arch/arm/boot/dts/vf610-zii-dev.dtsi - linux/torvalds/linux - Git at Google

 /*
  * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
  *
  * Based on an original 'vf610-twr.dts' which is Copyright 2015,
  * Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include "vf610.dtsi"

 / {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};

 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";

 		debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

 	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_mcu";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	usb0_vbus: regulator-usb0-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-0 = <&pinctrl_usb_vbus>;
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		regulator-always-on;
 		regulator-boot-on;
 		gpio = <&gpio0 6 0>;
 	};
 };

 &adc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_ad5>;
 	vref-supply = <&reg_vcc_3v3_mcu>;
 	status = "okay";
 };

 &edma0 {
 	status = "okay";
 };

 &edma1 {
 	status = "okay";
 };

 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
 	status = "okay";
 };

 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec0>;
 	status = "okay";
 };

 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";

 	fixed-link {
 		   speed = <100>;
 		   full-duplex;
 	};

 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "okay";
 	};
 };

 &i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";

 	lm75@48 {
 		compatible = "national,lm75";
 		reg = <0x48>;
 	};

 	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
 	};

 	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 	};

 	ds1682@6b {
 		compatible = "dallas,ds1682";
 		reg = <0x6b>;
 	};
 };

 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 };

 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 };

 &qspi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi0>;
 	status = "okay";

 	/*
 	 * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
 	 * modes, so, spi-max-frequency is limited to 90MHz
 	 */
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <90000000>;
 		spi-rx-bus-width = <4>;
 		reg = <0>;
 		m25p,fast-read;
 	};

 	flash@2 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <90000000>;
 		spi-rx-bus-width = <4>;
 		reg = <2>;
 		m25p,fast-read;
 	};
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0>;
 	status = "okay";
 };

 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };

 &usbdev0 {
 	disable-over-current;
 	vbus-supply = <&usb0_vbus>;
 	dr_mode = "host";
 	status = "okay";
 };

 &usbh1 {
 	disable-over-current;
 	status = "okay";
 };

 &usbmisc0 {
 	status = "okay";
 };

 &usbmisc1 {
 	status = "okay";
 };

 &usbphy0 {
 	status = "okay";
 };

 &usbphy1 {
 	status = "okay";
 };

 &tempsensor {
 	io-channels = <&adc0 16>;
 };

 &iomuxc {
 	pinctrl_adc0_ad5: adc0ad5grp {
 		fsl,pins = <
 			VF610_PAD_PTC30__ADC0_SE5	0x00a1
 		>;
 	};

 	pinctrl_dspi0: dspi0grp {
 		fsl,pins = <
 			VF610_PAD_PTB18__DSPI0_CS1	0x1182
 			VF610_PAD_PTB19__DSPI0_CS0	0x1182
 			VF610_PAD_PTB20__DSPI0_SIN	0x1181
 			VF610_PAD_PTB21__DSPI0_SOUT	0x1182
 			VF610_PAD_PTB22__DSPI0_SCK	0x1182
 		>;
 	};

 	pinctrl_dspi2: dspi2grp {
 		fsl,pins = <
 			VF610_PAD_PTD31__DSPI2_CS1	0x1182
 			VF610_PAD_PTD30__DSPI2_CS0	0x1182
 			VF610_PAD_PTD29__DSPI2_SIN	0x1181
 			VF610_PAD_PTD28__DSPI2_SOUT	0x1182
 			VF610_PAD_PTD27__DSPI2_SCK	0x1182
 		>;
 	};

 	pinctrl_esdhc1: esdhc1grp {
 		fsl,pins = <
 			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
 			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
 			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
 			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
 			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
 			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
 			VF610_PAD_PTA7__GPIO_134	0x219d
 		>;
 	};

 	pinctrl_fec0: fec0grp {
 		fsl,pins = <
 			VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d2
 			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d3
 			VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
 			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
 			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
 			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
 			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
 			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
 			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
 		>;
 	};

 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
 			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
 			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
 			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
 			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
 			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
 			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
 			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
 			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
 			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
 		>;
 	};

 	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
 			VF610_PAD_PTB20__GPIO_42	0x33e1
 			VF610_PAD_PTB19__GPIO_41	0x33e2
 			VF610_PAD_PTB18__GPIO_40	0x33e2
 		>;
 	};

 	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 		fsl,pins = <
 			VF610_PAD_PTB5__GPIO_27		0x219d
 		>;
 	};

 	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
 		fsl,pins = <
 			VF610_PAD_PTB4__GPIO_26		0x219d
 		>;
 	};

 	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
 			 >;
 	};

 	pinctrl_i2c0: i2c0grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__I2C0_SCL	0x37ff
 			VF610_PAD_PTB15__I2C0_SDA	0x37ff
 		>;
 	};

 	pinctrl_i2c0_gpio: i2c0grp-gpio {
 		fsl,pins = <
 			VF610_PAD_PTB14__GPIO_36	0x31c2
 			VF610_PAD_PTB15__GPIO_37	0x31c2
 		>;
 	};


 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			VF610_PAD_PTB16__I2C1_SCL	0x37ff
 			VF610_PAD_PTB17__I2C1_SDA	0x37ff
 		>;
 	};

 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			VF610_PAD_PTA22__I2C2_SCL	0x37ff
 			VF610_PAD_PTA23__I2C2_SDA	0x37ff
 		>;
 	};

 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
 			 >;
 	};

 	pinctrl_qspi0: qspi0grp {
 		fsl,pins = <
 			VF610_PAD_PTD0__QSPI0_A_QSCK	0x38c2
 			VF610_PAD_PTD1__QSPI0_A_CS0	0x38c2
 			VF610_PAD_PTD2__QSPI0_A_DATA3	0x38c3
 			VF610_PAD_PTD3__QSPI0_A_DATA2	0x38c3
 			VF610_PAD_PTD4__QSPI0_A_DATA1	0x38c3
 			VF610_PAD_PTD5__QSPI0_A_DATA0	0x38c3
 			VF610_PAD_PTD7__QSPI0_B_QSCK	0x38c2
 			VF610_PAD_PTD8__QSPI0_B_CS0	0x38c2
 			VF610_PAD_PTD9__QSPI0_B_DATA3	0x38c3
 			VF610_PAD_PTD10__QSPI0_B_DATA2	0x38c3
 			VF610_PAD_PTD11__QSPI0_B_DATA1	0x38c3
 			VF610_PAD_PTD12__QSPI0_B_DATA0	0x38c3
 		>;
 	};

 	pinctrl_uart0: uart0grp {
 		fsl,pins = <
 			VF610_PAD_PTB10__UART0_TX	0x21a2
 			VF610_PAD_PTB11__UART0_RX	0x21a1
 		>;
 	};

 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			VF610_PAD_PTB23__UART1_TX	0x21a2
 			VF610_PAD_PTB24__UART1_RX	0x21a1
 		>;
 	};

 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			VF610_PAD_PTD23__UART2_TX	0x21a2
 			VF610_PAD_PTD22__UART2_RX	0x21a1
 		>;
 	};

 	pinctrl_usb_vbus: pinctrl-usb-vbus {
 		fsl,pins = <
 			VF610_PAD_PTA16__GPIO_6	0x31c2
 		>;
 	};

 	pinctrl_usb0_host: usb0-host-grp {
 		fsl,pins = <
 			VF610_PAD_PTD6__GPIO_85		0x0062
 		>;
 	};
 };
	/*
	* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
	*
	* Based on an original 'vf610-twr.dts' which is Copyright 2015,
	* Freescale Semiconductor, Inc.
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include "vf610.dtsi"

	/ {
	chosen {
	stdout-path = "serial0:115200n8";
	};

	memory@80000000 {
	device_type = "memory";
	reg = <0x80000000 0x20000000>;
	};

	gpio-leds {
	compatible = "gpio-leds";
	pinctrl-0 = <&pinctrl_leds_debug>;
	pinctrl-names = "default";

	debug {
	label = "zii:green:debug1";
	gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "heartbeat";
	};
	};

	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
	compatible = "regulator-fixed";
	regulator-name = "vcc_3v3_mcu";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	usb0_vbus: regulator-usb0-vbus {
	compatible = "regulator-fixed";
	pinctrl-0 = <&pinctrl_usb_vbus>;
	regulator-name = "usb_vbus";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	enable-active-high;
	regulator-always-on;
	regulator-boot-on;
	gpio = <&gpio0 6 0>;
	};
	};

	&adc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_adc0_ad5>;
	vref-supply = <&reg_vcc_3v3_mcu>;
	status = "okay";
	};

	&edma0 {
	status = "okay";
	};

	&edma1 {
	status = "okay";
	};

	&esdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc1>;
	bus-width = <4>;
	status = "okay";
	};

	&fec0 {
	phy-mode = "rmii";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec0>;
	status = "okay";
	};

	&fec1 {
	phy-mode = "rmii";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	status = "okay";

	fixed-link {
	speed = <100>;
	full-duplex;
	};

	mdio1: mdio {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	};
	};

	&i2c0 {
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c0>;
	pinctrl-1 = <&pinctrl_i2c0_gpio>;
	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
	status = "okay";

	lm75@48 {
	compatible = "national,lm75";
	reg = <0x48>;
	};

	eeprom@50 {
	compatible = "atmel,24c04";
	reg = <0x50>;
	};

	eeprom@52 {
	compatible = "atmel,24c04";
	reg = <0x52>;
	};

	ds1682@6b {
	compatible = "dallas,ds1682";
	reg = <0x6b>;
	};
	};

	&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";
	};

	&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
	};

	&qspi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi0>;
	status = "okay";

	/*
	* Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
	* modes, so, spi-max-frequency is limited to 90MHz
	*/
	flash@0 {
	compatible = "jedec,spi-nor";
	#address-cells = <1>;
	#size-cells = <1>;
	spi-max-frequency = <90000000>;
	spi-rx-bus-width = <4>;
	reg = <0>;
	m25p,fast-read;
	};

	flash@2 {
	compatible = "jedec,spi-nor";
	#address-cells = <1>;
	#size-cells = <1>;
	spi-max-frequency = <90000000>;
	spi-rx-bus-width = <4>;
	reg = <2>;
	m25p,fast-read;
	};
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart0>;
	status = "okay";
	};

	&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
	};

	&usbdev0 {
	disable-over-current;
	vbus-supply = <&usb0_vbus>;
	dr_mode = "host";
	status = "okay";
	};

	&usbh1 {
	disable-over-current;
	status = "okay";
	};

	&usbmisc0 {
	status = "okay";
	};

	&usbmisc1 {
	status = "okay";
	};

	&usbphy0 {
	status = "okay";
	};

	&usbphy1 {
	status = "okay";
	};

	&tempsensor {
	io-channels = <&adc0 16>;
	};

	&iomuxc {
	pinctrl_adc0_ad5: adc0ad5grp {
	fsl,pins = <
	VF610_PAD_PTC30__ADC0_SE5 0x00a1
	>;
	};

	pinctrl_dspi0: dspi0grp {
	fsl,pins = <
	VF610_PAD_PTB18__DSPI0_CS1 0x1182
	VF610_PAD_PTB19__DSPI0_CS0 0x1182
	VF610_PAD_PTB20__DSPI0_SIN 0x1181
	VF610_PAD_PTB21__DSPI0_SOUT 0x1182
	VF610_PAD_PTB22__DSPI0_SCK 0x1182
	>;
	};

	pinctrl_dspi2: dspi2grp {
	fsl,pins = <
	VF610_PAD_PTD31__DSPI2_CS1 0x1182
	VF610_PAD_PTD30__DSPI2_CS0 0x1182
	VF610_PAD_PTD29__DSPI2_SIN 0x1181
	VF610_PAD_PTD28__DSPI2_SOUT 0x1182
	VF610_PAD_PTD27__DSPI2_SCK 0x1182
	>;
	};

	pinctrl_esdhc1: esdhc1grp {
	fsl,pins = <
	VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
	VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
	VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
	VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
	VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
	VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
	VF610_PAD_PTA7__GPIO_134 0x219d
	>;
	};

	pinctrl_fec0: fec0grp {
	fsl,pins = <
	VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
	VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
	VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
	VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
	VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
	VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
	VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
	VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
	VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
	>;
	};

	pinctrl_fec1: fec1grp {
	fsl,pins = <
	VF610_PAD_PTA6__RMII_CLKIN 0x30d1
	VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
	VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
	VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
	VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
	VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
	VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
	VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
	VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
	VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
	>;
	};

	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
	fsl,pins = <
	VF610_PAD_PTB22__GPIO_44 0x33e2
	VF610_PAD_PTB21__GPIO_43 0x33e2
	VF610_PAD_PTB20__GPIO_42 0x33e1
	VF610_PAD_PTB19__GPIO_41 0x33e2
	VF610_PAD_PTB18__GPIO_40 0x33e2
	>;
	};

	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
	fsl,pins = <
	VF610_PAD_PTB5__GPIO_27 0x219d
	>;
	};

	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
	fsl,pins = <
	VF610_PAD_PTB4__GPIO_26 0x219d
	>;
	};

	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
	fsl,pins = <
	VF610_PAD_PTE14__GPIO_119 0x31c2
	>;
	};

	pinctrl_i2c0: i2c0grp {
	fsl,pins = <
	VF610_PAD_PTB14__I2C0_SCL 0x37ff
	VF610_PAD_PTB15__I2C0_SDA 0x37ff
	>;
	};

	pinctrl_i2c0_gpio: i2c0grp-gpio {
	fsl,pins = <
	VF610_PAD_PTB14__GPIO_36 0x31c2
	VF610_PAD_PTB15__GPIO_37 0x31c2
	>;
	};


	pinctrl_i2c1: i2c1grp {
	fsl,pins = <
	VF610_PAD_PTB16__I2C1_SCL 0x37ff
	VF610_PAD_PTB17__I2C1_SDA 0x37ff
	>;
	};

	pinctrl_i2c2: i2c2grp {
	fsl,pins = <
	VF610_PAD_PTA22__I2C2_SCL 0x37ff
	VF610_PAD_PTA23__I2C2_SDA 0x37ff
	>;
	};

	pinctrl_leds_debug: pinctrl-leds-debug {
	fsl,pins = <
	VF610_PAD_PTD20__GPIO_74 0x31c2
	>;
	};

	pinctrl_qspi0: qspi0grp {
	fsl,pins = <
	VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
	VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
	VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
	VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
	VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
	VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
	VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
	VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
	VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
	VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
	VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
	VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
	>;
	};

	pinctrl_uart0: uart0grp {
	fsl,pins = <
	VF610_PAD_PTB10__UART0_TX 0x21a2
	VF610_PAD_PTB11__UART0_RX 0x21a1
	>;
	};

	pinctrl_uart1: uart1grp {
	fsl,pins = <
	VF610_PAD_PTB23__UART1_TX 0x21a2
	VF610_PAD_PTB24__UART1_RX 0x21a1
	>;
	};

	pinctrl_uart2: uart2grp {
	fsl,pins = <
	VF610_PAD_PTD23__UART2_TX 0x21a2
	VF610_PAD_PTD22__UART2_RX 0x21a1
	>;
	};

	pinctrl_usb_vbus: pinctrl-usb-vbus {
	fsl,pins = <
	VF610_PAD_PTA16__GPIO_6 0x31c2
	>;
	};

	pinctrl_usb0_host: usb0-host-grp {
	fsl,pins = <
	VF610_PAD_PTD6__GPIO_85 0x0062
	>;
	};
	};