blob: 7a95366f6516f87ddb93be06e514e290d893c2ee [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* DFL device driver for Nios private feature on Intel PAC (Programmable
* Acceleration Card) N3000
*
* Copyright (C) 2019-2020 Intel Corporation, Inc.
*
* Authors:
* Wu Hao <hao.wu@intel.com>
* Xu Yilun <yilun.xu@intel.com>
*/
#include <linux/bitfield.h>
#include <linux/dfl.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/stddef.h>
#include <linux/spi/altera.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
/*
* N3000 Nios private feature registers, named as NIOS_SPI_XX on spec.
* NS is the abbreviation of NIOS_SPI.
*/
#define N3000_NS_PARAM 0x8
#define N3000_NS_PARAM_SHIFT_MODE_MSK BIT_ULL(1)
#define N3000_NS_PARAM_SHIFT_MODE_MSB 0
#define N3000_NS_PARAM_SHIFT_MODE_LSB 1
#define N3000_NS_PARAM_DATA_WIDTH GENMASK_ULL(7, 2)
#define N3000_NS_PARAM_NUM_CS GENMASK_ULL(13, 8)
#define N3000_NS_PARAM_CLK_POL BIT_ULL(14)
#define N3000_NS_PARAM_CLK_PHASE BIT_ULL(15)
#define N3000_NS_PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32)
#define N3000_NS_CTRL 0x10
#define N3000_NS_CTRL_WR_DATA GENMASK_ULL(31, 0)
#define N3000_NS_CTRL_ADDR GENMASK_ULL(44, 32)
#define N3000_NS_CTRL_CMD_MSK GENMASK_ULL(63, 62)
#define N3000_NS_CTRL_CMD_NOP 0
#define N3000_NS_CTRL_CMD_RD 1
#define N3000_NS_CTRL_CMD_WR 2
#define N3000_NS_STAT 0x18
#define N3000_NS_STAT_RD_DATA GENMASK_ULL(31, 0)
#define N3000_NS_STAT_RW_VAL BIT_ULL(32)
/* Nios handshake registers, indirect access */
#define N3000_NIOS_INIT 0x1000
#define N3000_NIOS_INIT_DONE BIT(0)
#define N3000_NIOS_INIT_START BIT(1)
/* Mode for retimer A, link 0, the same below */
#define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK GENMASK(9, 8)
#define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK GENMASK(11, 10)
#define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK GENMASK(13, 12)
#define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK GENMASK(15, 14)
#define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK GENMASK(17, 16)
#define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK GENMASK(19, 18)
#define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK GENMASK(21, 20)
#define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK GENMASK(23, 22)
#define N3000_NIOS_INIT_REQ_FEC_MODE_NO 0x0
#define N3000_NIOS_INIT_REQ_FEC_MODE_KR 0x1
#define N3000_NIOS_INIT_REQ_FEC_MODE_RS 0x2
#define N3000_NIOS_FW_VERSION 0x1004
#define N3000_NIOS_FW_VERSION_PATCH GENMASK(23, 20)
#define N3000_NIOS_FW_VERSION_MINOR GENMASK(27, 24)
#define N3000_NIOS_FW_VERSION_MAJOR GENMASK(31, 28)
/* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */
#define N3000_NIOS_PKVL_A_MODE_STS 0x1020
#define N3000_NIOS_PKVL_B_MODE_STS 0x1024
#define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8)
#define N3000_NIOS_PKVL_MODE_STS_GROUP_OK 0x0
#define N3000_NIOS_PKVL_MODE_STS_ID_MSK GENMASK(7, 0)
/* When GROUP MASK field == GROUP_OK */
#define N3000_NIOS_PKVL_MODE_ID_RESET 0x0
#define N3000_NIOS_PKVL_MODE_ID_4X10G 0x1
#define N3000_NIOS_PKVL_MODE_ID_4X25G 0x2
#define N3000_NIOS_PKVL_MODE_ID_2X25G 0x3
#define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G 0x4
#define N3000_NIOS_PKVL_MODE_ID_1X25G 0x5
#define N3000_NIOS_REGBUS_RETRY_COUNT 10000 /* loop count */
#define N3000_NIOS_INIT_TIMEOUT 10000000 /* usec */
#define N3000_NIOS_INIT_TIME_INTV 100000 /* usec */
#define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL \
(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK | \
N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK)
#define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL \
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_NO))
#define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL \
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_KR))
#define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL \
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
N3000_NIOS_INIT_REQ_FEC_MODE_RS))
struct n3000_nios {
void __iomem *base;
struct regmap *regmap;
struct device *dev;
struct platform_device *altera_spi;
};
static ssize_t nios_fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct n3000_nios *nn = dev_get_drvdata(dev);
unsigned int val;
int ret;
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
if (ret)
return ret;
return sysfs_emit(buf, "%x.%x.%x\n",
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val),
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val),
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val));
}
static DEVICE_ATTR_RO(nios_fw_version);
#define IS_MODE_STATUS_OK(mode_stat) \
(FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) == \
N3000_NIOS_PKVL_MODE_STS_GROUP_OK)
#define IS_RETIMER_FEC_SUPPORTED(retimer_mode) \
((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET && \
(retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G)
static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg,
unsigned int *retimer_mode)
{
unsigned int val;
int ret;
ret = regmap_read(nn->regmap, mode_stat_reg, &val);
if (ret)
return ret;
if (!IS_MODE_STATUS_OK(val))
return -EFAULT;
*retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val);
return 0;
}
static ssize_t retimer_A_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct n3000_nios *nn = dev_get_drvdata(dev);
unsigned int mode;
int ret;
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode);
if (ret)
return ret;
return sysfs_emit(buf, "0x%x\n", mode);
}
static DEVICE_ATTR_RO(retimer_A_mode);
static ssize_t retimer_B_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct n3000_nios *nn = dev_get_drvdata(dev);
unsigned int mode;
int ret;
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode);
if (ret)
return ret;
return sysfs_emit(buf, "0x%x\n", mode);
}
static DEVICE_ATTR_RO(retimer_B_mode);
static ssize_t fec_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes;
struct n3000_nios *nn = dev_get_drvdata(dev);
int ret;
/* FEC mode setting is not supported in early FW versions */
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
if (ret)
return ret;
if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3)
return sysfs_emit(buf, "not supported\n");
/* If no 25G links, FEC mode setting is not supported either */
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode);
if (ret)
return ret;
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode);
if (ret)
return ret;
if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) &&
!IS_RETIMER_FEC_SUPPORTED(retimer_b_mode))
return sysfs_emit(buf, "not supported\n");
/* get the valid FEC mode for 25G links */
ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
if (ret)
return ret;
/*
* FEC mode should always be the same for all links, as we set them
* in this way.
*/
fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL);
if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL)
return sysfs_emit(buf, "no\n");
else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL)
return sysfs_emit(buf, "kr\n");
else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL)
return sysfs_emit(buf, "rs\n");
return -EFAULT;
}
static DEVICE_ATTR_RO(fec_mode);
static struct attribute *n3000_nios_attrs[] = {
&dev_attr_nios_fw_version.attr,
&dev_attr_retimer_A_mode.attr,
&dev_attr_retimer_B_mode.attr,
&dev_attr_fec_mode.attr,
NULL,
};
ATTRIBUTE_GROUPS(n3000_nios);
static int n3000_nios_init_done_check(struct n3000_nios *nn)
{
unsigned int val, state_a, state_b;
struct device *dev = nn->dev;
int ret, ret2;
/*
* The SPI is shared by the Nios core inside the FPGA, Nios will use
* this SPI master to do some one time initialization after power up,
* and then release the control to OS. The driver needs to poll on
* INIT_DONE to see when driver could take the control.
*
* Please note that after Nios firmware version 3.0.0, INIT_START is
* introduced, so driver needs to trigger START firstly and then check
* INIT_DONE.
*/
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
if (ret)
return ret;
/*
* If Nios version register is totally uninitialized(== 0x0), then the
* Nios firmware is missing. So host could take control of SPI master
* safely, but initialization work for Nios is not done. To restore the
* card, we need to reprogram a new Nios firmware via the BMC chip on
* SPI bus. So the driver doesn't error out, it continues to create the
* spi controller device and spi_board_info for BMC.
*/
if (val == 0) {
dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n",
val);
return 0;
}
if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) {
/* read NIOS_INIT to check if retimer initialization is done */
ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
if (ret)
return ret;
/* check if retimers are initialized already */
if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START))
goto nios_init_done;
/* configure FEC mode per module param */
val = N3000_NIOS_INIT_START;
/*
* When the retimer is to be set to 10G mode, there is no FEC
* mode setting, so the REQ_FEC_MODE field will be ignored by
* Nios firmware in this case. But we should still fill the FEC
* mode field cause host could not get the retimer working mode
* until the Nios init is done.
*
* For now the driver doesn't support the retimer FEC mode
* switching per user's request. It is always set to Reed
* Solomon FEC.
*
* The driver will set the same FEC mode for all links.
*/
val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL;
ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val);
if (ret)
return ret;
}
nios_init_done:
/* polls on NIOS_INIT_DONE */
ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val,
val & N3000_NIOS_INIT_DONE,
N3000_NIOS_INIT_TIME_INTV,
N3000_NIOS_INIT_TIMEOUT);
if (ret)
dev_err(dev, "NIOS_INIT_DONE %s\n",
(ret == -ETIMEDOUT) ? "timed out" : "check error");
ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a);
if (ret2)
return ret2;
ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b);
if (ret2)
return ret2;
if (!ret) {
/*
* After INIT_DONE is detected, it still needs to check if the
* Nios firmware reports any error during the retimer
* configuration.
*/
if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b))
return 0;
/*
* If the retimer configuration is failed, the Nios firmware
* will still release the spi controller for host to
* communicate with the BMC. It makes possible for people to
* reprogram a new Nios firmware and restore the card. So the
* driver doesn't error out, it continues to create the spi
* controller device and spi_board_info for BMC.
*/
dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n");
}
dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a);
dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b);
return ret;
}
static struct spi_board_info m10_n3000_info = {
.modalias = "m10-n3000",
.max_speed_hz = 12500000,
.bus_num = 0,
.chip_select = 0,
};
static int create_altera_spi_controller(struct n3000_nios *nn)
{
struct altera_spi_platform_data pdata = { 0 };
struct platform_device_info pdevinfo = { 0 };
void __iomem *base = nn->base;
u64 v;
v = readq(base + N3000_NS_PARAM);
pdata.mode_bits = SPI_CS_HIGH;
if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v))
pdata.mode_bits |= SPI_CPOL;
if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v))
pdata.mode_bits |= SPI_CPHA;
pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v);
pdata.bits_per_word_mask =
SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v));
pdata.num_devices = 1;
pdata.devices = &m10_n3000_info;
dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
pdata.num_chipselect, pdata.bits_per_word_mask,
pdata.mode_bits);
pdevinfo.name = "subdev_spi_altera";
pdevinfo.id = PLATFORM_DEVID_AUTO;
pdevinfo.parent = nn->dev;
pdevinfo.data = &pdata;
pdevinfo.size_data = sizeof(pdata);
nn->altera_spi = platform_device_register_full(&pdevinfo);
return PTR_ERR_OR_ZERO(nn->altera_spi);
}
static void destroy_altera_spi_controller(struct n3000_nios *nn)
{
platform_device_unregister(nn->altera_spi);
}
static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v)
{
int loops;
/*
* We don't use the time based timeout here for performance.
*
* The regbus read/write is on the critical path of Intel PAC N3000
* image programing. The time based timeout checking will add too much
* overhead on it. Usually the state changes in 1 or 2 loops on the
* test server, and we set 10000 times loop here for safety.
*/
for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) {
*v = readq(base + N3000_NS_STAT);
if (*v & N3000_NS_STAT_RW_VAL)
break;
cpu_relax();
}
return (loops > 0) ? 0 : -ETIMEDOUT;
}
static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct n3000_nios *nn = context;
u64 v;
int ret;
v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) |
FIELD_PREP(N3000_NS_CTRL_ADDR, reg) |
FIELD_PREP(N3000_NS_CTRL_WR_DATA, val);
writeq(v, nn->base + N3000_NS_CTRL);
ret = n3000_nios_poll_stat_timeout(nn->base, &v);
if (ret)
dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n",
reg, val, ret);
return ret;
}
static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct n3000_nios *nn = context;
u64 v;
int ret;
v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) |
FIELD_PREP(N3000_NS_CTRL_ADDR, reg);
writeq(v, nn->base + N3000_NS_CTRL);
ret = n3000_nios_poll_stat_timeout(nn->base, &v);
if (ret)
dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret);
else
*val = FIELD_GET(N3000_NS_STAT_RD_DATA, v);
return ret;
}
static const struct regmap_config n3000_nios_regbus_cfg = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.fast_io = true,
.reg_write = n3000_nios_reg_write,
.reg_read = n3000_nios_reg_read,
};
static int n3000_nios_probe(struct dfl_device *ddev)
{
struct device *dev = &ddev->dev;
struct n3000_nios *nn;
int ret;
nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL);
if (!nn)
return -ENOMEM;
dev_set_drvdata(&ddev->dev, nn);
nn->dev = dev;
nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res);
if (IS_ERR(nn->base))
return PTR_ERR(nn->base);
nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg);
if (IS_ERR(nn->regmap))
return PTR_ERR(nn->regmap);
ret = n3000_nios_init_done_check(nn);
if (ret)
return ret;
ret = create_altera_spi_controller(nn);
if (ret)
dev_err(dev, "altera spi controller create failed: %d\n", ret);
return ret;
}
static void n3000_nios_remove(struct dfl_device *ddev)
{
struct n3000_nios *nn = dev_get_drvdata(&ddev->dev);
destroy_altera_spi_controller(nn);
}
#define FME_FEATURE_ID_N3000_NIOS 0xd
static const struct dfl_device_id n3000_nios_ids[] = {
{ FME_ID, FME_FEATURE_ID_N3000_NIOS },
{ }
};
MODULE_DEVICE_TABLE(dfl, n3000_nios_ids);
static struct dfl_driver n3000_nios_driver = {
.drv = {
.name = "dfl-n3000-nios",
.dev_groups = n3000_nios_groups,
},
.id_table = n3000_nios_ids,
.probe = n3000_nios_probe,
.remove = n3000_nios_remove,
};
module_dfl_driver(n3000_nios_driver);
MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000");
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");