| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle |
| * Copyright (C) 1994, 1995, 1996 Paul M. Antoine. |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * Copyright (C) 2007 Maciej W. Rozycki |
| */ |
| #ifndef _ASM_STACKFRAME_H |
| #define _ASM_STACKFRAME_H |
| |
| #include <linux/threads.h> |
| |
| #include <asm/asm.h> |
| #include <asm/asmmacro.h> |
| #include <asm/mipsregs.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/thread_info.h> |
| |
| /* Make the addition of cfi info a little easier. */ |
| .macro cfi_rel_offset reg offset=0 docfi=0 |
| .if \docfi |
| .cfi_rel_offset \reg, \offset |
| .endif |
| .endm |
| |
| .macro cfi_st reg offset=0 docfi=0 |
| LONG_S \reg, \offset(sp) |
| cfi_rel_offset \reg, \offset, \docfi |
| .endm |
| |
| .macro cfi_restore reg offset=0 docfi=0 |
| .if \docfi |
| .cfi_restore \reg |
| .endif |
| .endm |
| |
| .macro cfi_ld reg offset=0 docfi=0 |
| LONG_L \reg, \offset(sp) |
| cfi_restore \reg \offset \docfi |
| .endm |
| |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| #define STATMASK 0x3f |
| #else |
| #define STATMASK 0x1f |
| #endif |
| |
| .macro SAVE_AT docfi=0 |
| .set push |
| .set noat |
| cfi_st $1, PT_R1, \docfi |
| .set pop |
| .endm |
| |
| .macro SAVE_TEMP docfi=0 |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS |
| mflhxu v1 |
| LONG_S v1, PT_LO(sp) |
| mflhxu v1 |
| LONG_S v1, PT_HI(sp) |
| mflhxu v1 |
| LONG_S v1, PT_ACX(sp) |
| #elif !defined(CONFIG_CPU_MIPSR6) |
| mfhi v1 |
| #endif |
| #ifdef CONFIG_32BIT |
| cfi_st $8, PT_R8, \docfi |
| cfi_st $9, PT_R9, \docfi |
| #endif |
| cfi_st $10, PT_R10, \docfi |
| cfi_st $11, PT_R11, \docfi |
| cfi_st $12, PT_R12, \docfi |
| #if !defined(CONFIG_CPU_HAS_SMARTMIPS) && !defined(CONFIG_CPU_MIPSR6) |
| LONG_S v1, PT_HI(sp) |
| mflo v1 |
| #endif |
| cfi_st $13, PT_R13, \docfi |
| cfi_st $14, PT_R14, \docfi |
| cfi_st $15, PT_R15, \docfi |
| cfi_st $24, PT_R24, \docfi |
| #if !defined(CONFIG_CPU_HAS_SMARTMIPS) && !defined(CONFIG_CPU_MIPSR6) |
| LONG_S v1, PT_LO(sp) |
| #endif |
| #ifdef CONFIG_CPU_CAVIUM_OCTEON |
| /* |
| * The Octeon multiplier state is affected by general |
| * multiply instructions. It must be saved before and |
| * kernel code might corrupt it |
| */ |
| jal octeon_mult_save |
| #endif |
| .endm |
| |
| .macro SAVE_STATIC docfi=0 |
| cfi_st $16, PT_R16, \docfi |
| cfi_st $17, PT_R17, \docfi |
| cfi_st $18, PT_R18, \docfi |
| cfi_st $19, PT_R19, \docfi |
| cfi_st $20, PT_R20, \docfi |
| cfi_st $21, PT_R21, \docfi |
| cfi_st $22, PT_R22, \docfi |
| cfi_st $23, PT_R23, \docfi |
| cfi_st $30, PT_R30, \docfi |
| .endm |
| |
| /* |
| * get_saved_sp returns the SP for the current CPU by looking in the |
| * kernelsp array for it. If tosp is set, it stores the current sp in |
| * k0 and loads the new value in sp. If not, it clobbers k0 and |
| * stores the new value in k1, leaving sp unaffected. |
| */ |
| #ifdef CONFIG_SMP |
| |
| /* SMP variation */ |
| .macro get_saved_sp docfi=0 tosp=0 |
| ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG |
| #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) |
| lui k1, %hi(kernelsp) |
| #else |
| lui k1, %highest(kernelsp) |
| daddiu k1, %higher(kernelsp) |
| dsll k1, 16 |
| daddiu k1, %hi(kernelsp) |
| dsll k1, 16 |
| #endif |
| LONG_SRL k0, SMP_CPUID_PTRSHIFT |
| LONG_ADDU k1, k0 |
| .if \tosp |
| move k0, sp |
| .if \docfi |
| .cfi_register sp, k0 |
| .endif |
| LONG_L sp, %lo(kernelsp)(k1) |
| .else |
| LONG_L k1, %lo(kernelsp)(k1) |
| .endif |
| .endm |
| |
| .macro set_saved_sp stackp temp temp2 |
| ASM_CPUID_MFC0 \temp, ASM_SMP_CPUID_REG |
| LONG_SRL \temp, SMP_CPUID_PTRSHIFT |
| LONG_S \stackp, kernelsp(\temp) |
| .endm |
| #else /* !CONFIG_SMP */ |
| /* Uniprocessor variation */ |
| .macro get_saved_sp docfi=0 tosp=0 |
| #ifdef CONFIG_CPU_JUMP_WORKAROUNDS |
| /* |
| * Clear BTB (branch target buffer), forbid RAS (return address |
| * stack) to workaround the Out-of-order Issue in Loongson2F |
| * via its diagnostic register. |
| */ |
| move k0, ra |
| jal 1f |
| nop |
| 1: jal 1f |
| nop |
| 1: jal 1f |
| nop |
| 1: jal 1f |
| nop |
| 1: move ra, k0 |
| li k0, 3 |
| mtc0 k0, $22 |
| #endif /* CONFIG_CPU_JUMP_WORKAROUNDS */ |
| #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) |
| lui k1, %hi(kernelsp) |
| #else |
| lui k1, %highest(kernelsp) |
| daddiu k1, %higher(kernelsp) |
| dsll k1, k1, 16 |
| daddiu k1, %hi(kernelsp) |
| dsll k1, k1, 16 |
| #endif |
| .if \tosp |
| move k0, sp |
| .if \docfi |
| .cfi_register sp, k0 |
| .endif |
| LONG_L sp, %lo(kernelsp)(k1) |
| .else |
| LONG_L k1, %lo(kernelsp)(k1) |
| .endif |
| .endm |
| |
| .macro set_saved_sp stackp temp temp2 |
| LONG_S \stackp, kernelsp |
| .endm |
| #endif |
| |
| .macro SAVE_SOME docfi=0 |
| .set push |
| .set noat |
| .set reorder |
| mfc0 k0, CP0_STATUS |
| sll k0, 3 /* extract cu0 bit */ |
| .set noreorder |
| bltz k0, 8f |
| move k0, sp |
| .if \docfi |
| .cfi_register sp, k0 |
| .endif |
| #ifdef CONFIG_EVA |
| /* |
| * Flush interAptiv's Return Prediction Stack (RPS) by writing |
| * EntryHi. Toggling Config7.RPS is slower and less portable. |
| * |
| * The RPS isn't automatically flushed when exceptions are |
| * taken, which can result in kernel mode speculative accesses |
| * to user addresses if the RPS mispredicts. That's harmless |
| * when user and kernel share the same address space, but with |
| * EVA the same user segments may be unmapped to kernel mode, |
| * even containing sensitive MMIO regions or invalid memory. |
| * |
| * This can happen when the kernel sets the return address to |
| * ret_from_* and jr's to the exception handler, which looks |
| * more like a tail call than a function call. If nested calls |
| * don't evict the last user address in the RPS, it will |
| * mispredict the return and fetch from a user controlled |
| * address into the icache. |
| * |
| * More recent EVA-capable cores with MAAR to restrict |
| * speculative accesses aren't affected. |
| */ |
| MFC0 k0, CP0_ENTRYHI |
| MTC0 k0, CP0_ENTRYHI |
| #endif |
| .set reorder |
| /* Called from user mode, new stack. */ |
| get_saved_sp docfi=\docfi tosp=1 |
| 8: |
| #ifdef CONFIG_CPU_DADDI_WORKAROUNDS |
| .set at=k1 |
| #endif |
| PTR_SUBU sp, PT_SIZE |
| #ifdef CONFIG_CPU_DADDI_WORKAROUNDS |
| .set noat |
| #endif |
| .if \docfi |
| .cfi_def_cfa sp,0 |
| .endif |
| cfi_st k0, PT_R29, \docfi |
| cfi_rel_offset sp, PT_R29, \docfi |
| cfi_st v1, PT_R3, \docfi |
| /* |
| * You might think that you don't need to save $0, |
| * but the FPU emulator and gdb remote debug stub |
| * need it to operate correctly |
| */ |
| LONG_S $0, PT_R0(sp) |
| mfc0 v1, CP0_STATUS |
| cfi_st v0, PT_R2, \docfi |
| LONG_S v1, PT_STATUS(sp) |
| cfi_st $4, PT_R4, \docfi |
| mfc0 v1, CP0_CAUSE |
| cfi_st $5, PT_R5, \docfi |
| LONG_S v1, PT_CAUSE(sp) |
| cfi_st $6, PT_R6, \docfi |
| cfi_st ra, PT_R31, \docfi |
| MFC0 ra, CP0_EPC |
| cfi_st $7, PT_R7, \docfi |
| #ifdef CONFIG_64BIT |
| cfi_st $8, PT_R8, \docfi |
| cfi_st $9, PT_R9, \docfi |
| #endif |
| LONG_S ra, PT_EPC(sp) |
| .if \docfi |
| .cfi_rel_offset ra, PT_EPC |
| .endif |
| cfi_st $25, PT_R25, \docfi |
| cfi_st $28, PT_R28, \docfi |
| |
| /* Set thread_info if we're coming from user mode */ |
| mfc0 k0, CP0_STATUS |
| sll k0, 3 /* extract cu0 bit */ |
| bltz k0, 9f |
| |
| ori $28, sp, _THREAD_MASK |
| xori $28, _THREAD_MASK |
| #ifdef CONFIG_CPU_CAVIUM_OCTEON |
| .set mips64 |
| pref 0, 0($28) /* Prefetch the current pointer */ |
| #endif |
| 9: |
| .set pop |
| .endm |
| |
| .macro SAVE_ALL docfi=0 |
| SAVE_SOME \docfi |
| SAVE_AT \docfi |
| SAVE_TEMP \docfi |
| SAVE_STATIC \docfi |
| .endm |
| |
| .macro RESTORE_AT docfi=0 |
| .set push |
| .set noat |
| cfi_ld $1, PT_R1, \docfi |
| .set pop |
| .endm |
| |
| .macro RESTORE_TEMP docfi=0 |
| #ifdef CONFIG_CPU_CAVIUM_OCTEON |
| /* Restore the Octeon multiplier state */ |
| jal octeon_mult_restore |
| #endif |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS |
| LONG_L $24, PT_ACX(sp) |
| mtlhx $24 |
| LONG_L $24, PT_HI(sp) |
| mtlhx $24 |
| LONG_L $24, PT_LO(sp) |
| mtlhx $24 |
| #elif !defined(CONFIG_CPU_MIPSR6) |
| LONG_L $24, PT_LO(sp) |
| mtlo $24 |
| LONG_L $24, PT_HI(sp) |
| mthi $24 |
| #endif |
| #ifdef CONFIG_32BIT |
| cfi_ld $8, PT_R8, \docfi |
| cfi_ld $9, PT_R9, \docfi |
| #endif |
| cfi_ld $10, PT_R10, \docfi |
| cfi_ld $11, PT_R11, \docfi |
| cfi_ld $12, PT_R12, \docfi |
| cfi_ld $13, PT_R13, \docfi |
| cfi_ld $14, PT_R14, \docfi |
| cfi_ld $15, PT_R15, \docfi |
| cfi_ld $24, PT_R24, \docfi |
| .endm |
| |
| .macro RESTORE_STATIC docfi=0 |
| cfi_ld $16, PT_R16, \docfi |
| cfi_ld $17, PT_R17, \docfi |
| cfi_ld $18, PT_R18, \docfi |
| cfi_ld $19, PT_R19, \docfi |
| cfi_ld $20, PT_R20, \docfi |
| cfi_ld $21, PT_R21, \docfi |
| cfi_ld $22, PT_R22, \docfi |
| cfi_ld $23, PT_R23, \docfi |
| cfi_ld $30, PT_R30, \docfi |
| .endm |
| |
| .macro RESTORE_SP docfi=0 |
| cfi_ld sp, PT_R29, \docfi |
| .endm |
| |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| |
| .macro RESTORE_SOME docfi=0 |
| .set push |
| .set reorder |
| .set noat |
| mfc0 a0, CP0_STATUS |
| li v1, ST0_CU1 | ST0_IM |
| ori a0, STATMASK |
| xori a0, STATMASK |
| mtc0 a0, CP0_STATUS |
| and a0, v1 |
| LONG_L v0, PT_STATUS(sp) |
| nor v1, $0, v1 |
| and v0, v1 |
| or v0, a0 |
| mtc0 v0, CP0_STATUS |
| cfi_ld $31, PT_R31, \docfi |
| cfi_ld $28, PT_R28, \docfi |
| cfi_ld $25, PT_R25, \docfi |
| cfi_ld $7, PT_R7, \docfi |
| cfi_ld $6, PT_R6, \docfi |
| cfi_ld $5, PT_R5, \docfi |
| cfi_ld $4, PT_R4, \docfi |
| cfi_ld $3, PT_R3, \docfi |
| cfi_ld $2, PT_R2, \docfi |
| .set pop |
| .endm |
| |
| .macro RESTORE_SP_AND_RET docfi=0 |
| .set push |
| .set noreorder |
| LONG_L k0, PT_EPC(sp) |
| RESTORE_SP \docfi |
| jr k0 |
| rfe |
| .set pop |
| .endm |
| |
| #else |
| .macro RESTORE_SOME docfi=0 |
| .set push |
| .set reorder |
| .set noat |
| mfc0 a0, CP0_STATUS |
| ori a0, STATMASK |
| xori a0, STATMASK |
| mtc0 a0, CP0_STATUS |
| li v1, ST0_CU1 | ST0_FR | ST0_IM |
| and a0, v1 |
| LONG_L v0, PT_STATUS(sp) |
| nor v1, $0, v1 |
| and v0, v1 |
| or v0, a0 |
| mtc0 v0, CP0_STATUS |
| LONG_L v1, PT_EPC(sp) |
| MTC0 v1, CP0_EPC |
| cfi_ld $31, PT_R31, \docfi |
| cfi_ld $28, PT_R28, \docfi |
| cfi_ld $25, PT_R25, \docfi |
| #ifdef CONFIG_64BIT |
| cfi_ld $8, PT_R8, \docfi |
| cfi_ld $9, PT_R9, \docfi |
| #endif |
| cfi_ld $7, PT_R7, \docfi |
| cfi_ld $6, PT_R6, \docfi |
| cfi_ld $5, PT_R5, \docfi |
| cfi_ld $4, PT_R4, \docfi |
| cfi_ld $3, PT_R3, \docfi |
| cfi_ld $2, PT_R2, \docfi |
| .set pop |
| .endm |
| |
| .macro RESTORE_SP_AND_RET docfi=0 |
| RESTORE_SP \docfi |
| #ifdef CONFIG_CPU_MIPSR6 |
| eretnc |
| #else |
| .set push |
| .set arch=r4000 |
| eret |
| .set pop |
| #endif |
| .endm |
| |
| #endif |
| |
| .macro RESTORE_ALL docfi=0 |
| RESTORE_TEMP \docfi |
| RESTORE_STATIC \docfi |
| RESTORE_AT \docfi |
| RESTORE_SOME \docfi |
| RESTORE_SP \docfi |
| .endm |
| |
| /* |
| * Move to kernel mode and disable interrupts. |
| * Set cp0 enable bit as sign that we're running on the kernel stack |
| */ |
| .macro CLI |
| mfc0 t0, CP0_STATUS |
| li t1, ST0_CU0 | STATMASK |
| or t0, t1 |
| xori t0, STATMASK |
| mtc0 t0, CP0_STATUS |
| irq_disable_hazard |
| .endm |
| |
| /* |
| * Move to kernel mode and enable interrupts. |
| * Set cp0 enable bit as sign that we're running on the kernel stack |
| */ |
| .macro STI |
| mfc0 t0, CP0_STATUS |
| li t1, ST0_CU0 | STATMASK |
| or t0, t1 |
| xori t0, STATMASK & ~1 |
| mtc0 t0, CP0_STATUS |
| irq_enable_hazard |
| .endm |
| |
| /* |
| * Just move to kernel mode and leave interrupts as they are. Note |
| * for the R3000 this means copying the previous enable from IEp. |
| * Set cp0 enable bit as sign that we're running on the kernel stack |
| */ |
| .macro KMODE |
| mfc0 t0, CP0_STATUS |
| li t1, ST0_CU0 | (STATMASK & ~1) |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| andi t2, t0, ST0_IEP |
| srl t2, 2 |
| or t0, t2 |
| #endif |
| or t0, t1 |
| xori t0, STATMASK & ~1 |
| mtc0 t0, CP0_STATUS |
| irq_disable_hazard |
| .endm |
| |
| #endif /* _ASM_STACKFRAME_H */ |
