blob: 0ee6e92a3c2987ca9543f3d26e7d75459667ffee [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* SAMSUNG EXYNOS5420 SoC cpu device tree source
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This file provides desired ordering for Exynos5420 and Exynos5800
* boards: CPU[0123] being the A15.
*
* The Exynos5420, 5422 and 5800 actually share the same CPU configuration
* but particular boards choose different booting order.
*
* Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
* booting cluster (big or LITTLE) is chosen by IROM code by reading
* the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
* from the LITTLE: Cortex-A7.
*/
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
};
};
&arm_a7_pmu {
interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
status = "okay";
};
&arm_a15_pmu {
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
status = "okay";
};