{
  "ownerDomain": "google.com",
  "name": "genomics",
  "batchPath": "batch",
  "id": "genomics:v1alpha2",
  "documentationLink": "https://cloud.google.com/genomics",
  "revision": "20170608",
  "title": "Genomics API",
  "ownerName": "Google",
  "discoveryVersion": "v1",
  "resources": {
    "pipelines": {
      "methods": {
        "create": {
          "httpMethod": "POST",
          "parameterOrder": [],
          "response": {
            "$ref": "Pipeline"
          },
          "parameters": {},
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "flatPath": "v1alpha2/pipelines",
          "id": "genomics.pipelines.create",
          "path": "v1alpha2/pipelines",
          "request": {
            "$ref": "Pipeline"
          },
          "description": "Creates a pipeline that can be run later. Create takes a Pipeline that\nhas all fields other than `pipelineId` populated, and then returns\nthe same pipeline with `pipelineId` populated. This id can be used\nto run the pipeline.\n\nCaller must have WRITE permission to the project."
        },
        "run": {
          "description": "Runs a pipeline. If `pipelineId` is specified in the request, then\nrun a saved pipeline. If `ephemeralPipeline` is specified, then run\nthat pipeline once without saving a copy.\n\nThe caller must have READ permission to the project where the pipeline\nis stored and WRITE permission to the project where the pipeline will be\nrun, as VMs will be created and storage will be used.\n\nIf a pipeline operation is still running after 6 days, it will be canceled.",
          "request": {
            "$ref": "RunPipelineRequest"
          },
          "httpMethod": "POST",
          "parameterOrder": [],
          "response": {
            "$ref": "Operation"
          },
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/compute",
            "https://www.googleapis.com/auth/genomics"
          ],
          "parameters": {},
          "flatPath": "v1alpha2/pipelines:run",
          "id": "genomics.pipelines.run",
          "path": "v1alpha2/pipelines:run"
        },
        "get": {
          "description": "Retrieves a pipeline based on ID.\n\nCaller must have READ permission to the project.",
          "response": {
            "$ref": "Pipeline"
          },
          "parameterOrder": [
            "pipelineId"
          ],
          "httpMethod": "GET",
          "parameters": {
            "pipelineId": {
              "location": "path",
              "description": "Caller must have READ access to the project in which this pipeline\nis defined.",
              "required": true,
              "type": "string"
            }
          },
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "flatPath": "v1alpha2/pipelines/{pipelineId}",
          "path": "v1alpha2/pipelines/{pipelineId}",
          "id": "genomics.pipelines.get"
        },
        "setOperationStatus": {
          "parameters": {},
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "flatPath": "v1alpha2/pipelines:setOperationStatus",
          "path": "v1alpha2/pipelines:setOperationStatus",
          "id": "genomics.pipelines.setOperationStatus",
          "request": {
            "$ref": "SetOperationStatusRequest"
          },
          "description": "Sets status of a given operation. Any new timestamps (as determined by\ndescription) are appended to TimestampEvents. Should only be called by VMs\ncreated by the Pipelines Service and not by end users.",
          "response": {
            "$ref": "Empty"
          },
          "parameterOrder": [],
          "httpMethod": "PUT"
        },
        "getControllerConfig": {
          "description": "Gets controller configuration information. Should only be called\nby VMs created by the Pipelines Service and not by end users.",
          "parameterOrder": [],
          "response": {
            "$ref": "ControllerConfig"
          },
          "httpMethod": "GET",
          "parameters": {
            "operationId": {
              "location": "query",
              "description": "The operation to retrieve controller configuration for.",
              "type": "string"
            },
            "validationToken": {
              "format": "uint64",
              "type": "string",
              "location": "query"
            }
          },
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "flatPath": "v1alpha2/pipelines:getControllerConfig",
          "path": "v1alpha2/pipelines:getControllerConfig",
          "id": "genomics.pipelines.getControllerConfig"
        },
        "delete": {
          "response": {
            "$ref": "Empty"
          },
          "parameterOrder": [
            "pipelineId"
          ],
          "httpMethod": "DELETE",
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "parameters": {
            "pipelineId": {
              "description": "Caller must have WRITE access to the project in which this pipeline\nis defined.",
              "required": true,
              "type": "string",
              "location": "path"
            }
          },
          "flatPath": "v1alpha2/pipelines/{pipelineId}",
          "path": "v1alpha2/pipelines/{pipelineId}",
          "id": "genomics.pipelines.delete",
          "description": "Deletes a pipeline based on ID.\n\nCaller must have WRITE permission to the project."
        },
        "list": {
          "id": "genomics.pipelines.list",
          "path": "v1alpha2/pipelines",
          "description": "Lists pipelines.\n\nCaller must have READ permission to the project.",
          "httpMethod": "GET",
          "response": {
            "$ref": "ListPipelinesResponse"
          },
          "parameterOrder": [],
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "parameters": {
            "pageToken": {
              "description": "Token to use to indicate where to start getting results.\nIf unspecified, returns the first page of results.",
              "type": "string",
              "location": "query"
            },
            "pageSize": {
              "location": "query",
              "description": "Number of pipelines to return at once. Defaults to 256, and max\nis 2048.",
              "format": "int32",
              "type": "integer"
            },
            "projectId": {
              "description": "Required. The name of the project to search for pipelines. Caller\nmust have READ access to this project.",
              "type": "string",
              "location": "query"
            },
            "namePrefix": {
              "location": "query",
              "description": "Pipelines with names that match this prefix should be\nreturned.  If unspecified, all pipelines in the project, up to\n`pageSize`, will be returned.",
              "type": "string"
            }
          },
          "flatPath": "v1alpha2/pipelines"
        }
      }
    },
    "operations": {
      "methods": {
        "cancel": {
          "httpMethod": "POST",
          "parameterOrder": [
            "name"
          ],
          "response": {
            "$ref": "Empty"
          },
          "parameters": {
            "name": {
              "pattern": "^operations/.+$",
              "location": "path",
              "description": "The name of the operation resource to be cancelled.",
              "required": true,
              "type": "string"
            }
          },
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "flatPath": "v1alpha2/operations/{operationsId}:cancel",
          "id": "genomics.operations.cancel",
          "path": "v1alpha2/{+name}:cancel",
          "request": {
            "$ref": "CancelOperationRequest"
          },
          "description": "Starts asynchronous cancellation on a long-running operation. The server makes a best effort to cancel the operation, but success is not guaranteed. Clients may use Operations.GetOperation or Operations.ListOperations to check whether the cancellation succeeded or the operation completed despite cancellation."
        },
        "list": {
          "path": "v1alpha2/{+name}",
          "id": "genomics.operations.list",
          "description": "Lists operations that match the specified filter in the request.",
          "response": {
            "$ref": "ListOperationsResponse"
          },
          "parameterOrder": [
            "name"
          ],
          "httpMethod": "GET",
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "parameters": {
            "name": {
              "pattern": "^operations$",
              "location": "path",
              "description": "The name of the operation's parent resource.",
              "required": true,
              "type": "string"
            },
            "pageToken": {
              "location": "query",
              "description": "The standard list page token.",
              "type": "string"
            },
            "pageSize": {
              "description": "The maximum number of results to return. If unspecified, defaults to\n256. The maximum value is 2048.",
              "format": "int32",
              "type": "integer",
              "location": "query"
            },
            "filter": {
              "description": "A string for filtering Operations.\nThe following filter fields are supported&#58;\n\n* projectId&#58; Required. Corresponds to\n  OperationMetadata.projectId.\n* createTime&#58; The time this job was created, in seconds from the\n  [epoch](http://en.wikipedia.org/wiki/Unix_time). Can use `\u003e=` and/or `\u003c=`\n  operators.\n* status&#58; Can be `RUNNING`, `SUCCESS`, `FAILURE`, or `CANCELED`. Only\n  one status may be specified.\n* labels.key where key is a label key.\n\nExamples&#58;\n\n* `projectId = my-project AND createTime \u003e= 1432140000`\n* `projectId = my-project AND createTime \u003e= 1432140000 AND createTime \u003c= 1432150000 AND status = RUNNING`\n* `projectId = my-project AND labels.color = *`\n* `projectId = my-project AND labels.color = red`",
              "type": "string",
              "location": "query"
            }
          },
          "flatPath": "v1alpha2/operations"
        },
        "get": {
          "description": "Gets the latest state of a long-running operation.  Clients can use this\nmethod to poll the operation result at intervals as recommended by the API\nservice.",
          "response": {
            "$ref": "Operation"
          },
          "httpMethod": "GET",
          "parameterOrder": [
            "name"
          ],
          "scopes": [
            "https://www.googleapis.com/auth/cloud-platform",
            "https://www.googleapis.com/auth/genomics"
          ],
          "parameters": {
            "name": {
              "location": "path",
              "description": "The name of the operation resource.",
              "required": true,
              "type": "string",
              "pattern": "^operations/.+$"
            }
          },
          "flatPath": "v1alpha2/operations/{operationsId}",
          "path": "v1alpha2/{+name}",
          "id": "genomics.operations.get"
        }
      }
    }
  },
  "parameters": {
    "upload_protocol": {
      "type": "string",
      "location": "query",
      "description": "Upload protocol for media (e.g. \"raw\", \"multipart\")."
    },
    "prettyPrint": {
      "location": "query",
      "description": "Returns response with indentations and line breaks.",
      "type": "boolean",
      "default": "true"
    },
    "fields": {
      "description": "Selector specifying which fields to include in a partial response.",
      "type": "string",
      "location": "query"
    },
    "uploadType": {
      "location": "query",
      "description": "Legacy upload protocol for media (e.g. \"media\", \"multipart\").",
      "type": "string"
    },
    "$.xgafv": {
      "description": "V1 error format.",
      "type": "string",
      "enumDescriptions": [
        "v1 error format",
        "v2 error format"
      ],
      "location": "query",
      "enum": [
        "1",
        "2"
      ]
    },
    "callback": {
      "description": "JSONP",
      "type": "string",
      "location": "query"
    },
    "alt": {
      "enumDescriptions": [
        "Responses with Content-Type of application/json",
        "Media download with context-dependent Content-Type",
        "Responses with Content-Type of application/x-protobuf"
      ],
      "location": "query",
      "description": "Data format for response.",
      "default": "json",
      "enum": [
        "json",
        "media",
        "proto"
      ],
      "type": "string"
    },
    "key": {
      "location": "query",
      "description": "API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token.",
      "type": "string"
    },
    "access_token": {
      "location": "query",
      "description": "OAuth access token.",
      "type": "string"
    },
    "quotaUser": {
      "location": "query",
      "description": "Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters.",
      "type": "string"
    },
    "pp": {
      "location": "query",
      "description": "Pretty-print response.",
      "type": "boolean",
      "default": "true"
    },
    "oauth_token": {
      "description": "OAuth 2.0 token for the current user.",
      "type": "string",
      "location": "query"
    },
    "bearer_token": {
      "description": "OAuth bearer token.",
      "type": "string",
      "location": "query"
    }
  },
  "schemas": {
    "PipelineParameter": {
      "description": "Parameters facilitate setting and delivering data into the\npipeline's execution environment. They are defined at create time,\nwith optional defaults, and can be overridden at run time.\n\nIf `localCopy` is unset, then the parameter specifies a string that\nis passed as-is into the pipeline, as the value of the environment\nvariable with the given name.  A default value can be optionally\nspecified at create time. The default can be overridden at run time\nusing the inputs map. If no default is given, a value must be\nsupplied at runtime.\n\nIf `localCopy` is defined, then the parameter specifies a data\nsource or sink, both in Google Cloud Storage and on the Docker container\nwhere the pipeline computation is run. The service account associated with\nthe Pipeline (by\ndefault the project's Compute Engine service account) must have access to the\nGoogle Cloud Storage paths.\n\nAt run time, the Google Cloud Storage paths can be overridden if a default\nwas provided at create time, or must be set otherwise. The pipeline runner\nshould add a key/value pair to either the inputs or outputs map. The\nindicated data copies will be carried out before/after pipeline execution,\njust as if the corresponding arguments were provided to `gsutil cp`.\n\nFor example: Given the following `PipelineParameter`, specified\nin the `inputParameters` list:\n\n```\n{name: \"input_file\", localCopy: {path: \"file.txt\", disk: \"pd1\"}}\n```\n\nwhere `disk` is defined in the `PipelineResources` object as:\n\n```\n{name: \"pd1\", mountPoint: \"/mnt/disk/\"}\n```\n\nWe create a disk named `pd1`, mount it on the host VM, and map\n`/mnt/pd1` to `/mnt/disk` in the docker container.  At\nruntime, an entry for `input_file` would be required in the inputs\nmap, such as:\n\n```\n  inputs[\"input_file\"] = \"gs://my-bucket/bar.txt\"\n```\n\nThis would generate the following gsutil call:\n\n```\n  gsutil cp gs://my-bucket/bar.txt /mnt/pd1/file.txt\n```\n\nThe file `/mnt/pd1/file.txt` maps to `/mnt/disk/file.txt` in the\nDocker container. Acceptable paths are:\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\u003cth\u003eGoogle Cloud storage path\u003c/th\u003e\u003cth\u003eLocal path\u003c/th\u003e\u003c/tr\u003e\n  \u003c/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003ctd\u003efile\u003c/td\u003e\u003ctd\u003efile\u003c/td\u003e\u003c/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eglob\u003c/td\u003e\u003ctd\u003edirectory\u003c/td\u003e\u003c/tr\u003e\n  \u003c/tbody\u003e\n\u003c/table\u003e\n\nFor outputs, the direction of the copy is reversed:\n\n```\n  gsutil cp /mnt/disk/file.txt gs://my-bucket/bar.txt\n```\n\nAcceptable paths are:\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\u003cth\u003eLocal path\u003c/th\u003e\u003cth\u003eGoogle Cloud Storage path\u003c/th\u003e\u003c/tr\u003e\n  \u003c/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003ctd\u003efile\u003c/td\u003e\u003ctd\u003efile\u003c/td\u003e\u003c/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003efile\u003c/td\u003e\n      \u003ctd\u003edirectory - directory must already exist\u003c/td\u003e\n    \u003c/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eglob\u003c/td\u003e\n      \u003ctd\u003edirectory - directory will be created if it doesn't exist\u003c/td\u003e\u003c/tr\u003e\n  \u003c/tbody\u003e\n\u003c/table\u003e\n\nOne restriction due to docker limitations, is that for outputs that are found\non the boot disk, the local path cannot be a glob and must be a file.",
      "type": "object",
      "properties": {
        "defaultValue": {
          "description": "The default value for this parameter. Can be overridden at runtime.\nIf `localCopy` is present, then this must be a Google Cloud Storage path\nbeginning with `gs://`.",
          "type": "string"
        },
        "name": {
          "description": "Required. Name of the parameter - the pipeline runner uses this string\nas the key to the input and output maps in RunPipeline.",
          "type": "string"
        },
        "description": {
          "description": "Human-readable description.",
          "type": "string"
        },
        "localCopy": {
          "$ref": "LocalCopy",
          "description": "If present, this parameter is marked for copying to and from the VM.\n`LocalCopy` indicates where on the VM the file should be. The value\ngiven to this parameter (either at runtime or using `defaultValue`)\nmust be the remote path where the file should be."
        }
      },
      "id": "PipelineParameter"
    },
    "LoggingOptions": {
      "description": "The logging options for the pipeline run.",
      "type": "object",
      "properties": {
        "gcsPath": {
          "description": "The location in Google Cloud Storage to which the pipeline logs\nwill be copied. Can be specified as a fully qualified directory\npath, in which case logs will be output with a unique identifier\nas the filename in that directory, or as a fully specified path,\nwhich must end in `.log`, in which case that path will be\nused, and the user must ensure that logs are not\noverwritten. Stdout and stderr logs from the run are also\ngenerated and output as `-stdout.log` and `-stderr.log`.",
          "type": "string"
        }
      },
      "id": "LoggingOptions"
    },
    "RunPipelineRequest": {
      "description": "The request to run a pipeline. If `pipelineId` is specified, it\nrefers to a saved pipeline created with CreatePipeline and set as\nthe `pipelineId` of the returned Pipeline object. If\n`ephemeralPipeline` is specified, that pipeline is run once\nwith the given args and not saved. It is an error to specify both\n`pipelineId` and `ephemeralPipeline`. `pipelineArgs`\nmust be specified.",
      "type": "object",
      "properties": {
        "pipelineArgs": {
          "description": "The arguments to use when running this pipeline.",
          "$ref": "RunPipelineArgs"
        },
        "pipelineId": {
          "description": "The already created pipeline to run.",
          "type": "string"
        },
        "ephemeralPipeline": {
          "$ref": "Pipeline",
          "description": "A new pipeline object to run once and then delete."
        }
      },
      "id": "RunPipelineRequest"
    },
    "CancelOperationRequest": {
      "type": "object",
      "properties": {},
      "id": "CancelOperationRequest",
      "description": "The request message for Operations.CancelOperation."
    },
    "RuntimeMetadata": {
      "description": "Runtime metadata that will be populated in the\nruntimeMetadata\nfield of the Operation associated with a RunPipeline execution.",
      "type": "object",
      "properties": {
        "computeEngine": {
          "$ref": "ComputeEngine",
          "description": "Execution information specific to Google Compute Engine."
        }
      },
      "id": "RuntimeMetadata"
    },
    "Operation": {
      "description": "This resource represents a long-running operation that is the result of a\nnetwork API call.",
      "type": "object",
      "properties": {
        "error": {
          "description": "The error result of the operation in case of failure or cancellation.",
          "$ref": "Status"
        },
        "metadata": {
          "description": "An OperationMetadata object. This will always be returned with the Operation.",
          "type": "object",
          "additionalProperties": {
            "description": "Properties of the object. Contains field @type with type URL.",
            "type": "any"
          }
        },
        "done": {
          "description": "If the value is `false`, it means the operation is still in progress.\nIf true, the operation is completed, and either `error` or `response` is\navailable.",
          "type": "boolean"
        },
        "response": {
          "additionalProperties": {
            "description": "Properties of the object. Contains field @type with type URL.",
            "type": "any"
          },
          "description": "If importing ReadGroupSets, an ImportReadGroupSetsResponse is returned. If importing Variants, an ImportVariantsResponse is returned. For pipelines and exports, an empty response is returned.",
          "type": "object"
        },
        "name": {
          "description": "The server-assigned name, which is only unique within the same service that originally returns it. For example&#58; `operations/CJHU7Oi_ChDrveSpBRjfuL-qzoWAgEw`",
          "type": "string"
        }
      },
      "id": "Operation"
    },
    "ImportReadGroupSetsResponse": {
      "description": "The read group set import response.",
      "type": "object",
      "properties": {
        "readGroupSetIds": {
          "description": "IDs of the read group sets that were created.",
          "type": "array",
          "items": {
            "type": "string"
          }
        }
      },
      "id": "ImportReadGroupSetsResponse"
    },
    "Status": {
      "properties": {
        "details": {
          "description": "A list of messages that carry the error details.  There will be a\ncommon set of message types for APIs to use.",
          "type": "array",
          "items": {
            "additionalProperties": {
              "description": "Properties of the object. Contains field @type with type URL.",
              "type": "any"
            },
            "type": "object"
          }
        },
        "code": {
          "description": "The status code, which should be an enum value of google.rpc.Code.",
          "format": "int32",
          "type": "integer"
        },
        "message": {
          "description": "A developer-facing error message, which should be in English. Any\nuser-facing error message should be localized and sent in the\ngoogle.rpc.Status.details field, or localized by the client.",
          "type": "string"
        }
      },
      "id": "Status",
      "description": "The `Status` type defines a logical error model that is suitable for different\nprogramming environments, including REST APIs and RPC APIs. It is used by\n[gRPC](https://github.com/grpc). The error model is designed to be:\n\n- Simple to use and understand for most users\n- Flexible enough to meet unexpected needs\n\n# Overview\n\nThe `Status` message contains three pieces of data: error code, error message,\nand error details. The error code should be an enum value of\ngoogle.rpc.Code, but it may accept additional error codes if needed.  The\nerror message should be a developer-facing English message that helps\ndevelopers *understand* and *resolve* the error. If a localized user-facing\nerror message is needed, put the localized message in the error details or\nlocalize it in the client. The optional error details may contain arbitrary\ninformation about the error. There is a predefined set of error detail types\nin the package `google.rpc` that can be used for common error conditions.\n\n# Language mapping\n\nThe `Status` message is the logical representation of the error model, but it\nis not necessarily the actual wire format. When the `Status` message is\nexposed in different client libraries and different wire protocols, it can be\nmapped differently. For example, it will likely be mapped to some exceptions\nin Java, but more likely mapped to some error codes in C.\n\n# Other uses\n\nThe error model and the `Status` message can be used in a variety of\nenvironments, either with or without APIs, to provide a\nconsistent developer experience across different environments.\n\nExample uses of this error model include:\n\n- Partial errors. If a service needs to return partial errors to the client,\n    it may embed the `Status` in the normal response to indicate the partial\n    errors.\n\n- Workflow errors. A typical workflow has multiple steps. Each step may\n    have a `Status` message for error reporting.\n\n- Batch operations. If a client uses batch request and batch response, the\n    `Status` message should be used directly inside batch response, one for\n    each error sub-response.\n\n- Asynchronous operations. If an API call embeds asynchronous operation\n    results in its response, the status of those operations should be\n    represented directly using the `Status` message.\n\n- Logging. If some API errors are stored in logs, the message `Status` could\n    be used directly after any stripping needed for security/privacy reasons.",
      "type": "object"
    },
    "ServiceAccount": {
      "description": "A Google Cloud Service Account.",
      "type": "object",
      "properties": {
        "email": {
          "description": "Email address of the service account. Defaults to `default`,\nwhich uses the compute service account associated with the project.",
          "type": "string"
        },
        "scopes": {
          "type": "array",
          "items": {
            "type": "string"
          },
          "description": "List of scopes to be enabled for this service account on the VM.\nThe following scopes are automatically included:\n\n* https://www.googleapis.com/auth/compute\n* https://www.googleapis.com/auth/devstorage.full_control\n* https://www.googleapis.com/auth/genomics\n* https://www.googleapis.com/auth/logging.write\n* https://www.googleapis.com/auth/monitoring.write"
        }
      },
      "id": "ServiceAccount"
    },
    "Pipeline": {
      "id": "Pipeline",
      "description": "The pipeline object. Represents a transformation from a set of input\nparameters to a set of output parameters. The transformation is defined\nas a docker image and command to run within that image. Each pipeline\nis run on a Google Compute Engine VM. A pipeline can be created with the\n`create` method and then later run with the `run` method, or a pipeline can\nbe defined and run all at once with the `run` method.",
      "type": "object",
      "properties": {
        "projectId": {
          "description": "Required. The project in which to create the pipeline. The caller must have\nWRITE access.",
          "type": "string"
        },
        "pipelineId": {
          "description": "Unique pipeline id that is generated by the service when CreatePipeline\nis called. Cannot be specified in the Pipeline used in the\nCreatePipelineRequest, and will be populated in the response to\nCreatePipeline and all subsequent Get and List calls. Indicates that the\nservice has registered this pipeline.",
          "type": "string"
        },
        "outputParameters": {
          "description": "Output parameters of the pipeline.",
          "type": "array",
          "items": {
            "$ref": "PipelineParameter"
          }
        },
        "docker": {
          "$ref": "DockerExecutor",
          "description": "Specifies the docker run information."
        },
        "description": {
          "type": "string",
          "description": "User-specified description."
        },
        "inputParameters": {
          "description": "Input parameters of the pipeline.",
          "type": "array",
          "items": {
            "$ref": "PipelineParameter"
          }
        },
        "resources": {
          "description": "Required. Specifies resource requirements for the pipeline run.\nRequired fields:\n\n*\nminimumCpuCores\n\n*\nminimumRamGb",
          "$ref": "PipelineResources"
        },
        "name": {
          "description": "Required. A user specified pipeline name that does not have to be unique.\nThis name can be used for filtering Pipelines in ListPipelines.",
          "type": "string"
        }
      }
    },
    "PipelineResources": {
      "type": "object",
      "properties": {
        "zones": {
          "description": "List of Google Compute Engine availability zones to which resource\ncreation will restricted. If empty, any zone may be chosen.",
          "type": "array",
          "items": {
            "type": "string"
          }
        },
        "minimumCpuCores": {
          "description": "The minimum number of cores to use. Defaults to 1.",
          "format": "int32",
          "type": "integer"
        },
        "noAddress": {
          "description": "Whether to assign an external IP to the instance. This is an experimental\nfeature that may go away. Defaults to false.\nCorresponds to `--no_address` flag for [gcloud compute instances create]\n(https://cloud.google.com/sdk/gcloud/reference/compute/instances/create).\nIn order to use this, must be true for both create time and run time.\nCannot be true at run time if false at create time. If you need to ssh into\na private IP VM for debugging, you can ssh to a public VM and then ssh into\nthe private VM's Internal IP.  If noAddress is set, this pipeline run may\nonly load docker images from Google Container Registry and not Docker Hub.\nBefore using this, you must\n[configure access to Google services from internal IPs](https://cloud.google.com/compute/docs/configure-private-google-access#configuring_access_to_google_services_from_internal_ips).",
          "type": "boolean"
        },
        "disks": {
          "description": "Disks to attach.",
          "type": "array",
          "items": {
            "$ref": "Disk"
          }
        },
        "bootDiskSizeGb": {
          "description": "The size of the boot disk. Defaults to 10 (GB).",
          "format": "int32",
          "type": "integer"
        },
        "minimumRamGb": {
          "description": "The minimum amount of RAM to use. Defaults to 3.75 (GB)",
          "format": "double",
          "type": "number"
        },
        "preemptible": {
          "description": "Whether to use preemptible VMs. Defaults to `false`. In order to use this,\nmust be true for both create time and run time. Cannot be true at run time\nif false at create time.",
          "type": "boolean"
        }
      },
      "id": "PipelineResources",
      "description": "The system resources for the pipeline run."
    },
    "ControllerConfig": {
      "description": "Stores the information that the controller will fetch from the\nserver in order to run. Should only be used by VMs created by the\nPipelines Service and not by end users.",
      "type": "object",
      "properties": {
        "gcsLogPath": {
          "type": "string"
        },
        "gcsSources": {
          "type": "object",
          "additionalProperties": {
            "$ref": "RepeatedString"
          }
        },
        "gcsSinks": {
          "type": "object",
          "additionalProperties": {
            "$ref": "RepeatedString"
          }
        },
        "disks": {
          "type": "object",
          "additionalProperties": {
            "type": "string"
          }
        },
        "machineType": {
          "type": "string"
        },
        "cmd": {
          "type": "string"
        },
        "vars": {
          "type": "object",
          "additionalProperties": {
            "type": "string"
          }
        },
        "image": {
          "type": "string"
        }
      },
      "id": "ControllerConfig"
    },
    "OperationEvent": {
      "description": "An event that occurred during an Operation.",
      "type": "object",
      "properties": {
        "startTime": {
          "description": "Optional time of when event started.",
          "format": "google-datetime",
          "type": "string"
        },
        "description": {
          "description": "Required description of event.",
          "type": "string"
        },
        "endTime": {
          "description": "Optional time of when event finished. An event can have a start time and no\nfinish time. If an event has a finish time, there must be a start time.",
          "format": "google-datetime",
          "type": "string"
        }
      },
      "id": "OperationEvent"
    },
    "ListOperationsResponse": {
      "description": "The response message for Operations.ListOperations.",
      "type": "object",
      "properties": {
        "nextPageToken": {
          "description": "The standard List next-page token.",
          "type": "string"
        },
        "operations": {
          "description": "A list of operations that matches the specified filter in the request.",
          "type": "array",
          "items": {
            "$ref": "Operation"
          }
        }
      },
      "id": "ListOperationsResponse"
    },
    "RepeatedString": {
      "type": "object",
      "properties": {
        "values": {
          "type": "array",
          "items": {
            "type": "string"
          }
        }
      },
      "id": "RepeatedString"
    },
    "OperationMetadata": {
      "description": "Metadata describing an Operation.",
      "type": "object",
      "properties": {
        "labels": {
          "additionalProperties": {
            "type": "string"
          },
          "description": "Optionally provided by the caller when submitting the request that creates\nthe operation.",
          "type": "object"
        },
        "createTime": {
          "description": "The time at which the job was submitted to the Genomics service.",
          "format": "google-datetime",
          "type": "string"
        },
        "projectId": {
          "description": "The Google Cloud Project in which the job is scoped.",
          "type": "string"
        },
        "clientId": {
          "description": "This field is deprecated. Use `labels` instead. Optionally provided by the\ncaller when submitting the request that creates the operation.",
          "type": "string"
        },
        "endTime": {
          "description": "The time at which the job stopped running.",
          "format": "google-datetime",
          "type": "string"
        },
        "events": {
          "description": "Optional event messages that were generated during the job's execution.\nThis also contains any warnings that were generated during import\nor export.",
          "type": "array",
          "items": {
            "$ref": "OperationEvent"
          }
        },
        "startTime": {
          "description": "The time at which the job began to run.",
          "format": "google-datetime",
          "type": "string"
        },
        "request": {
          "additionalProperties": {
            "description": "Properties of the object. Contains field @type with type URL.",
            "type": "any"
          },
          "description": "The original request that started the operation. Note that this will be in\ncurrent version of the API. If the operation was started with v1beta2 API\nand a GetOperation is performed on v1 API, a v1 request will be returned.",
          "type": "object"
        },
        "runtimeMetadata": {
          "description": "Runtime metadata on this Operation.",
          "type": "object",
          "additionalProperties": {
            "description": "Properties of the object. Contains field @type with type URL.",
            "type": "any"
          }
        }
      },
      "id": "OperationMetadata"
    },
    "ListPipelinesResponse": {
      "id": "ListPipelinesResponse",
      "description": "The response of ListPipelines. Contains at most `pageSize`\npipelines. If it contains `pageSize` pipelines, and more pipelines\nexist, then `nextPageToken` will be populated and should be\nused as the `pageToken` argument to a subsequent ListPipelines\nrequest.",
      "type": "object",
      "properties": {
        "nextPageToken": {
          "description": "The token to use to get the next page of results.",
          "type": "string"
        },
        "pipelines": {
          "description": "The matched pipelines.",
          "type": "array",
          "items": {
            "$ref": "Pipeline"
          }
        }
      }
    },
    "RunPipelineArgs": {
      "description": "The pipeline run arguments.",
      "type": "object",
      "properties": {
        "logging": {
          "$ref": "LoggingOptions",
          "description": "Required. Logging options. Used by the service to communicate results\nto the user."
        },
        "labels": {
          "description": "Labels to apply to this pipeline run. Labels will also be applied to\ncompute resources (VM, disks) created by this pipeline run. When listing\noperations, operations can filtered by labels.\nLabel keys may not be empty; label values may be empty. Non-empty labels\nmust be 1-63 characters long, and comply with [RFC1035]\n(https://www.ietf.org/rfc/rfc1035.txt).\nSpecifically, the name must be 1-63 characters long and match the regular\nexpression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first\ncharacter must be a lowercase letter, and all following characters must be\na dash, lowercase letter, or digit, except the last character, which cannot\nbe a dash.",
          "type": "object",
          "additionalProperties": {
            "type": "string"
          }
        },
        "keepVmAliveOnFailureDuration": {
          "description": "How long to keep the VM up after a failure (for example docker command\nfailed, copying input or output files failed, etc). While the VM is up, one\ncan ssh into the VM to debug. Default is 0; maximum allowed value is 1 day.",
          "format": "google-duration",
          "type": "string"
        },
        "resources": {
          "$ref": "PipelineResources",
          "description": "Specifies resource requirements/overrides for the pipeline run."
        },
        "outputs": {
          "additionalProperties": {
            "type": "string"
          },
          "description": "Pipeline output arguments; keys are defined in the pipeline\ndocumentation.  All output parameters of without default values\nmust be specified.  If parameters with defaults are specified\nhere, the defaults will be overridden.",
          "type": "object"
        },
        "projectId": {
          "description": "Required. The project in which to run the pipeline. The caller must have\nWRITER access to all Google Cloud services and resources (e.g. Google\nCompute Engine) will be used.",
          "type": "string"
        },
        "clientId": {
          "description": "This field is deprecated. Use `labels` instead. Client-specified pipeline\noperation identifier.",
          "type": "string"
        },
        "serviceAccount": {
          "description": "The Google Cloud Service Account that will be used to access data and\nservices. By default, the compute service account associated with\n`projectId` is used.",
          "$ref": "ServiceAccount"
        },
        "inputs": {
          "additionalProperties": {
            "type": "string"
          },
          "description": "Pipeline input arguments; keys are defined in the pipeline documentation.\nAll input parameters that do not have default values  must be specified.\nIf parameters with defaults are specified here, the defaults will be\noverridden.",
          "type": "object"
        }
      },
      "id": "RunPipelineArgs"
    },
    "SetOperationStatusRequest": {
      "description": "Request to set operation status. Should only be used by VMs\ncreated by the Pipelines Service and not by end users.",
      "type": "object",
      "properties": {
        "operationId": {
          "type": "string"
        },
        "errorMessage": {
          "type": "string"
        },
        "validationToken": {
          "format": "uint64",
          "type": "string"
        },
        "errorCode": {
          "enumDescriptions": [
            "Not an error; returned on success\n\nHTTP Mapping: 200 OK",
            "The operation was cancelled, typically by the caller.\n\nHTTP Mapping: 499 Client Closed Request",
            "Unknown error.  For example, this error may be returned when\na `Status` value received from another address space belongs to\nan error space that is not known in this address space.  Also\nerrors raised by APIs that do not return enough error information\nmay be converted to this error.\n\nHTTP Mapping: 500 Internal Server Error",
            "The client specified an invalid argument.  Note that this differs\nfrom `FAILED_PRECONDITION`.  `INVALID_ARGUMENT` indicates arguments\nthat are problematic regardless of the state of the system\n(e.g., a malformed file name).\n\nHTTP Mapping: 400 Bad Request",
            "The deadline expired before the operation could complete. For operations\nthat change the state of the system, this error may be returned\neven if the operation has completed successfully.  For example, a\nsuccessful response from a server could have been delayed long\nenough for the deadline to expire.\n\nHTTP Mapping: 504 Gateway Timeout",
            "Some requested entity (e.g., file or directory) was not found.\n\nNote to server developers: if a request is denied for an entire class\nof users, such as gradual feature rollout or undocumented whitelist,\n`NOT_FOUND` may be used. If a request is denied for some users within\na class of users, such as user-based access control, `PERMISSION_DENIED`\nmust be used.\n\nHTTP Mapping: 404 Not Found",
            "The entity that a client attempted to create (e.g., file or directory)\nalready exists.\n\nHTTP Mapping: 409 Conflict",
            "The caller does not have permission to execute the specified\noperation. `PERMISSION_DENIED` must not be used for rejections\ncaused by exhausting some resource (use `RESOURCE_EXHAUSTED`\ninstead for those errors). `PERMISSION_DENIED` must not be\nused if the caller can not be identified (use `UNAUTHENTICATED`\ninstead for those errors). This error code does not imply the\nrequest is valid or the requested entity exists or satisfies\nother pre-conditions.\n\nHTTP Mapping: 403 Forbidden",
            "The request does not have valid authentication credentials for the\noperation.\n\nHTTP Mapping: 401 Unauthorized",
            "Some resource has been exhausted, perhaps a per-user quota, or\nperhaps the entire file system is out of space.\n\nHTTP Mapping: 429 Too Many Requests",
            "The operation was rejected because the system is not in a state\nrequired for the operation's execution.  For example, the directory\nto be deleted is non-empty, an rmdir operation is applied to\na non-directory, etc.\n\nService implementors can use the following guidelines to decide\nbetween `FAILED_PRECONDITION`, `ABORTED`, and `UNAVAILABLE`:\n (a) Use `UNAVAILABLE` if the client can retry just the failing call.\n (b) Use `ABORTED` if the client should retry at a higher level\n     (e.g., when a client-specified test-and-set fails, indicating the\n     client should restart a read-modify-write sequence).\n (c) Use `FAILED_PRECONDITION` if the client should not retry until\n     the system state has been explicitly fixed.  E.g., if an \"rmdir\"\n     fails because the directory is non-empty, `FAILED_PRECONDITION`\n     should be returned since the client should not retry unless\n     the files are deleted from the directory.\n\nHTTP Mapping: 400 Bad Request",
            "The operation was aborted, typically due to a concurrency issue such as\na sequencer check failure or transaction abort.\n\nSee the guidelines above for deciding between `FAILED_PRECONDITION`,\n`ABORTED`, and `UNAVAILABLE`.\n\nHTTP Mapping: 409 Conflict",
            "The operation was attempted past the valid range.  E.g., seeking or\nreading past end-of-file.\n\nUnlike `INVALID_ARGUMENT`, this error indicates a problem that may\nbe fixed if the system state changes. For example, a 32-bit file\nsystem will generate `INVALID_ARGUMENT` if asked to read at an\noffset that is not in the range [0,2^32-1], but it will generate\n`OUT_OF_RANGE` if asked to read from an offset past the current\nfile size.\n\nThere is a fair bit of overlap between `FAILED_PRECONDITION` and\n`OUT_OF_RANGE`.  We recommend using `OUT_OF_RANGE` (the more specific\nerror) when it applies so that callers who are iterating through\na space can easily look for an `OUT_OF_RANGE` error to detect when\nthey are done.\n\nHTTP Mapping: 400 Bad Request",
            "The operation is not implemented or is not supported/enabled in this\nservice.\n\nHTTP Mapping: 501 Not Implemented",
            "Internal errors.  This means that some invariants expected by the\nunderlying system have been broken.  This error code is reserved\nfor serious errors.\n\nHTTP Mapping: 500 Internal Server Error",
            "The service is currently unavailable.  This is most likely a\ntransient condition, which can be corrected by retrying with\na backoff.\n\nSee the guidelines above for deciding between `FAILED_PRECONDITION`,\n`ABORTED`, and `UNAVAILABLE`.\n\nHTTP Mapping: 503 Service Unavailable",
            "Unrecoverable data loss or corruption.\n\nHTTP Mapping: 500 Internal Server Error"
          ],
          "enum": [
            "OK",
            "CANCELLED",
            "UNKNOWN",
            "INVALID_ARGUMENT",
            "DEADLINE_EXCEEDED",
            "NOT_FOUND",
            "ALREADY_EXISTS",
            "PERMISSION_DENIED",
            "UNAUTHENTICATED",
            "RESOURCE_EXHAUSTED",
            "FAILED_PRECONDITION",
            "ABORTED",
            "OUT_OF_RANGE",
            "UNIMPLEMENTED",
            "INTERNAL",
            "UNAVAILABLE",
            "DATA_LOSS"
          ],
          "type": "string"
        },
        "timestampEvents": {
          "type": "array",
          "items": {
            "$ref": "TimestampEvent"
          }
        }
      },
      "id": "SetOperationStatusRequest"
    },
    "ImportVariantsResponse": {
      "description": "The variant data import response.",
      "type": "object",
      "properties": {
        "callSetIds": {
          "description": "IDs of the call sets created during the import.",
          "type": "array",
          "items": {
            "type": "string"
          }
        }
      },
      "id": "ImportVariantsResponse"
    },
    "ComputeEngine": {
      "type": "object",
      "properties": {
        "zone": {
          "description": "The availability zone in which the instance resides.",
          "type": "string"
        },
        "machineType": {
          "description": "The machine type of the instance.",
          "type": "string"
        },
        "diskNames": {
          "description": "The names of the disks that were created for this pipeline.",
          "type": "array",
          "items": {
            "type": "string"
          }
        },
        "instanceName": {
          "description": "The instance on which the operation is running.",
          "type": "string"
        }
      },
      "id": "ComputeEngine",
      "description": "Describes a Compute Engine resource that is being managed by a running\npipeline."
    },
    "TimestampEvent": {
      "id": "TimestampEvent",
      "description": "Stores the list of events and times they occured for major events in job\nexecution.",
      "type": "object",
      "properties": {
        "timestamp": {
          "description": "The time this event occured.",
          "format": "google-datetime",
          "type": "string"
        },
        "description": {
          "description": "String indicating the type of event",
          "type": "string"
        }
      }
    },
    "LocalCopy": {
      "description": "LocalCopy defines how a remote file should be copied to and from the VM.",
      "type": "object",
      "properties": {
        "path": {
          "description": "Required. The path within the user's docker container where\nthis input should be localized to and from, relative to the specified\ndisk's mount point. For example: file.txt,",
          "type": "string"
        },
        "disk": {
          "description": "Required. The name of the disk where this parameter is\nlocated. Can be the name of one of the disks specified in the\nResources field, or \"boot\", which represents the Docker\ninstance's boot disk and has a mount point of `/`.",
          "type": "string"
        }
      },
      "id": "LocalCopy"
    },
    "DockerExecutor": {
      "id": "DockerExecutor",
      "description": "The Docker execuctor specification.",
      "type": "object",
      "properties": {
        "imageName": {
          "description": "Required. Image name from either Docker Hub or Google Container Registry.\nUsers that run pipelines must have READ access to the image.",
          "type": "string"
        },
        "cmd": {
          "description": "Required. The command or newline delimited script to run. The command\nstring will be executed within a bash shell.\n\nIf the command exits with a non-zero exit code, output parameter\nde-localization will be skipped and the pipeline operation's\n`error` field will be populated.\n\nMaximum command string length is 16384.",
          "type": "string"
        }
      }
    },
    "Disk": {
      "description": "A Google Compute Engine disk resource specification.",
      "type": "object",
      "properties": {
        "readOnly": {
          "type": "boolean",
          "description": "Specifies how a sourced-base persistent disk will be mounted. See\nhttps://cloud.google.com/compute/docs/disks/persistent-disks#use_multi_instances\nfor more details.\nCan only be set at create time."
        },
        "source": {
          "description": "The full or partial URL of the persistent disk to attach. See\nhttps://cloud.google.com/compute/docs/reference/latest/instances#resource\nand\nhttps://cloud.google.com/compute/docs/disks/persistent-disks#snapshots\nfor more details.",
          "type": "string"
        },
        "name": {
          "description": "Required. The name of the disk that can be used in the pipeline\nparameters. Must be 1 - 63 characters.\nThe name \"boot\" is reserved for system use.",
          "type": "string"
        },
        "type": {
          "enumDescriptions": [
            "Default disk type. Use one of the other options below.",
            "Specifies a Google Compute Engine persistent hard disk. See\nhttps://cloud.google.com/compute/docs/disks/#pdspecs for details.",
            "Specifies a Google Compute Engine persistent solid-state disk. See\nhttps://cloud.google.com/compute/docs/disks/#pdspecs for details.",
            "Specifies a Google Compute Engine local SSD.\nSee https://cloud.google.com/compute/docs/disks/local-ssd for details."
          ],
          "enum": [
            "TYPE_UNSPECIFIED",
            "PERSISTENT_HDD",
            "PERSISTENT_SSD",
            "LOCAL_SSD"
          ],
          "description": "Required. The type of the disk to create.",
          "type": "string"
        },
        "autoDelete": {
          "description": "Deprecated. Disks created by the Pipelines API will be deleted at the end\nof the pipeline run, regardless of what this field is set to.",
          "type": "boolean"
        },
        "sizeGb": {
          "type": "integer",
          "description": "The size of the disk. Defaults to 500 (GB).\nThis field is not applicable for local SSD.",
          "format": "int32"
        },
        "mountPoint": {
          "description": "Required at create time and cannot be overridden at run time.\nSpecifies the path in the docker container where files on\nthis disk should be located. For example, if `mountPoint`\nis `/mnt/disk`, and the parameter has `localPath`\n`inputs/file.txt`, the docker container can access the data at\n`/mnt/disk/inputs/file.txt`.",
          "type": "string"
        }
      },
      "id": "Disk"
    },
    "Empty": {
      "description": "A generic empty message that you can re-use to avoid defining duplicated\nempty messages in your APIs. A typical example is to use it as the request\nor the response type of an API method. For instance:\n\n    service Foo {\n      rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);\n    }\n\nThe JSON representation for `Empty` is empty JSON object `{}`.",
      "type": "object",
      "properties": {},
      "id": "Empty"
    }
  },
  "icons": {
    "x16": "http://www.google.com/images/icons/product/search-16.gif",
    "x32": "http://www.google.com/images/icons/product/search-32.gif"
  },
  "protocol": "rest",
  "version": "v1alpha2",
  "baseUrl": "https://genomics.googleapis.com/",
  "auth": {
    "oauth2": {
      "scopes": {
        "https://www.googleapis.com/auth/compute": {
          "description": "View and manage your Google Compute Engine resources"
        },
        "https://www.googleapis.com/auth/cloud-platform": {
          "description": "View and manage your data across Google Cloud Platform services"
        },
        "https://www.googleapis.com/auth/genomics": {
          "description": "View and manage Genomics data"
        }
      }
    }
  },
  "servicePath": "",
  "description": "Upload, process, query, and search Genomics data in the cloud.",
  "kind": "discovery#restDescription",
  "rootUrl": "https://genomics.googleapis.com/",
  "basePath": ""
}