# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
%YAML 1.2
---
$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: TI J721E PCI Host (PCIe Wrapper)

maintainers:
  - Kishon Vijay Abraham I <kishon@ti.com>

allOf:
  - $ref: "cdns-pcie-host.yaml#"

properties:
  compatible:
    enum:
      - ti,j721e-pcie-host

  reg:
    maxItems: 4

  reg-names:
    items:
      - const: intd_cfg
      - const: user_cfg
      - const: reg
      - const: cfg

  ti,syscon-pcie-ctrl:
    description: Phandle to the SYSCON entry required for configuring PCIe mode
      and link speed.
    $ref: /schemas/types.yaml#/definitions/phandle

  power-domains:
    maxItems: 1

  clocks:
    maxItems: 1
    description: clock-specifier to represent input to the PCIe

  clock-names:
    items:
      - const: fck

  vendor-id:
    const: 0x104c

  device-id:
    const: 0xb00d

  msi-map: true

required:
  - compatible
  - reg
  - reg-names
  - ti,syscon-pcie-ctrl
  - max-link-speed
  - num-lanes
  - power-domains
  - clocks
  - clock-names
  - vendor-id
  - device-id
  - msi-map
  - dma-coherent
  - dma-ranges
  - ranges
  - reset-gpios
  - phys
  - phy-names

examples:
  - |
    #include <dt-bindings/soc/ti,sci_pm_domain.h>
    #include <dt-bindings/gpio/gpio.h>

    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie0_rc: pcie@2900000 {
            compatible = "ti,j721e-pcie-host";
            reg = <0x00 0x02900000 0x00 0x1000>,
                  <0x00 0x02907000 0x00 0x400>,
                  <0x00 0x0d000000 0x00 0x00800000>,
                  <0x00 0x10000000 0x00 0x00001000>;
            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
            max-link-speed = <3>;
            num-lanes = <2>;
            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
            clocks = <&k3_clks 239 1>;
            clock-names = "fck";
            device_type = "pci";
            #address-cells = <3>;
            #size-cells = <2>;
            bus-range = <0x0 0xf>;
            vendor-id = <0x104c>;
            device-id = <0xb00d>;
            msi-map = <0x0 &gic_its 0x0 0x10000>;
            dma-coherent;
            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
            phys = <&serdes0_pcie_link>;
            phy-names = "pcie-phy";
            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
        };
    };