blob: 3ee9263adf7354cfc7d62e0839f2fb91ef8bda5a [file] [log] [blame]
* Fujitsu SDHCI controller
This file documents differences between the core properties in mmc.txt
and the properties used by the sdhci_f_sdh30 driver.
Required properties:
- compatible: "fujitsu,mb86s70-sdhci-3.0"
- clocks: Must contain an entry for each entry in clock-names. It is a
list of phandles and clock-specifier pairs.
See ../clocks/clock-bindings.txt for details.
- clock-names: Should contain the following two entries:
"iface" - clock used for sdhci interface
"core" - core clock for sdhci controller
Optional properties:
- vqmmc-supply: phandle to the regulator device tree node, mentioned
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
requires the CMD_DAT_DELAY control to be enabled.
sdhci1: mmc@36600000 {
compatible = "fujitsu,mb86s70-sdhci-3.0";
reg = <0 0x36600000 0x1000>;
interrupts = <0 172 0x4>,
<0 173 0x4>;
bus-width = <4>;
vqmmc-supply = <&vccq_sdhci1>;
clocks = <&clock 2 2 0>, <&clock 2 3 0>;
clock-names = "iface", "core";