tree fdf348d4f9ab6ac68f52c3011900d9a2e9845598
parent 62956be8f95b93e9f91ffe2e5aa9c0e411af5a14
author Ard Biesheuvel <ardb@kernel.org> 1591537295 +0200
committer Ard Biesheuvel <ardb@kernel.org> 1592400551 +0200

efi/libstub: arm: Print CPU boot mode and MMU state at boot

On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.

So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,

  EFI stub: Entering in SVC mode with MMU enabled

Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:

  efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
  efi: CPSR at EFI stub entry        : 0x600001d3
  efi: SCTLR at EFI stub entry       : 0x00c51838
  efi: CPSR after ExitBootServices() : 0x600001d3
  efi: SCTLR after ExitBootServices(): 0x00c50838

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>