Documentation/devicetree/bindings/media/i2c/adv7604.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices ADV7604/11/12 video decoder with HDMI receiver

maintainers:
  - Hans Verkuil <hverkuil-cisco@xs4all.nl>

description:
  The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated
  HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
  input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
  similar to the 7611 but has 2 HDMI inputs.

  These device tree bindings support the ADV7611/12 only at the moment.

properties:
  compatible:
    items:
      - enum:
          - adi,adv7611
          - adi,adv7612

  reg:
    minItems: 1
    maxItems: 13

  reg-names:
    minItems: 1
    maxItems: 13
    items:
      - const: main
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]

  interrupts:
    maxItems: 1

  reset-gpios:
    maxItems: 1

  hpd-gpios:
    minItems: 1
    description:
      References to the GPIOs that control the HDMI hot-plug detection pins,
      one per HDMI input. The active flag indicates the GPIO level that
      enables hot-plug detection.

  default-input:
    maxItems: 1
    description:
      Select which input is selected after reset.

  ports: true

required:
  - compatible
  - reg
  - ports

additionalProperties: false

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: adi,adv7611
    then:
      properties:
        ports:
          $ref: /schemas/graph.yaml#/properties/ports
          properties:
            port@0:
              $ref: /schemas/graph.yaml#/properties/port
              description: Input port

            port@1:
              $ref: /schemas/graph.yaml#/properties/port
              description: Output port

          required:
            - port@1

  - if:
      properties:
        compatible:
          contains:
            const: adi,adv7612
    then:
      properties:
        ports:
          $ref: /schemas/graph.yaml#/properties/ports
          properties:
            port@2:
              $ref: /schemas/graph.yaml#/properties/port
              description: Output port

          patternProperties:
            "^port@[0-1]$":
              $ref: /schemas/graph.yaml#/properties/port
              description: Input port

          required:
            - port@2

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    i2c {
            #address-cells = <1>;
            #size-cells = <0>;

            hdmi_receiver@4c {
                    compatible = "adi,adv7611";
                    /*
                     * The edid page will be accessible @ 0x66 on the I2C bus. All
                     * other maps will retain their default addresses.
                     */
                    reg = <0x4c>, <0x66>;
                    reg-names = "main", "edid";

                    reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
                    hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
                    default-input = <0>;

                    ports {
                            #address-cells = <1>;
                            #size-cells = <0>;

                            port@0 {
                                    reg = <0>;
                            };

                            port@1 {
                                    reg = <1>;
                                    hdmi_in: endpoint {
                                            remote-endpoint = <&ccdc_in>;
                                    };
                            };
                    };


            };
    };