blob: c3be1b6000072b329482fdba3eaec0b325f886cd [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2020 SiFive, Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
maintainers:
- Sagar Kadam <sagar.kadam@sifive.com>
- Paul Walmsley <paul.walmsley@sifive.com>
description:
On the FU540 family of SoCs, most system-wide clock and reset integration
is via the PRCI IP block.
The clock consumer should specify the desired clock via the clock ID
macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
These macros begin with PRCI_CLK_.
The hfclk and rtcclk nodes are required, and represent physical
crystals or resonators located on the PCB. These nodes should be present
underneath /, rather than /soc.
properties:
compatible:
const: sifive,fu540-c000-prci
reg:
maxItems: 1
clocks:
items:
- description: high frequency clock.
- description: RTL clock.
clock-names:
items:
- const: hfclk
- const: rtcclk
"#clock-cells":
const: 1
required:
- compatible
- reg
- clocks
- "#clock-cells"
additionalProperties: false
examples:
- |
prci: clock-controller@10000000 {
compatible = "sifive,fu540-c000-prci";
reg = <0x10000000 0x1000>;
clocks = <&hfclk>, <&rtcclk>;
#clock-cells = <1>;
};