid "# Submodule changes to be committed:"
+msgstr "# Änderungen in Unterprojekt zum Eintragen:"
+
 #: git-submodule.sh:974
 #, sh-format
 msgid "Synchronizing submodule url for '$name'"
 msgstr "Synchronisiere Unterprojekt-URL für '$name'"
 
+#~ msgid "--"
+#~ msgstr "--"
+
 #~ msgid "Could not extract email from committer identity."
 #~ msgstr "Konnte E-Mail-Adresse des Einreichers nicht extrahieren."
 
diff --git a/po/git.pot b/po/git.pot
index 81464cc..b666506 100644
--- a/po/git.pot
+++ b/po/git.pot
@@ -8,7 +8,7 @@
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2012-06-02 07:03+0800\n"
+"POT-Creation-Date: 2012-06-08 10:20+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -4590,6 +4590,24 @@
 msgid "You need to set your committer info first"
 msgstr ""
 
+#: git-am.sh:95
+msgid ""
+"You seem to have moved HEAD since the last 'am' failure.\n"
+"Not rewinding to ORIG_HEAD"
+msgstr ""
+
+#: git-am.sh:105
+#, sh-format
+msgid ""
+"When you have resolved this problem run \"$cmdline --resolved\".\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+
+#: git-am.sh:121
+msgid "Cannot fall back to three-way merge."
+msgstr ""
+
 #: git-am.sh:137
 msgid "Repository lacks necessary blobs to fall back on 3-way merge."
 msgstr ""
@@ -4639,10 +4657,26 @@
 msgid "Dirty index: cannot apply patches (dirty: $files)"
 msgstr ""
 
+#: git-am.sh:671
+#, sh-format
+msgid ""
+"Patch is empty.  Was it split wrong?\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+
+#: git-am.sh:708
+msgid "Patch does not have a valid e-mail address."
+msgstr ""
+
 #: git-am.sh:755
 msgid "cannot be interactive without stdin connected to a terminal."
 msgstr ""
 
+#: git-am.sh:759
+msgid "Commit Body is:"
+msgstr ""
+
 #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
 #. in your translation. The program will only accept English
 #. input at this point.
@@ -4655,14 +4689,36 @@
 msgid "Applying: $FIRSTLINE"
 msgstr ""
 
+#: git-am.sh:823
+msgid ""
+"No changes - did you forget to use 'git add'?\n"
+"If there is nothing left to stage, chances are that something else\n"
+"already introduced the same changes; you might want to skip this patch."
+msgstr ""
+
+#: git-am.sh:831
+msgid ""
+"You still have unmerged paths in your index\n"
+"did you forget to use 'git add'?"
+msgstr ""
+
 #: git-am.sh:847
 msgid "No changes -- Patch already applied."
 msgstr ""
 
+#: git-am.sh:857
+#, sh-format
+msgid "Patch failed at $msgnum $FIRSTLINE"
+msgstr ""
+
 #: git-am.sh:873
 msgid "applying to an empty history"
 msgstr ""
 
+#: git-bisect.sh:48
+msgid "You need to start by \"git bisect start\""
+msgstr ""
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -4721,6 +4777,12 @@
 msgid "'git bisect bad' can take only one argument."
 msgstr ""
 
+#. have bad but not good.  we could bisect although
+#. this is less optimum.
+#: git-bisect.sh:273
+msgid "Warning: bisecting only with a bad commit."
+msgstr ""
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -4728,6 +4790,23 @@
 msgid "Are you sure [Y/n]? "
 msgstr ""
 
+#: git-bisect.sh:289
+msgid ""
+"You need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+
+#: git-bisect.sh:292
+msgid ""
+"You need to start by \"git bisect start\".\n"
+"You then need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+
+#: git-bisect.sh:347 git-bisect.sh:474
+msgid "We are not bisecting."
+msgstr ""
+
 #: git-bisect.sh:354
 #, sh-format
 msgid "'$invalid' is not a valid commit"
@@ -4753,8 +4832,31 @@
 msgid "?? what are you talking about?"
 msgstr ""
 
-#: git-bisect.sh:474
-msgid "We are not bisecting."
+#: git-bisect.sh:420
+#, sh-format
+msgid "running $command"
+msgstr ""
+
+#: git-bisect.sh:427
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"exit code $res from '$command' is < 0 or >= 128"
+msgstr ""
+
+#: git-bisect.sh:453
+msgid "bisect run cannot continue any more"
+msgstr ""
+
+#: git-bisect.sh:459
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"'bisect_state $state' exited with error code $res"
+msgstr ""
+
+#: git-bisect.sh:466
+msgid "bisect run success"
 msgstr ""
 
 #: git-pull.sh:21
@@ -4772,6 +4874,18 @@
 msgid "updating an unborn branch with changes added to the index"
 msgstr ""
 
+#. The fetch involved updating the current branch.
+#. The working tree and the index file is still based on the
+#. $orig_head commit, but we are merging into $curr_head.
+#. First update the working tree to match $curr_head.
+#: git-pull.sh:228
+#, sh-format
+msgid ""
+"Warning: fetch updated the current branch head.\n"
+"Warning: fast-forwarding your working tree from\n"
+"Warning: commit $orig_head."
+msgstr ""
+
 #: git-pull.sh:253
 msgid "Cannot merge multiple branches into empty head"
 msgstr ""
@@ -4808,6 +4922,23 @@
 msgid "Cannot record working tree state"
 msgstr ""
 
+#. TRANSLATORS: $option is an invalid option, like
+#. `--blah-blah'. The 7 spaces at the beginning of the
+#. second line correspond to "error: ". So you should line
+#. up the second line with however many characters the
+#. translation of "error: " takes in your language. E.g. in
+#. English this is:
+#.
+#. $ git stash save --blah-blah 2>&1 | head -n 2
+#. error: unknown option for 'stash save': --blah-blah
+#. To provide a message, use git stash save -- '--blah-blah'
+#: git-stash.sh:202
+#, sh-format
+msgid ""
+"error: unknown option for 'stash save': $option\n"
+"       To provide a message, use git stash save -- '$option'"
+msgstr ""
+
 #: git-stash.sh:223
 msgid "No local changes to save"
 msgstr ""
@@ -4868,6 +4999,10 @@
 msgid "Cannot unstage modified files"
 msgstr ""
 
+#: git-stash.sh:474
+msgid "Index was not unstashed."
+msgstr ""
+
 #: git-stash.sh:491
 #, sh-format
 msgid "Dropped ${REV} ($s)"
@@ -4916,6 +5051,19 @@
 msgid "'$sm_path' already exists in the index"
 msgstr ""
 
+#: git-submodule.sh:270
+#, sh-format
+msgid ""
+"The following path is ignored by one of your .gitignore files:\n"
+"$sm_path\n"
+"Use -f if you really want to add it."
+msgstr ""
+
+#: git-submodule.sh:281
+#, sh-format
+msgid "Adding existing repo at '$sm_path' to the index"
+msgstr ""
+
 #: git-submodule.sh:283
 #, sh-format
 msgid "'$sm_path' already exists and is not a valid git repo"
@@ -5019,7 +5167,13 @@
 msgstr ""
 
 #: git-submodule.sh:713
-msgid "--"
+msgid "--cached cannot be used with --files"
+msgstr ""
+
+#. unexpected type
+#: git-submodule.sh:753
+#, sh-format
+msgid "unexpected mode $mod_dst"
 msgstr ""
 
 #: git-submodule.sh:771
@@ -5045,6 +5199,14 @@
 msgid "submodule"
 msgstr ""
 
+#: git-submodule.sh:840
+msgid "# Submodules changed but not updated:"
+msgstr ""
+
+#: git-submodule.sh:842
+msgid "# Submodule changes to be committed:"
+msgstr ""
+
 #: git-submodule.sh:974
 #, sh-format
 msgid "Synchronizing submodule url for '$name'"
diff --git a/po/vi.po b/po/vi.po
index 6456e75..f0529f4 100644
--- a/po/vi.po
+++ b/po/vi.po
@@ -5,10 +5,10 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: git-1.7.11-rc0-100-g5498c\n"
+"Project-Id-Version: git-1.7.11.rc2.2.gb694fbb\n"
 "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2012-06-02 07:03+0800\n"
-"PO-Revision-Date: 2012-06-03 07:13+0700\n"
+"POT-Creation-Date: 2012-06-08 10:20+0800\n"
+"PO-Revision-Date: 2012-06-09 14:08+0700\n"
 "Last-Translator: Trần Ngọc Quân <vnwildman@gmail.com>\n"
 "Language-Team: Vietnamese <translation-team-vi@lists.sourceforge.net>\n"
 "MIME-Version: 1.0\n"
@@ -4887,6 +4887,29 @@
 msgid "You need to set your committer info first"
 msgstr "Bạn cần đặt thông tin về người chuyển giao mã nguồn trước đã"
 
+#: git-am.sh:95
+msgid ""
+"You seem to have moved HEAD since the last 'am' failure.\n"
+"Not rewinding to ORIG_HEAD"
+msgstr ""
+"Bạn có lẽ đã có HEAD đã bị di chuyển đi kể từ lần 'am' thất bại cuối cùng.\n"
+"Không thể chuyển tới ORIG_HEAD"
+
+#: git-am.sh:105
+#, sh-format
+msgid ""
+"When you have resolved this problem run \"$cmdline --resolved\".\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"Khi bạn cần giải quyết vấn đề này hãy chạy lệnh \"$cmdline --resolved\".\n"
+"Nếu bạn có ý định bỏ qua miếng vá, thay vào đó bạn chạy \"$cmdline --skip\".\n"
+"Để phục hồi lại thành nhánh nguyên bản và dừng việc vá lại thì chạy \"$cmdline --abort\"."
+
+#: git-am.sh:121
+msgid "Cannot fall back to three-way merge."
+msgstr "Đang trở lại để hòa trộn kiểu 'three-way'."
+
 #: git-am.sh:137
 msgid "Repository lacks necessary blobs to fall back on 3-way merge."
 msgstr "Kho thiếu đối tượng blob cần thiết để trở về trên '3-way merge'."
@@ -4938,10 +4961,29 @@
 msgid "Dirty index: cannot apply patches (dirty: $files)"
 msgstr "Bảng mục lục sai: không thể áp dụng các miếng vá (sai: $files)"
 
+#: git-am.sh:671
+#, sh-format
+msgid ""
+"Patch is empty.  Was it split wrong?\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"Miếng vá trống rỗng.  Nó đã bị chia cắt sai phải không?\n"
+"Nếu bạn thích bỏ qua miếng vá này, hãy chạy lệnh sau để thay thế \"$cmdline --skip\".\n"
+"Để phục hồi lại nhánh nguyên bản và dừng vá lại hãy chạy lệnh \"$cmdline --abort\"."
+
+#: git-am.sh:708
+msgid "Patch does not have a valid e-mail address."
+msgstr "Miếng vá không có địa chỉ e-mail hợp lệ."
+
 #: git-am.sh:755
 msgid "cannot be interactive without stdin connected to a terminal."
 msgstr "không thể được tương tác mà không có stdin kết nối với một thiết bị cuối"
 
+#: git-am.sh:759
+msgid "Commit Body is:"
+msgstr "Thân của lần chuyển giao (commit) là:"
+
 #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
 #. in your translation. The program will only accept English
 #. input at this point.
@@ -4954,14 +4996,41 @@
 msgid "Applying: $FIRSTLINE"
 msgstr "Đang áp dụng (miếng vá): $FIRSTLINE"
 
+#: git-am.sh:823
+msgid ""
+"No changes - did you forget to use 'git add'?\n"
+"If there is nothing left to stage, chances are that something else\n"
+"already introduced the same changes; you might want to skip this patch."
+msgstr ""
+"Không có thay đổi nào - bạn đã quên sử dụng lệnh 'git add' à?\n"
+"Nếu ở đây không có gì còn lại stage, tình cờ là có một số thứ khác\n"
+"đã sẵn được đưa vào với cùng nội dung thay đổi; bạn có lẽ muốn bỏ qua miếng vá này."
+
+#: git-am.sh:831
+msgid ""
+"You still have unmerged paths in your index\n"
+"did you forget to use 'git add'?"
+msgstr ""
+"Bạn vẫn có những đường dẫn chưa được hòa trộn trong bảng mục lục của mình\n"
+"bạn đã quên sử dụng lệnh 'git add' à?"
+
 #: git-am.sh:847
 msgid "No changes -- Patch already applied."
 msgstr "Không thay đổi gì cả -- Miếng vá đã được áp dụng rồi."
 
+#: git-am.sh:857
+#, sh-format
+msgid "Patch failed at $msgnum $FIRSTLINE"
+msgstr "Vá gặp lỗi tại $msgnum $FIRSTLINE"
+
 #: git-am.sh:873
 msgid "applying to an empty history"
 msgstr "áp dụng vào một lịch sử trống rỗng"
 
+#: git-bisect.sh:48
+msgid "You need to start by \"git bisect start\""
+msgstr "Bạn cần khởi đầu bằng \"git bisect start\""
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -5019,6 +5088,12 @@
 msgid "'git bisect bad' can take only one argument."
 msgstr "'git bisect bad' có thể lấy chỉ một đối số."
 
+#. have bad but not good.  we could bisect although
+#. this is less optimum.
+#: git-bisect.sh:273
+msgid "Warning: bisecting only with a bad commit."
+msgstr "Cảnh báo: chỉ thực hiện việc bisect với một lần chuyển giao (commit) sai."
+
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
 #. at this point.
@@ -5026,6 +5101,29 @@
 msgid "Are you sure [Y/n]? "
 msgstr "Bạn có chắc chắn chưa [Y/n]?"
 
+#: git-bisect.sh:289
+msgid ""
+"You need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"Bạn phải chỉ cho tôi ít nhất một điểm xét duyệt tốt và một điểm sai.\n"
+"(Bạn có thể sử dụng \"git bisect bad\" và \"git bisect good\" cho cái đó.)"
+
+#: git-bisect.sh:292
+msgid ""
+"You need to start by \"git bisect start\".\n"
+"You then need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"Bạn cần bắt đầu bằng lệnh \"git bisect start\".\n"
+"Bạn sau đó cần phải chỉ cho tôi ít nhất một điểm xét duyệt đúng và một điểm sai.\n"
+"(Bạn có thể sử dụng \"git bisect bad\" và \"git bisect good\" cho chúng.)"
+
+#: git-bisect.sh:347
+#: git-bisect.sh:474
+msgid "We are not bisecting."
+msgstr "Chúng tôi không bisect."
+
 #: git-bisect.sh:354
 #, sh-format
 msgid "'$invalid' is not a valid commit"
@@ -5053,9 +5151,36 @@
 msgid "?? what are you talking about?"
 msgstr "?? bạn đang nói gì thế?"
 
-#: git-bisect.sh:474
-msgid "We are not bisecting."
-msgstr "Chúng tôi không bisect."
+#: git-bisect.sh:420
+#, sh-format
+msgid "running $command"
+msgstr "đang chạy lệnh $command"
+
+#: git-bisect.sh:427
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"exit code $res from '$command' is < 0 or >= 128"
+msgstr ""
+"chạy bisect gặp lỗi:\n"
+"mã trả về $res từ lệnh '$command' là < 0 hoặc >= 128"
+
+#: git-bisect.sh:453
+msgid "bisect run cannot continue any more"
+msgstr "bisect không thể tiếp tục thêm được nữa"
+
+#: git-bisect.sh:459
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"'bisect_state $state' exited with error code $res"
+msgstr ""
+"chạy bisect gặp lỗi:\n"
+"'bisect_state $state' đã thoát ra với mã lỗi $res"
+
+#: git-bisect.sh:466
+msgid "bisect run success"
+msgstr "bisect chạy thành công"
 
 #: git-pull.sh:21
 msgid ""
@@ -5075,6 +5200,21 @@
 msgid "updating an unborn branch with changes added to the index"
 msgstr "đang cập nhật một nhánh chưa được sinh ra với các thay đổi được thêm vào bảng mục lục"
 
+#. The fetch involved updating the current branch.
+#. The working tree and the index file is still based on the
+#. $orig_head commit, but we are merging into $curr_head.
+#. First update the working tree to match $curr_head.
+#: git-pull.sh:228
+#, sh-format
+msgid ""
+"Warning: fetch updated the current branch head.\n"
+"Warning: fast-forwarding your working tree from\n"
+"Warning: commit $orig_head."
+msgstr ""
+"Cảnh báo: fetch đã cập nhật head nhánh hiện tại.\n"
+"Cảnh báo: đang fast-forward cây làm việc của bạn từ\n"
+"Cảnh báo: commit $orig_head."
+
 #: git-pull.sh:253
 msgid "Cannot merge multiple branches into empty head"
 msgstr "Không thể hòa trộn nhiều nhánh và trong một head trống rỗng"
@@ -5112,6 +5252,25 @@
 msgid "Cannot record working tree state"
 msgstr "Không thể ghi lại trạng thái cây làm việc hiện hành"
 
+#. TRANSLATORS: $option is an invalid option, like
+#. `--blah-blah'. The 7 spaces at the beginning of the
+#. second line correspond to "error: ". So you should line
+#. up the second line with however many characters the
+#. translation of "error: " takes in your language. E.g. in
+#. English this is:
+#.
+#. $ git stash save --blah-blah 2>&1 | head -n 2
+#. error: unknown option for 'stash save': --blah-blah
+#. To provide a message, use git stash save -- '--blah-blah'
+#: git-stash.sh:202
+#, sh-format
+msgid ""
+"error: unknown option for 'stash save': $option\n"
+"       To provide a message, use git stash save -- '$option'"
+msgstr ""
+"lỗi: không hiểu tùy chọn cho 'stash save': $option\n"
+"       Để cung cấp một thông điệp, sử dụng git stash save -- '$option'"
+
 #: git-stash.sh:223
 msgid "No local changes to save"
 msgstr "Không có thay đổi nội bộ nào được ghi lại"
@@ -5172,6 +5331,10 @@
 msgid "Cannot unstage modified files"
 msgstr "Không thể bỏ trạng thía của các tập tin đã được sửa chữa"
 
+#: git-stash.sh:474
+msgid "Index was not unstashed."
+msgstr "Bảng mục lục đã không được bỏ stash."
+
 #: git-stash.sh:491
 #, sh-format
 msgid "Dropped ${REV} ($s)"
@@ -5220,6 +5383,22 @@
 msgid "'$sm_path' already exists in the index"
 msgstr "'$sm_path' thực sự đã tồn tại ở bảng mục lục rồi"
 
+#: git-submodule.sh:270
+#, sh-format
+msgid ""
+"The following path is ignored by one of your .gitignore files:\n"
+"$sm_path\n"
+"Use -f if you really want to add it."
+msgstr ""
+"Các đường dẫn theo sau đây sẽ bị lờ đi bởi một trong các tập tin .gitignore của bạn:\n"
+"$sm_path\n"
+"Sử dụng -f nếu bạn thực sự muốn thêm nó vào."
+
+#: git-submodule.sh:281
+#, sh-format
+msgid "Adding existing repo at '$sm_path' to the index"
+msgstr "Đang thêm repo có sẵn tại '$sm_path' vào bảng mục lục"
+
 #: git-submodule.sh:283
 #, sh-format
 msgid "'$sm_path' already exists and is not a valid git repo"
@@ -5326,8 +5505,14 @@
 msgstr "Gặp lỗi khi đệ quy vào trong đường dẫn mô-đun-con '$sm_path'"
 
 #: git-submodule.sh:713
-msgid "--"
-msgstr "--"
+msgid "--cached cannot be used with --files"
+msgstr "--cached không thể được sử dụng cùng với --files"
+
+#. unexpected type
+#: git-submodule.sh:753
+#, sh-format
+msgid "unexpected mode $mod_dst"
+msgstr "chế độ không như mong chờ $mod_dst"
 
 #: git-submodule.sh:771
 #, sh-format
@@ -5352,11 +5537,22 @@
 msgid "submodule"
 msgstr "mô-đun con"
 
+#: git-submodule.sh:840
+msgid "# Submodules changed but not updated:"
+msgstr "# Những mô-đun-con đã bị thay đổi nhưng chưa được cập nhật:"
+
+#: git-submodule.sh:842
+msgid "# Submodule changes to be committed:"
+msgstr "# Những thay đổi mô-đun-con được chuyển giao (commit):"
+
 #: git-submodule.sh:974
 #, sh-format
 msgid "Synchronizing submodule url for '$name'"
 msgstr "Đang đồng bộ hóa url mô-đun-con cho '$name'"
 
+#~ msgid "--"
+#~ msgstr "--"
+
 #~ msgid "Could not extract email from committer identity."
 #~ msgstr ""
 #~ "Không thể rút trích địa chỉ thư điện tử từ định danh người chuyển giao"
diff --git a/po/zh_CN.po b/po/zh_CN.po
index 1b7a51b..b46b53e 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -12,8 +12,8 @@
 msgstr ""
 "Project-Id-Version: Git\n"
 "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2012-06-02 07:03+0800\n"
-"PO-Revision-Date: 2012-06-02 17:05+0800\n"
+"POT-Creation-Date: 2012-06-08 10:20+0800\n"
+"PO-Revision-Date: 2012-06-08 12:24+0800\n"
 "Last-Translator: Jiang Xin <worldhello.net@gmail.com>\n"
 "Language-Team: GitHub <https://github.com/gotgit/git/>\n"
 "Language: zh_CN\n"
@@ -4806,6 +4806,28 @@
 msgid "You need to set your committer info first"
 msgstr "您需要先设置你的提交者信息"
 
+#: git-am.sh:95
+msgid ""
+"You seem to have moved HEAD since the last 'am' failure.\n"
+"Not rewinding to ORIG_HEAD"
+msgstr ""
+"您好像在上一次 'am' 失败后移动了 HEAD。未回退至 ORIG_HEAD"
+
+#: git-am.sh:105
+#, sh-format
+msgid ""
+"When you have resolved this problem run \"$cmdline --resolved\".\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"当您解决了此问题后，执行 \"$cmdline --resolved\"。\n"
+"如果您想跳过此补丁，则执行 \"$cmdline --skip\"。\n"
+"要恢复原分支并停止打补丁，执行 \"$cmdline --abort\"。"
+
+#: git-am.sh:121
+msgid "Cannot fall back to three-way merge."
+msgstr "无法求助于三路合并。"
+
 #: git-am.sh:137
 msgid "Repository lacks necessary blobs to fall back on 3-way merge."
 msgstr "版本库缺乏必要的 blob 数据以进行三路合并。"
@@ -4820,7 +4842,7 @@
 
 #: git-am.sh:163
 msgid "Falling back to patching base and 3-way merge..."
-msgstr "回退到补丁基础版本并使用三路合并..."
+msgstr "转而在基础版本上打补丁及进行三路合并..."
 
 #: git-am.sh:275
 msgid "Only one StGIT patch series can be applied at once"
@@ -4857,10 +4879,29 @@
 msgid "Dirty index: cannot apply patches (dirty: $files)"
 msgstr "脏的索引：不能应用补丁（脏文件：$files）"
 
+#: git-am.sh:671
+#, sh-format
+msgid ""
+"Patch is empty.  Was it split wrong?\n"
+"If you would prefer to skip this patch, instead run \"$cmdline --skip\".\n"
+"To restore the original branch and stop patching run \"$cmdline --abort\"."
+msgstr ""
+"补丁为空。是不是切分错误？\n"
+"如果您想要跳过这个补丁，执行 \"$cmdline --skip\"。\n"
+"要恢复原分支并停止打补丁，执行 \"$cmdline --abort\"。"
+
+#: git-am.sh:708
+msgid "Patch does not have a valid e-mail address."
+msgstr "补丁中没有一个有效的邮件地址。"
+
 #: git-am.sh:755
 msgid "cannot be interactive without stdin connected to a terminal."
 msgstr "标准输入没有和终端关联，不能进行交互式操作。"
 
+#: git-am.sh:759
+msgid "Commit Body is:"
+msgstr "提交内容为："
+
 #  译者：注意保持句尾空格
 #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
 #. in your translation. The program will only accept English
@@ -4874,14 +4915,40 @@
 msgid "Applying: $FIRSTLINE"
 msgstr "正应用：$FIRSTLINE"
 
+#: git-am.sh:823
+msgid ""
+"No changes - did you forget to use 'git add'?\n"
+"If there is nothing left to stage, chances are that something else\n"
+"already introduced the same changes; you might want to skip this patch."
+msgstr ""
+"没有变更 —— 您是不是忘了执行 'git add'？\n"
+"如果没有什么要添加到暂存区的，则很可能是其它提交已经引入了相同的变更。\n"
+"您也许想要跳过这个补丁。"
+
+#: git-am.sh:831
+msgid ""
+"You still have unmerged paths in your index\n"
+"did you forget to use 'git add'?"
+msgstr ""
+"您的索引中仍有未合并的路径。您是否忘了执行 'git add'？"
+
 #: git-am.sh:847
 msgid "No changes -- Patch already applied."
 msgstr "没有变更 -- 补丁已经应用过。"
 
+#: git-am.sh:857
+#, sh-format
+msgid "Patch failed at $msgnum $FIRSTLINE"
+msgstr "补丁失败于 $msgnum $FIRSTLINE"
+
 #: git-am.sh:873
 msgid "applying to an empty history"
 msgstr "正应用到一个空历史上"
 
+#: git-bisect.sh:48
+msgid "You need to start by \"git bisect start\""
+msgstr "您需要执行 \"git bisect start\" 来开始"
+
 #  译者：注意保持句尾空格
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
@@ -4941,6 +5008,12 @@
 msgid "'git bisect bad' can take only one argument."
 msgstr "'git bisect bad' 只能带一个参数。"
 
+#. have bad but not good.  we could bisect although
+#. this is less optimum.
+#: git-bisect.sh:273
+msgid "Warning: bisecting only with a bad commit."
+msgstr "警告：在仅有一个坏提交下进行二分查找。"
+
 #  译者：注意保持句尾空格
 #. TRANSLATORS: Make sure to include [Y] and [n] in your
 #. translation. The program will only accept English input
@@ -4949,6 +5022,28 @@
 msgid "Are you sure [Y/n]? "
 msgstr "您确认么[Y/n]？ "
 
+#: git-bisect.sh:289
+msgid ""
+"You need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"您需要给我至少一个好版本和一个坏版本。\n"
+"（您可以用 \"git bisect bad\" 和 \"git bisect good\" 命令来标识。）"
+
+#: git-bisect.sh:292
+msgid ""
+"You need to start by \"git bisect start\".\n"
+"You then need to give me at least one good and one bad revisions.\n"
+"(You can use \"git bisect bad\" and \"git bisect good\" for that.)"
+msgstr ""
+"您需要执行 \"git bisect start\" 来开始。\n"
+"然后需要提供我至少一个好版本和一个坏版本。\n"
+"（您可以用 \"git bisect bad\" 和 \"git bisect good\" 命令来标识。）"
+
+#: git-bisect.sh:347 git-bisect.sh:474
+msgid "We are not bisecting."
+msgstr "我们没有在二分查找。"
+
 #: git-bisect.sh:354
 #, sh-format
 msgid "'$invalid' is not a valid commit"
@@ -4976,9 +5071,36 @@
 msgid "?? what are you talking about?"
 msgstr "?? 您在说什么?"
 
-#: git-bisect.sh:474
-msgid "We are not bisecting."
-msgstr "我们没有在二分查找。"
+#: git-bisect.sh:420
+#, sh-format
+msgid "running $command"
+msgstr "运行 $command"
+
+#: git-bisect.sh:427
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"exit code $res from '$command' is < 0 or >= 128"
+msgstr ""
+"二分查找运行失败：\n"
+"命令 '$command' 的退出码 $res 或者小于 0 或者大于等于 128"
+
+#: git-bisect.sh:453
+msgid "bisect run cannot continue any more"
+msgstr "二分查找不能继续运行"
+
+#: git-bisect.sh:459
+#, sh-format
+msgid ""
+"bisect run failed:\n"
+"'bisect_state $state' exited with error code $res"
+msgstr ""
+"二分查找运行失败：\n"
+"'bisect_state $state' 退出码为 $res"
+
+#: git-bisect.sh:466
+msgid "bisect run success"
+msgstr "二分查找运行成功"
 
 #: git-pull.sh:21
 msgid ""
@@ -4998,6 +5120,20 @@
 msgid "updating an unborn branch with changes added to the index"
 msgstr "更新尚未诞生的分支，变更添加至索引"
 
+#. The fetch involved updating the current branch.
+#. The working tree and the index file is still based on the
+#. $orig_head commit, but we are merging into $curr_head.
+#. First update the working tree to match $curr_head.
+#: git-pull.sh:228
+#, sh-format
+msgid ""
+"Warning: fetch updated the current branch head.\n"
+"Warning: fast-forwarding your working tree from\n"
+"Warning: commit $orig_head."
+msgstr ""
+"警告：fetch 更新了当前的分支。您的工作区\n"
+"警告：从原提交 $orig_head 快进。"
+
 #: git-pull.sh:253
 msgid "Cannot merge multiple branches into empty head"
 msgstr "无法将多个分支合并到空分支"
@@ -5034,6 +5170,25 @@
 msgid "Cannot record working tree state"
 msgstr "不能记录工作区状态"
 
+#. TRANSLATORS: $option is an invalid option, like
+#. `--blah-blah'. The 7 spaces at the beginning of the
+#. second line correspond to "error: ". So you should line
+#. up the second line with however many characters the
+#. translation of "error: " takes in your language. E.g. in
+#. English this is:
+#.
+#. $ git stash save --blah-blah 2>&1 | head -n 2
+#. error: unknown option for 'stash save': --blah-blah
+#. To provide a message, use git stash save -- '--blah-blah'
+#: git-stash.sh:202
+#, sh-format
+msgid ""
+"error: unknown option for 'stash save': $option\n"
+"       To provide a message, use git stash save -- '$option'"
+msgstr ""
+"错误：'stash save' 的未知选项：$option\n"
+"      要提供一个描述信息，使用 git stash save -- '$option'"
+
 #: git-stash.sh:223
 msgid "No local changes to save"
 msgstr "没有要保存的本地修改"
@@ -5094,6 +5249,10 @@
 msgid "Cannot unstage modified files"
 msgstr "无法还原修改的文件"
 
+#: git-stash.sh:474
+msgid "Index was not unstashed."
+msgstr "索引的进度没有被恢复。"
+
 #: git-stash.sh:491
 #, sh-format
 msgid "Dropped ${REV} ($s)"
@@ -5142,6 +5301,22 @@
 msgid "'$sm_path' already exists in the index"
 msgstr "'$sm_path' 已经存在于索引中"
 
+#: git-submodule.sh:270
+#, sh-format
+msgid ""
+"The following path is ignored by one of your .gitignore files:\n"
+"$sm_path\n"
+"Use -f if you really want to add it."
+msgstr ""
+"以下路径被您的一个 .gitignore 文件所忽略：\n"
+"$sm_path\n"
+"如果您确实想添加它，使用 -f 参数。"
+
+#: git-submodule.sh:281
+#, sh-format
+msgid "Adding existing repo at '$sm_path' to the index"
+msgstr "添加位于 '$sm_path' 的现存版本库到索引"
+
 #: git-submodule.sh:283
 #, sh-format
 msgid "'$sm_path' already exists and is not a valid git repo"
@@ -5247,8 +5422,14 @@
 msgstr "无法递归进子模组路径 '$sm_path'"
 
 #: git-submodule.sh:713
-msgid "--"
-msgstr "--"
+msgid "--cached cannot be used with --files"
+msgstr "--cached 不能和 --files 共用"
+
+#. unexpected type
+#: git-submodule.sh:753
+#, sh-format
+msgid "unexpected mode $mod_dst"
+msgstr "意外的模式 $mod_dst"
 
 #  译者：注意保持前导空格
 #: git-submodule.sh:771
@@ -5276,19 +5457,15 @@
 msgid "submodule"
 msgstr "子模组"
 
+#: git-submodule.sh:840
+msgid "# Submodules changed but not updated:"
+msgstr "# 子模组已修改但尚未更新："
+
+#: git-submodule.sh:842
+msgid "# Submodule changes to be committed:"
+msgstr "要提交的子模组变更："
+
 #: git-submodule.sh:974
 #, sh-format
 msgid "Synchronizing submodule url for '$name'"
 msgstr "为 '$name' 同步子模组 url"
-
-#~ msgid "Could not extract email from committer identity."
-#~ msgstr "不能从提交者身份中提取邮件地址。"
-
-#~ msgid "cherry-pick"
-#~ msgstr "拣选"
-
-#~ msgid "Please enter the commit message for your changes."
-#~ msgstr "请为您的修改输入提交说明。"
-
-#~ msgid "Too many options specified"
-#~ msgstr "指定了太多的选项"