blob: fd3d8374520885a77de9ab2a36e25bb51f0b2eb9 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Xilinx Zynq MPSoC Firmware layer
*
* Copyright (C) 2014-2018 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Davorin Mista <davorin.mista@aggios.com>
* Jolly Shah <jollys@xilinx.com>
* Rajan Vaja <rajanv@xilinx.com>
*/
#include <linux/arm-smccc.h>
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/firmware/xlnx-zynqmp.h>
#include "zynqmp-debug.h"
static const struct zynqmp_eemi_ops *eemi_ops_tbl;
static const struct mfd_cell firmware_devs[] = {
{
.name = "zynqmp_power_controller",
},
};
/**
* zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
* @ret_status: PMUFW return code
*
* Return: corresponding Linux error code
*/
static int zynqmp_pm_ret_code(u32 ret_status)
{
switch (ret_status) {
case XST_PM_SUCCESS:
case XST_PM_DOUBLE_REQ:
return 0;
case XST_PM_NO_ACCESS:
return -EACCES;
case XST_PM_ABORT_SUSPEND:
return -ECANCELED;
case XST_PM_INTERNAL:
case XST_PM_CONFLICT:
case XST_PM_INVALID_NODE:
default:
return -EINVAL;
}
}
static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
return -ENODEV;
}
/*
* PM function call wrapper
* Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
*/
static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
/**
* do_fw_call_smc() - Call system-level platform management layer (SMC)
* @arg0: Argument 0 to SMC call
* @arg1: Argument 1 to SMC call
* @arg2: Argument 2 to SMC call
* @ret_payload: Returned value array
*
* Invoke platform management function via SMC call (no hypervisor present).
*
* Return: Returns status, either success or error+reason
*/
static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
struct arm_smccc_res res;
arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
if (ret_payload) {
ret_payload[0] = lower_32_bits(res.a0);
ret_payload[1] = upper_32_bits(res.a0);
ret_payload[2] = lower_32_bits(res.a1);
ret_payload[3] = upper_32_bits(res.a1);
}
return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
}
/**
* do_fw_call_hvc() - Call system-level platform management layer (HVC)
* @arg0: Argument 0 to HVC call
* @arg1: Argument 1 to HVC call
* @arg2: Argument 2 to HVC call
* @ret_payload: Returned value array
*
* Invoke platform management function via HVC
* HVC-based for communication through hypervisor
* (no direct communication with ATF).
*
* Return: Returns status, either success or error+reason
*/
static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
struct arm_smccc_res res;
arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
if (ret_payload) {
ret_payload[0] = lower_32_bits(res.a0);
ret_payload[1] = upper_32_bits(res.a0);
ret_payload[2] = lower_32_bits(res.a1);
ret_payload[3] = upper_32_bits(res.a1);
}
return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
}
/**
* zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
* caller function depending on the configuration
* @pm_api_id: Requested PM-API call
* @arg0: Argument 0 to requested PM-API call
* @arg1: Argument 1 to requested PM-API call
* @arg2: Argument 2 to requested PM-API call
* @arg3: Argument 3 to requested PM-API call
* @ret_payload: Returned value array
*
* Invoke platform management function for SMC or HVC call, depending on
* configuration.
* Following SMC Calling Convention (SMCCC) for SMC64:
* Pm Function Identifier,
* PM_SIP_SVC + PM_API_ID =
* ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
* ((SMC_64) << FUNCID_CC_SHIFT)
* ((SIP_START) << FUNCID_OEN_SHIFT)
* ((PM_API_ID) & FUNCID_NUM_MASK))
*
* PM_SIP_SVC - Registered ZynqMP SIP Service Call.
* PM_API_ID - Platform Management API ID.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload)
{
/*
* Added SIP service call Function Identifier
* Make sure to stay in x0 register
*/
u64 smc_arg[4];
smc_arg[0] = PM_SIP_SVC | pm_api_id;
smc_arg[1] = ((u64)arg1 << 32) | arg0;
smc_arg[2] = ((u64)arg3 << 32) | arg2;
return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
}
static u32 pm_api_version;
static u32 pm_tz_version;
/**
* zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
* @version: Returned version value
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_get_api_version(u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!version)
return -EINVAL;
/* Check is PM API version already verified */
if (pm_api_version > 0) {
*version = pm_api_version;
return 0;
}
ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
*version = ret_payload[1];
return ret;
}
/**
* zynqmp_pm_get_chipid - Get silicon ID registers
* @idcode: IDCODE register
* @version: version register
*
* Return: Returns the status of the operation and the idcode and version
* registers in @idcode and @version.
*/
static int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!idcode || !version)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
*idcode = ret_payload[1];
*version = ret_payload[2];
return ret;
}
/**
* zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
* @version: Returned version value
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_get_trustzone_version(u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!version)
return -EINVAL;
/* Check is PM trustzone version already verified */
if (pm_tz_version > 0) {
*version = pm_tz_version;
return 0;
}
ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
0, 0, ret_payload);
*version = ret_payload[1];
return ret;
}
/**
* get_set_conduit_method() - Choose SMC or HVC based communication
* @np: Pointer to the device_node structure
*
* Use SMC or HVC-based functions to communicate with EL2/EL3.
*
* Return: Returns 0 on success or error code
*/
static int get_set_conduit_method(struct device_node *np)
{
const char *method;
if (of_property_read_string(np, "method", &method)) {
pr_warn("%s missing \"method\" property\n", __func__);
return -ENXIO;
}
if (!strcmp("hvc", method)) {
do_fw_call = do_fw_call_hvc;
} else if (!strcmp("smc", method)) {
do_fw_call = do_fw_call_smc;
} else {
pr_warn("%s Invalid \"method\" property: %s\n",
__func__, method);
return -EINVAL;
}
return 0;
}
/**
* zynqmp_pm_query_data() - Get query data from firmware
* @qdata: Variable to the zynqmp_pm_query_data structure
* @out: Returned output value
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
{
int ret;
ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
qdata.arg2, qdata.arg3, out);
/*
* For clock name query, all bytes in SMC response are clock name
* characters and return code is always success. For invalid clocks,
* clock name bytes would be zeros.
*/
return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
}
/**
* zynqmp_pm_clock_enable() - Enable the clock for given id
* @clock_id: ID of the clock to be enabled
*
* This function is used by master to enable the clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_enable(u32 clock_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
}
/**
* zynqmp_pm_clock_disable() - Disable the clock for given id
* @clock_id: ID of the clock to be disable
*
* This function is used by master to disable the clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_disable(u32 clock_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
}
/**
* zynqmp_pm_clock_getstate() - Get the clock state for given id
* @clock_id: ID of the clock to be queried
* @state: 1/0 (Enabled/Disabled)
*
* This function is used by master to get the state of clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
0, 0, ret_payload);
*state = ret_payload[1];
return ret;
}
/**
* zynqmp_pm_clock_setdivider() - Set the clock divider for given id
* @clock_id: ID of the clock
* @divider: divider value
*
* This function is used by master to set divider for any clock
* to achieve desired rate.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
0, 0, NULL);
}
/**
* zynqmp_pm_clock_getdivider() - Get the clock divider for given id
* @clock_id: ID of the clock
* @divider: divider value
*
* This function is used by master to get divider values
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
0, 0, ret_payload);
*divider = ret_payload[1];
return ret;
}
/**
* zynqmp_pm_clock_setrate() - Set the clock rate for given id
* @clock_id: ID of the clock
* @rate: rate value in hz
*
* This function is used by master to set rate for any clock.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
lower_32_bits(rate),
upper_32_bits(rate),
0, NULL);
}
/**
* zynqmp_pm_clock_getrate() - Get the clock rate for given id
* @clock_id: ID of the clock
* @rate: rate value in hz
*
* This function is used by master to get rate
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
0, 0, ret_payload);
*rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
return ret;
}
/**
* zynqmp_pm_clock_setparent() - Set the clock parent for given id
* @clock_id: ID of the clock
* @parent_id: parent id
*
* This function is used by master to set parent for any clock.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
parent_id, 0, 0, NULL);
}
/**
* zynqmp_pm_clock_getparent() - Get the clock parent for given id
* @clock_id: ID of the clock
* @parent_id: parent id
*
* This function is used by master to get parent index
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
0, 0, ret_payload);
*parent_id = ret_payload[1];
return ret;
}
/**
* zynqmp_is_valid_ioctl() - Check whether IOCTL ID is valid or not
* @ioctl_id: IOCTL ID
*
* Return: 1 if IOCTL is valid else 0
*/
static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
{
switch (ioctl_id) {
case IOCTL_SET_PLL_FRAC_MODE:
case IOCTL_GET_PLL_FRAC_MODE:
case IOCTL_SET_PLL_FRAC_DATA:
case IOCTL_GET_PLL_FRAC_DATA:
return 1;
default:
return 0;
}
}
/**
* zynqmp_pm_ioctl() - PM IOCTL API for device control and configs
* @node_id: Node ID of the device
* @ioctl_id: ID of the requested IOCTL
* @arg1: Argument 1 to requested IOCTL call
* @arg2: Argument 2 to requested IOCTL call
* @out: Returned output value
*
* This function calls IOCTL to firmware for device control and configuration.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2,
u32 *out)
{
if (!zynqmp_is_valid_ioctl(ioctl_id))
return -EINVAL;
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, ioctl_id,
arg1, arg2, out);
}
/**
* zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
* @reset: Reset to be configured
* @assert_flag: Flag stating should reset be asserted (1) or
* released (0)
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag)
{
return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
0, 0, NULL);
}
/**
* zynqmp_pm_reset_get_status - Get status of the reset
* @reset: Reset whose status should be returned
* @status: Returned status
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
u32 *status)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!status)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
0, 0, ret_payload);
*status = ret_payload[1];
return ret;
}
/**
* zynqmp_pm_fpga_load - Perform the fpga load
* @address: Address to write to
* @size: pl bitstream size
* @flags: Bitstream type
* -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
* -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
*
* This function provides access to pmufw. To transfer
* the required bitstream into PL.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
const u32 flags)
{
return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
upper_32_bits(address), size, flags, NULL);
}
/**
* zynqmp_pm_fpga_get_status - Read value from PCAP status register
* @value: Value to read
*
* This function provides access to the pmufw to get the PCAP
* status
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_fpga_get_status(u32 *value)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!value)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
*value = ret_payload[1];
return ret;
}
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
*
* This API function is to be used for notify the power management controller
* about the completed power management initialization.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_init_finalize(void)
{
return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
}
/**
* zynqmp_pm_set_suspend_mode() - Set system suspend mode
* @mode: Mode to set for system suspend
*
* This API function is used to set mode of system suspend.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_set_suspend_mode(u32 mode)
{
return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
}
/**
* zynqmp_pm_request_node() - Request a node with specific capabilities
* @node: Node ID of the slave
* @capabilities: Requested capabilities of the slave
* @qos: Quality of service (not supported)
* @ack: Flag to specify whether acknowledge is requested
*
* This function is used by master to request particular node from firmware.
* Every master must request node before using it.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack)
{
return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities,
qos, ack, NULL);
}
/**
* zynqmp_pm_release_node() - Release a node
* @node: Node ID of the slave
*
* This function is used by master to inform firmware that master
* has released node. Once released, master must not use that node
* without re-request.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_release_node(const u32 node)
{
return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL);
}
/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
* @capabilities: Requested capabilities of the slave
* @qos: Quality of service (not supported)
* @ack: Flag to specify whether acknowledge is requested
*
* This API function is to be used for slaves a PU already has requested
* to change its capabilities.
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack)
{
return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities,
qos, ack, NULL);
}
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.get_chipid = zynqmp_pm_get_chipid,
.query_data = zynqmp_pm_query_data,
.clock_enable = zynqmp_pm_clock_enable,
.clock_disable = zynqmp_pm_clock_disable,
.clock_getstate = zynqmp_pm_clock_getstate,
.clock_setdivider = zynqmp_pm_clock_setdivider,
.clock_getdivider = zynqmp_pm_clock_getdivider,
.clock_setrate = zynqmp_pm_clock_setrate,
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
.ioctl = zynqmp_pm_ioctl,
.reset_assert = zynqmp_pm_reset_assert,
.reset_get_status = zynqmp_pm_reset_get_status,
.init_finalize = zynqmp_pm_init_finalize,
.set_suspend_mode = zynqmp_pm_set_suspend_mode,
.request_node = zynqmp_pm_request_node,
.release_node = zynqmp_pm_release_node,
.set_requirement = zynqmp_pm_set_requirement,
.fpga_load = zynqmp_pm_fpga_load,
.fpga_get_status = zynqmp_pm_fpga_get_status,
};
/**
* zynqmp_pm_get_eemi_ops - Get eemi ops functions
*
* Return: Pointer of eemi_ops structure
*/
const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
if (eemi_ops_tbl)
return eemi_ops_tbl;
else
return ERR_PTR(-EPROBE_DEFER);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops);
static int zynqmp_firmware_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
int ret;
np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
if (!np)
return 0;
of_node_put(np);
ret = get_set_conduit_method(dev->of_node);
if (ret)
return ret;
/* Check PM API version number */
zynqmp_pm_get_api_version(&pm_api_version);
if (pm_api_version < ZYNQMP_PM_VERSION) {
panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n",
__func__,
ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR,
pm_api_version >> 16, pm_api_version & 0xFFFF);
}
pr_info("%s Platform Management API v%d.%d\n", __func__,
pm_api_version >> 16, pm_api_version & 0xFFFF);
/* Check trustzone version number */
ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
if (ret)
panic("Legacy trustzone found without version support\n");
if (pm_tz_version < ZYNQMP_TZ_VERSION)
panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n",
__func__,
ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR,
pm_tz_version >> 16, pm_tz_version & 0xFFFF);
pr_info("%s Trustzone version v%d.%d\n", __func__,
pm_tz_version >> 16, pm_tz_version & 0xFFFF);
/* Assign eemi_ops_table */
eemi_ops_tbl = &eemi_ops;
zynqmp_pm_api_debugfs_init();
ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
ARRAY_SIZE(firmware_devs), NULL, 0, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret);
return ret;
}
return of_platform_populate(dev->of_node, NULL, NULL, dev);
}
static int zynqmp_firmware_remove(struct platform_device *pdev)
{
mfd_remove_devices(&pdev->dev);
zynqmp_pm_api_debugfs_exit();
return 0;
}
static const struct of_device_id zynqmp_firmware_of_match[] = {
{.compatible = "xlnx,zynqmp-firmware"},
{},
};
MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
static struct platform_driver zynqmp_firmware_driver = {
.driver = {
.name = "zynqmp_firmware",
.of_match_table = zynqmp_firmware_of_match,
},
.probe = zynqmp_firmware_probe,
.remove = zynqmp_firmware_remove,
};
module_platform_driver(zynqmp_firmware_driver);