| /* |
| * Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "asm/macroAssembler.hpp" |
| #include "memory/resourceArea.hpp" |
| #include "nativeInst_sparc.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "runtime/handles.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/stubRoutines.hpp" |
| #include "utilities/ostream.hpp" |
| #ifdef COMPILER1 |
| #include "c1/c1_Runtime1.hpp" |
| #endif |
| |
| |
| bool NativeInstruction::is_dtrace_trap() { |
| return !is_nop(); |
| } |
| |
| void NativeInstruction::set_data64_sethi(address instaddr, intptr_t x) { |
| ResourceMark rm; |
| CodeBuffer buf(instaddr, 10 * BytesPerInstWord ); |
| MacroAssembler* _masm = new MacroAssembler(&buf); |
| Register destreg; |
| |
| destreg = inv_rd(*(unsigned int *)instaddr); |
| // Generate a the new sequence |
| _masm->patchable_sethi(x, destreg); |
| ICache::invalidate_range(instaddr, 7 * BytesPerInstWord); |
| } |
| |
| void NativeInstruction::verify_data64_sethi(address instaddr, intptr_t x) { |
| ResourceMark rm; |
| unsigned char buffer[10 * BytesPerInstWord]; |
| CodeBuffer buf(buffer, 10 * BytesPerInstWord); |
| MacroAssembler masm(&buf); |
| |
| Register destreg = inv_rd(*(unsigned int *)instaddr); |
| // Generate the proper sequence into a temporary buffer and compare |
| // it with the original sequence. |
| masm.patchable_sethi(x, destreg); |
| int len = buffer - masm.pc(); |
| for (int i = 0; i < len; i++) { |
| assert(instaddr[i] == buffer[i], "instructions must match"); |
| } |
| } |
| |
| void NativeInstruction::verify() { |
| // make sure code pattern is actually an instruction address |
| address addr = addr_at(0); |
| if (addr == 0 || ((intptr_t)addr & 3) != 0) { |
| fatal("not an instruction address"); |
| } |
| } |
| |
| void NativeInstruction::print() { |
| tty->print_cr(INTPTR_FORMAT ": 0x%x", addr_at(0), long_at(0)); |
| } |
| |
| void NativeInstruction::set_long_at(int offset, int i) { |
| address addr = addr_at(offset); |
| *(int*)addr = i; |
| ICache::invalidate_word(addr); |
| } |
| |
| void NativeInstruction::set_jlong_at(int offset, jlong i) { |
| address addr = addr_at(offset); |
| *(jlong*)addr = i; |
| // Don't need to invalidate 2 words here, because |
| // the flush instruction operates on doublewords. |
| ICache::invalidate_word(addr); |
| } |
| |
| void NativeInstruction::set_addr_at(int offset, address x) { |
| address addr = addr_at(offset); |
| assert( ((intptr_t)addr & (wordSize-1)) == 0, "set_addr_at bad address alignment"); |
| *(uintptr_t*)addr = (uintptr_t)x; |
| // Don't need to invalidate 2 words here in the 64-bit case, |
| // because the flush instruction operates on doublewords. |
| ICache::invalidate_word(addr); |
| // The Intel code has this assertion for NativeCall::set_destination, |
| // NativeMovConstReg::set_data, NativeMovRegMem::set_offset, |
| // NativeJump::set_jump_destination, and NativePushImm32::set_data |
| //assert (Patching_lock->owned_by_self(), "must hold lock to patch instruction") |
| } |
| |
| bool NativeInstruction::is_zero_test(Register ®) { |
| int x = long_at(0); |
| Assembler::op3s temp = (Assembler::op3s) (Assembler::sub_op3 | Assembler::cc_bit_op3); |
| if (is_op3(x, temp, Assembler::arith_op) && |
| inv_immed(x) && inv_rd(x) == G0) { |
| if (inv_rs1(x) == G0) { |
| reg = inv_rs2(x); |
| return true; |
| } else if (inv_rs2(x) == G0) { |
| reg = inv_rs1(x); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool NativeInstruction::is_load_store_with_small_offset(Register reg) { |
| int x = long_at(0); |
| if (is_op(x, Assembler::ldst_op) && |
| inv_rs1(x) == reg && inv_immed(x)) { |
| return true; |
| } |
| return false; |
| } |
| |
| void NativeCall::verify() { |
| NativeInstruction::verify(); |
| // make sure code pattern is actually a call instruction |
| if (!is_op(long_at(0), Assembler::call_op)) { |
| fatal("not a call"); |
| } |
| } |
| |
| void NativeCall::print() { |
| tty->print_cr(INTPTR_FORMAT ": call " INTPTR_FORMAT, instruction_address(), destination()); |
| } |
| |
| |
| // MT-safe patching of a call instruction (and following word). |
| // First patches the second word, and then atomicly replaces |
| // the first word with the first new instruction word. |
| // Other processors might briefly see the old first word |
| // followed by the new second word. This is OK if the old |
| // second word is harmless, and the new second word may be |
| // harmlessly executed in the delay slot of the call. |
| void NativeCall::replace_mt_safe(address instr_addr, address code_buffer) { |
| assert(Patching_lock->is_locked() || |
| SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); |
| assert (instr_addr != NULL, "illegal address for code patching"); |
| NativeCall* n_call = nativeCall_at (instr_addr); // checking that it is a call |
| assert(NativeCall::instruction_size == 8, "wrong instruction size; must be 8"); |
| int i0 = ((int*)code_buffer)[0]; |
| int i1 = ((int*)code_buffer)[1]; |
| int* contention_addr = (int*) n_call->addr_at(1*BytesPerInstWord); |
| assert(inv_op(*contention_addr) == Assembler::arith_op || |
| *contention_addr == nop_instruction(), |
| "must not interfere with original call"); |
| // The set_long_at calls do the ICacheInvalidate so we just need to do them in reverse order |
| n_call->set_long_at(1*BytesPerInstWord, i1); |
| n_call->set_long_at(0*BytesPerInstWord, i0); |
| // NOTE: It is possible that another thread T will execute |
| // only the second patched word. |
| // In other words, since the original instruction is this |
| // call patching_stub; nop (NativeCall) |
| // and the new sequence from the buffer is this: |
| // sethi %hi(K), %r; add %r, %lo(K), %r (NativeMovConstReg) |
| // what T will execute is this: |
| // call patching_stub; add %r, %lo(K), %r |
| // thereby putting garbage into %r before calling the patching stub. |
| // This is OK, because the patching stub ignores the value of %r. |
| |
| // Make sure the first-patched instruction, which may co-exist |
| // briefly with the call, will do something harmless. |
| assert(inv_op(*contention_addr) == Assembler::arith_op || |
| *contention_addr == nop_instruction(), |
| "must not interfere with original call"); |
| } |
| |
| // Similar to replace_mt_safe, but just changes the destination. The |
| // important thing is that free-running threads are able to execute this |
| // call instruction at all times. Thus, the displacement field must be |
| // instruction-word-aligned. This is always true on SPARC. |
| // |
| // Used in the runtime linkage of calls; see class CompiledIC. |
| void NativeCall::set_destination_mt_safe(address dest) { |
| assert(Patching_lock->is_locked() || |
| SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); |
| // set_destination uses set_long_at which does the ICache::invalidate |
| set_destination(dest); |
| } |
| |
| // Code for unit testing implementation of NativeCall class |
| void NativeCall::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 100, 100); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeCall *nc; |
| uint idx; |
| int offsets[] = { |
| 0x0, |
| 0xfffffff0, |
| 0x7ffffff0, |
| 0x80000000, |
| 0x20, |
| 0x4000, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| a->call( a->pc(), relocInfo::none ); |
| a->delayed()->nop(); |
| nc = nativeCall_at( cb.insts_begin() ); |
| nc->print(); |
| |
| nc = nativeCall_overwriting_at( nc->next_instruction_address() ); |
| for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) { |
| nc->set_destination( cb.insts_begin() + offsets[idx] ); |
| assert(nc->destination() == (cb.insts_begin() + offsets[idx]), "check unit test"); |
| nc->print(); |
| } |
| |
| nc = nativeCall_before( cb.insts_begin() + 8 ); |
| nc->print(); |
| |
| VM_Version::revert(); |
| #endif |
| } |
| // End code for unit testing implementation of NativeCall class |
| |
| //------------------------------------------------------------------- |
| |
| #ifdef _LP64 |
| |
| void NativeFarCall::set_destination(address dest) { |
| // Address materialized in the instruction stream, so nothing to do. |
| return; |
| #if 0 // What we'd do if we really did want to change the destination |
| if (destination() == dest) { |
| return; |
| } |
| ResourceMark rm; |
| CodeBuffer buf(addr_at(0), instruction_size + 1); |
| MacroAssembler* _masm = new MacroAssembler(&buf); |
| // Generate the new sequence |
| AddressLiteral(dest); |
| _masm->jumpl_to(dest, O7, O7); |
| ICache::invalidate_range(addr_at(0), instruction_size ); |
| #endif |
| } |
| |
| void NativeFarCall::verify() { |
| // make sure code pattern is actually a jumpl_to instruction |
| assert((int)instruction_size == (int)NativeJump::instruction_size, "same as jump_to"); |
| assert((int)jmpl_offset == (int)NativeMovConstReg::add_offset, "sethi size ok"); |
| nativeJump_at(addr_at(0))->verify(); |
| } |
| |
| bool NativeFarCall::is_call_at(address instr) { |
| return nativeInstruction_at(instr)->is_sethi(); |
| } |
| |
| void NativeFarCall::print() { |
| tty->print_cr(INTPTR_FORMAT ": call " INTPTR_FORMAT, instruction_address(), destination()); |
| } |
| |
| bool NativeFarCall::destination_is_compiled_verified_entry_point() { |
| nmethod* callee = CodeCache::find_nmethod(destination()); |
| if (callee == NULL) { |
| return false; |
| } else { |
| return destination() == callee->verified_entry_point(); |
| } |
| } |
| |
| // MT-safe patching of a far call. |
| void NativeFarCall::replace_mt_safe(address instr_addr, address code_buffer) { |
| Unimplemented(); |
| } |
| |
| // Code for unit testing implementation of NativeFarCall class |
| void NativeFarCall::test() { |
| Unimplemented(); |
| } |
| // End code for unit testing implementation of NativeFarCall class |
| |
| #endif // _LP64 |
| |
| //------------------------------------------------------------------- |
| |
| |
| void NativeMovConstReg::verify() { |
| NativeInstruction::verify(); |
| // make sure code pattern is actually a "set_metadata" synthetic instruction |
| // see MacroAssembler::set_oop() |
| int i0 = long_at(sethi_offset); |
| int i1 = long_at(add_offset); |
| |
| // verify the pattern "sethi %hi22(imm), reg ; add reg, %lo10(imm), reg" |
| Register rd = inv_rd(i0); |
| #ifndef _LP64 |
| if (!(is_op2(i0, Assembler::sethi_op2) && rd != G0 && |
| is_op3(i1, Assembler::add_op3, Assembler::arith_op) && |
| inv_immed(i1) && (unsigned)get_simm13(i1) < (1 << 10) && |
| rd == inv_rs1(i1) && rd == inv_rd(i1))) { |
| fatal("not a set_metadata"); |
| } |
| #else |
| if (!is_op2(i0, Assembler::sethi_op2) && rd != G0 ) { |
| fatal("not a set_metadata"); |
| } |
| #endif |
| } |
| |
| |
| void NativeMovConstReg::print() { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data()); |
| } |
| |
| |
| #ifdef _LP64 |
| intptr_t NativeMovConstReg::data() const { |
| return data64(addr_at(sethi_offset), long_at(add_offset)); |
| } |
| #else |
| intptr_t NativeMovConstReg::data() const { |
| return data32(long_at(sethi_offset), long_at(add_offset)); |
| } |
| #endif |
| |
| |
| void NativeMovConstReg::set_data(intptr_t x) { |
| #ifdef _LP64 |
| set_data64_sethi(addr_at(sethi_offset), x); |
| #else |
| set_long_at(sethi_offset, set_data32_sethi( long_at(sethi_offset), x)); |
| #endif |
| set_long_at(add_offset, set_data32_simm13( long_at(add_offset), x)); |
| |
| // also store the value into an oop_Relocation cell, if any |
| CodeBlob* cb = CodeCache::find_blob(instruction_address()); |
| nmethod* nm = cb ? cb->as_nmethod_or_null() : NULL; |
| if (nm != NULL) { |
| RelocIterator iter(nm, instruction_address(), next_instruction_address()); |
| oop* oop_addr = NULL; |
| Metadata** metadata_addr = NULL; |
| while (iter.next()) { |
| if (iter.type() == relocInfo::oop_type) { |
| oop_Relocation *r = iter.oop_reloc(); |
| if (oop_addr == NULL) { |
| oop_addr = r->oop_addr(); |
| *oop_addr = cast_to_oop(x); |
| } else { |
| assert(oop_addr == r->oop_addr(), "must be only one set-oop here"); |
| } |
| } |
| if (iter.type() == relocInfo::metadata_type) { |
| metadata_Relocation *r = iter.metadata_reloc(); |
| if (metadata_addr == NULL) { |
| metadata_addr = r->metadata_addr(); |
| *metadata_addr = (Metadata*)x; |
| } else { |
| assert(metadata_addr == r->metadata_addr(), "must be only one set-metadata here"); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| // Code for unit testing implementation of NativeMovConstReg class |
| void NativeMovConstReg::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 100, 100); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeMovConstReg* nm; |
| uint idx; |
| int offsets[] = { |
| 0x0, |
| 0x7fffffff, |
| 0x80000000, |
| 0xffffffff, |
| 0x20, |
| 4096, |
| 4097, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| AddressLiteral al1(0xaaaabbbb, relocInfo::external_word_type); |
| a->sethi(al1, I3); |
| a->add(I3, al1.low10(), I3); |
| AddressLiteral al2(0xccccdddd, relocInfo::external_word_type); |
| a->sethi(al2, O2); |
| a->add(O2, al2.low10(), O2); |
| |
| nm = nativeMovConstReg_at( cb.insts_begin() ); |
| nm->print(); |
| |
| nm = nativeMovConstReg_at( nm->next_instruction_address() ); |
| for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) { |
| nm->set_data( offsets[idx] ); |
| assert(nm->data() == offsets[idx], "check unit test"); |
| } |
| nm->print(); |
| |
| VM_Version::revert(); |
| #endif |
| } |
| // End code for unit testing implementation of NativeMovConstReg class |
| |
| //------------------------------------------------------------------- |
| |
| void NativeMovConstRegPatching::verify() { |
| NativeInstruction::verify(); |
| // Make sure code pattern is sethi/nop/add. |
| int i0 = long_at(sethi_offset); |
| int i1 = long_at(nop_offset); |
| int i2 = long_at(add_offset); |
| assert((int)nop_offset == (int)NativeMovConstReg::add_offset, "sethi size ok"); |
| |
| // Verify the pattern "sethi %hi22(imm), reg; nop; add reg, %lo10(imm), reg" |
| // The casual reader should note that on Sparc a nop is a special case if sethi |
| // in which the destination register is %g0. |
| Register rd0 = inv_rd(i0); |
| Register rd1 = inv_rd(i1); |
| if (!(is_op2(i0, Assembler::sethi_op2) && rd0 != G0 && |
| is_op2(i1, Assembler::sethi_op2) && rd1 == G0 && // nop is a special case of sethi |
| is_op3(i2, Assembler::add_op3, Assembler::arith_op) && |
| inv_immed(i2) && (unsigned)get_simm13(i2) < (1 << 10) && |
| rd0 == inv_rs1(i2) && rd0 == inv_rd(i2))) { |
| fatal("not a set_metadata"); |
| } |
| } |
| |
| |
| void NativeMovConstRegPatching::print() { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data()); |
| } |
| |
| |
| int NativeMovConstRegPatching::data() const { |
| #ifdef _LP64 |
| return data64(addr_at(sethi_offset), long_at(add_offset)); |
| #else |
| return data32(long_at(sethi_offset), long_at(add_offset)); |
| #endif |
| } |
| |
| |
| void NativeMovConstRegPatching::set_data(int x) { |
| #ifdef _LP64 |
| set_data64_sethi(addr_at(sethi_offset), x); |
| #else |
| set_long_at(sethi_offset, set_data32_sethi(long_at(sethi_offset), x)); |
| #endif |
| set_long_at(add_offset, set_data32_simm13(long_at(add_offset), x)); |
| |
| // also store the value into an oop_Relocation cell, if any |
| CodeBlob* cb = CodeCache::find_blob(instruction_address()); |
| nmethod* nm = cb ? cb->as_nmethod_or_null() : NULL; |
| if (nm != NULL) { |
| RelocIterator iter(nm, instruction_address(), next_instruction_address()); |
| oop* oop_addr = NULL; |
| Metadata** metadata_addr = NULL; |
| while (iter.next()) { |
| if (iter.type() == relocInfo::oop_type) { |
| oop_Relocation *r = iter.oop_reloc(); |
| if (oop_addr == NULL) { |
| oop_addr = r->oop_addr(); |
| *oop_addr = cast_to_oop(x); |
| } else { |
| assert(oop_addr == r->oop_addr(), "must be only one set-oop here"); |
| } |
| } |
| if (iter.type() == relocInfo::metadata_type) { |
| metadata_Relocation *r = iter.metadata_reloc(); |
| if (metadata_addr == NULL) { |
| metadata_addr = r->metadata_addr(); |
| *metadata_addr = (Metadata*)x; |
| } else { |
| assert(metadata_addr == r->metadata_addr(), "must be only one set-metadata here"); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| // Code for unit testing implementation of NativeMovConstRegPatching class |
| void NativeMovConstRegPatching::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 100, 100); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeMovConstRegPatching* nm; |
| uint idx; |
| int offsets[] = { |
| 0x0, |
| 0x7fffffff, |
| 0x80000000, |
| 0xffffffff, |
| 0x20, |
| 4096, |
| 4097, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| AddressLiteral al1(0xaaaabbbb, relocInfo::external_word_type); |
| a->sethi(al1, I3); |
| a->nop(); |
| a->add(I3, al1.low10(), I3); |
| AddressLiteral al2(0xccccdddd, relocInfo::external_word_type); |
| a->sethi(al2, O2); |
| a->nop(); |
| a->add(O2, al2.low10(), O2); |
| |
| nm = nativeMovConstRegPatching_at( cb.insts_begin() ); |
| nm->print(); |
| |
| nm = nativeMovConstRegPatching_at( nm->next_instruction_address() ); |
| for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) { |
| nm->set_data( offsets[idx] ); |
| assert(nm->data() == offsets[idx], "check unit test"); |
| } |
| nm->print(); |
| |
| VM_Version::revert(); |
| #endif // ASSERT |
| } |
| // End code for unit testing implementation of NativeMovConstRegPatching class |
| |
| |
| //------------------------------------------------------------------- |
| |
| |
| void NativeMovRegMem::copy_instruction_to(address new_instruction_address) { |
| Untested("copy_instruction_to"); |
| int instruction_size = next_instruction_address() - instruction_address(); |
| for (int i = 0; i < instruction_size; i += BytesPerInstWord) { |
| *(int*)(new_instruction_address + i) = *(int*)(address(this) + i); |
| } |
| } |
| |
| |
| void NativeMovRegMem::verify() { |
| NativeInstruction::verify(); |
| // make sure code pattern is actually a "ld" or "st" of some sort. |
| int i0 = long_at(0); |
| int op3 = inv_op3(i0); |
| |
| assert((int)add_offset == NativeMovConstReg::add_offset, "sethi size ok"); |
| |
| if (!(is_op(i0, Assembler::ldst_op) && |
| inv_immed(i0) && |
| 0 != (op3 < op3_ldst_int_limit |
| ? (1 << op3 ) & (op3_mask_ld | op3_mask_st) |
| : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf)))) |
| { |
| int i1 = long_at(ldst_offset); |
| Register rd = inv_rd(i0); |
| |
| op3 = inv_op3(i1); |
| if (!is_op(i1, Assembler::ldst_op) && rd == inv_rs2(i1) && |
| 0 != (op3 < op3_ldst_int_limit |
| ? (1 << op3 ) & (op3_mask_ld | op3_mask_st) |
| : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf))) { |
| fatal("not a ld* or st* op"); |
| } |
| } |
| } |
| |
| |
| void NativeMovRegMem::print() { |
| if (is_immediate()) { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + %x]", instruction_address(), offset()); |
| } else { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + reg]", instruction_address()); |
| } |
| } |
| |
| |
| // Code for unit testing implementation of NativeMovRegMem class |
| void NativeMovRegMem::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 1000, 1000); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeMovRegMem* nm; |
| uint idx = 0; |
| uint idx1; |
| int offsets[] = { |
| 0x0, |
| 0xffffffff, |
| 0x7fffffff, |
| 0x80000000, |
| 4096, |
| 4097, |
| 0x20, |
| 0x4000, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| AddressLiteral al1(0xffffffff, relocInfo::external_word_type); |
| AddressLiteral al2(0xaaaabbbb, relocInfo::external_word_type); |
| a->ldsw( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldsw( G5, I3, G4 ); idx++; |
| a->ldsb( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldsb( G5, I3, G4 ); idx++; |
| a->ldsh( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldsh( G5, I3, G4 ); idx++; |
| a->lduw( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->lduw( G5, I3, G4 ); idx++; |
| a->ldub( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldub( G5, I3, G4 ); idx++; |
| a->lduh( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->lduh( G5, I3, G4 ); idx++; |
| a->ldx( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldx( G5, I3, G4 ); idx++; |
| a->ldd( G5, al1.low10(), G4 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldd( G5, I3, G4 ); idx++; |
| a->ldf( FloatRegisterImpl::D, O2, -1, F14 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->ldf( FloatRegisterImpl::S, O0, I3, F15 ); idx++; |
| |
| a->stw( G5, G4, al1.low10() ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->stw( G5, G4, I3 ); idx++; |
| a->stb( G5, G4, al1.low10() ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->stb( G5, G4, I3 ); idx++; |
| a->sth( G5, G4, al1.low10() ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->sth( G5, G4, I3 ); idx++; |
| a->stx( G5, G4, al1.low10() ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->stx( G5, G4, I3 ); idx++; |
| a->std( G5, G4, al1.low10() ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->std( G5, G4, I3 ); idx++; |
| a->stf( FloatRegisterImpl::S, F18, O2, -1 ); idx++; |
| a->sethi(al2, I3); a->add(I3, al2.low10(), I3); |
| a->stf( FloatRegisterImpl::S, F15, O0, I3 ); idx++; |
| |
| nm = nativeMovRegMem_at( cb.insts_begin() ); |
| nm->print(); |
| nm->set_offset( low10(0) ); |
| nm->print(); |
| nm->add_offset_in_bytes( low10(0xbb) * wordSize ); |
| nm->print(); |
| |
| while (--idx) { |
| nm = nativeMovRegMem_at( nm->next_instruction_address() ); |
| nm->print(); |
| for (idx1 = 0; idx1 < ARRAY_SIZE(offsets); idx1++) { |
| nm->set_offset( nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1] ); |
| assert(nm->offset() == (nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1]), |
| "check unit test"); |
| nm->print(); |
| } |
| nm->add_offset_in_bytes( low10(0xbb) * wordSize ); |
| nm->print(); |
| } |
| |
| VM_Version::revert(); |
| #endif // ASSERT |
| } |
| |
| // End code for unit testing implementation of NativeMovRegMem class |
| |
| //-------------------------------------------------------------------------------- |
| |
| |
| void NativeMovRegMemPatching::copy_instruction_to(address new_instruction_address) { |
| Untested("copy_instruction_to"); |
| int instruction_size = next_instruction_address() - instruction_address(); |
| for (int i = 0; i < instruction_size; i += wordSize) { |
| *(long*)(new_instruction_address + i) = *(long*)(address(this) + i); |
| } |
| } |
| |
| |
| void NativeMovRegMemPatching::verify() { |
| NativeInstruction::verify(); |
| // make sure code pattern is actually a "ld" or "st" of some sort. |
| int i0 = long_at(0); |
| int op3 = inv_op3(i0); |
| |
| assert((int)nop_offset == (int)NativeMovConstReg::add_offset, "sethi size ok"); |
| |
| if (!(is_op(i0, Assembler::ldst_op) && |
| inv_immed(i0) && |
| 0 != (op3 < op3_ldst_int_limit |
| ? (1 << op3 ) & (op3_mask_ld | op3_mask_st) |
| : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf)))) { |
| int i1 = long_at(ldst_offset); |
| Register rd = inv_rd(i0); |
| |
| op3 = inv_op3(i1); |
| if (!is_op(i1, Assembler::ldst_op) && rd == inv_rs2(i1) && |
| 0 != (op3 < op3_ldst_int_limit |
| ? (1 << op3 ) & (op3_mask_ld | op3_mask_st) |
| : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf))) { |
| fatal("not a ld* or st* op"); |
| } |
| } |
| } |
| |
| |
| void NativeMovRegMemPatching::print() { |
| if (is_immediate()) { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + %x]", instruction_address(), offset()); |
| } else { |
| tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + reg]", instruction_address()); |
| } |
| } |
| |
| |
| // Code for unit testing implementation of NativeMovRegMemPatching class |
| void NativeMovRegMemPatching::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 1000, 1000); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeMovRegMemPatching* nm; |
| uint idx = 0; |
| uint idx1; |
| int offsets[] = { |
| 0x0, |
| 0xffffffff, |
| 0x7fffffff, |
| 0x80000000, |
| 4096, |
| 4097, |
| 0x20, |
| 0x4000, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| AddressLiteral al(0xffffffff, relocInfo::external_word_type); |
| a->ldsw( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldsw( G5, I3, G4 ); idx++; |
| a->ldsb( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldsb( G5, I3, G4 ); idx++; |
| a->ldsh( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldsh( G5, I3, G4 ); idx++; |
| a->lduw( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->lduw( G5, I3, G4 ); idx++; |
| a->ldub( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldub( G5, I3, G4 ); idx++; |
| a->lduh( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->lduh( G5, I3, G4 ); idx++; |
| a->ldx( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldx( G5, I3, G4 ); idx++; |
| a->ldd( G5, al.low10(), G4); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldd( G5, I3, G4 ); idx++; |
| a->ldf( FloatRegisterImpl::D, O2, -1, F14 ); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->ldf( FloatRegisterImpl::S, O0, I3, F15 ); idx++; |
| |
| a->stw( G5, G4, al.low10()); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->stw( G5, G4, I3 ); idx++; |
| a->stb( G5, G4, al.low10()); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->stb( G5, G4, I3 ); idx++; |
| a->sth( G5, G4, al.low10()); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->sth( G5, G4, I3 ); idx++; |
| a->stx( G5, G4, al.low10()); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->stx( G5, G4, I3 ); idx++; |
| a->std( G5, G4, al.low10()); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->std( G5, G4, I3 ); idx++; |
| a->stf( FloatRegisterImpl::S, F18, O2, -1 ); idx++; |
| a->sethi(al, I3); a->nop(); a->add(I3, al.low10(), I3); |
| a->stf( FloatRegisterImpl::S, F15, O0, I3 ); idx++; |
| |
| nm = nativeMovRegMemPatching_at( cb.insts_begin() ); |
| nm->print(); |
| nm->set_offset( low10(0) ); |
| nm->print(); |
| nm->add_offset_in_bytes( low10(0xbb) * wordSize ); |
| nm->print(); |
| |
| while (--idx) { |
| nm = nativeMovRegMemPatching_at( nm->next_instruction_address() ); |
| nm->print(); |
| for (idx1 = 0; idx1 < ARRAY_SIZE(offsets); idx1++) { |
| nm->set_offset( nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1] ); |
| assert(nm->offset() == (nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1]), |
| "check unit test"); |
| nm->print(); |
| } |
| nm->add_offset_in_bytes( low10(0xbb) * wordSize ); |
| nm->print(); |
| } |
| |
| VM_Version::revert(); |
| #endif // ASSERT |
| } |
| // End code for unit testing implementation of NativeMovRegMemPatching class |
| |
| |
| //-------------------------------------------------------------------------------- |
| |
| |
| void NativeJump::verify() { |
| NativeInstruction::verify(); |
| int i0 = long_at(sethi_offset); |
| int i1 = long_at(jmpl_offset); |
| assert((int)jmpl_offset == (int)NativeMovConstReg::add_offset, "sethi size ok"); |
| // verify the pattern "sethi %hi22(imm), treg ; jmpl treg, %lo10(imm), lreg" |
| Register rd = inv_rd(i0); |
| #ifndef _LP64 |
| if (!(is_op2(i0, Assembler::sethi_op2) && rd != G0 && |
| (is_op3(i1, Assembler::jmpl_op3, Assembler::arith_op) || |
| (TraceJumps && is_op3(i1, Assembler::add_op3, Assembler::arith_op))) && |
| inv_immed(i1) && (unsigned)get_simm13(i1) < (1 << 10) && |
| rd == inv_rs1(i1))) { |
| fatal("not a jump_to instruction"); |
| } |
| #else |
| // In LP64, the jump instruction location varies for non relocatable |
| // jumps, for example is could be sethi, xor, jmp instead of the |
| // 7 instructions for sethi. So let's check sethi only. |
| if (!is_op2(i0, Assembler::sethi_op2) && rd != G0 ) { |
| fatal("not a jump_to instruction"); |
| } |
| #endif |
| } |
| |
| |
| void NativeJump::print() { |
| tty->print_cr(INTPTR_FORMAT ": jmpl reg, " INTPTR_FORMAT, instruction_address(), jump_destination()); |
| } |
| |
| |
| // Code for unit testing implementation of NativeJump class |
| void NativeJump::test() { |
| #ifdef ASSERT |
| ResourceMark rm; |
| CodeBuffer cb("test", 100, 100); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| NativeJump* nj; |
| uint idx; |
| int offsets[] = { |
| 0x0, |
| 0xffffffff, |
| 0x7fffffff, |
| 0x80000000, |
| 4096, |
| 4097, |
| 0x20, |
| 0x4000, |
| }; |
| |
| VM_Version::allow_all(); |
| |
| AddressLiteral al(0x7fffbbbb, relocInfo::external_word_type); |
| a->sethi(al, I3); |
| a->jmpl(I3, al.low10(), G0, RelocationHolder::none); |
| a->delayed()->nop(); |
| a->sethi(al, I3); |
| a->jmpl(I3, al.low10(), L3, RelocationHolder::none); |
| a->delayed()->nop(); |
| |
| nj = nativeJump_at( cb.insts_begin() ); |
| nj->print(); |
| |
| nj = nativeJump_at( nj->next_instruction_address() ); |
| for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) { |
| nj->set_jump_destination( nj->instruction_address() + offsets[idx] ); |
| assert(nj->jump_destination() == (nj->instruction_address() + offsets[idx]), "check unit test"); |
| nj->print(); |
| } |
| |
| VM_Version::revert(); |
| #endif // ASSERT |
| } |
| // End code for unit testing implementation of NativeJump class |
| |
| |
| void NativeJump::insert(address code_pos, address entry) { |
| Unimplemented(); |
| } |
| |
| // MT safe inserting of a jump over an unknown instruction sequence (used by nmethod::makeZombie) |
| // The problem: jump_to <dest> is a 3-word instruction (including its delay slot). |
| // Atomic write can be only with 1 word. |
| void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) { |
| // Here's one way to do it: Pre-allocate a three-word jump sequence somewhere |
| // in the header of the nmethod, within a short branch's span of the patch point. |
| // Set up the jump sequence using NativeJump::insert, and then use an annulled |
| // unconditional branch at the target site (an atomic 1-word update). |
| // Limitations: You can only patch nmethods, with any given nmethod patched at |
| // most once, and the patch must be in the nmethod's header. |
| // It's messy, but you can ask the CodeCache for the nmethod containing the |
| // target address. |
| |
| // %%%%% For now, do something MT-stupid: |
| ResourceMark rm; |
| int code_size = 1 * BytesPerInstWord; |
| CodeBuffer cb(verified_entry, code_size + 1); |
| MacroAssembler* a = new MacroAssembler(&cb); |
| a->ldsw(G0, 0, O7); // "ld" must agree with code in the signal handler |
| ICache::invalidate_range(verified_entry, code_size); |
| } |
| |
| |
| void NativeIllegalInstruction::insert(address code_pos) { |
| NativeIllegalInstruction* nii = (NativeIllegalInstruction*) nativeInstruction_at(code_pos); |
| nii->set_long_at(0, illegal_instruction()); |
| } |
| |
| static int illegal_instruction_bits = 0; |
| |
| int NativeInstruction::illegal_instruction() { |
| if (illegal_instruction_bits == 0) { |
| ResourceMark rm; |
| char buf[40]; |
| CodeBuffer cbuf((address)&buf[0], 20); |
| MacroAssembler* a = new MacroAssembler(&cbuf); |
| address ia = a->pc(); |
| a->trap(ST_RESERVED_FOR_USER_0 + 1); |
| int bits = *(int*)ia; |
| assert(is_op3(bits, Assembler::trap_op3, Assembler::arith_op), "bad instruction"); |
| illegal_instruction_bits = bits; |
| assert(illegal_instruction_bits != 0, "oops"); |
| } |
| return illegal_instruction_bits; |
| } |
| |
| static int ic_miss_trap_bits = 0; |
| |
| bool NativeInstruction::is_ic_miss_trap() { |
| if (ic_miss_trap_bits == 0) { |
| ResourceMark rm; |
| char buf[40]; |
| CodeBuffer cbuf((address)&buf[0], 20); |
| MacroAssembler* a = new MacroAssembler(&cbuf); |
| address ia = a->pc(); |
| a->trap(Assembler::notEqual, Assembler::ptr_cc, G0, ST_RESERVED_FOR_USER_0 + 2); |
| int bits = *(int*)ia; |
| assert(is_op3(bits, Assembler::trap_op3, Assembler::arith_op), "bad instruction"); |
| ic_miss_trap_bits = bits; |
| assert(ic_miss_trap_bits != 0, "oops"); |
| } |
| return long_at(0) == ic_miss_trap_bits; |
| } |
| |
| |
| bool NativeInstruction::is_illegal() { |
| if (illegal_instruction_bits == 0) { |
| return false; |
| } |
| return long_at(0) == illegal_instruction_bits; |
| } |
| |
| |
| void NativeGeneralJump::verify() { |
| assert(((NativeInstruction *)this)->is_jump() || |
| ((NativeInstruction *)this)->is_cond_jump(), "not a general jump instruction"); |
| } |
| |
| |
| void NativeGeneralJump::insert_unconditional(address code_pos, address entry) { |
| Assembler::Condition condition = Assembler::always; |
| int x = Assembler::op2(Assembler::br_op2) | Assembler::annul(false) | |
| Assembler::cond(condition) | Assembler::wdisp((intptr_t)entry, (intptr_t)code_pos, 22); |
| NativeGeneralJump* ni = (NativeGeneralJump*) nativeInstruction_at(code_pos); |
| ni->set_long_at(0, x); |
| } |
| |
| |
| // MT-safe patching of a jmp instruction (and following word). |
| // First patches the second word, and then atomicly replaces |
| // the first word with the first new instruction word. |
| // Other processors might briefly see the old first word |
| // followed by the new second word. This is OK if the old |
| // second word is harmless, and the new second word may be |
| // harmlessly executed in the delay slot of the call. |
| void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) { |
| assert(Patching_lock->is_locked() || |
| SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); |
| assert (instr_addr != NULL, "illegal address for code patching"); |
| NativeGeneralJump* h_jump = nativeGeneralJump_at (instr_addr); // checking that it is a call |
| assert(NativeGeneralJump::instruction_size == 8, "wrong instruction size; must be 8"); |
| int i0 = ((int*)code_buffer)[0]; |
| int i1 = ((int*)code_buffer)[1]; |
| int* contention_addr = (int*) h_jump->addr_at(1*BytesPerInstWord); |
| assert(inv_op(*contention_addr) == Assembler::arith_op || |
| *contention_addr == nop_instruction(), |
| "must not interfere with original call"); |
| // The set_long_at calls do the ICacheInvalidate so we just need to do them in reverse order |
| h_jump->set_long_at(1*BytesPerInstWord, i1); |
| h_jump->set_long_at(0*BytesPerInstWord, i0); |
| // NOTE: It is possible that another thread T will execute |
| // only the second patched word. |
| // In other words, since the original instruction is this |
| // jmp patching_stub; nop (NativeGeneralJump) |
| // and the new sequence from the buffer is this: |
| // sethi %hi(K), %r; add %r, %lo(K), %r (NativeMovConstReg) |
| // what T will execute is this: |
| // jmp patching_stub; add %r, %lo(K), %r |
| // thereby putting garbage into %r before calling the patching stub. |
| // This is OK, because the patching stub ignores the value of %r. |
| |
| // Make sure the first-patched instruction, which may co-exist |
| // briefly with the call, will do something harmless. |
| assert(inv_op(*contention_addr) == Assembler::arith_op || |
| *contention_addr == nop_instruction(), |
| "must not interfere with original call"); |
| } |