// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
 */

/dts-v1/;

#include "bcm4709.dtsi"

/ {
	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
	model = "TP-LINK Archer C9 V1";

	chosen {
		bootargs = "console=ttyS0,115200 earlycon";
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x08000000>;
	};

	leds {
		compatible = "gpio-leds";

		lan {
			label = "bcm53xx:blue:lan";
			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
		};

		wps {
			label = "bcm53xx:blue:wps";
			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
		};

		2ghz {
			label = "bcm53xx:blue:2ghz";
			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
		};

		5ghz {
			label = "bcm53xx:blue:5ghz";
			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
		};

		usb3 {
			label = "bcm53xx:blue:usb3";
			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
			trigger-sources = <&ohci_port1>, <&ehci_port1>,
					  <&xhci_port1>;
			linux,default-trigger = "usbport";
		};

		usb2 {
			label = "bcm53xx:blue:usb2";
			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
			trigger-sources = <&ohci_port2>, <&ehci_port2>;
			linux,default-trigger = "usbport";
		};

		wan-blue {
			label = "bcm53xx:blue:wan";
			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
		};

		wan-amber {
			label = "bcm53xx:amber:wan";
			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
		};

		power {
			label = "bcm53xx:blue:power";
			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "default-on";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		wps {
			label = "WPS";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
		};

		restart {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
		};
	};
};

&usb2 {
	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};

&usb3 {
	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};

&spi_nor {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot@0 {
			label = "boot";
			reg = <0x000000 0x040000>;
			read-only;
		};

		os-image@100000 {
			label = "os-image";
			reg = <0x040000 0x200000>;
			compatible = "brcm,trx";
		};

		rootfs@240000 {
			label = "rootfs";
			reg = <0x240000 0xc00000>;
		};

		nvram@ff0000 {
			label = "nvram";
			reg = <0xff0000 0x010000>;
		};
	};
};

&usb3_phy {
	status = "okay";
};