# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Thine Electronics THC63LVD1024 LVDS Decoder

maintainers:
  - Jacopo Mondi <jacopo+renesas@jmondi.org>
  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

description: |
  The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
  streams to parallel data outputs. The chip supports single/dual input/output
  modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
  outputs.

  Single or dual operation mode, output data mapping and DDR output modes are
  configured through input signals and the chip does not expose any control
  bus.

properties:
  compatible:
    const: thine,thc63lvd1024

  ports:
    type: object
    description: |
      This device has four video ports. Their connections are modeled using the
      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.

      The device can operate in single-link mode or dual-link mode. In
      single-link mode, all pixels are received on port@0, and port@1 shall not
      contain any endpoint. In dual-link mode, even-numbered pixels are
      received on port@0 and odd-numbered pixels on port@1, and both port@0 and
      port@1 shall contain endpoints.

    properties:
      '#address-cells':
        const: 1

      '#size-cells':
        const: 0

      port@0:
        type: object
        description: First LVDS input port

      port@1:
        type: object
        description: Second LVDS input port

      port@2:
        type: object
        description: First digital CMOS/TTL parallel output

      port@3:
        type: object
        description: Second digital CMOS/TTL parallel output

    required:
      - port@0
      - port@2

    additionalProperties: false

  oe-gpios:
    maxItems: 1
    description: Output enable GPIO signal, pin name "OE", active high.

  powerdown-gpios:
    maxItems: 1
    description: Power down GPIO signal, pin name "/PDWN", active low.

  vcc-supply:
    description:
      Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
      digital circuitry.

required:
  - compatible
  - ports
  - vcc-supply

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    lvds-decoder {
        compatible = "thine,thc63lvd1024";

        vcc-supply = <&reg_lvds_vcc>;
        powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;

                lvds_dec_in_0: endpoint {
                    remote-endpoint = <&lvds_out>;
                };
            };

            port@2 {
                reg = <2>;

                lvds_dec_out_2: endpoint {
                    remote-endpoint = <&adv7511_in>;
                };
            };
        };
    };

...