// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
 * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
 * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
 */

/dts-v1/;
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/common.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"

/ {
	model = "Pine64 Pinebook Pro";
	compatible = "pine64,pinebook-pro", "rockchip,rk3399";

	chosen {
		stdout-path = "serial2:1500000n8";
	};

	backlight: edp-backlight {
		compatible = "pwm-backlight";
		power-supply = <&vcc_12v>;
		pwms = <&pwm0 0 740740 0>;
	};

	edp_panel: edp-panel {
		compatible = "boe,nv140fhmn49";
		backlight = <&backlight>;
		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&panel_en_gpio>;
		power-supply = <&vcc3v3_panel>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				#address-cells = <1>;
				#size-cells = <0>;

				panel_in_edp: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&edp_out_panel>;
				};
			};
		};
	};

	/*
	 * Use separate nodes for gpio-keys to allow for selective deactivation
	 * of wakeup sources via sysfs without disabling the whole key
	 */
	gpio-key-lid {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&lidbtn_gpio>;

		lid {
			debounce-interval = <20>;
			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
			label = "Lid";
			linux,code = <SW_LID>;
			linux,input-type = <EV_SW>;
			wakeup-event-action = <EV_ACT_DEASSERTED>;
			wakeup-source;
		};
	};

	gpio-key-power {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pwrbtn_gpio>;

		power {
			debounce-interval = <20>;
			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
			label = "Power";
			linux,code = <KEY_POWER>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;

		green-led {
			color = <LED_COLOR_ID_GREEN>;
			default-state = "on";
			function = LED_FUNCTION_POWER;
			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
			label = "green:power";
		};

		red-led {
			color = <LED_COLOR_ID_RED>;
			default-state = "off";
			function = LED_FUNCTION_STANDBY;
			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
			label = "red:standby";
			panic-indicator;
			retain-state-suspended;
		};
	};

	/* Power sequence for SDIO WiFi module */
	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk808 1>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h_gpio>;
		post-power-on-delay-ms = <100>;
		power-off-delay-us = <500000>;

		/* WL_REG_ON on module */
		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
	};

	/* Audio components */
	es8316-sound {
		compatible = "simple-audio-card";
		pinctrl-names = "default";
		pinctrl-0 = <&hp_det_gpio>;
		simple-audio-card,name = "rockchip,es8316-codec";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,widgets =
			"Microphone", "Mic Jack",
			"Headphone", "Headphones",
			"Speaker", "Speaker";
		simple-audio-card,routing =
			"MIC1", "Mic Jack",
			"Headphones", "HPOL",
			"Headphones", "HPOR",
			"Speaker Amplifier INL", "HPOL",
			"Speaker Amplifier INR", "HPOR",
			"Speaker", "Speaker Amplifier OUTL",
			"Speaker", "Speaker Amplifier OUTR";

		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
		simple-audio-card,aux-devs = <&speaker_amp>;
		simple-audio-card,pin-switches = "Speaker";

		simple-audio-card,cpu {
			sound-dai = <&i2s1>;
		};

		simple-audio-card,codec {
			sound-dai = <&es8316>;
		};
	};

	speaker_amp: speaker-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
		sound-name-prefix = "Speaker Amplifier";
		VCC-supply = <&pa_5v>;
	};

	/* Power tree */
	/* Root power source */
	vcc_sysin: vcc-sysin {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sysin";
		regulator-always-on;
		regulator-boot-on;
	};

	/* Regulators supplied by vcc_sysin */
	/* LCD backlight supply */
	vcc_12v: vcc-12v {
		compatible = "regulator-fixed";
		regulator-name = "vcc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* Main 3.3 V supply */
	vcc3v3_sys: wifi_bat: vcc3v3-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-on-in-suspend;
		};
	};

	/* 5 V USB power supply */
	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwr_5v_gpio>;
		regulator-name = "vcc5v0_usb";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* RK3399 logic supply */
	vdd_log: vdd-log {
		compatible = "pwm-regulator";
		pwms = <&pwm2 0 25000 1>;
		regulator-name = "vdd_log";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <800000>;
		regulator-max-microvolt = <1400000>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-on-in-suspend;
		};
	};

	/* Regulators supplied by vcc3v3_sys */
	/* 0.9 V supply, always on */
	vcc_0v9: vcc-0v9 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_0v9";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <900000>;
		regulator-max-microvolt = <900000>;
		vin-supply = <&vcc3v3_sys>;
	};

	/* S3 1.8 V supply, switched by vcc1v8_s3 */
	vcca1v8_s3: vcc1v8-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcca1v8_s3";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc3v3_sys>;
	};

	/* micro SD card power */
	vcc3v0_sd: vcc3v0-sd {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
		regulator-name = "vcc3v0_sd";
		regulator-always-on;
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
		vin-supply = <&vcc3v3_sys>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* LCD panel power, called VCC3V3_S0 in schematic */
	vcc3v3_panel: vcc3v3-panel {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&lcdvcc_en_gpio>;
		regulator-name = "vcc3v3_panel";
		regulator-always-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-enable-ramp-delay = <100000>;
		vin-supply = <&vcc3v3_sys>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* M.2 adapter power, switched by vcc1v8_s3 */
	vcc3v3_ssd: vcc3v3-ssd {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_ssd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc3v3_sys>;
	};

	/* Regulators supplied by vcc5v0_usb */
	/* USB 3 port power supply regulator  */
	vcc5v0_otg: vcc5v0-otg {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_host_en_gpio>;
		regulator-name = "vcc5v0_otg";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc5v0_usb>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* Regulators supplied by vcc5v0_usb */
	/* Type C port power supply regulator */
	vbus_5vout: vbus_typec: vbus-5vout {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
		regulator-name = "vbus_5vout";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc5v0_usb>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	/* Regulators supplied by vcc_1v8 */
	/* Primary 0.9 V LDO */
	vcca0v9_s3: vcca0v9-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc0v9_s3";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_1v8>;

		regulator-state-mem {
			regulator-on-in-suspend;
		};
	};

	mains_charger: dc-charger {
		compatible = "gpio-charger";
		charger-type = "mains";
		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;

		/* Also triggered by USB charger */
		pinctrl-names = "default";
		pinctrl-0 = <&dc_det_gpio>;
	};
};

&cdn_dp {
	status = "okay";
};

&cpu_b0 {
	cpu-supply = <&vdd_cpu_b>;
};

&cpu_b1 {
	cpu-supply = <&vdd_cpu_b>;
};

&cpu_l0 {
	cpu-supply = <&vdd_cpu_l>;
};

&cpu_l1 {
	cpu-supply = <&vdd_cpu_l>;
};

&cpu_l2 {
	cpu-supply = <&vdd_cpu_l>;
};

&cpu_l3 {
	cpu-supply = <&vdd_cpu_l>;
};

&edp {
	force-hpd;
	pinctrl-names = "default";
	pinctrl-0 = <&edp_hpd>;
	status = "okay";

	ports {
		edp_out: port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			edp_out_panel: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&panel_in_edp>;
			};
		};
	};
};

&emmc_phy {
	status = "okay";
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi_sound {
	status = "okay";
};

&i2c0 {
	clock-frequency = <400000>;
	i2c-scl-falling-time-ns = <4>;
	i2c-scl-rising-time-ns = <168>;
	status = "okay";

	rk808: pmic@1b {
		compatible = "rockchip,rk808";
		reg = <0x1b>;
		#clock-cells = <1>;
		clock-output-names = "xin32k", "rk808-clkout2";
		interrupt-parent = <&gpio3>;
		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int_l_gpio>;
		rockchip,system-power-controller;
		wakeup-source;

		vcc1-supply = <&vcc_sysin>;
		vcc2-supply = <&vcc_sysin>;
		vcc3-supply = <&vcc_sysin>;
		vcc4-supply = <&vcc_sysin>;
		vcc6-supply = <&vcc_sysin>;
		vcc7-supply = <&vcc_sysin>;
		vcc8-supply = <&vcc3v3_sys>;
		vcc9-supply = <&vcc_sysin>;
		vcc10-supply = <&vcc_sysin>;
		vcc11-supply = <&vcc_sysin>;
		vcc12-supply = <&vcc3v3_sys>;
		vcc13-supply = <&vcc_sysin>;
		vcc14-supply = <&vcc_sysin>;

		regulators {
			/* rk3399 center logic supply */
			vdd_center: DCDC_REG1 {
				regulator-name = "vdd_center";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_cpu_l: DCDC_REG2 {
				regulator-name = "vdd_cpu_l";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-name = "vcc_ddr";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_1v8: vcc_wl: DCDC_REG4 {
				regulator-name = "vcc_1v8";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			/* not used */
			LDO_REG1 {
			};

			/* not used */
			LDO_REG2 {
			};

			vcc1v8_pmupll: LDO_REG3 {
				regulator-name = "vcc1v8_pmupll";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcc_sdio: LDO_REG4 {
				regulator-name = "vcc_sdio";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3000000>;

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3000000>;
				};
			};

			vcca3v0_codec: LDO_REG5 {
				regulator-name = "vcca3v0_codec";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v5: LDO_REG6 {
				regulator-name = "vcc_1v5";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1500000>;
				regulator-max-microvolt = <1500000>;

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1500000>;
				};
			};

			vcca1v8_codec: LDO_REG7 {
				regulator-name = "vcca1v8_codec";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_3v0: LDO_REG8 {
				regulator-name = "vcc_3v0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3000000>;
				};
			};

			vcc3v3_s3: SWITCH_REG1 {
				regulator-name = "vcc3v3_s3";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_s0: SWITCH_REG2 {
				regulator-name = "vcc3v3_s0";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};

	vdd_cpu_b: regulator@40 {
		compatible = "silergy,syr827";
		reg = <0x40>;
		fcs,suspend-voltage-selector = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&vsel1_gpio>;
		regulator-name = "vdd_cpu_b";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1500000>;
		regulator-ramp-delay = <1000>;
		vin-supply = <&vcc_1v8>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	vdd_gpu: regulator@41 {
		compatible = "silergy,syr828";
		reg = <0x41>;
		fcs,suspend-voltage-selector = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&vsel2_gpio>;
		regulator-name = "vdd_gpu";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1500000>;
		regulator-ramp-delay = <1000>;
		vin-supply = <&vcc_1v8>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};
};

&i2c1 {
	clock-frequency = <100000>;
	i2c-scl-falling-time-ns = <4>;
	i2c-scl-rising-time-ns = <168>;
	status = "okay";

	es8316: es8316@11 {
		compatible = "everest,es8316";
		reg = <0x11>;
		clocks = <&cru SCLK_I2S_8CH_OUT>;
		clock-names = "mclk";
		#sound-dai-cells = <0>;
	};
};

&i2c3 {
	i2c-scl-falling-time-ns = <15>;
	i2c-scl-rising-time-ns = <450>;
	status = "okay";
};

&i2c4 {
	i2c-scl-falling-time-ns = <20>;
	i2c-scl-rising-time-ns = <600>;
	status = "okay";

	fusb0: fusb30x@22 {
		compatible = "fcs,fusb302";
		reg = <0x22>;
		interrupt-parent = <&gpio1>;
		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&fusb0_int_gpio>;
		vbus-supply = <&vbus_typec>;

		connector {
			compatible = "usb-c-connector";
			data-role = "host";
			label = "USB-C";
			op-sink-microwatt = <1000000>;
			power-role = "dual";
			sink-pdos =
				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
			source-pdos =
				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
			try-power-role = "sink";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					usbc_hs: endpoint {
						remote-endpoint =
							<&u2phy0_typec_hs>;
					};
				};

				port@1 {
					reg = <1>;

					usbc_ss: endpoint {
						remote-endpoint =
							<&tcphy0_typec_ss>;
					};
				};

				port@2 {
					reg = <2>;

					usbc_dp: endpoint {
						remote-endpoint =
							<&tcphy0_typec_dp>;
					};
				};
			};
		};
	};
};

&i2s1 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
	rockchip,capture-channels = <8>;
	rockchip,playback-channels = <8>;
	status = "okay";
};

&io_domains {
	audio-supply = <&vcc_3v0>;
	gpio1830-supply = <&vcc_3v0>;
	sdmmc-supply = <&vcc_sdio>;
	status = "okay";
};

&pcie_phy {
	status = "okay";
};

&pcie0 {
	bus-scan-delay-ms = <1000>;
	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
	max-link-speed = <2>;
	num-lanes = <4>;
	pinctrl-names = "default";
	pinctrl-0 = <&pcie_clkreqn_cpm>;
	vpcie0v9-supply = <&vcca0v9_s3>;
	vpcie1v8-supply = <&vcca1v8_s3>;
	vpcie3v3-supply = <&vcc3v3_ssd>;
	status = "okay";
};

&pinctrl {
	buttons {
		pwrbtn_gpio: pwrbtn-gpio {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		lidbtn_gpio: lidbtn-gpio {
			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	dc-charger {
		dc_det_gpio: dc-det-gpio {
			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	es8316 {
		hp_det_gpio: hp-det-gpio {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	fusb302x {
		fusb0_int_gpio: fusb0-int-gpio {
			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	i2s1 {
		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
		};
	};

	lcd-panel {
		lcdvcc_en_gpio: lcdvcc-en-gpio {
			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		panel_en_gpio: panel-en-gpio {
			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	leds {
		pwrled_gpio: pwrled_gpio {
			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		slpled_gpio: slpled_gpio {
			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		pmic_int_l_gpio: pmic-int-l-gpio {
			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		vsel1_gpio: vsel1-gpio {
			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		vsel2_gpio: vsel2-gpio {
			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	sdcard {
		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

	};

	sdio-pwrseq {
		wifi_enable_h_gpio: wifi-enable-h-gpio {
			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb-typec {
		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	usb2 {
		pwr_5v_gpio: pwr-5v-gpio {
			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-bluetooth {
		bt_wake_gpio: bt-wake-gpio {
			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_host_wake_gpio: bt-host-wake-gpio {
			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_reset_gpio: bt-reset-gpio {
			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pmu_io_domains {
	pmu1830-supply = <&vcc_3v0>;
	status = "okay";
};

&pwm0 {
	status = "okay";
};

&pwm2 {
	status = "okay";
};

&saradc {
	vref-supply = <&vcca1v8_s3>;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
	disable-wp;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc3v0_sd>;
	vqmmc-supply = <&vcc_sdio>;
	status = "okay";
};

&sdio0 {
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
	sd-uhs-sdr104;
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	mmc-hs200-1_8v;
	non-removable;
	status = "okay";
};

&spi1 {
	max-freq = <10000000>;
	status = "okay";

	spiflash: flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		m25p,fast-read;
		spi-max-frequency = <10000000>;
	};
};

&tcphy0 {
	status = "okay";
};

&tcphy0_dp {
	port {
		tcphy0_typec_dp: endpoint {
			remote-endpoint = <&usbc_dp>;
		};
	};
};

&tcphy0_usb3 {
	port {
		tcphy0_typec_ss: endpoint {
			remote-endpoint = <&usbc_ss>;
		};
	};
};

&tcphy1 {
	status = "okay";
};

&tsadc {
	/* tshut mode 0:CRU 1:GPIO */
	rockchip,hw-tshut-mode = <1>;
	/* tshut polarity 0:LOW 1:HIGH */
	rockchip,hw-tshut-polarity = <1>;
	status = "okay";
};

&u2phy0 {
	status = "okay";

	u2phy0_otg: otg-port {
		status = "okay";
	};

	u2phy0_host: host-port {
		phy-supply = <&vcc5v0_otg>;
		status = "okay";
	};

	port {
		u2phy0_typec_hs: endpoint {
			remote-endpoint = <&usbc_hs>;
		};
	};
};

&u2phy1 {
	status = "okay";

	u2phy1_otg: otg-port {
		status = "okay";
	};

	u2phy1_host: host-port {
		phy-supply = <&vcc5v0_otg>;
		status = "okay";
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4345c5";
		clocks = <&rk808 1>;
		clock-names = "lpo";
		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
		max-speed = <1500000>;
		pinctrl-names = "default";
		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
		vbat-supply = <&wifi_bat>;
		vddio-supply = <&vcc_wl>;
	};
};

&uart2 {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usbdrd3_0 {
	status = "okay";
};

&usbdrd_dwc3_0 {
	dr_mode = "host";
	status = "okay";
};

&usbdrd3_1 {
	status = "okay";
};

&usbdrd_dwc3_1 {
	dr_mode = "host";
	status = "okay";
};

&vopb {
	status = "okay";
};

&vopb_mmu {
	status = "okay";
};

&vopl {
	status = "okay";
};

&vopl_mmu {
	status = "okay";
};