blob: 8ff3e2774ed8d1d0fd46cbf5895346f62252c5b0 [file] [log] [blame]
* Renesas RZ/A1 Clock Pulse Generator (CPG)
The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable
CPU and GPU clocks, and several fixed ratio dividers.
The CPG also provides a Clock Domain for SoC devices, in combination with the
CPG Module Stop (MSTP) Clocks.
Required Properties:
- compatible: Must be one of
- "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
and "renesas,rz-cpg-clocks" as a fallback.
- reg: Base address and length of the memory resource used by the CPG
- clocks: References to possible parent clocks. Order must match clock modes
in the datasheet. For the r7s72100, this is extal, usb_x1.
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "pll",
"i", and "g"
- #power-domain-cells: Must be 0
SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
through an MSTP clock should refer to the CPG device node in their
"power-domains" property, as documented by the generic PM domain bindings in
- CPG device node:
cpg_clocks: cpg_clocks@fcfe0000 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-cpg-clocks",
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
#power-domain-cells = <0>;
- CPG/MSTP Clock Domain member device node:
mtu2: timer@fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;