Generic cpufreq driver

It is a generic DT based cpufreq driver for frequency management.  It supports
both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
clock and voltage across all CPUs.

Both required and optional properties listed below must be defined
under node /cpus/cpu@0.

Required properties:
- None

Optional properties:
- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
  details. OPPs *must* be supplied either via DT, i.e. this property, or
  populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
  in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
- #cooling-cells:
     Please refer to
     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.

Examples:

cpus {
	#address-cells = <1>;
	#size-cells = <0>;

	cpu@0 {
		compatible = "arm,cortex-a9";
		reg = <0>;
		next-level-cache = <&L2>;
		operating-points = <
			/* kHz    uV */
			792000  1100000
			396000  950000
			198000  850000
		>;
		clock-latency = <61036>; /* two CLK32 periods */
		#cooling-cells = <2>;
	};

	cpu@1 {
		compatible = "arm,cortex-a9";
		reg = <1>;
		next-level-cache = <&L2>;
	};

	cpu@2 {
		compatible = "arm,cortex-a9";
		reg = <2>;
		next-level-cache = <&L2>;
	};

	cpu@3 {
		compatible = "arm,cortex-a9";
		reg = <3>;
		next-level-cache = <&L2>;
	};
};