Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use
of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
MIPS: DEC: Restore bootmem reservation for firmware working memory area
MIPS: dec: fix section mismatch
bcm963xx_tag.h: fix duplicated word
mips: ralink: enable zboot support
MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
MIPS: cpu-probe: introduce exclusive R3k CPU probe
MIPS: cpu-probe: move fpu probing/handling into its own file
MIPS: replace add_memory_region with memblock
MIPS: Loongson64: Clean up numa.c
MIPS: Loongson64: Select SMP in Kconfig to avoid build error
mips: octeon: Add Ubiquiti E200 and E220 boards
MIPS: SGI-IP28: disable use of ll/sc in kernel
MIPS: tx49xx: move tx4939_add_memory_regions into only user
MIPS: pgtable: Remove used PAGE_USERIO define
MIPS: alchemy: Share prom_init implementation
MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
MIPS: process: include exec.h header in process.c
MIPS: process: Add prototype for function arch_dup_task_struct
MIPS: idle: Add prototype for function check_wait
...
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index 83c86cb..dc21b46 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -47,4 +47,9 @@
items:
- const: yna,cu1830-neo
- const: ingenic,x1830
+
+ - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane
+ items:
+ - const: yna,cu2000-neo
+ - const: ingenic,x2000e
...
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c31900..ada7ea9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8675,8 +8675,9 @@
M: Paul Cercueil <paul@crapouillou.net>
S: Maintained
F: arch/mips/boot/dts/ingenic/
-F: arch/mips/include/asm/mach-jz4740/
-F: arch/mips/jz4740/
+F: arch/mips/generic/board-ingenic.c
+F: arch/mips/include/asm/mach-ingenic/
+F: arch/mips/ingenic/Kconfig
F: drivers/clk/ingenic/
F: drivers/dma/dma-jz4780.c
F: drivers/gpu/drm/ingenic/
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a13c4cf..5483e38 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -13,7 +13,6 @@
platform-$(CONFIG_MACH_DECSTATION) += dec/
platform-$(CONFIG_MIPS_GENERIC) += generic/
platform-$(CONFIG_MACH_JAZZ) += jazz/
-platform-$(CONFIG_MACH_INGENIC) += jz4740/
platform-$(CONFIG_LANTIQ) += lantiq/
platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/
platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
@@ -22,7 +21,6 @@
platform-$(CONFIG_NLM_COMMON) += netlogic/
platform-$(CONFIG_PIC32MZDA) += pic32/
platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
-platform-$(CONFIG_SOC_PNX833X) += pnx833x/
platform-$(CONFIG_RALINK) += ralink/
platform-$(CONFIG_MIKROTIK_RB532) += rb532/
platform-$(CONFIG_SGI_IP22) += sgi-ip22/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c695d10..bc04cf0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -94,14 +94,34 @@
config MIPS_FIXUP_BIGPHYS_ADDR
bool
+config MIPS_GENERIC
+ bool
+
+config MACH_INGENIC
+ bool
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_ZBOOT
+ select DMA_NONCOHERENT
+ select IRQ_MIPS_CPU
+ select PINCTRL
+ select GPIOLIB
+ select COMMON_CLK
+ select GENERIC_IRQ_CHIP
+ select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
+ select USE_OF
+ select CPU_SUPPORTS_CPUFREQ
+ select MIPS_EXTERNAL_TIMER
+
menu "Machine selection"
choice
prompt "System type"
- default MIPS_GENERIC
+ default MIPS_GENERIC_KERNEL
-config MIPS_GENERIC
+config MIPS_GENERIC_KERNEL
bool "Generic board-agnostic MIPS kernel"
+ select MIPS_GENERIC
select BOOT_RAW
select BUILTIN_DTB
select CEVT_R4K
@@ -138,6 +158,7 @@
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
select SYS_SUPPORTS_SMARTMIPS
+ select SYS_SUPPORTS_ZBOOT
select UHI_BOOT
select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
@@ -390,20 +411,11 @@
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
Olivetti M700-10 workstations.
-config MACH_INGENIC
+config MACH_INGENIC_SOC
bool "Ingenic SoC based machines"
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
+ select MIPS_GENERIC
+ select MACH_INGENIC
select SYS_SUPPORTS_ZBOOT_UART16550
- select CPU_SUPPORTS_HUGEPAGES
- select DMA_NONCOHERENT
- select IRQ_MIPS_CPU
- select PINCTRL
- select GPIOLIB
- select COMMON_CLK
- select GENERIC_IRQ_CHIP
- select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
- select USE_OF
config LANTIQ
bool "Lantiq based platforms"
@@ -476,6 +488,7 @@
select SYS_SUPPORTS_ZBOOT
select ZONE_DMA32
select NUMA
+ select SMP
select COMMON_CLK
select USE_OF
select BUILTIN_DTB
@@ -569,6 +582,7 @@
select SYS_SUPPORTS_VPE_LOADER
select SYS_SUPPORTS_ZBOOT
select USE_OF
+ select WAR_ICACHE_REFILLS
select ZONE_DMA32 if 64BIT
help
This enables support for the MIPS Technologies Malta evaluation
@@ -590,19 +604,6 @@
select SYS_SUPPORTS_MIPS16
select GPIOLIB
-config NXP_STB220
- bool "NXP STB220 board"
- select SOC_PNX833X
- help
- Support for NXP Semiconductors STB220 Development Board.
-
-config NXP_STB225
- bool "NXP 225 board"
- select SOC_PNX833X
- select SOC_PNX8335
- help
- Support for NXP Semiconductors STB225 Development Board.
-
config RALINK
bool "Ralink based machines"
select CEVT_R4K
@@ -616,6 +617,7 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_ZBOOT
select SYS_HAS_EARLY_PRINTK
select CLKDEV_LOOKUP
select ARCH_HAS_RESET_CONTROLLER
@@ -652,6 +654,9 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select WAR_R4600_V1_INDEX_ICACHEOP
+ select WAR_R4600_V1_HIT_CACHEOP
+ select WAR_R4600_V2_HIT_CACHEOP
select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
@@ -679,6 +684,7 @@
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select WAR_R10000_LLSC
select MIPS_L1_CACHE_SHIFT_7
select NUMA
help
@@ -714,6 +720,7 @@
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select WAR_R10000_LLSC
select MIPS_L1_CACHE_SHIFT_7
help
This is the SGI Indigo2 with R10000 processor. To compile a Linux
@@ -740,6 +747,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_SMP
+ select WAR_R10000_LLSC
select MIPS_L1_CACHE_SHIFT_7
select ARC_MEMORY
help
@@ -767,6 +775,7 @@
select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select WAR_ICACHE_REFILLS
help
If you want this kernel to run on SGI O2 workstation, say Y here.
@@ -890,6 +899,7 @@
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select WAR_R4600_V2_HIT_CACHEOP
help
The SNI RM200/300/400 are MIPS-based machines manufactured by
Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -901,6 +911,7 @@
config MACH_TX49XX
bool "Toshiba TX49 series based machines"
+ select WAR_TX49XX_ICACHE_INDEX_INV
config MIKROTIK_RB532
bool "Mikrotik RB532 boards"
@@ -1026,8 +1037,8 @@
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig"
source "arch/mips/generic/Kconfig"
+source "arch/mips/ingenic/Kconfig"
source "arch/mips/jazz/Kconfig"
-source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
source "arch/mips/pic32/Kconfig"
source "arch/mips/pistachio/Kconfig"
@@ -1267,23 +1278,6 @@
config NO_EXCEPT_FILL
bool
-config SOC_PNX833X
- bool
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_MIPS_CPU
- select DMA_NONCOHERENT
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select CPU_MIPSR2_IRQ_VI
-
-config SOC_PNX8335
- bool
- select SOC_PNX833X
-
config MIPS_SPRAM
bool
@@ -1620,7 +1614,6 @@
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
- select CPU_SUPPORTS_UNCACHED_ACCELERATED
select CPU_SUPPORTS_CPUFREQ
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
@@ -1891,6 +1884,7 @@
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
+ select HAVE_KERNEL_ZSTD
config SYS_SUPPORTS_ZBOOT_UART16550
bool
@@ -2272,7 +2266,7 @@
default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
- range 11 64
+ range 0 64
default "11"
help
The kernel memory allocator divides physically contiguous memory
@@ -2638,6 +2632,76 @@
config MIPS_CRC_SUPPORT
bool
+# R4600 erratum. Due to the lack of errata information the exact
+# technical details aren't known. I've experimentally found that disabling
+# interrupts during indexed I-cache flushes seems to be sufficient to deal
+# with the issue.
+config WAR_R4600_V1_INDEX_ICACHEOP
+ bool
+
+# Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
+#
+# 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+# Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+# executed if there is no other dcache activity. If the dcache is
+# accessed for another instruction immeidately preceding when these
+# cache instructions are executing, it is possible that the dcache
+# tag match outputs used by these cache instructions will be
+# incorrect. These cache instructions should be preceded by at least
+# four instructions that are not any kind of load or store
+# instruction.
+#
+# This is not allowed: lw
+# nop
+# nop
+# nop
+# cache Hit_Writeback_Invalidate_D
+#
+# This is allowed: lw
+# nop
+# nop
+# nop
+# nop
+# cache Hit_Writeback_Invalidate_D
+config WAR_R4600_V1_HIT_CACHEOP
+ bool
+
+# Writeback and invalidate the primary cache dcache before DMA.
+#
+# R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+# Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+# operate correctly if the internal data cache refill buffer is empty. These
+# CACHE instructions should be separated from any potential data cache miss
+# by a load instruction to an uncached address to empty the response buffer."
+# (Revision 2.0 device errata from IDT available on https://www.idt.com/
+# in .pdf format.)
+config WAR_R4600_V2_HIT_CACHEOP
+ bool
+
+# From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+# the line which this instruction itself exists, the following
+# operation is not guaranteed."
+#
+# Workaround: do two phase flushing for Index_Invalidate_I
+config WAR_TX49XX_ICACHE_INDEX_INV
+ bool
+
+# The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+# opposes it being called that) where invalid instructions in the same
+# I-cache line worth of instructions being fetched may case spurious
+# exceptions.
+config WAR_ICACHE_REFILLS
+ bool
+
+# On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
+# may cause ll / sc and lld / scd sequences to execute non-atomically.
+config WAR_R10000_LLSC
+ bool
+
+# 34K core erratum: "Problems Executing the TLBR Instruction"
+config WAR_MIPS34K_MISSED_ITLB
+ bool
+
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 83b288b..6973412 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -1,12 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-# au1000-style gpio and interrupt controllers
-config ALCHEMY_GPIOINT_AU1000
- bool
-
-# au1300-style GPIO/INT controller
-config ALCHEMY_GPIOINT_AU1300
- bool
-
choice
prompt "Machine type"
depends on MIPS_ALCHEMY
@@ -15,7 +7,6 @@
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select HAVE_PCI
- select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
@@ -33,13 +24,11 @@
config MIPS_XXS1500
bool "MyCable XXS1500 board"
- select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_GPR
bool "Trapeze ITS GPR board"
- select ALCHEMY_GPIOINT_AU1000
select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index 6c47318..f587c40 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -31,23 +31,6 @@
return "GPR";
}
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
- memsize = 0x04000000;
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
void prom_putchar(char c)
{
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 2309353..68ea575 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -30,23 +30,6 @@
return "MTX-1";
}
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
- memsize = 0x04000000;
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
void prom_putchar(char c)
{
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index c67dfe1..b184baa 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -25,24 +25,6 @@
return "XXS1500";
}
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
- memsize = 0x04000000;
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
void prom_putchar(char c)
{
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index af312b5e..d910c0a 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -34,6 +34,9 @@
*/
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/sizes.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
@@ -76,6 +79,24 @@
return NULL;
}
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+ memsize = SZ_64M; /* minimum memsize is 64MB RAM */
+
+ memblock_add(0, memsize);
+}
+
static inline unsigned char str2hexnum(unsigned char c)
{
if (c >= '0' && c <= '9')
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 8ac1f56..cd72eaa 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -731,6 +731,7 @@
/**********************************************************************/
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX)
static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable)
{
if (enable)
@@ -762,6 +763,12 @@
return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
}
+#else
+static int db1300_wm97xx_probe(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif
static struct platform_driver db1300_wm97xx_driver = {
.driver.name = "wm97xx-touch",
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 8d4b65c..754bdd2 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -20,23 +20,6 @@
#include <prom.h>
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
- memsize = 64 << 20; /* all devboards have at least 64MB RAM */
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
void prom_putchar(char c)
{
if (alchemy_get_cputype() == ALCHEMY_CPU_AU1300)
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
index ad6efb3..787716c 100644
--- a/arch/mips/ar7/memory.c
+++ b/arch/mips/ar7/memory.c
@@ -47,7 +47,7 @@
unsigned long pages;
pages = memsize() >> PAGE_SHIFT;
- add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM);
+ memblock_add(PHYS_OFFSET, pages << PAGE_SHIFT);
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
index e7b53e3..9dbed7b 100644
--- a/arch/mips/ath25/ar2315.c
+++ b/arch/mips/ath25/ar2315.c
@@ -19,6 +19,7 @@
#include <linux/bitops.h>
#include <linux/irqdomain.h>
#include <linux/interrupt.h>
+#include <linux/memblock.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <asm/bootinfo.h>
@@ -266,7 +267,7 @@
memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
memsize <<= 3;
- add_memory_region(0, memsize, BOOT_MEM_RAM);
+ memblock_add(0, memsize);
iounmap(sdram_base);
ar2315_rst_base = ioremap(AR2315_RST_BASE, AR2315_RST_SIZE);
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
index 42bf2af..23c879f 100644
--- a/arch/mips/ath25/ar5312.c
+++ b/arch/mips/ath25/ar5312.c
@@ -19,6 +19,7 @@
#include <linux/bitops.h>
#include <linux/irqdomain.h>
#include <linux/interrupt.h>
+#include <linux/memblock.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/reboot.h>
@@ -363,7 +364,7 @@
memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) +
(bank1_ac ? (1 << (bank1_ac + 1)) : 0);
memsize <<= 20;
- add_memory_region(0, memsize, BOOT_MEM_RAM);
+ memblock_add(0, memsize);
iounmap(sdram_base);
ar5312_rst_base = ioremap(AR5312_RST_BASE, AR5312_RST_SIZE);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 135a540..3e2a816 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/ssb/ssb_regs.h>
@@ -97,7 +98,7 @@
*/
if (c->cputype == CPU_74K && (mem == (128 << 20)))
mem -= 0x1000;
- add_memory_region(0, mem, BOOT_MEM_RAM);
+ memblock_add(0, mem);
}
/*
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 01427bd..94bf839 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -141,7 +141,7 @@
/*
* Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed
- * to detect memory and record it with add_memory_region.
+ * to detect memory and record it with memblock_add.
* Any extra initializaion performed here must not use kmalloc or bootmem.
*/
void __init plat_mem_setup(void)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 230bf27..01aff80 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
*/
@@ -32,7 +29,6 @@
#include <uapi/linux/bcm933xx_hcs.h>
-
#define HCS_OFFSET_128K 0x20000
static struct board_info board;
@@ -42,30 +38,28 @@
*/
#ifdef CONFIG_BCM63XX_CPU_3368
static struct board_info __initdata board_cvg834g = {
- .name = "CVG834G_E15R3921",
- .expected_cpu_id = 0x3368,
+ .name = "CVG834G_E15R3921",
+ .expected_cpu_id = 0x3368,
- .has_uart0 = 1,
- .has_uart1 = 1,
+ .ephy_reset_gpio = 36,
+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_uart1 = 1,
- .has_enet0 = 1,
- .has_pci = 1,
-
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
.leds = {
{
- .name = "CVG834G:green:power",
- .gpio = 37,
+ .name = "CVG834G:green:power",
+ .gpio = 37,
.default_trigger= "default-on",
},
},
-
- .ephy_reset_gpio = 36,
- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
};
#endif /* CONFIG_BCM63XX_CPU_3368 */
@@ -74,44 +68,44 @@
*/
#ifdef CONFIG_BCM63XX_CPU_6328
static struct board_info __initdata board_96328avng = {
- .name = "96328avng",
- .expected_cpu_id = 0x6328,
+ .name = "96328avng",
+ .expected_cpu_id = 0x6328,
- .has_uart0 = 1,
- .has_pci = 1,
- .has_usbd = 0,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_usbd = 0,
.usbd = {
- .use_fullspeed = 0,
- .port_no = 0,
+ .use_fullspeed = 0,
+ .port_no = 0,
},
.leds = {
{
- .name = "96328avng::ppp-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "96328avng::ppp-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "96328avng::power",
- .gpio = 4,
- .active_low = 1,
+ .name = "96328avng::power",
+ .gpio = 4,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "96328avng::power-fail",
- .gpio = 8,
- .active_low = 1,
+ .name = "96328avng::power-fail",
+ .gpio = 8,
+ .active_low = 1,
},
{
- .name = "96328avng::wps",
- .gpio = 9,
- .active_low = 1,
+ .name = "96328avng::wps",
+ .gpio = 9,
+ .active_low = 1,
},
{
- .name = "96328avng::ppp",
- .gpio = 11,
- .active_low = 1,
+ .name = "96328avng::ppp",
+ .gpio = 11,
+ .active_low = 1,
},
},
};
@@ -122,85 +116,86 @@
*/
#ifdef CONFIG_BCM63XX_CPU_6338
static struct board_info __initdata board_96338gw = {
- .name = "96338GW",
- .expected_cpu_id = 0x6338,
+ .name = "96338GW",
+ .expected_cpu_id = 0x6338,
- .has_uart0 = 1,
- .has_enet0 = 1,
+ .has_ohci0 = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
.enet0 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
-
.leds = {
{
- .name = "adsl",
- .gpio = 3,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ses",
- .gpio = 5,
- .active_low = 1,
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
}
},
};
static struct board_info __initdata board_96338w = {
- .name = "96338W",
- .expected_cpu_id = 0x6338,
+ .name = "96338W",
+ .expected_cpu_id = 0x6338,
- .has_uart0 = 1,
- .has_enet0 = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
.enet0 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
.leds = {
{
- .name = "adsl",
- .gpio = 3,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ses",
- .gpio = 5,
- .active_low = 1,
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
@@ -211,10 +206,10 @@
*/
#ifdef CONFIG_BCM63XX_CPU_6345
static struct board_info __initdata board_96345gw2 = {
- .name = "96345GW2",
- .expected_cpu_id = 0x6345,
+ .name = "96345GW2",
+ .expected_cpu_id = 0x6345,
- .has_uart0 = 1,
+ .has_uart0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6345 */
@@ -223,286 +218,282 @@
*/
#ifdef CONFIG_BCM63XX_CPU_6348
static struct board_info __initdata board_96348r = {
- .name = "96348R",
- .expected_cpu_id = 0x6348,
+ .name = "96348R",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_pci = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw_10 = {
- .name = "96348GW-10",
- .expected_cpu_id = 0x6348,
+ .name = "96348GW-10",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw_11 = {
- .name = "96348GW-11",
- .expected_cpu_id = 0x6348,
-
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
-
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
-
+ .name = "96348GW-11",
+ .expected_cpu_id = 0x6348,
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
+ .name = "96348GW",
+ .expected_cpu_id = 0x6348,
.has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
};
static struct board_info __initdata board_rta1025w_16 = {
- .name = "RTA1025W_16",
- .expected_cpu_id = 0x6348,
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_pci = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
};
static struct board_info __initdata board_DV201AMR = {
- .name = "DV201AMR",
- .expected_cpu_id = 0x6348,
+ .name = "DV201AMR",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_pci = 1,
- .has_ohci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
};
static struct board_info __initdata board_96348gw_a = {
- .name = "96348GW-A",
- .expected_cpu_id = 0x6348,
-
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
+ .name = "96348GW-A",
+ .expected_cpu_id = 0x6348,
.has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
};
#endif /* CONFIG_BCM63XX_CPU_6348 */
@@ -511,146 +502,142 @@
*/
#ifdef CONFIG_BCM63XX_CPU_6358
static struct board_info __initdata board_96358vw = {
- .name = "96358VW",
- .expected_cpu_id = 0x6358,
+ .name = "96358VW",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
-
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
-
+ .has_ehci0 = 1,
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
.leds = {
{
- .name = "adsl-fail",
- .gpio = 15,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 15,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 22,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 22,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 23,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 23,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 4,
+ .name = "power",
+ .gpio = 4,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 5,
+ .name = "stop",
+ .gpio = 5,
},
},
};
static struct board_info __initdata board_96358vw2 = {
- .name = "96358VW2",
- .expected_cpu_id = 0x6358,
+ .name = "96358VW2",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
-
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
-
-
+ .has_ehci0 = 1,
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
.leds = {
{
- .name = "adsl",
- .gpio = 22,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 22,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 23,
+ .name = "ppp-fail",
+ .gpio = 23,
},
{
- .name = "power",
- .gpio = 5,
- .active_low = 1,
+ .name = "power",
+ .gpio = 5,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 4,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 4,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_AGPFS0 = {
- .name = "AGPF-S0",
- .expected_cpu_id = 0x6358,
+ .name = "AGPF-S0",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
-
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
-
- .has_ohci0 = 1,
.has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
};
static struct board_info __initdata board_DWVS0 = {
- .name = "DWV-S0",
- .expected_cpu_id = 0x6358,
+ .name = "DWV-S0",
+ .expected_cpu_id = 0x6358,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6358 */
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index e28ee9a..d811e3e 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -146,7 +146,7 @@
void __init plat_mem_setup(void)
{
- add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
+ memblock_add(0, bcm63xx_get_memory_size());
_machine_halt = bcm63xx_machine_halt;
_machine_restart = __bcm63xx_machine_reboot;
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 6e56cae..d665118 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -22,7 +22,12 @@
KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
-KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
+# Disable lq/sq in zboot
+ifdef CONFIG_CPU_LOONGSON64
+KBUILD_CFLAGS := $(filter-out -march=loongson3a, $(KBUILD_CFLAGS)) -march=mips64r2
+endif
+
+KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ -D__DISABLE_EXPORTS \
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
@@ -70,6 +75,7 @@
tool_$(CONFIG_KERNEL_LZMA) = lzma
tool_$(CONFIG_KERNEL_LZO) = lzo
tool_$(CONFIG_KERNEL_XZ) = xzkern
+tool_$(CONFIG_KERNEL_ZSTD) = zstd22
targets += vmlinux.bin.z
$(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 88f5d63..c61c641 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -72,6 +72,10 @@
#include "../../../../lib/decompress_unxz.c"
#endif
+#ifdef CONFIG_KERNEL_ZSTD
+#include "../../../../lib/decompress_unzstd.c"
+#endif
+
const unsigned long __stack_chk_guard = 0x000a0dff;
void __stack_chk_fail(void)
diff --git a/arch/mips/boot/compressed/string.c b/arch/mips/boot/compressed/string.c
index 43beecc..0b593b70 100644
--- a/arch/mips/boot/compressed/string.c
+++ b/arch/mips/boot/compressed/string.c
@@ -5,6 +5,7 @@
* Very small subset of simple string routines
*/
+#include <linux/compiler_attributes.h>
#include <linux/types.h>
void *memcpy(void *dest, const void *src, size_t n)
@@ -27,3 +28,19 @@
ss[i] = c;
return s;
}
+
+void * __weak memmove(void *dest, const void *src, size_t n)
+{
+ unsigned int i;
+ const char *s = src;
+ char *d = dest;
+
+ if ((uintptr_t)dest < (uintptr_t)src) {
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ } else {
+ for (i = n; i > 0; i--)
+ d[i - 1] = s[i - 1];
+ }
+ return dest;
+}
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index a8fca56..a1f0b71 100644
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -7,6 +7,20 @@
#size-cells = <1>;
compatible = "ingenic,jz4725b";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 1520585..eee5236 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -7,6 +7,20 @@
#size-cells = <1>;
compatible = "ingenic,jz4740";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4740_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index fa11ac9..018721a 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-
#include <dt-bindings/clock/jz4770-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
@@ -8,6 +7,20 @@
#size-cells = <1>;
compatible = "ingenic,jz4770";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4770_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b7f409a..dfb5a7e 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -8,6 +8,29 @@
#size-cells = <1>;
compatible = "ingenic,jz4780";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4780_CLK_CPU>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <1>;
+
+ clocks = <&cgu JZ4780_CLK_CORE1>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index bf29826..ba02189 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -109,74 +109,73 @@
debounce-delay-ms = <10>;
wakeup-source;
- row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0
- &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>;
- col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0
- &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>;
+ row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+ <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+ col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+ <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
gpio-activelow;
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_F1) /* S2 */
- MATRIX_KEY(0, 1, KEY_F2) /* S3 */
- MATRIX_KEY(0, 2, KEY_F3) /* S4 */
- MATRIX_KEY(0, 3, KEY_F4) /* S5 */
- MATRIX_KEY(0, 4, KEY_F5) /* S6 */
- MATRIX_KEY(0, 5, KEY_F6) /* S7 */
- MATRIX_KEY(0, 6, KEY_F7) /* S8 */
+ linux,keymap =
+ <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */
+ <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */
+ <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */
+ <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */
+ <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */
+ <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */
+ <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */
- MATRIX_KEY(1, 0, KEY_Q) /* S10 */
- MATRIX_KEY(1, 1, KEY_W) /* S11 */
- MATRIX_KEY(1, 2, KEY_E) /* S12 */
- MATRIX_KEY(1, 3, KEY_R) /* S13 */
- MATRIX_KEY(1, 4, KEY_T) /* S14 */
- MATRIX_KEY(1, 5, KEY_Y) /* S15 */
- MATRIX_KEY(1, 6, KEY_U) /* S16 */
- MATRIX_KEY(1, 7, KEY_I) /* S17 */
- MATRIX_KEY(2, 0, KEY_A) /* S18 */
- MATRIX_KEY(2, 1, KEY_S) /* S19 */
- MATRIX_KEY(2, 2, KEY_D) /* S20 */
- MATRIX_KEY(2, 3, KEY_F) /* S21 */
- MATRIX_KEY(2, 4, KEY_G) /* S22 */
- MATRIX_KEY(2, 5, KEY_H) /* S23 */
- MATRIX_KEY(2, 6, KEY_J) /* S24 */
- MATRIX_KEY(2, 7, KEY_K) /* S25 */
- MATRIX_KEY(3, 0, KEY_ESC) /* S26 */
- MATRIX_KEY(3, 1, KEY_Z) /* S27 */
- MATRIX_KEY(3, 2, KEY_X) /* S28 */
- MATRIX_KEY(3, 3, KEY_C) /* S29 */
- MATRIX_KEY(3, 4, KEY_V) /* S30 */
- MATRIX_KEY(3, 5, KEY_B) /* S31 */
- MATRIX_KEY(3, 6, KEY_N) /* S32 */
- MATRIX_KEY(3, 7, KEY_M) /* S33 */
- MATRIX_KEY(4, 0, KEY_TAB) /* S34 */
- MATRIX_KEY(4, 1, KEY_CAPSLOCK) /* S35 */
- MATRIX_KEY(4, 2, KEY_BACKSLASH) /* S36 */
- MATRIX_KEY(4, 3, KEY_APOSTROPHE) /* S37 */
- MATRIX_KEY(4, 4, KEY_COMMA) /* S38 */
- MATRIX_KEY(4, 5, KEY_DOT) /* S39 */
- MATRIX_KEY(4, 6, KEY_SLASH) /* S40 */
- MATRIX_KEY(4, 7, KEY_UP) /* S41 */
- MATRIX_KEY(5, 0, KEY_O) /* S42 */
- MATRIX_KEY(5, 1, KEY_L) /* S43 */
- MATRIX_KEY(5, 2, KEY_EQUAL) /* S44 */
- MATRIX_KEY(5, 3, KEY_QI_UPRED) /* S45 */
- MATRIX_KEY(5, 4, KEY_SPACE) /* S46 */
- MATRIX_KEY(5, 5, KEY_QI_QI) /* S47 */
- MATRIX_KEY(5, 6, KEY_RIGHTCTRL) /* S48 */
- MATRIX_KEY(5, 7, KEY_LEFT) /* S49 */
- MATRIX_KEY(6, 0, KEY_F8) /* S50 */
- MATRIX_KEY(6, 1, KEY_P) /* S51 */
- MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */
- MATRIX_KEY(6, 3, KEY_ENTER) /* S53 */
- MATRIX_KEY(6, 4, KEY_QI_VOLUP) /* S54 */
- MATRIX_KEY(6, 5, KEY_QI_VOLDOWN) /* S55 */
- MATRIX_KEY(6, 6, KEY_DOWN) /* S56 */
- MATRIX_KEY(6, 7, KEY_RIGHT) /* S57 */
+ <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */
+ <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */
+ <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */
+ <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */
+ <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */
+ <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */
+ <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */
+ <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */
+ <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */
+ <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */
+ <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */
+ <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */
+ <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */
+ <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */
+ <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */
+ <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */
+ <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */
+ <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */
+ <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */
+ <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */
+ <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */
+ <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */
+ <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */
+ <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */
+ <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */
+ <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */
+ <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */
+ <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */
+ <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */
+ <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */
+ <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */
+ <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */
+ <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */
+ <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */
+ <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */
+ <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */
+ <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */
+ <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */
+ <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */
+ <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */
+ <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */
+ <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */
+ <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+ <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */
+ <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */
+ <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */
+ <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */
+ <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */
- MATRIX_KEY(7, 0, KEY_LEFTSHIFT) /* S58 */
- MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */
- MATRIX_KEY(7, 2, KEY_QI_FN) /* S60 */
- >;
+ <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */
+ <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+ <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */
};
spi {
@@ -261,12 +260,12 @@
#address-cells = <1>;
#size-cells = <0>;
- ingenic,bch-controller = <&ecc>;
+ ecc-engine = <&ecc>;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;
- rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
nand@1 {
reg = <1>;
@@ -324,7 +323,7 @@
pins_nemc: nemc {
function = "nand";
- groups = "nand-cs1";
+ groups = "nand-fre-fwe", "nand-cs1";
};
pins_uart0: uart0 {
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 9de9e7c..1f1f896 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -8,6 +8,20 @@
#size-cells = <1>;
compatible = "ingenic,x1000", "ingenic,x1000e";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu X1000_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
index eb121448..b05dac3 100644
--- a/arch/mips/boot/dts/ingenic/x1830.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -8,6 +8,20 @@
#size-cells = <1>;
compatible = "ingenic,x1830";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu2.0-mxu2.0";
+ reg = <0>;
+
+ clocks = <&cgu X1830_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index e574a06..f99a7a1 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -19,6 +19,45 @@
#interrupt-cells = <2>;
};
+ ls7a_uart0: serial@10080000 {
+ compatible = "ns16550a";
+ reg = <0 0x10080000 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart1: serial@10080100 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080100 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart2: serial@10080200 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080200 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart3: serial@10080300 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080300 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
pci@1a000000 {
compatible = "loongson,ls7a-pci";
device_type = "pci";
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 4f34d92..561389d 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/memblock.h>
#include <linux/serial.h>
#include <linux/smp.h>
#include <linux/types.h>
@@ -930,7 +931,7 @@
{
if (addr > *mem && addr < *mem + *size) {
u64 inc = addr - *mem;
- add_memory_region(*mem, inc, BOOT_MEM_RAM);
+ memblock_add(*mem, inc);
*mem += inc;
*size -= inc;
}
@@ -992,19 +993,18 @@
/* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
#ifdef CONFIG_CRASH_DUMP
- add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
+ memblock_add(reserve_low_mem, max_memory);
total += max_memory;
#else
#ifdef CONFIG_KEXEC
if (crashk_size > 0) {
- add_memory_region(crashk_base, crashk_size, BOOT_MEM_RAM);
+ memblock_add(crashk_base, crashk_size);
crashk_end = crashk_base + crashk_size;
}
#endif
/*
- * When allocating memory, we want incrementing addresses from
- * bootmem_alloc so the code in add_memory_region can merge
- * regions next to each other.
+ * When allocating memory, we want incrementing addresses,
+ * which is handled by memblock
*/
cvmx_bootmem_lock();
while (total < max_memory) {
@@ -1039,13 +1039,9 @@
*/
if (memory < crashk_base && end > crashk_end) {
/* region is fully in */
- add_memory_region(memory,
- crashk_base - memory,
- BOOT_MEM_RAM);
+ memblock_add(memory, crashk_base - memory);
total += crashk_base - memory;
- add_memory_region(crashk_end,
- end - crashk_end,
- BOOT_MEM_RAM);
+ memblock_add(crashk_end, end - crashk_end);
total += end - crashk_end;
continue;
}
@@ -1073,7 +1069,7 @@
*/
mem_alloc_size -= end - crashk_base;
#endif
- add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
+ memblock_add(memory, mem_alloc_size);
total += mem_alloc_size;
/* Recovering mem_alloc_size */
mem_alloc_size = 4 << 20;
@@ -1088,7 +1084,7 @@
/* Adjust for physical offset. */
kernel_start &= ~0xffffffff80000000ULL;
- add_memory_region(kernel_start, kernel_size, BOOT_MEM_RAM);
+ memblock_add(kernel_start, kernel_size);
#endif /* CONFIG_CRASH_DUMP */
#ifdef CONFIG_CAVIUM_RESERVE32
@@ -1126,7 +1122,7 @@
void __init prom_free_prom_memory(void)
{
- if (CAVIUM_OCTEON_DCACHE_PREFETCH_WAR) {
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) {
/* Check for presence of Core-14449 fix. */
u32 insn;
u32 *foo;
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index c136a18..46581e6 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/memblock.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
@@ -112,7 +113,7 @@
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
- add_memory_region(0x0, memsz, BOOT_MEM_RAM);
+ memblock_add(0, memsz);
setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0);
}
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 0a46199..052c5ad 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -22,7 +22,7 @@
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
CONFIG_JZ4780_CI20=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
@@ -42,7 +42,7 @@
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index e924c81..55d0690 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -1,5 +1,3 @@
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_KERNEL_GZIP=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
@@ -9,7 +7,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
-CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
@@ -22,7 +19,7 @@
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
CONFIG_X1000_CU1000_NEO=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
@@ -31,7 +28,6 @@
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
CONFIG_CMA=y
-CONFIG_CMA_AREAS=7
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -40,19 +36,16 @@
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-# CONFIG_FW_LOADER is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
CONFIG_SMSC_PHY=y
CONFIG_BRCMFMAC=y
-# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=2
-CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
@@ -66,8 +59,6 @@
CONFIG_SENSORS_ADS7828=y
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
@@ -82,8 +73,6 @@
CONFIG_DMADEVICES=y
CONFIG_DMA_JZ4780=y
# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
@@ -108,8 +97,8 @@
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
CONFIG_DEBUG_INFO=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index cbfb629..e706485 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -1,5 +1,3 @@
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_KERNEL_GZIP=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
@@ -9,7 +7,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
-CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
@@ -22,7 +19,7 @@
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
CONFIG_X1830_CU1830_NEO=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
@@ -31,7 +28,6 @@
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
CONFIG_CMA=y
-CONFIG_CMA_AREAS=7
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -40,7 +36,6 @@
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-# CONFIG_FW_LOADER is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -49,13 +44,11 @@
CONFIG_STMMAC_ETH=y
CONFIG_ICPLUS_PHY=y
CONFIG_BRCMFMAC=y
-# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=2
-CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
@@ -69,8 +62,6 @@
CONFIG_SENSORS_ADS7828=y
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
@@ -85,8 +76,6 @@
CONFIG_DMADEVICES=y
CONFIG_DMA_JZ4780=y
# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
@@ -111,8 +100,8 @@
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
CONFIG_DEBUG_INFO=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
index 4994749..7e28a4f 100644
--- a/arch/mips/configs/gcw0_defconfig
+++ b/arch/mips/configs/gcw0_defconfig
@@ -4,7 +4,7 @@
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
CONFIG_JZ4770_GCW0=y
CONFIG_HIGHMEM=y
# CONFIG_SECCOMP is not set
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index a65b08d..38a817e 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -30,7 +30,6 @@
CONFIG_PERF_EVENTS=y
CONFIG_MACH_LOONGSON64=y
CONFIG_CPU_HAS_MSA=y
-CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HZ_256=y
CONFIG_KEXEC=y
@@ -403,7 +402,6 @@
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_PRINTK_TIME=y
-CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig
deleted file mode 100644
index d06db6b..0000000
--- a/arch/mips/configs/pnx8335_stb225_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_NXP_STB225=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_HZ_128=y
-# CONFIG_SECCOMP is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_INET_AH=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PNX8XXX=y
-CONFIG_SERIAL_PNX8XXX_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_EXT2_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
index 81bfbee..b4448d0 100644
--- a/arch/mips/configs/qi_lb60_defconfig
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -7,7 +7,8 @@
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
+CONFIG_JZ4740_QI_LB60=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
@@ -72,9 +73,7 @@
CONFIG_DRM_FBDEV_OVERALLOC=200
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_INGENIC=y
-# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
@@ -170,9 +169,9 @@
CONFIG_DEBUG_INFO=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
+CONFIG_KGDB=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_PANIC_ON_OOPS=y
# CONFIG_FTRACE is not set
-CONFIG_KGDB=y
diff --git a/arch/mips/configs/rs90_defconfig b/arch/mips/configs/rs90_defconfig
index de67520..dfbb9fed 100644
--- a/arch/mips/configs/rs90_defconfig
+++ b/arch/mips/configs/rs90_defconfig
@@ -19,7 +19,7 @@
# CONFIG_PERF_EVENTS is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
-CONFIG_MACH_INGENIC=y
+CONFIG_MACH_INGENIC_SOC=y
CONFIG_JZ4740_RS90=y
CONFIG_PAGE_SIZE_16KB=y
CONFIG_HZ_100=y
@@ -80,8 +80,8 @@
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=2
-# CONFIG_DEVMEM is not set
# CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_POWER_SUPPLY=y
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 5073d2e..44490c3 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -12,7 +12,6 @@
#include <linux/types.h>
#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
#include <asm/dec/machtype.h>
#include <asm/dec/prom.h>
#include <asm/page.h>
@@ -28,7 +27,7 @@
#define CHUNK_SIZE 0x400000
-static inline void pmax_setup_memory_region(void)
+static __init void pmax_setup_memory_region(void)
{
volatile unsigned char *memory_page, dummy;
char old_handler[0x80];
@@ -50,15 +49,14 @@
}
memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
- add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
- BOOT_MEM_RAM);
+ memblock_add(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE);
}
/*
* Use the REX prom calls to get hold of the memory bitmap, and thence
* determine memory size.
*/
-static inline void rex_setup_memory_region(void)
+static __init void rex_setup_memory_region(void)
{
int i, bitmap_size;
unsigned long mem_start = 0, mem_size = 0;
@@ -76,13 +74,13 @@
else if (!mem_size)
mem_start += (8 * bm->pagesize);
else {
- add_memory_region(mem_start, mem_size, BOOT_MEM_RAM);
+ memblock_add(mem_start, mem_size);
mem_start += mem_size + (8 * bm->pagesize);
mem_size = 0;
}
}
if (mem_size)
- add_memory_region(mem_start, mem_size, BOOT_MEM_RAM);
+ memblock_add(mem_start, mem_size);
}
void __init prom_meminit(u32 magic)
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index d4e868b..eaad0ed 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -6,7 +6,7 @@
* for more details.
*
* Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005, 2020 Maciej W. Rozycki
*/
#include <linux/console.h>
#include <linux/export.h>
@@ -15,6 +15,7 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/irqnr.h>
+#include <linux/memblock.h>
#include <linux/param.h>
#include <linux/percpu-defs.h>
#include <linux/sched.h>
@@ -22,6 +23,7 @@
#include <linux/types.h>
#include <linux/pm.h>
+#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -29,7 +31,9 @@
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
+#include <asm/page.h>
#include <asm/reboot.h>
+#include <asm/sections.h>
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/wbflush.h>
@@ -146,6 +150,9 @@
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
+
+ /* Stay away from the firmware working memory area for now. */
+ memblock_reserve(PHYS_OFFSET, __pa_symbol(&_text) - PHYS_OFFSET);
}
/*
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index da0712a..37625ae 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -68,20 +68,24 @@
: arc_mtypes[a.arc]
#endif
+enum {
+ mem_free, mem_prom_used, mem_reserved
+};
+
static inline int memtype_classify_arcs(union linux_memtypes type)
{
switch (type.arcs) {
case arcs_fcontig:
case arcs_free:
- return BOOT_MEM_RAM;
+ return mem_free;
case arcs_atmp:
- return BOOT_MEM_ROM_DATA;
+ return mem_prom_used;
case arcs_eblock:
case arcs_rvpage:
case arcs_bmem:
case arcs_prog:
case arcs_aperm:
- return BOOT_MEM_RESERVED;
+ return mem_reserved;
default:
BUG();
}
@@ -93,15 +97,15 @@
switch (type.arc) {
case arc_free:
case arc_fcontig:
- return BOOT_MEM_RAM;
+ return mem_free;
case arc_atmp:
- return BOOT_MEM_ROM_DATA;
+ return mem_prom_used;
case arc_eblock:
case arc_rvpage:
case arc_bmem:
case arc_prog:
case arc_aperm:
- return BOOT_MEM_RESERVED;
+ return mem_reserved;
default:
BUG();
}
@@ -143,9 +147,17 @@
size = p->pages << ARC_PAGE_SHIFT;
type = prom_memtype_classify(p->type);
- add_memory_region(base, size, type);
+ /* ignore mirrored RAM on IP28/IP30 */
+ if (base < PHYS_OFFSET)
+ continue;
- if (type == BOOT_MEM_ROM_DATA) {
+ memblock_add(base, size);
+
+ if (type == mem_reserved)
+ memblock_reserve(base, size);
+
+ if (type == mem_prom_used) {
+ memblock_reserve(base, size);
if (nr_prom_mem >= 5) {
pr_err("Too many ROM DATA regions");
continue;
diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c
index 80112f2..8f67303 100644
--- a/arch/mips/fw/sni/sniprom.c
+++ b/arch/mips/fw/sni/sniprom.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/memblock.h>
#include <linux/string.h>
#include <linux/console.h>
@@ -131,8 +132,7 @@
}
pr_debug("Bank%d: %08x @ %08x\n", i,
memconf[i].size, memconf[i].base);
- add_memory_region(memconf[i].base, memconf[i].size,
- BOOT_MEM_RAM);
+ memblock_add(memconf[i].base, memconf[i].size);
}
}
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index fd601980..55d9aed 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-if MIPS_GENERIC
+if MIPS_GENERIC_KERNEL
config LEGACY_BOARDS
bool
@@ -73,6 +73,12 @@
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
+config BOARD_INGENIC
+ bool "Support boards based on Ingenic SoCs"
+ select MACH_INGENIC_GENERIC
+ help
+ Enable support for boards based on Ingenic SoCs.
+
config VIRT_BOARD_RANCHU
bool "Support Ranchu platform for Android emulator"
help
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index 2384a6b..e37a59b 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -11,4 +11,5 @@
obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
obj-$(CONFIG_LEGACY_BOARD_OCELOT) += board-ocelot.o
+obj-$(CONFIG_MACH_INGENIC) += board-ingenic.o
obj-$(CONFIG_VIRT_BOARD_RANCHU) += board-ranchu.o
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
index 53c33cb..f8ef2f9 100644
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -8,8 +8,12 @@
# option) any later version.
#
+# Note: order matters, keep the asm/mach-generic include last.
+cflags-$(CONFIG_MACH_INGENIC_SOC) += -I$(srctree)/arch/mips/include/asm/mach-ingenic
cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
+
load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
+zload-$(CONFIG_MIPS_GENERIC) += 0xffffffff81000000
all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
its-y := vmlinux.its.S
diff --git a/arch/mips/generic/board-ingenic.c b/arch/mips/generic/board-ingenic.c
new file mode 100644
index 0000000..0cec0be
--- /dev/null
+++ b/arch/mips/generic/board-ingenic.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support for Ingenic SoCs
+ *
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org>
+ * Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/pm.h>
+#include <linux/sizes.h>
+#include <linux/suspend.h>
+#include <linux/types.h>
+
+#include <asm/bootinfo.h>
+#include <asm/machine.h>
+#include <asm/reboot.h>
+
+static __init char *ingenic_get_system_type(unsigned long machtype)
+{
+ switch (machtype) {
+ case MACH_INGENIC_X2000E:
+ return "X2000E";
+ case MACH_INGENIC_X2000:
+ return "X2000";
+ case MACH_INGENIC_X1830:
+ return "X1830";
+ case MACH_INGENIC_X1000E:
+ return "X1000E";
+ case MACH_INGENIC_X1000:
+ return "X1000";
+ case MACH_INGENIC_JZ4780:
+ return "JZ4780";
+ case MACH_INGENIC_JZ4775:
+ return "JZ4775";
+ case MACH_INGENIC_JZ4770:
+ return "JZ4770";
+ case MACH_INGENIC_JZ4725B:
+ return "JZ4725B";
+ default:
+ return "JZ4740";
+ }
+}
+
+static __init const void *ingenic_fixup_fdt(const void *fdt, const void *match_data)
+{
+ /*
+ * Old devicetree files for the qi,lb60 board did not have a /memory
+ * node. Hardcode the memory info here.
+ */
+ if (!fdt_node_check_compatible(fdt, 0, "qi,lb60") &&
+ fdt_path_offset(fdt, "/memory") < 0)
+ early_init_dt_add_memory_arch(0, SZ_32M);
+
+ mips_machtype = (unsigned long)match_data;
+ system_type = ingenic_get_system_type(mips_machtype);
+
+ return fdt;
+}
+
+static const struct of_device_id ingenic_of_match[] __initconst = {
+ { .compatible = "ingenic,jz4740", .data = (void *)MACH_INGENIC_JZ4740 },
+ { .compatible = "ingenic,jz4725b", .data = (void *)MACH_INGENIC_JZ4725B },
+ { .compatible = "ingenic,jz4770", .data = (void *)MACH_INGENIC_JZ4770 },
+ { .compatible = "ingenic,jz4775", .data = (void *)MACH_INGENIC_JZ4775 },
+ { .compatible = "ingenic,jz4780", .data = (void *)MACH_INGENIC_JZ4780 },
+ { .compatible = "ingenic,x1000", .data = (void *)MACH_INGENIC_X1000 },
+ { .compatible = "ingenic,x1000e", .data = (void *)MACH_INGENIC_X1000E },
+ { .compatible = "ingenic,x1830", .data = (void *)MACH_INGENIC_X1830 },
+ { .compatible = "ingenic,x2000", .data = (void *)MACH_INGENIC_X2000 },
+ { .compatible = "ingenic,x2000e", .data = (void *)MACH_INGENIC_X2000E },
+ {}
+};
+
+MIPS_MACHINE(ingenic) = {
+ .matches = ingenic_of_match,
+ .fixup_fdt = ingenic_fixup_fdt,
+};
+
+static void ingenic_wait_instr(void)
+{
+ __asm__(".set push;\n"
+ ".set mips3;\n"
+ "wait;\n"
+ ".set pop;\n"
+ );
+}
+
+static void ingenic_halt(void)
+{
+ for (;;)
+ ingenic_wait_instr();
+}
+
+static int __maybe_unused ingenic_pm_enter(suspend_state_t state)
+{
+ ingenic_wait_instr();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops ingenic_pm_ops __maybe_unused = {
+ .valid = suspend_valid_only_mem,
+ .enter = ingenic_pm_enter,
+};
+
+static int __init ingenic_pm_init(void)
+{
+ if (boot_cpu_type() == CPU_XBURST) {
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ suspend_set_ops(&ingenic_pm_ops);
+ _machine_halt = ingenic_halt;
+ }
+
+ return 0;
+
+}
+late_initcall(ingenic_pm_init);
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
index 805d013..66a1933 100644
--- a/arch/mips/generic/init.c
+++ b/arch/mips/generic/init.c
@@ -39,12 +39,11 @@
/* Already set up */
return (void *)fdt;
- if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_passed_dtb)) {
+ if (fw_passed_dtb && !fdt_check_header((void *)fw_passed_dtb)) {
/*
- * We booted using the UHI boot protocol, so we have been
- * provided with the appropriate device tree for the board.
- * Make use of it & search for any machine struct based upon
- * the root compatible string.
+ * We have been provided with the appropriate device tree for
+ * the board. Make use of it & search for any machine struct
+ * based upon the root compatible string.
*/
fdt = (void *)fw_passed_dtb;
@@ -106,7 +105,7 @@
if (mach && mach->fixup_fdt)
fdt = mach->fixup_fdt(fdt, mach_match_data);
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ fw_init_cmdline();
__dt_setup_arch((void *)fdt);
}
diff --git a/arch/mips/generic/proc.c b/arch/mips/generic/proc.c
index 4c992809..cce2fde 100644
--- a/arch/mips/generic/proc.c
+++ b/arch/mips/generic/proc.c
@@ -8,11 +8,16 @@
#include <asm/bootinfo.h>
+char *system_type;
+
const char *get_system_type(void)
{
const char *str;
int err;
+ if (system_type)
+ return system_type;
+
err = of_property_read_string(of_root, "model", &str);
if (!err)
return str;
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 147c932..aa03b12 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -79,8 +79,10 @@
MACH_INGENIC_JZ4775,
MACH_INGENIC_JZ4780,
MACH_INGENIC_X1000,
+ MACH_INGENIC_X1000E,
MACH_INGENIC_X1830,
MACH_INGENIC_X2000,
+ MACH_INGENIC_X2000E,
};
extern char *system_type;
@@ -88,13 +90,6 @@
extern unsigned long mips_machtype;
-#define BOOT_MEM_RAM 1
-#define BOOT_MEM_ROM_DATA 2
-#define BOOT_MEM_RESERVED 3
-#define BOOT_MEM_INIT_RAM 4
-#define BOOT_MEM_NOMAP 5
-
-extern void add_memory_region(phys_addr_t start, phys_addr_t size, long type);
extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max);
extern void prom_init(void);
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 78cf7e3..f2e216e 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -171,9 +171,6 @@
#ifndef cpu_has_llsc
#define cpu_has_llsc __isa_ge_or_opt(1, MIPS_CPU_LLSC)
#endif
-#ifndef cpu_has_bp_ghist
-#define cpu_has_bp_ghist __opt(MIPS_CPU_BP_GHIST)
-#endif
#ifndef kernel_uses_llsc
#define kernel_uses_llsc cpu_has_llsc
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 388a82f..c9222cc 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -398,7 +398,6 @@
#define MIPS_CPU_RW_LLB BIT_ULL(32) /* LLADDR/LLB writes are allowed */
#define MIPS_CPU_LPA BIT_ULL(33) /* CPU supports Large Physical Addressing */
#define MIPS_CPU_CDMM BIT_ULL(34) /* CPU has Common Device Memory Map */
-#define MIPS_CPU_BP_GHIST BIT_ULL(35) /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP BIT_ULL(36) /* Small (1KB) page support */
#define MIPS_CPU_FTLB BIT_ULL(37) /* CPU has Fixed-page-size TLB */
#define MIPS_CPU_NAN_LEGACY BIT_ULL(38) /* Legacy NaN implemented */
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index 2bf8f60..d852484 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -21,7 +21,7 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
{ \
- if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
@@ -133,7 +133,7 @@
if (!access_ok(uaddr, sizeof(u32)))
return -EFAULT;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
+ if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
__asm__ __volatile__(
"# futex_atomic_cmpxchg_inatomic \n"
" .set push \n"
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
index 655a6db..0992cad 100644
--- a/arch/mips/include/asm/idle.h
+++ b/arch/mips/include/asm/idle.h
@@ -15,6 +15,8 @@
return cpu_wait == r4k_wait;
}
+extern void __init check_wait(void);
+
extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
diff --git a/arch/mips/include/asm/llsc.h b/arch/mips/include/asm/llsc.h
index c49738b..ec09fe5 100644
--- a/arch/mips/include/asm/llsc.h
+++ b/arch/mips/include/asm/llsc.h
@@ -28,7 +28,7 @@
* works around a bug present in R10000 CPUs prior to revision 3.0 that could
* cause ll-sc sequences to execute non-atomically.
*/
-#if R10000_LLSC_WAR
+#ifdef CONFIG_WAR_R10000_LLSC
# define __SC_BEQZ "beqzl "
#elif MIPS_ISA_REV >= 6
# define __SC_BEQZ "beqzc "
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index fef0fda..ecda729 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -31,7 +31,7 @@
{
unsigned long result;
- if (kernel_uses_llsc && R10000_LLSC_WAR) {
+ if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
unsigned long temp;
__asm__ __volatile__(
@@ -80,7 +80,7 @@
{
unsigned long result;
- if (kernel_uses_llsc && R10000_LLSC_WAR) {
+ if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
unsigned long temp;
__asm__ __volatile__(
diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h
deleted file mode 100644
index 3687a02..0000000
--- a/arch/mips/include/asm/m48t37.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
- */
-#ifndef _ASM_M48T37_H
-#define _ASM_M48T37_H
-
-#include <linux/spinlock.h>
-
-extern spinlock_t rtc_lock;
-
-struct m48t37_rtc {
- volatile u8 pad[0x7ff0]; /* NVRAM */
- volatile u8 flags;
- volatile u8 century;
- volatile u8 alarm_sec;
- volatile u8 alarm_min;
- volatile u8 alarm_hour;
- volatile u8 alarm_data;
- volatile u8 interrupts;
- volatile u8 watchdog;
- volatile u8 control;
- volatile u8 sec;
- volatile u8 min;
- volatile u8 hour;
- volatile u8 day;
- volatile u8 date;
- volatile u8 month;
- volatile u8 year;
-};
-
-#define M48T37_RTC_SET 0x80
-#define M48T37_RTC_STOPPED 0x80
-#define M48T37_RTC_READ 0x40
-
-#endif /* _ASM_M48T37_H */
diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
index ecfbb5a..e6e5272 100644
--- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
@@ -39,7 +39,6 @@
#define cpu_has_guestctl2 0
#define cpu_has_guestid 0
#define cpu_has_drg 0
-#define cpu_has_bp_ghist 0
#define cpu_has_mips16 0
#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
index d25846a..d16add7 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -120,141 +120,4 @@
return (v >> gpio) & 1;
}
-/**********************************************************************/
-
-/* Linux gpio framework integration.
-*
-* 4 use cases of Alchemy GPIOS:
-*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
-* Board must register gpiochips.
-*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
-* A gpiochip for the 75 GPIOs is registered.
-*
-*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
-* the boards' gpio.h must provide the linux gpio wrapper functions,
-*
-*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
-* inlinable gpio functions are provided which enable access to the
-* Au1300 gpios only by using the numbers straight out of the data-
-* sheets.
-
-* Cases 1 and 3 are intended for boards which want to provide their own
-* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
-* which are in part provided by spare Au1300 GPIO pins and in part by
-* an external FPGA but you still want them to be accessible in linux
-* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
-* as required).
-*/
-
-#ifndef CONFIG_GPIOLIB
-
-#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300
-
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
-
-static inline int gpio_direction_input(unsigned int gpio)
-{
- return au1300_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned int gpio, int v)
-{
- return au1300_gpio_direction_output(gpio, v);
-}
-
-static inline int gpio_get_value(unsigned int gpio)
-{
- return au1300_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int v)
-{
- au1300_gpio_set_value(gpio, v);
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
- return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
- gpio_set_value(gpio, value);
-}
-
-static inline int gpio_is_valid(unsigned int gpio)
-{
- return au1300_gpio_is_valid(gpio);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
- return au1300_gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
- return au1300_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return au1300_irq_to_gpio(irq);
-}
-
-static inline int gpio_request(unsigned int gpio, const char *label)
-{
- return 0;
-}
-
-static inline int gpio_request_one(unsigned gpio,
- unsigned long flags, const char *label)
-{
- return 0;
-}
-
-static inline int gpio_request_array(struct gpio *array, size_t num)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline void gpio_free_array(struct gpio *array, size_t num)
-{
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return -ENOSYS;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-}
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-{
- return -ENOSYS;
-}
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */
-
-#endif /* CONFIG GPIOLIB */
-
#endif /* _GPIO_AU1300_H_ */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index d7f1ef2..93817bf 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -10,6 +10,7 @@
#include <linux/bcma/bcma.h>
#include <linux/bcma/bcma_soc.h>
#include <linux/bcm47xx_nvram.h>
+#include <linux/bcm47xx_sprom.h>
enum bcm47xx_bus_type {
#ifdef CONFIG_BCM47XX_SSB
@@ -32,9 +33,6 @@
extern union bcm47xx_bus bcm47xx_bus;
extern enum bcm47xx_bus_type bcm47xx_bus_type;
-void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
- bool fallback);
-
void bcm47xx_set_system_type(u16 chip_id);
#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/war.h b/arch/mips/include/asm/mach-cavium-octeon/war.h
deleted file mode 100644
index 2421411..0000000
--- a/arch/mips/include/asm/mach-cavium-octeon/war.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2008 Cavium Networks <support@caviumnetworks.com>
- */
-#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
-#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#define CAVIUM_OCTEON_DCACHE_PREFETCH_WAR \
- OCTEON_IS_MODEL(OCTEON_CN6XXX)
-
-#endif /* __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H */
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index 72ac2c2..079889c 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -9,7 +9,7 @@
#define __ASM_MACH_GENERIC_IRQ_H
#ifndef NR_IRQS
-#define NR_IRQS 128
+#define NR_IRQS 256
#endif
#ifdef CONFIG_I8259
diff --git a/arch/mips/include/asm/mach-generic/war.h b/arch/mips/include/asm/mach-generic/war.h
deleted file mode 100644
index f0f4a35..0000000
--- a/arch/mips/include/asm/mach-generic/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MACH_GENERIC_WAR_H
-#define __ASM_MACH_GENERIC_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MACH_GENERIC_WAR_H */
diff --git a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ingenic/cpu-feature-overrides.h
similarity index 100%
rename from arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
rename to arch/mips/include/asm/mach-ingenic/cpu-feature-overrides.h
diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h
deleted file mode 100644
index b48eb4a..0000000
--- a/arch/mips/include/asm/mach-ip22/war.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_IP22_WAR_H
-#define __ASM_MIPS_MACH_IP22_WAR_H
-
-/*
- * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
- */
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 1
-#define R4600_V1_HIT_CACHEOP_WAR 1
-#define R4600_V2_HIT_CACHEOP_WAR 1
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_IP22_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h
deleted file mode 100644
index 82c23ce..0000000
--- a/arch/mips/include/asm/mach-ip27/kmalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_IP27_KMALLOC_H
-#define __ASM_MACH_IP27_KMALLOC_H
-
-/*
- * All happy, no need to define ARCH_DMA_MINALIGN
- */
-
-#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h
deleted file mode 100644
index ef3efce..0000000
--- a/arch/mips/include/asm/mach-ip27/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_IP27_WAR_H
-#define __ASM_MIPS_MACH_IP27_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 1
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_IP27_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
index ba8b4e3..613bbc1 100644
--- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -25,7 +25,7 @@
#define cpu_has_mcheck 0
#define cpu_has_ejtag 0
-#define cpu_has_llsc 1
+#define cpu_has_llsc 0
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0 /* see probe_pcache() */
#define cpu_has_ic_fills_f_dc 0
diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h
deleted file mode 100644
index 61cd673..0000000
--- a/arch/mips/include/asm/mach-ip28/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_IP28_WAR_H
-#define __ASM_MIPS_MACH_IP28_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 1
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_IP28_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip30/irq.h b/arch/mips/include/asm/mach-ip30/irq.h
deleted file mode 100644
index 27ba899..0000000
--- a/arch/mips/include/asm/mach-ip30/irq.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * HEART IRQ defines
- *
- * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
- * 2014-2016 Joshua Kinard <kumba@gentoo.org>
- *
- */
-
-#ifndef __ASM_MACH_IP30_IRQ_H
-#define __ASM_MACH_IP30_IRQ_H
-
-/*
- * HEART has 64 hardware interrupts, but use 128 to leave room for a few
- * software interrupts as well (such as the CPU timer interrupt.
- */
-#define NR_IRQS 128
-
-extern void __init ip30_install_ipi(void);
-
-/*
- * HEART has 64 interrupt vectors available to it, subdivided into five
- * priority levels. They are numbered 0 to 63.
- */
-#define HEART_NUM_IRQS 64
-
-/*
- * These are the five interrupt priority levels and their corresponding
- * CPU IPx interrupt pins.
- *
- * Level 4 - Error Interrupts.
- * Level 3 - HEART timer interrupt.
- * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
- * Level 1 - General device interrupts.
- * Level 0 - General device GFX flow control interrupts.
- */
-#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
-#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
-#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
-#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
-#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
-
-/* HEART L0 Interrupts (Low Priority) */
-#define HEART_L0_INT_GENERIC 0
-#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
-#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
-
-/* HEART L2 Interrupts (High Priority) */
-#define HEART_L2_INT_RESCHED_CPU_0 46
-#define HEART_L2_INT_RESCHED_CPU_1 47
-#define HEART_L2_INT_CALL_CPU_0 48
-#define HEART_L2_INT_CALL_CPU_1 49
-
-/* HEART L3 Interrupts (Compare/Counter Timer) */
-#define HEART_L3_INT_TIMER 50
-
-/* HEART L4 Interrupts (Errors) */
-#define HEART_L4_INT_XWID_ERR_9 51
-#define HEART_L4_INT_XWID_ERR_A 52
-#define HEART_L4_INT_XWID_ERR_B 53
-#define HEART_L4_INT_XWID_ERR_C 54
-#define HEART_L4_INT_XWID_ERR_D 55
-#define HEART_L4_INT_XWID_ERR_E 56
-#define HEART_L4_INT_XWID_ERR_F 57
-#define HEART_L4_INT_XWID_ERR_XBOW 58
-#define HEART_L4_INT_CPU_BUS_ERR_0 59
-#define HEART_L4_INT_CPU_BUS_ERR_1 60
-#define HEART_L4_INT_CPU_BUS_ERR_2 61
-#define HEART_L4_INT_CPU_BUS_ERR_3 62
-#define HEART_L4_INT_HEART_EXCP 63
-
-/*
- * Power Switch is wired via BaseIO BRIDGE slot #6.
- *
- * ACFail is wired via BaseIO BRIDGE slot #7.
- */
-#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
-
-#include <asm/mach-generic/irq.h>
-
-#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
-#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)
-#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4)
-#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5)
-#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6)
-
-#endif /* __ASM_MACH_IP30_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h
deleted file mode 100644
index a1fa0c1..0000000
--- a/arch/mips/include/asm/mach-ip30/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_IP30_WAR_H
-#define __ASM_MIPS_MACH_IP30_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#ifdef CONFIG_CPU_R10000
-#define R10000_LLSC_WAR 1
-#else
-#define R10000_LLSC_WAR 0
-#endif
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_IP30_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h
deleted file mode 100644
index e77b9d1..0000000
--- a/arch/mips/include/asm/mach-ip32/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_IP32_WAR_H
-#define __ASM_MIPS_MACH_IP32_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_IP32_WAR_H */
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
deleted file mode 100644
index 27c543b..0000000
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 IRQ definitions
- */
-
-#ifndef __ASM_MACH_JZ4740_IRQ_H__
-#define __ASM_MACH_JZ4740_IRQ_H__
-
-#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 256
-
-#endif
diff --git a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h
deleted file mode 100644
index 00d6026..0000000
--- a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LOONGSON2EF_MC146818RTC_H
-#define __ASM_MACH_LOONGSON2EF_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_IRQ 8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD 0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LOONGSON2EF_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h
index bf24809..98ea977 100644
--- a/arch/mips/include/asm/mach-loongson64/irq.h
+++ b/arch/mips/include/asm/mach-loongson64/irq.h
@@ -5,7 +5,8 @@
/* cpu core interrupt numbers */
#define NR_IRQS_LEGACY 16
#define NR_MIPS_CPU_IRQS 8
-#define NR_IRQS (NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + 256)
+#define NR_MAX_CHAINED_IRQS 40 /* Chained IRQs means those not directly used by devices */
+#define NR_IRQS (NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + NR_MAX_CHAINED_IRQS + 256)
#define MIPS_CPU_IRQ_BASE NR_IRQS_LEGACY
diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index 5eaca4f..ebb1dea 100644
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -10,13 +10,9 @@
#define _ASM_MACH_LOONGSON64_MMZONE_H
#define NODE_ADDRSPACE_SHIFT 44
-#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
-#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
-#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
-#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
-#define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT)
+#define nid_to_addrbase(nid) ((unsigned long)(nid) << NODE_ADDRSPACE_SHIFT)
extern struct pglist_data *__node_data[];
diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h
deleted file mode 100644
index 7c97b71..0000000
--- a/arch/mips/include/asm/mach-malta/malta-dtshim.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2015 Imagination Technologies
- * Author: Paul Burton <paul.burton@mips.com>
- */
-
-#ifndef __MIPS_MALTA_DTSHIM_H__
-#define __MIPS_MALTA_DTSHIM_H__
-
-#include <linux/init.h>
-
-#ifdef CONFIG_MIPS_MALTA
-
-extern void __init *malta_dt_shim(void *fdt);
-
-#else /* !CONFIG_MIPS_MALTA */
-
-static inline void *malta_dt_shim(void *fdt)
-{
- return fdt;
-}
-
-#endif /* !CONFIG_MIPS_MALTA */
-
-#endif /* __MIPS_MALTA_DTSHIM_H__ */
diff --git a/arch/mips/include/asm/mach-malta/malta-pm.h b/arch/mips/include/asm/mach-malta/malta-pm.h
deleted file mode 100644
index 2a5146d..0000000
--- a/arch/mips/include/asm/mach-malta/malta-pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2014 Imagination Technologies
- * Author: Paul Burton <paul.burton@mips.com>
- */
-
-#ifndef __ASM_MIPS_MACH_MALTA_PM_H__
-#define __ASM_MIPS_MACH_MALTA_PM_H__
-
-#include <asm/mips-boards/piix4.h>
-
-#ifdef CONFIG_MIPS_MALTA_PM
-
-/**
- * mips_pm_suspend - enter a suspend state
- * @state: the state to enter, one of PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_*
- *
- * Enters a suspend state via the Malta's PIIX4. If the state to be entered
- * is one which loses context (eg. SOFF) then this function will never
- * return.
- */
-extern int mips_pm_suspend(unsigned state);
-
-#else /* !CONFIG_MIPS_MALTA_PM */
-
-static inline int mips_pm_suspend(unsigned state)
-{
- return -EINVAL;
-}
-
-#endif /* !CONFIG_MIPS_MALTA_PM */
-
-#endif /* __ASM_MIPS_MACH_MALTA_PM_H__ */
diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h
deleted file mode 100644
index d62d2ff..0000000
--- a/arch/mips/include/asm/mach-malta/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 1
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h
deleted file mode 100644
index 23ecf81..0000000
--- a/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Cavium, Inc.
- */
-#ifndef __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_tx39_cache 0
-#define cpu_has_counter 1
-#define cpu_has_llsc 1
-/*
- * We Disable LL/SC on non SMP systems as it is faster to disable
- * interrupts for atomic access than a LL/SC.
- */
-#ifdef CONFIG_SMP
-# define kernel_uses_llsc 1
-#else
-# define kernel_uses_llsc 0
-#endif
-
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-#define cpu_dcache_line_size() 128
-#define cpu_icache_line_size() 128
-#define cpu_has_octeon_cache 1
-#define cpu_has_4k_cache 0
-#else
-#define cpu_has_4k_cache 1
-#endif
-
-#endif /* __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-paravirt/irq.h b/arch/mips/include/asm/mach-paravirt/irq.h
deleted file mode 100644
index 9b4d35e..0000000
--- a/arch/mips/include/asm/mach-paravirt/irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Cavium, Inc.
- */
-#ifndef __ASM_MACH_PARAVIRT_IRQ_H__
-#define __ASM_MACH_PARAVIRT_IRQ_H__
-
-#define NR_IRQS 64
-#define MIPS_CPU_IRQ_BASE 1
-
-#define MIPS_IRQ_PCIA (MIPS_CPU_IRQ_BASE + 8)
-
-#define MIPS_IRQ_MBOX0 (MIPS_CPU_IRQ_BASE + 32)
-#define MIPS_IRQ_MBOX1 (MIPS_CPU_IRQ_BASE + 33)
-
-#endif /* __ASM_MACH_PARAVIRT_IRQ_H__ */
diff --git a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
deleted file mode 100644
index c9f5769..0000000
--- a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Cavium, Inc
- */
-#ifndef __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
-#define __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
-
-#define CP0_EBASE $15, 1
-
- .macro kernel_entry_setup
-#ifdef CONFIG_SMP
- mfc0 t0, CP0_EBASE
- andi t0, t0, 0x3ff # CPUNum
- beqz t0, 1f
- # CPUs other than zero goto smp_bootstrap
- j smp_bootstrap
-#endif /* CONFIG_SMP */
-
-1:
- .endm
-
-/*
- * Do SMP slave processor setup necessary before we can safely execute
- * C code.
- */
- .macro smp_slave_setup
- mfc0 t0, CP0_EBASE
- andi t0, t0, 0x3ff # CPUNum
- slti t1, t0, NR_CPUS
- bnez t1, 1f
-2:
- di
- wait
- b 2b # Unknown CPU, loop forever.
-1:
- PTR_LA t1, paravirt_smp_sp
- PTR_SLL t0, PTR_SCALESHIFT
- PTR_ADDU t1, t1, t0
-3:
- PTR_L sp, 0(t1)
- beqz sp, 3b # Spin until told to proceed.
-
- PTR_LA t1, paravirt_smp_gp
- PTR_ADDU t1, t1, t0
- sync
- PTR_L gp, 0(t1)
- .endm
-
-#endif /* __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
deleted file mode 100644
index 85b5b8e..0000000
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * gpio.h: GPIO Support for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- */
-#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H
-#define __ASM_MIPS_MACH_PNX833X_GPIO_H
-
-/* BIG FAT WARNING: races danger!
- No protections exist here. Current users are only early init code,
- when locking is not needed because no concurrency yet exists there,
- and GPIO IRQ dispatcher, which does locking.
- However, if many uses will ever happen, proper locking will be needed
- - including locking between different uses
-*/
-
-#include <asm/mach-pnx833x/pnx833x.h>
-
-#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0)
-#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0)
-
-/* Initialize GPIO to a known state */
-static inline void pnx833x_gpio_init(void)
-{
- PNX833X_PIO_DIR = 0;
- PNX833X_PIO_DIR2 = 0;
- PNX833X_PIO_SEL = 0;
- PNX833X_PIO_SEL2 = 0;
- PNX833X_PIO_INT_EDGE = 0;
- PNX833X_PIO_INT_HI = 0;
- PNX833X_PIO_INT_LO = 0;
-
- /* clear any GPIO interrupt requests */
- PNX833X_PIO_INT_CLEAR = 0xffff;
- PNX833X_PIO_INT_CLEAR = 0;
- PNX833X_PIO_INT_ENABLE = 0;
-}
-
-/* Select GPIO direction for a pin */
-static inline void pnx833x_gpio_select_input(unsigned int pin)
-{
- if (pin < 32)
- CLEAR_REG_BIT(PNX833X_PIO_DIR, pin);
- else
- CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
-}
-static inline void pnx833x_gpio_select_output(unsigned int pin)
-{
- if (pin < 32)
- SET_REG_BIT(PNX833X_PIO_DIR, pin);
- else
- SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
-}
-
-/* Select GPIO or alternate function for a pin */
-static inline void pnx833x_gpio_select_function_io(unsigned int pin)
-{
- if (pin < 32)
- CLEAR_REG_BIT(PNX833X_PIO_SEL, pin);
- else
- CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
-}
-static inline void pnx833x_gpio_select_function_alt(unsigned int pin)
-{
- if (pin < 32)
- SET_REG_BIT(PNX833X_PIO_SEL, pin);
- else
- SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
-}
-
-/* Read GPIO pin */
-static inline int pnx833x_gpio_read(unsigned int pin)
-{
- if (pin < 32)
- return (PNX833X_PIO_IN >> pin) & 1;
- else
- return (PNX833X_PIO_IN2 >> (pin & 31)) & 1;
-}
-
-/* Write GPIO pin */
-static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin)
-{
- if (pin < 32) {
- if (val)
- SET_REG_BIT(PNX833X_PIO_OUT, pin);
- else
- CLEAR_REG_BIT(PNX833X_PIO_OUT, pin);
- } else {
- if (val)
- SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
- else
- CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
- }
-}
-
-/* Configure GPIO interrupt */
-#define GPIO_INT_NONE 0
-#define GPIO_INT_LEVEL_LOW 1
-#define GPIO_INT_LEVEL_HIGH 2
-#define GPIO_INT_EDGE_RISING 3
-#define GPIO_INT_EDGE_FALLING 4
-#define GPIO_INT_EDGE_BOTH 5
-static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin)
-{
- switch (when) {
- case GPIO_INT_LEVEL_LOW:
- CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
- SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- case GPIO_INT_LEVEL_HIGH:
- CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- case GPIO_INT_EDGE_RISING:
- SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- case GPIO_INT_EDGE_FALLING:
- SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
- SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- case GPIO_INT_EDGE_BOTH:
- SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
- SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- default:
- CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
- break;
- }
-}
-
-/* Enable/disable GPIO interrupt */
-static inline void pnx833x_gpio_enable_irq(unsigned int pin)
-{
- SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
-}
-static inline void pnx833x_gpio_disable_irq(unsigned int pin)
-{
- CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
-}
-
-/* Clear GPIO interrupt request */
-static inline void pnx833x_gpio_clear_irq(unsigned int pin)
-{
- SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
- CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
-}
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
deleted file mode 100644
index 32d8063..0000000
--- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-/*
- * irq.h: IRQ mappings for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- */
-
-#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
-#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
-/*
- * The "IRQ numbers" are completely virtual.
- *
- * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
- * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
- * numbers 49..64 for (virtual) GPIO interrupts.
- *
- * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
- * connected to PIC, which uses core hardware interrupt 2, and also
- * a timer interrupt through hardware interrupt 5.
- * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
- * numbers 65..80 for (virtual) GPIO interrupts.
- *
- */
-#include <irq.h>
-
-#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7)
-
-/* Interrupts supported by PIC */
-#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1)
-#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2)
-#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3)
-#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4)
-#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5)
-#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6)
-#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7)
-#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8)
-#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9)
-#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10)
-#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11)
-#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12)
-#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13)
-#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13)
-#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14)
-#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15)
-#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16)
-#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17)
-#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18)
-#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19)
-#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20)
-#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21)
-#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22)
-#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23)
-#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24)
-#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25)
-#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26)
-#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27)
-#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28)
-#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29)
-#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30)
-#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31)
-#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32)
-#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33)
-#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34)
-#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35)
-#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36)
-
-#if defined(CONFIG_SOC_PNX8335)
-#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37)
-#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38)
-#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39)
-#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40)
-#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41)
-#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42)
-#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43)
-#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44)
-#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45)
-#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46)
-#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47)
-#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48)
-#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49)
-#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50)
-#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51)
-#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52)
-#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53)
-#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54)
-#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55)
-#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56)
-#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57)
-#endif
-
-/* GPIO interrupts */
-#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0)
-#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1)
-#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2)
-#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3)
-#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4)
-#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5)
-#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6)
-#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7)
-#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8)
-#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9)
-#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10)
-#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11)
-#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12)
-#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13)
-#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14)
-#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15)
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx833x/irq.h b/arch/mips/include/asm/mach-pnx833x/irq.h
deleted file mode 100644
index b7a6dab..0000000
--- a/arch/mips/include/asm/mach-pnx833x/irq.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * irq.h: IRQ mappings for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- */
-
-#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H
-#define __ASM_MIPS_MACH_PNX833X_IRQ_H
-/*
- * The "IRQ numbers" are completely virtual.
- *
- * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
- * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
- * numbers 49..64 for (virtual) GPIO interrupts.
- *
- * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
- * connected to PIC, which uses core hardware interrupt 2, and also
- * a timer interrupt through hardware interrupt 5.
- * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
- * numbers 65..80 for (virtual) GPIO interrupts.
- *
- */
-#if defined(CONFIG_SOC_PNX8335)
- #define PNX833X_PIC_NUM_IRQ 58
-#else
- #define PNX833X_PIC_NUM_IRQ 37
-#endif
-
-#define MIPS_CPU_NUM_IRQ 8
-#define PNX833X_GPIO_NUM_IRQ 16
-
-#define MIPS_CPU_IRQ_BASE 0
-#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ)
-#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ)
-#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ)
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h
deleted file mode 100644
index 00bb67a..0000000
--- a/arch/mips/include/asm/mach-pnx833x/pnx833x.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * pnx833x.h: Register mappings for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- */
-#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H
-#define __ASM_MIPS_MACH_PNX833X_PNX833X_H
-
-/* All regs are accessed in KSEG1 */
-#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul)
-
-#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs)))
-
-/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */
-
-/* Read access to multibit fields */
-#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field)
-#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field)
-
-/* Use PNX833X_FIELD to extract a field from val */
-#define PNX_FIELD(cpu, val, reg, field) \
- (((val) & PNX##cpu##_##reg##_##field##_MASK) >> \
- PNX##cpu##_##reg##_##field##_SHIFT)
-#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field)
-#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field)
-#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field)
-
-/* Use PNX833X_REGFIELD to extract a field from a register */
-#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field)
-#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field)
-#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field)
-
-
-#define PNX_WRITEFIELD(cpu, val, reg, field) \
- (PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \
- ((val) << PNX##cpu##_##reg##_##field##_SHIFT))
-#define PNX833X_WRITEFIELD(val, reg, field) \
- PNX_WRITEFIELD(833X, val, reg, field)
-#define PNX8330_WRITEFIELD(val, reg, field) \
- PNX_WRITEFIELD(8330, val, reg, field)
-#define PNX8335_WRITEFIELD(val, reg, field) \
- PNX_WRITEFIELD(8335, val, reg, field)
-
-
-/* Macros to detect CPU type */
-
-#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC)
-#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000
-#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12
-#define PNX8330_CONFIG_MODULE_MAJREV 4
-#define PNX8335_CONFIG_MODULE_MAJREV 5
-#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
- PNX8330_CONFIG_MODULE_MAJREV)
-#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
- PNX8335_CONFIG_MODULE_MAJREV)
-
-
-
-#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004)
-#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014)
-
-#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs))
-#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0)
-#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4)
-#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */
-#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3
-#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq))
-
-#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228)
-#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */
-#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */
-#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3
-
-#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020)
-#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f
-#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0
-
-#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004)
-#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */
-
-#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040)
-#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000
-#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19
-
-#define PNX833X_PIO_IN PNX833X_REG(0xF000)
-#define PNX833X_PIO_OUT PNX833X_REG(0xF004)
-#define PNX833X_PIO_DIR PNX833X_REG(0xF008)
-#define PNX833X_PIO_SEL PNX833X_REG(0xF014)
-#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020)
-#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024)
-#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028)
-#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0)
-#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4)
-#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8)
-#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C)
-#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060)
-#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064)
-#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068)
-
-#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000)
-#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF)
-#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000)
-#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF)
-
-#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000)
-#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF)
-
-#define PNX833X_CONFIG_USB PNX833X_REG(0x7008)
-
-#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000)
-#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF)
-#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000)
-#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF)
-
-#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000)
-#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF)
-#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC)
-
-#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
-#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16
-#define PNX833X_IDE_MODULE_ID_VALUE 0xA009
-
-
-#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004)
-#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008)
-#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C)
-#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010)
-#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014)
-#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018)
-#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C)
-#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020)
-
-#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14)
-#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14
-
-#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7)
-#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7
-
-#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9)
-#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9
-
-#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000)
-
-#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3)
-#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3
-
-#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2)
-#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2
-
-#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1)
-#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1
-
-#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0)
-#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0
-
-#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \
- (PNX833X_MIU_CONFIG_SPI = \
- ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \
- ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \
- ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \
- ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT))
-
-#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000)
-#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF)
-#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC)
-
-#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
-#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16
-#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902
-
- /* I/O location(gets remapped)*/
-#define PNX8335_NAND_BASE 0x18000000
-/* I/O location with CLE high */
-#define PNX8335_NAND_CLE_MASK 0x00100000
-/* I/O location with ALE high */
-#define PNX8335_NAND_ALE_MASK 0x00010000
-
-#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000)
-#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF)
-#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC)
-
-#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
-#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16
-#define PNX8335_SATA_MODULE_ID_VALUE 0xA099
-
-#endif
diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h
deleted file mode 100644
index af430d2..0000000
--- a/arch/mips/include/asm/mach-rc32434/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h
deleted file mode 100644
index eca16d1..0000000
--- a/arch/mips/include/asm/mach-rm/war.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_RM_WAR_H
-#define __ASM_MIPS_MACH_RM_WAR_H
-
-/*
- * The RM200C seems to have been shipped only with V2.0 R4600s
- */
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 1
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_RM_WAR_H */
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
deleted file mode 100644
index 4755b611..0000000
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H
-#define __ASM_MIPS_MACH_SIBYTE_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-
-#if defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
-
-#ifndef __ASSEMBLY__
-extern int sb1250_m3_workaround_needed(void);
-#endif
-
-#define BCM1250_M3_WAR sb1250_m3_workaround_needed()
-#define SIBYTE_1956_WAR 1
-
-#else
-
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-
-#endif
-
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h
deleted file mode 100644
index 445abb4e..0000000
--- a/arch/mips/include/asm/mach-tx49xx/war.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H
-#define __ASM_MIPS_MACH_TX49XX_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 1
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */
diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h
index 65de4fb..254be3d 100644
--- a/arch/mips/include/asm/mips-boards/malta.h
+++ b/arch/mips/include/asm/mips-boards/malta.h
@@ -92,4 +92,6 @@
#define MALTA_JMPRS_REG 0x1f000210
+extern void __init *malta_dt_shim(void *fdt);
+
#endif /* __ASM_MIPS_BOARDS_MALTA_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 4ddc12e..a0e8ae5 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -389,6 +389,13 @@
#define ST0_CU3 0x80000000
#define ST0_XX 0x80000000 /* MIPS IV naming */
+/* in-kernel enabled CUs */
+#ifdef CONFIG_CPU_LOONGSON64
+#define ST0_KERNEL_CUMASK (ST0_CU0 | ST0_CU2)
+#else
+#define ST0_KERNEL_CUMASK ST0_CU0
+#endif
+
/*
* Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
*/
@@ -1706,12 +1713,6 @@
#define read_c0_count() __read_32bit_c0_register($9, 0)
#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
-#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
-#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
-
-#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
-#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
-
#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
@@ -1730,12 +1731,6 @@
#define read_c0_guestctl0ext() __read_32bit_c0_register($11, 4)
#define write_c0_guestctl0ext(val) __write_32bit_c0_register($11, 4, val)
-#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
-#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
-
-#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
-#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
-
#define read_c0_status() __read_32bit_c0_register($12, 0)
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
@@ -2728,7 +2723,7 @@
static inline void tlb_read(void)
{
-#if MIPS34K_MISSED_ITLB_WAR
+#ifdef CONFIG_WAR_MIPS34K_MISSED_ITLB
int res = 0;
__asm__ __volatile__(
@@ -2750,7 +2745,7 @@
"tlbr\n\t"
".set reorder");
-#if MIPS34K_MISSED_ITLB_WAR
+#ifdef CONFIG_WAR_MIPS34K_MISSED_ITLB
if ((res & _ULCAST_(1)))
__asm__ __volatile__(
" .set push \n"
diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h
index 6878307..c716e93 100644
--- a/arch/mips/include/asm/netlogic/psb-bootinfo.h
+++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h
@@ -77,21 +77,6 @@
uint64_t avail_mem_map;
};
-enum {
- NETLOGIC_IO_SPACE = 0x10,
- PCIX_IO_SPACE,
- PCIX_CFG_SPACE,
- PCIX_MEMORY_SPACE,
- HT_IO_SPACE,
- HT_CFG_SPACE,
- HT_MEMORY_SPACE,
- SRAM_SPACE,
- FLASH_CONTROLLER_SPACE
-};
-
-#define NLM_MAX_ARGS 64
-#define NLM_MAX_ENVS 32
-
/* This is what netlboot passes and linux boot_mem_map is subtly different */
#define NLM_BOOT_MEM_MAP_MAX 32
struct nlm_boot_mem_map {
@@ -102,6 +87,7 @@
uint32_t type; /* type of memory segment */
} map[NLM_BOOT_MEM_MAP_MAX];
};
+#define NLM_BOOT_MEM_RAM 1
/* Pointer to saved boot loader info */
extern struct psb_info nlm_prom_info;
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 6278776..c114a7b 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -295,6 +295,8 @@
*/
CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
CVMX_BOARD_TYPE_UBNT_E100 = 20002,
+ CVMX_BOARD_TYPE_UBNT_E200 = 20003,
+ CVMX_BOARD_TYPE_UBNT_E220 = 20005,
CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
@@ -396,6 +398,8 @@
/* Customer private range */
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index e26dc41..2362842 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -249,11 +249,6 @@
#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
-#elif defined(CONFIG_MACH_INGENIC)
-
-/* Ingenic uses the WA bit to achieve write-combine memory writes */
-#define _CACHE_UNCACHED_ACCELERATED (1<<_CACHE_SHIFT)
-
#endif
#ifndef _CACHE_CACHABLE_NO_WA
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index dd7a0f5..e5ef0fd 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -37,8 +37,6 @@
_PAGE_GLOBAL | _page_cachable_default)
#define PAGE_KERNEL_NC __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
_PAGE_GLOBAL | _CACHE_CACHABLE_NONCOHERENT)
-#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_WRITE | \
- _page_cachable_default)
#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 856e12f..7834e7c 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -29,6 +29,7 @@
*/
extern unsigned int vced_count, vcei_count;
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
#ifdef CONFIG_32BIT
#ifdef CONFIG_KVM_GUEST
diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h
index afe9e0e..6e73616 100644
--- a/arch/mips/include/asm/r4k-timer.h
+++ b/arch/mips/include/asm/r4k-timer.h
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org)
*/
-#ifndef __ASM_R4K_TYPES_H
-#define __ASM_R4K_TYPES_H
+#ifndef __ASM_R4K_TIMER_H
+#define __ASM_R4K_TIMER_H
#include <linux/compiler.h>
@@ -27,4 +27,4 @@
#endif
-#endif /* __ASM_R4K_TYPES_H */
+#endif /* __ASM_R4K_TIMER_H */
diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h
index c423221..0d03751 100644
--- a/arch/mips/include/asm/sgi/heart.h
+++ b/arch/mips/include/asm/sgi/heart.h
@@ -264,6 +264,57 @@
#define HC_NCOR_MEM_ERR BIT(1)
#define HC_COR_MEM_ERR BIT(0)
+/*
+ * HEART has 64 interrupt vectors available to it, subdivided into five
+ * priority levels. They are numbered 0 to 63.
+ */
+#define HEART_NUM_IRQS 64
+
+/*
+ * These are the five interrupt priority levels and their corresponding
+ * CPU IPx interrupt pins.
+ *
+ * Level 4 - Error Interrupts.
+ * Level 3 - HEART timer interrupt.
+ * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
+ * Level 1 - General device interrupts.
+ * Level 0 - General device GFX flow control interrupts.
+ */
+#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
+#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
+#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
+#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
+#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
+
+/* HEART L0 Interrupts (Low Priority) */
+#define HEART_L0_INT_GENERIC 0
+#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
+#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
+
+/* HEART L2 Interrupts (High Priority) */
+#define HEART_L2_INT_RESCHED_CPU_0 46
+#define HEART_L2_INT_RESCHED_CPU_1 47
+#define HEART_L2_INT_CALL_CPU_0 48
+#define HEART_L2_INT_CALL_CPU_1 49
+
+/* HEART L3 Interrupts (Compare/Counter Timer) */
+#define HEART_L3_INT_TIMER 50
+
+/* HEART L4 Interrupts (Errors) */
+#define HEART_L4_INT_XWID_ERR_9 51
+#define HEART_L4_INT_XWID_ERR_A 52
+#define HEART_L4_INT_XWID_ERR_B 53
+#define HEART_L4_INT_XWID_ERR_C 54
+#define HEART_L4_INT_XWID_ERR_D 55
+#define HEART_L4_INT_XWID_ERR_E 56
+#define HEART_L4_INT_XWID_ERR_F 57
+#define HEART_L4_INT_XWID_ERR_XBOW 58
+#define HEART_L4_INT_CPU_BUS_ERR_0 59
+#define HEART_L4_INT_CPU_BUS_ERR_1 60
+#define HEART_L4_INT_CPU_BUS_ERR_2 61
+#define HEART_L4_INT_CPU_BUS_ERR_3 62
+#define HEART_L4_INT_HEART_EXCP 63
+
extern struct ip30_heart_regs __iomem *heart_regs;
#define heart_read ____raw_readq
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 3e8d2aa..aa430a6 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -450,7 +450,7 @@
*/
.macro CLI
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | STATMASK
+ li t1, ST0_KERNEL_CUMASK | STATMASK
or t0, t1
xori t0, STATMASK
mtc0 t0, CP0_STATUS
@@ -463,7 +463,7 @@
*/
.macro STI
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | STATMASK
+ li t1, ST0_KERNEL_CUMASK | STATMASK
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
@@ -477,7 +477,7 @@
*/
.macro KMODE
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | (STATMASK & ~1)
+ li t1, ST0_KERNEL_CUMASK | (STATMASK & ~1)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
andi t2, t0, ST0_IEP
srl t2, 2
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index 0b0a93b..a4374b4 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -117,6 +117,8 @@
__restore_dsp(next); \
} \
if (cop2_present) { \
+ u32 status = read_c0_status(); \
+ \
set_c0_status(ST0_CU2); \
if ((KSTK_STATUS(prev) & ST0_CU2)) { \
if (cop2_lazy_restore) \
@@ -127,7 +129,7 @@
!cop2_lazy_restore) { \
cop2_restore(next); \
} \
- clear_c0_status(ST0_CU2); \
+ write_c0_status(status); \
} \
__clear_r5_hw_ll_bit(); \
__clear_software_ll_bit(); \
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
index 00805ac..abf980a 100644
--- a/arch/mips/include/asm/txx9/tx4939.h
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -498,7 +498,6 @@
((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2)
void tx4939_wdt_init(void);
-void tx4939_add_memory_regions(void);
void tx4939_setup(void);
void tx4939_time_init(unsigned int tmrnr);
void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask);
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
index e43f800..21443f0 100644
--- a/arch/mips/include/asm/war.h
+++ b/arch/mips/include/asm/war.h
@@ -9,8 +9,6 @@
#ifndef _ASM_WAR_H
#define _ASM_WAR_H
-#include <war.h>
-
/*
* Work around certain R4000 CPU errata (as implemented by GCC):
*
@@ -72,152 +70,4 @@
#define DADDI_WAR 0
#endif
-/*
- * Another R4600 erratum. Due to the lack of errata information the exact
- * technical details aren't known. I've experimentally found that disabling
- * interrupts during indexed I-cache flushes seems to be sufficient to deal
- * with the issue.
- */
-#ifndef R4600_V1_INDEX_ICACHEOP_WAR
-#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform
-#endif
-
-/*
- * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
- *
- * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
- * Hit_Invalidate_D and Create_Dirty_Excl_D should only be
- * executed if there is no other dcache activity. If the dcache is
- * accessed for another instruction immeidately preceding when these
- * cache instructions are executing, it is possible that the dcache
- * tag match outputs used by these cache instructions will be
- * incorrect. These cache instructions should be preceded by at least
- * four instructions that are not any kind of load or store
- * instruction.
- *
- * This is not allowed: lw
- * nop
- * nop
- * nop
- * cache Hit_Writeback_Invalidate_D
- *
- * This is allowed: lw
- * nop
- * nop
- * nop
- * nop
- * cache Hit_Writeback_Invalidate_D
- */
-#ifndef R4600_V1_HIT_CACHEOP_WAR
-#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
-#endif
-
-
-/*
- * Writeback and invalidate the primary cache dcache before DMA.
- *
- * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
- * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
- * operate correctly if the internal data cache refill buffer is empty. These
- * CACHE instructions should be separated from any potential data cache miss
- * by a load instruction to an uncached address to empty the response buffer."
- * (Revision 2.0 device errata from IDT available on https://www.idt.com/
- * in .pdf format.)
- */
-#ifndef R4600_V2_HIT_CACHEOP_WAR
-#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
-#endif
-
-/*
- * Workaround for the Sibyte M3 errata the text of which can be found at
- *
- * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
- *
- * This will enable the use of a special TLB refill handler which does a
- * consistency check on the information in c0_badvaddr and c0_entryhi and
- * will just return and take the exception again if the information was
- * found to be inconsistent.
- */
-#ifndef BCM1250_M3_WAR
-#error Check setting of BCM1250_M3_WAR for your platform
-#endif
-
-/*
- * This is a DUART workaround related to glitches around register accesses
- */
-#ifndef SIBYTE_1956_WAR
-#error Check setting of SIBYTE_1956_WAR for your platform
-#endif
-
-/*
- * Fill buffers not flushed on CACHE instructions
- *
- * Hit_Invalidate_I cacheops invalidate an icache line but the refill
- * for that line can get stale data from the fill buffer instead of
- * accessing memory if the previous icache miss was also to that line.
- *
- * Workaround: generate an icache refill from a different line
- *
- * Affects:
- * MIPS 4K RTL revision <3.0, PRID revision <4
- */
-#ifndef MIPS4K_ICACHE_REFILL_WAR
-#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform
-#endif
-
-/*
- * Missing implicit forced flush of evictions caused by CACHE
- * instruction
- *
- * Evictions caused by a CACHE instructions are not forced on to the
- * bus. The BIU gives higher priority to fetches than to the data from
- * the eviction buffer and no collision detection is performed between
- * fetches and pending data from the eviction buffer.
- *
- * Workaround: Execute a SYNC instruction after the cache instruction
- *
- * Affects:
- * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8
- * MIPS 20Kc RTL revision <4.0, PRID revision <?
- */
-#ifndef MIPS_CACHE_SYNC_WAR
-#error Check setting of MIPS_CACHE_SYNC_WAR for your platform
-#endif
-
-/*
- * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
- * the line which this instruction itself exists, the following
- * operation is not guaranteed."
- *
- * Workaround: do two phase flushing for Index_Invalidate_I
- */
-#ifndef TX49XX_ICACHE_INDEX_INV_WAR
-#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform
-#endif
-
-/*
- * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
- * opposes it being called that) where invalid instructions in the same
- * I-cache line worth of instructions being fetched may case spurious
- * exceptions.
- */
-#ifndef ICACHE_REFILLS_WORKAROUND_WAR
-#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform
-#endif
-
-/*
- * On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
- * may cause ll / sc and lld / scd sequences to execute non-atomically.
- */
-#ifndef R10000_LLSC_WAR
-#error Check setting of R10000_LLSC_WAR for your platform
-#endif
-
-/*
- * 34K core erratum: "Problems Executing the TLBR Instruction"
- */
-#ifndef MIPS34K_MISSED_ITLB_WAR
-#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform
-#endif
-
#endif /* _ASM_WAR_H */
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/ingenic/Kconfig
similarity index 91%
rename from arch/mips/jz4740/Kconfig
rename to arch/mips/ingenic/Kconfig
index c2a6fbf..3238e16 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/ingenic/Kconfig
@@ -1,16 +1,22 @@
# SPDX-License-Identifier: GPL-2.0
-choice
- prompt "Machine type"
- depends on MACH_INGENIC
- default INGENIC_GENERIC_BOARD
-config INGENIC_GENERIC_BOARD
- bool "Generic board"
+config MACH_INGENIC_GENERIC
+ bool
+ select MACH_INGENIC
select MACH_JZ4740
select MACH_JZ4770
select MACH_JZ4780
select MACH_X1000
+choice
+ prompt "Machine type"
+ depends on MACH_INGENIC_SOC
+ default INGENIC_GENERIC_BOARD
+
+config INGENIC_GENERIC_BOARD
+ bool "Generic board"
+ select MACH_INGENIC_GENERIC
+
config JZ4740_QI_LB60
bool "Qi Hardware Ben NanoNote"
select MACH_JZ4740
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
deleted file mode 100644
index f96c0f5e..0000000
--- a/arch/mips/jz4740/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Ingenic JZ4740.
-#
-
-# Object file lists.
-obj-y += setup.o
-
-CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
deleted file mode 100644
index bd35d06..0000000
--- a/arch/mips/jz4740/Platform
+++ /dev/null
@@ -1,3 +0,0 @@
-cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
-load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000
-zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
deleted file mode 100644
index 51d9063..0000000
--- a/arch/mips/jz4740/setup.c
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- * Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org>
- * JZ4740 setup code
- */
-
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/kernel.h>
-#include <linux/libfdt.h>
-#include <linux/of_clk.h>
-#include <linux/of_fdt.h>
-#include <linux/pm.h>
-#include <linux/sizes.h>
-#include <linux/suspend.h>
-
-#include <asm/bootinfo.h>
-#include <asm/fw/fw.h>
-#include <asm/prom.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-static unsigned long __init get_board_mach_type(const void *fdt)
-{
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,x2000"))
- return MACH_INGENIC_X2000;
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1830"))
- return MACH_INGENIC_X1830;
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1000"))
- return MACH_INGENIC_X1000;
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
- return MACH_INGENIC_JZ4780;
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
- return MACH_INGENIC_JZ4770;
- if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4725b"))
- return MACH_INGENIC_JZ4725B;
-
- return MACH_INGENIC_JZ4740;
-}
-
-void __init plat_mem_setup(void)
-{
- void *dtb = (void *)fw_passed_dtb;
-
- __dt_setup_arch(dtb);
-
- /*
- * Old devicetree files for the qi,lb60 board did not have a /memory
- * node. Hardcode the memory info here.
- */
- if (!fdt_node_check_compatible(dtb, 0, "qi,lb60") &&
- fdt_path_offset(dtb, "/memory") < 0)
- early_init_dt_add_memory_arch(0, SZ_32M);
-
- mips_machtype = get_board_mach_type(dtb);
-}
-
-void __init device_tree_init(void)
-{
- if (!initial_boot_params)
- return;
-
- unflatten_and_copy_device_tree();
-}
-
-const char *get_system_type(void)
-{
- switch (mips_machtype) {
- case MACH_INGENIC_X2000:
- return "X2000";
- case MACH_INGENIC_X1830:
- return "X1830";
- case MACH_INGENIC_X1000:
- return "X1000";
- case MACH_INGENIC_JZ4780:
- return "JZ4780";
- case MACH_INGENIC_JZ4770:
- return "JZ4770";
- case MACH_INGENIC_JZ4725B:
- return "JZ4725B";
- default:
- return "JZ4740";
- }
-}
-
-void __init arch_init_irq(void)
-{
- irqchip_init();
-}
-
-void __init plat_time_init(void)
-{
- of_clk_init(NULL);
- timer_probe();
-}
-
-void __init prom_init(void)
-{
- fw_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-static void jz4740_wait_instr(void)
-{
- __asm__(".set push;\n"
- ".set mips3;\n"
- "wait;\n"
- ".set pop;\n"
- );
-}
-
-static void jz4740_halt(void)
-{
- for (;;)
- jz4740_wait_instr();
-}
-
-static int __maybe_unused jz4740_pm_enter(suspend_state_t state)
-{
- jz4740_wait_instr();
-
- return 0;
-}
-
-static const struct platform_suspend_ops jz4740_pm_ops __maybe_unused = {
- .valid = suspend_valid_only_mem,
- .enter = jz4740_pm_enter,
-};
-
-static int __init jz4740_pm_init(void)
-{
- if (IS_ENABLED(CONFIG_PM_SLEEP))
- suspend_set_ops(&jz4740_pm_ops);
- _machine_halt = jz4740_halt;
-
- return 0;
-
-}
-late_initcall(jz4740_pm_init);
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 13a26d2..2a05b92 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -5,11 +5,17 @@
extra-y := head.o vmlinux.lds
-obj-y += cmpxchg.o cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
+obj-y += branch.o cmpxchg.o elf.o entry.o genex.o idle.o irq.o \
process.o prom.o ptrace.o reset.o setup.o signal.o \
syscall.o time.o topology.o traps.o unaligned.o watch.o \
vdso.o cacheinfo.o
+ifdef CONFIG_CPU_R3K_TLB
+obj-y += cpu-r3k-probe.o
+else
+obj-y += cpu-probe.o
+endif
+
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
@@ -42,6 +48,7 @@
sw-$(CONFIG_CPU_CAVIUM_OCTEON) := octeon_switch.o
obj-y += $(sw-y)
+obj-$(CONFIG_MIPS_FP_SUPPORT) += fpu-probe.o
obj-$(CONFIG_CPU_R2300_FPU) += r2300_fpu.o
obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index fb3e2036..0216ff2 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -20,6 +20,8 @@
#include <asm/ptrace.h>
#include <linux/uaccess.h>
+#include "probes-common.h"
+
/*
* Calculate and return exception PC in case of branch delay slot
* for microMIPS and MIPS16e. It does not clear the ISA mode bit.
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index e2955f1..e685369 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -28,336 +28,14 @@
#include <asm/spram.h>
#include <linux/uaccess.h>
+#include "fpu-probe.h"
+
#include <asm/mach-loongson64/cpucfg-emul.h>
/* Hardware capabilities */
unsigned int elf_hwcap __read_mostly;
EXPORT_SYMBOL_GPL(elf_hwcap);
-#ifdef CONFIG_MIPS_FP_SUPPORT
-
-/*
- * Get the FPU Implementation/Revision.
- */
-static inline unsigned long cpu_get_fpu_id(void)
-{
- unsigned long tmp, fpu_id;
-
- tmp = read_c0_status();
- __enable_fpu(FPU_AS_IS);
- fpu_id = read_32bit_cp1_register(CP1_REVISION);
- write_c0_status(tmp);
- return fpu_id;
-}
-
-/*
- * Check if the CPU has an external FPU.
- */
-static inline int __cpu_has_fpu(void)
-{
- return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
-}
-
-/*
- * Determine the FCSR mask for FPU hardware.
- */
-static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
-{
- unsigned long sr, mask, fcsr, fcsr0, fcsr1;
-
- fcsr = c->fpu_csr31;
- mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
-
- sr = read_c0_status();
- __enable_fpu(FPU_AS_IS);
-
- fcsr0 = fcsr & mask;
- write_32bit_cp1_register(CP1_STATUS, fcsr0);
- fcsr0 = read_32bit_cp1_register(CP1_STATUS);
-
- fcsr1 = fcsr | ~mask;
- write_32bit_cp1_register(CP1_STATUS, fcsr1);
- fcsr1 = read_32bit_cp1_register(CP1_STATUS);
-
- write_32bit_cp1_register(CP1_STATUS, fcsr);
-
- write_c0_status(sr);
-
- c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
-}
-
-/*
- * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
- * supported by FPU hardware.
- */
-static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
-{
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
- MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
- unsigned long sr, fir, fcsr, fcsr0, fcsr1;
-
- sr = read_c0_status();
- __enable_fpu(FPU_AS_IS);
-
- fir = read_32bit_cp1_register(CP1_REVISION);
- if (fir & MIPS_FPIR_HAS2008) {
- fcsr = read_32bit_cp1_register(CP1_STATUS);
-
- /*
- * MAC2008 toolchain never landed in real world, so we're only
- * testing wether it can be disabled and don't try to enabled
- * it.
- */
- fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | FPU_CSR_MAC2008);
- write_32bit_cp1_register(CP1_STATUS, fcsr0);
- fcsr0 = read_32bit_cp1_register(CP1_STATUS);
-
- fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
- write_32bit_cp1_register(CP1_STATUS, fcsr1);
- fcsr1 = read_32bit_cp1_register(CP1_STATUS);
-
- write_32bit_cp1_register(CP1_STATUS, fcsr);
-
- if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2)) {
- /*
- * The bit for MAC2008 might be reused by R6 in future,
- * so we only test for R2-R5.
- */
- if (fcsr0 & FPU_CSR_MAC2008)
- c->options |= MIPS_CPU_MAC_2008_ONLY;
- }
-
- if (!(fcsr0 & FPU_CSR_NAN2008))
- c->options |= MIPS_CPU_NAN_LEGACY;
- if (fcsr1 & FPU_CSR_NAN2008)
- c->options |= MIPS_CPU_NAN_2008;
-
- if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
- c->fpu_msk31 &= ~FPU_CSR_ABS2008;
- else
- c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
-
- if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
- c->fpu_msk31 &= ~FPU_CSR_NAN2008;
- else
- c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
- } else {
- c->options |= MIPS_CPU_NAN_LEGACY;
- }
-
- write_c0_status(sr);
- } else {
- c->options |= MIPS_CPU_NAN_LEGACY;
- }
-}
-
-/*
- * IEEE 754 conformance mode to use. Affects the NaN encoding and the
- * ABS.fmt/NEG.fmt execution mode.
- */
-static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
-
-/*
- * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
- * to support by the FPU emulator according to the IEEE 754 conformance
- * mode selected. Note that "relaxed" straps the emulator so that it
- * allows 2008-NaN binaries even for legacy processors.
- */
-static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
-{
- c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
- c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
- c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
-
- switch (ieee754) {
- case STRICT:
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
- MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
- c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
- } else {
- c->options |= MIPS_CPU_NAN_LEGACY;
- c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
- }
- break;
- case LEGACY:
- c->options |= MIPS_CPU_NAN_LEGACY;
- c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
- break;
- case STD2008:
- c->options |= MIPS_CPU_NAN_2008;
- c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
- c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
- break;
- case RELAXED:
- c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
- break;
- }
-}
-
-/*
- * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
- * according to the "ieee754=" parameter.
- */
-static void cpu_set_nan_2008(struct cpuinfo_mips *c)
-{
- switch (ieee754) {
- case STRICT:
- mips_use_nan_legacy = !!cpu_has_nan_legacy;
- mips_use_nan_2008 = !!cpu_has_nan_2008;
- break;
- case LEGACY:
- mips_use_nan_legacy = !!cpu_has_nan_legacy;
- mips_use_nan_2008 = !cpu_has_nan_legacy;
- break;
- case STD2008:
- mips_use_nan_legacy = !cpu_has_nan_2008;
- mips_use_nan_2008 = !!cpu_has_nan_2008;
- break;
- case RELAXED:
- mips_use_nan_legacy = true;
- mips_use_nan_2008 = true;
- break;
- }
-}
-
-/*
- * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
- * settings:
- *
- * strict: accept binaries that request a NaN encoding supported by the FPU
- * legacy: only accept legacy-NaN binaries
- * 2008: only accept 2008-NaN binaries
- * relaxed: accept any binaries regardless of whether supported by the FPU
- */
-static int __init ieee754_setup(char *s)
-{
- if (!s)
- return -1;
- else if (!strcmp(s, "strict"))
- ieee754 = STRICT;
- else if (!strcmp(s, "legacy"))
- ieee754 = LEGACY;
- else if (!strcmp(s, "2008"))
- ieee754 = STD2008;
- else if (!strcmp(s, "relaxed"))
- ieee754 = RELAXED;
- else
- return -1;
-
- if (!(boot_cpu_data.options & MIPS_CPU_FPU))
- cpu_set_nofpu_2008(&boot_cpu_data);
- cpu_set_nan_2008(&boot_cpu_data);
-
- return 0;
-}
-
-early_param("ieee754", ieee754_setup);
-
-/*
- * Set the FIR feature flags for the FPU emulator.
- */
-static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
-{
- u32 value;
-
- value = 0;
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
- MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
- value |= MIPS_FPIR_D | MIPS_FPIR_S;
- if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
- MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
- value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
- if (c->options & MIPS_CPU_NAN_2008)
- value |= MIPS_FPIR_HAS2008;
- c->fpu_id = value;
-}
-
-/* Determined FPU emulator mask to use for the boot CPU with "nofpu". */
-static unsigned int mips_nofpu_msk31;
-
-/*
- * Set options for FPU hardware.
- */
-static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
-{
- c->fpu_id = cpu_get_fpu_id();
- mips_nofpu_msk31 = c->fpu_msk31;
-
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
- MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
- if (c->fpu_id & MIPS_FPIR_3D)
- c->ases |= MIPS_ASE_MIPS3D;
- if (c->fpu_id & MIPS_FPIR_UFRP)
- c->options |= MIPS_CPU_UFR;
- if (c->fpu_id & MIPS_FPIR_FREP)
- c->options |= MIPS_CPU_FRE;
- }
-
- cpu_set_fpu_fcsr_mask(c);
- cpu_set_fpu_2008(c);
- cpu_set_nan_2008(c);
-}
-
-/*
- * Set options for the FPU emulator.
- */
-static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
-{
- c->options &= ~MIPS_CPU_FPU;
- c->fpu_msk31 = mips_nofpu_msk31;
-
- cpu_set_nofpu_2008(c);
- cpu_set_nan_2008(c);
- cpu_set_nofpu_id(c);
-}
-
-static int mips_fpu_disabled;
-
-static int __init fpu_disable(char *s)
-{
- cpu_set_nofpu_opts(&boot_cpu_data);
- mips_fpu_disabled = 1;
-
- return 1;
-}
-
-__setup("nofpu", fpu_disable);
-
-#else /* !CONFIG_MIPS_FP_SUPPORT */
-
-#define mips_fpu_disabled 1
-
-static inline unsigned long cpu_get_fpu_id(void)
-{
- return FPIR_IMP_NONE;
-}
-
-static inline int __cpu_has_fpu(void)
-{
- return 0;
-}
-
-static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
-{
- /* no-op */
-}
-
-static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
-{
- /* no-op */
-}
-
-#endif /* CONFIG_MIPS_FP_SUPPORT */
-
static inline unsigned long cpu_get_msa_id(void)
{
unsigned long status, msa_id;
@@ -1600,8 +1278,9 @@
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
+ MIPS_CPU_LLSC;
c->tlbsize = 64;
+ write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
break;
case PRID_IMP_R14000:
if (((c->processor_id >> 4) & 0x0f) > 2) {
@@ -1615,8 +1294,9 @@
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
+ MIPS_CPU_LLSC;
c->tlbsize = 64;
+ write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
break;
case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
switch (c->processor_id & PRID_REV_MASK) {
@@ -2123,7 +1803,10 @@
/* XBurst does not implement the CP0 counter. */
c->options &= ~MIPS_CPU_COUNTER;
- BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
+ BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter);
+
+ /* XBurst has virtually tagged icache */
+ c->icache.flags |= MIPS_CACHE_VTAG;
switch (c->processor_id & PRID_IMP_MASK) {
@@ -2169,8 +1852,9 @@
/* XBurst®1 with MXU2.0 SIMD ISA */
case PRID_IMP_XBURST_REV2:
+ /* Ingenic uses the WA bit to achieve write-combine memory writes */
+ c->writecombine = _CACHE_CACHABLE_WA;
c->cputype = CPU_XBURST;
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
__cpu_name[cpu] = "Ingenic XBurst";
break;
@@ -2372,10 +2056,6 @@
else
cpu_set_nofpu_opts(c);
- if (cpu_has_bp_ghist)
- write_c0_r10k_diag(read_c0_r10k_diag() |
- R10K_DIAG_E_GHIST);
-
if (cpu_has_mips_r2_r6) {
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
/* R2 has Performance Counter Interrupt indicator */
diff --git a/arch/mips/kernel/cpu-r3k-probe.c b/arch/mips/kernel/cpu-r3k-probe.c
new file mode 100644
index 0000000..abdbbe8
--- /dev/null
+++ b/arch/mips/kernel/cpu-r3k-probe.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Processor capabilities determination functions.
+ *
+ * Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/export.h>
+
+#include <asm/bugs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/elf.h>
+
+#include "fpu-probe.h"
+
+/* Hardware capabilities */
+unsigned int elf_hwcap __read_mostly;
+EXPORT_SYMBOL_GPL(elf_hwcap);
+
+void __init check_bugs32(void)
+{
+
+}
+
+/*
+ * Probe whether cpu has config register by trying to play with
+ * alternate cache bit and see whether it matters.
+ * It's used by cpu_probe to distinguish between R3000A and R3081.
+ */
+static inline int cpu_has_confreg(void)
+{
+#ifdef CONFIG_CPU_R3000
+ extern unsigned long r3k_cache_size(unsigned long);
+ unsigned long size1, size2;
+ unsigned long cfg = read_c0_conf();
+
+ size1 = r3k_cache_size(ST0_ISC);
+ write_c0_conf(cfg ^ R30XX_CONF_AC);
+ size2 = r3k_cache_size(ST0_ISC);
+ write_c0_conf(cfg);
+ return size1 != size2;
+#else
+ return 0;
+#endif
+}
+
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+ if (cpu == 0)
+ __elf_platform = plat;
+}
+
+const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
+const char *__elf_base_platform;
+
+void cpu_probe(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+ unsigned int cpu = smp_processor_id();
+
+ /*
+ * Set a default elf platform, cpu probe may later
+ * overwrite it with a more precise value
+ */
+ set_elf_platform(cpu, "mips");
+
+ c->processor_id = PRID_IMP_UNKNOWN;
+ c->fpu_id = FPIR_IMP_NONE;
+ c->cputype = CPU_UNKNOWN;
+ c->writecombine = _CACHE_UNCACHED;
+
+ c->fpu_csr31 = FPU_CSR_RN;
+ c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008 |
+ FPU_CSR_CONDX | FPU_CSR_FS;
+
+ c->srsets = 1;
+
+ c->processor_id = read_c0_prid();
+ switch (c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) {
+ case PRID_COMP_LEGACY | PRID_IMP_R2000:
+ c->cputype = CPU_R2000;
+ __cpu_name[cpu] = "R2000";
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
+ if (__cpu_has_fpu())
+ c->options |= MIPS_CPU_FPU;
+ c->tlbsize = 64;
+ break;
+ case PRID_COMP_LEGACY | PRID_IMP_R3000:
+ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
+ if (cpu_has_confreg()) {
+ c->cputype = CPU_R3081E;
+ __cpu_name[cpu] = "R3081";
+ } else {
+ c->cputype = CPU_R3000A;
+ __cpu_name[cpu] = "R3000A";
+ }
+ } else {
+ c->cputype = CPU_R3000;
+ __cpu_name[cpu] = "R3000";
+ }
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
+ if (__cpu_has_fpu())
+ c->options |= MIPS_CPU_FPU;
+ c->tlbsize = 64;
+ break;
+ case PRID_COMP_LEGACY | PRID_IMP_TX39:
+ c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
+
+ if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
+ c->cputype = CPU_TX3927;
+ __cpu_name[cpu] = "TX3927";
+ c->tlbsize = 64;
+ } else {
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_TX3912:
+ c->cputype = CPU_TX3912;
+ __cpu_name[cpu] = "TX3912";
+ c->tlbsize = 32;
+ break;
+ case PRID_REV_TX3922:
+ c->cputype = CPU_TX3922;
+ __cpu_name[cpu] = "TX3922";
+ c->tlbsize = 64;
+ break;
+ }
+ }
+ break;
+ }
+
+ BUG_ON(!__cpu_name[cpu]);
+ BUG_ON(c->cputype == CPU_UNKNOWN);
+
+ /*
+ * Platform code can force the cpu type to optimize code
+ * generation. In that case be sure the cpu type is correctly
+ * manually setup otherwise it could trigger some nasty bugs.
+ */
+ BUG_ON(current_cpu_type() != c->cputype);
+
+ if (mips_fpu_disabled)
+ c->options &= ~MIPS_CPU_FPU;
+
+ if (c->options & MIPS_CPU_FPU)
+ cpu_set_fpu_opts(c);
+ else
+ cpu_set_nofpu_opts(c);
+}
+
+void cpu_report(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ pr_info("CPU%d revision is: %08x (%s)\n",
+ smp_processor_id(), c->processor_id, cpu_name_string());
+ if (c->options & MIPS_CPU_FPU)
+ pr_info("FPU revision is: %08x\n", c->fpu_id);
+}
diff --git a/arch/mips/kernel/fpu-probe.c b/arch/mips/kernel/fpu-probe.c
new file mode 100644
index 0000000..e689d6a
--- /dev/null
+++ b/arch/mips/kernel/fpu-probe.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Processor capabilities determination functions.
+ *
+ * Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/bugs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/elf.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+
+#include "fpu-probe.h"
+
+/*
+ * Get the FPU Implementation/Revision.
+ */
+static inline unsigned long cpu_get_fpu_id(void)
+{
+ unsigned long tmp, fpu_id;
+
+ tmp = read_c0_status();
+ __enable_fpu(FPU_AS_IS);
+ fpu_id = read_32bit_cp1_register(CP1_REVISION);
+ write_c0_status(tmp);
+ return fpu_id;
+}
+
+/*
+ * Check if the CPU has an external FPU.
+ */
+int __cpu_has_fpu(void)
+{
+ return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
+}
+
+/*
+ * Determine the FCSR mask for FPU hardware.
+ */
+static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
+{
+ unsigned long sr, mask, fcsr, fcsr0, fcsr1;
+
+ fcsr = c->fpu_csr31;
+ mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
+
+ sr = read_c0_status();
+ __enable_fpu(FPU_AS_IS);
+
+ fcsr0 = fcsr & mask;
+ write_32bit_cp1_register(CP1_STATUS, fcsr0);
+ fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+ fcsr1 = fcsr | ~mask;
+ write_32bit_cp1_register(CP1_STATUS, fcsr1);
+ fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+ write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+ write_c0_status(sr);
+
+ c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
+}
+
+/*
+ * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
+ * supported by FPU hardware.
+ */
+static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
+{
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+ unsigned long sr, fir, fcsr, fcsr0, fcsr1;
+
+ sr = read_c0_status();
+ __enable_fpu(FPU_AS_IS);
+
+ fir = read_32bit_cp1_register(CP1_REVISION);
+ if (fir & MIPS_FPIR_HAS2008) {
+ fcsr = read_32bit_cp1_register(CP1_STATUS);
+
+ /*
+ * MAC2008 toolchain never landed in real world, so
+ * we're only testing whether it can be disabled and
+ * don't try to enabled it.
+ */
+ fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 |
+ FPU_CSR_MAC2008);
+ write_32bit_cp1_register(CP1_STATUS, fcsr0);
+ fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+ fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ write_32bit_cp1_register(CP1_STATUS, fcsr1);
+ fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+ write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+ if (c->isa_level & (MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R2)) {
+ /*
+ * The bit for MAC2008 might be reused by R6
+ * in future, so we only test for R2-R5.
+ */
+ if (fcsr0 & FPU_CSR_MAC2008)
+ c->options |= MIPS_CPU_MAC_2008_ONLY;
+ }
+
+ if (!(fcsr0 & FPU_CSR_NAN2008))
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ if (fcsr1 & FPU_CSR_NAN2008)
+ c->options |= MIPS_CPU_NAN_2008;
+
+ if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
+ c->fpu_msk31 &= ~FPU_CSR_ABS2008;
+ else
+ c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
+
+ if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
+ c->fpu_msk31 &= ~FPU_CSR_NAN2008;
+ else
+ c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ }
+
+ write_c0_status(sr);
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ }
+}
+
+/*
+ * IEEE 754 conformance mode to use. Affects the NaN encoding and the
+ * ABS.fmt/NEG.fmt execution mode.
+ */
+static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
+
+/*
+ * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
+ * to support by the FPU emulator according to the IEEE 754 conformance
+ * mode selected. Note that "relaxed" straps the emulator so that it
+ * allows 2008-NaN binaries even for legacy processors.
+ */
+static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
+{
+ c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
+ c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+ c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+
+ switch (ieee754) {
+ case STRICT:
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+ c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ }
+ break;
+ case LEGACY:
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ break;
+ case STD2008:
+ c->options |= MIPS_CPU_NAN_2008;
+ c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ break;
+ case RELAXED:
+ c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+ break;
+ }
+}
+
+/*
+ * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * according to the "ieee754=" parameter.
+ */
+static void cpu_set_nan_2008(struct cpuinfo_mips *c)
+{
+ switch (ieee754) {
+ case STRICT:
+ mips_use_nan_legacy = !!cpu_has_nan_legacy;
+ mips_use_nan_2008 = !!cpu_has_nan_2008;
+ break;
+ case LEGACY:
+ mips_use_nan_legacy = !!cpu_has_nan_legacy;
+ mips_use_nan_2008 = !cpu_has_nan_legacy;
+ break;
+ case STD2008:
+ mips_use_nan_legacy = !cpu_has_nan_2008;
+ mips_use_nan_2008 = !!cpu_has_nan_2008;
+ break;
+ case RELAXED:
+ mips_use_nan_legacy = true;
+ mips_use_nan_2008 = true;
+ break;
+ }
+}
+
+/*
+ * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
+ * settings:
+ *
+ * strict: accept binaries that request a NaN encoding supported by the FPU
+ * legacy: only accept legacy-NaN binaries
+ * 2008: only accept 2008-NaN binaries
+ * relaxed: accept any binaries regardless of whether supported by the FPU
+ */
+static int __init ieee754_setup(char *s)
+{
+ if (!s)
+ return -1;
+ else if (!strcmp(s, "strict"))
+ ieee754 = STRICT;
+ else if (!strcmp(s, "legacy"))
+ ieee754 = LEGACY;
+ else if (!strcmp(s, "2008"))
+ ieee754 = STD2008;
+ else if (!strcmp(s, "relaxed"))
+ ieee754 = RELAXED;
+ else
+ return -1;
+
+ if (!(boot_cpu_data.options & MIPS_CPU_FPU))
+ cpu_set_nofpu_2008(&boot_cpu_data);
+ cpu_set_nan_2008(&boot_cpu_data);
+
+ return 0;
+}
+
+early_param("ieee754", ieee754_setup);
+
+/*
+ * Set the FIR feature flags for the FPU emulator.
+ */
+static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
+{
+ u32 value;
+
+ value = 0;
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+ value |= MIPS_FPIR_D | MIPS_FPIR_S;
+ if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+ value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+ if (c->options & MIPS_CPU_NAN_2008)
+ value |= MIPS_FPIR_HAS2008;
+ c->fpu_id = value;
+}
+
+/* Determined FPU emulator mask to use for the boot CPU with "nofpu". */
+static unsigned int mips_nofpu_msk31;
+
+/*
+ * Set options for FPU hardware.
+ */
+void cpu_set_fpu_opts(struct cpuinfo_mips *c)
+{
+ c->fpu_id = cpu_get_fpu_id();
+ mips_nofpu_msk31 = c->fpu_msk31;
+
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+ if (c->fpu_id & MIPS_FPIR_3D)
+ c->ases |= MIPS_ASE_MIPS3D;
+ if (c->fpu_id & MIPS_FPIR_UFRP)
+ c->options |= MIPS_CPU_UFR;
+ if (c->fpu_id & MIPS_FPIR_FREP)
+ c->options |= MIPS_CPU_FRE;
+ }
+
+ cpu_set_fpu_fcsr_mask(c);
+ cpu_set_fpu_2008(c);
+ cpu_set_nan_2008(c);
+}
+
+/*
+ * Set options for the FPU emulator.
+ */
+void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
+{
+ c->options &= ~MIPS_CPU_FPU;
+ c->fpu_msk31 = mips_nofpu_msk31;
+
+ cpu_set_nofpu_2008(c);
+ cpu_set_nan_2008(c);
+ cpu_set_nofpu_id(c);
+}
+
+int mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+ cpu_set_nofpu_opts(&boot_cpu_data);
+ mips_fpu_disabled = 1;
+
+ return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
diff --git a/arch/mips/kernel/fpu-probe.h b/arch/mips/kernel/fpu-probe.h
new file mode 100644
index 0000000..951ce50
--- /dev/null
+++ b/arch/mips/kernel/fpu-probe.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+
+#ifdef CONFIG_MIPS_FP_SUPPORT
+
+extern int mips_fpu_disabled;
+
+int __cpu_has_fpu(void);
+void cpu_set_fpu_opts(struct cpuinfo_mips *c);
+void cpu_set_nofpu_opts(struct cpuinfo_mips *c);
+
+#else /* !CONFIG_MIPS_FP_SUPPORT */
+
+#define mips_fpu_disabled 1
+
+static inline unsigned long cpu_get_fpu_id(void)
+{
+ return FPIR_IMP_NONE;
+}
+
+static inline int __cpu_has_fpu(void)
+{
+ return 0;
+}
+
+static inline void cpu_set_fpu_opts(struct cpuinfo_mips *c)
+{
+ /* no-op */
+}
+
+static inline void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
+{
+ /* no-op */
+}
+
+#endif /* CONFIG_MIPS_FP_SUPPORT */
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 2625232..f57e68f 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -37,10 +37,6 @@
ftrace_modify_all_code(command);
}
-#endif
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
#define JUMP_RANGE_MASK ((1UL << 28) - 1)
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 7dd234e..61b7358 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -35,7 +35,7 @@
.macro setup_c0_status set clr
.set push
mfc0 t0, CP0_STATUS
- or t0, ST0_CU0|\set|0x1f|\clr
+ or t0, ST0_KERNEL_CUMASK|\set|0x1f|\clr
xor t0, 0x1f|\clr
mtc0 t0, CP0_STATUS
.set noreorder
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 1a08428..6c590ef2 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -167,7 +167,7 @@
return -EINVAL;
get_online_cpus();
- read_lock(&tasklist_lock);
+ rcu_read_lock();
retval = -ESRCH;
p = find_process_by_pid(pid);
@@ -181,7 +181,7 @@
cpumask_and(&mask, &allowed, cpu_active_mask);
out_unlock:
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
put_online_cpus();
if (retval)
return retval;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index f5dc316..75ebd8d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -52,6 +52,7 @@
#include <asm/inst.h>
#include <asm/stacktrace.h>
#include <asm/irq_regs.h>
+#include <asm/exec.h>
#ifdef CONFIG_HOTPLUG_CPU
void arch_cpu_idle_dead(void)
@@ -68,7 +69,7 @@
unsigned long status;
/* New thread loses kernel privileges. */
- status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
+ status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_CU2|ST0_FR|KU_MASK);
status |= KU_USER;
regs->cp0_status = status;
lose_fpu(0);
@@ -133,7 +134,7 @@
childregs = (struct pt_regs *) childksp - 1;
/* Put the stack after the struct pt_regs. */
childksp = (unsigned long) childregs;
- p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
+ p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
if (unlikely(p->flags & PF_KTHREAD)) {
/* kernel thread */
unsigned long status = p->thread.cp0_status;
@@ -279,7 +280,21 @@
*poff = ip->i_format.simmediate / sizeof(ulong);
return 1;
}
-
+#ifdef CONFIG_CPU_LOONGSON64
+ if ((ip->loongson3_lswc2_format.opcode == swc2_op) &&
+ (ip->loongson3_lswc2_format.ls == 1) &&
+ (ip->loongson3_lswc2_format.fr == 0) &&
+ (ip->loongson3_lswc2_format.base == 29)) {
+ if (ip->loongson3_lswc2_format.rt == 31) {
+ *poff = ip->loongson3_lswc2_format.offset << 1;
+ return 1;
+ }
+ if (ip->loongson3_lswc2_format.rq == 31) {
+ *poff = (ip->loongson3_lswc2_format.offset << 1) + 1;
+ return 1;
+ }
+ }
+#endif
return 0;
#endif
}
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 9e50dc8..6abebd5 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -36,31 +36,6 @@
}
#ifdef CONFIG_USE_OF
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
- if (base >= PHYS_ADDR_MAX) {
- pr_warn("Trying to add an invalid memory region, skipped\n");
- return;
- }
-
- /* Truncate the passed memory region instead of type casting */
- if (base + size - 1 >= PHYS_ADDR_MAX || base + size < base) {
- pr_warn("Truncate memory region %llx @ %llx to size %llx\n",
- size, base, PHYS_ADDR_MAX - base);
- size = PHYS_ADDR_MAX - base;
- }
-
- add_memory_region(base, size, BOOT_MEM_RAM);
-}
-
-int __init early_init_dt_reserve_memory_arch(phys_addr_t base,
- phys_addr_t size, bool nomap)
-{
- add_memory_region(base, size,
- nomap ? BOOT_MEM_NOMAP : BOOT_MEM_RESERVED);
-
- return 0;
-}
void __init __dt_setup_arch(void *bph)
{
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index ee8636c..fccdbe2 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -91,45 +91,6 @@
EXPORT_SYMBOL(ARCH_PFN_OFFSET);
#endif
-void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
-{
- /*
- * Note: This function only exists for historical reason,
- * new code should use memblock_add or memblock_add_node instead.
- */
-
- /*
- * If the region reaches the top of the physical address space, adjust
- * the size slightly so that (start + size) doesn't overflow
- */
- if (start + size - 1 == PHYS_ADDR_MAX)
- --size;
-
- /* Sanity check */
- if (start + size < start) {
- pr_warn("Trying to add an invalid memory region, skipped\n");
- return;
- }
-
- if (start < PHYS_OFFSET)
- return;
-
- memblock_add(start, size);
- /* Reserve any memory except the ordinary RAM ranges. */
- switch (type) {
- case BOOT_MEM_RAM:
- break;
-
- case BOOT_MEM_NOMAP: /* Discard the range from the system. */
- memblock_remove(start, size);
- break;
-
- default: /* Reserve the rest of the memory types at boot time */
- memblock_reserve(start, size);
- break;
- }
-}
-
void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
{
void *dm = &detect_magic;
@@ -146,7 +107,7 @@
((unsigned long long) sz_min) / SZ_1M,
((unsigned long long) sz_max) / SZ_1M);
- add_memory_region(start, size, BOOT_MEM_RAM);
+ memblock_add(start, size);
}
/*
@@ -396,7 +357,7 @@
if (*p == '@')
start = memparse(p + 1, &p);
- add_memory_region(start, size, BOOT_MEM_RAM);
+ memblock_add(start, size);
return 0;
}
@@ -422,13 +383,14 @@
if (*p == '@') {
start_at = memparse(p+1, &p);
- add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
+ memblock_add(start_at, mem_size);
} else if (*p == '#') {
pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n");
return -EINVAL;
} else if (*p == '$') {
start_at = memparse(p+1, &p);
- add_memory_region(start_at, mem_size, BOOT_MEM_RESERVED);
+ memblock_add(start_at, mem_size);
+ memblock_reserve(start_at, mem_size);
} else {
pr_err("\"memmap\" invalid format!\n");
return -EINVAL;
@@ -443,7 +405,7 @@
early_param("memmap", early_parse_memmap);
#ifdef CONFIG_PROC_VMCORE
-unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
+static unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
static int __init early_parse_elfcorehdr(char *p)
{
phys_addr_t start, end;
@@ -472,6 +434,11 @@
#endif
#ifdef CONFIG_KEXEC
+
+/* 64M alignment for crash kernel regions */
+#define CRASH_ALIGN SZ_64M
+#define CRASH_ADDR_MAX SZ_512M
+
static void __init mips_parse_crashkernel(void)
{
unsigned long long total_mem;
@@ -484,9 +451,22 @@
if (ret != 0 || crash_size <= 0)
return;
- if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 1)) {
- pr_warn("Invalid memory region reserved for crash kernel\n");
- return;
+ if (crash_base <= 0) {
+ crash_base = memblock_find_in_range(CRASH_ALIGN, CRASH_ADDR_MAX,
+ crash_size, CRASH_ALIGN);
+ if (!crash_base) {
+ pr_warn("crashkernel reservation failed - No suitable area found.\n");
+ return;
+ }
+ } else {
+ unsigned long long start;
+
+ start = memblock_find_in_range(crash_base, crash_base + crash_size,
+ crash_size, 1);
+ if (start != crash_base) {
+ pr_warn("Invalid memory region reserved for crash kernel\n");
+ return;
+ }
}
crashk_res.start = crash_base;
@@ -621,7 +601,7 @@
* arch_mem_init - initialize memory management subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
- * memory areas using add_memory_region.
+ * memory areas using memblock_add.
*
* At this stage the memory configuration of the system is known to the
* kernel but generic memory management system is still entirely uninitialized.
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index a026272..f442650 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -545,6 +545,12 @@
return err ?: protected_restore_fp_context(sc);
}
+#ifdef CONFIG_WAR_ICACHE_REFILLS
+#define SIGMASK ~(cpu_icache_line_size()-1)
+#else
+#define SIGMASK ALMASK
+#endif
+
void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
size_t frame_size)
{
@@ -565,7 +571,7 @@
sp = sigsp(sp, ksig);
- return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
+ return (void __user *)((sp - frame_size) & SIGMASK);
}
/*
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index c333e57..2afa3ee 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -106,7 +106,7 @@
if (unlikely(!access_ok((const void __user *)addr, 4)))
return -EINVAL;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
+ if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
__asm__ __volatile__ (
" .set push \n"
" .set arch=r4000 \n"
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cf788591..e035295 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2204,7 +2204,7 @@
* flag that some firmware may have left set and the TS bit (for
* IP27). Set XX for ISA IV code to work.
*/
- unsigned int status_set = ST0_CU0;
+ unsigned int status_set = ST0_KERNEL_CUMASK;
#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index b103420..917fac1 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -112,11 +112,15 @@
#define PMU_PPE_DP BIT(23)
#define PMU_PPE_DPLUS BIT(24)
#define PMU_USB1_P BIT(26)
+#define PMU_GPHY3 BIT(26) /* grx390 */
#define PMU_USB1 BIT(27)
#define PMU_SWITCH BIT(28)
#define PMU_PPE_TOP BIT(29)
+#define PMU_GPHY0 BIT(29) /* ar10, xrx390 */
#define PMU_GPHY BIT(30)
+#define PMU_GPHY1 BIT(30) /* ar10, xrx390 */
#define PMU_PCIE_CLK BIT(31)
+#define PMU_GPHY2 BIT(31) /* ar10, xrx390 */
#define PMU1_PCIE_PHY BIT(0) /* vr9-specific,moved in ar10/grx390 */
#define PMU1_PCIE_CTL BIT(1)
@@ -465,6 +469,9 @@
if (of_machine_is_compatible("lantiq,grx390") ||
of_machine_is_compatible("lantiq,ar10")) {
+ clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0);
+ clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1);
+ clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2);
clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P);
clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P);
/* rc 0 */
@@ -496,6 +503,7 @@
} else if (of_machine_is_compatible("lantiq,grx390")) {
clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
+ clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3);
clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
/* rc 2 */
@@ -514,8 +522,6 @@
clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
PMU_PPE_DP | PMU_PPE_TC);
clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/arch/mips/loongson2ef/common/mem.c b/arch/mips/loongson2ef/common/mem.c
index ae21f1c..057d58b 100644
--- a/arch/mips/loongson2ef/common/mem.c
+++ b/arch/mips/loongson2ef/common/mem.c
@@ -17,10 +17,7 @@
void __init prom_init_memory(void)
{
- add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-
- add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
- 20), BOOT_MEM_RESERVED);
+ memblock_add(0x0, (memsize << 20));
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
{
@@ -41,12 +38,7 @@
#ifdef CONFIG_64BIT
if (highmemsize > 0)
- add_memory_region(LOONGSON_HIGHMEM_START,
- highmemsize << 20, BOOT_MEM_RAM);
-
- add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
- LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
-
+ memblock_add(LOONGSON_HIGHMEM_START, highmemsize << 20);
#endif /* !CONFIG_64BIT */
}
diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c
index fd76114..c133b5a 100644
--- a/arch/mips/loongson32/common/prom.c
+++ b/arch/mips/loongson32/common/prom.c
@@ -7,8 +7,8 @@
#include <linux/io.h>
#include <linux/init.h>
+#include <linux/memblock.h>
#include <linux/serial_reg.h>
-#include <asm/bootinfo.h>
#include <asm/fw/fw.h>
#include <loongson1.h>
@@ -42,5 +42,5 @@
void __init plat_mem_setup(void)
{
- add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+ memblock_add(0x0, (memsize << 20));
}
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index ea8bb1b..cf9459f 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -98,27 +98,6 @@
}
}
-static unsigned long nid_to_addroffset(unsigned int nid)
-{
- unsigned long result;
- switch (nid) {
- case 0:
- default:
- result = NODE0_ADDRSPACE_OFFSET;
- break;
- case 1:
- result = NODE1_ADDRSPACE_OFFSET;
- break;
- case 2:
- result = NODE2_ADDRSPACE_OFFSET;
- break;
- case 3:
- result = NODE3_ADDRSPACE_OFFSET;
- break;
- }
- return result;
-}
-
static void __init szmem(unsigned int node)
{
u32 i, mem_type;
@@ -146,7 +125,7 @@
pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
start_pfn, end_pfn, num_physpages);
memblock_add_node(PFN_PHYS(start_pfn),
- PFN_PHYS(end_pfn - start_pfn), node);
+ PFN_PHYS(node_psize), node);
break;
case SYSTEM_RAM_HIGH:
start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
@@ -158,7 +137,7 @@
pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
start_pfn, end_pfn, num_physpages);
memblock_add_node(PFN_PHYS(start_pfn),
- PFN_PHYS(end_pfn - start_pfn), node);
+ PFN_PHYS(node_psize), node);
break;
case SYSTEM_RAM_RESERVED:
pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
@@ -175,7 +154,7 @@
unsigned long node_addrspace_offset;
unsigned long start_pfn, end_pfn;
- node_addrspace_offset = nid_to_addroffset(node);
+ node_addrspace_offset = nid_to_addrbase(node);
pr_info("Node%d's addrspace_offset is 0x%lx\n",
node, node_addrspace_offset);
@@ -242,9 +221,7 @@
unsigned long zones_size[MAX_NR_ZONES] = {0, };
pagetable_init();
-#ifdef CONFIG_ZONE_DMA32
zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
-#endif
zones_size[ZONE_NORMAL] = max_low_pfn;
free_area_init(zones_size);
}
diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c
index bc76710..3bb8a1e 100644
--- a/arch/mips/loongson64/reset.c
+++ b/arch/mips/loongson64/reset.c
@@ -15,11 +15,6 @@
#include <loongson.h>
#include <boot_param.h>
-static inline void loongson_reboot(void)
-{
- ((void (*)(void))ioremap(LOONGSON_BOOT_BASE, 4)) ();
-}
-
static void loongson_restart(char *command)
{
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 0ef7170..9cede7c 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -130,9 +130,10 @@
#define R4600_HIT_CACHEOP_WAR_IMPL \
do { \
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) \
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && \
+ cpu_is_r4600_v2_x()) \
*(volatile unsigned long *)CKSEG1; \
- if (R4600_V1_HIT_CACHEOP_WAR) \
+ if (IS_ENABLED(CONFIG_WAR_R4600_V1_HIT_CACHEOP)) \
__asm__ __volatile__("nop;nop;nop;nop"); \
} while (0)
@@ -238,7 +239,7 @@
r4k_blast_dcache = blast_dcache128;
}
-/* force code alignment (used for TX49XX_ICACHE_INDEX_INV_WAR) */
+/* force code alignment (used for CONFIG_WAR_TX49XX_ICACHE_INDEX_INV) */
#define JUMP_TO_ALIGN(order) \
__asm__ __volatile__( \
"b\t1f\n\t" \
@@ -366,10 +367,11 @@
else if (ic_lsize == 16)
r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
else if (ic_lsize == 32) {
- if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V1_INDEX_ICACHEOP) &&
+ cpu_is_r4600_v1_x())
r4k_blast_icache_page_indexed =
blast_icache32_r4600_v1_page_indexed;
- else if (TX49XX_ICACHE_INDEX_INV_WAR)
+ else if (IS_ENABLED(CONFIG_WAR_TX49XX_ICACHE_INDEX_INV))
r4k_blast_icache_page_indexed =
tx49_blast_icache32_page_indexed;
else if (current_cpu_type() == CPU_LOONGSON2EF)
@@ -394,9 +396,10 @@
else if (ic_lsize == 16)
r4k_blast_icache = blast_icache16;
else if (ic_lsize == 32) {
- if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V1_INDEX_ICACHEOP) &&
+ cpu_is_r4600_v1_x())
r4k_blast_icache = blast_r4600_v1_icache32;
- else if (TX49XX_ICACHE_INDEX_INV_WAR)
+ else if (IS_ENABLED(CONFIG_WAR_TX49XX_ICACHE_INDEX_INV))
r4k_blast_icache = tx49_blast_icache32;
else if (current_cpu_type() == CPU_LOONGSON2EF)
r4k_blast_icache = loongson2_blast_icache32;
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index cd805b0..504bc40 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -250,14 +250,16 @@
if (cpu_has_cache_cdex_s) {
uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
} else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ if (IS_ENABLED(CONFIG_WAR_R4600_V1_HIT_CACHEOP) &&
+ cpu_is_r4600_v1_x()) {
uasm_i_nop(buf);
uasm_i_nop(buf);
uasm_i_nop(buf);
uasm_i_nop(buf);
}
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) &&
+ cpu_is_r4600_v2_x())
uasm_i_lw(buf, ZERO, ZERO, AT);
uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
@@ -302,7 +304,7 @@
else
uasm_i_ori(&buf, A2, A0, off);
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000));
off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
@@ -402,14 +404,16 @@
if (cpu_has_cache_cdex_s) {
uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
} else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ if (IS_ENABLED(CONFIG_WAR_R4600_V1_HIT_CACHEOP) &&
+ cpu_is_r4600_v1_x()) {
uasm_i_nop(buf);
uasm_i_nop(buf);
uasm_i_nop(buf);
uasm_i_nop(buf);
}
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) &&
+ cpu_is_r4600_v2_x())
uasm_i_lw(buf, ZERO, ZERO, AT);
uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
@@ -453,7 +457,7 @@
else
uasm_i_ori(&buf, A2, A0, off);
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000));
off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 97dc051..dd0a5be 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -228,6 +228,7 @@
* contradicted by all documentation.
*/
case MACH_INGENIC_JZ4770:
+ case MACH_INGENIC_JZ4775:
c->scache.ways = 4;
break;
@@ -236,6 +237,7 @@
* but that is contradicted by all documentation.
*/
case MACH_INGENIC_X1000:
+ case MACH_INGENIC_X1000E:
c->scache.sets = 256;
c->scache.ways = 4;
break;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 14f8ba9..a7521b8 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -83,14 +83,18 @@
return 0;
}
+extern int sb1250_m3_workaround_needed(void);
+
static inline int __maybe_unused bcm1250_m3_war(void)
{
- return BCM1250_M3_WAR;
+ if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS))
+ return sb1250_m3_workaround_needed();
+ return 0;
}
static inline int __maybe_unused r10000_llsc_war(void)
{
- return R10000_LLSC_WAR;
+ return IS_ENABLED(CONFIG_WAR_R10000_LLSC);
}
static int use_bbit_insns(void)
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index c56f129..81dd226 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -394,7 +394,7 @@
void uasm_i_pref(u32 **buf, unsigned int a, signed int b,
unsigned int c)
{
- if (CAVIUM_OCTEON_DCACHE_PREFETCH_WAR && a <= 24 && a != 5)
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) && a <= 24 && a != 5)
/*
* As per erratum Core-14449, replace prefetches 0-4,
* 6-24 with 'pref 28'.
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index c4ad5a9..e1fb8b5 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -16,7 +16,6 @@
#include <asm/dma-coherence.h>
#include <asm/fw/fw.h>
-#include <asm/mach-malta/malta-dtshim.h>
#include <asm/mips-cps.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/malta.h>
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 6e3102b..9adc0c1 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -89,7 +89,7 @@
if (map[i] > 0x10000000 && map[i] < 0x20000000)
map[i] = 0x20000000;
- add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM);
+ memblock_add(map[i], map[i+1] - map[i]);
}
}
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 72ceddc..627e881 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -34,6 +34,7 @@
#include <linux/kernel.h>
#include <linux/serial_8250.h>
+#include <linux/memblock.h>
#include <linux/pm.h>
#include <asm/idle.h>
@@ -149,7 +150,7 @@
bootm = (void *)(long)nlm_prom_info.psb_mem_map;
for (i = 0; i < bootm->nr_map; i++) {
- if (bootm->map[i].type != BOOT_MEM_RAM)
+ if (bootm->map[i].type != NLM_BOOT_MEM_RAM)
continue;
start = bootm->map[i].addr;
size = bootm->map[i].size;
@@ -158,7 +159,7 @@
if (i == 0 && start == 0 && size == 0x0c000000)
size = 0x0ff00000;
- add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+ memblock_add(start, size - pref_backup);
}
}
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index cef4a47..0b15730 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -423,9 +423,8 @@
return -EINVAL;
apc->irq = irq;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "ar2315-pci-ctrl");
- apc->mmr_mem = devm_ioremap_resource(dev, res);
+ apc->mmr_mem = devm_platform_ioremap_resource_byname(pdev,
+ "ar2315-pci-ctrl");
if (IS_ERR(apc->mmr_mem))
return PTR_ERR(apc->mmr_mem);
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index a9f8e7c..118760b 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -336,8 +336,8 @@
if (!apc)
return -ENOMEM;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
- apc->cfg_base = devm_ioremap_resource(&pdev->dev, res);
+ apc->cfg_base = devm_platform_ioremap_resource_byname(pdev,
+ "cfg_base");
if (IS_ERR(apc->cfg_base))
return PTR_ERR(apc->cfg_base);
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 869d5c9..807558b 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -372,18 +372,15 @@
if (!apc)
return -ENOMEM;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
- apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ apc->ctrl_base = devm_platform_ioremap_resource_byname(pdev, "ctrl_base");
if (IS_ERR(apc->ctrl_base))
return PTR_ERR(apc->ctrl_base);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
- apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res);
+ apc->devcfg_base = devm_platform_ioremap_resource_byname(pdev, "cfg_base");
if (IS_ERR(apc->devcfg_base))
return PTR_ERR(apc->devcfg_base);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
- apc->crp_base = devm_ioremap_resource(&pdev->dev, res);
+ apc->crp_base = devm_platform_ioremap_resource_byname(pdev, "crp_base");
if (IS_ERR(apc->crp_base))
return PTR_ERR(apc->crp_base);
diff --git a/arch/mips/pnx833x/Makefile b/arch/mips/pnx833x/Makefile
deleted file mode 100644
index 927268a..0000000
--- a/arch/mips/pnx833x/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SOC_PNX833X) += common/
-obj-$(CONFIG_NXP_STB220) += stb22x/
-obj-$(CONFIG_NXP_STB225) += stb22x/
diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform
deleted file mode 100644
index e5286a49..0000000
--- a/arch/mips/pnx833x/Platform
+++ /dev/null
@@ -1,4 +0,0 @@
-# NXP STB225
-cflags-$(CONFIG_SOC_PNX833X) += -I$(srctree)/arch/mips/include/asm/mach-pnx833x
-load-$(CONFIG_NXP_STB220) += 0xffffffff80001000
-load-$(CONFIG_NXP_STB225) += 0xffffffff80001000
diff --git a/arch/mips/pnx833x/common/Makefile b/arch/mips/pnx833x/common/Makefile
deleted file mode 100644
index 9b4d394..0000000
--- a/arch/mips/pnx833x/common/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := interrupts.o platform.o prom.o setup.o reset.o
diff --git a/arch/mips/pnx833x/common/interrupts.c b/arch/mips/pnx833x/common/interrupts.c
deleted file mode 100644
index 2fbbabc..0000000
--- a/arch/mips/pnx833x/common/interrupts.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * interrupts.c: Interrupt mappings for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- */
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/hardirq.h>
-#include <linux/interrupt.h>
-#include <asm/mipsregs.h>
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-#include <irq.h>
-#include <irq-mapping.h>
-#include <gpio.h>
-
-static int mips_cpu_timer_irq;
-
-static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] =
-{
- 0, /* unused */
- 4, /* PNX833X_PIC_I2C0_INT 1 */
- 4, /* PNX833X_PIC_I2C1_INT 2 */
- 1, /* PNX833X_PIC_UART0_INT 3 */
- 1, /* PNX833X_PIC_UART1_INT 4 */
- 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */
- 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */
- 7, /* PNX833X_PIC_GPIO_INT 7 */
- 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */
- 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */
- 4, /* PNX833X_PIC_CONFIG_INT 10 */
- 4, /* PNX833X_PIC_AOI_INT 11 */
- 9, /* PNX833X_PIC_SYNC_INT 12 */
- 9, /* PNX8335_PIC_SATA_INT 13 */
- 4, /* PNX833X_PIC_OSD_INT 14 */
- 9, /* PNX833X_PIC_DISP1_INT 15 */
- 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */
- 9, /* PNX833X_PIC_DISPLAY2_INT 17 */
- 4, /* PNX833X_PIC_VC_INT 18 */
- 4, /* PNX833X_PIC_SC_INT 19 */
- 9, /* PNX833X_PIC_IDE_INT 20 */
- 9, /* PNX833X_PIC_IDE_DMA_INT 21 */
- 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */
- 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */
- 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */
- 4, /* PNX833X_PIC_TS_OUT_INT 25 */
- 4, /* PNX833X_PIC_IR_INT 26 */
- 3, /* PNX833X_PIC_VMSP1_INT 27 */
- 3, /* PNX833X_PIC_VMSP2_INT 28 */
- 4, /* PNX833X_PIC_PIBC_INT 29 */
- 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */
- 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */
- 5, /* PNX833X_PIC_USB_INT 32 */
- 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */
- 4, /* PNX833X_PIC_CLOCK_INT 34 */
- 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */
- 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */
-#if defined(CONFIG_SOC_PNX8335)
- 4, /* PNX8335_PIC_MIU_INT 37 */
- 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */
- 9, /* PNX8335_PIC_SYNC_HD_INT 39 */
- 9, /* PNX8335_PIC_DISP_HD_INT 40 */
- 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */
- 4, /* PNX8335_PIC_OSD_HD1_INT 42 */
- 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */
- 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */
- 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */
- 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */
- 4, /* PNX8335_PIC_DENC_TTX_INT 47 */
- 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */
- 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */
- 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */
- 4, /* PNX8335_PIC_PIBCS_INT 51 */
- 12, /* PNX8335_PIC_ETHERNET_INT 52 */
- 3, /* PNX8335_PIC_VMSP1_0_INT 53 */
- 3, /* PNX8335_PIC_VMSP1_1_INT 54 */
- 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */
- 4, /* PNX8335_PIC_TDGR_DE_INT 56 */
- 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */
-#endif
-};
-
-static void pnx833x_timer_dispatch(void)
-{
- do_IRQ(mips_cpu_timer_irq);
-}
-
-static void pic_dispatch(void)
-{
- unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC);
-
- if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) {
- unsigned long priority = PNX833X_PIC_INT_PRIORITY;
- PNX833X_PIC_INT_PRIORITY = irq_prio[irq];
-
- if (irq == PNX833X_PIC_GPIO_INT) {
- unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE;
- int pin;
- while ((pin = ffs(mask & 0xffff))) {
- pin -= 1;
- do_IRQ(PNX833X_GPIO_IRQ_BASE + pin);
- mask &= ~(1 << pin);
- }
- } else {
- do_IRQ(irq + PNX833X_PIC_IRQ_BASE);
- }
-
- PNX833X_PIC_INT_PRIORITY = priority;
- } else {
- printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq);
- }
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause();
-
- if (pending & STATUSF_IP4)
- pic_dispatch();
- else if (pending & STATUSF_IP7)
- do_IRQ(PNX833X_TIMER_IRQ);
- else
- spurious_interrupt();
-}
-
-static inline void pnx833x_hard_enable_pic_irq(unsigned int irq)
-{
- /* Currently we do this by setting IRQ priority to 1.
- If priority support is being implemented, 1 should be repalced
- by a better value. */
- PNX833X_PIC_INT_REG(irq) = irq_prio[irq];
-}
-
-static inline void pnx833x_hard_disable_pic_irq(unsigned int irq)
-{
- /* Disable IRQ by writing setting it's priority to 0 */
- PNX833X_PIC_INT_REG(irq) = 0;
-}
-
-static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock);
-
-static unsigned int pnx833x_startup_pic_irq(unsigned int irq)
-{
- unsigned long flags;
- unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
-
- raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
- pnx833x_hard_enable_pic_irq(pic_irq);
- raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
- return 0;
-}
-
-static void pnx833x_enable_pic_irq(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int pic_irq = d->irq - PNX833X_PIC_IRQ_BASE;
-
- raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
- pnx833x_hard_enable_pic_irq(pic_irq);
- raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
-}
-
-static void pnx833x_disable_pic_irq(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int pic_irq = d->irq - PNX833X_PIC_IRQ_BASE;
-
- raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
- pnx833x_hard_disable_pic_irq(pic_irq);
- raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
-}
-
-static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
-
-static void pnx833x_enable_gpio_irq(struct irq_data *d)
-{
- int pin = d->irq - PNX833X_GPIO_IRQ_BASE;
- unsigned long flags;
- raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
- pnx833x_gpio_enable_irq(pin);
- raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
-}
-
-static void pnx833x_disable_gpio_irq(struct irq_data *d)
-{
- int pin = d->irq - PNX833X_GPIO_IRQ_BASE;
- unsigned long flags;
- raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
- pnx833x_gpio_disable_irq(pin);
- raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
-}
-
-static int pnx833x_set_type_gpio_irq(struct irq_data *d, unsigned int flow_type)
-{
- int pin = d->irq - PNX833X_GPIO_IRQ_BASE;
- int gpio_mode;
-
- switch (flow_type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_mode = GPIO_INT_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_mode = GPIO_INT_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_mode = GPIO_INT_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_mode = GPIO_INT_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_mode = GPIO_INT_LEVEL_LOW;
- break;
- default:
- gpio_mode = GPIO_INT_NONE;
- break;
- }
-
- pnx833x_gpio_setup_irq(gpio_mode, pin);
-
- return 0;
-}
-
-static struct irq_chip pnx833x_pic_irq_type = {
- .name = "PNX-PIC",
- .irq_enable = pnx833x_enable_pic_irq,
- .irq_disable = pnx833x_disable_pic_irq,
-};
-
-static struct irq_chip pnx833x_gpio_irq_type = {
- .name = "PNX-GPIO",
- .irq_enable = pnx833x_enable_gpio_irq,
- .irq_disable = pnx833x_disable_gpio_irq,
- .irq_set_type = pnx833x_set_type_gpio_irq,
-};
-
-void __init arch_init_irq(void)
-{
- unsigned int irq;
-
- /* setup standard internal cpu irqs */
- mips_cpu_irq_init();
-
- /* Set IRQ information in irq_desc */
- for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) {
- pnx833x_hard_disable_pic_irq(irq);
- irq_set_chip_and_handler(irq, &pnx833x_pic_irq_type,
- handle_simple_irq);
- }
-
- for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++)
- irq_set_chip_and_handler(irq, &pnx833x_gpio_irq_type,
- handle_simple_irq);
-
- /* Set PIC priority limiter register to 0 */
- PNX833X_PIC_INT_PRIORITY = 0;
-
- /* Setup GPIO IRQ dispatching */
- pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT);
-
- /* Enable PIC IRQs (HWIRQ2) */
- if (cpu_has_vint)
- set_vi_handler(4, pic_dispatch);
-
- write_c0_status(read_c0_status() | IE_IRQ2);
-}
-
-unsigned int get_c0_compare_int(void)
-{
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch);
-
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
- return mips_cpu_timer_irq;
-}
-
-void __init plat_time_init(void)
-{
- /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */
-
- extern unsigned long mips_hpt_frequency;
- unsigned long reg = PNX833X_CLOCK_CPUCP_CTL;
-
- if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) {
- /* Functional clock is disabled so use crystal frequency */
- mips_hpt_frequency = 25;
- } else {
-#if defined(CONFIG_SOC_PNX8335)
- /* Functional clock is enabled, so get clock multiplier */
- mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ));
-#else
- static const unsigned long int freq[4] = {240, 160, 120, 80};
- mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)];
-#endif
- }
-
- printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency);
-
- mips_hpt_frequency *= 500000;
-}
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
deleted file mode 100644
index 5fa0373..0000000
--- a/arch/mips/pnx833x/common/platform.c
+++ /dev/null
@@ -1,224 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * platform.c: platform support for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- *
- * Based on software written by:
- * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/mtd/platnand.h>
-
-#include <irq.h>
-#include <irq-mapping.h>
-#include <pnx833x.h>
-
-static u64 uart_dmamask = DMA_BIT_MASK(32);
-
-static struct resource pnx833x_uart_resources[] = {
- [0] = {
- .start = PNX833X_UART0_PORTS_START,
- .end = PNX833X_UART0_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PNX833X_PIC_UART0_INT,
- .end = PNX833X_PIC_UART0_INT,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = PNX833X_UART1_PORTS_START,
- .end = PNX833X_UART1_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = PNX833X_PIC_UART1_INT,
- .end = PNX833X_PIC_UART1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct pnx8xxx_port pnx8xxx_ports[] = {
- [0] = {
- .port = {
- .type = PORT_PNX8XXX,
- .iotype = UPIO_MEM,
- .membase = (void __iomem *)PNX833X_UART0_PORTS_START,
- .mapbase = PNX833X_UART0_PORTS_START,
- .irq = PNX833X_PIC_UART0_INT,
- .uartclk = 3692300,
- .fifosize = 16,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- },
- [1] = {
- .port = {
- .type = PORT_PNX8XXX,
- .iotype = UPIO_MEM,
- .membase = (void __iomem *)PNX833X_UART1_PORTS_START,
- .mapbase = PNX833X_UART1_PORTS_START,
- .irq = PNX833X_PIC_UART1_INT,
- .uartclk = 3692300,
- .fifosize = 16,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- },
-};
-
-static struct platform_device pnx833x_uart_device = {
- .name = "pnx8xxx-uart",
- .id = -1,
- .dev = {
- .dma_mask = &uart_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = pnx8xxx_ports,
- },
- .num_resources = ARRAY_SIZE(pnx833x_uart_resources),
- .resource = pnx833x_uart_resources,
-};
-
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct resource pnx833x_usb_ehci_resources[] = {
- [0] = {
- .start = PNX833X_USB_PORTS_START,
- .end = PNX833X_USB_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PNX833X_PIC_USB_INT,
- .end = PNX833X_PIC_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device pnx833x_usb_ehci_device = {
- .name = "pnx833x-ehci",
- .id = -1,
- .dev = {
- .dma_mask = &ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources),
- .resource = pnx833x_usb_ehci_resources,
-};
-
-static u64 ethernet_dmamask = DMA_BIT_MASK(32);
-
-static struct resource pnx833x_ethernet_resources[] = {
- [0] = {
- .start = PNX8335_IP3902_PORTS_START,
- .end = PNX8335_IP3902_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
-#ifdef CONFIG_SOC_PNX8335
- [1] = {
- .start = PNX8335_PIC_ETHERNET_INT,
- .end = PNX8335_PIC_ETHERNET_INT,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct platform_device pnx833x_ethernet_device = {
- .name = "ip3902-eth",
- .id = -1,
- .dev = {
- .dma_mask = ðernet_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
- .resource = pnx833x_ethernet_resources,
-};
-
-static struct resource pnx833x_sata_resources[] = {
- [0] = {
- .start = PNX8335_SATA_PORTS_START,
- .end = PNX8335_SATA_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PNX8335_PIC_SATA_INT,
- .end = PNX8335_PIC_SATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device pnx833x_sata_device = {
- .name = "pnx833x-sata",
- .id = -1,
- .num_resources = ARRAY_SIZE(pnx833x_sata_resources),
- .resource = pnx833x_sata_resources,
-};
-
-static void
-pnx833x_flash_nand_cmd_ctrl(struct nand_chip *this, int cmd, unsigned int ctrl)
-{
- unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
- else
- writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
-}
-
-static struct platform_nand_data pnx833x_flash_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 25,
- },
- .ctrl = {
- .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl
- }
-};
-
-/*
- * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
- * 12 bytes more seems to be the standard that allows for NAND access.
- */
-static struct resource pnx833x_flash_nand_resource = {
- .start = PNX8335_NAND_BASE,
- .end = PNX8335_NAND_BASE + 12,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pnx833x_flash_nand = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = 1,
- .resource = &pnx833x_flash_nand_resource,
- .dev = {
- .platform_data = &pnx833x_flash_nand_data,
- },
-};
-
-static struct platform_device *pnx833x_platform_devices[] __initdata = {
- &pnx833x_uart_device,
- &pnx833x_usb_ehci_device,
- &pnx833x_ethernet_device,
- &pnx833x_sata_device,
- &pnx833x_flash_nand,
-};
-
-static int __init pnx833x_platform_init(void)
-{
- return platform_add_devices(pnx833x_platform_devices,
- ARRAY_SIZE(pnx833x_platform_devices));
-}
-
-arch_initcall(pnx833x_platform_init);
diff --git a/arch/mips/pnx833x/common/prom.c b/arch/mips/pnx833x/common/prom.c
deleted file mode 100644
index 12733ef..0000000
--- a/arch/mips/pnx833x/common/prom.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * prom.c:
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- *
- * Based on software written by:
- * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-
-void __init prom_init_cmdline(void)
-{
- int argc = fw_arg0;
- char **argv = (char **)fw_arg1;
- char *c = &(arcs_cmdline[0]);
- int i;
-
- for (i = 1; i < argc; i++) {
- strcpy(c, argv[i]);
- c += strlen(argv[i]);
- if (i < argc-1)
- *c++ = ' ';
- }
- *c = 0;
-}
-
-char __init *prom_getenv(char *envname)
-{
- extern char **prom_envp;
- char **env = prom_envp;
- int i;
-
- i = strlen(envname);
-
- while (*env) {
- if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
- return *env + i + 1;
- env++;
- }
-
- return 0;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/pnx833x/common/reset.c b/arch/mips/pnx833x/common/reset.c
deleted file mode 100644
index b48e83b..0000000
--- a/arch/mips/pnx833x/common/reset.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * reset.c: reset support for PNX833X.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- *
- * Based on software written by:
- * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/reboot.h>
-#include <pnx833x.h>
-
-void pnx833x_machine_restart(char *command)
-{
- PNX833X_RESET_CONTROL_2 = 0;
- PNX833X_RESET_CONTROL = 0;
-}
-
-void pnx833x_machine_halt(void)
-{
- while (1)
- __asm__ __volatile__ ("wait");
-
-}
-
-void pnx833x_machine_power_off(void)
-{
- pnx833x_machine_halt();
-}
diff --git a/arch/mips/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c
deleted file mode 100644
index abf68d9..0000000
--- a/arch/mips/pnx833x/common/setup.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * setup.c: Setup PNX833X Soc.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- *
- * Based on software written by:
- * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/pci.h>
-#include <asm/reboot.h>
-#include <pnx833x.h>
-#include <gpio.h>
-
-extern void pnx833x_board_setup(void);
-extern void pnx833x_machine_restart(char *);
-extern void pnx833x_machine_halt(void);
-extern void pnx833x_machine_power_off(void);
-
-int __init plat_mem_setup(void)
-{
- /* set mips clock to 320MHz */
-#if defined(CONFIG_SOC_PNX8335)
- PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ);
-#endif
- pnx833x_gpio_init(); /* so it will be ready in board_setup() */
-
- pnx833x_board_setup();
-
- _machine_restart = pnx833x_machine_restart;
- _machine_halt = pnx833x_machine_halt;
- pm_power_off = pnx833x_machine_power_off;
-
- /* IO/MEM resources. */
- set_io_port_base(KSEG1);
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- return 0;
-}
diff --git a/arch/mips/pnx833x/stb22x/Makefile b/arch/mips/pnx833x/stb22x/Makefile
deleted file mode 100644
index 7c5ddf3..0000000
--- a/arch/mips/pnx833x/stb22x/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := board.o
diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
deleted file mode 100644
index 93d8e7b..0000000
--- a/arch/mips/pnx833x/stb22x/board.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * board.c: STB225 board support.
- *
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@nxp.com>
- * Daniel Laird <daniel.j.laird@nxp.com>
- *
- * Based on software written by:
- * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <linux/mm.h>
-#include <pnx833x.h>
-#include <gpio.h>
-
-/* endianess twiddlers */
-#define PNX8335_DEBUG0 0x4400
-#define PNX8335_DEBUG1 0x4404
-#define PNX8335_DEBUG2 0x4408
-#define PNX8335_DEBUG3 0x440c
-#define PNX8335_DEBUG4 0x4410
-#define PNX8335_DEBUG5 0x4414
-#define PNX8335_DEBUG6 0x4418
-#define PNX8335_DEBUG7 0x441c
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-extern void prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
- return "NXP STB22x";
-}
-
-static inline unsigned long env_or_default(char *env, unsigned long dfl)
-{
- char *str = prom_getenv(env);
- return str ? simple_strtol(str, 0, 0) : dfl;
-}
-
-void __init prom_init(void)
-{
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize = env_or_default("memsize", 0x02000000);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void __init pnx833x_board_setup(void)
-{
- pnx833x_gpio_select_function_alt(4);
- pnx833x_gpio_select_output(4);
- pnx833x_gpio_select_function_alt(5);
- pnx833x_gpio_select_input(5);
- pnx833x_gpio_select_function_alt(6);
- pnx833x_gpio_select_input(6);
- pnx833x_gpio_select_function_alt(7);
- pnx833x_gpio_select_output(7);
-
- pnx833x_gpio_select_function_alt(25);
- pnx833x_gpio_select_function_alt(26);
-
- pnx833x_gpio_select_function_alt(27);
- pnx833x_gpio_select_function_alt(28);
- pnx833x_gpio_select_function_alt(29);
- pnx833x_gpio_select_function_alt(30);
- pnx833x_gpio_select_function_alt(31);
- pnx833x_gpio_select_function_alt(32);
- pnx833x_gpio_select_function_alt(33);
-
-#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
- /* Setup MIU for NAND access on CS0...
- *
- * (it seems that we must also configure CS1 for reliable operation,
- * otherwise the first read ID command will fail if it's read as 4 bytes
- * but pass if it's read as 1 word.)
- */
-
- /* Setup MIU CS0 & CS1 timing */
- PNX833X_MIU_SEL0 = 0;
- PNX833X_MIU_SEL1 = 0;
- PNX833X_MIU_SEL0_TIMING = 0x50003081;
- PNX833X_MIU_SEL1_TIMING = 0x50003081;
-
- /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
- pnx833x_gpio_select_function_alt(0);
-
- /* Setup GPIO 04 to input NAND read/busy signal */
- pnx833x_gpio_select_function_io(4);
- pnx833x_gpio_select_input(4);
-
- /* Setup GPIO 05 to disable NAND write protect */
- pnx833x_gpio_select_function_io(5);
- pnx833x_gpio_select_output(5);
- pnx833x_gpio_write(1, 5);
-
-#elif IS_ENABLED(CONFIG_MTD_CFI)
-
- /* Set up MIU for 16-bit NOR access on CS0 and CS1... */
-
- /* Setup MIU CS0 & CS1 timing */
- PNX833X_MIU_SEL0 = 1;
- PNX833X_MIU_SEL1 = 1;
- PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
- PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
-
- /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
- pnx833x_gpio_select_function_alt(0);
-#endif
-}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 90c6d4a..cbae9d2 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -84,8 +84,7 @@
if (memory_dtb)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
else if (soc_info.mem_size)
- add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
- BOOT_MEM_RAM);
+ memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M);
else
detect_memory_region(soc_info.mem_base,
soc_info.mem_size_min * SZ_1M,
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index 303cc3d..a9d1f20 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -126,5 +126,5 @@
/* give all RAM to boot allocator,
* except for the first 0x400 and the last 0x200 bytes */
- add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+ memblock_add(ddrbase + 0x400, memsize - 0x600);
}
diff --git a/arch/mips/sgi-ip30/ip30-common.h b/arch/mips/sgi-ip30/ip30-common.h
index d2bcaee..7b5db24 100644
--- a/arch/mips/sgi-ip30/ip30-common.h
+++ b/arch/mips/sgi-ip30/ip30-common.h
@@ -3,6 +3,20 @@
#ifndef __IP30_COMMON_H
#define __IP30_COMMON_H
+/*
+ * Power Switch is wired via BaseIO BRIDGE slot #6.
+ *
+ * ACFail is wired via BaseIO BRIDGE slot #7.
+ */
+#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
+
+#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
+#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)
+#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4)
+#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5)
+#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6)
+
+extern void __init ip30_install_ipi(void);
extern struct plat_smp_ops ip30_smp_ops;
extern void __init ip30_per_cpu_init(void);
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
index c2ffcb9..e8374e4 100644
--- a/arch/mips/sgi-ip30/ip30-irq.c
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -14,6 +14,8 @@
#include <asm/irq_cpu.h>
#include <asm/sgi/heart.h>
+#include "ip30-common.h"
+
struct heart_irq_data {
u64 *irq_mask;
int cpu;
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index 62b956c..0f53fed 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -9,6 +9,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <asm/ip32/crime.h>
@@ -36,7 +37,7 @@
printk("CRIME MC: bank %u base 0x%016Lx size %LuMiB\n",
bank, base, size >> 20);
- add_memory_region(base, size, BOOT_MEM_RAM);
+ memblock_add(base, size);
}
}
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 3abd146..8019dae 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -12,12 +12,10 @@
#include <linux/console.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
#include <linux/param.h>
#include <linux/sched.h>
#include <asm/bootinfo.h>
-#include <asm/mc146818-time.h>
#include <asm/mipsregs.h>
#include <asm/mmu_context.h>
#include <asm/sgialib.h>
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index cbf5939..89f7fca 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -114,16 +114,14 @@
if (initrd_start) {
if ((initrd_pstart > addr) &&
(initrd_pstart < (addr + size))) {
- add_memory_region(addr,
- initrd_pstart - addr,
- BOOT_MEM_RAM);
+ memblock_add(addr,
+ initrd_pstart - addr);
rd_flag = 1;
}
if ((initrd_pend > addr) &&
(initrd_pend < (addr + size))) {
- add_memory_region(initrd_pend,
- (addr + size) - initrd_pend,
- BOOT_MEM_RAM);
+ memblock_add(initrd_pend,
+ (addr + size) - initrd_pend);
rd_flag = 1;
}
}
@@ -142,7 +140,7 @@
*/
if (size > 512)
size -= 512;
- add_memory_region(addr, size, BOOT_MEM_RAM);
+ memblock_add(addr, size);
}
board_mem_region_addrs[board_mem_region_count] = addr;
board_mem_region_sizes[board_mem_region_count] = size;
@@ -158,8 +156,8 @@
}
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start) {
- add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
- BOOT_MEM_RESERVED);
+ memblock_add(initrd_pstart, initrd_pend - initrd_pstart);
+ memblock_reserve(initrd_pstart, initrd_pend - initrd_pstart);
}
#endif
}
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 360c388..bf8a3cd 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -22,7 +22,6 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/platform_data/txx9/ndfmc.h>
-#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <asm/txx9irq.h>
@@ -94,22 +93,6 @@
static struct resource tx4939_sram_resource;
#define TX4939_SRAM_SIZE 0x800
-void __init tx4939_add_memory_regions(void)
-{
- int i;
- unsigned long start, size;
- u64 win;
-
- for (i = 0; i < 4; i++) {
- if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
- continue;
- win = ____raw_readq(&tx4939_ddrcptr->win[i]);
- start = (unsigned long)(win >> 48);
- size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start;
- add_memory_region(start << 20, size << 20, BOOT_MEM_RAM);
- }
-}
-
void __init tx4939_setup(void)
{
int i;
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 68a9647..53c68de 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -37,7 +37,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <asm/bootinfo.h>
+#include <linux/memblock.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
@@ -47,6 +47,6 @@
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
pr_err("TX3927 TLB off\n");
- add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+ memblock_add(0, JMR3927_SDRAM_SIZE);
txx9_sio_putchar_init(TX3927_SIO_REG(1));
}
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index fe6d0b5..9b4acff 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -29,13 +29,14 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/init.h>
-#include <asm/bootinfo.h>
+#include <linux/memblock.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4927.h>
void __init rbtx4927_prom_init(void)
{
- add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+ memblock_add(0, tx4927_get_mem_size());
txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index 2b36a2e..0de8471 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -12,12 +12,11 @@
#include <linux/init.h>
#include <linux/memblock.h>
-#include <asm/bootinfo.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4938.h>
void __init rbtx4938_prom_init(void)
{
- add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+ memblock_add(0, tx4938_get_mem_size());
txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4939/prom.c b/arch/mips/txx9/rbtx4939/prom.c
index bd277ec..ba25ba1 100644
--- a/arch/mips/txx9/rbtx4939/prom.c
+++ b/arch/mips/txx9/rbtx4939/prom.c
@@ -7,11 +7,23 @@
*/
#include <linux/init.h>
+#include <linux/memblock.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4939.h>
void __init rbtx4939_prom_init(void)
{
- tx4939_add_memory_regions();
+ unsigned long start, size;
+ u64 win;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
+ continue;
+ win = ____raw_readq(&tx4939_ddrcptr->win[i]);
+ start = (unsigned long)(win >> 48);
+ size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start;
+ memblock_add(start << 20, size << 20);
+ }
txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/drivers/firmware/broadcom/bcm47xx_sprom.c b/drivers/firmware/broadcom/bcm47xx_sprom.c
index 4787f86c..14fbcd1 100644
--- a/drivers/firmware/broadcom/bcm47xx_sprom.c
+++ b/drivers/firmware/broadcom/bcm47xx_sprom.c
@@ -27,6 +27,7 @@
*/
#include <linux/bcm47xx_nvram.h>
+#include <linux/bcm47xx_sprom.h>
#include <linux/bcma/bcma.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index bd5e7e9..22c7bc9 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -35,7 +35,6 @@
#include <linux/refcount.h>
#include <asm/io.h>
-#include <asm/war.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_uart.h>
@@ -157,7 +156,7 @@
unsigned char retval;
retval = __read_sbdchn(sport, reg);
- if (SIBYTE_1956_WAR)
+ if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS))
__war_sbd1956(sport);
return retval;
}
@@ -167,7 +166,7 @@
unsigned char retval;
retval = __read_sbdshr(sport, reg);
- if (SIBYTE_1956_WAR)
+ if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS))
__war_sbd1956(sport);
return retval;
}
@@ -175,14 +174,14 @@
static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value)
{
__write_sbdchn(sport, reg, value);
- if (SIBYTE_1956_WAR)
+ if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS))
__war_sbd1956(sport);
}
static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value)
{
__write_sbdshr(sport, reg, value);
- if (SIBYTE_1956_WAR)
+ if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS))
__war_sbd1956(sport);
}
diff --git a/include/linux/bcm47xx_sprom.h b/include/linux/bcm47xx_sprom.h
index b0f4424..f8254fd 100644
--- a/include/linux/bcm47xx_sprom.h
+++ b/include/linux/bcm47xx_sprom.h
@@ -9,9 +9,19 @@
#include <linux/kernel.h>
#include <linux/vmalloc.h>
+struct ssb_sprom;
+
#ifdef CONFIG_BCM47XX_SPROM
+void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
+ bool fallback);
int bcm47xx_sprom_register_fallbacks(void);
#else
+static inline void bcm47xx_fill_sprom(struct ssb_sprom *sprom,
+ const char *prefix,
+ bool fallback)
+{
+}
+
static inline int bcm47xx_sprom_register_fallbacks(void)
{
return -ENOTSUPP;
diff --git a/include/linux/bcm963xx_tag.h b/include/linux/bcm963xx_tag.h
index b87945c..7edb809 100644
--- a/include/linux/bcm963xx_tag.h
+++ b/include/linux/bcm963xx_tag.h
@@ -84,7 +84,7 @@
char flash_layout_ver[FLASHLAYOUTVER_LEN];
/* 196-199: kernel+rootfs CRC32 */
__u32 fskernel_crc;
- /* 200-215: Unused except on Alice Gate where is is information */
+ /* 200-215: Unused except on Alice Gate where it is information */
char information2[TAGINFO2_LEN];
/* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */
__u32 image_crc;
diff --git a/lib/decompress_unzstd.c b/lib/decompress_unzstd.c
index 0ad2c15..790abc4 100644
--- a/lib/decompress_unzstd.c
+++ b/lib/decompress_unzstd.c
@@ -178,8 +178,13 @@
int err;
size_t ret;
+ /*
+ * ZSTD decompression code won't be happy if the buffer size is so big
+ * that its end address overflows. When the size is not provided, make
+ * it as big as possible without having the end address overflow.
+ */
if (out_len == 0)
- out_len = LONG_MAX; /* no limit */
+ out_len = UINTPTR_MAX - (uintptr_t)out_buf;
if (fill == NULL && flush == NULL)
/*
