blob: b8fde61bb5d820a8aa22743a184ecbb7256f9fa1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Intel CHT Whiskey Cove PMIC I2C Master driver
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
*
* Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
* Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved.
*/
#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power/bq24190_charger.h>
#include <linux/slab.h>
#define CHT_WC_I2C_CTRL 0x5e24
#define CHT_WC_I2C_CTRL_WR BIT(0)
#define CHT_WC_I2C_CTRL_RD BIT(1)
#define CHT_WC_I2C_CLIENT_ADDR 0x5e25
#define CHT_WC_I2C_REG_OFFSET 0x5e26
#define CHT_WC_I2C_WRDATA 0x5e27
#define CHT_WC_I2C_RDDATA 0x5e28
#define CHT_WC_EXTCHGRIRQ 0x6e0a
#define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ BIT(0)
#define CHT_WC_EXTCHGRIRQ_WRITE_IRQ BIT(1)
#define CHT_WC_EXTCHGRIRQ_READ_IRQ BIT(2)
#define CHT_WC_EXTCHGRIRQ_NACK_IRQ BIT(3)
#define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK ((u8)GENMASK(3, 1))
#define CHT_WC_EXTCHGRIRQ_MSK 0x6e17
struct cht_wc_i2c_adap {
struct i2c_adapter adapter;
wait_queue_head_t wait;
struct irq_chip irqchip;
struct mutex adap_lock;
struct mutex irqchip_lock;
struct regmap *regmap;
struct irq_domain *irq_domain;
struct i2c_client *client;
int client_irq;
u8 irq_mask;
u8 old_irq_mask;
int read_data;
bool io_error;
bool done;
};
static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data)
{
struct cht_wc_i2c_adap *adap = data;
int ret, reg;
mutex_lock(&adap->adap_lock);
/* Read IRQs */
ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, &reg);
if (ret) {
dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n");
mutex_unlock(&adap->adap_lock);
return IRQ_NONE;
}
reg &= ~adap->irq_mask;
/* Reads must be acked after reading the received data. */
ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data);
if (ret)
adap->io_error = true;
/*
* Immediately ack IRQs, so that if new IRQs arrives while we're
* handling the previous ones our irq will re-trigger when we're done.
*/
ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg);
if (ret)
dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n");
if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) {
adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ);
adap->done = true;
}
mutex_unlock(&adap->adap_lock);
if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK)
wake_up(&adap->wait);
/*
* Do NOT use handle_nested_irq here, the client irq handler will
* likely want to do i2c transfers and the i2c controller uses this
* interrupt handler as well, so running the client irq handler from
* this thread will cause things to lock up.
*/
if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) {
/*
* generic_handle_irq expects local IRQs to be disabled
* as normally it is called from interrupt context.
*/
local_irq_disable();
generic_handle_irq(adap->client_irq);
local_irq_enable();
}
return IRQ_HANDLED;
}
static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap)
{
/* This i2c adapter only supports SMBUS byte transfers */
return I2C_FUNC_SMBUS_BYTE_DATA;
}
static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size,
union i2c_smbus_data *data)
{
struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap);
int ret;
mutex_lock(&adap->adap_lock);
adap->io_error = false;
adap->done = false;
mutex_unlock(&adap->adap_lock);
ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr);
if (ret)
return ret;
if (read_write == I2C_SMBUS_WRITE) {
ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte);
if (ret)
return ret;
}
ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command);
if (ret)
return ret;
ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL,
(read_write == I2C_SMBUS_WRITE) ?
CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD);
if (ret)
return ret;
ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30));
if (ret == 0) {
/*
* The CHT GPIO controller serializes all IRQs, sometimes
* causing significant delays, check status manually.
*/
cht_wc_i2c_adap_thread_handler(0, adap);
if (!adap->done)
return -ETIMEDOUT;
}
ret = 0;
mutex_lock(&adap->adap_lock);
if (adap->io_error)
ret = -EIO;
else if (read_write == I2C_SMBUS_READ)
data->byte = adap->read_data;
mutex_unlock(&adap->adap_lock);
return ret;
}
static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
.functionality = cht_wc_i2c_adap_master_func,
.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
};
/*
* We are an i2c-adapter which itself is part of an i2c-client. This means that
* transfers done through us take adapter->bus_lock twice, once for our parent
* i2c-adapter and once to take our own bus_lock. Lockdep does not like this
* nested locking, to make lockdep happy in the case of busses with muxes, the
* i2c-core's i2c_adapter_lock_bus function calls:
* rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
*
* But i2c_adapter_depth only works when the direct parent of the adapter is
* another adapter, as it is only meant for muxes. In our case there is an
* i2c-client and MFD instantiated platform_device in the parent->child chain
* between the 2 devices.
*
* So we override the default i2c_lock_operations and pass a hardcoded
* depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
*
* Note that if there were to be a mux attached to our adapter, this would
* break things again since the i2c-mux code expects the root-adapter to have
* a locking depth of 0. But we always have only 1 client directly attached
* in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
*/
static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
unsigned int flags)
{
rt_mutex_lock_nested(&adapter->bus_lock, 1);
}
static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
unsigned int flags)
{
return rt_mutex_trylock(&adapter->bus_lock);
}
static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
unsigned int flags)
{
rt_mutex_unlock(&adapter->bus_lock);
}
static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
.lock_bus = cht_wc_i2c_adap_lock_bus,
.trylock_bus = cht_wc_i2c_adap_trylock_bus,
.unlock_bus = cht_wc_i2c_adap_unlock_bus,
};
/**** irqchip for the client connected to the extchgr i2c adapter ****/
static void cht_wc_i2c_irq_lock(struct irq_data *data)
{
struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
mutex_lock(&adap->irqchip_lock);
}
static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data)
{
struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
int ret;
if (adap->irq_mask != adap->old_irq_mask) {
ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK,
adap->irq_mask);
if (ret == 0)
adap->old_irq_mask = adap->irq_mask;
else
dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n");
}
mutex_unlock(&adap->irqchip_lock);
}
static void cht_wc_i2c_irq_enable(struct irq_data *data)
{
struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
}
static void cht_wc_i2c_irq_disable(struct irq_data *data)
{
struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
}
static const struct irq_chip cht_wc_i2c_irq_chip = {
.irq_bus_lock = cht_wc_i2c_irq_lock,
.irq_bus_sync_unlock = cht_wc_i2c_irq_sync_unlock,
.irq_disable = cht_wc_i2c_irq_disable,
.irq_enable = cht_wc_i2c_irq_enable,
.name = "cht_wc_ext_chrg_irq_chip",
};
static const char * const bq24190_suppliers[] = {
"tcpm-source-psy-i2c-fusb302" };
static const struct property_entry bq24190_props[] = {
PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
PROPERTY_ENTRY_BOOL("omit-battery-class"),
PROPERTY_ENTRY_BOOL("disable-reset"),
{ }
};
static struct regulator_consumer_supply fusb302_consumer = {
.supply = "vbus",
/* Must match fusb302 dev_name in intel_cht_int33fe.c */
.dev_name = "i2c-fusb302",
};
static const struct regulator_init_data bq24190_vbus_init_data = {
.constraints = {
/* The name is used in intel_cht_int33fe.c do not change. */
.name = "cht_wc_usb_typec_vbus",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.consumer_supplies = &fusb302_consumer,
.num_consumer_supplies = 1,
};
static struct bq24190_platform_data bq24190_pdata = {
.regulator_init_data = &bq24190_vbus_init_data,
};
static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
struct cht_wc_i2c_adap *adap;
struct i2c_board_info board_info = {
.type = "bq24190",
.addr = 0x6b,
.dev_name = "bq24190",
.properties = bq24190_props,
.platform_data = &bq24190_pdata,
};
int ret, reg, irq;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "Error missing irq resource\n");
return -EINVAL;
}
adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
if (!adap)
return -ENOMEM;
init_waitqueue_head(&adap->wait);
mutex_init(&adap->adap_lock);
mutex_init(&adap->irqchip_lock);
adap->irqchip = cht_wc_i2c_irq_chip;
adap->regmap = pmic->regmap;
adap->adapter.owner = THIS_MODULE;
adap->adapter.class = I2C_CLASS_HWMON;
adap->adapter.algo = &cht_wc_i2c_adap_algo;
adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
strlcpy(adap->adapter.name, "PMIC I2C Adapter",
sizeof(adap->adapter.name));
adap->adapter.dev.parent = &pdev->dev;
/* Clear and activate i2c-adapter interrupts, disable client IRQ */
adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK;
ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &reg);
if (ret)
return ret;
ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask);
if (ret)
return ret;
ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask);
if (ret)
return ret;
/* Alloc and register client IRQ */
adap->irq_domain = irq_domain_add_linear(pdev->dev.of_node, 1,
&irq_domain_simple_ops, NULL);
if (!adap->irq_domain)
return -ENOMEM;
adap->client_irq = irq_create_mapping(adap->irq_domain, 0);
if (!adap->client_irq) {
ret = -ENOMEM;
goto remove_irq_domain;
}
irq_set_chip_data(adap->client_irq, adap);
irq_set_chip_and_handler(adap->client_irq, &adap->irqchip,
handle_simple_irq);
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
cht_wc_i2c_adap_thread_handler,
IRQF_ONESHOT, "PMIC I2C Adapter", adap);
if (ret)
goto remove_irq_domain;
i2c_set_adapdata(&adap->adapter, adap);
ret = i2c_add_adapter(&adap->adapter);
if (ret)
goto remove_irq_domain;
/*
* Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
* connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
* USB Type-C controller connected to another i2c bus. In this setup
* the max17047 and fusb302 devices are enumerated through an INT33FE
* ACPI device. If this device is present register an i2c-client for
* the TI bq24292i charger.
*/
if (acpi_dev_present("INT33FE", NULL, -1)) {
board_info.irq = adap->client_irq;
adap->client = i2c_new_device(&adap->adapter, &board_info);
if (!adap->client) {
ret = -ENOMEM;
goto del_adapter;
}
}
platform_set_drvdata(pdev, adap);
return 0;
del_adapter:
i2c_del_adapter(&adap->adapter);
remove_irq_domain:
irq_domain_remove(adap->irq_domain);
return ret;
}
static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
{
struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
i2c_unregister_device(adap->client);
i2c_del_adapter(&adap->adapter);
irq_domain_remove(adap->irq_domain);
return 0;
}
static const struct platform_device_id cht_wc_i2c_adap_id_table[] = {
{ .name = "cht_wcove_ext_chgr" },
{},
};
MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table);
static struct platform_driver cht_wc_i2c_adap_driver = {
.probe = cht_wc_i2c_adap_i2c_probe,
.remove = cht_wc_i2c_adap_i2c_remove,
.driver = {
.name = "cht_wcove_ext_chgr",
},
.id_table = cht_wc_i2c_adap_id_table,
};
module_platform_driver(cht_wc_i2c_adap_driver);
MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");