blob: d250f4b2bfedbd45662f29b1eb04793a21765985 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
*/
#include "armada-8040.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell 8040 MACCHIATOBin";
compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
aliases {
ethernet0 = &cp0_eth0;
ethernet1 = &cp1_eth0;
ethernet2 = &cp1_eth1;
ethernet3 = &cp1_eth2;
};
/* Regulator labels correspond with schematics */
v_3_3: regulator-3-3v {
compatible = "regulator-fixed";
regulator-name = "v_3_3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
status = "okay";
};
v_vddo_h: regulator-1-8v {
compatible = "regulator-fixed";
regulator-name = "v_vddo_h";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
status = "okay";
};
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
status = "okay";
};
sfp_eth0: sfp-eth0 {
/* CON15,16 - CPM lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp0_i2c>;
los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp0_pins>;
};
sfp_eth1: sfp-eth1 {
/* CON17,18 - CPS lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp1_i2c>;
los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
};
sfp_eth3: sfp-eth3 {
/* CON13,14 - CPS lane 5 */
compatible = "sff,sfp";
i2c-bus = <&sfp_1g_i2c>;
los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
};
};
&uart0 {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&ap_sdhci0 {
bus-width = <8>;
/*
* Not stable in HS modes - phy needs "more calibration", so add
* the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
*/
marvell,xenon-phy-slow-mode;
no-1-8-v;
no-sd;
no-sdio;
non-removable;
status = "okay";
vqmmc-supply = <&v_vddo_h>;
};
&cp0_i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
};
&cp0_i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
sfpp0_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
sfpp1_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
sfp_1g_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
};
};
/* J25 UART header */
&cp0_uart1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_uart1_pins>;
status = "okay";
};
&cp0_mdio {
pinctrl-names = "default";
pinctrl-0 = <&cp0_ge_mdio_pins>;
status = "okay";
ge_phy: ethernet-phy@0 {
reg = <0>;
};
};
&cp0_pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
<&cp0_comphy2 0>, <&cp0_comphy3 0>;
phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
"cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
status = "okay";
};
&cp0_pinctrl {
cp0_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
cp0_i2c1_pins: i2c1-pins {
marvell,pins = "mpp35", "mpp36";
marvell,function = "i2c1";
};
cp0_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
cp0_uart1_pins: uart1-pins {
marvell,pins = "mpp40", "mpp41";
marvell,function = "uart1";
};
cp0_xhci_vbus_pins: xhci0-vbus-pins {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
cp0_sfp_1g_pins: sfp-1g-pins {
marvell,pins = "mpp51", "mpp53", "mpp54";
marvell,function = "gpio";
};
cp0_pcie_pins: pcie-pins {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
cp0_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
marvell,function = "sdio";
};
cp0_sfpp1_pins: sfpp1-pins {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy4 0>;
};
&cp0_sata0 {
status = "okay";
/* CPM Lane 5 - U29 */
sata-port@1 {
phys = <&cp0_comphy5 1>;
phy-names = "cp0-sata0-1-phy";
};
};
&cp0_sdhci0 {
/* U6 */
broken-cd;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
&cp0_usb3_0 {
/* J38? - USB2.0 only */
status = "okay";
};
&cp0_usb3_1 {
/* J38? - USB2.0 only */
status = "okay";
};
&cp1_ethernet {
status = "okay";
};
&cp1_eth0 {
/* Generic PHY, providing serdes lanes */
phys = <&cp1_comphy4 0>;
};
&cp1_eth1 {
/* CPS Lane 0 - J5 (Gigabit RJ45) */
status = "okay";
/* Network PHY */
phy = <&ge_phy>;
phy-mode = "sgmii";
/* Generic PHY, providing serdes lanes */
phys = <&cp1_comphy0 1>;
};
&cp1_eth2 {
/* CPS Lane 5 */
status = "okay";
/* Network PHY */
phy-mode = "2500base-x";
managed = "in-band-status";
/* Generic PHY, providing serdes lanes */
phys = <&cp1_comphy5 2>;
sfp = <&sfp_eth3>;
};
&cp1_pinctrl {
cp1_sfpp1_pins: sfpp1-pins {
marvell,pins = "mpp8", "mpp10", "mpp11";
marvell,function = "gpio";
};
cp1_spi1_pins: spi1-pins {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
cp1_uart0_pins: uart0-pins {
marvell,pins = "mpp6", "mpp7";
marvell,function = "uart0";
};
cp1_sfp_1g_pins: sfp-1g-pins {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
cp1_sfpp0_pins: sfpp0-pins {
marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
marvell,function = "gpio";
};
};
/* J27 UART header */
&cp1_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&cp1_uart0_pins>;
status = "okay";
};
&cp1_sata0 {
status = "okay";
/* CPS Lane 1 - U32 */
sata-port@0 {
phys = <&cp1_comphy1 0>;
phy-names = "cp1-sata0-0-phy";
};
/* CPS Lane 3 - U31 */
sata-port@1 {
phys = <&cp1_comphy3 1>;
phy-names = "cp1-sata0-1-phy";
};
};
&cp1_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
compatible = "st,w25q32";
spi-max-frequency = <50000000>;
reg = <0>;
};
};
&cp1_comphy2 {
cp1_usbh0_con: connector {
compatible = "usb-a-connector";
phy-supply = <&v_5v0_usb3_hst_vbus>;
};
};
&cp1_usb3_0 {
/* CPS Lane 2 - CON7 */
phys = <&cp1_comphy2 0>;
phy-names = "cp1-usb3h0-comphy";
status = "okay";
};