blob: 385eb7bba05a5afd7320a80f94e756e97ccbd19d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
//
// HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets
//
// Copyright (c) 2019 HiSilicon Technologies Co., Ltd.
// Author: John Garry <john.garry@huawei.com>
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/dmi.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
#define HISI_SFC_V3XX_VERSION (0x1f8)
#define HISI_SFC_V3XX_GLB_CFG (0x100)
#define HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE BIT(2)
#define HISI_SFC_V3XX_RAW_INT_STAT (0x120)
#define HISI_SFC_V3XX_INT_STAT (0x124)
#define HISI_SFC_V3XX_INT_MASK (0x128)
#define HISI_SFC_V3XX_INT_CLR (0x12c)
#define HISI_SFC_V3XX_CMD_CFG (0x300)
#define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9
#define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8)
#define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7)
#define HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF 4
#define HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK BIT(3)
#define HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF 1
#define HISI_SFC_V3XX_CMD_CFG_START_MSK BIT(0)
#define HISI_SFC_V3XX_CMD_INS (0x308)
#define HISI_SFC_V3XX_CMD_ADDR (0x30c)
#define HISI_SFC_V3XX_CMD_DATABUF0 (0x400)
/* Common definition of interrupt bit masks */
#define HISI_SFC_V3XX_INT_MASK_ALL (0x1ff) /* all the masks */
#define HISI_SFC_V3XX_INT_MASK_CPLT BIT(0) /* command execution complete */
#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2) /* page progrom error */
#define HISI_SFC_V3XX_INT_MASK_IACCES BIT(5) /* error visiting inaccessible/
* protected address
*/
/* IO Mode definition in HISI_SFC_V3XX_CMD_CFG */
#define HISI_SFC_V3XX_STD (0 << 17)
#define HISI_SFC_V3XX_DIDO (1 << 17)
#define HISI_SFC_V3XX_DIO (2 << 17)
#define HISI_SFC_V3XX_FULL_DIO (3 << 17)
#define HISI_SFC_V3XX_QIQO (5 << 17)
#define HISI_SFC_V3XX_QIO (6 << 17)
#define HISI_SFC_V3XX_FULL_QIO (7 << 17)
/*
* The IO modes lookup table. hisi_sfc_v3xx_io_modes[(z - 1) / 2][y / 2][x / 2]
* stands for x-y-z mode, as described in SFDP terminology. -EIO indicates
* an invalid mode.
*/
static const int hisi_sfc_v3xx_io_modes[2][3][3] = {
{
{ HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO },
{ HISI_SFC_V3XX_DIO, HISI_SFC_V3XX_FULL_DIO, -EIO },
{ -EIO, -EIO, -EIO },
},
{
{ HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO },
{ -EIO, -EIO, -EIO },
{ HISI_SFC_V3XX_QIO, -EIO, HISI_SFC_V3XX_FULL_QIO },
},
};
struct hisi_sfc_v3xx_host {
struct device *dev;
void __iomem *regbase;
int max_cmd_dword;
struct completion *completion;
u8 address_mode;
int irq;
};
static void hisi_sfc_v3xx_disable_int(struct hisi_sfc_v3xx_host *host)
{
writel(0, host->regbase + HISI_SFC_V3XX_INT_MASK);
}
static void hisi_sfc_v3xx_enable_int(struct hisi_sfc_v3xx_host *host)
{
writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_MASK);
}
static void hisi_sfc_v3xx_clear_int(struct hisi_sfc_v3xx_host *host)
{
writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_CLR);
}
/*
* The interrupt status register indicates whether an error occurs
* after per operation. Check it, and clear the interrupts for
* next time judgement.
*/
static int hisi_sfc_v3xx_handle_completion(struct hisi_sfc_v3xx_host *host)
{
u32 reg;
reg = readl(host->regbase + HISI_SFC_V3XX_RAW_INT_STAT);
hisi_sfc_v3xx_clear_int(host);
if (reg & HISI_SFC_V3XX_INT_MASK_IACCES) {
dev_err(host->dev, "fail to access protected address\n");
return -EIO;
}
if (reg & HISI_SFC_V3XX_INT_MASK_PP_ERR) {
dev_err(host->dev, "page program operation failed\n");
return -EIO;
}
/*
* The other bits of the interrupt registers is not currently
* used and probably not be triggered in this driver. When it
* happens, we regard it as an unsupported error here.
*/
if (!(reg & HISI_SFC_V3XX_INT_MASK_CPLT)) {
dev_err(host->dev, "unsupported error occurred, status=0x%x\n", reg);
return -EIO;
}
return 0;
}
#define HISI_SFC_V3XX_WAIT_TIMEOUT_US 1000000
#define HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US 10
static int hisi_sfc_v3xx_wait_cmd_idle(struct hisi_sfc_v3xx_host *host)
{
u32 reg;
return readl_poll_timeout(host->regbase + HISI_SFC_V3XX_CMD_CFG, reg,
!(reg & HISI_SFC_V3XX_CMD_CFG_START_MSK),
HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US,
HISI_SFC_V3XX_WAIT_TIMEOUT_US);
}
static int hisi_sfc_v3xx_adjust_op_size(struct spi_mem *mem,
struct spi_mem_op *op)
{
struct spi_device *spi = mem->spi;
struct hisi_sfc_v3xx_host *host;
uintptr_t addr = (uintptr_t)op->data.buf.in;
int max_byte_count;
host = spi_controller_get_devdata(spi->master);
max_byte_count = host->max_cmd_dword * 4;
if (!IS_ALIGNED(addr, 4) && op->data.nbytes >= 4)
op->data.nbytes = 4 - (addr % 4);
else if (op->data.nbytes > max_byte_count)
op->data.nbytes = max_byte_count;
return 0;
}
/*
* The controller only supports Standard SPI mode, Duall mode and
* Quad mode. Double sanitize the ops here to avoid OOB access.
*/
static bool hisi_sfc_v3xx_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
struct spi_device *spi = mem->spi;
struct hisi_sfc_v3xx_host *host;
host = spi_controller_get_devdata(spi->master);
if (op->data.buswidth > 4 || op->dummy.buswidth > 4 ||
op->addr.buswidth > 4 || op->cmd.buswidth > 4)
return false;
if (op->addr.nbytes != host->address_mode && op->addr.nbytes)
return false;
return spi_mem_default_supports_op(mem, op);
}
/*
* memcpy_{to,from}io doesn't gurantee 32b accesses - which we require for the
* DATABUF registers -so use __io{read,write}32_copy when possible. For
* trailing bytes, copy them byte-by-byte from the DATABUF register, as we
* can't clobber outside the source/dest buffer.
*
* For efficient data read/write, we try to put any start 32b unaligned data
* into a separate transaction in hisi_sfc_v3xx_adjust_op_size().
*/
static void hisi_sfc_v3xx_read_databuf(struct hisi_sfc_v3xx_host *host,
u8 *to, unsigned int len)
{
void __iomem *from;
int i;
from = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0;
if (IS_ALIGNED((uintptr_t)to, 4)) {
int words = len / 4;
__ioread32_copy(to, from, words);
len -= words * 4;
if (len) {
u32 val;
to += words * 4;
from += words * 4;
val = __raw_readl(from);
for (i = 0; i < len; i++, val >>= 8, to++)
*to = (u8)val;
}
} else {
for (i = 0; i < DIV_ROUND_UP(len, 4); i++, from += 4) {
u32 val = __raw_readl(from);
int j;
for (j = 0; j < 4 && (j + (i * 4) < len);
to++, val >>= 8, j++)
*to = (u8)val;
}
}
}
static void hisi_sfc_v3xx_write_databuf(struct hisi_sfc_v3xx_host *host,
const u8 *from, unsigned int len)
{
void __iomem *to;
int i;
to = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0;
if (IS_ALIGNED((uintptr_t)from, 4)) {
int words = len / 4;
__iowrite32_copy(to, from, words);
len -= words * 4;
if (len) {
u32 val = 0;
to += words * 4;
from += words * 4;
for (i = 0; i < len; i++, from++)
val |= *from << i * 8;
__raw_writel(val, to);
}
} else {
for (i = 0; i < DIV_ROUND_UP(len, 4); i++, to += 4) {
u32 val = 0;
int j;
for (j = 0; j < 4 && (j + (i * 4) < len);
from++, j++)
val |= *from << j * 8;
__raw_writel(val, to);
}
}
}
static int hisi_sfc_v3xx_start_bus(struct hisi_sfc_v3xx_host *host,
const struct spi_mem_op *op,
u8 chip_select)
{
int len = op->data.nbytes, buswidth_mode;
u32 config = 0;
if (op->addr.nbytes)
config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
if (op->data.buswidth == 0 || op->data.buswidth == 1) {
buswidth_mode = HISI_SFC_V3XX_STD;
} else {
int data_idx, addr_idx, cmd_idx;
data_idx = (op->data.buswidth - 1) / 2;
addr_idx = op->addr.buswidth / 2;
cmd_idx = op->cmd.buswidth / 2;
buswidth_mode = hisi_sfc_v3xx_io_modes[data_idx][addr_idx][cmd_idx];
}
if (buswidth_mode < 0)
return buswidth_mode;
config |= buswidth_mode;
if (op->data.dir != SPI_MEM_NO_DATA) {
config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF;
config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK;
}
if (op->data.dir == SPI_MEM_DATA_IN)
config |= HISI_SFC_V3XX_CMD_CFG_RW_MSK;
config |= op->dummy.nbytes << HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF |
chip_select << HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF |
HISI_SFC_V3XX_CMD_CFG_START_MSK;
writel(op->addr.val, host->regbase + HISI_SFC_V3XX_CMD_ADDR);
writel(op->cmd.opcode, host->regbase + HISI_SFC_V3XX_CMD_INS);
writel(config, host->regbase + HISI_SFC_V3XX_CMD_CFG);
return 0;
}
static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
const struct spi_mem_op *op,
u8 chip_select)
{
DECLARE_COMPLETION_ONSTACK(done);
int ret;
if (host->irq) {
host->completion = &done;
hisi_sfc_v3xx_enable_int(host);
}
if (op->data.dir == SPI_MEM_DATA_OUT)
hisi_sfc_v3xx_write_databuf(host, op->data.buf.out, op->data.nbytes);
ret = hisi_sfc_v3xx_start_bus(host, op, chip_select);
if (ret)
return ret;
if (host->irq) {
ret = wait_for_completion_timeout(host->completion,
usecs_to_jiffies(HISI_SFC_V3XX_WAIT_TIMEOUT_US));
if (!ret)
ret = -ETIMEDOUT;
else
ret = 0;
hisi_sfc_v3xx_disable_int(host);
host->completion = NULL;
} else {
ret = hisi_sfc_v3xx_wait_cmd_idle(host);
}
if (hisi_sfc_v3xx_handle_completion(host) || ret)
return -EIO;
if (op->data.dir == SPI_MEM_DATA_IN)
hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, op->data.nbytes);
return 0;
}
static int hisi_sfc_v3xx_exec_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
struct hisi_sfc_v3xx_host *host;
struct spi_device *spi = mem->spi;
u8 chip_select = spi->chip_select;
host = spi_controller_get_devdata(spi->master);
return hisi_sfc_v3xx_generic_exec_op(host, op, chip_select);
}
static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = {
.adjust_op_size = hisi_sfc_v3xx_adjust_op_size,
.supports_op = hisi_sfc_v3xx_supports_op,
.exec_op = hisi_sfc_v3xx_exec_op,
};
static irqreturn_t hisi_sfc_v3xx_isr(int irq, void *data)
{
struct hisi_sfc_v3xx_host *host = data;
hisi_sfc_v3xx_disable_int(host);
complete(host->completion);
return IRQ_HANDLED;
}
static int hisi_sfc_v3xx_buswidth_override_bits;
/*
* ACPI FW does not allow us to currently set the device buswidth, so quirk it
* depending on the board.
*/
static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d)
{
hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD;
return 0;
}
static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[] = {
{
.callback = hisi_sfc_v3xx_dmi_quirk,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
DMI_MATCH(DMI_PRODUCT_NAME, "D06"),
},
},
{
.callback = hisi_sfc_v3xx_dmi_quirk,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"),
},
},
{
.callback = hisi_sfc_v3xx_dmi_quirk,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"),
},
},
{}
};
static int hisi_sfc_v3xx_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct hisi_sfc_v3xx_host *host;
struct spi_controller *ctlr;
u32 version, glb_config;
int ret;
ctlr = spi_alloc_master(&pdev->dev, sizeof(*host));
if (!ctlr)
return -ENOMEM;
ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits;
host = spi_controller_get_devdata(ctlr);
host->dev = dev;
platform_set_drvdata(pdev, host);
host->regbase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->regbase)) {
ret = PTR_ERR(host->regbase);
goto err_put_master;
}
host->irq = platform_get_irq_optional(pdev, 0);
if (host->irq == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto err_put_master;
}
hisi_sfc_v3xx_disable_int(host);
if (host->irq > 0) {
ret = devm_request_irq(dev, host->irq, hisi_sfc_v3xx_isr, 0,
"hisi-sfc-v3xx", host);
if (ret) {
dev_err(dev, "failed to request irq%d, ret = %d\n", host->irq, ret);
host->irq = 0;
}
} else {
host->irq = 0;
}
ctlr->bus_num = -1;
ctlr->num_chipselect = 1;
ctlr->mem_ops = &hisi_sfc_v3xx_mem_ops;
/*
* The address mode of the controller is either 3 or 4,
* which is indicated by the address mode bit in
* the global config register. The register is read only
* for the OS driver.
*/
glb_config = readl(host->regbase + HISI_SFC_V3XX_GLB_CFG);
if (glb_config & HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE)
host->address_mode = 4;
else
host->address_mode = 3;
version = readl(host->regbase + HISI_SFC_V3XX_VERSION);
if (version >= 0x351)
host->max_cmd_dword = 64;
else
host->max_cmd_dword = 16;
ret = devm_spi_register_controller(dev, ctlr);
if (ret)
goto err_put_master;
dev_info(&pdev->dev, "hw version 0x%x, %s mode.\n",
version, host->irq ? "irq" : "polling");
return 0;
err_put_master:
spi_master_put(ctlr);
return ret;
}
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hisi_sfc_v3xx_acpi_ids[] = {
{"HISI0341", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, hisi_sfc_v3xx_acpi_ids);
#endif
static struct platform_driver hisi_sfc_v3xx_spi_driver = {
.driver = {
.name = "hisi-sfc-v3xx",
.acpi_match_table = ACPI_PTR(hisi_sfc_v3xx_acpi_ids),
},
.probe = hisi_sfc_v3xx_probe,
};
static int __init hisi_sfc_v3xx_spi_init(void)
{
dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table);
return platform_driver_register(&hisi_sfc_v3xx_spi_driver);
}
static void __exit hisi_sfc_v3xx_spi_exit(void)
{
platform_driver_unregister(&hisi_sfc_v3xx_spi_driver);
}
module_init(hisi_sfc_v3xx_spi_init);
module_exit(hisi_sfc_v3xx_spi_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
MODULE_DESCRIPTION("HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets");