diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt
deleted file mode 100644
index adf7b7a..0000000
--- a/Documentation/devicetree/bindings/riscv/cpus.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-===================
-RISC-V CPU Bindings
-===================
-
-The device tree allows to describe the layout of CPUs in a system through
-the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-defining properties for every cpu.
-
-Bindings for CPU nodes follow the Devicetree Specification, available from:
-
-https://www.devicetree.org/specifications/
-
-with updates for 32-bit and 64-bit RISC-V systems provided in this document.
-
-===========
-Terminology
-===========
-
-This document uses some terminology common to the RISC-V community that is not
-widely used, the definitions of which are listed here:
-
-* hart: A hardware execution context, which contains all the state mandated by
-  the RISC-V ISA: a PC and some registers.  This terminology is designed to
-  disambiguate software's view of execution contexts from any particular
-  microarchitectural implementation strategy.  For example, my Intel laptop is
-  described as having one socket with two cores, each of which has two hyper
-  threads.  Therefore this system has four harts.
-
-=====================================
-cpus and cpu node bindings definition
-=====================================
-
-The RISC-V architecture, in accordance with the Devicetree Specification,
-requires the cpus and cpu nodes to be present and contain the properties
-described below.
-
-- cpus node
-
-        Description: Container of cpu nodes
-
-        The node name must be "cpus".
-
-        A cpus node must define the following properties:
-
-        - #address-cells
-                Usage: required
-                Value type: <u32>
-                Definition: must be set to 1
-        - #size-cells
-                Usage: required
-                Value type: <u32>
-                Definition: must be set to 0
-
-- cpu node
-
-        Description: Describes a hart context
-
-        PROPERTIES
-
-        - device_type
-                Usage: required
-                Value type: <string>
-                Definition: must be "cpu"
-        - reg
-                Usage: required
-                Value type: <u32>
-                Definition: The hart ID of this CPU node
-        - compatible:
-                Usage: required
-                Value type: <stringlist>
-                Definition: must contain "riscv", may contain one of
-                            "sifive,rocket0"
-        - mmu-type:
-                Usage: optional
-                Value type: <string>
-                Definition: Specifies the CPU's MMU type.  Possible values are
-                            "riscv,sv32"
-                            "riscv,sv39"
-                            "riscv,sv48"
-        - riscv,isa:
-                Usage: required
-                Value type: <string>
-                Definition: Contains the RISC-V ISA string of this hart.  These
-                            ISA strings are defined by the RISC-V ISA manual.
-
-Example: SiFive Freedom U540G Development Kit
----------------------------------------------
-
-This system contains two harts: a hart marked as disabled that's used for
-low-level system tasks and should be ignored by Linux, and a second hart that
-Linux is allowed to run on.
-
-        cpus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                timebase-frequency = <1000000>;
-                cpu@0 {
-                        clock-frequency = <1600000000>;
-                        compatible = "sifive,rocket0", "riscv";
-                        device_type = "cpu";
-                        i-cache-block-size = <64>;
-                        i-cache-sets = <128>;
-                        i-cache-size = <16384>;
-                        next-level-cache = <&L15 &L0>;
-                        reg = <0>;
-                        riscv,isa = "rv64imac";
-                        status = "disabled";
-                        L10: interrupt-controller {
-                                #interrupt-cells = <1>;
-                                compatible = "riscv,cpu-intc";
-                                interrupt-controller;
-                        };
-                };
-                cpu@1 {
-                        clock-frequency = <1600000000>;
-                        compatible = "sifive,rocket0", "riscv";
-                        d-cache-block-size = <64>;
-                        d-cache-sets = <64>;
-                        d-cache-size = <32768>;
-                        d-tlb-sets = <1>;
-                        d-tlb-size = <32>;
-                        device_type = "cpu";
-                        i-cache-block-size = <64>;
-                        i-cache-sets = <64>;
-                        i-cache-size = <32768>;
-                        i-tlb-sets = <1>;
-                        i-tlb-size = <32>;
-                        mmu-type = "riscv,sv39";
-                        next-level-cache = <&L15 &L0>;
-                        reg = <1>;
-                        riscv,isa = "rv64imafdc";
-                        status = "okay";
-                        tlb-split;
-                        L13: interrupt-controller {
-                                #interrupt-cells = <1>;
-                                compatible = "riscv,cpu-intc";
-                                interrupt-controller;
-                        };
-                };
-        };
-
-Example: Spike ISA Simulator with 1 Hart
-----------------------------------------
-
-This device tree matches the Spike ISA golden model as run with `spike -p1`.
-
-        cpus {
-                cpu@0 {
-                        device_type = "cpu";
-                        reg = <0x00000000>;
-                        status = "okay";
-                        compatible = "riscv";
-                        riscv,isa = "rv64imafdc";
-                        mmu-type = "riscv,sv48";
-                        clock-frequency = <0x3b9aca00>;
-                        interrupt-controller {
-                                #interrupt-cells = <0x00000001>;
-                                interrupt-controller;
-                                compatible = "riscv,cpu-intc";
-                        }
-                }
-        }
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index c899111..b261a30 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -10,6 +10,18 @@
   - Paul Walmsley <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@sifive.com>
 
+description: |
+  This document uses some terminology common to the RISC-V community
+  that is not widely used, the definitions of which are listed here:
+
+  hart: A hardware execution context, which contains all the state
+  mandated by the RISC-V ISA: a PC and some registers.  This
+  terminology is designed to disambiguate software's view of execution
+  contexts from any particular microarchitectural implementation
+  strategy.  For example, an Intel laptop containing one socket with
+  two cores, each of which has two hyperthreads, could be described as
+  having four harts.
+
 properties:
   compatible:
     items:
@@ -50,6 +62,10 @@
       User-Level ISA document, available from
       https://riscv.org/specifications/
 
+      While the isa strings in ISA specification are case
+      insensitive, letters in the riscv,isa string must be all
+      lowercase to simplify parsing.
+
   timebase-frequency:
     type: integer
     minimum: 1
diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml
index 9d17dc2..3ab5327 100644
--- a/Documentation/devicetree/bindings/riscv/sifive.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive.yaml
@@ -19,7 +19,7 @@
   compatible:
     items:
       - enum:
-          - sifive,freedom-unleashed-a00
+          - sifive,hifive-unleashed-a00
       - const: sifive,fu540-c000
       - const: sifive,fu540
 ...
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 8e364eb..267feaa 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -5,5 +5,3 @@
 lib-y	+= uaccess.o
 
 lib-$(CONFIG_64BIT) += tishift.o
-
-lib-$(CONFIG_32BIT) += udivdi3.o
diff --git a/arch/riscv/lib/delay.c b/arch/riscv/lib/delay.c
index 87ff89e..f51c9a0 100644
--- a/arch/riscv/lib/delay.c
+++ b/arch/riscv/lib/delay.c
@@ -81,9 +81,13 @@
 void udelay(unsigned long usecs)
 {
 	u64 ucycles = (u64)usecs * lpj_fine * UDELAY_MULT;
+	u64 n;
 
 	if (unlikely(usecs > MAX_UDELAY_US)) {
-		__delay((u64)usecs * riscv_timebase / 1000000ULL);
+		n = (u64)usecs * riscv_timebase;
+		do_div(n, 1000000);
+
+		__delay(n);
 		return;
 	}
 
diff --git a/arch/riscv/lib/udivdi3.S b/arch/riscv/lib/udivdi3.S
deleted file mode 100644
index 3f07476..0000000
--- a/arch/riscv/lib/udivdi3.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2016-2017 Free Software Foundation, Inc.
- */
-
-#include <linux/linkage.h>
-
-ENTRY(__udivdi3)
-	mv	a2, a1
-	mv	a1, a0
-	li	a0, -1
-	beqz	a2, .L5
-	li	a3, 1
-	bgeu	a2, a1, .L2
-.L1:
-	blez	a2, .L2
-	slli	a2, a2, 1
-	slli	a3, a3, 1
-	bgtu	a1, a2, .L1
-.L2:
-	li	a0, 0
-.L3:
-	bltu	a1, a2, .L4
-	sub	a1, a1, a2
-	or	a0, a0, a3
-.L4:
-	srli	a3, a3, 1
-	srli	a2, a2, 1
-	bnez	a3, .L3
-.L5:
-	ret
-ENDPROC(__udivdi3)
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 5e6038f..09e0311 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -55,7 +55,7 @@
 	return get_cycles64();
 }
 
-static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = {
+static struct clocksource riscv_clocksource = {
 	.name		= "riscv_clocksource",
 	.rating		= 300,
 	.mask		= CLOCKSOURCE_MASK(64),
@@ -92,7 +92,6 @@
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
 	int cpuid, hartid, error;
-	struct clocksource *cs;
 
 	hartid = riscv_of_processor_hartid(n);
 	if (hartid < 0) {
@@ -112,8 +111,7 @@
 
 	pr_info("%s: Registering clocksource cpuid [%d] hartid [%d]\n",
 	       __func__, cpuid, hartid);
-	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
-	error = clocksource_register_hz(cs, riscv_timebase);
+	error = clocksource_register_hz(&riscv_clocksource, riscv_timebase);
 	if (error) {
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
 		       error, cpuid);