# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Intel Lightning Mountain SoC pinmux & GPIO controller binding

maintainers:
  - Rahul Tanwar <rahul.tanwar@linux.intel.com>

description: |
  Pinmux & GPIO controller controls pin multiplexing & configuration including
  GPIO function selection & GPIO attributes configuration.

  Please refer to [1] for details of the common pinctrl bindings used by the
  client devices.

  [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

properties:
  compatible:
    const: intel,lgm-io

  reg:
    maxItems: 1

# Client device subnode's properties
patternProperties:
  '-pins$':
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.

    properties:
      function:
        $ref: /schemas/types.yaml#/definitions/string
        description:
          A string containing the name of the function to mux to the group.

      groups:
        $ref: /schemas/types.yaml#/definitions/string-array
        description:
          An array of strings identifying the list of groups.

      pins:
        $ref: /schemas/types.yaml#/definitions/uint32-array
        description:
          List of pins to select with this function.

      pinmux:
        description: The applicable mux group.
        allOf:
          - $ref: "/schemas/types.yaml#/definitions/uint32-array"

      bias-pull-up:
        type: boolean

      bias-pull-down:
        type: boolean

      drive-strength:
        description: |
          Selects the drive strength for the specified pins in mA.
          0: 2 mA
          1: 4 mA
          2: 8 mA
          3: 12 mA
        allOf:
          - $ref: /schemas/types.yaml#/definitions/uint32
          - enum: [0, 1, 2, 3]

      slew-rate:
        type: boolean
        description: |
          Sets slew rate for specified pins.
          0: slow slew
          1: fast slew

      drive-open-drain:
        type: boolean

      output-enable:
        type: boolean

    required:
      - function
      - groups

    additionalProperties: false

required:
  - compatible
  - reg

additionalProperties: false

examples:
  # Pinmux controller node
  - |
    pinctrl: pinctrl@e2880000 {
        compatible = "intel,lgm-pinctrl";
        reg = <0xe2880000 0x100000>;

        uart0-pins {
             pins = <64>, /* UART_RX0 */
                    <65>; /* UART_TX0 */
             function = "CONSOLE_UART0";
             pinmux = <1>,
                      <1>;
             groups = "CONSOLE_UART0";
          };
    };

...