diff --git a/.mailmap b/.mailmap
index e7f0341..1fd03c7 100644
--- a/.mailmap
+++ b/.mailmap
@@ -156,6 +156,7 @@
 Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
+Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Mathieu Othacehe <m.othacehe@gmail.com>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
 Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
diff --git a/CREDITS b/CREDITS
index 031605d..9602b0f 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1875,8 +1875,9 @@
 
 N: Martin Kepplinger
 E: martink@posteo.de
-E: martin.kepplinger@ginzinger.com
+E: martin.kepplinger@puri.sm
 W: http://www.martinkepplinger.com
+P: 4096R/5AB387D3 F208 2B88 0F9E 4239 3468  6E3F 5003 98DF 5AB3 87D3
 D: mma8452 accelerators iio driver
 D: pegasus_notetaker input driver
 D: Kernel fixes and cleanups
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 36258bc..614874e 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -1,4 +1,4 @@
-What:		/sys/bus/coresight/devices/<memory_map>.etm/enable_source
+What:		/sys/bus/coresight/devices/etm<N>/enable_source
 Date:		April 2015
 KernelVersion:  4.01
 Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -8,82 +8,82 @@
 		of coresight components linking the source to the sink is
 		configured and managed automatically by the coresight framework.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cpu
+What:		/sys/bus/coresight/devices/etm<N>/cpu
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) The CPU this tracing entity is associated with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_pe_cmp
+What:		/sys/bus/coresight/devices/etm<N>/nr_pe_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of PE comparator inputs that are
 		available for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_addr_cmp
+What:		/sys/bus/coresight/devices/etm<N>/nr_addr_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of address comparator pairs that are
 		available for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_cntr
+What:		/sys/bus/coresight/devices/etm<N>/nr_cntr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of counters that are available for
 		tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_ext_inp
+What:		/sys/bus/coresight/devices/etm<N>/nr_ext_inp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates how many external inputs are implemented.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/numcidc
+What:		/sys/bus/coresight/devices/etm<N>/numcidc
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of Context ID comparators that are
 		available for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/numvmidc
+What:		/sys/bus/coresight/devices/etm<N>/numvmidc
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of VMID comparators that are available
 		for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nrseqstate
+What:		/sys/bus/coresight/devices/etm<N>/nrseqstate
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of sequencer states that are
 		implemented.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_resource
+What:		/sys/bus/coresight/devices/etm<N>/nr_resource
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of resource selection pairs that are
 		available for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_ss_cmp
+What:		/sys/bus/coresight/devices/etm<N>/nr_ss_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Indicates the number of single-shot comparator controls that
 		are available for tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/reset
+What:		/sys/bus/coresight/devices/etm<N>/reset
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(W) Cancels all configuration on a trace unit and set it back
 		to its boot configuration.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mode
+What:		/sys/bus/coresight/devices/etm<N>/mode
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -91,302 +91,349 @@
 		P0 instruction tracing, branch broadcast, cycle counting and
 		context ID tracing.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/pe
+What:		/sys/bus/coresight/devices/etm<N>/pe
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls which PE to trace.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/event
+What:		/sys/bus/coresight/devices/etm<N>/event
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls the tracing of arbitrary events from bank 0 to 3.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/event_instren
+What:		/sys/bus/coresight/devices/etm<N>/event_instren
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls the behavior of the events in bank 0 to 3.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/event_ts
+What:		/sys/bus/coresight/devices/etm<N>/event_ts
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls the insertion of global timestamps in the trace
 		streams.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/syncfreq
+What:		/sys/bus/coresight/devices/etm<N>/syncfreq
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls how often trace synchronization requests occur.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cyc_threshold
+What:		/sys/bus/coresight/devices/etm<N>/cyc_threshold
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Sets the threshold value for cycle counting.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/bb_ctrl
+What:		/sys/bus/coresight/devices/etm<N>/bb_ctrl
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls which regions in the memory map are enabled to
 		use branch broadcasting.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/event_vinst
+What:		/sys/bus/coresight/devices/etm<N>/event_vinst
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls instruction trace filtering.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/s_exlevel_vinst
+What:		/sys/bus/coresight/devices/etm<N>/s_exlevel_vinst
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) In Secure state, each bit controls whether instruction
 		tracing is enabled for the corresponding exception level.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/ns_exlevel_vinst
+What:		/sys/bus/coresight/devices/etm<N>/ns_exlevel_vinst
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) In non-secure state, each bit controls whether instruction
 		tracing is enabled for the corresponding exception level.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_idx
+What:		/sys/bus/coresight/devices/etm<N>/addr_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Select which address comparator or pair (of comparators) to
 		work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_instdatatype
+What:		/sys/bus/coresight/devices/etm<N>/addr_instdatatype
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls what type of comparison the trace unit performs.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_single
+What:		/sys/bus/coresight/devices/etm<N>/addr_single
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Used to setup single address comparator values.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_range
+What:		/sys/bus/coresight/devices/etm<N>/addr_range
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Used to setup address range comparator values.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_idx
+What:		/sys/bus/coresight/devices/etm<N>/seq_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Select which sequensor.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_state
+What:		/sys/bus/coresight/devices/etm<N>/seq_state
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Use this to set, or read, the sequencer state.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_event
+What:		/sys/bus/coresight/devices/etm<N>/seq_event
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Moves the sequencer state to a specific state.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event
+What:		/sys/bus/coresight/devices/etm<N>/seq_reset_event
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Moves the sequencer to state 0 when a programmed event
 		occurs.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_idx
+What:		/sys/bus/coresight/devices/etm<N>/cntr_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Select which counter unit to work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cntrldvr
+What:		/sys/bus/coresight/devices/etm<N>/cntrldvr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) This sets or returns the reload count value of the
 		specific counter.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_val
+What:		/sys/bus/coresight/devices/etm<N>/cntr_val
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) This sets or returns the current count value of the
                 specific counter.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_ctrl
+What:		/sys/bus/coresight/devices/etm<N>/cntr_ctrl
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls the operation of the selected counter.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/res_idx
+What:		/sys/bus/coresight/devices/etm<N>/res_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Select which resource selection unit to work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/res_ctrl
+What:		/sys/bus/coresight/devices/etm<N>/res_ctrl
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Controls the selection of the resources in the trace unit.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_idx
+What:		/sys/bus/coresight/devices/etm<N>/ctxid_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Select which context ID comparator to work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
+What:		/sys/bus/coresight/devices/etm<N>/ctxid_pid
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Get/Set the context ID comparator value to trigger on.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_masks
+What:		/sys/bus/coresight/devices/etm<N>/ctxid_masks
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Mask for all 8 context ID comparator value
 		registers (if implemented).
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_idx
+What:		/sys/bus/coresight/devices/etm<N>/vmid_idx
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Select which virtual machine ID comparator to work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_val
+What:		/sys/bus/coresight/devices/etm<N>/vmid_val
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Get/Set the virtual machine ID comparator value to
 		trigger on.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_masks
+What:		/sys/bus/coresight/devices/etm<N>/vmid_masks
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Mask for all 8 virtual machine ID comparator value
 		registers (if implemented).
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcoslsr
+What:		/sys/bus/coresight/devices/etm<N>/addr_exlevel_s_ns
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Set the Exception Level matching bits for secure and
+		non-secure exception levels.
+
+What:		/sys/bus/coresight/devices/etm<N>/vinst_pe_cmp_start_stop
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Access the start stop control register for PE input
+		comparators.
+
+What:		/sys/bus/coresight/devices/etm<N>/addr_cmp_view
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the current settings for the selected address
+		comparator.
+
+What:		/sys/bus/coresight/devices/etm<N>/sshot_idx
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Select the single shot control register to access.
+
+What:		/sys/bus/coresight/devices/etm<N>/sshot_ctrl
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Access the selected single shot control register.
+
+What:		/sys/bus/coresight/devices/etm<N>/sshot_status
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the current value of the selected single shot
+		status register.
+
+What:		/sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl
+Date:		December 2019
+KernelVersion:	5.5
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Access the selected single show PE comparator control
+		register.
+
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the OS Lock Status Register (0x304).
 		The value it taken directly  from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdcr
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Power Down Control Register
 		(0x310).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdsr
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Power Down Status Register
 		(0x314).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trclsr
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trclsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the SW Lock Status Register
 		(0xFB4).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcauthstatus
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Authentication Status Register
 		(0xFB8).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevid
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcdevid
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Device ID Register
 		(0xFC8).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevtype
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Device Type Register
 		(0xFCC).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr0
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Peripheral ID0 Register
 		(0xFE0).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr1
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Peripheral ID1 Register
 		(0xFE4).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr2
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Peripheral ID2 Register
 		(0xFE8).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr3
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the Peripheral ID3 Register
 		(0xFEC).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcconfig
 Date:		February 2016
 KernelVersion:	4.07
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the trace configuration register
 		(0x010) as currently set by SW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid
+What:		/sys/bus/coresight/devices/etm<N>/mgmt/trctraceid
 Date:		February 2016
 KernelVersion:	4.07
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Print the content of the trace ID register (0x040).
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr0
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns the tracing capabilities of the trace unit (0x1E0).
 		The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr1
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr1
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns the tracing capabilities of the trace unit (0x1E4).
 		The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr2
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr2
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -394,7 +441,7 @@
 		VMID, context ID and instuction address in the trace unit
 		(0x1E8).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr3
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -403,42 +450,42 @@
 		architecture specification for more details (0x1E8).
 		The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr4
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr4
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns how many resources the trace unit supports (0x1F0).
 		The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr5
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr5
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns how many resources the trace unit supports (0x1F4).
 		The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr8
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr8
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns the maximum speculation depth of the instruction
 		trace stream. (0x180).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr9
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr9
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns the number of P0 right-hand keys that the trace unit
 		can use (0x184).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr10
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr10
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(R) Returns the number of P1 right-hand keys that the trace unit
 		can use (0x188).  The value is taken directly from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr11
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr11
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -446,7 +493,7 @@
 		trace unit can use (0x18C).  The value is taken directly from
 		the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr12
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr12
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -454,7 +501,7 @@
 		the trace unit can use (0x190).  The value is taken directly
 		from the HW.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr13
+What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr13
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/Makefile b/Documentation/Makefile
index e145e4db..30554a2 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -13,7 +13,7 @@
 SPHINXBUILD   = sphinx-build
 SPHINXOPTS    =
 SPHINXDIRS    = .
-_SPHINXDIRS   = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
+_SPHINXDIRS   = $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst))
 SPHINX_CONF   = conf.py
 PAPER         =
 BUILDDIR      = $(obj)/output
@@ -33,8 +33,6 @@
 
 else # HAVE_SPHINX
 
-export SPHINXOPTS = $(shell perl -e 'open IN,"sphinx-build --version 2>&1 |"; while (<IN>) { if (m/([\d\.]+)/) { print "-jauto" if ($$1 >= "1.7") } ;} close IN')
-
 # User-friendly check for pdflatex and latexmk
 HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
 HAVE_LATEXMK := $(shell if which latexmk >/dev/null 2>&1; then echo 1; else echo 0; fi)
@@ -67,6 +65,8 @@
       cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
 	PYTHONDONTWRITEBYTECODE=1 \
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+	$(PYTHON) $(srctree)/scripts/jobserver-exec \
+	$(SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \
 	$(SPHINXBUILD) \
 	-b $2 \
 	-c $(abspath $(srctree)/$(src)) \
diff --git a/Documentation/admin-guide/LSM/SafeSetID.rst b/Documentation/admin-guide/LSM/SafeSetID.rst
index 212434e..7bff07c 100644
--- a/Documentation/admin-guide/LSM/SafeSetID.rst
+++ b/Documentation/admin-guide/LSM/SafeSetID.rst
@@ -56,7 +56,7 @@
 spawning semantics in the application (e.g. by using a privileged helper program
 to do process spawning and UID/GID transitions). Unfortunately, there are a
 number of semantics around process spawning that would be affected by this, such
-as fork() calls where the program doesn???t immediately call exec() after the
+as fork() calls where the program doesn't immediately call exec() after the
 fork(), parent processes specifying custom environment variables or command line
 args for spawned child processes, or inheritance of file handles across a
 fork()/exec(). Because of this, as solution that uses a privileged helper in
@@ -72,7 +72,7 @@
 initial system user namespace, affectively preventing privilege escalation.
 Unfortunately, it is not generally feasible to use user namespaces in isolation,
 without pairing them with other namespace types, which is not always an option.
-Linux checks for capabilities based off of the user namespace that ???owns??? some
+Linux checks for capabilities based off of the user namespace that "owns" some
 entity. For example, Linux has the notion that network namespaces are owned by
 the user namespace in which they were created. A consequence of this is that
 capability checks for access to a given network namespace are done by checking
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 6d13f2d..0636bcb 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -1120,8 +1120,9 @@
 
 	Best-effort memory protection.  If the memory usage of a
 	cgroup is within its effective low boundary, the cgroup's
-	memory won't be reclaimed unless memory can be reclaimed
-	from unprotected cgroups.  Above the effective low boundary (or
+	memory won't be reclaimed unless there is no reclaimable
+	memory available in unprotected cgroups.
+	Above the effective low	boundary (or 
 	effective min boundary if it is higher), pages are reclaimed
 	proportionally to the overage, reducing reclaim pressure for
 	smaller overages.
@@ -1925,7 +1926,7 @@
 
         It accepts only the following input values when written to.
 
-        "root"   - a paritition root
+        "root"   - a partition root
         "member" - a non-root member of a partition
 
 	When set to be a partition root, the current cgroup is the
diff --git a/Documentation/driver-api/dell_rbu.rst b/Documentation/admin-guide/dell_rbu.rst
similarity index 94%
rename from Documentation/driver-api/dell_rbu.rst
rename to Documentation/admin-guide/dell_rbu.rst
index 5d1ce7b..8d70e1f 100644
--- a/Documentation/driver-api/dell_rbu.rst
+++ b/Documentation/admin-guide/dell_rbu.rst
@@ -1,11 +1,11 @@
-=============================================================
-Usage of the new open sourced rbu (Remote BIOS Update) driver
-=============================================================
+=========================================
+Dell Remote BIOS Update driver (dell_rbu)
+=========================================
 
 Purpose
 =======
 
-Document demonstrating the use of the Dell Remote BIOS Update driver.
+Document demonstrating the use of the Dell Remote BIOS Update driver
 for updating BIOS images on Dell servers and desktops.
 
 Scope
@@ -37,7 +37,7 @@
 
 If the dell_rbu driver is unloaded all the allocated memory is freed.
 
-The rbu driver needs to have an application (as mentioned above)which will
+The rbu driver needs to have an application (as mentioned above) which will
 inform the BIOS to enable the update in the next system reboot.
 
 The user should not unload the rbu driver after downloading the BIOS image
@@ -71,7 +71,7 @@
 	echo XXXX > /sys/devices/platform/dell_rbu/packet_size
 
 In the packet update mechanism, the user needs to create a new file having
-packets of data arranged back to back. It can be done as follows
+packets of data arranged back to back. It can be done as follows:
 The user creates packets header, gets the chunk of the BIOS image and
 places it next to the packetheader; now, the packetheader + BIOS image chunk
 added together should match the specified packet_size. This makes one
@@ -114,7 +114,7 @@
 
 	echo init > /sys/devices/platform/dell_rbu/image_type
 
-.. note:: echoing init in image_type does not change it original value.
+.. note:: echoing init in image_type does not change its original value.
 
 Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
 read back the image downloaded.
diff --git a/Documentation/admin-guide/device-mapper/dm-dust.rst b/Documentation/admin-guide/device-mapper/dm-dust.rst
new file mode 100644
index 0000000..b6e7e7e
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-dust.rst
@@ -0,0 +1,287 @@
+dm-dust
+=======
+
+This target emulates the behavior of bad sectors at arbitrary
+locations, and the ability to enable the emulation of the failures
+at an arbitrary time.
+
+This target behaves similarly to a linear target.  At a given time,
+the user can send a message to the target to start failing read
+requests on specific blocks (to emulate the behavior of a hard disk
+drive with bad sectors).
+
+When the failure behavior is enabled (i.e.: when the output of
+"dmsetup status" displays "fail_read_on_bad_block"), reads of blocks
+in the "bad block list" will fail with EIO ("Input/output error").
+
+Writes of blocks in the "bad block list will result in the following:
+
+1. Remove the block from the "bad block list".
+2. Successfully complete the write.
+
+This emulates the "remapped sector" behavior of a drive with bad
+sectors.
+
+Normally, a drive that is encountering bad sectors will most likely
+encounter more bad sectors, at an unknown time or location.
+With dm-dust, the user can use the "addbadblock" and "removebadblock"
+messages to add arbitrary bad blocks at new locations, and the
+"enable" and "disable" messages to modulate the state of whether the
+configured "bad blocks" will be treated as bad, or bypassed.
+This allows the pre-writing of test data and metadata prior to
+simulating a "failure" event where bad sectors start to appear.
+
+Table parameters
+----------------
+<device_path> <offset> <blksz>
+
+Mandatory parameters:
+    <device_path>:
+        Path to the block device.
+
+    <offset>:
+        Offset to data area from start of device_path
+
+    <blksz>:
+        Block size in bytes
+
+	     (minimum 512, maximum 1073741824, must be a power of 2)
+
+Usage instructions
+------------------
+
+First, find the size (in 512-byte sectors) of the device to be used::
+
+        $ sudo blockdev --getsz /dev/vdb1
+        33552384
+
+Create the dm-dust device:
+(For a device with a block size of 512 bytes)
+
+::
+
+        $ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 512'
+
+(For a device with a block size of 4096 bytes)
+
+::
+
+        $ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 4096'
+
+Check the status of the read behavior ("bypass" indicates that all I/O
+will be passed through to the underlying device)::
+
+        $ sudo dmsetup status dust1
+        0 33552384 dust 252:17 bypass
+
+        $ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=128 iflag=direct
+        128+0 records in
+        128+0 records out
+
+        $ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+        128+0 records in
+        128+0 records out
+
+Adding and removing bad blocks
+------------------------------
+
+At any time (i.e.: whether the device has the "bad block" emulation
+enabled or disabled), bad blocks may be added or removed from the
+device via the "addbadblock" and "removebadblock" messages::
+
+        $ sudo dmsetup message dust1 0 addbadblock 60
+        kernel: device-mapper: dust: badblock added at block 60
+
+        $ sudo dmsetup message dust1 0 addbadblock 67
+        kernel: device-mapper: dust: badblock added at block 67
+
+        $ sudo dmsetup message dust1 0 addbadblock 72
+        kernel: device-mapper: dust: badblock added at block 72
+
+These bad blocks will be stored in the "bad block list".
+While the device is in "bypass" mode, reads and writes will succeed::
+
+        $ sudo dmsetup status dust1
+        0 33552384 dust 252:17 bypass
+
+Enabling block read failures
+----------------------------
+
+To enable the "fail read on bad block" behavior, send the "enable" message::
+
+        $ sudo dmsetup message dust1 0 enable
+        kernel: device-mapper: dust: enabling read failures on bad sectors
+
+        $ sudo dmsetup status dust1
+        0 33552384 dust 252:17 fail_read_on_bad_block
+
+With the device in "fail read on bad block" mode, attempting to read a
+block will encounter an "Input/output error"::
+
+        $ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=1 skip=67 iflag=direct
+        dd: error reading '/dev/mapper/dust1': Input/output error
+        0+0 records in
+        0+0 records out
+        0 bytes copied, 0.00040651 s, 0.0 kB/s
+
+...and writing to the bad blocks will remove the blocks from the list,
+therefore emulating the "remap" behavior of hard disk drives::
+
+        $ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+        128+0 records in
+        128+0 records out
+
+        kernel: device-mapper: dust: block 60 removed from badblocklist by write
+        kernel: device-mapper: dust: block 67 removed from badblocklist by write
+        kernel: device-mapper: dust: block 72 removed from badblocklist by write
+        kernel: device-mapper: dust: block 87 removed from badblocklist by write
+
+Bad block add/remove error handling
+-----------------------------------
+
+Attempting to add a bad block that already exists in the list will
+result in an "Invalid argument" error, as well as a helpful message::
+
+        $ sudo dmsetup message dust1 0 addbadblock 88
+        device-mapper: message ioctl on dust1  failed: Invalid argument
+        kernel: device-mapper: dust: block 88 already in badblocklist
+
+Attempting to remove a bad block that doesn't exist in the list will
+result in an "Invalid argument" error, as well as a helpful message::
+
+        $ sudo dmsetup message dust1 0 removebadblock 87
+        device-mapper: message ioctl on dust1  failed: Invalid argument
+        kernel: device-mapper: dust: block 87 not found in badblocklist
+
+Counting the number of bad blocks in the bad block list
+-------------------------------------------------------
+
+To count the number of bad blocks configured in the device, run the
+following message command::
+
+        $ sudo dmsetup message dust1 0 countbadblocks
+
+A message will print with the number of bad blocks currently
+configured on the device::
+
+        kernel: device-mapper: dust: countbadblocks: 895 badblock(s) found
+
+Querying for specific bad blocks
+--------------------------------
+
+To find out if a specific block is in the bad block list, run the
+following message command::
+
+        $ sudo dmsetup message dust1 0 queryblock 72
+
+The following message will print if the block is in the list::
+
+        device-mapper: dust: queryblock: block 72 found in badblocklist
+
+The following message will print if the block is not in the list::
+
+        device-mapper: dust: queryblock: block 72 not found in badblocklist
+
+The "queryblock" message command will work in both the "enabled"
+and "disabled" modes, allowing the verification of whether a block
+will be treated as "bad" without having to issue I/O to the device,
+or having to "enable" the bad block emulation.
+
+Clearing the bad block list
+---------------------------
+
+To clear the bad block list (without needing to individually run
+a "removebadblock" message command for every block), run the
+following message command::
+
+        $ sudo dmsetup message dust1 0 clearbadblocks
+
+After clearing the bad block list, the following message will appear::
+
+        kernel: device-mapper: dust: clearbadblocks: badblocks cleared
+
+If there were no bad blocks to clear, the following message will
+appear::
+
+        kernel: device-mapper: dust: clearbadblocks: no badblocks found
+
+Message commands list
+---------------------
+
+Below is a list of the messages that can be sent to a dust device:
+
+Operations on blocks (requires a <blknum> argument)::
+
+        addbadblock <blknum>
+        queryblock <blknum>
+        removebadblock <blknum>
+
+...where <blknum> is a block number within range of the device
+(corresponding to the block size of the device.)
+
+Single argument message commands::
+
+        countbadblocks
+        clearbadblocks
+        disable
+        enable
+        quiet
+
+Device removal
+--------------
+
+When finished, remove the device via the "dmsetup remove" command::
+
+        $ sudo dmsetup remove dust1
+
+Quiet mode
+----------
+
+On test runs with many bad blocks, it may be desirable to avoid
+excessive logging (from bad blocks added, removed, or "remapped").
+This can be done by enabling "quiet mode" via the following message::
+
+        $ sudo dmsetup message dust1 0 quiet
+
+This will suppress log messages from add / remove / removed by write
+operations.  Log messages from "countbadblocks" or "queryblock"
+message commands will still print in quiet mode.
+
+The status of quiet mode can be seen by running "dmsetup status"::
+
+        $ sudo dmsetup status dust1
+        0 33552384 dust 252:17 fail_read_on_bad_block quiet
+
+To disable quiet mode, send the "quiet" message again::
+
+        $ sudo dmsetup message dust1 0 quiet
+
+        $ sudo dmsetup status dust1
+        0 33552384 dust 252:17 fail_read_on_bad_block verbose
+
+(The presence of "verbose" indicates normal logging.)
+
+"Why not...?"
+-------------
+
+scsi_debug has a "medium error" mode that can fail reads on one
+specified sector (sector 0x1234, hardcoded in the source code), but
+it uses RAM for the persistent storage, which drastically decreases
+the potential device size.
+
+dm-flakey fails all I/O from all block locations at a specified time
+frequency, and not a given point in time.
+
+When a bad sector occurs on a hard disk drive, reads to that sector
+are failed by the device, usually resulting in an error code of EIO
+("I/O error") or ENODATA ("No data available").  However, a write to
+the sector may succeed, and result in the sector becoming readable
+after the device controller no longer experiences errors reading the
+sector (or after a reallocation of the sector).  However, there may
+be bad sectors that occur on the device in the future, in a different,
+unpredictable location.
+
+This target seeks to provide a device that can exhibit the behavior
+of a bad sector at a known sector location, at a known time, based
+on a large storage device (at least tens of gigabytes, not occupying
+system memory).
diff --git a/Documentation/admin-guide/device-mapper/dm-dust.txt b/Documentation/admin-guide/device-mapper/dm-dust.txt
deleted file mode 100644
index 954d402..0000000
--- a/Documentation/admin-guide/device-mapper/dm-dust.txt
+++ /dev/null
@@ -1,272 +0,0 @@
-dm-dust
-=======
-
-This target emulates the behavior of bad sectors at arbitrary
-locations, and the ability to enable the emulation of the failures
-at an arbitrary time.
-
-This target behaves similarly to a linear target.  At a given time,
-the user can send a message to the target to start failing read
-requests on specific blocks (to emulate the behavior of a hard disk
-drive with bad sectors).
-
-When the failure behavior is enabled (i.e.: when the output of
-"dmsetup status" displays "fail_read_on_bad_block"), reads of blocks
-in the "bad block list" will fail with EIO ("Input/output error").
-
-Writes of blocks in the "bad block list will result in the following:
-
-1. Remove the block from the "bad block list".
-2. Successfully complete the write.
-
-This emulates the "remapped sector" behavior of a drive with bad
-sectors.
-
-Normally, a drive that is encountering bad sectors will most likely
-encounter more bad sectors, at an unknown time or location.
-With dm-dust, the user can use the "addbadblock" and "removebadblock"
-messages to add arbitrary bad blocks at new locations, and the
-"enable" and "disable" messages to modulate the state of whether the
-configured "bad blocks" will be treated as bad, or bypassed.
-This allows the pre-writing of test data and metadata prior to
-simulating a "failure" event where bad sectors start to appear.
-
-Table parameters:
------------------
-<device_path> <offset> <blksz>
-
-Mandatory parameters:
-    <device_path>: path to the block device.
-    <offset>: offset to data area from start of device_path
-    <blksz>: block size in bytes
-	     (minimum 512, maximum 1073741824, must be a power of 2)
-
-Usage instructions:
--------------------
-
-First, find the size (in 512-byte sectors) of the device to be used:
-
-$ sudo blockdev --getsz /dev/vdb1
-33552384
-
-Create the dm-dust device:
-(For a device with a block size of 512 bytes)
-$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 512'
-
-(For a device with a block size of 4096 bytes)
-$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 4096'
-
-Check the status of the read behavior ("bypass" indicates that all I/O
-will be passed through to the underlying device):
-$ sudo dmsetup status dust1
-0 33552384 dust 252:17 bypass
-
-$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=128 iflag=direct
-128+0 records in
-128+0 records out
-
-$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
-128+0 records in
-128+0 records out
-
-Adding and removing bad blocks:
--------------------------------
-
-At any time (i.e.: whether the device has the "bad block" emulation
-enabled or disabled), bad blocks may be added or removed from the
-device via the "addbadblock" and "removebadblock" messages:
-
-$ sudo dmsetup message dust1 0 addbadblock 60
-kernel: device-mapper: dust: badblock added at block 60
-
-$ sudo dmsetup message dust1 0 addbadblock 67
-kernel: device-mapper: dust: badblock added at block 67
-
-$ sudo dmsetup message dust1 0 addbadblock 72
-kernel: device-mapper: dust: badblock added at block 72
-
-These bad blocks will be stored in the "bad block list".
-While the device is in "bypass" mode, reads and writes will succeed:
-
-$ sudo dmsetup status dust1
-0 33552384 dust 252:17 bypass
-
-Enabling block read failures:
------------------------------
-
-To enable the "fail read on bad block" behavior, send the "enable" message:
-
-$ sudo dmsetup message dust1 0 enable
-kernel: device-mapper: dust: enabling read failures on bad sectors
-
-$ sudo dmsetup status dust1
-0 33552384 dust 252:17 fail_read_on_bad_block
-
-With the device in "fail read on bad block" mode, attempting to read a
-block will encounter an "Input/output error":
-
-$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=1 skip=67 iflag=direct
-dd: error reading '/dev/mapper/dust1': Input/output error
-0+0 records in
-0+0 records out
-0 bytes copied, 0.00040651 s, 0.0 kB/s
-
-...and writing to the bad blocks will remove the blocks from the list,
-therefore emulating the "remap" behavior of hard disk drives:
-
-$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
-128+0 records in
-128+0 records out
-
-kernel: device-mapper: dust: block 60 removed from badblocklist by write
-kernel: device-mapper: dust: block 67 removed from badblocklist by write
-kernel: device-mapper: dust: block 72 removed from badblocklist by write
-kernel: device-mapper: dust: block 87 removed from badblocklist by write
-
-Bad block add/remove error handling:
-------------------------------------
-
-Attempting to add a bad block that already exists in the list will
-result in an "Invalid argument" error, as well as a helpful message:
-
-$ sudo dmsetup message dust1 0 addbadblock 88
-device-mapper: message ioctl on dust1  failed: Invalid argument
-kernel: device-mapper: dust: block 88 already in badblocklist
-
-Attempting to remove a bad block that doesn't exist in the list will
-result in an "Invalid argument" error, as well as a helpful message:
-
-$ sudo dmsetup message dust1 0 removebadblock 87
-device-mapper: message ioctl on dust1  failed: Invalid argument
-kernel: device-mapper: dust: block 87 not found in badblocklist
-
-Counting the number of bad blocks in the bad block list:
---------------------------------------------------------
-
-To count the number of bad blocks configured in the device, run the
-following message command:
-
-$ sudo dmsetup message dust1 0 countbadblocks
-
-A message will print with the number of bad blocks currently
-configured on the device:
-
-kernel: device-mapper: dust: countbadblocks: 895 badblock(s) found
-
-Querying for specific bad blocks:
----------------------------------
-
-To find out if a specific block is in the bad block list, run the
-following message command:
-
-$ sudo dmsetup message dust1 0 queryblock 72
-
-The following message will print if the block is in the list:
-device-mapper: dust: queryblock: block 72 found in badblocklist
-
-The following message will print if the block is in the list:
-device-mapper: dust: queryblock: block 72 not found in badblocklist
-
-The "queryblock" message command will work in both the "enabled"
-and "disabled" modes, allowing the verification of whether a block
-will be treated as "bad" without having to issue I/O to the device,
-or having to "enable" the bad block emulation.
-
-Clearing the bad block list:
-----------------------------
-
-To clear the bad block list (without needing to individually run
-a "removebadblock" message command for every block), run the
-following message command:
-
-$ sudo dmsetup message dust1 0 clearbadblocks
-
-After clearing the bad block list, the following message will appear:
-
-kernel: device-mapper: dust: clearbadblocks: badblocks cleared
-
-If there were no bad blocks to clear, the following message will
-appear:
-
-kernel: device-mapper: dust: clearbadblocks: no badblocks found
-
-Message commands list:
-----------------------
-
-Below is a list of the messages that can be sent to a dust device:
-
-Operations on blocks (requires a <blknum> argument):
-
-addbadblock <blknum>
-queryblock <blknum>
-removebadblock <blknum>
-
-...where <blknum> is a block number within range of the device
-  (corresponding to the block size of the device.)
-
-Single argument message commands:
-
-countbadblocks
-clearbadblocks
-disable
-enable
-quiet
-
-Device removal:
----------------
-
-When finished, remove the device via the "dmsetup remove" command:
-
-$ sudo dmsetup remove dust1
-
-Quiet mode:
------------
-
-On test runs with many bad blocks, it may be desirable to avoid
-excessive logging (from bad blocks added, removed, or "remapped").
-This can be done by enabling "quiet mode" via the following message:
-
-$ sudo dmsetup message dust1 0 quiet
-
-This will suppress log messages from add / remove / removed by write
-operations.  Log messages from "countbadblocks" or "queryblock"
-message commands will still print in quiet mode.
-
-The status of quiet mode can be seen by running "dmsetup status":
-
-$ sudo dmsetup status dust1
-0 33552384 dust 252:17 fail_read_on_bad_block quiet
-
-To disable quiet mode, send the "quiet" message again:
-
-$ sudo dmsetup message dust1 0 quiet
-
-$ sudo dmsetup status dust1
-0 33552384 dust 252:17 fail_read_on_bad_block verbose
-
-(The presence of "verbose" indicates normal logging.)
-
-"Why not...?"
--------------
-
-scsi_debug has a "medium error" mode that can fail reads on one
-specified sector (sector 0x1234, hardcoded in the source code), but
-it uses RAM for the persistent storage, which drastically decreases
-the potential device size.
-
-dm-flakey fails all I/O from all block locations at a specified time
-frequency, and not a given point in time.
-
-When a bad sector occurs on a hard disk drive, reads to that sector
-are failed by the device, usually resulting in an error code of EIO
-("I/O error") or ENODATA ("No data available").  However, a write to
-the sector may succeed, and result in the sector becoming readable
-after the device controller no longer experiences errors reading the
-sector (or after a reallocation of the sector).  However, there may
-be bad sectors that occur on the device in the future, in a different,
-unpredictable location.
-
-This target seeks to provide a device that can exhibit the behavior
-of a bad sector at a known sector location, at a known time, based
-on a large storage device (at least tens of gigabytes, not occupying
-system memory).
diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
index c77c58b..4872fb6 100644
--- a/Documentation/admin-guide/device-mapper/index.rst
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -9,6 +9,7 @@
     cache
     delay
     dm-crypt
+    dm-dust
     dm-flakey
     dm-init
     dm-integrity
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 34cc20e..4405b74 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -57,60 +57,61 @@
 .. toctree::
    :maxdepth: 1
 
-   initrd
-   cgroup-v2
-   cgroup-v1/index
-   serial-console
-   braille-console
-   parport
-   md
-   module-signing
-   rapidio
-   sysrq
-   unicode
-   vga-softcursor
-   binfmt-misc
-   mono
-   java
-   ras
-   bcache
-   blockdev/index
-   ext4
-   binderfs
-   cifs/index
-   xfs
-   jfs
-   ufs
-   pm/index
-   thunderbolt
-   LSM/index
-   mm/index
-   namespaces/index
-   perf-security
    acpi/index
    aoe/index
+   auxdisplay/index
+   bcache
+   binderfs
+   binfmt-misc
+   blockdev/index
+   braille-console
    btmrvl
+   cgroup-v1/index
+   cgroup-v2
+   cifs/index
    clearing-warn-once
    cpu-load
    cputopology
+   dell_rbu
    device-mapper/index
    efi-stub
+   ext4
    gpio/index
    highuid
    hw_random
+   initrd
    iostats
+   java
+   jfs
    kernel-per-CPU-kthreads
    laptops/index
-   auxdisplay/index
    lcd-panel-cgram
    ldm
    lockup-watchdogs
+   LSM/index
+   md
+   mm/index
+   module-signing
+   mono
+   namespaces/index
    numastat
+   parport
+   perf-security
+   pm/index
    pnp
+   rapidio
+   ras
    rtc
+   serial-console
    svga
-   wimax/index
+   sysrq
+   thunderbolt
+   ufs
+   unicode
+   vga-softcursor
    video-output
+   wimax/index
+   xfs
 
 .. only::  subproject and html
 
diff --git a/Documentation/admin-guide/iostats.rst b/Documentation/admin-guide/iostats.rst
index 4f0462a..df5b834 100644
--- a/Documentation/admin-guide/iostats.rst
+++ b/Documentation/admin-guide/iostats.rst
@@ -46,78 +46,79 @@
 In 2.4, the statistics fields are those after the device name. In
 the above example, the first field of statistics would be 446216.
 By contrast, in 2.6+ if you look at ``/sys/block/hda/stat``, you'll
-find just the eleven fields, beginning with 446216.  If you look at
-``/proc/diskstats``, the eleven fields will be preceded by the major and
+find just the 15 fields, beginning with 446216.  If you look at
+``/proc/diskstats``, the 15 fields will be preceded by the major and
 minor device numbers, and device name.  Each of these formats provides
-eleven fields of statistics, each meaning exactly the same things.
+15 fields of statistics, each meaning exactly the same things.
 All fields except field 9 are cumulative since boot.  Field 9 should
 go to zero as I/Os complete; all others only increase (unless they
-overflow and wrap).  Yes, these are (32-bit or 64-bit) unsigned long
-(native word size) numbers, and on a very busy or long-lived system they
-may wrap. Applications should be prepared to deal with that; unless
-your observations are measured in large numbers of minutes or hours,
-they should not wrap twice before you notice them.
+overflow and wrap). Wrapping might eventually occur on a very busy
+or long-lived system; so applications should be prepared to deal with
+it. Regarding wrapping, the types of the fields are either unsigned
+int (32 bit) or unsigned long (32-bit or 64-bit, depending on your
+machine) as noted per-field below. Unless your observations are very
+spread in time, these fields should not wrap twice before you notice it.
 
 Each set of stats only applies to the indicated device; if you want
 system-wide stats you'll have to find all the devices and sum them all up.
 
-Field  1 -- # of reads completed
+Field  1 -- # of reads completed (unsigned long)
     This is the total number of reads completed successfully.
 
-Field  2 -- # of reads merged, field 6 -- # of writes merged
+Field  2 -- # of reads merged, field 6 -- # of writes merged (unsigned long)
     Reads and writes which are adjacent to each other may be merged for
     efficiency.  Thus two 4K reads may become one 8K read before it is
     ultimately handed to the disk, and so it will be counted (and queued)
     as only one I/O.  This field lets you know how often this was done.
 
-Field  3 -- # of sectors read
+Field  3 -- # of sectors read (unsigned long)
     This is the total number of sectors read successfully.
 
-Field  4 -- # of milliseconds spent reading
+Field  4 -- # of milliseconds spent reading (unsigned int)
     This is the total number of milliseconds spent by all reads (as
     measured from __make_request() to end_that_request_last()).
 
-Field  5 -- # of writes completed
+Field  5 -- # of writes completed (unsigned long)
     This is the total number of writes completed successfully.
 
-Field  6 -- # of writes merged
+Field  6 -- # of writes merged  (unsigned long)
     See the description of field 2.
 
-Field  7 -- # of sectors written
+Field  7 -- # of sectors written (unsigned long)
     This is the total number of sectors written successfully.
 
-Field  8 -- # of milliseconds spent writing
+Field  8 -- # of milliseconds spent writing (unsigned int)
     This is the total number of milliseconds spent by all writes (as
     measured from __make_request() to end_that_request_last()).
 
-Field  9 -- # of I/Os currently in progress
+Field  9 -- # of I/Os currently in progress (unsigned int)
     The only field that should go to zero. Incremented as requests are
     given to appropriate struct request_queue and decremented as they finish.
 
-Field 10 -- # of milliseconds spent doing I/Os
+Field 10 -- # of milliseconds spent doing I/Os (unsigned int)
     This field increases so long as field 9 is nonzero.
 
     Since 5.0 this field counts jiffies when at least one request was
     started or completed. If request runs more than 2 jiffies then some
     I/O time will not be accounted unless there are other requests.
 
-Field 11 -- weighted # of milliseconds spent doing I/Os
+Field 11 -- weighted # of milliseconds spent doing I/Os (unsigned int)
     This field is incremented at each I/O start, I/O completion, I/O
     merge, or read of these stats by the number of I/Os in progress
     (field 9) times the number of milliseconds spent doing I/O since the
     last update of this field.  This can provide an easy measure of both
     I/O completion time and the backlog that may be accumulating.
 
-Field 12 -- # of discards completed
+Field 12 -- # of discards completed (unsigned long)
     This is the total number of discards completed successfully.
 
-Field 13 -- # of discards merged
+Field 13 -- # of discards merged (unsigned long)
     See the description of field 2
 
-Field 14 -- # of sectors discarded
+Field 14 -- # of sectors discarded (unsigned long)
     This is the total number of sectors discarded successfully.
 
-Field 15 -- # of milliseconds spent discarding
+Field 15 -- # of milliseconds spent discarding (unsigned int)
     This is the total number of milliseconds spent by all discards (as
     measured from __make_request() to end_that_request_last()).
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b25b47a..068ccc2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -437,8 +437,6 @@
 			no delay (0).
 			Format: integer
 
-	bootmem_debug	[KNL] Enable bootmem allocator debug messages.
-
 	bert_disable	[ACPI]
 			Disable BERT OS support on buggy BIOSes.
 
@@ -983,12 +981,10 @@
 
 	earlycon=	[KNL] Output early console device and options.
 
-			[ARM64] The early console is determined by the
-			stdout-path property in device tree's chosen node,
-			or determined by the ACPI SPCR table.
-
-			[X86] When used with no options the early console is
-			determined by the ACPI SPCR table.
+			When used with no options, the early console is
+			determined by stdout-path property in device tree's
+			chosen node or the ACPI SPCR table if supported by
+			the platform.
 
 		cdns,<addr>[,options]
 			Start an early, polled-mode console on a Cadence
diff --git a/Documentation/admin-guide/perf/imx-ddr.rst b/Documentation/admin-guide/perf/imx-ddr.rst
index 90056e4..3726a10 100644
--- a/Documentation/admin-guide/perf/imx-ddr.rst
+++ b/Documentation/admin-guide/perf/imx-ddr.rst
@@ -19,7 +19,9 @@
 hardware supported that can be used with perf tool, see /sys/bus/event_source/
 devices/imx8_ddr0/events/. The "caps" directory describes filter features implemented
 in DDR PMU, see /sys/bus/events_source/devices/imx8_ddr0/caps/.
-  e.g.::
+
+    .. code-block:: bash
+
         perf stat -a -e imx8_ddr0/cycles/ cmd
         perf stat -a -e imx8_ddr0/read/,imx8_ddr0/write/ cmd
 
@@ -35,24 +37,31 @@
   Filter is defined with two configuration parts:
   --AXI_ID defines AxID matching value.
   --AXI_MASKING defines which bits of AxID are meaningful for the matching.
-        0：corresponding bit is masked.
-        1: corresponding bit is not masked, i.e. used to do the matching.
+
+      - 0: corresponding bit is masked.
+      - 1: corresponding bit is not masked, i.e. used to do the matching.
 
   AXI_ID and AXI_MASKING are mapped on DPCR1 register in performance counter.
   When non-masked bits are matching corresponding AXI_ID bits then counter is
   incremented. Perf counter is incremented if
-          AxID && AXI_MASKING == AXI_ID && AXI_MASKING
+        AxID && AXI_MASKING == AXI_ID && AXI_MASKING
 
   This filter doesn't support filter different AXI ID for axid-read and axid-write
   event at the same time as this filter is shared between counters.
-  e.g.::
-        perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
-        perf stat -a -e imx8_ddr0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
 
-  NOTE: axi_mask is inverted in userspace(i.e. set bits are bits to mask), and
-  it will be reverted in driver automatically. so that the user can just specify
-  axi_id to monitor a specific id, rather than having to specify axi_mask.
-  e.g.::
+  .. code-block:: bash
+
+      perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
+      perf stat -a -e imx8_ddr0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
+
+  .. note::
+
+      axi_mask is inverted in userspace(i.e. set bits are bits to mask), and
+      it will be reverted in driver automatically. so that the user can just specify
+      axi_id to monitor a specific id, rather than having to specify axi_mask.
+
+  .. code-block:: bash
+
         perf stat -a -e imx8_ddr0/axid-read,axi_id=0x12/ cmd, which will monitor ARID=0x12
 
 * With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1).
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index ee4bfd2..47c99f4 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -8,6 +8,7 @@
    :maxdepth: 1
 
    hisi-pmu
+   imx-ddr
    qcom_l2_pmu
    qcom_l3_pmu
    arm-ccn
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 032c7cd..def0748 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -831,8 +831,8 @@
 =================
 
 Some warning messages are rate limited. printk_ratelimit specifies
-the minimum length of time between these messages (in jiffies), by
-default we allow one every 5 seconds.
+the minimum length of time between these messages (in seconds).
+The default value is 5 seconds.
 
 A value of 0 will disable rate limiting.
 
@@ -845,6 +845,8 @@
 printk_ratelimit_burst specifies the number of messages we can
 send before ratelimiting kicks in.
 
+The default value is 10 messages.
+
 
 printk_devkmsg:
 ===============
@@ -1101,7 +1103,7 @@
 maximum number of threads is created, the thread structures occupy only
 a part (1/8th) of the available RAM pages.
 
-The minimum value that can be written to threads-max is 20.
+The minimum value that can be written to threads-max is 1.
 
 The maximum value that can be written to threads-max is given by the
 constant FUTEX_TID_MASK (0x3fffffff).
@@ -1109,10 +1111,6 @@
 If a value outside of this range is written to threads-max an error
 EINVAL occurs.
 
-The value written is checked against the available RAM pages. If the
-thread structures would occupy too much (more than 1/8th) of the
-available RAM pages threads-max is reduced accordingly.
-
 
 unknown_nmi_panic:
 ==================
diff --git a/Documentation/conf.py b/Documentation/conf.py
index a8fe845..3c7bdf4 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -37,7 +37,8 @@
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain',
-              'kfigure', 'sphinx.ext.ifconfig', 'automarkup']
+              'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
+              'maintainers_include']
 
 # The name of the math extension changed on Sphinx 1.4
 if (major == 1 and minor > 3) or (major > 1):
diff --git a/Documentation/core-api/genalloc.rst b/Documentation/core-api/genalloc.rst
index 6b38a39..098a46f 100644
--- a/Documentation/core-api/genalloc.rst
+++ b/Documentation/core-api/genalloc.rst
@@ -23,7 +23,7 @@
 .. kernel-doc:: lib/genalloc.c
    :functions: devm_gen_pool_create
 
-A call to :c:func:`gen_pool_create` will create a pool.  The granularity of
+A call to gen_pool_create() will create a pool.  The granularity of
 allocations is set with min_alloc_order; it is a log-base-2 number like
 those used by the page allocator, but it refers to bytes rather than pages.
 So, if min_alloc_order is passed as 3, then all allocations will be a
@@ -32,7 +32,7 @@
 which NUMA node should be used for the allocation of the housekeeping
 structures; it can be -1 if the caller doesn't care.
 
-The "managed" interface :c:func:`devm_gen_pool_create` ties the pool to a
+The "managed" interface devm_gen_pool_create() ties the pool to a
 specific device.  Among other things, it will automatically clean up the
 pool when the given device is destroyed.
 
@@ -53,32 +53,32 @@
    :functions: gen_pool_add
 
 .. kernel-doc:: lib/genalloc.c
-   :functions: gen_pool_add_virt
+   :functions: gen_pool_add_owner
 
-A call to :c:func:`gen_pool_add` will place the size bytes of memory
+A call to gen_pool_add() will place the size bytes of memory
 starting at addr (in the kernel's virtual address space) into the given
 pool, once again using nid as the node ID for ancillary memory allocations.
-The :c:func:`gen_pool_add_virt` variant associates an explicit physical
+The gen_pool_add_virt() variant associates an explicit physical
 address with the memory; this is only necessary if the pool will be used
 for DMA allocations.
 
 The functions for allocating memory from the pool (and putting it back)
 are:
 
-.. kernel-doc:: lib/genalloc.c
+.. kernel-doc:: include/linux/genalloc.h
    :functions: gen_pool_alloc
 
 .. kernel-doc:: lib/genalloc.c
    :functions: gen_pool_dma_alloc
 
 .. kernel-doc:: lib/genalloc.c
-   :functions: gen_pool_free
+   :functions: gen_pool_free_owner
 
-As one would expect, :c:func:`gen_pool_alloc` will allocate size< bytes
-from the given pool.  The :c:func:`gen_pool_dma_alloc` variant allocates
+As one would expect, gen_pool_alloc() will allocate size< bytes
+from the given pool.  The gen_pool_dma_alloc() variant allocates
 memory for use with DMA operations, returning the associated physical
 address in the space pointed to by dma.  This will only work if the memory
-was added with :c:func:`gen_pool_add_virt`.  Note that this function
+was added with gen_pool_add_virt().  Note that this function
 departs from the usual genpool pattern of using unsigned long values to
 represent kernel addresses; it returns a void * instead.
 
@@ -89,14 +89,14 @@
 of interest:
 
 .. kernel-doc:: lib/genalloc.c
-   :functions: gen_pool_alloc_algo
+   :functions: gen_pool_alloc_algo_owner
 
 .. kernel-doc:: lib/genalloc.c
    :functions: gen_pool_set_algo
 
-Allocations with :c:func:`gen_pool_alloc_algo` specify an algorithm to be
+Allocations with gen_pool_alloc_algo() specify an algorithm to be
 used to choose the memory to be allocated; the default algorithm can be set
-with :c:func:`gen_pool_set_algo`.  The data value is passed to the
+with gen_pool_set_algo().  The data value is passed to the
 algorithm; most ignore it, but it is occasionally needed.  One can,
 naturally, write a special-purpose algorithm, but there is a fair set
 already available:
diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst
index 4da67b6..8f06d88 100644
--- a/Documentation/core-api/genericirq.rst
+++ b/Documentation/core-api/genericirq.rst
@@ -26,7 +26,7 @@
 =========
 
 The original implementation of interrupt handling in Linux uses the
-:c:func:`__do_IRQ` super-handler, which is able to deal with every type of
+__do_IRQ() super-handler, which is able to deal with every type of
 interrupt logic.
 
 Originally, Russell King identified different types of handlers to build
@@ -43,7 +43,7 @@
 
 -  Fast EOI type
 
-In the SMP world of the :c:func:`__do_IRQ` super-handler another type was
+In the SMP world of the __do_IRQ() super-handler another type was
 identified:
 
 -  Per CPU type
@@ -83,7 +83,7 @@
 (sub)architecture specific 'edge type' implementation.
 
 To make the transition to the new model easier and prevent the breakage
-of existing implementations, the :c:func:`__do_IRQ` super-handler is still
+of existing implementations, the __do_IRQ() super-handler is still
 available. This leads to a kind of duality for the time being. Over time
 the new model should be used in more and more architectures, as it
 enables smaller and cleaner IRQ subsystems. It's deprecated for three
@@ -116,7 +116,7 @@
 interrupt chip structure which are assigned to this interrupt.
 
 Whenever an interrupt triggers, the low-level architecture code calls
-into the generic interrupt code by calling :c:func:`desc->handle_irq`. This
+into the generic interrupt code by calling desc->handle_irq(). This
 high-level IRQ handling function only uses desc->irq_data.chip
 primitives referenced by the assigned chip descriptor structure.
 
@@ -125,27 +125,29 @@
 
 The high-level Driver API consists of following functions:
 
--  :c:func:`request_irq`
+-  request_irq()
 
--  :c:func:`free_irq`
+-  request_threaded_irq()
 
--  :c:func:`disable_irq`
+-  free_irq()
 
--  :c:func:`enable_irq`
+-  disable_irq()
 
--  :c:func:`disable_irq_nosync` (SMP only)
+-  enable_irq()
 
--  :c:func:`synchronize_irq` (SMP only)
+-  disable_irq_nosync() (SMP only)
 
--  :c:func:`irq_set_irq_type`
+-  synchronize_irq() (SMP only)
 
--  :c:func:`irq_set_irq_wake`
+-  irq_set_irq_type()
 
--  :c:func:`irq_set_handler_data`
+-  irq_set_irq_wake()
 
--  :c:func:`irq_set_chip`
+-  irq_set_handler_data()
 
--  :c:func:`irq_set_chip_data`
+-  irq_set_chip()
+
+-  irq_set_chip_data()
 
 See the autogenerated function documentation for details.
 
@@ -154,19 +156,19 @@
 
 The generic layer provides a set of pre-defined irq-flow methods:
 
--  :c:func:`handle_level_irq`
+-  handle_level_irq()
 
--  :c:func:`handle_edge_irq`
+-  handle_edge_irq()
 
--  :c:func:`handle_fasteoi_irq`
+-  handle_fasteoi_irq()
 
--  :c:func:`handle_simple_irq`
+-  handle_simple_irq()
 
--  :c:func:`handle_percpu_irq`
+-  handle_percpu_irq()
 
--  :c:func:`handle_edge_eoi_irq`
+-  handle_edge_eoi_irq()
 
--  :c:func:`handle_bad_irq`
+-  handle_bad_irq()
 
 The interrupt flow handlers (either pre-defined or architecture
 specific) are assigned to specific interrupts by the architecture either
@@ -325,14 +327,14 @@
 
 This per interrupt selectable feature, which was introduced by Russell
 King in the ARM interrupt implementation, does not mask an interrupt at
-the hardware level when :c:func:`disable_irq` is called. The interrupt is kept
+the hardware level when disable_irq() is called. The interrupt is kept
 enabled and is masked in the flow handler when an interrupt event
 happens. This prevents losing edge interrupts on hardware which does not
 store an edge interrupt event while the interrupt is disabled at the
 hardware level. When an interrupt arrives while the IRQ_DISABLED flag
 is set, then the interrupt is masked at the hardware level and the
 IRQ_PENDING bit is set. When the interrupt is re-enabled by
-:c:func:`enable_irq` the pending bit is checked and if it is set, the interrupt
+enable_irq() the pending bit is checked and if it is set, the interrupt
 is resent either via hardware or by a software resend mechanism. (It's
 necessary to enable CONFIG_HARDIRQS_SW_RESEND when you want to use
 the delayed interrupt disable feature and your hardware is not capable
@@ -369,7 +371,7 @@
 __do_IRQ entry point
 ====================
 
-The original implementation :c:func:`__do_IRQ` was an alternative entry point
+The original implementation __do_IRQ() was an alternative entry point
 for all types of interrupts. It no longer exists.
 
 This handler turned out to be not suitable for all interrupt hardware
diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst
index 939e3df..4aa82dd 100644
--- a/Documentation/core-api/memory-allocation.rst
+++ b/Documentation/core-api/memory-allocation.rst
@@ -88,10 +88,11 @@
 ==========================
 
 The most straightforward way to allocate memory is to use a function
-from the :c:func:`kmalloc` family. And, to be on the safe size it's
-best to use routines that set memory to zero, like
-:c:func:`kzalloc`. If you need to allocate memory for an array, there
-are :c:func:`kmalloc_array` and :c:func:`kcalloc` helpers.
+from the kmalloc() family. And, to be on the safe side it's best to use
+routines that set memory to zero, like kzalloc(). If you need to
+allocate memory for an array, there are kmalloc_array() and kcalloc()
+helpers. The helpers struct_size(), array_size() and array3_size() can
+be used to safely calculate object sizes without overflowing.
 
 The maximal size of a chunk that can be allocated with `kmalloc` is
 limited. The actual limit depends on the hardware and the kernel
@@ -102,29 +103,26 @@
 ARCH_KMALLOC_MINALIGN bytes.  For sizes which are a power of two, the
 alignment is also guaranteed to be at least the respective size.
 
-For large allocations you can use :c:func:`vmalloc` and
-:c:func:`vzalloc`, or directly request pages from the page
-allocator. The memory allocated by `vmalloc` and related functions is
-not physically contiguous.
+For large allocations you can use vmalloc() and vzalloc(), or directly
+request pages from the page allocator. The memory allocated by `vmalloc`
+and related functions is not physically contiguous.
 
 If you are not sure whether the allocation size is too large for
-`kmalloc`, it is possible to use :c:func:`kvmalloc` and its
-derivatives. It will try to allocate memory with `kmalloc` and if the
-allocation fails it will be retried with `vmalloc`. There are
-restrictions on which GFP flags can be used with `kvmalloc`; please
-see :c:func:`kvmalloc_node` reference documentation. Note that
-`kvmalloc` may return memory that is not physically contiguous.
+`kmalloc`, it is possible to use kvmalloc() and its derivatives. It will
+try to allocate memory with `kmalloc` and if the allocation fails it
+will be retried with `vmalloc`. There are restrictions on which GFP
+flags can be used with `kvmalloc`; please see kvmalloc_node() reference
+documentation. Note that `kvmalloc` may return memory that is not
+physically contiguous.
 
 If you need to allocate many identical objects you can use the slab
-cache allocator. The cache should be set up with
-:c:func:`kmem_cache_create` or :c:func:`kmem_cache_create_usercopy`
-before it can be used. The second function should be used if a part of
-the cache might be copied to the userspace.  After the cache is
-created :c:func:`kmem_cache_alloc` and its convenience wrappers can
-allocate memory from that cache.
+cache allocator. The cache should be set up with kmem_cache_create() or
+kmem_cache_create_usercopy() before it can be used. The second function
+should be used if a part of the cache might be copied to the userspace.
+After the cache is created kmem_cache_alloc() and its convenience
+wrappers can allocate memory from that cache.
 
-When the allocated memory is no longer needed it must be freed. You
-can use :c:func:`kvfree` for the memory allocated with `kmalloc`,
-`vmalloc` and `kvmalloc`. The slab caches should be freed with
-:c:func:`kmem_cache_free`. And don't forget to destroy the cache with
-:c:func:`kmem_cache_destroy`.
+When the allocated memory is no longer needed it must be freed. You can
+use kvfree() for the memory allocated with `kmalloc`, `vmalloc` and
+`kvmalloc`. The slab caches should be freed with kmem_cache_free(). And
+don't forget to destroy the cache with kmem_cache_destroy().
diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst
index 128e8a7..be72698 100644
--- a/Documentation/core-api/mm-api.rst
+++ b/Documentation/core-api/mm-api.rst
@@ -11,7 +11,7 @@
 .. kernel-doc:: arch/x86/lib/usercopy_32.c
    :export:
 
-.. kernel-doc:: mm/util.c
+.. kernel-doc:: mm/gup.c
    :functions: get_user_pages_fast
 
 .. _mm-api-gfp-flags:
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index ea21dd4..8ebe46b1 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -137,6 +137,20 @@
 grep'able. If in the future we need to modify the way the kernel handles
 printing pointers we will be better equipped to find the call sites.
 
+Pointer Differences
+-------------------
+
+::
+
+	%td	2560
+	%tx	a00
+
+For printing the pointer differences, use the %t modifier for ptrdiff_t.
+
+Example::
+
+	printk("test: difference between pointers: %td\n", ptr2 - ptr1);
+
 Struct Resources
 ----------------
 
diff --git a/Documentation/core-api/refcount-vs-atomic.rst b/Documentation/core-api/refcount-vs-atomic.rst
index 976e85a..79a009c 100644
--- a/Documentation/core-api/refcount-vs-atomic.rst
+++ b/Documentation/core-api/refcount-vs-atomic.rst
@@ -35,7 +35,7 @@
 program order (po) relation (on the same CPU). It guarantees that
 each ``atomic_*()`` and ``refcount_*()`` operation is atomic and instructions
 are executed in program order on a single CPU.
-This is implemented using :c:func:`READ_ONCE`/:c:func:`WRITE_ONCE` and
+This is implemented using READ_ONCE()/WRITE_ONCE() and
 compare-and-swap primitives.
 
 A strong (full) memory ordering guarantees that all prior loads and
@@ -44,7 +44,7 @@
 It also guarantees that all po-earlier stores on the same CPU
 and all propagated stores from other CPUs must propagate to all
 other CPUs before any po-later instruction is executed on the original
-CPU (A-cumulative property). This is implemented using :c:func:`smp_mb`.
+CPU (A-cumulative property). This is implemented using smp_mb().
 
 A RELEASE memory ordering guarantees that all prior loads and
 stores (all po-earlier instructions) on the same CPU are completed
@@ -52,14 +52,14 @@
 stores on the same CPU and all propagated stores from other CPUs
 must propagate to all other CPUs before the release operation
 (A-cumulative property). This is implemented using
-:c:func:`smp_store_release`.
+smp_store_release().
 
 An ACQUIRE memory ordering guarantees that all post loads and
 stores (all po-later instructions) on the same CPU are
 completed after the acquire operation. It also guarantees that all
 po-later stores on the same CPU must propagate to all other CPUs
 after the acquire operation executes. This is implemented using
-:c:func:`smp_acquire__after_ctrl_dep`.
+smp_acquire__after_ctrl_dep().
 
 A control dependency (on success) for refcounters guarantees that
 if a reference for an object was successfully obtained (reference
@@ -78,8 +78,8 @@
 
 Function changes:
 
- * :c:func:`atomic_set` --> :c:func:`refcount_set`
- * :c:func:`atomic_read` --> :c:func:`refcount_read`
+ * atomic_set() --> refcount_set()
+ * atomic_read() --> refcount_read()
 
 Memory ordering guarantee changes:
 
@@ -91,8 +91,8 @@
 
 Function changes:
 
- * :c:func:`atomic_inc` --> :c:func:`refcount_inc`
- * :c:func:`atomic_add` --> :c:func:`refcount_add`
+ * atomic_inc() --> refcount_inc()
+ * atomic_add() --> refcount_add()
 
 Memory ordering guarantee changes:
 
@@ -103,7 +103,7 @@
 
 Function changes:
 
- * :c:func:`atomic_dec` --> :c:func:`refcount_dec`
+ * atomic_dec() --> refcount_dec()
 
 Memory ordering guarantee changes:
 
@@ -115,8 +115,8 @@
 
 Function changes:
 
- * :c:func:`atomic_inc_not_zero` --> :c:func:`refcount_inc_not_zero`
- * no atomic counterpart --> :c:func:`refcount_add_not_zero`
+ * atomic_inc_not_zero() --> refcount_inc_not_zero()
+ * no atomic counterpart --> refcount_add_not_zero()
 
 Memory ordering guarantees changes:
 
@@ -131,8 +131,8 @@
 
 Function changes:
 
- * :c:func:`atomic_dec_and_test` --> :c:func:`refcount_dec_and_test`
- * :c:func:`atomic_sub_and_test` --> :c:func:`refcount_sub_and_test`
+ * atomic_dec_and_test() --> refcount_dec_and_test()
+ * atomic_sub_and_test() --> refcount_sub_and_test()
 
 Memory ordering guarantees changes:
 
@@ -144,14 +144,14 @@
 
 Function changes:
 
- * no atomic counterpart --> :c:func:`refcount_dec_if_one`
+ * no atomic counterpart --> refcount_dec_if_one()
  * ``atomic_add_unless(&var, -1, 1)`` --> ``refcount_dec_not_one(&var)``
 
 Memory ordering guarantees changes:
 
  * fully ordered --> RELEASE ordering + control dependency
 
-.. note:: :c:func:`atomic_add_unless` only provides full order on success.
+.. note:: atomic_add_unless() only provides full order on success.
 
 
 case 7) - lock-based RMW
@@ -159,10 +159,10 @@
 
 Function changes:
 
- * :c:func:`atomic_dec_and_lock` --> :c:func:`refcount_dec_and_lock`
- * :c:func:`atomic_dec_and_mutex_lock` --> :c:func:`refcount_dec_and_mutex_lock`
+ * atomic_dec_and_lock() --> refcount_dec_and_lock()
+ * atomic_dec_and_mutex_lock() --> refcount_dec_and_mutex_lock()
 
 Memory ordering guarantees changes:
 
  * fully ordered --> RELEASE ordering + control dependency + hold
-   :c:func:`spin_lock` on success
+   spin_lock() on success
diff --git a/Documentation/dev-tools/kmemleak.rst b/Documentation/dev-tools/kmemleak.rst
index 3621cd5..3a289e8 100644
--- a/Documentation/dev-tools/kmemleak.rst
+++ b/Documentation/dev-tools/kmemleak.rst
@@ -69,7 +69,7 @@
 
 Memory may be allocated or freed before kmemleak is initialised and
 these actions are stored in an early log buffer. The size of this buffer
-is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+is configured via the CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE option.
 
 If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
 disabled by default. Passing ``kmemleak=on`` on the kernel command
diff --git a/Documentation/devicetree/bindings/cpu/cpu-topology.txt b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
index 9991818..9bd530a 100644
--- a/Documentation/devicetree/bindings/cpu/cpu-topology.txt
+++ b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
@@ -549,5 +549,5 @@
 [2] Devicetree NUMA binding description
     Documentation/devicetree/bindings/numa.txt
 [3] RISC-V Linux kernel documentation
-    Documentation/devicetree/bindings/riscv/cpus.txt
+    Documentation/devicetree/bindings/riscv/cpus.yaml
 [4] https://www.devicetree.org/specifications/
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
index 0c7bd51..0b63ceb 100644
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -2,7 +2,7 @@
 ==========================================================
 
 For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.txt.
+Documentation/mips/ingenic-tcu.rst.
 
 Required properties:
 
diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst
index 192c36a..fff6604 100644
--- a/Documentation/doc-guide/kernel-doc.rst
+++ b/Documentation/doc-guide/kernel-doc.rst
@@ -476,6 +476,22 @@
     .. kernel-doc:: drivers/gpu/drm/i915/intel_audio.c
        :internal:
 
+identifiers: *[ function/type ...]*
+  Include documentation for each *function* and *type* in *source*.
+  If no *function* is specified, the documentation for all functions
+  and types in the *source* will be included.
+
+  Examples::
+
+    .. kernel-doc:: lib/bitmap.c
+       :identifiers: bitmap_parselist bitmap_parselist_user
+
+    .. kernel-doc:: lib/idr.c
+       :identifiers:
+
+functions: *[ function/type ...]*
+  This is an alias of the 'identifiers' directive and deprecated.
+
 doc: *title*
   Include documentation for the ``DOC:`` paragraph identified by *title* in
   *source*. Spaces are allowed in *title*; do not quote the *title*. The *title*
@@ -488,19 +504,6 @@
     .. kernel-doc:: drivers/gpu/drm/i915/intel_audio.c
        :doc: High Definition Audio over HDMI and Display Port
 
-functions: *[ function ...]*
-  Include documentation for each *function* in *source*.
-  If no *function* is specified, the documentation for all functions
-  and types in the *source* will be included.
-
-  Examples::
-
-    .. kernel-doc:: lib/bitmap.c
-       :functions: bitmap_parselist bitmap_parselist_user
-
-    .. kernel-doc:: lib/idr.c
-       :functions:
-
 Without options, the kernel-doc directive includes all documentation comments
 from the source file.
 
diff --git a/Documentation/driver-api/devfreq.rst b/Documentation/driver-api/devfreq.rst
new file mode 100644
index 0000000..4a0bf87
--- /dev/null
+++ b/Documentation/driver-api/devfreq.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Device Frequency Scaling
+========================
+
+Introduction
+------------
+
+This framework provides a standard kernel interface for Dynamic Voltage and
+Frequency Switching on arbitrary devices.
+
+It exposes controls for adjusting frequency through sysfs files which are
+similar to the cpufreq subsystem.
+
+Devices for which current usage can be measured can have their frequency
+automatically adjusted by governors.
+
+API
+---
+
+Device drivers need to initialize a :c:type:`devfreq_profile` and call the
+:c:func:`devfreq_add_device` function to create a :c:type:`devfreq` instance.
+
+.. kernel-doc:: include/linux/devfreq.h
+.. kernel-doc:: include/linux/devfreq-event.h
+.. kernel-doc:: drivers/devfreq/devfreq.c
+        :export:
+.. kernel-doc:: drivers/devfreq/devfreq-event.c
+        :export:
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 10ef357..2ff7431 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -500,7 +500,7 @@
   gpiochip. It will pass the struct gpio_chip* for the chip to all IRQ
   callbacks, so the callbacks need to embed the gpio_chip in its state
   container and obtain a pointer to the container using container_of().
-  (See Documentation/driver-model/design-patterns.txt)
+  (See Documentation/driver-api/driver-model/design-patterns.rst)
 
 - gpiochip_irqchip_add_nested(): adds a nested cascaded irqchip to a gpiochip,
   as discussed above regarding different types of cascaded irqchips. The
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 3bcd9a1..0ebe205 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -40,6 +40,7 @@
    ipmb
    i3c/index
    interconnect
+   devfreq
    hsi
    edac
    scsi
@@ -73,7 +74,6 @@
    connector
    console
    dcdbas
-   dell_rbu
    edid
    eisa
    ipmb
@@ -93,7 +93,6 @@
    pwm
    rfkill
    serial/index
-   sgi-ioc4
    sm501
    smsc_ece1099
    switchtec
diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst
index 6172f3c..06d98c4 100644
--- a/Documentation/driver-api/infrastructure.rst
+++ b/Documentation/driver-api/infrastructure.rst
@@ -49,9 +49,6 @@
 Device Drivers DMA Management
 -----------------------------
 
-.. kernel-doc:: kernel/dma/coherent.c
-   :export:
-
 .. kernel-doc:: kernel/dma/mapping.c
    :export:
 
diff --git a/Documentation/driver-api/interconnect.rst b/Documentation/driver-api/interconnect.rst
index c3e0048..cdeb5825 100644
--- a/Documentation/driver-api/interconnect.rst
+++ b/Documentation/driver-api/interconnect.rst
@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0
 
 =====================================
-GENERIC SYSTEM INTERCONNECT SUBSYSTEM
+Generic System Interconnect Subsystem
 =====================================
 
 Introduction
diff --git a/Documentation/driver-api/pti_intel_mid.rst b/Documentation/driver-api/pti_intel_mid.rst
index 20f1cff..bacc2a4 100644
--- a/Documentation/driver-api/pti_intel_mid.rst
+++ b/Documentation/driver-api/pti_intel_mid.rst
@@ -49,7 +49,9 @@
 the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
 and n_tracesink line discpline drivers but is a generic
 operation for a program to use a line discpline driver
-on a tty port other than the default n_tty::
+on a tty port other than the default n_tty:
+
+.. code-block:: c
 
   /////////// To hook up n_tracerouter and n_tracesink /////////
 
diff --git a/Documentation/filesystems/autofs.txt b/Documentation/filesystems/autofs.rst
similarity index 77%
rename from Documentation/filesystems/autofs.txt
rename to Documentation/filesystems/autofs.rst
index 3af38c7..681c6a4 100644
--- a/Documentation/filesystems/autofs.txt
+++ b/Documentation/filesystems/autofs.rst
@@ -1,12 +1,9 @@
-<head>
-<style> p { max-width:50em} ol, ul {max-width: 40em}</style>
-</head>
-
+=====================
 autofs - how it works
 =====================
 
 Purpose
--------
+=======
 
 The goal of autofs is to provide on-demand mounting and race free
 automatic unmounting of various other filesystems.  This provides two
@@ -28,7 +25,7 @@
    first accessed a name.
 
 Context
--------
+=======
 
 The "autofs" filesystem module is only one part of an autofs system.
 There also needs to be a user-space program which looks up names
@@ -43,7 +40,7 @@
 can each be managed separately, or all managed by the same daemon.
 
 Content
--------
+=======
 
 An autofs filesystem can contain 3 sorts of objects: directories,
 symbolic links and mount traps.  Mount traps are directories with
@@ -52,9 +49,10 @@
 Objects can only be created by the automount daemon: symlinks are
 created with a regular `symlink` system call, while directories and
 mount traps are created with `mkdir`.  The determination of whether a
-directory should be a mount trap or not is quite _ad hoc_, largely for
-historical reasons, and is determined in part by the
-*direct*/*indirect*/*offset* mount options, and the *maxproto* mount option.
+directory should be a mount trap is based on a master map. This master
+map is consulted by autofs to determine which directories are mount
+points. Mount points can be *direct*/*indirect*/*offset*.
+On most systems, the default master map is located at */etc/auto.master*.
 
 If neither the *direct* or *offset* mount options are given (so the
 mount is considered to be *indirect*), then the root directory is
@@ -80,7 +78,7 @@
 and whether the mount was *indirect* or not.
 
 Mount Traps
----------------
+===========
 
 A core element of the implementation of autofs is the Mount Traps
 which are provided by the Linux VFS.  Any directory provided by a
@@ -201,7 +199,7 @@
 
 
 Mountpoint expiry
------------------
+=================
 
 The VFS has a mechanism for automatically expiring unused mounts,
 much as it can expire any unused dentry information from the dcache.
@@ -301,7 +299,7 @@
 necessary), or has been aborted.
 
 Communicating with autofs: detecting the daemon
------------------------------------------------
+===============================================
 
 There are several forms of communication between the automount daemon
 and the filesystem.  As we have already seen, the daemon can create and
@@ -317,33 +315,39 @@
 provided through an ioctl as will be described below.
 
 Communicating with autofs: the event pipe
------------------------------------------
+=========================================
 
 When an autofs filesystem is mounted, the 'write' end of a pipe must
 be passed using the 'fd=' mount option.  autofs will write
 notification messages to this pipe for the daemon to respond to.
-For version 5, the format of the message is:
+For version 5, the format of the message is::
 
-        struct autofs_v5_packet {
-                int proto_version;                /* Protocol version */
-                int type;                        /* Type of packet */
-                autofs_wqt_t wait_queue_token;
-                __u32 dev;
-                __u64 ino;
-                __u32 uid;
-                __u32 gid;
-                __u32 pid;
-                __u32 tgid;
-                __u32 len;
-                char name[NAME_MAX+1];
+	struct autofs_v5_packet {
+		struct autofs_packet_hdr hdr;
+		autofs_wqt_t wait_queue_token;
+		__u32 dev;
+		__u64 ino;
+		__u32 uid;
+		__u32 gid;
+		__u32 pid;
+		__u32 tgid;
+		__u32 len;
+		char name[NAME_MAX+1];
         };
 
-where the type is one of
+And the format of the header is::
 
-        autofs_ptype_missing_indirect
-        autofs_ptype_expire_indirect
-        autofs_ptype_missing_direct
-        autofs_ptype_expire_direct
+	struct autofs_packet_hdr {
+		int proto_version;		/* Protocol version */
+		int type;			/* Type of packet */
+	};
+
+where the type is one of ::
+
+	autofs_ptype_missing_indirect
+	autofs_ptype_expire_indirect
+	autofs_ptype_missing_direct
+	autofs_ptype_expire_direct
 
 so messages can indicate that a name is missing (something tried to
 access it but it isn't there) or that it has been selected for expiry.
@@ -360,7 +364,7 @@
 `wait_queue_token`.
 
 Communicating with autofs: root directory ioctls
-------------------------------------------------
+================================================
 
 The root directory of an autofs filesystem will respond to a number of
 ioctls.  The process issuing the ioctl must have the CAP_SYS_ADMIN
@@ -368,58 +372,66 @@
 
 The available ioctl commands are:
 
-- **AUTOFS_IOC_READY**: a notification has been handled.  The argument
-    to the ioctl command is the "wait_queue_token" number
-    corresponding to the notification being acknowledged.
-- **AUTOFS_IOC_FAIL**: similar to above, but indicates failure with
-    the error code `ENOENT`.
-- **AUTOFS_IOC_CATATONIC**: Causes the autofs to enter "catatonic"
-    mode meaning that it stops sending notifications to the daemon.
-    This mode is also entered if a write to the pipe fails.
-- **AUTOFS_IOC_PROTOVER**:  This returns the protocol version in use.
-- **AUTOFS_IOC_PROTOSUBVER**: Returns the protocol sub-version which
-    is really a version number for the implementation.
-- **AUTOFS_IOC_SETTIMEOUT**:  This passes a pointer to an unsigned
-    long.  The value is used to set the timeout for expiry, and
-    the current timeout value is stored back through the pointer.
-- **AUTOFS_IOC_ASKUMOUNT**:  Returns, in the pointed-to `int`, 1 if
-    the filesystem could be unmounted.  This is only a hint as
-    the situation could change at any instant.  This call can be
-    used to avoid a more expensive full unmount attempt.
-- **AUTOFS_IOC_EXPIRE**: as described above, this asks if there is
-    anything suitable to expire.  A pointer to a packet:
+- **AUTOFS_IOC_READY**:
+	a notification has been handled.  The argument
+	to the ioctl command is the "wait_queue_token" number
+	corresponding to the notification being acknowledged.
+- **AUTOFS_IOC_FAIL**:
+	similar to above, but indicates failure with
+	the error code `ENOENT`.
+- **AUTOFS_IOC_CATATONIC**:
+	Causes the autofs to enter "catatonic"
+	mode meaning that it stops sending notifications to the daemon.
+	This mode is also entered if a write to the pipe fails.
+- **AUTOFS_IOC_PROTOVER**:
+	This returns the protocol version in use.
+- **AUTOFS_IOC_PROTOSUBVER**:
+	Returns the protocol sub-version which
+	is really a version number for the implementation.
+- **AUTOFS_IOC_SETTIMEOUT**:
+	This passes a pointer to an unsigned
+	long.  The value is used to set the timeout for expiry, and
+	the current timeout value is stored back through the pointer.
+- **AUTOFS_IOC_ASKUMOUNT**:
+	Returns, in the pointed-to `int`, 1 if
+	the filesystem could be unmounted.  This is only a hint as
+	the situation could change at any instant.  This call can be
+	used to avoid a more expensive full unmount attempt.
+- **AUTOFS_IOC_EXPIRE**:
+	as described above, this asks if there is
+	anything suitable to expire.  A pointer to a packet::
 
-        struct autofs_packet_expire_multi {
-                int proto_version;              /* Protocol version */
-                int type;                       /* Type of packet */
-                autofs_wqt_t wait_queue_token;
-                int len;
-                char name[NAME_MAX+1];
-        };
+		struct autofs_packet_expire_multi {
+			struct autofs_packet_hdr hdr;
+			autofs_wqt_t wait_queue_token;
+			int len;
+			char name[NAME_MAX+1];
+		};
 
-     is required.  This is filled in with the name of something
-     that can be unmounted or removed.  If nothing can be expired,
-     `errno` is set to `EAGAIN`.  Even though a `wait_queue_token`
-     is present in the structure, no "wait queue" is established
-     and no acknowledgment is needed.
-- **AUTOFS_IOC_EXPIRE_MULTI**:  This is similar to
-     **AUTOFS_IOC_EXPIRE** except that it causes notification to be
-     sent to the daemon, and it blocks until the daemon acknowledges.
-     The argument is an integer which can contain two different flags.
+	is required.  This is filled in with the name of something
+	that can be unmounted or removed.  If nothing can be expired,
+	`errno` is set to `EAGAIN`.  Even though a `wait_queue_token`
+	is present in the structure, no "wait queue" is established
+	and no acknowledgment is needed.
+- **AUTOFS_IOC_EXPIRE_MULTI**:
+	This is similar to
+	**AUTOFS_IOC_EXPIRE** except that it causes notification to be
+	sent to the daemon, and it blocks until the daemon acknowledges.
+	The argument is an integer which can contain two different flags.
 
-     **AUTOFS_EXP_IMMEDIATE** causes `last_used` time to be ignored
-     and objects are expired if the are not in use.
+	**AUTOFS_EXP_IMMEDIATE** causes `last_used` time to be ignored
+	and objects are expired if the are not in use.
 
-     **AUTOFS_EXP_FORCED** causes the in use status to be ignored
-     and objects are expired ieven if they are in use. This assumes
-     that the daemon has requested this because it is capable of
-     performing the umount.
+	**AUTOFS_EXP_FORCED** causes the in use status to be ignored
+	and objects are expired ieven if they are in use. This assumes
+	that the daemon has requested this because it is capable of
+	performing the umount.
 
-     **AUTOFS_EXP_LEAVES** will select a leaf rather than a top-level
-     name to expire.  This is only safe when *maxproto* is 4.
+	**AUTOFS_EXP_LEAVES** will select a leaf rather than a top-level
+	name to expire.  This is only safe when *maxproto* is 4.
 
 Communicating with autofs: char-device ioctls
----------------------------------------------
+=============================================
 
 It is not always possible to open the root of an autofs filesystem,
 particularly a *direct* mounted filesystem.  If the automount daemon
@@ -429,9 +441,9 @@
 which can be used to communicate directly with the autofs filesystem.
 It requires CAP_SYS_ADMIN for access.
 
-The `ioctl`s that can be used on this device are described in a separate
+The 'ioctl's that can be used on this device are described in a separate
 document `autofs-mount-control.txt`, and are summarised briefly here.
-Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure:
+Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 
         struct autofs_dev_ioctl {
                 __u32 ver_major;
@@ -469,41 +481,50 @@
 
 Commands are:
 
-- **AUTOFS_DEV_IOCTL_VERSION_CMD**: does nothing, except validate and
-    set version numbers.
-- **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD**: return an open file descriptor
-    on the root of an autofs filesystem.  The filesystem is identified
-    by name and device number, which is stored in `openmount.devid`.
-    Device numbers for existing filesystems can be found in
-    `/proc/self/mountinfo`.
-- **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**: same as `close(ioctlfd)`.
-- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: if the filesystem is in
-    catatonic mode, this can provide the write end of a new pipe
-    in `setpipefd.pipefd` to re-establish communication with a daemon.
-    The process group of the calling process is used to identify the
-    daemon.
-- **AUTOFS_DEV_IOCTL_REQUESTER_CMD**: `path` should be a
-    name within the filesystem that has been auto-mounted on.
-    On successful return, `requester.uid` and `requester.gid` will be
-    the UID and GID of the process which triggered that mount.
-- **AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD**: Check if path is a
-    mountpoint of a particular type - see separate documentation for
-    details.
-- **AUTOFS_DEV_IOCTL_PROTOVER_CMD**:
-- **AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD**:
-- **AUTOFS_DEV_IOCTL_READY_CMD**:
-- **AUTOFS_DEV_IOCTL_FAIL_CMD**:
-- **AUTOFS_DEV_IOCTL_CATATONIC_CMD**:
-- **AUTOFS_DEV_IOCTL_TIMEOUT_CMD**:
-- **AUTOFS_DEV_IOCTL_EXPIRE_CMD**:
-- **AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD**:  These all have the same
-    function as the similarly named **AUTOFS_IOC** ioctls, except
-    that **FAIL** can be given an explicit error number in `fail.status`
-    instead of assuming `ENOENT`, and this **EXPIRE** command
-    corresponds to **AUTOFS_IOC_EXPIRE_MULTI**.
+- **AUTOFS_DEV_IOCTL_VERSION_CMD**:
+	does nothing, except validate and
+	set version numbers.
+- **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD**:
+	return an open file descriptor
+	on the root of an autofs filesystem.  The filesystem is identified
+	by name and device number, which is stored in `openmount.devid`.
+	Device numbers for existing filesystems can be found in
+	`/proc/self/mountinfo`.
+- **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**:
+	same as `close(ioctlfd)`.
+- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**:
+	if the filesystem is in
+	catatonic mode, this can provide the write end of a new pipe
+	in `setpipefd.pipefd` to re-establish communication with a daemon.
+	The process group of the calling process is used to identify the
+	daemon.
+- **AUTOFS_DEV_IOCTL_REQUESTER_CMD**:
+	`path` should be a
+	name within the filesystem that has been auto-mounted on.
+	On successful return, `requester.uid` and `requester.gid` will be
+	the UID and GID of the process which triggered that mount.
+- **AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD**:
+	Check if path is a
+	mountpoint of a particular type - see separate documentation for
+	details.
+
+- **AUTOFS_DEV_IOCTL_PROTOVER_CMD**
+- **AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD**
+- **AUTOFS_DEV_IOCTL_READY_CMD**
+- **AUTOFS_DEV_IOCTL_FAIL_CMD**
+- **AUTOFS_DEV_IOCTL_CATATONIC_CMD**
+- **AUTOFS_DEV_IOCTL_TIMEOUT_CMD**
+- **AUTOFS_DEV_IOCTL_EXPIRE_CMD**
+- **AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD**
+
+These all have the same
+function as the similarly named **AUTOFS_IOC** ioctls, except
+that **FAIL** can be given an explicit error number in `fail.status`
+instead of assuming `ENOENT`, and this **EXPIRE** command
+corresponds to **AUTOFS_IOC_EXPIRE_MULTI**.
 
 Catatonic mode
---------------
+==============
 
 As mentioned, an autofs mount can enter "catatonic" mode.  This
 happens if a write to the notification pipe fails, or if it is
@@ -527,7 +548,7 @@
 **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD** ioctl on the `/dev/autofs`.
 
 The "ignore" mount option
--------------------------
+=========================
 
 The "ignore" mount option can be used to provide a generic indicator
 to applications that the mount entry should be ignored when displaying
@@ -542,18 +563,18 @@
 mounts from consideration when reading the mounts list.
 
 autofs, name spaces, and shared mounts
---------------------------------------
+======================================
 
 With bind mounts and name spaces it is possible for an autofs
 filesystem to appear at multiple places in one or more filesystem
 name spaces.  For this to work sensibly, the autofs filesystem should
-always be mounted "shared". e.g.
+always be mounted "shared". e.g. ::
 
-> `mount --make-shared /autofs/mount/point`
+	mount --make-shared /autofs/mount/point
 
 The automount daemon is only able to manage a single mount location for
 an autofs filesystem and if mounts on that are not 'shared', other
 locations will not behave as expected.  In particular access to those
-other locations will likely result in the `ELOOP` error
+other locations will likely result in the `ELOOP` error ::
 
-> Too many levels of symbolic links
+	Too many levels of symbolic links
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 2c3a9f76..ad6315a 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -46,4 +46,5 @@
 .. toctree::
    :maxdepth: 2
 
+   autofs
    virtiofs
diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst
index fc3a070..5057e4d 100644
--- a/Documentation/filesystems/locking.rst
+++ b/Documentation/filesystems/locking.rst
@@ -105,7 +105,7 @@
 listxattr:	no
 fiemap:		no
 update_time:	no
-atomic_open:	exclusive
+atomic_open:	shared (exclusive if O_CREAT is set in open flags)
 tmpfile:	no
 ============	=============================================
 
diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
index 292c0c2..4825046 100644
--- a/Documentation/hwmon/inspur-ipsps1.rst
+++ b/Documentation/hwmon/inspur-ipsps1.rst
@@ -17,7 +17,7 @@
 -----------
 
 This driver does not auto-detect devices. You will have to instantiate the
-devices explicitly. Please see Documentation/i2c/instantiating-devices for
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
 details.
 
 Sysfs entries
diff --git a/Documentation/i2c/busses/index.rst b/Documentation/i2c/busses/index.rst
index 97ca4d5..2a26e25 100644
--- a/Documentation/i2c/busses/index.rst
+++ b/Documentation/i2c/busses/index.rst
@@ -1,4 +1,4 @@
-. SPDX-License-Identifier: GPL-2.0
+.. SPDX-License-Identifier: GPL-2.0
 
 ===============
 I2C Bus Drivers
diff --git a/Documentation/i2c/index.rst b/Documentation/i2c/index.rst
index cd8d020..a0fbaf6 100644
--- a/Documentation/i2c/index.rst
+++ b/Documentation/i2c/index.rst
@@ -1,4 +1,4 @@
-. SPDX-License-Identifier: GPL-2.0
+.. SPDX-License-Identifier: GPL-2.0
 
 ===================
 I2C/SMBus Subsystem
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 2ceab19..e99d0bd 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -57,7 +57,6 @@
    :maxdepth: 2
 
    userspace-api/index
-   ioctl/index
 
 
 Introduction to kernel development
diff --git a/Documentation/maintainer/configure-git.rst b/Documentation/maintainer/configure-git.rst
index 78bbbb0..80ae5030 100644
--- a/Documentation/maintainer/configure-git.rst
+++ b/Documentation/maintainer/configure-git.rst
@@ -32,3 +32,33 @@
 ::
 
 	export GPG_TTY=$(tty)
+
+
+Creating commit links to lore.kernel.org
+----------------------------------------
+
+The web site http://lore.kernel.org is meant as a grand archive of all mail
+list traffic concerning or influencing the kernel development. Storing archives
+of patches here is a recommended practice, and when a maintainer applies a
+patch to a subsystem tree, it is a good idea to provide a Link: tag with a
+reference back to the lore archive so that people that browse the commit
+history can find related discussions and rationale behind a certain change.
+The link tag will look like this:
+
+    Link: https://lore.kernel.org/r/<message-id>
+
+This can be configured to happen automatically any time you issue ``git am``
+by adding the following hook into your git:
+
+.. code-block:: none
+
+	$ git config am.messageid true
+	$ cat >.git/hooks/applypatch-msg <<'EOF'
+	#!/bin/sh
+	. git-sh-setup
+	perl -pi -e 's|^Message-Id:\s*<?([^>]+)>?$|Link: https://lore.kernel.org/r/$1|g;' "$1"
+	test -x "$GIT_DIR/hooks/commit-msg" &&
+		exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
+	:
+	EOF
+	$ chmod a+x .git/hooks/applypatch-msg
diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst
index 56e2c09..d904e74 100644
--- a/Documentation/maintainer/index.rst
+++ b/Documentation/maintainer/index.rst
@@ -12,4 +12,5 @@
    configure-git
    rebasing-and-merging
    pull-requests
+   maintainer-entry-profile
 
diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst
new file mode 100644
index 0000000..3eaddc8
--- /dev/null
+++ b/Documentation/maintainer/maintainer-entry-profile.rst
@@ -0,0 +1,102 @@
+.. _maintainerentryprofile:
+
+Maintainer Entry Profile
+========================
+
+The Maintainer Entry Profile supplements the top-level process documents
+(submitting-patches, submitting drivers...) with
+subsystem/device-driver-local customs as well as details about the patch
+submission life-cycle. A contributor uses this document to level set
+their expectations and avoid common mistakes, maintainers may use these
+profiles to look across subsystems for opportunities to converge on
+common practices.
+
+
+Overview
+--------
+Provide an introduction to how the subsystem operates. While MAINTAINERS
+tells the contributor where to send patches for which files, it does not
+convey other subsystem-local infrastructure and mechanisms that aid
+development.
+
+Example questions to consider:
+
+- Are there notifications when patches are applied to the local tree, or
+  merged upstream?
+- Does the subsystem have a patchwork instance? Are patchwork state
+  changes notified?
+- Any bots or CI infrastructure that watches the list, or automated
+  testing feedback that the subsystem gates acceptance?
+- Git branches that are pulled into -next?
+- What branch should contributors submit against?
+- Links to any other Maintainer Entry Profiles? For example a
+  device-driver may point to an entry for its parent subsystem. This makes
+  the contributor aware of obligations a maintainer may have have for
+  other maintainers in the submission chain.
+
+
+Submit Checklist Addendum
+-------------------------
+List mandatory and advisory criteria, beyond the common "submit-checklist",
+for a patch to be considered healthy enough for maintainer attention.
+For example: "pass checkpatch.pl with no errors, or warning. Pass the
+unit test detailed at $URI".
+
+The Submit Checklist Addendum can also include details about the status
+of related hardware specifications. For example, does the subsystem
+require published specifications at a certain revision before patches
+will be considered.
+
+
+Key Cycle Dates
+---------------
+One of the common misunderstandings of submitters is that patches can be
+sent at any time before the merge window closes and can still be
+considered for the next -rc1. The reality is that most patches need to
+be settled in soaking in linux-next in advance of the merge window
+opening. Clarify for the submitter the key dates (in terms rc release
+week) that patches might considered for merging and when patches need to
+wait for the next -rc. At a minimum:
+
+- Last -rc for new feature submissions:
+  New feature submissions targeting the next merge window should have
+  their first posting for consideration before this point. Patches that
+  are submitted after this point should be clear that they are targeting
+  the NEXT+1 merge window, or should come with sufficient justification
+  why they should be considered on an expedited schedule. A general
+  guideline is to set expectation with contributors that new feature
+  submissions should appear before -rc5.
+
+- Last -rc to merge features: Deadline for merge decisions
+  Indicate to contributors the point at which an as yet un-applied patch
+  set will need to wait for the NEXT+1 merge window. Of course there is no
+  obligation to ever except any given patchset, but if the review has not
+  concluded by this point the expectation the contributor should wait and
+  resubmit for the following merge window.
+
+Optional:
+
+- First -rc at which the development baseline branch, listed in the
+  overview section, should be considered ready for new submissions.
+
+
+Review Cadence
+--------------
+One of the largest sources of contributor angst is how soon to ping
+after a patchset has been posted without receiving any feedback. In
+addition to specifying how long to wait before a resubmission this
+section can also indicate a preferred style of update like, resend the
+full series, or privately send a reminder email. This section might also
+list how review works for this code area and methods to get feedback
+that are not directly from the maintainer.
+
+Existing profiles
+-----------------
+
+For now, existing maintainer profiles are listed here; we will likely want
+to do something different in the near future.
+
+.. toctree::
+   :maxdepth: 1
+
+   ../nvdimm/maintainer-entry-profile
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 1adbb8a..ec3b586 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -63,7 +63,6 @@
 
      - Compiler barrier.
      - CPU memory barriers.
-     - MMIO write barrier.
 
  (*) Implicit kernel memory barriers.
 
@@ -75,7 +74,6 @@
  (*) Inter-CPU acquiring barrier effects.
 
      - Acquires vs memory accesses.
-     - Acquires vs I/O accesses.
 
  (*) Where are memory barriers needed?
 
@@ -492,10 +490,9 @@
      happen before it completes.
 
      The use of ACQUIRE and RELEASE operations generally precludes the need
-     for other sorts of memory barrier (but note the exceptions mentioned in
-     the subsection "MMIO write barrier").  In addition, a RELEASE+ACQUIRE
-     pair is -not- guaranteed to act as a full memory barrier.  However, after
-     an ACQUIRE on a given variable, all memory accesses preceding any prior
+     for other sorts of memory barrier.  In addition, a RELEASE+ACQUIRE pair is
+     -not- guaranteed to act as a full memory barrier.  However, after an
+     ACQUIRE on a given variable, all memory accesses preceding any prior
      RELEASE on that same variable are guaranteed to be visible.  In other
      words, within a given variable's critical section, all accesses of all
      previous critical sections for that variable are guaranteed to have
@@ -1512,8 +1509,6 @@
 
   (*) CPU memory barriers.
 
-  (*) MMIO write barrier.
-
 
 COMPILER BARRIER
 ----------------
diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst
index c4ef4c4..c5a646b 100644
--- a/Documentation/mips/ingenic-tcu.rst
+++ b/Documentation/mips/ingenic-tcu.rst
@@ -68,4 +68,4 @@
 drivers access their registers through the same regmap.
 
 For more information regarding the devicetree bindings of the TCU drivers,
-have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
+have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt.
diff --git a/Documentation/misc-devices/xilinx_sdfec.rst b/Documentation/misc-devices/xilinx_sdfec.rst
new file mode 100644
index 0000000..2245fcf
--- /dev/null
+++ b/Documentation/misc-devices/xilinx_sdfec.rst
@@ -0,0 +1,291 @@
+.. SPDX-License-Identifier: GPL-2.0+
+====================
+Xilinx SD-FEC Driver
+====================
+
+Overview
+========
+
+This driver supports SD-FEC Integrated Block for Zynq |Ultrascale+ (TM)| RFSoCs.
+
+.. |Ultrascale+ (TM)| unicode:: Ultrascale+ U+2122
+   .. with trademark sign
+
+For a full description of SD-FEC core features, see the `SD-FEC Product Guide (PG256) <https://www.xilinx.com/cgi-bin/docs/ipdoc?c=sd_fec;v=latest;d=pg256-sdfec-integrated-block.pdf>`_
+
+This driver supports the following features:
+
+  - Retrieval of the Integrated Block configuration and status information
+  - Configuration of LDPC codes
+  - Configuration of Turbo decoding
+  - Monitoring errors
+
+Missing features, known issues, and limitations of the SD-FEC driver are as
+follows:
+
+  - Only allows a single open file handler to any instance of the driver at any time
+  - Reset of the SD-FEC Integrated Block is not controlled by this driver
+  - Does not support shared LDPC code table wraparound
+
+The device tree entry is described in:
+`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.txt>`_
+
+
+Modes of Operation
+------------------
+
+The driver works with the SD-FEC core in two modes of operation:
+
+  - Run-time configuration
+  - Programmable Logic (PL) initialization
+
+
+Run-time Configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+For Run-time configuration the role of driver is to allow the software application to do the following:
+
+	- Load the configuration parameters for either Turbo decode or LDPC encode or decode
+	- Activate the SD-FEC core
+	- Monitor the SD-FEC core for errors
+	- Retrieve the status and configuration of the SD-FEC core
+
+Programmable Logic (PL) Initialization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For PL initialization, supporting logic loads configuration parameters for either
+the Turbo decode or LDPC encode or decode.  The role of the driver is to allow
+the software application to do the following:
+
+	- Activate the SD-FEC core
+	- Monitor the SD-FEC core for errors
+	- Retrieve the status and configuration of the SD-FEC core
+
+
+Driver Structure
+================
+
+The driver provides a platform device where the ``probe`` and ``remove``
+operations are provided.
+
+  - probe: Updates configuration register with device-tree entries plus determines the current activate state of the core, for example, is the core bypassed or has the core been started.
+
+
+The driver defines the following driver file operations to provide user
+application interfaces:
+
+  - open: Implements restriction that only a single file descriptor can be open per SD-FEC instance at any time
+  - release: Allows another file descriptor to be open, that is after current file descriptor is closed
+  - poll: Provides a method to monitor for SD-FEC Error events
+  - unlocked_ioctl: Provides the the following ioctl commands that allows the application configure the SD-FEC core:
+
+		- :c:macro:`XSDFEC_START_DEV`
+		- :c:macro:`XSDFEC_STOP_DEV`
+		- :c:macro:`XSDFEC_GET_STATUS`
+		- :c:macro:`XSDFEC_SET_IRQ`
+		- :c:macro:`XSDFEC_SET_TURBO`
+		- :c:macro:`XSDFEC_ADD_LDPC_CODE_PARAMS`
+		- :c:macro:`XSDFEC_GET_CONFIG`
+		- :c:macro:`XSDFEC_SET_ORDER`
+		- :c:macro:`XSDFEC_SET_BYPASS`
+		- :c:macro:`XSDFEC_IS_ACTIVE`
+		- :c:macro:`XSDFEC_CLEAR_STATS`
+		- :c:macro:`XSDFEC_SET_DEFAULT_CONFIG`
+
+
+Driver Usage
+============
+
+
+Overview
+--------
+
+After opening the driver, the user should find out what operations need to be
+performed to configure and activate the SD-FEC core and determine the
+configuration of the driver.
+The following outlines the flow the user should perform:
+
+  - Determine Configuration
+  - Set the order, if not already configured as desired
+  - Set Turbo decode, LPDC encode or decode parameters, depending on how the
+    SD-FEC core is configured plus if the SD-FEC has not been configured for PL
+    initialization
+  - Enable interrupts, if not already enabled
+  - Bypass the SD-FEC core, if required
+  - Start the SD-FEC core if not already started
+  - Get the SD-FEC core status
+  - Monitor for interrupts
+  - Stop the SD-FEC core
+
+
+Note: When monitoring for interrupts if a critical error is detected where a reset is required, the driver will be required to load the default configuration.
+
+
+Determine Configuration
+-----------------------
+
+Determine the configuration of the SD-FEC core by using the ioctl
+:c:macro:`XSDFEC_GET_CONFIG`.
+
+Set the Order
+-------------
+
+Setting the order determines how the order of Blocks can change from input to output.
+
+Setting the order is done by using the ioctl :c:macro:`XSDFEC_SET_ORDER`
+
+Setting the order can only be done if the following restrictions are met:
+
+	- The ``state`` member of struct :c:type:`xsdfec_status <xsdfec_status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
+
+
+Add LDPC Codes
+--------------
+
+The following steps indicate how to add LDPC codes to the SD-FEC core:
+
+	- Use the auto-generated parameters to fill the :c:type:`struct xsdfec_ldpc_params <xsdfec_ldpc_params>` for the desired LDPC code.
+	- Set the SC, QA, and LA table offsets for the LPDC parameters and the parameters in the structure :c:type:`struct xsdfec_ldpc_params <xsdfec_ldpc_params>`
+	- Set the desired Code Id value in the structure :c:type:`struct xsdfec_ldpc_params <xsdfec_ldpc_params>`
+	- Add the LPDC Code Parameters using the ioctl :c:macro:`XSDFEC_ADD_LDPC_CODE_PARAMS`
+	- For the applied LPDC Code Parameter use the function :c:func:`xsdfec_calculate_shared_ldpc_table_entry_size` to calculate the size of shared LPDC code tables. This allows the user to determine the shared table usage so when selecting the table offsets for the next LDPC code parameters unused table areas can be selected.
+	- Repeat for each LDPC code parameter.
+
+Adding LDPC codes can only be done if the following restrictions are met:
+
+	- The ``code`` member of :c:type:`struct xsdfec_config <xsdfec_config>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as LDPC
+	- The ``code_wr_protect`` of :c:type:`struct xsdfec_config <xsdfec_config>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates that write protection is not enabled
+	- The ``state`` member of struct :c:type:`xsdfec_status <xsdfec_status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not started
+
+Set Turbo Decode
+----------------
+
+Configuring the Turbo decode parameters is done by using the ioctl :c:macro:`XSDFEC_SET_TURBO` using auto-generated parameters to fill the :c:type:`struct xsdfec_turbo <xsdfec_turbo>` for the desired Turbo code.
+
+Adding Turbo decode can only be done if the following restrictions are met:
+
+	- The ``code`` member of :c:type:`struct xsdfec_config <xsdfec_config>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as TURBO
+	- The ``state`` member of struct :c:type:`xsdfec_status <xsdfec_status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
+
+Enable Interrupts
+-----------------
+
+Enabling or disabling interrupts is done by using the ioctl :c:macro:`XSDFEC_SET_IRQ`. The members of the parameter passed, :c:type:`struct xsdfec_irq <xsdfec_irq>`, to the ioctl are used to set and clear different categories of interrupts. The category of interrupt is controlled as following:
+
+  - ``enable_isr`` controls the ``tlast`` interrupts
+  - ``enable_ecc_isr`` controls the ECC interrupts
+
+If the ``code`` member of :c:type:`struct xsdfec_config <xsdfec_config>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as TURBO then the enabling ECC errors is not required.
+
+Bypass the SD-FEC
+-----------------
+
+Bypassing the SD-FEC is done by using the ioctl :c:macro:`XSDFEC_SET_BYPASS`
+
+Bypassing the SD-FEC can only be done if the following restrictions are met:
+
+	- The ``state`` member of :c:type:`struct xsdfec_status <xsdfec_status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
+
+Start the SD-FEC core
+---------------------
+
+Start the SD-FEC core by using the ioctl :c:macro:`XSDFEC_START_DEV`
+
+Get SD-FEC Status
+-----------------
+
+Get the SD-FEC status of the device by using the ioctl :c:macro:`XSDFEC_GET_STATUS`, which will fill the :c:type:`struct xsdfec_status <xsdfec_status>`
+
+Monitor for Interrupts
+----------------------
+
+	- Use the poll system call to monitor for an interrupt. The poll system call waits for an interrupt to wake it up or times out if no interrupt occurs.
+	- On return Poll ``revents`` will indicate whether stats and/or state have been updated
+		- ``POLLPRI`` indicates a critical error and the user should use :c:macro:`XSDFEC_GET_STATUS` and :c:macro:`XSDFEC_GET_STATS` to confirm
+		- ``POLLRDNORM`` indicates a non-critical error has occurred and the user should use  :c:macro:`XSDFEC_GET_STATS` to confirm
+	- Get stats by using the ioctl :c:macro:`XSDFEC_GET_STATS`
+		- For critical error the ``isr_err_count`` or ``uecc_count`` member  of :c:type:`struct xsdfec_stats <xsdfec_stats>` is non-zero
+		- For non-critical errors the ``cecc_count`` member of :c:type:`struct xsdfec_stats <xsdfec_stats>` is non-zero
+	- Get state by using the ioctl :c:macro:`XSDFEC_GET_STATUS`
+		- For a critical error the ``state`` of :c:type:`xsdfec_status <xsdfec_status>` will indicate a Reset Is Required
+	- Clear stats by using the ioctl :c:macro:`XSDFEC_CLEAR_STATS`
+
+If a critical error is detected where a reset is required. The application is required to call the ioctl :c:macro:`XSDFEC_SET_DEFAULT_CONFIG`, after the reset and it is not required to call the ioctl :c:macro:`XSDFEC_STOP_DEV`
+
+Note: Using poll system call prevents busy looping using :c:macro:`XSDFEC_GET_STATS` and :c:macro:`XSDFEC_GET_STATUS`
+
+Stop the SD-FEC Core
+---------------------
+
+Stop the device by using the ioctl :c:macro:`XSDFEC_STOP_DEV`
+
+Set the Default Configuration
+-----------------------------
+
+Load default configuration by using the ioctl :c:macro:`XSDFEC_SET_DEFAULT_CONFIG` to restore the driver.
+
+Limitations
+-----------
+
+Users should not duplicate SD-FEC device file handlers, for example fork() or dup() a process that has a created an SD-FEC file handler.
+
+Driver IOCTLs
+==============
+
+.. c:macro:: XSDFEC_START_DEV
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_START_DEV
+
+.. c:macro:: XSDFEC_STOP_DEV
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_STOP_DEV
+
+.. c:macro:: XSDFEC_GET_STATUS
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_GET_STATUS
+
+.. c:macro:: XSDFEC_SET_IRQ
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_SET_IRQ
+
+.. c:macro:: XSDFEC_SET_TURBO
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_SET_TURBO
+
+.. c:macro:: XSDFEC_ADD_LDPC_CODE_PARAMS
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_ADD_LDPC_CODE_PARAMS
+
+.. c:macro:: XSDFEC_GET_CONFIG
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_GET_CONFIG
+
+.. c:macro:: XSDFEC_SET_ORDER
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_SET_ORDER
+
+.. c:macro:: XSDFEC_SET_BYPASS
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_SET_BYPASS
+
+.. c:macro:: XSDFEC_IS_ACTIVE
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_IS_ACTIVE
+
+.. c:macro:: XSDFEC_CLEAR_STATS
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_CLEAR_STATS
+
+.. c:macro:: XSDFEC_GET_STATS
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_GET_STATS
+
+.. c:macro:: XSDFEC_SET_DEFAULT_CONFIG
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :doc: XSDFEC_SET_DEFAULT_CONFIG
+
+Driver Type Definitions
+=======================
+
+.. kernel-doc:: include/uapi/misc/xilinx_sdfec.h
+   :internal:
diff --git a/Documentation/networking/device_drivers/mellanox/mlx5.rst b/Documentation/networking/device_drivers/mellanox/mlx5.rst
index 7599dce..f575a49 100644
--- a/Documentation/networking/device_drivers/mellanox/mlx5.rst
+++ b/Documentation/networking/device_drivers/mellanox/mlx5.rst
@@ -279,7 +279,7 @@
 ================
 
 mlx5 driver provides internal trace points for tracking and debugging using
-kernel tracepoints interfaces (refer to Documentation/trace/ftrase.rst).
+kernel tracepoints interfaces (refer to Documentation/trace/ftrace.rst).
 
 For the list of support mlx5 events check /sys/kernel/debug/tracing/events/mlx5/
 
diff --git a/Documentation/networking/devlink-trap.rst b/Documentation/networking/devlink-trap.rst
index dc9659c..0331184 100644
--- a/Documentation/networking/devlink-trap.rst
+++ b/Documentation/networking/devlink-trap.rst
@@ -233,7 +233,7 @@
 links to the description of driver-specific traps registered by various device
 drivers:
 
-  * :doc:`/devlink-trap-netdevsim`
+  * :doc:`devlink-trap-netdevsim`
 
 Generic Packet Trap Groups
 ==========================
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index cda1c0a..e0a7c7a 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -73,7 +73,7 @@
 electrical signal interface using a synchronous 125Mhz clock signal and several
 data lines. Due to this design decision, a 1.5ns to 2ns delay must be added
 between the clock line (RXC or TXC) and the data lines to let the PHY (clock
-sink) have enough setup and hold times to sample the data lines correctly. The
+sink) have a large enough setup and hold time to sample the data lines correctly. The
 PHY library offers different types of PHY_INTERFACE_MODE_RGMII* values to let
 the PHY driver and optionally the MAC driver, implement the required delay. The
 values of phy_interface_t must be understood from the perspective of the PHY
diff --git a/Documentation/nvdimm/maintainer-entry-profile.rst b/Documentation/nvdimm/maintainer-entry-profile.rst
new file mode 100644
index 0000000..77081fd
--- /dev/null
+++ b/Documentation/nvdimm/maintainer-entry-profile.rst
@@ -0,0 +1,59 @@
+LIBNVDIMM Maintainer Entry Profile
+==================================
+
+Overview
+--------
+The libnvdimm subsystem manages persistent memory across multiple
+architectures. The mailing list, is tracked by patchwork here:
+https://patchwork.kernel.org/project/linux-nvdimm/list/
+...and that instance is configured to give feedback to submitters on
+patch acceptance and upstream merge. Patches are merged to either the
+'libnvdimm-fixes', or 'libnvdimm-for-next' branch. Those branches are
+available here:
+https://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git/
+
+In general patches can be submitted against the latest -rc, however if
+the incoming code change is dependent on other pending changes then the
+patch should be based on the libnvdimm-for-next branch. However, since
+persistent memory sits at the intersection of storage and memory there
+are cases where patches are more suitable to be merged through a
+Filesystem or the Memory Management tree. When in doubt copy the nvdimm
+list and the maintainers will help route.
+
+Submissions will be exposed to the kbuild robot for compile regression
+testing. It helps to get a success notification from that infrastructure
+before submitting, but it is not required.
+
+
+Submit Checklist Addendum
+-------------------------
+There are unit tests for the subsystem via the ndctl utility:
+https://github.com/pmem/ndctl
+Those tests need to be passed before the patches go upstream, but not
+necessarily before initial posting. Contact the list if you need help
+getting the test environment set up.
+
+### ACPI Device Specific Methods (_DSM)
+Before patches enabling for a new _DSM family will be considered it must
+be assigned a format-interface-code from the NVDIMM Sub-team of the ACPI
+Specification Working Group. In general, the stance of the subsystem is
+to push back on the proliferation of NVDIMM command sets, do strongly
+consider implementing support for an existing command set. See
+drivers/acpi/nfit/nfit.h for the set of support command sets.
+
+
+Key Cycle Dates
+---------------
+New submissions can be sent at any time, but if they intend to hit the
+next merge window they should be sent before -rc4, and ideally
+stabilized in the libnvdimm-for-next branch by -rc6. Of course if a
+patch set requires more than 2 weeks of review -rc4 is already too late
+and some patches may require multiple development cycles to review.
+
+
+Review Cadence
+--------------
+In general, please wait up to one week before pinging for feedback. A
+private mail reminder is preferred. Alternatively ask for other
+developers that have Reviewed-by tags for libnvdimm changes to take a
+look and offer their opinion.
diff --git a/Documentation/ioctl/botching-up-ioctls.rst b/Documentation/process/botching-up-ioctls.rst
similarity index 99%
rename from Documentation/ioctl/botching-up-ioctls.rst
rename to Documentation/process/botching-up-ioctls.rst
index ac697fe..2d4829b 100644
--- a/Documentation/ioctl/botching-up-ioctls.rst
+++ b/Documentation/process/botching-up-ioctls.rst
@@ -46,7 +46,7 @@
    conversion or worse, fiddle the raw __u64 through your code since that
    diminishes the checking tools like sparse can provide. The macro
    u64_to_user_ptr can be used in the kernel to avoid warnings about integers
-   and pointres of different sizes.
+   and pointers of different sizes.
 
 
 Basics
diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst
index a3c3349..799580a 100644
--- a/Documentation/process/embargoed-hardware-issues.rst
+++ b/Documentation/process/embargoed-hardware-issues.rst
@@ -240,7 +240,7 @@
 
   ============= ========================================================
   ARM
-  AMD
+  AMD		Tom Lendacky <tom.lendacky@amd.com>
   IBM
   Intel		Tony Luck <tony.luck@intel.com>
   Qualcomm	Trilok Soni <tsoni@codeaurora.org>
diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst
index e2c9ffc..21aa7d5 100644
--- a/Documentation/process/index.rst
+++ b/Documentation/process/index.rst
@@ -46,6 +46,7 @@
    kernel-docs
    deprecated
    embargoed-hardware-issues
+   maintainers
 
 These are some overall technical guides that have been put here for now for
 lack of a better place.
@@ -57,6 +58,7 @@
    adding-syscalls
    magic-number
    volatile-considered-harmful
+   botching-up-ioctls
    clang-format
 
 .. only::  subproject and html
diff --git a/Documentation/process/maintainers.rst b/Documentation/process/maintainers.rst
new file mode 100644
index 0000000..6174cfb
--- /dev/null
+++ b/Documentation/process/maintainers.rst
@@ -0,0 +1 @@
+.. maintainers-include::
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index fb56297..ba5e944 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -782,7 +782,58 @@
 the cover email text) to link to an earlier version of the patch series.
 
 
-16) Sending ``git pull`` requests
+16) Providing base tree information
+-----------------------------------
+
+When other developers receive your patches and start the review process,
+it is often useful for them to know where in the tree history they
+should place your work. This is particularly useful for automated CI
+processes that attempt to run a series of tests in order to establish
+the quality of your submission before the maintainer starts the review.
+
+If you are using ``git format-patch`` to generate your patches, you can
+automatically include the base tree information in your submission by
+using the ``--base`` flag. The easiest and most convenient way to use
+this option is with topical branches::
+
+    $ git checkout -t -b my-topical-branch master
+    Branch 'my-topical-branch' set up to track local branch 'master'.
+    Switched to a new branch 'my-topical-branch'
+
+    [perform your edits and commits]
+
+    $ git format-patch --base=auto --cover-letter -o outgoing/ master
+    outgoing/0000-cover-letter.patch
+    outgoing/0001-First-Commit.patch
+    outgoing/...
+
+When you open ``outgoing/0000-cover-letter.patch`` for editing, you will
+notice that it will have the ``base-commit:`` trailer at the very
+bottom, which provides the reviewer and the CI tools enough information
+to properly perform ``git am`` without worrying about conflicts::
+
+    $ git checkout -b patch-review [base-commit-id]
+    Switched to a new branch 'patch-review'
+    $ git am patches.mbox
+    Applying: First Commit
+    Applying: ...
+
+Please see ``man git-format-patch`` for more information about this
+option.
+
+.. note::
+
+    The ``--base`` feature was introduced in git version 2.9.0.
+
+If you are not using git to format your patches, you can still include
+the same ``base-commit`` trailer to indicate the commit hash of the tree
+on which your work is based. You should add it either in the cover
+letter or in the first patch of the series and it should be placed
+either below the ``---`` line or at the very bottom of all other
+content, right before your email signature.
+
+
+17) Sending ``git pull`` requests
 ---------------------------------
 
 If you have a series of patches, it may be most convenient to have the
diff --git a/Documentation/riscv/boot-image-header.rst b/Documentation/riscv/boot-image-header.rst
index 7b4d1d7..518d46d 100644
--- a/Documentation/riscv/boot-image-header.rst
+++ b/Documentation/riscv/boot-image-header.rst
@@ -21,7 +21,7 @@
 	u32 res1 = 0;		  /* Reserved */
 	u64 res2 = 0;		  /* Reserved */
 	u64 magic = 0x5643534952; /* Magic number, little endian, "RISCV" */
-	u32 magic2 = 0x56534905;  /* Magic number 2, little endian, "RSC\x05" */
+	u32 magic2 = 0x05435352;  /* Magic number 2, little endian, "RSC\x05" */
 	u32 res4;		  /* Reserved for PE COFF offset */
 
 This header format is compliant with PE/COFF header and largely inspired from
diff --git a/Documentation/scheduler/sched-stats.rst b/Documentation/scheduler/sched-stats.rst
index 0cb0aa7..dd9b99a 100644
--- a/Documentation/scheduler/sched-stats.rst
+++ b/Documentation/scheduler/sched-stats.rst
@@ -28,7 +28,7 @@
 the change in the counters at each subsequent observation.  A perl script
 which does this for many of the fields is available at
 
-    http://eaglet.rain.com/rick/linux/schedstat/
+    http://eaglet.pdxhosts.com/rick/linux/schedstat/
 
 Note that any such script will necessarily be version-specific, as the main
 reason to change versions is changes in the output format.  For those wishing
@@ -164,4 +164,4 @@
 under the scheduler's policies.  A simple version of such a program is
 available at
 
-    http://eaglet.rain.com/rick/linux/schedstat/v12/latency.c
+    http://eaglet.pdxhosts.com/rick/linux/schedstat/v12/latency.c
diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst
index d6d8b0b..d9b0b85 100644
--- a/Documentation/security/keys/core.rst
+++ b/Documentation/security/keys/core.rst
@@ -1102,7 +1102,7 @@
     See also Documentation/security/keys/request-key.rst.
 
 
- *  To search for a key in a specific domain, call:
+ *  To search for a key in a specific domain, call::
 
 	struct key *request_key_tag(const struct key_type *type,
 				    const char *description,
diff --git a/Documentation/security/lsm.rst b/Documentation/security/lsm.rst
index ad4dfd0..aadf47c 100644
--- a/Documentation/security/lsm.rst
+++ b/Documentation/security/lsm.rst
@@ -56,7 +56,7 @@
 also moves most of the capabilities logic into an optional security
 module, with the system defaulting to the traditional superuser logic.
 This capabilities module is discussed further in
-`LSM Capabilities Module <#cap>`__.
+`LSM Capabilities Module`_.
 
 The LSM kernel patch adds security fields to kernel data structures and
 inserts calls to hook functions at critical points in the kernel code to
diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css
index e21e36c..459ec5b 100644
--- a/Documentation/sphinx-static/theme_overrides.css
+++ b/Documentation/sphinx-static/theme_overrides.css
@@ -53,6 +53,16 @@
     line-height: normal;
 }
 
+/* Keep fields from being strangely far apart due to inheirited table CSS. */
+.rst-content table.field-list th.field-name {
+    padding-top: 1px;
+    padding-bottom: 1px;
+}
+.rst-content table.field-list td.field-body {
+    padding-top: 1px;
+    padding-bottom: 1px;
+}
+
 @media screen {
 
     /* content column
diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py
index 1159405..4bcbd6a 100644
--- a/Documentation/sphinx/kerneldoc.py
+++ b/Documentation/sphinx/kerneldoc.py
@@ -59,9 +59,10 @@
     optional_arguments = 4
     option_spec = {
         'doc': directives.unchanged_required,
-        'functions': directives.unchanged,
         'export': directives.unchanged,
         'internal': directives.unchanged,
+        'identifiers': directives.unchanged,
+        'functions': directives.unchanged,
     }
     has_content = False
 
@@ -77,6 +78,10 @@
 
         tab_width = self.options.get('tab-width', self.state.document.settings.tab_width)
 
+        # 'function' is an alias of 'identifiers'
+        if 'functions' in self.options:
+            self.options['identifiers'] = self.options.get('functions')
+
         # FIXME: make this nicer and more robust against errors
         if 'export' in self.options:
             cmd += ['-export']
@@ -86,11 +91,11 @@
             export_file_patterns = str(self.options.get('internal')).split()
         elif 'doc' in self.options:
             cmd += ['-function', str(self.options.get('doc'))]
-        elif 'functions' in self.options:
-            functions = self.options.get('functions').split()
-            if functions:
-                for f in functions:
-                    cmd += ['-function', f]
+        elif 'identifiers' in self.options:
+            identifiers = self.options.get('identifiers').split()
+            if identifiers:
+                for i in identifiers:
+                    cmd += ['-function', i]
             else:
                 cmd += ['-no-doc-sections']
 
diff --git a/Documentation/sphinx/maintainers_include.py b/Documentation/sphinx/maintainers_include.py
new file mode 100755
index 0000000..dc8fed4
--- /dev/null
+++ b/Documentation/sphinx/maintainers_include.py
@@ -0,0 +1,197 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: GPL-2.0
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=R0903, C0330, R0914, R0912, E0401
+
+u"""
+    maintainers-include
+    ~~~~~~~~~~~~~~~~~~~
+
+    Implementation of the ``maintainers-include`` reST-directive.
+
+    :copyright:  Copyright (C) 2019  Kees Cook <keescook@chromium.org>
+    :license:    GPL Version 2, June 1991 see linux/COPYING for details.
+
+    The ``maintainers-include`` reST-directive performs extensive parsing
+    specific to the Linux kernel's standard "MAINTAINERS" file, in an
+    effort to avoid needing to heavily mark up the original plain text.
+"""
+
+import sys
+import re
+import os.path
+
+from docutils import statemachine
+from docutils.utils.error_reporting import ErrorString
+from docutils.parsers.rst import Directive
+from docutils.parsers.rst.directives.misc import Include
+
+__version__  = '1.0'
+
+def setup(app):
+    app.add_directive("maintainers-include", MaintainersInclude)
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+class MaintainersInclude(Include):
+    u"""MaintainersInclude (``maintainers-include``) directive"""
+    required_arguments = 0
+
+    def parse_maintainers(self, path):
+        """Parse all the MAINTAINERS lines into ReST for human-readability"""
+
+        result = list()
+        result.append(".. _maintainers:")
+        result.append("")
+
+        # Poor man's state machine.
+        descriptions = False
+        maintainers = False
+        subsystems = False
+
+        # Field letter to field name mapping.
+        field_letter = None
+        fields = dict()
+
+        prev = None
+        field_prev = ""
+        field_content = ""
+
+        for line in open(path):
+            if sys.version_info.major == 2:
+                line = unicode(line, 'utf-8')
+            # Have we reached the end of the preformatted Descriptions text?
+            if descriptions and line.startswith('Maintainers'):
+                descriptions = False
+                # Ensure a blank line following the last "|"-prefixed line.
+                result.append("")
+
+            # Start subsystem processing? This is to skip processing the text
+            # between the Maintainers heading and the first subsystem name.
+            if maintainers and not subsystems:
+                if re.search('^[A-Z0-9]', line):
+                    subsystems = True
+
+            # Drop needless input whitespace.
+            line = line.rstrip()
+
+            # Linkify all non-wildcard refs to ReST files in Documentation/.
+            pat = '(Documentation/([^\s\?\*]*)\.rst)'
+            m = re.search(pat, line)
+            if m:
+                # maintainers.rst is in a subdirectory, so include "../".
+                line = re.sub(pat, ':doc:`%s <../%s>`' % (m.group(2), m.group(2)), line)
+
+            # Check state machine for output rendering behavior.
+            output = None
+            if descriptions:
+                # Escape the escapes in preformatted text.
+                output = "| %s" % (line.replace("\\", "\\\\"))
+                # Look for and record field letter to field name mappings:
+                #   R: Designated *reviewer*: FullName <address@domain>
+                m = re.search("\s(\S):\s", line)
+                if m:
+                    field_letter = m.group(1)
+                if field_letter and not field_letter in fields:
+                    m = re.search("\*([^\*]+)\*", line)
+                    if m:
+                        fields[field_letter] = m.group(1)
+            elif subsystems:
+                # Skip empty lines: subsystem parser adds them as needed.
+                if len(line) == 0:
+                    continue
+                # Subsystem fields are batched into "field_content"
+                if line[1] != ':':
+                    # Render a subsystem entry as:
+                    #   SUBSYSTEM NAME
+                    #   ~~~~~~~~~~~~~~
+
+                    # Flush pending field content.
+                    output = field_content + "\n\n"
+                    field_content = ""
+
+                    # Collapse whitespace in subsystem name.
+                    heading = re.sub("\s+", " ", line)
+                    output = output + "%s\n%s" % (heading, "~" * len(heading))
+                    field_prev = ""
+                else:
+                    # Render a subsystem field as:
+                    #   :Field: entry
+                    #           entry...
+                    field, details = line.split(':', 1)
+                    details = details.strip()
+
+                    # Mark paths (and regexes) as literal text for improved
+                    # readability and to escape any escapes.
+                    if field in ['F', 'N', 'X', 'K']:
+                        # But only if not already marked :)
+                        if not ':doc:' in details:
+                            details = '``%s``' % (details)
+
+                    # Comma separate email field continuations.
+                    if field == field_prev and field_prev in ['M', 'R', 'L']:
+                        field_content = field_content + ","
+
+                    # Do not repeat field names, so that field entries
+                    # will be collapsed together.
+                    if field != field_prev:
+                        output = field_content + "\n"
+                        field_content = ":%s:" % (fields.get(field, field))
+                    field_content = field_content + "\n\t%s" % (details)
+                    field_prev = field
+            else:
+                output = line
+
+            # Re-split on any added newlines in any above parsing.
+            if output != None:
+                for separated in output.split('\n'):
+                    result.append(separated)
+
+            # Update the state machine when we find heading separators.
+            if line.startswith('----------'):
+                if prev.startswith('Descriptions'):
+                    descriptions = True
+                if prev.startswith('Maintainers'):
+                    maintainers = True
+
+            # Retain previous line for state machine transitions.
+            prev = line
+
+        # Flush pending field contents.
+        if field_content != "":
+            for separated in field_content.split('\n'):
+                result.append(separated)
+
+        output = "\n".join(result)
+        # For debugging the pre-rendered results...
+        #print(output, file=open("/tmp/MAINTAINERS.rst", "w"))
+
+        self.state_machine.insert_input(
+          statemachine.string2lines(output), path)
+
+    def run(self):
+        """Include the MAINTAINERS file as part of this reST file."""
+        if not self.state.document.settings.file_insertion_enabled:
+            raise self.warning('"%s" directive disabled.' % self.name)
+
+        # Walk up source path directories to find Documentation/../
+        path = self.state_machine.document.attributes['source']
+        path = os.path.realpath(path)
+        tail = path
+        while tail != "Documentation" and tail != "":
+            (path, tail) = os.path.split(path)
+
+        # Append "MAINTAINERS"
+        path = os.path.join(path, "MAINTAINERS")
+
+        try:
+            self.state.document.settings.record_dependencies.add(path)
+            lines = self.parse_maintainers(path)
+        except IOError as error:
+            raise self.severe('Problems with "%s" directive path:\n%s.' %
+                      (self.name, ErrorString(error)))
+
+        return []
diff --git a/Documentation/sphinx/parallel-wrapper.sh b/Documentation/sphinx/parallel-wrapper.sh
new file mode 100644
index 0000000..7daf513
--- /dev/null
+++ b/Documentation/sphinx/parallel-wrapper.sh
@@ -0,0 +1,33 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Figure out if we should follow a specific parallelism from the make
+# environment (as exported by scripts/jobserver-exec), or fall back to
+# the "auto" parallelism when "-jN" is not specified at the top-level
+# "make" invocation.
+
+sphinx="$1"
+shift || true
+
+parallel="$PARALLELISM"
+if [ -z "$parallel" ] ; then
+	# If no parallelism is specified at the top-level make, then
+	# fall back to the expected "-jauto" mode that the "htmldocs"
+	# target has had.
+	auto=$(perl -e 'open IN,"'"$sphinx"' --version 2>&1 |";
+			while (<IN>) {
+				if (m/([\d\.]+)/) {
+					print "auto" if ($1 >= "1.7")
+				}
+			}
+			close IN')
+	if [ -n "$auto" ] ; then
+		parallel="$auto"
+	fi
+fi
+# Only if some parallelism has been determined do we add the -jN option.
+if [ -n "$parallel" ] ; then
+	parallel="-j$parallel"
+fi
+
+exec "$sphinx" "$parallel" "$@"
diff --git a/Documentation/trace/coresight-cpu-debug.rst b/Documentation/trace/coresight/coresight-cpu-debug.rst
similarity index 100%
rename from Documentation/trace/coresight-cpu-debug.rst
rename to Documentation/trace/coresight/coresight-cpu-debug.rst
diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
new file mode 100644
index 0000000..b64d9a9
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
@@ -0,0 +1,798 @@
+===============================================
+ETMv4 sysfs linux driver programming reference.
+===============================================
+
+    :Author:   Mike Leach <mike.leach@linaro.org>
+    :Date:     October 11th, 2019
+
+Supplement to existing ETMv4 driver documentation.
+
+Sysfs files and directories
+---------------------------
+
+Root: ``/sys/bus/coresight/devices/etm<N>``
+
+
+The following paragraphs explain the association between sysfs files and the
+ETMv4 registers that they effect. Note the register names are given without
+the ‘TRC’ prefix.
+
+----
+
+:File:            ``mode`` (rw)
+:Trace Registers: {CONFIGR + others}
+:Notes:
+    Bit select trace features. See ‘mode’ section below. Bits
+    in this will cause equivalent programming of trace config and
+    other registers to enable the features requested.
+
+:Syntax & eg:
+    ``echo bitfield > mode``
+
+    bitfield up to 32 bits setting trace features.
+
+:Example:
+    ``$> echo 0x012 > mode``
+
+----
+
+:File:            ``reset`` (wo)
+:Trace Registers: All
+:Notes:
+    Reset all programming to trace nothing / no logic programmed.
+
+:Syntax:
+    ``echo 1 > reset``
+
+----
+
+:File:            ``enable_source`` (wo)
+:Trace Registers: PRGCTLR, All hardware regs.
+:Notes:
+    - > 0 : Programs up the hardware with the current values held in the driver
+      and enables trace.
+
+    - = 0 : disable trace hardware.
+
+:Syntax:
+    ``echo 1 > enable_source``
+
+----
+
+:File:            ``cpu`` (ro)
+:Trace Registers: None.
+:Notes:
+    CPU ID that this ETM is attached to.
+
+:Example:
+    ``$> cat cpu``
+
+    ``$> 0``
+
+----
+
+:File:            ``addr_idx`` (rw)
+:Trace Registers: None.
+:Notes:
+    Virtual register to index address comparator and range
+    features. Set index for first of the pair in a range.
+
+:Syntax:
+    ``echo idx > addr_idx``
+
+    Where idx < nr_addr_cmp x 2
+
+----
+
+:File:            ``addr_range`` (rw)
+:Trace Registers: ACVR[idx, idx+1], VIIECTLR
+:Notes:
+    Pair of addresses for a range selected by addr_idx. Include
+    / exclude according to the optional parameter, or if omitted
+    uses the current ‘mode’ setting. Select comparator range in
+    control register. Error if index is odd value.
+
+:Depends: ``mode, addr_idx``
+:Syntax:
+   ``echo addr1 addr2 [exclude] > addr_range``
+
+   Where addr1 and addr2 define the range and addr1 < addr2.
+
+   Optional exclude value:-
+
+   - 0 for include
+   - 1 for exclude.
+:Example:
+   ``$> echo 0x0000 0x2000 0 > addr_range``
+
+----
+
+:File:            ``addr_single`` (rw)
+:Trace Registers: ACVR[idx]
+:Notes:
+    Set a single address comparator according to addr_idx. This
+    is used if the address comparator is used as part of event
+    generation logic etc.
+
+:Depends: ``addr_idx``
+:Syntax:
+   ``echo addr1 > addr_single``
+
+----
+
+:File:           ``addr_start`` (rw)
+:Trace Registers: ACVR[idx], VISSCTLR
+:Notes:
+    Set a trace start address comparator according to addr_idx.
+    Select comparator in control register.
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``echo addr1 > addr_start``
+
+----
+
+:File:            ``addr_stop`` (rw)
+:Trace Registers: ACVR[idx], VISSCTLR
+:Notes:
+    Set a trace stop address comparator according to addr_idx.
+    Select comparator in control register.
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``echo addr1 > addr_stop``
+
+----
+
+:File:            ``addr_context`` (rw)
+:Trace Registers: ACATR[idx,{6:4}]
+:Notes:
+    Link context ID comparator to address comparator addr_idx
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``echo ctxt_idx > addr_context``
+
+    Where ctxt_idx is the index of the linked context id / vmid
+    comparator.
+
+----
+
+:File:            ``addr_ctxtype`` (rw)
+:Trace Registers: ACATR[idx,{3:2}]
+:Notes:
+    Input value string. Set type for linked context ID comparator
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``echo type > addr_ctxtype``
+
+    Type one of {all, vmid, ctxid, none}
+:Example:
+    ``$> echo ctxid > addr_ctxtype``
+
+----
+
+:File:            ``addr_exlevel_s_ns`` (rw)
+:Trace Registers: ACATR[idx,{14:8}]
+:Notes:
+    Set the ELx secure and non-secure matching bits for the
+    selected address comparator
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``echo val > addr_exlevel_s_ns``
+
+    val is a 7 bit value for exception levels to exclude. Input
+    value shifted to correct bits in register.
+:Example:
+    ``$> echo 0x4F > addr_exlevel_s_ns``
+
+----
+
+:File:            ``addr_instdatatype`` (rw)
+:Trace Registers: ACATR[idx,{1:0}]
+:Notes:
+    Set the comparator address type for matching. Driver only
+    supports setting instruction address type.
+
+:Depends: ``addr_idx``
+
+----
+
+:File:            ``addr_cmp_view`` (ro)
+:Trace Registers: ACVR[idx, idx+1], ACATR[idx], VIIECTLR
+:Notes:
+    Read the currently selected address comparator. If part of
+    address range then display both addresses.
+
+:Depends: ``addr_idx``
+:Syntax:
+    ``cat addr_cmp_view``
+:Example:
+    ``$> cat addr_cmp_view``
+
+   ``addr_cmp[0] range 0x0 0xffffffffffffffff include ctrl(0x4b00)``
+
+----
+
+:File:            ``nr_addr_cmp`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of address comparator pairs
+
+----
+
+:File:            ``sshot_idx`` (rw)
+:Trace Registers: None
+:Notes:
+    Select single shot register set.
+
+----
+
+:File:            ``sshot_ctrl`` (rw)
+:Trace Registers: SSCCR[idx]
+:Notes:
+    Access a single shot comparator control register.
+
+:Depends: ``sshot_idx``
+:Syntax:
+    ``echo val > sshot_ctrl``
+
+    Writes val into the selected control register.
+
+----
+
+:File:            ``sshot_status`` (ro)
+:Trace Registers: SSCSR[idx]
+:Notes:
+    Read a single shot comparator status register
+
+:Depends: ``sshot_idx``
+:Syntax:
+    ``cat sshot_status``
+
+    Read status.
+:Example:
+    ``$> cat sshot_status``
+
+    ``0x1``
+
+----
+
+:File:            ``sshot_pe_ctrl`` (rw)
+:Trace Registers: SSPCICR[idx]
+:Notes:
+    Access a single shot PE comparator input control register.
+
+:Depends: ``sshot_idx``
+:Syntax:
+    ``echo val > sshot_pe_ctrl``
+
+    Writes val into the selected control register.
+
+----
+
+:File:            ``ns_exlevel_vinst`` (rw)
+:Trace Registers: VICTLR{23:20}
+:Notes:
+    Program non-secure exception level filters. Set / clear NS
+    exception filter bits. Setting ‘1’ excludes trace from the
+    exception level.
+
+:Syntax:
+    ``echo bitfield > ns_exlevel_viinst``
+
+    Where bitfield contains bits to set clear for EL0 to EL2
+:Example:
+    ``%> echo 0x4 > ns_exlevel_viinst``
+
+    Excludes EL2 NS trace.
+
+----
+
+:File:            ``vinst_pe_cmp_start_stop`` (rw)
+:Trace Registers: VIPCSSCTLR
+:Notes:
+    Access PE start stop comparator input control registers
+
+----
+
+:File:            ``bb_ctrl`` (rw)
+:Trace Registers: BBCTLR
+:Notes:
+    Define ranges that Branch Broadcast will operate in.
+    Default (0x0) is all addresses.
+
+:Depends: BB enabled.
+
+----
+
+:File:            ``cyc_threshold`` (rw)
+:Trace Registers: CCCTLR
+:Notes:
+    Set the threshold for which cycle counts will be emitted.
+    Error if attempt to set below minimum defined in IDR3, masked
+    to width of valid bits.
+
+:Depends: CC enabled.
+
+----
+
+:File:            ``syncfreq`` (rw)
+:Trace Registers: SYNCPR
+:Notes:
+    Set trace synchronisation period. Power of 2 value, 0 (off)
+    or 8-20. Driver defaults to 12 (every 4096 bytes).
+
+----
+
+:File:            ``cntr_idx`` (rw)
+:Trace Registers: none
+:Notes:
+    Select the counter to access
+
+:Syntax:
+    ``echo idx > cntr_idx``
+
+    Where idx < nr_cntr
+
+----
+
+:File:            ``cntr_ctrl`` (rw)
+:Trace Registers: CNTCTLR[idx]
+:Notes:
+    Set counter control value.
+
+:Depends: ``cntr_idx``
+:Syntax:
+    ``echo val > cntr_ctrl``
+
+    Where val is per ETMv4 spec.
+
+----
+
+:File:            ``cntrldvr`` (rw)
+:Trace Registers: CNTRLDVR[idx]
+:Notes:
+    Set counter reload value.
+
+:Depends: ``cntr_idx``
+:Syntax:
+    ``echo val > cntrldvr``
+
+    Where val is per ETMv4 spec.
+
+----
+
+:File:            ``nr_cntr`` (ro)
+:Trace Registers: From IDR5
+
+:Notes:
+    Number of counters implemented.
+
+----
+
+:File:            ``ctxid_idx`` (rw)
+:Trace Registers: None
+:Notes:
+    Select the context ID comparator to access
+
+:Syntax:
+    ``echo idx > ctxid_idx``
+
+    Where idx < numcidc
+
+----
+
+:File:            ``ctxid_pid`` (rw)
+:Trace Registers: CIDCVR[idx]
+:Notes:
+   Set the context ID comparator value
+
+:Depends: ``ctxid_idx``
+
+----
+
+:File: ``ctxid_masks`` (rw)
+:Trace Registers: CIDCCTLR0, CIDCCTLR1, CIDCVR<0-7>
+:Notes:
+    Pair of values to set the byte masks for 1-8 context ID
+    comparators. Automatically clears masked bytes to 0 in CID
+    value registers.
+
+:Syntax:
+    ``echo m3m2m1m0 [m7m6m5m4] > ctxid_masks``
+
+    32 bit values made up of mask bytes, where mN represents a
+    byte mask value for Context ID comparator N.
+
+    Second value not required on systems that have fewer than 4
+    context ID comparators
+
+----
+
+:File:            ``numcidc`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of Context ID comparators
+
+----
+
+:File:            ``vmid_idx`` (rw)
+:Trace Registers: None
+:Notes:
+    Select the VM ID comparator to access.
+
+:Syntax:
+    ``echo idx > vmid_idx``
+
+    Where idx <  numvmidc
+
+----
+
+:File:            ``vmid_val`` (rw)
+:Trace Registers: VMIDCVR[idx]
+:Notes:
+    Set the VM ID comparator value
+
+:Depends: ``vmid_idx``
+
+----
+
+:File:            ``vmid_masks`` (rw)
+:Trace Registers: VMIDCCTLR0, VMIDCCTLR1, VMIDCVR<0-7>
+:Notes:
+    Pair of values to set the byte masks for 1-8 VM ID comparators.
+    Automatically clears masked bytes to 0 in VMID value registers.
+
+:Syntax:
+    ``echo m3m2m1m0 [m7m6m5m4] > vmid_masks``
+
+    Where mN represents a byte mask value for VMID comparator N.
+    Second value not required on systems that have fewer than 4
+    VMID comparators.
+
+----
+
+:File:            ``numvmidc`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of VMID comparators
+
+----
+
+:File:            ``res_idx`` (rw)
+:Trace Registers: None.
+:Notes:
+    Select the resource selector control to access. Must be 2 or
+    higher as selectors 0 and 1 are hardwired.
+
+:Syntax:
+    ``echo idx > res_idx``
+
+    Where 2 <= idx < nr_resource x 2
+
+----
+
+:File:            ``res_ctrl`` (rw)
+:Trace Registers: RSCTLR[idx]
+:Notes:
+    Set resource selector control value. Value per ETMv4 spec.
+
+:Depends: ``res_idx``
+:Syntax:
+    ``echo val > res_cntr``
+
+    Where val is per ETMv4 spec.
+
+----
+
+:File:            ``nr_resource`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of resource selector pairs
+
+----
+
+:File:            ``event`` (rw)
+:Trace Registers: EVENTCTRL0R
+:Notes:
+    Set up to 4 implemented event fields.
+
+:Syntax:
+    ``echo ev3ev2ev1ev0 > event``
+
+    Where evN is an 8 bit event field. Up to 4 event fields make up the
+    32-bit input value. Number of valid fields is implementation dependent,
+    defined in IDR0.
+
+----
+
+:File: ``event_instren`` (rw)
+:Trace Registers: EVENTCTRL1R
+:Notes:
+    Choose events which insert event packets into trace stream.
+
+:Depends: EVENTCTRL0R
+:Syntax:
+    ``echo bitfield > event_instren``
+
+    Where bitfield is up to 4 bits according to number of event fields.
+
+----
+
+:File:            ``event_ts`` (rw)
+:Trace Registers: TSCTLR
+:Notes:
+    Set the event that will generate timestamp requests.
+
+:Depends: ``TS activated``
+:Syntax:
+    ``echo evfield > event_ts``
+
+    Where evfield is an 8 bit event selector.
+
+----
+
+:File:            ``seq_idx`` (rw)
+:Trace Registers: None
+:Notes:
+    Sequencer event register select - 0 to 2
+
+----
+
+:File:            ``seq_state`` (rw)
+:Trace Registers: SEQSTR
+:Notes:
+    Sequencer current state - 0 to 3.
+
+----
+
+:File:            ``seq_event`` (rw)
+:Trace Registers: SEQEVR[idx]
+:Notes:
+    State transition event registers
+
+:Depends: ``seq_idx``
+:Syntax:
+    ``echo evBevF > seq_event``
+
+    Where evBevF is a 16 bit value made up of two event selectors,
+
+    - evB : back
+    - evF : forwards.
+
+----
+
+:File:            ``seq_reset_event`` (rw)
+:Trace Registers: SEQRSTEVR
+:Notes:
+    Sequencer reset event
+
+:Syntax:
+    ``echo evfield > seq_reset_event``
+
+    Where evfield is an 8 bit event selector.
+
+----
+
+:File:            ``nrseqstate`` (ro)
+:Trace Registers: From IDR5
+:Notes:
+    Number of sequencer states (0 or 4)
+
+----
+
+:File:            ``nr_pe_cmp`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of PE comparator inputs
+
+----
+
+:File:            ``nr_ext_inp`` (ro)
+:Trace Registers: From IDR5
+:Notes:
+    Number of external inputs
+
+----
+
+:File:            ``nr_ss_cmp`` (ro)
+:Trace Registers: From IDR4
+:Notes:
+    Number of Single Shot control registers
+
+----
+
+*Note:* When programming any address comparator the driver will tag the
+comparator with a type used - i.e. RANGE, SINGLE, START, STOP. Once this tag
+is set, then only the values can be changed using the same sysfs file / type
+used to program it.
+
+Thus::
+
+  % echo 0 > addr_idx		; select address comparator 0
+  % echo 0x1000 0x5000 0 > addr_range ; set address range on comparators 0, 1.
+  % echo 0x2000 > addr_start    ; error as comparator 0 is a range comparator
+  % echo 2 > addr_idx		; select address comparator 2
+  % echo 0x2000 > addr_start	; this is OK as comparator 2 is unused.
+  % echo 0x3000 > addr_stop	; error as comparator 2 set as start address.
+  % echo 2 > addr_idx		; select address comparator 3
+  % echo 0x3000 > addr_stop	; this is OK
+
+To remove programming on all the comparators (and all the other hardware) use
+the reset parameter::
+
+  % echo 1 > reset
+
+
+
+The ‘mode’ sysfs parameter.
+---------------------------
+
+This is a bitfield selection parameter that sets the overall trace mode for the
+ETM. The table below describes the bits, using the defines from the driver
+source file, along with a description of the feature these represent. Many
+features are optional and therefore dependent on implementation in the
+hardware.
+
+Bit assignments shown below:-
+
+----
+
+**bit (0):**
+    ETM_MODE_EXCLUDE
+
+**description:**
+    This is the default value for the include / exclude function when
+    setting address ranges. Set 1 for exclude range. When the mode
+    parameter is set this value is applied to the currently indexed
+    address range.
+
+
+**bit (4):**
+    ETM_MODE_BB
+
+**description:**
+    Set to enable branch broadcast if supported in hardware [IDR0].
+
+
+**bit (5):**
+    ETMv4_MODE_CYCACC
+
+**description:**
+    Set to enable cycle accurate trace if supported [IDR0].
+
+
+**bit (6):**
+    ETMv4_MODE_CTXID
+
+**description:**
+    Set to enable context ID tracing if supported in hardware [IDR2].
+
+
+**bit (7):**
+    ETM_MODE_VMID
+
+**description:**
+    Set to enable virtual machine ID tracing if supported [IDR2].
+
+
+**bit (11):**
+    ETMv4_MODE_TIMESTAMP
+
+**description:**
+    Set to enable timestamp generation if supported [IDR0].
+
+
+**bit (12):**
+    ETM_MODE_RETURNSTACK
+**description:**
+    Set to enable trace return stack use if supported [IDR0].
+
+
+**bit (13-14):**
+    ETM_MODE_QELEM(val)
+
+**description:**
+    ‘val’ determines level of Q element support enabled if
+    implemented by the ETM [IDR0]
+
+
+**bit (19):**
+    ETM_MODE_ATB_TRIGGER
+
+**description:**
+    Set to enable the ATBTRIGGER bit in the event control register
+    [EVENTCTLR1] if supported [IDR5].
+
+
+**bit (20):**
+    ETM_MODE_LPOVERRIDE
+
+**description:**
+    Set to enable the LPOVERRIDE bit in the event control register
+    [EVENTCTLR1], if supported [IDR5].
+
+
+**bit (21):**
+    ETM_MODE_ISTALL_EN
+
+**description:**
+    Set to enable the ISTALL bit in the stall control register
+    [STALLCTLR]
+
+
+**bit (23):**
+    ETM_MODE_INSTPRIO
+
+**description:**
+	      Set to enable the INSTPRIORITY bit in the stall control register
+	      [STALLCTLR] , if supported [IDR0].
+
+
+**bit (24):**
+    ETM_MODE_NOOVERFLOW
+
+**description:**
+    Set to enable the NOOVERFLOW bit in the stall control register
+    [STALLCTLR], if supported [IDR3].
+
+
+**bit (25):**
+    ETM_MODE_TRACE_RESET
+
+**description:**
+    Set to enable the TRCRESET bit in the viewinst control register
+    [VICTLR] , if supported [IDR3].
+
+
+**bit (26):**
+    ETM_MODE_TRACE_ERR
+
+**description:**
+    Set to enable the TRCCTRL bit in the viewinst control register
+    [VICTLR].
+
+
+**bit (27):**
+    ETM_MODE_VIEWINST_STARTSTOP
+
+**description:**
+    Set the initial state value of the ViewInst start / stop logic
+    in the viewinst control register [VICTLR]
+
+
+**bit (30):**
+    ETM_MODE_EXCL_KERN
+
+**description:**
+    Set default trace setup to exclude kernel mode trace (see note a)
+
+
+**bit (31):**
+    ETM_MODE_EXCL_USER
+
+**description:**
+    Set default trace setup to exclude user space trace (see note a)
+
+----
+
+*Note a)* On startup the ETM is programmed to trace the complete address space
+using address range comparator 0. ‘mode’ bits 30 / 31 modify this setting to
+set EL exclude bits for NS state in either user space (EL0) or kernel space
+(EL1) in the address range comparator. (the default setting excludes all
+secure EL, and NS EL2)
+
+Once the reset parameter has been used, and/or custom programming has been
+implemented - using these bits will result in the EL bits for address
+comparator 0 being set in the same way.
+
+*Note b)* Bits 2-3, 8-10, 15-16, 18, 22, control features that only work with
+data trace. As A-profile data trace is architecturally prohibited in ETMv4,
+these have been omitted here. Possible uses could be where a kernel has
+support for control of R or M profile infrastructure as part of a heterogeneous
+system.
+
+Bits 17, 28-29 are unused.
diff --git a/Documentation/trace/coresight.rst b/Documentation/trace/coresight/coresight.rst
similarity index 99%
rename from Documentation/trace/coresight.rst
rename to Documentation/trace/coresight/coresight.rst
index 72f4b7e..a566719 100644
--- a/Documentation/trace/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -489,7 +489,7 @@
     crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/stm0
     root@genericarmv8:~#
 
-Details on how to use the generic STM API can be found here [#second]_.
+Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
 
 .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
 
diff --git a/Documentation/trace/coresight/index.rst b/Documentation/trace/coresight/index.rst
new file mode 100644
index 0000000..8d31b15
--- /dev/null
+++ b/Documentation/trace/coresight/index.rst
@@ -0,0 +1,9 @@
+==============================
+CoreSight - ARM Hardware Trace
+==============================
+
+.. toctree::
+   :maxdepth: 2
+   :glob:
+
+   *
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index b7891cb..04acd27 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -23,5 +23,4 @@
    intel_th
    stm
    sys-t
-   coresight
-   coresight-cpu-debug
+   coresight/index
diff --git a/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
index 118fb41..f3c8e8d 100644
--- a/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
+++ b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
@@ -455,7 +455,7 @@
   `GnuK`_ della FSIJ. Questo è uno dei pochi dispositivi a supportare le chiavi
   ECC ED25519, ma offre meno funzionalità di sicurezza (come la resistenza
   alla manomissione o alcuni attacchi ad un canale laterale).
-- `Nitrokey Pro`_: è simile alla Nitrokey Start, ma è più resistente alla
+- `Nitrokey Pro 2`_: è simile alla Nitrokey Start, ma è più resistente alla
   manomissione e offre più funzionalità di sicurezza. La Pro 2 supporta la
   crittografia ECC (NISTP).
 - `Yubikey 5`_: l'hardware e il software sono proprietari, ma è più economica
diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
index b3f51b1..ae3ad89 100644
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@@ -240,21 +240,21 @@
 서브시스템에 특화된 커널 브랜치들로 구성된다. 몇몇 다른 메인
 브랜치들은 다음과 같다.
 
-  - main 4.x 커널 트리
-  - 4.x.y - 안정된 커널 트리
-  - 서브시스템을 위한 커널 트리들과 패치들
-  - 4.x - 통합 테스트를 위한 next 커널 트리
+  - 리누스의 메인라인 트리
+  - 여러 메이저 넘버를 갖는 다양한 안정된 커널 트리들
+  - 서브시스템을 위한 커널 트리들
+  - 통합 테스트를 위한 linux-next 커널 트리
 
-4.x 커널 트리
+메인라인 트리
 ~~~~~~~~~~~~~
 
-4.x 커널들은 Linus Torvalds가 관리하며 https://kernel.org 의
-pub/linux/kernel/v4.x/ 디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다.
+메인라인 트리는 Linus Torvalds가 관리하며 https://kernel.org  또는 소스
+저장소에서 참조될 수 있다.개발 프로세스는 다음과 같다.
 
   - 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은
     메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
-    몇 주 동안 -next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
-    선호되는 방법은  git(커널의 소스 관리 툴, 더 많은 정보들은
+    몇 주 동안 linux-next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는
+    데 선호되는 방법은  git(커널의 소스 관리 툴, 더 많은 정보들은
     https://git-scm.com/ 에서 참조할 수 있다)를 사용하는 것이지만 순수한
     패치파일의 형식으로 보내는 것도 무관하다.
   - 2주 후에 -rc1 커널이 릴리즈되며 여기서부터의 주안점은 새로운 커널을
@@ -281,28 +281,25 @@
         버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라
         배포되는 것은 아니기 때문이다."*
 
-4.x.y - 안정 커널 트리
-~~~~~~~~~~~~~~~~~~~~~~
+여러 메이저 넘버를 갖는 다양한 안정된 커널 트리들
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-3 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 4.x
-커널에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한 수정들을
-포함한다.
+3 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 해당 메이저
+메인라인 릴리즈에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한
+수정들을 포함하며, 앞의 두 버전 넘버는 같은 기반 버전을 의미한다.
 
 이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며,
 개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다.
 
-어떤 4.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 4.x
-커널이 현재의 안정 커널이다.
-
-4.x.y는 "stable" 팀<stable@vger.kernel.org>에 의해 관리되며 거의 매번 격주로
-배포된다.
+-stable 트리들은 "stable" 팀<stable@vger.kernel.org>에 의해 관리되며 거의 매번
+격주로 배포된다.
 
 커널 트리 문서들 내의 :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
 파일은 어떤 종류의 변경들이 -stable 트리로 들어왔는지와
 배포 프로세스가 어떻게 진행되는지를 설명한다.
 
-서브시스템 커널 트리들과 패치들
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+서브시스템 커널 트리들
+~~~~~~~~~~~~~~~~~~~~~~
 
 다양한 커널 서브시스템의 메인테이너들 --- 그리고 많은 커널 서브시스템 개발자들
 --- 은 그들의 현재 개발 상태를 소스 저장소로 노출한다. 이를 통해 다른 사람들도
@@ -324,17 +321,18 @@
 대부분의 이러한 patchwork 사이트는 https://patchwork.kernel.org/ 또는
 http://patchwork.ozlabs.org/ 에 나열되어 있다.
 
-4.x - 통합 테스트를 위한 next 커널 트리
----------------------------------------
-서브시스템 트리들의 변경사항들은 mainline 4.x 트리로 들어오기 전에 통합
-테스트를 거쳐야 한다. 이런 목적으로, 모든 서브시스템 트리의 변경사항을 거의
-매일 받아가는 특수한 테스트 저장소가 존재한다:
+통합 테스트를 위한 linux-next 커널 트리
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+서브시스템 트리들의 변경사항들은 mainline 트리로 들어오기 전에 통합 테스트를
+거쳐야 한다. 이런 목적으로, 모든 서브시스템 트리의 변경사항을 거의 매일
+받아가는 특수한 테스트 저장소가 존재한다:
 
        https://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
 
-이런 식으로, -next 커널을 통해 다음 머지 기간에 메인라인 커널에 어떤 변경이
-가해질 것인지 간략히 알 수 있다. 모험심 강한 테스터라면 -next 커널에서 테스트를
-수행하는 것도 좋을 것이다.
+이런 식으로, linux-next 커널을 통해 다음 머지 기간에 메인라인 커널에 어떤
+변경이 가해질 것인지 간략히 알 수 있다. 모험심 강한 테스터라면 linux-next
+커널에서 테스트를 수행하는 것도 좋을 것이다.
 
 
 버그 보고
diff --git a/Documentation/translations/ko_KR/index.rst b/Documentation/translations/ko_KR/index.rst
index 0b69534..27995c4 100644
--- a/Documentation/translations/ko_KR/index.rst
+++ b/Documentation/translations/ko_KR/index.rst
@@ -3,8 +3,8 @@
         \renewcommand\thesection*
         \renewcommand\thesubsection*
 
-Korean translations
-===================
+한국어 번역
+===========
 
 .. toctree::
    :maxdepth: 1
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index 2774624..f07c40a 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -1907,21 +1907,6 @@
      위해선 Documentation/DMA-API.txt 문서를 참고하세요.
 
 
-MMIO 쓰기 배리어
-----------------
-
-리눅스 커널은 또한 memory-mapped I/O 쓰기를 위한 특별한 배리어도 가지고
-있습니다:
-
-	mmiowb();
-
-이것은 mandatory 쓰기 배리어의 변종으로, 완화된 순서 규칙의 I/O 영역에으로의
-쓰기가 부분적으로 순서를 맞추도록 해줍니다.  이 함수는 CPU->하드웨어 사이를
-넘어서 실제 하드웨어에까지 일부 수준의 영향을 끼칩니다.
-
-더 많은 정보를 위해선 "Acquire vs I/O 액세스" 서브섹션을 참고하세요.
-
-
 =========================
 암묵적 커널 메모리 배리어
 =========================
@@ -2283,73 +2268,6 @@
 	*E, *F or *G following RELEASE Q
 
 
-
-ACQUIRE VS I/O 액세스
-----------------------
-
-특정한 (특히 NUMA 가 관련된) 환경 하에서 두개의 CPU 에서 동일한 스핀락으로
-보호되는 두개의 크리티컬 섹션 안의 I/O 액세스는 PCI 브릿지에 겹쳐진 I/O
-액세스로 보일 수 있는데, PCI 브릿지는 캐시 일관성 프로토콜과 합을 맞춰야 할
-의무가 없으므로, 필요한 읽기 메모리 배리어가 요청되지 않기 때문입니다.
-
-예를 들어서:
-
-	CPU 1				CPU 2
-	===============================	===============================
-	spin_lock(Q)
-	writel(0, ADDR)
-	writel(1, DATA);
-	spin_unlock(Q);
-					spin_lock(Q);
-					writel(4, ADDR);
-					writel(5, DATA);
-					spin_unlock(Q);
-
-는 PCI 브릿지에 다음과 같이 보일 수 있습니다:
-
-	STORE *ADDR = 0, STORE *ADDR = 4, STORE *DATA = 1, STORE *DATA = 5
-
-이렇게 되면 하드웨어의 오동작을 일으킬 수 있습니다.
-
-
-이런 경우엔 잡아둔 스핀락을 내려놓기 전에 mmiowb() 를 수행해야 하는데, 예를
-들면 다음과 같습니다:
-
-	CPU 1				CPU 2
-	===============================	===============================
-	spin_lock(Q)
-	writel(0, ADDR)
-	writel(1, DATA);
-	mmiowb();
-	spin_unlock(Q);
-					spin_lock(Q);
-					writel(4, ADDR);
-					writel(5, DATA);
-					mmiowb();
-					spin_unlock(Q);
-
-이 코드는 CPU 1 에서 요청된 두개의 스토어가 PCI 브릿지에 CPU 2 에서 요청된
-스토어들보다 먼저 보여짐을 보장합니다.
-
-
-또한, 같은 디바이스에서 스토어를 이어 로드가 수행되면 이 로드는 로드가 수행되기
-전에 스토어가 완료되기를 강제하므로 mmiowb() 의 필요가 없어집니다:
-
-	CPU 1				CPU 2
-	===============================	===============================
-	spin_lock(Q)
-	writel(0, ADDR)
-	a = readl(DATA);
-	spin_unlock(Q);
-					spin_lock(Q);
-					writel(4, ADDR);
-					b = readl(DATA);
-					spin_unlock(Q);
-
-
-더 많은 정보를 위해선 Documentation/driver-api/device-io.rst 를 참고하세요.
-
-
 =========================
 메모리 배리어가 필요한 곳
 =========================
@@ -2494,14 +2412,9 @@
 리눅스 커널 내부에서, I/O 는 어떻게 액세스들을 적절히 순차적이게 만들 수 있는지
 알고 있는, - inb() 나 writel() 과 같은 - 적절한 액세스 루틴을 통해 이루어져야만
 합니다.  이것들은 대부분의 경우에는 명시적 메모리 배리어 와 함께 사용될 필요가
-없습니다만, 다음의 두가지 상황에서는 명시적 메모리 배리어가 필요할 수 있습니다:
-
- (1) 일부 시스템에서 I/O 스토어는 모든 CPU 에 일관되게 순서 맞춰지지 않는데,
-     따라서 _모든_ 일반적인 드라이버들에 락이 사용되어야만 하고 이 크리티컬
-     섹션을 빠져나오기 전에 mmiowb() 가 꼭 호출되어야 합니다.
-
- (2) 만약 액세스 함수들이 완화된 메모리 액세스 속성을 갖는 I/O 메모리 윈도우를
-     사용한다면, 순서를 강제하기 위해선 _mandatory_ 메모리 배리어가 필요합니다.
+없습니다만, 완화된 메모리 액세스 속성으로 I/O 메모리 윈도우로의 참조를 위해
+액세스 함수가 사용된다면 순서를 강제하기 위해 _madatory_ 메모리 배리어가
+필요합니다.
 
 더 많은 정보를 위해선 Documentation/driver-api/device-io.rst 를 참고하십시오.
 
@@ -2545,10 +2458,9 @@
 인터럽트 내에서 일어난 액세스와 섞일 수 있다고 - 그리고 그 반대도 - 가정해야만
 합니다.
 
-그런 영역 안에서 일어나는 I/O 액세스들은 엄격한 순서 규칙의 I/O 레지스터에
-묵시적 I/O 배리어를 형성하는 동기적 (synchronous) 로드 오퍼레이션을 포함하기
-때문에 일반적으로는 이런게 문제가 되지 않습니다.  만약 이걸로는 충분치 않다면
-mmiowb() 가 명시적으로 사용될 필요가 있습니다.
+그런 영역 안에서 일어나는 I/O 액세스는 묵시적 I/O 배리어를 형성하는, 엄격한
+순서 규칙의 I/O 레지스터로의 로드 오퍼레이션을 포함하기 때문에 일반적으로는
+문제가 되지 않습니다.
 
 
 하나의 인터럽트 루틴과 별도의 CPU 에서 수행중이며 서로 통신을 하는 두 루틴
@@ -2560,67 +2472,102 @@
 커널 I/O 배리어의 효과
 ======================
 
-I/O 메모리에 액세스할 때, 드라이버는 적절한 액세스 함수를 사용해야 합니다:
-
- (*) inX(), outX():
-
-     이것들은 메모리 공간보다는 I/O 공간에 이야기를 하려는 의도로
-     만들어졌습니다만, 그건 기본적으로 CPU 마다 다른 컨셉입니다.  i386 과
-     x86_64 프로세서들은 특별한 I/O 공간 액세스 사이클과 명령어를 실제로 가지고
-     있지만, 다른 많은 CPU 들에는 그런 컨셉이 존재하지 않습니다.
-
-     다른 것들 중에서도 PCI 버스가 I/O 공간 컨셉을 정의하는데, 이는 - i386 과
-     x86_64 같은 CPU 에서 - CPU 의 I/O 공간 컨셉으로 쉽게 매치됩니다.  하지만,
-     대체할 I/O 공간이 없는 CPU 에서는 CPU 의 메모리 맵의 가상 I/O 공간으로
-     매핑될 수도 있습니다.
-
-     이 공간으로의 액세스는 (i386 등에서는) 완전하게 동기화 됩니다만, 중간의
-     (PCI 호스트 브리지와 같은) 브리지들은 이를 완전히 보장하진 않을수도
-     있습니다.
-
-     이것들의 상호간의 순서는 완전하게 보장됩니다.
-
-     다른 타입의 메모리 오퍼레이션, I/O 오퍼레이션에 대한 순서는 완전하게
-     보장되지는 않습니다.
+I/O 액세스를 통한 주변장치와의 통신은 아키텍쳐와 기기에 매우 종속적입니다.
+따라서, 본질적으로 이식성이 없는 드라이버는 가능한 가장 적은 오버헤드로
+동기화를 하기 위해 각자의 타겟 시스템의 특정 동작에 의존할 겁니다.  다양한
+아키텍쳐와 버스 구현에 이식성을 가지려 하는 드라이버를 위해, 커널은 다양한
+정도의 순서 보장을 제공하는 일련의 액세스 함수를 제공합니다.
 
  (*) readX(), writeX():
 
-     이것들이 수행 요청되는 CPU 에서 서로에게 완전히 순서가 맞춰지고 독립적으로
-     수행되는지에 대한 보장 여부는 이들이 액세스 하는 메모리 윈도우에 정의된
-     특성에 의해 결정됩니다.  예를 들어, 최신의 i386 아키텍쳐 머신에서는 MTRR
-     레지스터로 이 특성이 조정됩니다.
+	readX() 와 writeX() MMIO 액세스 함수는 접근되는 주변장치로의 포인터를
+	__iomem * 패러미터로 받습니다.  디폴트 I/O 기능으로 매핑되는 포인터
+	(예: ioremap() 으로 반환되는 것) 의 순서 보장은 다음과 같습니다:
 
-     일반적으로는, 프리페치 (prefetch) 가능한 디바이스를 액세스 하는게
-     아니라면, 이것들은 완전히 순서가 맞춰지고 결합되지 않게 보장될 겁니다.
+	1. 같은 주변장치로의 모든 readX() 와 writeX() 액세스는 각자에 대해
+	   순서지어집니다.  이는 같은 CPU 쓰레드에 의한 특정 디바이스로의 MMIO
+	   레지스터 액세스가 프로그램 순서대로 도착할 것을 보장합니다.
 
-     하지만, (PCI 브리지와 같은) 중간의 하드웨어는 자신이 원한다면 집행을
-     연기시킬 수 있습니다; 스토어 명령을 실제로 하드웨어로 내려보내기(flush)
-     위해서는 같은 위치로부터 로드를 하는 방법이 있습니다만[*], PCI 의 경우는
-     같은 디바이스나 환경 구성 영역에서의 로드만으로도 충분할 겁니다.
+	2. 한 스핀락을 잡은 CPU 쓰레드에 의한 writeX() 는 같은 스핀락을 나중에
+	   잡은 다른 CPU 쓰레드에 의해 같은 주변장치를 향해 호출된 writeX()
+	   앞으로 순서지어집니다.  이는 스핀락을 잡은 채 특정 디바이스를 향해
+	   호출된 MMIO 레지스터 쓰기는 해당 락의 획득에 일관적인 순서로 도달할
+	   것을 보장합니다.
 
-     [*] 주의! 쓰여진 것과 같은 위치로부터의 로드를 시도하는 것은 오동작을
-	 일으킬 수도 있습니다 - 예로 16650 Rx/Tx 시리얼 레지스터를 생각해
-	 보세요.
+	3. 특정 주변장치를 향한 특정 CPU 쓰레드의 writeX() 는 먼저 해당
+	   쓰레드로 전파되는, 또는 해당 쓰레드에 의해 요청된 모든 앞선 메모리
+	   쓰기가 완료되기 전까지 먼저 기다립니다.  이는 dma_alloc_coherent()
+	   를 통해 할당된 전송용 DMA 버퍼로의 해당 CPU 의 쓰기가 이 CPU 가 이
+	   전송을 시작시키기 위해 MMIO 컨트롤 레지스터에 쓰기를 할 때 DMA
+	   엔진에 보여질 것을 보장합니다.
 
-     프리페치 가능한 I/O 메모리가 사용되면, 스토어 명령들이 순서를 지키도록
-     하기 위해 mmiowb() 배리어가 필요할 수 있습니다.
+	4. 특정 CPU 쓰레드에 의한 주변장치로의 readX() 는 같은 쓰레드에 의한
+	   모든 뒤따르는 메모리 읽기가 시작되기 전에 완료됩니다.  이는
+	   dma_alloc_coherent() 를 통해 할당된 수신용 DMA 버퍼로부터의 CPU 의
+	   읽기는 이 DMA 수신의 완료를 표시하는 DMA 엔진의 MMIO 상태 레지스터
+	   읽기 후에는 오염된 데이터를 읽지 않을 것을 보장합니다.
 
-     PCI 트랜잭션 사이의 상호작용에 대해 더 많은 정보를 위해선 PCI 명세서를
-     참고하시기 바랍니다.
+	5. CPU 에 의한 주변장치로의 readX() 는 모든 뒤따르는 delay() 루프가
+	   수행을 시작하기 전에 완료됩니다.  이는 CPU 의 특정
+	   주변장치로의 두개의 MMIO 레지스터 쓰기가 행해지는데 첫번째 쓰기가
+	   readX() 를 통해 곧바로 읽어졌고 이어 두번째 writeX() 전에 udelay(1)
+	   이 호출되었다면 이 두개의 쓰기는 최소 1us 의 간격을 두고 행해질 것을
+	   보장합니다:
+
+		writel(42, DEVICE_REGISTER_0); // 디바이스에 도착함...
+		readl(DEVICE_REGISTER_0);
+		udelay(1);
+		writel(42, DEVICE_REGISTER_1); // ...이것보다 최소 1us 전에.
+
+	디폴트가 아닌 기능을 통해 얻어지는 __iomem 포인터 (예: ioremap_wc() 를
+	통해 리턴되는 것) 의 순서 속성은 실제 아키텍쳐에 의존적이어서 이런
+	종류의 매핑으로의 액세스는 앞서 설명된 보장사항에 의존할 수 없습니다.
 
  (*) readX_relaxed(), writeX_relaxed()
 
-     이것들은 readX() 와 writeX() 랑 비슷하지만, 더 완화된 메모리 순서 보장을
-     제공합니다.  구체적으로, 이것들은 일반적 메모리 액세스 (예: DMA 버퍼) 에도
-     LOCK 이나 UNLOCK 오퍼레이션들에도 순서를 보장하지 않습니다.  LOCK 이나
-     UNLOCK 오퍼레이션들에 맞춰지는 순서가 필요하다면, mmiowb() 배리어가 사용될
-     수 있습니다.  같은 주변 장치에의 완화된 액세스끼리는 순서가 지켜짐을 알아
-     두시기 바랍니다.
+	이것들은 readX() 와 writeX() 랑 비슷하지만, 더 완화된 메모리 순서
+	보장을 제공합니다.  구체적으로, 이것들은 일반적 메모리 액세스나 delay()
+	루프 (예:앞의 2-5 항목) 에 대해 순서를 보장하지 않습니다만 디폴트 I/O
+	기능으로 매핑된 __iomem 포인터에 대해 동작할 때, 같은 CPU 쓰레드에 의해
+	같은 주변장치로의 액세스에는 순서가 맞춰질 것이 보장됩니다.
+
+ (*) readsX(), writesX():
+
+	readsX() 와 writesX() MMIO 액세스 함수는 DMA 를 수행하는데 적절치 않은,
+	주변장치 내의 메모리 매핑된 레지스터 기반 FIFO 로의 액세스를 위해
+	설계되었습니다.  따라서, 이 기능들은 앞서 설명된 readX_relaxed() 와
+	writeX_relaxed() 의 순서 보장만을 제공합니다.
+
+ (*) inX(), outX():
+
+	inX() 와 outX() 액세스 함수는 일부 아키텍쳐 (특히 x86) 에서는 특수한
+	명령어를 필요로 하며 포트에 매핑되는, 과거의 유산인 I/O 주변장치로의
+	접근을 위해 만들어졌습니다.
+
+	많은 CPU 아키텍쳐가 결국은 이런 주변장치를 내부의 가상 메모리 매핑을
+	통해 접근하기 때문에, inX() 와 outX() 가 제공하는 이식성 있는 순서
+	보장은 디폴트 I/O 기능을 통한 매핑을 접근할 때의 readX() 와 writeX() 에
+	의해 제공되는 것과 각각 동일합니다.
+
+	디바이스 드라이버는 outX() 가 리턴하기 전에 해당 I/O 주변장치로부터의
+	완료 응답을 기다리는 쓰기 트랜잭션을 만들어 낸다고 기대할 수도
+	있습니다.  이는 모든 아키텍쳐에서 보장되지는 않고, 따라서 이식성 있는
+	순서 규칙의 일부분이 아닙니다.
+
+ (*) insX(), outsX():
+
+	앞에서와 같이, insX() 와 outsX() 액세스 함수는 디폴트 I/O 기능을 통한
+	매핑을 접근할 때 각각 readX() 와 writeX() 와 같은 순서 보장을
+	제공합니다.
 
  (*) ioreadX(), iowriteX()
 
-     이것들은 inX()/outX() 나 readX()/writeX() 처럼 실제로 수행하는 액세스의
-     종류에 따라 적절하게 수행될 것입니다.
+	이것들은 inX()/outX() 나 readX()/writeX() 처럼 실제로 수행하는 액세스의
+	종류에 따라 적절하게 수행될 것입니다.
+
+String 액세스 함수 (insX(), outsX(), readsX() 그리고 writesX()) 의 예외를
+제외하고는, 앞의 모든 것이 아랫단의 주변장치가 little-endian 이라 가정하며,
+따라서 big-endian 아키텍쳐에서는 byte-swapping 오퍼레이션을 수행합니다.
 
 
 ===================================
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index ad494da..e983488 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -21,6 +21,7 @@
    unshare
    spec_ctrl
    accelerators/ocxl
+   ioctl/index
 
 .. only::  subproject and html
 
diff --git a/Documentation/ioctl/cdrom.rst b/Documentation/userspace-api/ioctl/cdrom.rst
similarity index 100%
rename from Documentation/ioctl/cdrom.rst
rename to Documentation/userspace-api/ioctl/cdrom.rst
diff --git a/Documentation/ioctl/hdio.rst b/Documentation/userspace-api/ioctl/hdio.rst
similarity index 100%
rename from Documentation/ioctl/hdio.rst
rename to Documentation/userspace-api/ioctl/hdio.rst
diff --git a/Documentation/ioctl/index.rst b/Documentation/userspace-api/ioctl/index.rst
similarity index 86%
rename from Documentation/ioctl/index.rst
rename to Documentation/userspace-api/ioctl/index.rst
index 0f0a857..475675e 100644
--- a/Documentation/ioctl/index.rst
+++ b/Documentation/userspace-api/ioctl/index.rst
@@ -9,7 +9,6 @@
 
    ioctl-number
 
-   botching-up-ioctls
    ioctl-decoding
 
    cdrom
diff --git a/Documentation/ioctl/ioctl-decoding.rst b/Documentation/userspace-api/ioctl/ioctl-decoding.rst
similarity index 100%
rename from Documentation/ioctl/ioctl-decoding.rst
rename to Documentation/userspace-api/ioctl/ioctl-decoding.rst
diff --git a/Documentation/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
similarity index 100%
rename from Documentation/ioctl/ioctl-number.rst
rename to Documentation/userspace-api/ioctl/ioctl-number.rst
diff --git a/Documentation/w1/index.rst b/Documentation/w1/index.rst
index 57cba81..156279f 100644
--- a/Documentation/w1/index.rst
+++ b/Documentation/w1/index.rst
@@ -1,4 +1,4 @@
-. SPDX-License-Identifier: GPL-2.0
+.. SPDX-License-Identifier: GPL-2.0
 
 ================
 1-Wire Subsystem
diff --git a/MAINTAINERS b/MAINTAINERS
index 775c480..f76e1db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1,12 +1,14 @@
-
-
-	List of maintainers and how to submit kernel changes
+List of maintainers and how to submit kernel changes
+====================================================
 
 Please try to follow the guidelines below.  This will make things
 easier on the maintainers.  Not all of these guidelines matter for every
 trivial patch so apply some common sense.
 
-1.	Always _test_ your changes, however small, on at least 4 or
+Tips for patch submitters
+-------------------------
+
+1.	Always *test* your changes, however small, on at least 4 or
 	5 people, preferably many more.
 
 2.	Try to release a few ALPHA test versions to the net. Announce
@@ -25,7 +27,7 @@
 	testing and await feedback.
 
 5.	Make a patch available to the relevant maintainer in the list. Use
-	'diff -u' to make the patch easy to merge. Be prepared to get your
+	``diff -u`` to make the patch easy to merge. Be prepared to get your
 	changes sent back with seemingly silly requests about formatting
 	and variable names.  These aren't as silly as they seem. One
 	job the maintainers (and especially Linus) do is to keep things
@@ -38,7 +40,7 @@
 	See Documentation/process/coding-style.rst for guidance here.
 
 	PLEASE CC: the maintainers and mailing lists that are generated
-	by scripts/get_maintainer.pl.  The results returned by the
+	by ``scripts/get_maintainer.pl.`` The results returned by the
 	script will be best if you have git installed and are making
 	your changes in a branch derived from Linus' latest git tree.
 	See Documentation/process/submitting-patches.rst for details.
@@ -70,26 +72,27 @@
 	not represent an immediate threat and are better handled publicly,
 	and ideally, should come with a patch proposal. Please do not send
 	automated reports to this list either. Such bugs will be handled
-	better and faster in the usual public places.
+	better and faster in the usual public places. See
+	Documentation/admin-guide/security-bugs.rst for details.
 
 8.	Happy hacking.
 
-Descriptions of section entries:
+Descriptions of section entries
+-------------------------------
 
-	P: Person (obsolete)
-	M: Mail patches to: FullName <address@domain>
-	R: Designated reviewer: FullName <address@domain>
+	M: *Mail* patches to: FullName <address@domain>
+	R: Designated *Reviewer*: FullName <address@domain>
 	   These reviewers should be CCed on patches.
-	L: Mailing list that is relevant to this area
-	W: Web-page with status/info
-	B: URI for where to file bugs. A web-page with detailed bug
+	L: *Mailing list* that is relevant to this area
+	W: *Web-page* with status/info
+	B: URI for where to file *bugs*. A web-page with detailed bug
 	   filing info, a direct bug tracker link, or a mailto: URI.
-	C: URI for chat protocol, server and channel where developers
+	C: URI for *chat* protocol, server and channel where developers
 	   usually hang out, for example irc://server/channel.
-	Q: Patchwork web based patch tracking system site
-	T: SCM tree type and location.
+	Q: *Patchwork* web based patch tracking system site
+	T: *SCM* tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
-	S: Status, one of the following:
+	S: *Status*, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
 	   Odd Fixes:	It has a maintainer but they don't have time to do
@@ -99,13 +102,17 @@
 	   Obsolete:	Old code. Something tagged obsolete generally means
 			it has been replaced by a better system and you
 			should be using that.
-	F: Files and directories with wildcard patterns.
+	P: Subsystem Profile document for more details submitting
+	   patches to the given subsystem. This is either an in-tree file,
+	   or a URI. See Documentation/maintainer/maintainer-entry-profile.rst
+	   for details.
+	F: *Files* and directories wildcard patterns.
 	   A trailing slash includes all files and subdirectory files.
 	   F:	drivers/net/	all files in and below drivers/net
 	   F:	drivers/net/*	all files in drivers/net, but not below
 	   F:	*/net/*		all files in "any top level directory"/net
 	   One pattern per line.  Multiple F: lines acceptable.
-	N: Files and directories with regex patterns.
+	N: Files and directories *Regex* patterns.
 	   N:	[^a-z]tegra	all files whose path contains the word tegra
 	   One pattern per line.  Multiple N: lines acceptable.
 	   scripts/get_maintainer.pl has different behavior for files that
@@ -113,14 +120,14 @@
 	   get_maintainer will not look at git log history when an F: pattern
 	   match occurs.  When an N: match occurs, git log history is used
 	   to also notify the people that have git commit signatures.
-	X: Files and directories that are NOT maintained, same rules as F:
-	   Files exclusions are tested before file matches.
+	X: *Excluded* files and directories that are NOT maintained, same
+	   rules as F:. Files exclusions are tested before file matches.
 	   Can be useful for excluding a specific subdirectory, for instance:
 	   F:	net/
 	   X:	net/ipv6/
 	   matches all files in and below net excluding net/ipv6/
-	K: Keyword perl extended regex pattern to match content in a
-	   patch or file.  For instance:
+	K: *Content regex* (perl extended) pattern match in a patch or file.
+	   For instance:
 	   K: of_get_profile
 	      matches patches or files that contain "of_get_profile"
 	   K: \b(printk|pr_(info|err))\b
@@ -128,13 +135,12 @@
 	      printk, pr_info or pr_err
 	   One regex pattern per line.  Multiple K: lines acceptable.
 
-Note: For the hard of thinking, this list is meant to remain in alphabetical
-order. If you could add yourselves to it in alphabetical order that would be
-so much easier [Ed]
+Maintainers List
+----------------
 
-Maintainers List (try to look for most precise areas first)
-
-		-----------------------------------
+.. note:: When reading this list, please look for the most precise areas
+          first. When adding to this list, please keep the entries in
+          alphabetical order.
 
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@kernel.org>
@@ -817,7 +823,7 @@
 F:	drivers/usb/gadget/udc/amd5536udc.*
 
 AMD GEODE PROCESSOR/CHIPSET SUPPORT
-P:	Andres Salomon <dilinger@queued.net>
+M:	Andres Salomon <dilinger@queued.net>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
@@ -1640,8 +1646,7 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/hwtracing/coresight/*
-F:	Documentation/trace/coresight.rst
-F:	Documentation/trace/coresight-cpu-debug.rst
+F:	Documentation/trace/coresight/*
 F:	Documentation/devicetree/bindings/arm/coresight.txt
 F:	Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
 F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*
@@ -3709,7 +3714,7 @@
 R:	Pengutronix Kernel Team <kernel@pengutronix.de>
 L:	linux-can@vger.kernel.org
 S:	Maintained
-F:	Documentation/networking/j1939.txt
+F:	Documentation/networking/j1939.rst
 F:	net/can/j1939/
 F:	include/uapi/linux/can/j1939.h
 
@@ -9401,6 +9406,7 @@
 M:	Vishal Verma <vishal.l.verma@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/blk.c
@@ -9411,6 +9417,7 @@
 M:	Dan Williams <dan.j.williams@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/btt*
@@ -9420,6 +9427,7 @@
 M:	Vishal Verma <vishal.l.verma@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/pmem*
@@ -9438,6 +9446,7 @@
 M:	Dave Jiang <dave.jiang@intel.com>
 M:	Ira Weiny <ira.weiny@intel.com>
 L:	linux-nvdimm@lists.01.org
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git
 S:	Supported
@@ -10337,7 +10346,6 @@
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
-P:	LinuxTV.org Project
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
@@ -13772,7 +13780,6 @@
 F:	arch/mips/ralink
 
 RALINK RT2X00 WIRELESS LAN DRIVER
-P:	rt2x00 project
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
 M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
@@ -14108,7 +14115,6 @@
 F:	drivers/net/ethernet/rocker/
 
 ROCKETPORT DRIVER
-P:	Comtrol Corp.
 W:	http://www.comtrol.com
 S:	Maintained
 F:	Documentation/driver-api/serial/rocket.rst
@@ -15016,15 +15022,13 @@
 F:	include/linux/platform_data/simplefb.h
 
 SIMTEC EB110ATX (Chalice CATS)
-P:	Ben Dooks
-P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Vincent Sanders <vince@simtec.co.uk>
 M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
-P:	Ben Dooks
-P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Vincent Sanders <vince@simtec.co.uk>
 M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
@@ -15739,7 +15743,7 @@
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
+F:	Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
 F:	drivers/input/keyboard/sun4i-lradc-keys.c
 
 SUNDANCE NETWORK DRIVER
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index a6f2063..8ed8503 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1858,7 +1858,7 @@
 		}
 
 		/* Indicate that we support PAUSE frames (see comment in
-		 * Documentation/networking/phy.txt)
+		 * Documentation/networking/phy.rst)
 		 */
 		phy_support_asym_pause(phy);
 
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_if.h b/drivers/net/ethernet/pensando/ionic/ionic_if.h
index dbdb7c5..39317cd 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_if.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_if.h
@@ -596,8 +596,8 @@
  *                      the @encap is set, the device will
  *                      offload the outer header checksums using
  *                      LCO (local checksum offload) (see
- *                      Documentation/networking/checksum-
- *                      offloads.txt for more info).
+ *                      Documentation/networking/checksum-offloads.rst
+ *                      for more info).
  *
  *                   IONIC_TXQ_DESC_OPCODE_CSUM_HW:
  *
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1041d80d..27d5b40 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -258,7 +258,7 @@
 	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
 	 supporting application to communicate with the BIOS regarding the new
 	 image for the image update to take effect.
-	 See <file:Documentation/driver-api/dell_rbu.rst> for more details on the driver.
+	 See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver.
 
 
 config FUJITSU_LAPTOP
diff --git a/drivers/platform/x86/dell_rbu.c b/drivers/platform/x86/dell_rbu.c
index 3691391..7d54533 100644
--- a/drivers/platform/x86/dell_rbu.c
+++ b/drivers/platform/x86/dell_rbu.c
@@ -24,7 +24,7 @@
  * on every time the packet data is written. This driver requires an
  * application to break the BIOS image in to fixed sized packet chunks.
  *
- * See Documentation/driver-api/dell_rbu.rst for more info.
+ * See Documentation/admin-guide/dell_rbu.rst for more info.
  */
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 5d3e63a..1d1051d 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1551,7 +1551,7 @@
 	/*
 	 * Consider in future setting limit!=0 maybe to min(num_of_cores - 1, 3)
 	 * so that we don't launch too many worker threads but
-	 * Documentation/workqueue.txt recommends setting it to 0
+	 * Documentation/core-api/workqueue.rst recommends setting it to 0
 	 */
 
 	/* WQ_UNBOUND allows decrypt tasks to run on any CPU */
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 89fc59d..ba873ec 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -140,6 +140,19 @@
 		     irq_handler_t thread_fn,
 		     unsigned long flags, const char *name, void *dev);
 
+/**
+ * request_irq - Add a handler for an interrupt line
+ * @irq:	The interrupt line to allocate
+ * @handler:	Function to be called when the IRQ occurs.
+ *		Primary handler for threaded interrupts
+ *		If NULL, the default primary handler is installed
+ * @flags:	Handling flags
+ * @name:	Name of the device generating this interrupt
+ * @dev:	A cookie passed to the handler function
+ *
+ * This call allocates an interrupt and establishes a handler; see
+ * the documentation for request_threaded_irq() for details.
+ */
 static inline int __must_check
 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
 	    const char *name, void *dev)
diff --git a/lib/genalloc.c b/lib/genalloc.c
index 9fc3129..24d20ca 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -472,7 +472,7 @@
 EXPORT_SYMBOL(gen_pool_dma_zalloc_align);
 
 /**
- * gen_pool_free - free allocated special memory back to the pool
+ * gen_pool_free_owner - free allocated special memory back to the pool
  * @pool: pool to free to
  * @addr: starting address of memory to free back to pool
  * @size: size in bytes of memory to free
diff --git a/scripts/jobserver-exec b/scripts/jobserver-exec
new file mode 100755
index 0000000..0fdb31a
--- /dev/null
+++ b/scripts/jobserver-exec
@@ -0,0 +1,66 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: GPL-2.0+
+#
+# This determines how many parallel tasks "make" is expecting, as it is
+# not exposed via an special variables, reserves them all, runs a subprocess
+# with PARALLELISM environment variable set, and releases the jobs back again.
+#
+# https://www.gnu.org/software/make/manual/html_node/POSIX-Jobserver.html#POSIX-Jobserver
+from __future__ import print_function
+import os, sys, errno
+import subprocess
+
+# Extract and prepare jobserver file descriptors from envirnoment.
+claim = 0
+jobs = b""
+try:
+	# Fetch the make environment options.
+	flags = os.environ['MAKEFLAGS']
+
+	# Look for "--jobserver=R,W"
+	# Note that GNU Make has used --jobserver-fds and --jobserver-auth
+	# so this handles all of them.
+	opts = [x for x in flags.split(" ") if x.startswith("--jobserver")]
+
+	# Parse out R,W file descriptor numbers and set them nonblocking.
+	fds = opts[0].split("=", 1)[1]
+	reader, writer = [int(x) for x in fds.split(",", 1)]
+	# Open a private copy of reader to avoid setting nonblocking
+	# on an unexpecting process with the same reader fd.
+	reader = os.open("/proc/self/fd/%d" % (reader),
+			 os.O_RDONLY | os.O_NONBLOCK)
+
+	# Read out as many jobserver slots as possible.
+	while True:
+		try:
+			slot = os.read(reader, 8)
+			jobs += slot
+		except (OSError, IOError) as e:
+			if e.errno == errno.EWOULDBLOCK:
+				# Stop at the end of the jobserver queue.
+				break
+			# If something went wrong, give back the jobs.
+			if len(jobs):
+				os.write(writer, jobs)
+			raise e
+	# Add a bump for our caller's reserveration, since we're just going
+	# to sit here blocked on our child.
+	claim = len(jobs) + 1
+except (KeyError, IndexError, ValueError, OSError, IOError) as e:
+	# Any missing environment strings or bad fds should result in just
+	# not being parallel.
+	pass
+
+# We can only claim parallelism if there was a jobserver (i.e. a top-level
+# "-jN" argument) and there were no other failures. Otherwise leave out the
+# environment variable and let the child figure out what is best.
+if claim > 0:
+	os.environ['PARALLELISM'] = '%d' % (claim)
+
+rc = subprocess.call(sys.argv[1:])
+
+# Return all the reserved slots.
+if len(jobs):
+	os.write(writer, jobs)
+
+sys.exit(rc)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 81dc917..f2d73f0 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1062,7 +1062,7 @@
     my $x = shift;
     my $file = shift;
 
-    if ($x =~ /(struct|union)\s+(\w+)\s*\{(.*)\}(\s*(__packed|__aligned|__attribute__\s*\(\([a-z0-9,_\s\(\)]*\)\)))*/) {
+    if ($x =~ /(struct|union)\s+(\w+)\s*\{(.*)\}(\s*(__packed|__aligned|____cacheline_aligned_in_smp|__attribute__\s*\(\([a-z0-9,_\s\(\)]*\)\)))*/) {
 	my $decl_type = $1;
 	$declaration_name = $2;
 	my $members = $3;
@@ -1073,10 +1073,11 @@
 	# strip comments:
 	$members =~ s/\/\*.*?\*\///gos;
 	# strip attributes
-	$members =~ s/\s*__attribute__\s*\(\([a-z0-9,_\*\s\(\)]*\)\)//gi;
-	$members =~ s/\s*__aligned\s*\([^;]*\)//gos;
-	$members =~ s/\s*__packed\s*//gos;
-	$members =~ s/\s*CRYPTO_MINALIGN_ATTR//gos;
+	$members =~ s/\s*__attribute__\s*\(\([a-z0-9,_\*\s\(\)]*\)\)/ /gi;
+	$members =~ s/\s*__aligned\s*\([^;]*\)/ /gos;
+	$members =~ s/\s*__packed\s*/ /gos;
+	$members =~ s/\s*CRYPTO_MINALIGN_ATTR/ /gos;
+	$members =~ s/\s*____cacheline_aligned_in_smp/ /gos;
 	# replace DECLARE_BITMAP
 	$members =~ s/DECLARE_BITMAP\s*\(([^,)]+),\s*([^,)]+)\)/unsigned long $1\[BITS_TO_LONGS($2)\]/gos;
 	# replace DECLARE_HASHTABLE
@@ -1449,6 +1450,10 @@
 	      # handles unnamed variable parameters
 	      $param = "...";
 	    }
+	    elsif ($param =~ /\w\.\.\.$/) {
+	      # for named variable parameters of the form `x...`, remove the dots
+	      $param =~ s/\.\.\.$//;
+	    }
 	    if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
 		$parameterdescs{$param} = "variable arguments";
 	    }
@@ -1936,6 +1941,18 @@
 sub process_body($$) {
     my $file = shift;
 
+    # Until all named variable macro parameters are
+    # documented using the bare name (`x`) rather than with
+    # dots (`x...`), strip the dots:
+    if ($section =~ /\w\.\.\.$/) {
+	$section =~ s/\.\.\.$//;
+
+	if ($verbose) {
+	    print STDERR "${file}:$.: warning: Variable macro arguments should be documented without dots\n";
+	    ++$warnings;
+	}
+    }
+
     if (/$doc_sect/i) { # case insensitive for supported section names
 	$newsection = $1;
 	$newcontents = $2;
diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index 3b638c0..470ccfe 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -124,11 +124,13 @@
 
 sub check_missing_file($$$)
 {
-	my $file = shift;
+	my $files = shift;
 	my $package = shift;
 	my $is_optional = shift;
 
-	return if(-e $file);
+	for (@$files) {
+		return if(-e $_);
+	}
 
 	add_package($package, $is_optional);
 }
@@ -343,10 +345,11 @@
 	);
 
 	if ($pdf) {
-		check_missing_file("/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf",
+		check_missing_file(["/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf"],
 				   "fonts-dejavu", 2);
 
-		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
+		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
+				   "/usr/share/fonts/opentype/noto/NotoSerifCJK-Regular.ttc"],
 				   "fonts-noto-cjk", 2);
 	}
 
@@ -413,7 +416,7 @@
 	}
 
 	if ($pdf) {
-		check_missing_file("/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc",
+		check_missing_file(["/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc"],
 				   "google-noto-sans-cjk-ttc-fonts", 2);
 	}
 
@@ -498,7 +501,7 @@
 	$map{"latexmk"} = "texlive-collection-basic";
 
 	if ($pdf) {
-		check_missing_file("/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc",
+		check_missing_file(["/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc"],
 				   "google-noto-sans-cjk-ttc-fonts", 2);
 	}
 
@@ -517,6 +520,7 @@
 		"dot"			=> "graphviz",
 		"convert"		=> "imagemagick",
 		"xelatex"		=> "texlive-bin",
+		"latexmk"		=> "texlive-core",
 		"rsvg-convert"		=> "extra/librsvg",
 	);
 
@@ -528,7 +532,7 @@
 	check_pacman_missing(\@archlinux_tex_pkgs, 2) if ($pdf);
 
 	if ($pdf) {
-		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
+		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc"],
 				   "noto-fonts-cjk", 2);
 	}
 
@@ -549,11 +553,11 @@
 		"rsvg-convert"		=> "gnome-base/librsvg",
 	);
 
-	check_missing_file("/usr/share/fonts/dejavu/DejaVuSans.ttf",
+	check_missing_file(["/usr/share/fonts/dejavu/DejaVuSans.ttf"],
 			   "media-fonts/dejavu", 2) if ($pdf);
 
 	if ($pdf) {
-		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJKsc-Regular.otf",
+		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJKsc-Regular.otf"],
 				   "media-fonts/noto-cjk", 2);
 	}
 
@@ -645,6 +649,12 @@
 # Common dependencies
 #
 
+sub deactivate_help()
+{
+	printf "\tIf you want to exit the virtualenv, you can use:\n";
+	printf "\tdeactivate\n";
+}
+
 sub check_needs()
 {
 	# Check for needed programs/tools
@@ -686,6 +696,7 @@
 		if ($need_sphinx && scalar @activates > 0 && $activates[0] ge $min_activate) {
 			printf "\nNeed to activate a compatible Sphinx version on virtualenv with:\n";
 			printf "\t. $activates[0]\n";
+			deactivate_help();
 			exit (1);
 		} else {
 			my $rec_activate = "$virtenv_dir/bin/activate";
@@ -697,6 +708,7 @@
 			printf "\t$virtualenv $virtenv_dir\n";
 			printf "\t. $rec_activate\n";
 			printf "\tpip install -r $requirement_file\n";
+			deactivate_help();
 
 			$need++ if (!$rec_sphinx_upgrade);
 		}