Documentation/devicetree/bindings/iio/adc/envelope-detector.txt

Bindings for ADC envelope detector using a DAC and a comparator

The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
                          _
                         | \
    input +------>-------|+ \
                         |   \
           .-------.     |    }---.
           |       |     |   /    |
           |    dac|-->--|- /     |
           |       |     |_/      |
           |       |              |
           |       |              |
           |    irq|------<-------'
           |       |
           '-------'

Required properties:
- compatible: Should be "axentia,tse850-envelope-detector"
- io-channels: Channel node of the dac to be used for comparator input.
- io-channel-names: Should be "dac".
- interrupt specification for one client interrupt,
  see ../../interrupt-controller/interrupts.txt for details.
- interrupt-names: Should be "comp".

Example:

	&i2c {
		dpot: mcp4651-104@28 {
			compatible = "microchip,mcp4651-104";
			reg = <0x28>;
			#io-channel-cells = <1>;
		};
	};

	dac: dac {
		compatible = "dpot-dac";
		vref-supply = <&reg_3v3>;
		io-channels = <&dpot 0>;
		io-channel-names = "dpot";
		#io-channel-cells = <1>;
	};

	envelope-detector {
		compatible = "axentia,tse850-envelope-detector";
		io-channels = <&dac 0>;
		io-channel-names = "dac";

		interrupt-parent = <&gpio>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		interrupt-names = "comp";
	};