blob: 823053173c92e4097dad54945db16f42b4b5d994 [file] [log] [blame]
GIT web Interface (gitweb) Installation
=======================================
First you have to generate gitweb.cgi from gitweb.perl using
"make gitweb", then "make install-gitweb" appropriate files
(gitweb.cgi, gitweb.js, gitweb.css, git-logo.png and git-favicon.png)
to their destination. For example if git was (or is) installed with
/usr prefix and gitwebdir is /var/www/cgi-bin, you can do
$ make prefix=/usr gitweb ;# as yourself
# make gitwebdir=/var/www/cgi-bin install-gitweb ;# as root
Alternatively you can use autoconf generated ./configure script to
set up path to git binaries (via config.mak.autogen), so you can write
instead
$ make configure ;# as yourself
$ ./configure --prefix=/usr ;# as yourself
$ make gitweb ;# as yourself
# make gitwebdir=/var/www/cgi-bin \
install-gitweb ;# as root
The above example assumes that your web server is configured to run
[executable] files in /var/www/cgi-bin/ as server scripts (as CGI
scripts).
Build time configuration
------------------------
See also "How to configure gitweb for your local system" in README
file for gitweb (in gitweb/README).
- There are many configuration variables which affect building of
gitweb.cgi; see "default configuration for gitweb" section in main
(top dir) Makefile, and instructions for building gitweb target.
One of the most important is where to find the git wrapper binary. Gitweb
tries to find the git wrapper at $(bindir)/git, so you have to set $bindir
when building gitweb.cgi, or $prefix from which $bindir is derived. If
you build and install gitweb together with the rest of the git suite,
there should be no problems. Otherwise, if git was for example
installed from a binary package, you have to set $prefix (or $bindir)
accordingly.
- Another important issue is where are git repositories you want to make
available to gitweb. By default gitweb searches for repositories under
/pub/git; if you want to have projects somewhere else, like /home/git,
use GITWEB_PROJECTROOT build configuration variable.
By default all git repositories under projectroot are visible and
available to gitweb. The list of projects is generated by default by
scanning the projectroot directory for git repositories. This can be
changed (configured) as described in "Gitweb repositories" section
below.
Note that gitweb deals directly with the object database, and does not
need a working directory; the name of the project is the name of its
repository object database, usually projectname.git for bare
repositories. If you want to provide gitweb access to non-bare (live)
repositories, you can make projectname.git a symbolic link under
projectroot linking to projectname/.git (but it is just
a suggestion).
- You can control where gitweb tries to find its main CSS style file,
its JavaScript file, its favicon and logo with the GITWEB_CSS, GITWEB_JS
GITWEB_FAVICON and GITWEB_LOGO build configuration variables. By default
gitweb tries to find them in the same directory as gitweb.cgi script.
- You can optionally generate minified versions of gitweb.js and gitweb.css
by defining the JSMIN and CSSMIN build configuration variables. By default
the non-minified versions will be used. NOTE: if you enable this option,
substitute gitweb.min.js and gitweb.min.css for all uses of gitweb.js and
gitweb.css in the help files.
Build example
~~~~~~~~~~~~~
- To install gitweb to /var/www/cgi-bin/gitweb/, when git wrapper
is installed at /usr/local/bin/git, the repositories (projects)
we want to display are under /home/local/scm, and you do not use
minifiers, you can do
make GITWEB_PROJECTROOT="/home/local/scm" \
GITWEB_JS="gitweb/static/gitweb.js" \
GITWEB_CSS="gitweb/static/gitweb.css" \
GITWEB_LOGO="gitweb/static/git-logo.png" \
GITWEB_FAVICON="gitweb/static/git-favicon.png" \
bindir=/usr/local/bin \
gitweb
make gitwebdir=/var/www/cgi-bin/gitweb install-gitweb
Gitweb config file
------------------
See also "Runtime gitweb configuration" section in README file
for gitweb (in gitweb/README).
- You can configure gitweb further using the gitweb configuration file;
by default this is a file named gitweb_config.perl in the same place as
gitweb.cgi script. You can control the default place for the config file
using the GITWEB_CONFIG build configuration variable, and you can set it
using the GITWEB_CONFIG environment variable. If this file does not
exist, gitweb looks for a system-wide configuration file, normally
/etc/gitweb.conf. You can change the default using the
GITWEB_CONFIG_SYSTEM build configuration variable, and override it
through the GITWEB_CONFIG_SYSTEM environment variable.
- The gitweb config file is a fragment of perl code. You can set variables
using "our $variable = value"; text from "#" character until the end
of a line is ignored. See perlsyn(1) for details.
See the top of gitweb.perl file for examples of customizable options.
Config file example
~~~~~~~~~~~~~~~~~~~
To enable blame, pickaxe search, and snapshot support, while allowing
individual projects to turn them off, put the following in your
GITWEB_CONFIG file:
$feature{'blame'}{'default'} = [1];
$feature{'blame'}{'override'} = 1;
$feature{'pickaxe'}{'default'} = [1];
$feature{'pickaxe'}{'override'} = 1;
$feature{'snapshot'}{'default'} = ['zip', 'tgz'];
$feature{'snapshot'}{'override'} = 1;
If you allow overriding for the snapshot feature, you can specify which
snapshot formats are globally disabled. You can also add any command line
options you want (such as setting the compression level). For instance,
you can disable Zip compressed snapshots and set GZip to run at level 6 by
adding the following lines to your $GITWEB_CONFIG:
$known_snapshot_formats{'zip'}{'disabled'} = 1;
$known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6'];
Gitweb repositories
-------------------
- By default all git repositories under projectroot are visible and
available to gitweb. The list of projects is generated by default by
scanning the projectroot directory for git repositories (for object
databases to be more exact).
You can provide a pre-generated list of [visible] repositories,
together with information about their owners (the project ownership
defaults to the owner of the repository directory otherwise), by setting
the GITWEB_LIST build configuration variable (or the $projects_list
variable in the gitweb config file) to point to a plain file.
Each line of the projects list file should consist of the url-encoded path
to the project repository database (relative to projectroot), followed
by the url-encoded project owner on the same line (separated by a space).
Spaces in both project path and project owner have to be encoded as either
'%20' or '+'.
Other characters that have to be url-encoded, i.e. replaced by '%'
followed by two-digit character number in octal, are: other whitespace
characters (because they are field separator in a record), plus sign '+'
(because it can be used as replacement for spaces), and percent sign '%'
(which is used for encoding / escaping).
You can generate the projects list index file using the project_index
action (the 'TXT' link on projects list page) directly from gitweb.
- By default, even if a project is not visible on projects list page, you
can view it nevertheless by hand-crafting a gitweb URL. You can set the
GITWEB_STRICT_EXPORT build configuration variable (or the $strict_export
variable in the gitweb config file) to only allow viewing of
repositories also shown on the overview page.
- Alternatively, you can configure gitweb to only list and allow
viewing of the explicitly exported repositories, via the
GITWEB_EXPORT_OK build configuration variable (or the $export_ok
variable in gitweb config file). If it evaluates to true, gitweb
shows repositories only if this file exists in its object database
(if directory has the magic file named $export_ok).
- Finally, it is possible to specify an arbitrary perl subroutine that
will be called for each project to determine if it can be exported.
The subroutine receives an absolute path to the project as its only
parameter.
For example, if you use mod_perl to run the script, and have dumb
http protocol authentication configured for your repositories, you
can use the following hook to allow access only if the user is
authorized to read the files:
$export_auth_hook = sub {
use Apache2::SubRequest ();
use Apache2::Const -compile => qw(HTTP_OK);
my $path = "$_[0]/HEAD";
my $r = Apache2::RequestUtil->request;
my $sub = $r->lookup_file($path);
return $sub->filename eq $path
&& $sub->status == Apache2::Const::HTTP_OK;
};
Generating projects list using gitweb
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We assume that GITWEB_CONFIG has its default Makefile value, namely
gitweb_config.perl. Put the following in gitweb_make_index.perl file:
$GITWEB_CONFIG = "gitweb_config.perl";
do $GITWEB_CONFIG if -e $GITWEB_CONFIG;
$projects_list = $projectroot;
Then create the following script to get list of project in the format
suitable for GITWEB_LIST build configuration variable (or
$projects_list variable in gitweb config):
#!/bin/sh
export GITWEB_CONFIG="gitweb_make_index.perl"
export GATEWAY_INTERFACE="CGI/1.1"
export HTTP_ACCEPT="*/*"
export REQUEST_METHOD="GET"
export QUERY_STRING="a=project_index"
perl -- /var/www/cgi-bin/gitweb.cgi
Requirements
------------
- Core git tools
- Perl
- Perl modules: CGI, Encode, Fcntl, File::Find, File::Basename.
- web server
Example web server configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See also "Webserver configuration" section in README file for gitweb
(in gitweb/README).
- Apache2, gitweb installed as CGI script,
under /var/www/cgi-bin/
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
<Directory "/var/www/cgi-bin">
Options Indexes FollowSymlinks ExecCGI
AllowOverride None
Order allow,deny
Allow from all
</Directory>
- Apache2, gitweb installed as mod_perl legacy script,
under /var/www/perl/
Alias /perl "/var/www/perl"
<Directory "/var/www/perl">
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
PerlOptions +ParseHeaders
Options Indexes FollowSymlinks +ExecCGI
AllowOverride None
Order allow,deny
Allow from all
</Directory>