| #include "git-compat-util.h" | 
 | #include "http.h" | 
 | #include "pack.h" | 
 | #include "sideband.h" | 
 | #include "run-command.h" | 
 | #include "url.h" | 
 | #include "urlmatch.h" | 
 | #include "credential.h" | 
 | #include "version.h" | 
 | #include "pkt-line.h" | 
 | #include "gettext.h" | 
 | #include "transport.h" | 
 |  | 
 | static struct trace_key trace_curl = TRACE_KEY_INIT(CURL); | 
 | #if LIBCURL_VERSION_NUM >= 0x070a08 | 
 | long int git_curl_ipresolve = CURL_IPRESOLVE_WHATEVER; | 
 | #else | 
 | long int git_curl_ipresolve; | 
 | #endif | 
 | int active_requests; | 
 | int http_is_verbose; | 
 | size_t http_post_buffer = 16 * LARGE_PACKET_MAX; | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x070a06 | 
 | #define LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | #endif | 
 |  | 
 | static int min_curl_sessions = 1; | 
 | static int curl_session_count; | 
 | #ifdef USE_CURL_MULTI | 
 | static int max_requests = -1; | 
 | static CURLM *curlm; | 
 | #endif | 
 | #ifndef NO_CURL_EASY_DUPHANDLE | 
 | static CURL *curl_default; | 
 | #endif | 
 |  | 
 | #define PREV_BUF_SIZE 4096 | 
 |  | 
 | char curl_errorstr[CURL_ERROR_SIZE]; | 
 |  | 
 | static int curl_ssl_verify = -1; | 
 | static int curl_ssl_try; | 
 | static const char *ssl_cert; | 
 | static const char *ssl_cipherlist; | 
 | static const char *ssl_version; | 
 | static struct { | 
 | 	const char *name; | 
 | 	long ssl_version; | 
 | } sslversions[] = { | 
 | 	{ "sslv2", CURL_SSLVERSION_SSLv2 }, | 
 | 	{ "sslv3", CURL_SSLVERSION_SSLv3 }, | 
 | 	{ "tlsv1", CURL_SSLVERSION_TLSv1 }, | 
 | #if LIBCURL_VERSION_NUM >= 0x072200 | 
 | 	{ "tlsv1.0", CURL_SSLVERSION_TLSv1_0 }, | 
 | 	{ "tlsv1.1", CURL_SSLVERSION_TLSv1_1 }, | 
 | 	{ "tlsv1.2", CURL_SSLVERSION_TLSv1_2 }, | 
 | #endif | 
 | }; | 
 | #if LIBCURL_VERSION_NUM >= 0x070903 | 
 | static const char *ssl_key; | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x070908 | 
 | static const char *ssl_capath; | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x072c00 | 
 | static const char *ssl_pinnedkey; | 
 | #endif | 
 | static const char *ssl_cainfo; | 
 | static long curl_low_speed_limit = -1; | 
 | static long curl_low_speed_time = -1; | 
 | static int curl_ftp_no_epsv; | 
 | static const char *curl_http_proxy; | 
 | static const char *curl_no_proxy; | 
 | static const char *http_proxy_authmethod; | 
 | static struct { | 
 | 	const char *name; | 
 | 	long curlauth_param; | 
 | } proxy_authmethods[] = { | 
 | 	{ "basic", CURLAUTH_BASIC }, | 
 | 	{ "digest", CURLAUTH_DIGEST }, | 
 | 	{ "negotiate", CURLAUTH_GSSNEGOTIATE }, | 
 | 	{ "ntlm", CURLAUTH_NTLM }, | 
 | #ifdef LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | 	{ "anyauth", CURLAUTH_ANY }, | 
 | #endif | 
 | 	/* | 
 | 	 * CURLAUTH_DIGEST_IE has no corresponding command-line option in | 
 | 	 * curl(1) and is not included in CURLAUTH_ANY, so we leave it out | 
 | 	 * here, too | 
 | 	 */ | 
 | }; | 
 | static struct credential proxy_auth = CREDENTIAL_INIT; | 
 | static const char *curl_proxyuserpwd; | 
 | static const char *curl_cookie_file; | 
 | static int curl_save_cookies; | 
 | struct credential http_auth = CREDENTIAL_INIT; | 
 | static int http_proactive_auth; | 
 | static const char *user_agent; | 
 | static int curl_empty_auth; | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x071700 | 
 | /* Use CURLOPT_KEYPASSWD as is */ | 
 | #elif LIBCURL_VERSION_NUM >= 0x070903 | 
 | #define CURLOPT_KEYPASSWD CURLOPT_SSLKEYPASSWD | 
 | #else | 
 | #define CURLOPT_KEYPASSWD CURLOPT_SSLCERTPASSWD | 
 | #endif | 
 |  | 
 | static struct credential cert_auth = CREDENTIAL_INIT; | 
 | static int ssl_cert_password_required; | 
 | #ifdef LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | static unsigned long http_auth_methods = CURLAUTH_ANY; | 
 | #endif | 
 |  | 
 | static struct curl_slist *pragma_header; | 
 | static struct curl_slist *no_pragma_header; | 
 | static struct curl_slist *extra_http_headers; | 
 |  | 
 | static struct active_request_slot *active_queue_head; | 
 |  | 
 | static char *cached_accept_language; | 
 |  | 
 | size_t fread_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_) | 
 | { | 
 | 	size_t size = eltsize * nmemb; | 
 | 	struct buffer *buffer = buffer_; | 
 |  | 
 | 	if (size > buffer->buf.len - buffer->posn) | 
 | 		size = buffer->buf.len - buffer->posn; | 
 | 	memcpy(ptr, buffer->buf.buf + buffer->posn, size); | 
 | 	buffer->posn += size; | 
 |  | 
 | 	return size; | 
 | } | 
 |  | 
 | #ifndef NO_CURL_IOCTL | 
 | curlioerr ioctl_buffer(CURL *handle, int cmd, void *clientp) | 
 | { | 
 | 	struct buffer *buffer = clientp; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case CURLIOCMD_NOP: | 
 | 		return CURLIOE_OK; | 
 |  | 
 | 	case CURLIOCMD_RESTARTREAD: | 
 | 		buffer->posn = 0; | 
 | 		return CURLIOE_OK; | 
 |  | 
 | 	default: | 
 | 		return CURLIOE_UNKNOWNCMD; | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | size_t fwrite_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_) | 
 | { | 
 | 	size_t size = eltsize * nmemb; | 
 | 	struct strbuf *buffer = buffer_; | 
 |  | 
 | 	strbuf_add(buffer, ptr, size); | 
 | 	return size; | 
 | } | 
 |  | 
 | size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf) | 
 | { | 
 | 	return eltsize * nmemb; | 
 | } | 
 |  | 
 | static void closedown_active_slot(struct active_request_slot *slot) | 
 | { | 
 | 	active_requests--; | 
 | 	slot->in_use = 0; | 
 | } | 
 |  | 
 | static void finish_active_slot(struct active_request_slot *slot) | 
 | { | 
 | 	closedown_active_slot(slot); | 
 | 	curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CODE, &slot->http_code); | 
 |  | 
 | 	if (slot->finished != NULL) | 
 | 		(*slot->finished) = 1; | 
 |  | 
 | 	/* Store slot results so they can be read after the slot is reused */ | 
 | 	if (slot->results != NULL) { | 
 | 		slot->results->curl_result = slot->curl_result; | 
 | 		slot->results->http_code = slot->http_code; | 
 | #if LIBCURL_VERSION_NUM >= 0x070a08 | 
 | 		curl_easy_getinfo(slot->curl, CURLINFO_HTTPAUTH_AVAIL, | 
 | 				  &slot->results->auth_avail); | 
 | #else | 
 | 		slot->results->auth_avail = 0; | 
 | #endif | 
 |  | 
 | 		curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CONNECTCODE, | 
 | 			&slot->results->http_connectcode); | 
 | 	} | 
 |  | 
 | 	/* Run callback if appropriate */ | 
 | 	if (slot->callback_func != NULL) | 
 | 		slot->callback_func(slot->callback_data); | 
 | } | 
 |  | 
 | #ifdef USE_CURL_MULTI | 
 | static void process_curl_messages(void) | 
 | { | 
 | 	int num_messages; | 
 | 	struct active_request_slot *slot; | 
 | 	CURLMsg *curl_message = curl_multi_info_read(curlm, &num_messages); | 
 |  | 
 | 	while (curl_message != NULL) { | 
 | 		if (curl_message->msg == CURLMSG_DONE) { | 
 | 			int curl_result = curl_message->data.result; | 
 | 			slot = active_queue_head; | 
 | 			while (slot != NULL && | 
 | 			       slot->curl != curl_message->easy_handle) | 
 | 				slot = slot->next; | 
 | 			if (slot != NULL) { | 
 | 				curl_multi_remove_handle(curlm, slot->curl); | 
 | 				slot->curl_result = curl_result; | 
 | 				finish_active_slot(slot); | 
 | 			} else { | 
 | 				fprintf(stderr, "Received DONE message for unknown request!\n"); | 
 | 			} | 
 | 		} else { | 
 | 			fprintf(stderr, "Unknown CURL message received: %d\n", | 
 | 				(int)curl_message->msg); | 
 | 		} | 
 | 		curl_message = curl_multi_info_read(curlm, &num_messages); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | static int http_options(const char *var, const char *value, void *cb) | 
 | { | 
 | 	if (!strcmp("http.sslverify", var)) { | 
 | 		curl_ssl_verify = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!strcmp("http.sslcipherlist", var)) | 
 | 		return git_config_string(&ssl_cipherlist, var, value); | 
 | 	if (!strcmp("http.sslversion", var)) | 
 | 		return git_config_string(&ssl_version, var, value); | 
 | 	if (!strcmp("http.sslcert", var)) | 
 | 		return git_config_string(&ssl_cert, var, value); | 
 | #if LIBCURL_VERSION_NUM >= 0x070903 | 
 | 	if (!strcmp("http.sslkey", var)) | 
 | 		return git_config_string(&ssl_key, var, value); | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x070908 | 
 | 	if (!strcmp("http.sslcapath", var)) | 
 | 		return git_config_pathname(&ssl_capath, var, value); | 
 | #endif | 
 | 	if (!strcmp("http.sslcainfo", var)) | 
 | 		return git_config_pathname(&ssl_cainfo, var, value); | 
 | 	if (!strcmp("http.sslcertpasswordprotected", var)) { | 
 | 		ssl_cert_password_required = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!strcmp("http.ssltry", var)) { | 
 | 		curl_ssl_try = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!strcmp("http.minsessions", var)) { | 
 | 		min_curl_sessions = git_config_int(var, value); | 
 | #ifndef USE_CURL_MULTI | 
 | 		if (min_curl_sessions > 1) | 
 | 			min_curl_sessions = 1; | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | #ifdef USE_CURL_MULTI | 
 | 	if (!strcmp("http.maxrequests", var)) { | 
 | 		max_requests = git_config_int(var, value); | 
 | 		return 0; | 
 | 	} | 
 | #endif | 
 | 	if (!strcmp("http.lowspeedlimit", var)) { | 
 | 		curl_low_speed_limit = (long)git_config_int(var, value); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!strcmp("http.lowspeedtime", var)) { | 
 | 		curl_low_speed_time = (long)git_config_int(var, value); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!strcmp("http.noepsv", var)) { | 
 | 		curl_ftp_no_epsv = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!strcmp("http.proxy", var)) | 
 | 		return git_config_string(&curl_http_proxy, var, value); | 
 |  | 
 | 	if (!strcmp("http.proxyauthmethod", var)) | 
 | 		return git_config_string(&http_proxy_authmethod, var, value); | 
 |  | 
 | 	if (!strcmp("http.cookiefile", var)) | 
 | 		return git_config_pathname(&curl_cookie_file, var, value); | 
 | 	if (!strcmp("http.savecookies", var)) { | 
 | 		curl_save_cookies = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!strcmp("http.postbuffer", var)) { | 
 | 		http_post_buffer = git_config_int(var, value); | 
 | 		if (http_post_buffer < LARGE_PACKET_MAX) | 
 | 			http_post_buffer = LARGE_PACKET_MAX; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!strcmp("http.useragent", var)) | 
 | 		return git_config_string(&user_agent, var, value); | 
 |  | 
 | 	if (!strcmp("http.emptyauth", var)) { | 
 | 		curl_empty_auth = git_config_bool(var, value); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!strcmp("http.pinnedpubkey", var)) { | 
 | #if LIBCURL_VERSION_NUM >= 0x072c00 | 
 | 		return git_config_pathname(&ssl_pinnedkey, var, value); | 
 | #else | 
 | 		warning(_("Public key pinning not supported with cURL < 7.44.0")); | 
 | 		return 0; | 
 | #endif | 
 | 	} | 
 |  | 
 | 	if (!strcmp("http.extraheader", var)) { | 
 | 		if (!value) { | 
 | 			return config_error_nonbool(var); | 
 | 		} else if (!*value) { | 
 | 			curl_slist_free_all(extra_http_headers); | 
 | 			extra_http_headers = NULL; | 
 | 		} else { | 
 | 			extra_http_headers = | 
 | 				curl_slist_append(extra_http_headers, value); | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Fall back on the default ones */ | 
 | 	return git_default_config(var, value, cb); | 
 | } | 
 |  | 
 | static void init_curl_http_auth(CURL *result) | 
 | { | 
 | 	if (!http_auth.username) { | 
 | 		if (curl_empty_auth) | 
 | 			curl_easy_setopt(result, CURLOPT_USERPWD, ":"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	credential_fill(&http_auth); | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x071301 | 
 | 	curl_easy_setopt(result, CURLOPT_USERNAME, http_auth.username); | 
 | 	curl_easy_setopt(result, CURLOPT_PASSWORD, http_auth.password); | 
 | #else | 
 | 	{ | 
 | 		static struct strbuf up = STRBUF_INIT; | 
 | 		/* | 
 | 		 * Note that we assume we only ever have a single set of | 
 | 		 * credentials in a given program run, so we do not have | 
 | 		 * to worry about updating this buffer, only setting its | 
 | 		 * initial value. | 
 | 		 */ | 
 | 		if (!up.len) | 
 | 			strbuf_addf(&up, "%s:%s", | 
 | 				http_auth.username, http_auth.password); | 
 | 		curl_easy_setopt(result, CURLOPT_USERPWD, up.buf); | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | /* *var must be free-able */ | 
 | static void var_override(const char **var, char *value) | 
 | { | 
 | 	if (value) { | 
 | 		free((void *)*var); | 
 | 		*var = xstrdup(value); | 
 | 	} | 
 | } | 
 |  | 
 | static void set_proxyauth_name_password(CURL *result) | 
 | { | 
 | #if LIBCURL_VERSION_NUM >= 0x071301 | 
 | 		curl_easy_setopt(result, CURLOPT_PROXYUSERNAME, | 
 | 			proxy_auth.username); | 
 | 		curl_easy_setopt(result, CURLOPT_PROXYPASSWORD, | 
 | 			proxy_auth.password); | 
 | #else | 
 | 		struct strbuf s = STRBUF_INIT; | 
 |  | 
 | 		strbuf_addstr_urlencode(&s, proxy_auth.username, 1); | 
 | 		strbuf_addch(&s, ':'); | 
 | 		strbuf_addstr_urlencode(&s, proxy_auth.password, 1); | 
 | 		curl_proxyuserpwd = strbuf_detach(&s, NULL); | 
 | 		curl_easy_setopt(result, CURLOPT_PROXYUSERPWD, curl_proxyuserpwd); | 
 | #endif | 
 | } | 
 |  | 
 | static void init_curl_proxy_auth(CURL *result) | 
 | { | 
 | 	if (proxy_auth.username) { | 
 | 		if (!proxy_auth.password) | 
 | 			credential_fill(&proxy_auth); | 
 | 		set_proxyauth_name_password(result); | 
 | 	} | 
 |  | 
 | 	var_override(&http_proxy_authmethod, getenv("GIT_HTTP_PROXY_AUTHMETHOD")); | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x070a07 /* CURLOPT_PROXYAUTH and CURLAUTH_ANY */ | 
 | 	if (http_proxy_authmethod) { | 
 | 		int i; | 
 | 		for (i = 0; i < ARRAY_SIZE(proxy_authmethods); i++) { | 
 | 			if (!strcmp(http_proxy_authmethod, proxy_authmethods[i].name)) { | 
 | 				curl_easy_setopt(result, CURLOPT_PROXYAUTH, | 
 | 						proxy_authmethods[i].curlauth_param); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (i == ARRAY_SIZE(proxy_authmethods)) { | 
 | 			warning("unsupported proxy authentication method %s: using anyauth", | 
 | 					http_proxy_authmethod); | 
 | 			curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY); | 
 | 		} | 
 | 	} | 
 | 	else | 
 | 		curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY); | 
 | #endif | 
 | } | 
 |  | 
 | static int has_cert_password(void) | 
 | { | 
 | 	if (ssl_cert == NULL || ssl_cert_password_required != 1) | 
 | 		return 0; | 
 | 	if (!cert_auth.password) { | 
 | 		cert_auth.protocol = xstrdup("cert"); | 
 | 		cert_auth.username = xstrdup(""); | 
 | 		cert_auth.path = xstrdup(ssl_cert); | 
 | 		credential_fill(&cert_auth); | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x071900 | 
 | static void set_curl_keepalive(CURL *c) | 
 | { | 
 | 	curl_easy_setopt(c, CURLOPT_TCP_KEEPALIVE, 1); | 
 | } | 
 |  | 
 | #elif LIBCURL_VERSION_NUM >= 0x071000 | 
 | static int sockopt_callback(void *client, curl_socket_t fd, curlsocktype type) | 
 | { | 
 | 	int ka = 1; | 
 | 	int rc; | 
 | 	socklen_t len = (socklen_t)sizeof(ka); | 
 |  | 
 | 	if (type != CURLSOCKTYPE_IPCXN) | 
 | 		return 0; | 
 |  | 
 | 	rc = setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, (void *)&ka, len); | 
 | 	if (rc < 0) | 
 | 		warning_errno("unable to set SO_KEEPALIVE on socket"); | 
 |  | 
 | 	return 0; /* CURL_SOCKOPT_OK only exists since curl 7.21.5 */ | 
 | } | 
 |  | 
 | static void set_curl_keepalive(CURL *c) | 
 | { | 
 | 	curl_easy_setopt(c, CURLOPT_SOCKOPTFUNCTION, sockopt_callback); | 
 | } | 
 |  | 
 | #else | 
 | static void set_curl_keepalive(CURL *c) | 
 | { | 
 | 	/* not supported on older curl versions */ | 
 | } | 
 | #endif | 
 |  | 
 | static void redact_sensitive_header(struct strbuf *header) | 
 | { | 
 | 	const char *sensitive_header; | 
 |  | 
 | 	if (skip_prefix(header->buf, "Authorization:", &sensitive_header) || | 
 | 	    skip_prefix(header->buf, "Proxy-Authorization:", &sensitive_header)) { | 
 | 		/* The first token is the type, which is OK to log */ | 
 | 		while (isspace(*sensitive_header)) | 
 | 			sensitive_header++; | 
 | 		while (*sensitive_header && !isspace(*sensitive_header)) | 
 | 			sensitive_header++; | 
 | 		/* Everything else is opaque and possibly sensitive */ | 
 | 		strbuf_setlen(header,  sensitive_header - header->buf); | 
 | 		strbuf_addstr(header, " <redacted>"); | 
 | 	} | 
 | } | 
 |  | 
 | static void curl_dump_header(const char *text, unsigned char *ptr, size_t size, int hide_sensitive_header) | 
 | { | 
 | 	struct strbuf out = STRBUF_INIT; | 
 | 	struct strbuf **headers, **header; | 
 |  | 
 | 	strbuf_addf(&out, "%s, %10.10ld bytes (0x%8.8lx)\n", | 
 | 		text, (long)size, (long)size); | 
 | 	trace_strbuf(&trace_curl, &out); | 
 | 	strbuf_reset(&out); | 
 | 	strbuf_add(&out, ptr, size); | 
 | 	headers = strbuf_split_max(&out, '\n', 0); | 
 |  | 
 | 	for (header = headers; *header; header++) { | 
 | 		if (hide_sensitive_header) | 
 | 			redact_sensitive_header(*header); | 
 | 		strbuf_insert((*header), 0, text, strlen(text)); | 
 | 		strbuf_insert((*header), strlen(text), ": ", 2); | 
 | 		strbuf_rtrim((*header)); | 
 | 		strbuf_addch((*header), '\n'); | 
 | 		trace_strbuf(&trace_curl, (*header)); | 
 | 	} | 
 | 	strbuf_list_free(headers); | 
 | 	strbuf_release(&out); | 
 | } | 
 |  | 
 | static void curl_dump_data(const char *text, unsigned char *ptr, size_t size) | 
 | { | 
 | 	size_t i; | 
 | 	struct strbuf out = STRBUF_INIT; | 
 | 	unsigned int width = 60; | 
 |  | 
 | 	strbuf_addf(&out, "%s, %10.10ld bytes (0x%8.8lx)\n", | 
 | 		text, (long)size, (long)size); | 
 | 	trace_strbuf(&trace_curl, &out); | 
 |  | 
 | 	for (i = 0; i < size; i += width) { | 
 | 		size_t w; | 
 |  | 
 | 		strbuf_reset(&out); | 
 | 		strbuf_addf(&out, "%s: ", text); | 
 | 		for (w = 0; (w < width) && (i + w < size); w++) { | 
 | 			unsigned char ch = ptr[i + w]; | 
 |  | 
 | 			strbuf_addch(&out, | 
 | 				       (ch >= 0x20) && (ch < 0x80) | 
 | 				       ? ch : '.'); | 
 | 		} | 
 | 		strbuf_addch(&out, '\n'); | 
 | 		trace_strbuf(&trace_curl, &out); | 
 | 	} | 
 | 	strbuf_release(&out); | 
 | } | 
 |  | 
 | static int curl_trace(CURL *handle, curl_infotype type, char *data, size_t size, void *userp) | 
 | { | 
 | 	const char *text; | 
 | 	enum { NO_FILTER = 0, DO_FILTER = 1 }; | 
 |  | 
 | 	switch (type) { | 
 | 	case CURLINFO_TEXT: | 
 | 		trace_printf_key(&trace_curl, "== Info: %s", data); | 
 | 	default:		/* we ignore unknown types by default */ | 
 | 		return 0; | 
 |  | 
 | 	case CURLINFO_HEADER_OUT: | 
 | 		text = "=> Send header"; | 
 | 		curl_dump_header(text, (unsigned char *)data, size, DO_FILTER); | 
 | 		break; | 
 | 	case CURLINFO_DATA_OUT: | 
 | 		text = "=> Send data"; | 
 | 		curl_dump_data(text, (unsigned char *)data, size); | 
 | 		break; | 
 | 	case CURLINFO_SSL_DATA_OUT: | 
 | 		text = "=> Send SSL data"; | 
 | 		curl_dump_data(text, (unsigned char *)data, size); | 
 | 		break; | 
 | 	case CURLINFO_HEADER_IN: | 
 | 		text = "<= Recv header"; | 
 | 		curl_dump_header(text, (unsigned char *)data, size, NO_FILTER); | 
 | 		break; | 
 | 	case CURLINFO_DATA_IN: | 
 | 		text = "<= Recv data"; | 
 | 		curl_dump_data(text, (unsigned char *)data, size); | 
 | 		break; | 
 | 	case CURLINFO_SSL_DATA_IN: | 
 | 		text = "<= Recv SSL data"; | 
 | 		curl_dump_data(text, (unsigned char *)data, size); | 
 | 		break; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void setup_curl_trace(CURL *handle) | 
 | { | 
 | 	if (!trace_want(&trace_curl)) | 
 | 		return; | 
 | 	curl_easy_setopt(handle, CURLOPT_VERBOSE, 1L); | 
 | 	curl_easy_setopt(handle, CURLOPT_DEBUGFUNCTION, curl_trace); | 
 | 	curl_easy_setopt(handle, CURLOPT_DEBUGDATA, NULL); | 
 | } | 
 |  | 
 |  | 
 | static CURL *get_curl_handle(void) | 
 | { | 
 | 	CURL *result = curl_easy_init(); | 
 | 	long allowed_protocols = 0; | 
 |  | 
 | 	if (!result) | 
 | 		die("curl_easy_init failed"); | 
 |  | 
 | 	if (!curl_ssl_verify) { | 
 | 		curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 0); | 
 | 		curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 0); | 
 | 	} else { | 
 | 		/* Verify authenticity of the peer's certificate */ | 
 | 		curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 1); | 
 | 		/* The name in the cert must match whom we tried to connect */ | 
 | 		curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 2); | 
 | 	} | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x070907 | 
 | 	curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL); | 
 | #endif | 
 | #ifdef LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | 	curl_easy_setopt(result, CURLOPT_HTTPAUTH, CURLAUTH_ANY); | 
 | #endif | 
 |  | 
 | 	if (http_proactive_auth) | 
 | 		init_curl_http_auth(result); | 
 |  | 
 | 	if (getenv("GIT_SSL_VERSION")) | 
 | 		ssl_version = getenv("GIT_SSL_VERSION"); | 
 | 	if (ssl_version && *ssl_version) { | 
 | 		int i; | 
 | 		for (i = 0; i < ARRAY_SIZE(sslversions); i++) { | 
 | 			if (!strcmp(ssl_version, sslversions[i].name)) { | 
 | 				curl_easy_setopt(result, CURLOPT_SSLVERSION, | 
 | 						 sslversions[i].ssl_version); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (i == ARRAY_SIZE(sslversions)) | 
 | 			warning("unsupported ssl version %s: using default", | 
 | 				ssl_version); | 
 | 	} | 
 |  | 
 | 	if (getenv("GIT_SSL_CIPHER_LIST")) | 
 | 		ssl_cipherlist = getenv("GIT_SSL_CIPHER_LIST"); | 
 | 	if (ssl_cipherlist != NULL && *ssl_cipherlist) | 
 | 		curl_easy_setopt(result, CURLOPT_SSL_CIPHER_LIST, | 
 | 				ssl_cipherlist); | 
 |  | 
 | 	if (ssl_cert != NULL) | 
 | 		curl_easy_setopt(result, CURLOPT_SSLCERT, ssl_cert); | 
 | 	if (has_cert_password()) | 
 | 		curl_easy_setopt(result, CURLOPT_KEYPASSWD, cert_auth.password); | 
 | #if LIBCURL_VERSION_NUM >= 0x070903 | 
 | 	if (ssl_key != NULL) | 
 | 		curl_easy_setopt(result, CURLOPT_SSLKEY, ssl_key); | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x070908 | 
 | 	if (ssl_capath != NULL) | 
 | 		curl_easy_setopt(result, CURLOPT_CAPATH, ssl_capath); | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x072c00 | 
 | 	if (ssl_pinnedkey != NULL) | 
 | 		curl_easy_setopt(result, CURLOPT_PINNEDPUBLICKEY, ssl_pinnedkey); | 
 | #endif | 
 | 	if (ssl_cainfo != NULL) | 
 | 		curl_easy_setopt(result, CURLOPT_CAINFO, ssl_cainfo); | 
 |  | 
 | 	if (curl_low_speed_limit > 0 && curl_low_speed_time > 0) { | 
 | 		curl_easy_setopt(result, CURLOPT_LOW_SPEED_LIMIT, | 
 | 				 curl_low_speed_limit); | 
 | 		curl_easy_setopt(result, CURLOPT_LOW_SPEED_TIME, | 
 | 				 curl_low_speed_time); | 
 | 	} | 
 |  | 
 | 	curl_easy_setopt(result, CURLOPT_FOLLOWLOCATION, 1); | 
 | 	curl_easy_setopt(result, CURLOPT_MAXREDIRS, 20); | 
 | #if LIBCURL_VERSION_NUM >= 0x071301 | 
 | 	curl_easy_setopt(result, CURLOPT_POSTREDIR, CURL_REDIR_POST_ALL); | 
 | #elif LIBCURL_VERSION_NUM >= 0x071101 | 
 | 	curl_easy_setopt(result, CURLOPT_POST301, 1); | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x071304 | 
 | 	if (is_transport_allowed("http")) | 
 | 		allowed_protocols |= CURLPROTO_HTTP; | 
 | 	if (is_transport_allowed("https")) | 
 | 		allowed_protocols |= CURLPROTO_HTTPS; | 
 | 	if (is_transport_allowed("ftp")) | 
 | 		allowed_protocols |= CURLPROTO_FTP; | 
 | 	if (is_transport_allowed("ftps")) | 
 | 		allowed_protocols |= CURLPROTO_FTPS; | 
 | 	curl_easy_setopt(result, CURLOPT_REDIR_PROTOCOLS, allowed_protocols); | 
 | #else | 
 | 	if (transport_restrict_protocols()) | 
 | 		warning("protocol restrictions not applied to curl redirects because\n" | 
 | 			"your curl version is too old (>= 7.19.4)"); | 
 | #endif | 
 | 	if (getenv("GIT_CURL_VERBOSE")) | 
 | 		curl_easy_setopt(result, CURLOPT_VERBOSE, 1L); | 
 | 	setup_curl_trace(result); | 
 |  | 
 | 	curl_easy_setopt(result, CURLOPT_USERAGENT, | 
 | 		user_agent ? user_agent : git_user_agent()); | 
 |  | 
 | 	if (curl_ftp_no_epsv) | 
 | 		curl_easy_setopt(result, CURLOPT_FTP_USE_EPSV, 0); | 
 |  | 
 | #ifdef CURLOPT_USE_SSL | 
 | 	if (curl_ssl_try) | 
 | 		curl_easy_setopt(result, CURLOPT_USE_SSL, CURLUSESSL_TRY); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * CURL also examines these variables as a fallback; but we need to query | 
 | 	 * them here in order to decide whether to prompt for missing password (cf. | 
 | 	 * init_curl_proxy_auth()). | 
 | 	 * | 
 | 	 * Unlike many other common environment variables, these are historically | 
 | 	 * lowercase only. It appears that CURL did not know this and implemented | 
 | 	 * only uppercase variants, which was later corrected to take both - with | 
 | 	 * the exception of http_proxy, which is lowercase only also in CURL. As | 
 | 	 * the lowercase versions are the historical quasi-standard, they take | 
 | 	 * precedence here, as in CURL. | 
 | 	 */ | 
 | 	if (!curl_http_proxy) { | 
 | 		if (!strcmp(http_auth.protocol, "https")) { | 
 | 			var_override(&curl_http_proxy, getenv("HTTPS_PROXY")); | 
 | 			var_override(&curl_http_proxy, getenv("https_proxy")); | 
 | 		} else { | 
 | 			var_override(&curl_http_proxy, getenv("http_proxy")); | 
 | 		} | 
 | 		if (!curl_http_proxy) { | 
 | 			var_override(&curl_http_proxy, getenv("ALL_PROXY")); | 
 | 			var_override(&curl_http_proxy, getenv("all_proxy")); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (curl_http_proxy) { | 
 | 		curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy); | 
 | #if LIBCURL_VERSION_NUM >= 0x071800 | 
 | 		if (starts_with(curl_http_proxy, "socks5h")) | 
 | 			curl_easy_setopt(result, | 
 | 				CURLOPT_PROXYTYPE, CURLPROXY_SOCKS5_HOSTNAME); | 
 | 		else if (starts_with(curl_http_proxy, "socks5")) | 
 | 			curl_easy_setopt(result, | 
 | 				CURLOPT_PROXYTYPE, CURLPROXY_SOCKS5); | 
 | 		else if (starts_with(curl_http_proxy, "socks4a")) | 
 | 			curl_easy_setopt(result, | 
 | 				CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4A); | 
 | 		else if (starts_with(curl_http_proxy, "socks")) | 
 | 			curl_easy_setopt(result, | 
 | 				CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4); | 
 | #endif | 
 | 		if (strstr(curl_http_proxy, "://")) | 
 | 			credential_from_url(&proxy_auth, curl_http_proxy); | 
 | 		else { | 
 | 			struct strbuf url = STRBUF_INIT; | 
 | 			strbuf_addf(&url, "http://%s", curl_http_proxy); | 
 | 			credential_from_url(&proxy_auth, url.buf); | 
 | 			strbuf_release(&url); | 
 | 		} | 
 |  | 
 | 		curl_easy_setopt(result, CURLOPT_PROXY, proxy_auth.host); | 
 | #if LIBCURL_VERSION_NUM >= 0x071304 | 
 | 		var_override(&curl_no_proxy, getenv("NO_PROXY")); | 
 | 		var_override(&curl_no_proxy, getenv("no_proxy")); | 
 | 		curl_easy_setopt(result, CURLOPT_NOPROXY, curl_no_proxy); | 
 | #endif | 
 | 	} | 
 | 	init_curl_proxy_auth(result); | 
 |  | 
 | 	set_curl_keepalive(result); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static void set_from_env(const char **var, const char *envname) | 
 | { | 
 | 	const char *val = getenv(envname); | 
 | 	if (val) | 
 | 		*var = val; | 
 | } | 
 |  | 
 | void http_init(struct remote *remote, const char *url, int proactive_auth) | 
 | { | 
 | 	char *low_speed_limit; | 
 | 	char *low_speed_time; | 
 | 	char *normalized_url; | 
 | 	struct urlmatch_config config = { STRING_LIST_INIT_DUP }; | 
 |  | 
 | 	config.section = "http"; | 
 | 	config.key = NULL; | 
 | 	config.collect_fn = http_options; | 
 | 	config.cascade_fn = git_default_config; | 
 | 	config.cb = NULL; | 
 |  | 
 | 	http_is_verbose = 0; | 
 | 	normalized_url = url_normalize(url, &config.url); | 
 |  | 
 | 	git_config(urlmatch_config_entry, &config); | 
 | 	free(normalized_url); | 
 |  | 
 | 	if (curl_global_init(CURL_GLOBAL_ALL) != CURLE_OK) | 
 | 		die("curl_global_init failed"); | 
 |  | 
 | 	http_proactive_auth = proactive_auth; | 
 |  | 
 | 	if (remote && remote->http_proxy) | 
 | 		curl_http_proxy = xstrdup(remote->http_proxy); | 
 |  | 
 | 	if (remote) | 
 | 		var_override(&http_proxy_authmethod, remote->http_proxy_authmethod); | 
 |  | 
 | 	pragma_header = curl_slist_append(http_copy_default_headers(), | 
 | 		"Pragma: no-cache"); | 
 | 	no_pragma_header = curl_slist_append(http_copy_default_headers(), | 
 | 		"Pragma:"); | 
 |  | 
 | #ifdef USE_CURL_MULTI | 
 | 	{ | 
 | 		char *http_max_requests = getenv("GIT_HTTP_MAX_REQUESTS"); | 
 | 		if (http_max_requests != NULL) | 
 | 			max_requests = atoi(http_max_requests); | 
 | 	} | 
 |  | 
 | 	curlm = curl_multi_init(); | 
 | 	if (!curlm) | 
 | 		die("curl_multi_init failed"); | 
 | #endif | 
 |  | 
 | 	if (getenv("GIT_SSL_NO_VERIFY")) | 
 | 		curl_ssl_verify = 0; | 
 |  | 
 | 	set_from_env(&ssl_cert, "GIT_SSL_CERT"); | 
 | #if LIBCURL_VERSION_NUM >= 0x070903 | 
 | 	set_from_env(&ssl_key, "GIT_SSL_KEY"); | 
 | #endif | 
 | #if LIBCURL_VERSION_NUM >= 0x070908 | 
 | 	set_from_env(&ssl_capath, "GIT_SSL_CAPATH"); | 
 | #endif | 
 | 	set_from_env(&ssl_cainfo, "GIT_SSL_CAINFO"); | 
 |  | 
 | 	set_from_env(&user_agent, "GIT_HTTP_USER_AGENT"); | 
 |  | 
 | 	low_speed_limit = getenv("GIT_HTTP_LOW_SPEED_LIMIT"); | 
 | 	if (low_speed_limit != NULL) | 
 | 		curl_low_speed_limit = strtol(low_speed_limit, NULL, 10); | 
 | 	low_speed_time = getenv("GIT_HTTP_LOW_SPEED_TIME"); | 
 | 	if (low_speed_time != NULL) | 
 | 		curl_low_speed_time = strtol(low_speed_time, NULL, 10); | 
 |  | 
 | 	if (curl_ssl_verify == -1) | 
 | 		curl_ssl_verify = 1; | 
 |  | 
 | 	curl_session_count = 0; | 
 | #ifdef USE_CURL_MULTI | 
 | 	if (max_requests < 1) | 
 | 		max_requests = DEFAULT_MAX_REQUESTS; | 
 | #endif | 
 |  | 
 | 	if (getenv("GIT_CURL_FTP_NO_EPSV")) | 
 | 		curl_ftp_no_epsv = 1; | 
 |  | 
 | 	if (url) { | 
 | 		credential_from_url(&http_auth, url); | 
 | 		if (!ssl_cert_password_required && | 
 | 		    getenv("GIT_SSL_CERT_PASSWORD_PROTECTED") && | 
 | 		    starts_with(url, "https://")) | 
 | 			ssl_cert_password_required = 1; | 
 | 	} | 
 |  | 
 | #ifndef NO_CURL_EASY_DUPHANDLE | 
 | 	curl_default = get_curl_handle(); | 
 | #endif | 
 | } | 
 |  | 
 | void http_cleanup(void) | 
 | { | 
 | 	struct active_request_slot *slot = active_queue_head; | 
 |  | 
 | 	while (slot != NULL) { | 
 | 		struct active_request_slot *next = slot->next; | 
 | 		if (slot->curl != NULL) { | 
 | #ifdef USE_CURL_MULTI | 
 | 			curl_multi_remove_handle(curlm, slot->curl); | 
 | #endif | 
 | 			curl_easy_cleanup(slot->curl); | 
 | 		} | 
 | 		free(slot); | 
 | 		slot = next; | 
 | 	} | 
 | 	active_queue_head = NULL; | 
 |  | 
 | #ifndef NO_CURL_EASY_DUPHANDLE | 
 | 	curl_easy_cleanup(curl_default); | 
 | #endif | 
 |  | 
 | #ifdef USE_CURL_MULTI | 
 | 	curl_multi_cleanup(curlm); | 
 | #endif | 
 | 	curl_global_cleanup(); | 
 |  | 
 | 	curl_slist_free_all(extra_http_headers); | 
 | 	extra_http_headers = NULL; | 
 |  | 
 | 	curl_slist_free_all(pragma_header); | 
 | 	pragma_header = NULL; | 
 |  | 
 | 	curl_slist_free_all(no_pragma_header); | 
 | 	no_pragma_header = NULL; | 
 |  | 
 | 	if (curl_http_proxy) { | 
 | 		free((void *)curl_http_proxy); | 
 | 		curl_http_proxy = NULL; | 
 | 	} | 
 |  | 
 | 	if (proxy_auth.password) { | 
 | 		memset(proxy_auth.password, 0, strlen(proxy_auth.password)); | 
 | 		free(proxy_auth.password); | 
 | 		proxy_auth.password = NULL; | 
 | 	} | 
 |  | 
 | 	free((void *)curl_proxyuserpwd); | 
 | 	curl_proxyuserpwd = NULL; | 
 |  | 
 | 	free((void *)http_proxy_authmethod); | 
 | 	http_proxy_authmethod = NULL; | 
 |  | 
 | 	if (cert_auth.password != NULL) { | 
 | 		memset(cert_auth.password, 0, strlen(cert_auth.password)); | 
 | 		free(cert_auth.password); | 
 | 		cert_auth.password = NULL; | 
 | 	} | 
 | 	ssl_cert_password_required = 0; | 
 |  | 
 | 	free(cached_accept_language); | 
 | 	cached_accept_language = NULL; | 
 | } | 
 |  | 
 | struct active_request_slot *get_active_slot(void) | 
 | { | 
 | 	struct active_request_slot *slot = active_queue_head; | 
 | 	struct active_request_slot *newslot; | 
 |  | 
 | #ifdef USE_CURL_MULTI | 
 | 	int num_transfers; | 
 |  | 
 | 	/* Wait for a slot to open up if the queue is full */ | 
 | 	while (active_requests >= max_requests) { | 
 | 		curl_multi_perform(curlm, &num_transfers); | 
 | 		if (num_transfers < active_requests) | 
 | 			process_curl_messages(); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	while (slot != NULL && slot->in_use) | 
 | 		slot = slot->next; | 
 |  | 
 | 	if (slot == NULL) { | 
 | 		newslot = xmalloc(sizeof(*newslot)); | 
 | 		newslot->curl = NULL; | 
 | 		newslot->in_use = 0; | 
 | 		newslot->next = NULL; | 
 |  | 
 | 		slot = active_queue_head; | 
 | 		if (slot == NULL) { | 
 | 			active_queue_head = newslot; | 
 | 		} else { | 
 | 			while (slot->next != NULL) | 
 | 				slot = slot->next; | 
 | 			slot->next = newslot; | 
 | 		} | 
 | 		slot = newslot; | 
 | 	} | 
 |  | 
 | 	if (slot->curl == NULL) { | 
 | #ifdef NO_CURL_EASY_DUPHANDLE | 
 | 		slot->curl = get_curl_handle(); | 
 | #else | 
 | 		slot->curl = curl_easy_duphandle(curl_default); | 
 | #endif | 
 | 		curl_session_count++; | 
 | 	} | 
 |  | 
 | 	active_requests++; | 
 | 	slot->in_use = 1; | 
 | 	slot->results = NULL; | 
 | 	slot->finished = NULL; | 
 | 	slot->callback_data = NULL; | 
 | 	slot->callback_func = NULL; | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_COOKIEFILE, curl_cookie_file); | 
 | 	if (curl_save_cookies) | 
 | 		curl_easy_setopt(slot->curl, CURLOPT_COOKIEJAR, curl_cookie_file); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, pragma_header); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_ERRORBUFFER, curl_errorstr); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_CUSTOMREQUEST, NULL); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_READFUNCTION, NULL); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, NULL); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_POSTFIELDS, NULL); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_UPLOAD, 0); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 1); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_RANGE, NULL); | 
 |  | 
 | #if LIBCURL_VERSION_NUM >= 0x070a08 | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_IPRESOLVE, git_curl_ipresolve); | 
 | #endif | 
 | #ifdef LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_HTTPAUTH, http_auth_methods); | 
 | #endif | 
 | 	if (http_auth.password || curl_empty_auth) | 
 | 		init_curl_http_auth(slot->curl); | 
 |  | 
 | 	return slot; | 
 | } | 
 |  | 
 | int start_active_slot(struct active_request_slot *slot) | 
 | { | 
 | #ifdef USE_CURL_MULTI | 
 | 	CURLMcode curlm_result = curl_multi_add_handle(curlm, slot->curl); | 
 | 	int num_transfers; | 
 |  | 
 | 	if (curlm_result != CURLM_OK && | 
 | 	    curlm_result != CURLM_CALL_MULTI_PERFORM) { | 
 | 		active_requests--; | 
 | 		slot->in_use = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We know there must be something to do, since we just added | 
 | 	 * something. | 
 | 	 */ | 
 | 	curl_multi_perform(curlm, &num_transfers); | 
 | #endif | 
 | 	return 1; | 
 | } | 
 |  | 
 | #ifdef USE_CURL_MULTI | 
 | struct fill_chain { | 
 | 	void *data; | 
 | 	int (*fill)(void *); | 
 | 	struct fill_chain *next; | 
 | }; | 
 |  | 
 | static struct fill_chain *fill_cfg; | 
 |  | 
 | void add_fill_function(void *data, int (*fill)(void *)) | 
 | { | 
 | 	struct fill_chain *new = xmalloc(sizeof(*new)); | 
 | 	struct fill_chain **linkp = &fill_cfg; | 
 | 	new->data = data; | 
 | 	new->fill = fill; | 
 | 	new->next = NULL; | 
 | 	while (*linkp) | 
 | 		linkp = &(*linkp)->next; | 
 | 	*linkp = new; | 
 | } | 
 |  | 
 | void fill_active_slots(void) | 
 | { | 
 | 	struct active_request_slot *slot = active_queue_head; | 
 |  | 
 | 	while (active_requests < max_requests) { | 
 | 		struct fill_chain *fill; | 
 | 		for (fill = fill_cfg; fill; fill = fill->next) | 
 | 			if (fill->fill(fill->data)) | 
 | 				break; | 
 |  | 
 | 		if (!fill) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	while (slot != NULL) { | 
 | 		if (!slot->in_use && slot->curl != NULL | 
 | 			&& curl_session_count > min_curl_sessions) { | 
 | 			curl_easy_cleanup(slot->curl); | 
 | 			slot->curl = NULL; | 
 | 			curl_session_count--; | 
 | 		} | 
 | 		slot = slot->next; | 
 | 	} | 
 | } | 
 |  | 
 | void step_active_slots(void) | 
 | { | 
 | 	int num_transfers; | 
 | 	CURLMcode curlm_result; | 
 |  | 
 | 	do { | 
 | 		curlm_result = curl_multi_perform(curlm, &num_transfers); | 
 | 	} while (curlm_result == CURLM_CALL_MULTI_PERFORM); | 
 | 	if (num_transfers < active_requests) { | 
 | 		process_curl_messages(); | 
 | 		fill_active_slots(); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | void run_active_slot(struct active_request_slot *slot) | 
 | { | 
 | #ifdef USE_CURL_MULTI | 
 | 	fd_set readfds; | 
 | 	fd_set writefds; | 
 | 	fd_set excfds; | 
 | 	int max_fd; | 
 | 	struct timeval select_timeout; | 
 | 	int finished = 0; | 
 |  | 
 | 	slot->finished = &finished; | 
 | 	while (!finished) { | 
 | 		step_active_slots(); | 
 |  | 
 | 		if (slot->in_use) { | 
 | #if LIBCURL_VERSION_NUM >= 0x070f04 | 
 | 			long curl_timeout; | 
 | 			curl_multi_timeout(curlm, &curl_timeout); | 
 | 			if (curl_timeout == 0) { | 
 | 				continue; | 
 | 			} else if (curl_timeout == -1) { | 
 | 				select_timeout.tv_sec  = 0; | 
 | 				select_timeout.tv_usec = 50000; | 
 | 			} else { | 
 | 				select_timeout.tv_sec  =  curl_timeout / 1000; | 
 | 				select_timeout.tv_usec = (curl_timeout % 1000) * 1000; | 
 | 			} | 
 | #else | 
 | 			select_timeout.tv_sec  = 0; | 
 | 			select_timeout.tv_usec = 50000; | 
 | #endif | 
 |  | 
 | 			max_fd = -1; | 
 | 			FD_ZERO(&readfds); | 
 | 			FD_ZERO(&writefds); | 
 | 			FD_ZERO(&excfds); | 
 | 			curl_multi_fdset(curlm, &readfds, &writefds, &excfds, &max_fd); | 
 |  | 
 | 			/* | 
 | 			 * It can happen that curl_multi_timeout returns a pathologically | 
 | 			 * long timeout when curl_multi_fdset returns no file descriptors | 
 | 			 * to read.  See commit message for more details. | 
 | 			 */ | 
 | 			if (max_fd < 0 && | 
 | 			    (select_timeout.tv_sec > 0 || | 
 | 			     select_timeout.tv_usec > 50000)) { | 
 | 				select_timeout.tv_sec  = 0; | 
 | 				select_timeout.tv_usec = 50000; | 
 | 			} | 
 |  | 
 | 			select(max_fd+1, &readfds, &writefds, &excfds, &select_timeout); | 
 | 		} | 
 | 	} | 
 | #else | 
 | 	while (slot->in_use) { | 
 | 		slot->curl_result = curl_easy_perform(slot->curl); | 
 | 		finish_active_slot(slot); | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | static void release_active_slot(struct active_request_slot *slot) | 
 | { | 
 | 	closedown_active_slot(slot); | 
 | 	if (slot->curl && curl_session_count > min_curl_sessions) { | 
 | #ifdef USE_CURL_MULTI | 
 | 		curl_multi_remove_handle(curlm, slot->curl); | 
 | #endif | 
 | 		curl_easy_cleanup(slot->curl); | 
 | 		slot->curl = NULL; | 
 | 		curl_session_count--; | 
 | 	} | 
 | #ifdef USE_CURL_MULTI | 
 | 	fill_active_slots(); | 
 | #endif | 
 | } | 
 |  | 
 | void finish_all_active_slots(void) | 
 | { | 
 | 	struct active_request_slot *slot = active_queue_head; | 
 |  | 
 | 	while (slot != NULL) | 
 | 		if (slot->in_use) { | 
 | 			run_active_slot(slot); | 
 | 			slot = active_queue_head; | 
 | 		} else { | 
 | 			slot = slot->next; | 
 | 		} | 
 | } | 
 |  | 
 | /* Helpers for modifying and creating URLs */ | 
 | static inline int needs_quote(int ch) | 
 | { | 
 | 	if (((ch >= 'A') && (ch <= 'Z')) | 
 | 			|| ((ch >= 'a') && (ch <= 'z')) | 
 | 			|| ((ch >= '0') && (ch <= '9')) | 
 | 			|| (ch == '/') | 
 | 			|| (ch == '-') | 
 | 			|| (ch == '.')) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static char *quote_ref_url(const char *base, const char *ref) | 
 | { | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 | 	const char *cp; | 
 | 	int ch; | 
 |  | 
 | 	end_url_with_slash(&buf, base); | 
 |  | 
 | 	for (cp = ref; (ch = *cp) != 0; cp++) | 
 | 		if (needs_quote(ch)) | 
 | 			strbuf_addf(&buf, "%%%02x", ch); | 
 | 		else | 
 | 			strbuf_addch(&buf, *cp); | 
 |  | 
 | 	return strbuf_detach(&buf, NULL); | 
 | } | 
 |  | 
 | void append_remote_object_url(struct strbuf *buf, const char *url, | 
 | 			      const char *hex, | 
 | 			      int only_two_digit_prefix) | 
 | { | 
 | 	end_url_with_slash(buf, url); | 
 |  | 
 | 	strbuf_addf(buf, "objects/%.*s/", 2, hex); | 
 | 	if (!only_two_digit_prefix) | 
 | 		strbuf_addstr(buf, hex + 2); | 
 | } | 
 |  | 
 | char *get_remote_object_url(const char *url, const char *hex, | 
 | 			    int only_two_digit_prefix) | 
 | { | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 | 	append_remote_object_url(&buf, url, hex, only_two_digit_prefix); | 
 | 	return strbuf_detach(&buf, NULL); | 
 | } | 
 |  | 
 | static int handle_curl_result(struct slot_results *results) | 
 | { | 
 | 	/* | 
 | 	 * If we see a failing http code with CURLE_OK, we have turned off | 
 | 	 * FAILONERROR (to keep the server's custom error response), and should | 
 | 	 * translate the code into failure here. | 
 | 	 */ | 
 | 	if (results->curl_result == CURLE_OK && | 
 | 	    results->http_code >= 400) { | 
 | 		results->curl_result = CURLE_HTTP_RETURNED_ERROR; | 
 | 		/* | 
 | 		 * Normally curl will already have put the "reason phrase" | 
 | 		 * from the server into curl_errorstr; unfortunately without | 
 | 		 * FAILONERROR it is lost, so we can give only the numeric | 
 | 		 * status code. | 
 | 		 */ | 
 | 		snprintf(curl_errorstr, sizeof(curl_errorstr), | 
 | 			 "The requested URL returned error: %ld", | 
 | 			 results->http_code); | 
 | 	} | 
 |  | 
 | 	if (results->curl_result == CURLE_OK) { | 
 | 		credential_approve(&http_auth); | 
 | 		if (proxy_auth.password) | 
 | 			credential_approve(&proxy_auth); | 
 | 		return HTTP_OK; | 
 | 	} else if (missing_target(results)) | 
 | 		return HTTP_MISSING_TARGET; | 
 | 	else if (results->http_code == 401) { | 
 | 		if (http_auth.username && http_auth.password) { | 
 | 			credential_reject(&http_auth); | 
 | 			return HTTP_NOAUTH; | 
 | 		} else { | 
 | #ifdef LIBCURL_CAN_HANDLE_AUTH_ANY | 
 | 			http_auth_methods &= ~CURLAUTH_GSSNEGOTIATE; | 
 | #endif | 
 | 			return HTTP_REAUTH; | 
 | 		} | 
 | 	} else { | 
 | 		if (results->http_connectcode == 407) | 
 | 			credential_reject(&proxy_auth); | 
 | #if LIBCURL_VERSION_NUM >= 0x070c00 | 
 | 		if (!curl_errorstr[0]) | 
 | 			strlcpy(curl_errorstr, | 
 | 				curl_easy_strerror(results->curl_result), | 
 | 				sizeof(curl_errorstr)); | 
 | #endif | 
 | 		return HTTP_ERROR; | 
 | 	} | 
 | } | 
 |  | 
 | int run_one_slot(struct active_request_slot *slot, | 
 | 		 struct slot_results *results) | 
 | { | 
 | 	slot->results = results; | 
 | 	if (!start_active_slot(slot)) { | 
 | 		snprintf(curl_errorstr, sizeof(curl_errorstr), | 
 | 			 "failed to start HTTP request"); | 
 | 		return HTTP_START_FAILED; | 
 | 	} | 
 |  | 
 | 	run_active_slot(slot); | 
 | 	return handle_curl_result(results); | 
 | } | 
 |  | 
 | struct curl_slist *http_copy_default_headers(void) | 
 | { | 
 | 	struct curl_slist *headers = NULL, *h; | 
 |  | 
 | 	for (h = extra_http_headers; h; h = h->next) | 
 | 		headers = curl_slist_append(headers, h->data); | 
 |  | 
 | 	return headers; | 
 | } | 
 |  | 
 | static CURLcode curlinfo_strbuf(CURL *curl, CURLINFO info, struct strbuf *buf) | 
 | { | 
 | 	char *ptr; | 
 | 	CURLcode ret; | 
 |  | 
 | 	strbuf_reset(buf); | 
 | 	ret = curl_easy_getinfo(curl, info, &ptr); | 
 | 	if (!ret && ptr) | 
 | 		strbuf_addstr(buf, ptr); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Check for and extract a content-type parameter. "raw" | 
 |  * should be positioned at the start of the potential | 
 |  * parameter, with any whitespace already removed. | 
 |  * | 
 |  * "name" is the name of the parameter. The value is appended | 
 |  * to "out". | 
 |  */ | 
 | static int extract_param(const char *raw, const char *name, | 
 | 			 struct strbuf *out) | 
 | { | 
 | 	size_t len = strlen(name); | 
 |  | 
 | 	if (strncasecmp(raw, name, len)) | 
 | 		return -1; | 
 | 	raw += len; | 
 |  | 
 | 	if (*raw != '=') | 
 | 		return -1; | 
 | 	raw++; | 
 |  | 
 | 	while (*raw && !isspace(*raw) && *raw != ';') | 
 | 		strbuf_addch(out, *raw++); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Extract a normalized version of the content type, with any | 
 |  * spaces suppressed, all letters lowercased, and no trailing ";" | 
 |  * or parameters. | 
 |  * | 
 |  * Note that we will silently remove even invalid whitespace. For | 
 |  * example, "text / plain" is specifically forbidden by RFC 2616, | 
 |  * but "text/plain" is the only reasonable output, and this keeps | 
 |  * our code simple. | 
 |  * | 
 |  * If the "charset" argument is not NULL, store the value of any | 
 |  * charset parameter there. | 
 |  * | 
 |  * Example: | 
 |  *   "TEXT/PLAIN; charset=utf-8" -> "text/plain", "utf-8" | 
 |  *   "text / plain" -> "text/plain" | 
 |  */ | 
 | static void extract_content_type(struct strbuf *raw, struct strbuf *type, | 
 | 				 struct strbuf *charset) | 
 | { | 
 | 	const char *p; | 
 |  | 
 | 	strbuf_reset(type); | 
 | 	strbuf_grow(type, raw->len); | 
 | 	for (p = raw->buf; *p; p++) { | 
 | 		if (isspace(*p)) | 
 | 			continue; | 
 | 		if (*p == ';') { | 
 | 			p++; | 
 | 			break; | 
 | 		} | 
 | 		strbuf_addch(type, tolower(*p)); | 
 | 	} | 
 |  | 
 | 	if (!charset) | 
 | 		return; | 
 |  | 
 | 	strbuf_reset(charset); | 
 | 	while (*p) { | 
 | 		while (isspace(*p) || *p == ';') | 
 | 			p++; | 
 | 		if (!extract_param(p, "charset", charset)) | 
 | 			return; | 
 | 		while (*p && !isspace(*p)) | 
 | 			p++; | 
 | 	} | 
 |  | 
 | 	if (!charset->len && starts_with(type->buf, "text/")) | 
 | 		strbuf_addstr(charset, "ISO-8859-1"); | 
 | } | 
 |  | 
 | static void write_accept_language(struct strbuf *buf) | 
 | { | 
 | 	/* | 
 | 	 * MAX_DECIMAL_PLACES must not be larger than 3. If it is larger than | 
 | 	 * that, q-value will be smaller than 0.001, the minimum q-value the | 
 | 	 * HTTP specification allows. See | 
 | 	 * http://tools.ietf.org/html/rfc7231#section-5.3.1 for q-value. | 
 | 	 */ | 
 | 	const int MAX_DECIMAL_PLACES = 3; | 
 | 	const int MAX_LANGUAGE_TAGS = 1000; | 
 | 	const int MAX_ACCEPT_LANGUAGE_HEADER_SIZE = 4000; | 
 | 	char **language_tags = NULL; | 
 | 	int num_langs = 0; | 
 | 	const char *s = get_preferred_languages(); | 
 | 	int i; | 
 | 	struct strbuf tag = STRBUF_INIT; | 
 |  | 
 | 	/* Don't add Accept-Language header if no language is preferred. */ | 
 | 	if (!s) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * Split the colon-separated string of preferred languages into | 
 | 	 * language_tags array. | 
 | 	 */ | 
 | 	do { | 
 | 		/* collect language tag */ | 
 | 		for (; *s && (isalnum(*s) || *s == '_'); s++) | 
 | 			strbuf_addch(&tag, *s == '_' ? '-' : *s); | 
 |  | 
 | 		/* skip .codeset, @modifier and any other unnecessary parts */ | 
 | 		while (*s && *s != ':') | 
 | 			s++; | 
 |  | 
 | 		if (tag.len) { | 
 | 			num_langs++; | 
 | 			REALLOC_ARRAY(language_tags, num_langs); | 
 | 			language_tags[num_langs - 1] = strbuf_detach(&tag, NULL); | 
 | 			if (num_langs >= MAX_LANGUAGE_TAGS - 1) /* -1 for '*' */ | 
 | 				break; | 
 | 		} | 
 | 	} while (*s++); | 
 |  | 
 | 	/* write Accept-Language header into buf */ | 
 | 	if (num_langs) { | 
 | 		int last_buf_len = 0; | 
 | 		int max_q; | 
 | 		int decimal_places; | 
 | 		char q_format[32]; | 
 |  | 
 | 		/* add '*' */ | 
 | 		REALLOC_ARRAY(language_tags, num_langs + 1); | 
 | 		language_tags[num_langs++] = "*"; /* it's OK; this won't be freed */ | 
 |  | 
 | 		/* compute decimal_places */ | 
 | 		for (max_q = 1, decimal_places = 0; | 
 | 		     max_q < num_langs && decimal_places <= MAX_DECIMAL_PLACES; | 
 | 		     decimal_places++, max_q *= 10) | 
 | 			; | 
 |  | 
 | 		xsnprintf(q_format, sizeof(q_format), ";q=0.%%0%dd", decimal_places); | 
 |  | 
 | 		strbuf_addstr(buf, "Accept-Language: "); | 
 |  | 
 | 		for (i = 0; i < num_langs; i++) { | 
 | 			if (i > 0) | 
 | 				strbuf_addstr(buf, ", "); | 
 |  | 
 | 			strbuf_addstr(buf, language_tags[i]); | 
 |  | 
 | 			if (i > 0) | 
 | 				strbuf_addf(buf, q_format, max_q - i); | 
 |  | 
 | 			if (buf->len > MAX_ACCEPT_LANGUAGE_HEADER_SIZE) { | 
 | 				strbuf_remove(buf, last_buf_len, buf->len - last_buf_len); | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			last_buf_len = buf->len; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* free language tags -- last one is a static '*' */ | 
 | 	for (i = 0; i < num_langs - 1; i++) | 
 | 		free(language_tags[i]); | 
 | 	free(language_tags); | 
 | } | 
 |  | 
 | /* | 
 |  * Get an Accept-Language header which indicates user's preferred languages. | 
 |  * | 
 |  * Examples: | 
 |  *   LANGUAGE= -> "" | 
 |  *   LANGUAGE=ko:en -> "Accept-Language: ko, en; q=0.9, *; q=0.1" | 
 |  *   LANGUAGE=ko_KR.UTF-8:sr@latin -> "Accept-Language: ko-KR, sr; q=0.9, *; q=0.1" | 
 |  *   LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *; q=0.1" | 
 |  *   LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *; q=0.1" | 
 |  *   LANGUAGE= LANG=C -> "" | 
 |  */ | 
 | static const char *get_accept_language(void) | 
 | { | 
 | 	if (!cached_accept_language) { | 
 | 		struct strbuf buf = STRBUF_INIT; | 
 | 		write_accept_language(&buf); | 
 | 		if (buf.len > 0) | 
 | 			cached_accept_language = strbuf_detach(&buf, NULL); | 
 | 	} | 
 |  | 
 | 	return cached_accept_language; | 
 | } | 
 |  | 
 | static void http_opt_request_remainder(CURL *curl, off_t pos) | 
 | { | 
 | 	char buf[128]; | 
 | 	xsnprintf(buf, sizeof(buf), "%"PRIuMAX"-", (uintmax_t)pos); | 
 | 	curl_easy_setopt(curl, CURLOPT_RANGE, buf); | 
 | } | 
 |  | 
 | /* http_request() targets */ | 
 | #define HTTP_REQUEST_STRBUF	0 | 
 | #define HTTP_REQUEST_FILE	1 | 
 |  | 
 | static int http_request(const char *url, | 
 | 			void *result, int target, | 
 | 			const struct http_get_options *options) | 
 | { | 
 | 	struct active_request_slot *slot; | 
 | 	struct slot_results results; | 
 | 	struct curl_slist *headers = http_copy_default_headers(); | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 | 	const char *accept_language; | 
 | 	int ret; | 
 |  | 
 | 	slot = get_active_slot(); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1); | 
 |  | 
 | 	if (result == NULL) { | 
 | 		curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1); | 
 | 	} else { | 
 | 		curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 0); | 
 | 		curl_easy_setopt(slot->curl, CURLOPT_FILE, result); | 
 |  | 
 | 		if (target == HTTP_REQUEST_FILE) { | 
 | 			off_t posn = ftello(result); | 
 | 			curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, | 
 | 					 fwrite); | 
 | 			if (posn > 0) | 
 | 				http_opt_request_remainder(slot->curl, posn); | 
 | 		} else | 
 | 			curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, | 
 | 					 fwrite_buffer); | 
 | 	} | 
 |  | 
 | 	accept_language = get_accept_language(); | 
 |  | 
 | 	if (accept_language) | 
 | 		headers = curl_slist_append(headers, accept_language); | 
 |  | 
 | 	strbuf_addstr(&buf, "Pragma:"); | 
 | 	if (options && options->no_cache) | 
 | 		strbuf_addstr(&buf, " no-cache"); | 
 | 	if (options && options->keep_error) | 
 | 		curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0); | 
 |  | 
 | 	headers = curl_slist_append(headers, buf.buf); | 
 |  | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_URL, url); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, headers); | 
 | 	curl_easy_setopt(slot->curl, CURLOPT_ENCODING, "gzip"); | 
 |  | 
 | 	ret = run_one_slot(slot, &results); | 
 |  | 
 | 	if (options && options->content_type) { | 
 | 		struct strbuf raw = STRBUF_INIT; | 
 | 		curlinfo_strbuf(slot->curl, CURLINFO_CONTENT_TYPE, &raw); | 
 | 		extract_content_type(&raw, options->content_type, | 
 | 				     options->charset); | 
 | 		strbuf_release(&raw); | 
 | 	} | 
 |  | 
 | 	if (options && options->effective_url) | 
 | 		curlinfo_strbuf(slot->curl, CURLINFO_EFFECTIVE_URL, | 
 | 				options->effective_url); | 
 |  | 
 | 	curl_slist_free_all(headers); | 
 | 	strbuf_release(&buf); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Update the "base" url to a more appropriate value, as deduced by | 
 |  * redirects seen when requesting a URL starting with "url". | 
 |  * | 
 |  * The "asked" parameter is a URL that we asked curl to access, and must begin | 
 |  * with "base". | 
 |  * | 
 |  * The "got" parameter is the URL that curl reported to us as where we ended | 
 |  * up. | 
 |  * | 
 |  * Returns 1 if we updated the base url, 0 otherwise. | 
 |  * | 
 |  * Our basic strategy is to compare "base" and "asked" to find the bits | 
 |  * specific to our request. We then strip those bits off of "got" to yield the | 
 |  * new base. So for example, if our base is "http://example.com/foo.git", | 
 |  * and we ask for "http://example.com/foo.git/info/refs", we might end up | 
 |  * with "https://other.example.com/foo.git/info/refs". We would want the | 
 |  * new URL to become "https://other.example.com/foo.git". | 
 |  * | 
 |  * Note that this assumes a sane redirect scheme. It's entirely possible | 
 |  * in the example above to end up at a URL that does not even end in | 
 |  * "info/refs".  In such a case we simply punt, as there is not much we can | 
 |  * do (and such a scheme is unlikely to represent a real git repository, | 
 |  * which means we are likely about to abort anyway). | 
 |  */ | 
 | static int update_url_from_redirect(struct strbuf *base, | 
 | 				    const char *asked, | 
 | 				    const struct strbuf *got) | 
 | { | 
 | 	const char *tail; | 
 | 	size_t tail_len; | 
 |  | 
 | 	if (!strcmp(asked, got->buf)) | 
 | 		return 0; | 
 |  | 
 | 	if (!skip_prefix(asked, base->buf, &tail)) | 
 | 		die("BUG: update_url_from_redirect: %s is not a superset of %s", | 
 | 		    asked, base->buf); | 
 |  | 
 | 	tail_len = strlen(tail); | 
 |  | 
 | 	if (got->len < tail_len || | 
 | 	    strcmp(tail, got->buf + got->len - tail_len)) | 
 | 		return 0; /* insane redirect scheme */ | 
 |  | 
 | 	strbuf_reset(base); | 
 | 	strbuf_add(base, got->buf, got->len - tail_len); | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int http_request_reauth(const char *url, | 
 | 			       void *result, int target, | 
 | 			       struct http_get_options *options) | 
 | { | 
 | 	int ret = http_request(url, result, target, options); | 
 |  | 
 | 	if (options && options->effective_url && options->base_url) { | 
 | 		if (update_url_from_redirect(options->base_url, | 
 | 					     url, options->effective_url)) { | 
 | 			credential_from_url(&http_auth, options->base_url->buf); | 
 | 			url = options->effective_url->buf; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ret != HTTP_REAUTH) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * If we are using KEEP_ERROR, the previous request may have | 
 | 	 * put cruft into our output stream; we should clear it out before | 
 | 	 * making our next request. We only know how to do this for | 
 | 	 * the strbuf case, but that is enough to satisfy current callers. | 
 | 	 */ | 
 | 	if (options && options->keep_error) { | 
 | 		switch (target) { | 
 | 		case HTTP_REQUEST_STRBUF: | 
 | 			strbuf_reset(result); | 
 | 			break; | 
 | 		default: | 
 | 			die("BUG: HTTP_KEEP_ERROR is only supported with strbufs"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	credential_fill(&http_auth); | 
 |  | 
 | 	return http_request(url, result, target, options); | 
 | } | 
 |  | 
 | int http_get_strbuf(const char *url, | 
 | 		    struct strbuf *result, | 
 | 		    struct http_get_options *options) | 
 | { | 
 | 	return http_request_reauth(url, result, HTTP_REQUEST_STRBUF, options); | 
 | } | 
 |  | 
 | /* | 
 |  * Downloads a URL and stores the result in the given file. | 
 |  * | 
 |  * If a previous interrupted download is detected (i.e. a previous temporary | 
 |  * file is still around) the download is resumed. | 
 |  */ | 
 | static int http_get_file(const char *url, const char *filename, | 
 | 			 struct http_get_options *options) | 
 | { | 
 | 	int ret; | 
 | 	struct strbuf tmpfile = STRBUF_INIT; | 
 | 	FILE *result; | 
 |  | 
 | 	strbuf_addf(&tmpfile, "%s.temp", filename); | 
 | 	result = fopen(tmpfile.buf, "a"); | 
 | 	if (!result) { | 
 | 		error("Unable to open local file %s", tmpfile.buf); | 
 | 		ret = HTTP_ERROR; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	ret = http_request_reauth(url, result, HTTP_REQUEST_FILE, options); | 
 | 	fclose(result); | 
 |  | 
 | 	if (ret == HTTP_OK && finalize_object_file(tmpfile.buf, filename)) | 
 | 		ret = HTTP_ERROR; | 
 | cleanup: | 
 | 	strbuf_release(&tmpfile); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int http_fetch_ref(const char *base, struct ref *ref) | 
 | { | 
 | 	struct http_get_options options = {0}; | 
 | 	char *url; | 
 | 	struct strbuf buffer = STRBUF_INIT; | 
 | 	int ret = -1; | 
 |  | 
 | 	options.no_cache = 1; | 
 |  | 
 | 	url = quote_ref_url(base, ref->name); | 
 | 	if (http_get_strbuf(url, &buffer, &options) == HTTP_OK) { | 
 | 		strbuf_rtrim(&buffer); | 
 | 		if (buffer.len == 40) | 
 | 			ret = get_oid_hex(buffer.buf, &ref->old_oid); | 
 | 		else if (starts_with(buffer.buf, "ref: ")) { | 
 | 			ref->symref = xstrdup(buffer.buf + 5); | 
 | 			ret = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	strbuf_release(&buffer); | 
 | 	free(url); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Helpers for fetching packs */ | 
 | static char *fetch_pack_index(unsigned char *sha1, const char *base_url) | 
 | { | 
 | 	char *url, *tmp; | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 |  | 
 | 	if (http_is_verbose) | 
 | 		fprintf(stderr, "Getting index for pack %s\n", sha1_to_hex(sha1)); | 
 |  | 
 | 	end_url_with_slash(&buf, base_url); | 
 | 	strbuf_addf(&buf, "objects/pack/pack-%s.idx", sha1_to_hex(sha1)); | 
 | 	url = strbuf_detach(&buf, NULL); | 
 |  | 
 | 	strbuf_addf(&buf, "%s.temp", sha1_pack_index_name(sha1)); | 
 | 	tmp = strbuf_detach(&buf, NULL); | 
 |  | 
 | 	if (http_get_file(url, tmp, NULL) != HTTP_OK) { | 
 | 		error("Unable to get pack index %s", url); | 
 | 		free(tmp); | 
 | 		tmp = NULL; | 
 | 	} | 
 |  | 
 | 	free(url); | 
 | 	return tmp; | 
 | } | 
 |  | 
 | static int fetch_and_setup_pack_index(struct packed_git **packs_head, | 
 | 	unsigned char *sha1, const char *base_url) | 
 | { | 
 | 	struct packed_git *new_pack; | 
 | 	char *tmp_idx = NULL; | 
 | 	int ret; | 
 |  | 
 | 	if (has_pack_index(sha1)) { | 
 | 		new_pack = parse_pack_index(sha1, sha1_pack_index_name(sha1)); | 
 | 		if (!new_pack) | 
 | 			return -1; /* parse_pack_index() already issued error message */ | 
 | 		goto add_pack; | 
 | 	} | 
 |  | 
 | 	tmp_idx = fetch_pack_index(sha1, base_url); | 
 | 	if (!tmp_idx) | 
 | 		return -1; | 
 |  | 
 | 	new_pack = parse_pack_index(sha1, tmp_idx); | 
 | 	if (!new_pack) { | 
 | 		unlink(tmp_idx); | 
 | 		free(tmp_idx); | 
 |  | 
 | 		return -1; /* parse_pack_index() already issued error message */ | 
 | 	} | 
 |  | 
 | 	ret = verify_pack_index(new_pack); | 
 | 	if (!ret) { | 
 | 		close_pack_index(new_pack); | 
 | 		ret = finalize_object_file(tmp_idx, sha1_pack_index_name(sha1)); | 
 | 	} | 
 | 	free(tmp_idx); | 
 | 	if (ret) | 
 | 		return -1; | 
 |  | 
 | add_pack: | 
 | 	new_pack->next = *packs_head; | 
 | 	*packs_head = new_pack; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int http_get_info_packs(const char *base_url, struct packed_git **packs_head) | 
 | { | 
 | 	struct http_get_options options = {0}; | 
 | 	int ret = 0, i = 0; | 
 | 	char *url, *data; | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 | 	unsigned char sha1[20]; | 
 |  | 
 | 	end_url_with_slash(&buf, base_url); | 
 | 	strbuf_addstr(&buf, "objects/info/packs"); | 
 | 	url = strbuf_detach(&buf, NULL); | 
 |  | 
 | 	options.no_cache = 1; | 
 | 	ret = http_get_strbuf(url, &buf, &options); | 
 | 	if (ret != HTTP_OK) | 
 | 		goto cleanup; | 
 |  | 
 | 	data = buf.buf; | 
 | 	while (i < buf.len) { | 
 | 		switch (data[i]) { | 
 | 		case 'P': | 
 | 			i++; | 
 | 			if (i + 52 <= buf.len && | 
 | 			    starts_with(data + i, " pack-") && | 
 | 			    starts_with(data + i + 46, ".pack\n")) { | 
 | 				get_sha1_hex(data + i + 6, sha1); | 
 | 				fetch_and_setup_pack_index(packs_head, sha1, | 
 | 						      base_url); | 
 | 				i += 51; | 
 | 				break; | 
 | 			} | 
 | 		default: | 
 | 			while (i < buf.len && data[i] != '\n') | 
 | 				i++; | 
 | 		} | 
 | 		i++; | 
 | 	} | 
 |  | 
 | cleanup: | 
 | 	free(url); | 
 | 	return ret; | 
 | } | 
 |  | 
 | void release_http_pack_request(struct http_pack_request *preq) | 
 | { | 
 | 	if (preq->packfile != NULL) { | 
 | 		fclose(preq->packfile); | 
 | 		preq->packfile = NULL; | 
 | 	} | 
 | 	preq->slot = NULL; | 
 | 	free(preq->url); | 
 | 	free(preq); | 
 | } | 
 |  | 
 | int finish_http_pack_request(struct http_pack_request *preq) | 
 | { | 
 | 	struct packed_git **lst; | 
 | 	struct packed_git *p = preq->target; | 
 | 	char *tmp_idx; | 
 | 	size_t len; | 
 | 	struct child_process ip = CHILD_PROCESS_INIT; | 
 | 	const char *ip_argv[8]; | 
 |  | 
 | 	close_pack_index(p); | 
 |  | 
 | 	fclose(preq->packfile); | 
 | 	preq->packfile = NULL; | 
 |  | 
 | 	lst = preq->lst; | 
 | 	while (*lst != p) | 
 | 		lst = &((*lst)->next); | 
 | 	*lst = (*lst)->next; | 
 |  | 
 | 	if (!strip_suffix(preq->tmpfile, ".pack.temp", &len)) | 
 | 		die("BUG: pack tmpfile does not end in .pack.temp?"); | 
 | 	tmp_idx = xstrfmt("%.*s.idx.temp", (int)len, preq->tmpfile); | 
 |  | 
 | 	ip_argv[0] = "index-pack"; | 
 | 	ip_argv[1] = "-o"; | 
 | 	ip_argv[2] = tmp_idx; | 
 | 	ip_argv[3] = preq->tmpfile; | 
 | 	ip_argv[4] = NULL; | 
 |  | 
 | 	ip.argv = ip_argv; | 
 | 	ip.git_cmd = 1; | 
 | 	ip.no_stdin = 1; | 
 | 	ip.no_stdout = 1; | 
 |  | 
 | 	if (run_command(&ip)) { | 
 | 		unlink(preq->tmpfile); | 
 | 		unlink(tmp_idx); | 
 | 		free(tmp_idx); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	unlink(sha1_pack_index_name(p->sha1)); | 
 |  | 
 | 	if (finalize_object_file(preq->tmpfile, sha1_pack_name(p->sha1)) | 
 | 	 || finalize_object_file(tmp_idx, sha1_pack_index_name(p->sha1))) { | 
 | 		free(tmp_idx); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	install_packed_git(p); | 
 | 	free(tmp_idx); | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct http_pack_request *new_http_pack_request( | 
 | 	struct packed_git *target, const char *base_url) | 
 | { | 
 | 	off_t prev_posn = 0; | 
 | 	struct strbuf buf = STRBUF_INIT; | 
 | 	struct http_pack_request *preq; | 
 |  | 
 | 	preq = xcalloc(1, sizeof(*preq)); | 
 | 	preq->target = target; | 
 |  | 
 | 	end_url_with_slash(&buf, base_url); | 
 | 	strbuf_addf(&buf, "objects/pack/pack-%s.pack", | 
 | 		sha1_to_hex(target->sha1)); | 
 | 	preq->url = strbuf_detach(&buf, NULL); | 
 |  | 
 | 	snprintf(preq->tmpfile, sizeof(preq->tmpfile), "%s.temp", | 
 | 		sha1_pack_name(target->sha1)); | 
 | 	preq->packfile = fopen(preq->tmpfile, "a"); | 
 | 	if (!preq->packfile) { | 
 | 		error("Unable to open local file %s for pack", | 
 | 		      preq->tmpfile); | 
 | 		goto abort; | 
 | 	} | 
 |  | 
 | 	preq->slot = get_active_slot(); | 
 | 	curl_easy_setopt(preq->slot->curl, CURLOPT_FILE, preq->packfile); | 
 | 	curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite); | 
 | 	curl_easy_setopt(preq->slot->curl, CURLOPT_URL, preq->url); | 
 | 	curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER, | 
 | 		no_pragma_header); | 
 |  | 
 | 	/* | 
 | 	 * If there is data present from a previous transfer attempt, | 
 | 	 * resume where it left off | 
 | 	 */ | 
 | 	prev_posn = ftello(preq->packfile); | 
 | 	if (prev_posn>0) { | 
 | 		if (http_is_verbose) | 
 | 			fprintf(stderr, | 
 | 				"Resuming fetch of pack %s at byte %"PRIuMAX"\n", | 
 | 				sha1_to_hex(target->sha1), (uintmax_t)prev_posn); | 
 | 		http_opt_request_remainder(preq->slot->curl, prev_posn); | 
 | 	} | 
 |  | 
 | 	return preq; | 
 |  | 
 | abort: | 
 | 	free(preq->url); | 
 | 	free(preq); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* Helpers for fetching objects (loose) */ | 
 | static size_t fwrite_sha1_file(char *ptr, size_t eltsize, size_t nmemb, | 
 | 			       void *data) | 
 | { | 
 | 	unsigned char expn[4096]; | 
 | 	size_t size = eltsize * nmemb; | 
 | 	int posn = 0; | 
 | 	struct http_object_request *freq = data; | 
 | 	struct active_request_slot *slot = freq->slot; | 
 |  | 
 | 	if (slot) { | 
 | 		CURLcode c = curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CODE, | 
 | 						&slot->http_code); | 
 | 		if (c != CURLE_OK) | 
 | 			die("BUG: curl_easy_getinfo for HTTP code failed: %s", | 
 | 				curl_easy_strerror(c)); | 
 | 		if (slot->http_code >= 400) | 
 | 			return size; | 
 | 	} | 
 |  | 
 | 	do { | 
 | 		ssize_t retval = xwrite(freq->localfile, | 
 | 					(char *) ptr + posn, size - posn); | 
 | 		if (retval < 0) | 
 | 			return posn; | 
 | 		posn += retval; | 
 | 	} while (posn < size); | 
 |  | 
 | 	freq->stream.avail_in = size; | 
 | 	freq->stream.next_in = (void *)ptr; | 
 | 	do { | 
 | 		freq->stream.next_out = expn; | 
 | 		freq->stream.avail_out = sizeof(expn); | 
 | 		freq->zret = git_inflate(&freq->stream, Z_SYNC_FLUSH); | 
 | 		git_SHA1_Update(&freq->c, expn, | 
 | 				sizeof(expn) - freq->stream.avail_out); | 
 | 	} while (freq->stream.avail_in && freq->zret == Z_OK); | 
 | 	return size; | 
 | } | 
 |  | 
 | struct http_object_request *new_http_object_request(const char *base_url, | 
 | 	unsigned char *sha1) | 
 | { | 
 | 	char *hex = sha1_to_hex(sha1); | 
 | 	const char *filename; | 
 | 	char prevfile[PATH_MAX]; | 
 | 	int prevlocal; | 
 | 	char prev_buf[PREV_BUF_SIZE]; | 
 | 	ssize_t prev_read = 0; | 
 | 	off_t prev_posn = 0; | 
 | 	struct http_object_request *freq; | 
 |  | 
 | 	freq = xcalloc(1, sizeof(*freq)); | 
 | 	hashcpy(freq->sha1, sha1); | 
 | 	freq->localfile = -1; | 
 |  | 
 | 	filename = sha1_file_name(sha1); | 
 | 	snprintf(freq->tmpfile, sizeof(freq->tmpfile), | 
 | 		 "%s.temp", filename); | 
 |  | 
 | 	snprintf(prevfile, sizeof(prevfile), "%s.prev", filename); | 
 | 	unlink_or_warn(prevfile); | 
 | 	rename(freq->tmpfile, prevfile); | 
 | 	unlink_or_warn(freq->tmpfile); | 
 |  | 
 | 	if (freq->localfile != -1) | 
 | 		error("fd leakage in start: %d", freq->localfile); | 
 | 	freq->localfile = open(freq->tmpfile, | 
 | 			       O_WRONLY | O_CREAT | O_EXCL, 0666); | 
 | 	/* | 
 | 	 * This could have failed due to the "lazy directory creation"; | 
 | 	 * try to mkdir the last path component. | 
 | 	 */ | 
 | 	if (freq->localfile < 0 && errno == ENOENT) { | 
 | 		char *dir = strrchr(freq->tmpfile, '/'); | 
 | 		if (dir) { | 
 | 			*dir = 0; | 
 | 			mkdir(freq->tmpfile, 0777); | 
 | 			*dir = '/'; | 
 | 		} | 
 | 		freq->localfile = open(freq->tmpfile, | 
 | 				       O_WRONLY | O_CREAT | O_EXCL, 0666); | 
 | 	} | 
 |  | 
 | 	if (freq->localfile < 0) { | 
 | 		error_errno("Couldn't create temporary file %s", freq->tmpfile); | 
 | 		goto abort; | 
 | 	} | 
 |  | 
 | 	git_inflate_init(&freq->stream); | 
 |  | 
 | 	git_SHA1_Init(&freq->c); | 
 |  | 
 | 	freq->url = get_remote_object_url(base_url, hex, 0); | 
 |  | 
 | 	/* | 
 | 	 * If a previous temp file is present, process what was already | 
 | 	 * fetched. | 
 | 	 */ | 
 | 	prevlocal = open(prevfile, O_RDONLY); | 
 | 	if (prevlocal != -1) { | 
 | 		do { | 
 | 			prev_read = xread(prevlocal, prev_buf, PREV_BUF_SIZE); | 
 | 			if (prev_read>0) { | 
 | 				if (fwrite_sha1_file(prev_buf, | 
 | 						     1, | 
 | 						     prev_read, | 
 | 						     freq) == prev_read) { | 
 | 					prev_posn += prev_read; | 
 | 				} else { | 
 | 					prev_read = -1; | 
 | 				} | 
 | 			} | 
 | 		} while (prev_read > 0); | 
 | 		close(prevlocal); | 
 | 	} | 
 | 	unlink_or_warn(prevfile); | 
 |  | 
 | 	/* | 
 | 	 * Reset inflate/SHA1 if there was an error reading the previous temp | 
 | 	 * file; also rewind to the beginning of the local file. | 
 | 	 */ | 
 | 	if (prev_read == -1) { | 
 | 		memset(&freq->stream, 0, sizeof(freq->stream)); | 
 | 		git_inflate_init(&freq->stream); | 
 | 		git_SHA1_Init(&freq->c); | 
 | 		if (prev_posn>0) { | 
 | 			prev_posn = 0; | 
 | 			lseek(freq->localfile, 0, SEEK_SET); | 
 | 			if (ftruncate(freq->localfile, 0) < 0) { | 
 | 				error_errno("Couldn't truncate temporary file %s", | 
 | 					    freq->tmpfile); | 
 | 				goto abort; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	freq->slot = get_active_slot(); | 
 |  | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_FILE, freq); | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_FAILONERROR, 0); | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite_sha1_file); | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_ERRORBUFFER, freq->errorstr); | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_URL, freq->url); | 
 | 	curl_easy_setopt(freq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header); | 
 |  | 
 | 	/* | 
 | 	 * If we have successfully processed data from a previous fetch | 
 | 	 * attempt, only fetch the data we don't already have. | 
 | 	 */ | 
 | 	if (prev_posn>0) { | 
 | 		if (http_is_verbose) | 
 | 			fprintf(stderr, | 
 | 				"Resuming fetch of object %s at byte %"PRIuMAX"\n", | 
 | 				hex, (uintmax_t)prev_posn); | 
 | 		http_opt_request_remainder(freq->slot->curl, prev_posn); | 
 | 	} | 
 |  | 
 | 	return freq; | 
 |  | 
 | abort: | 
 | 	free(freq->url); | 
 | 	free(freq); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | void process_http_object_request(struct http_object_request *freq) | 
 | { | 
 | 	if (freq->slot == NULL) | 
 | 		return; | 
 | 	freq->curl_result = freq->slot->curl_result; | 
 | 	freq->http_code = freq->slot->http_code; | 
 | 	freq->slot = NULL; | 
 | } | 
 |  | 
 | int finish_http_object_request(struct http_object_request *freq) | 
 | { | 
 | 	struct stat st; | 
 |  | 
 | 	close(freq->localfile); | 
 | 	freq->localfile = -1; | 
 |  | 
 | 	process_http_object_request(freq); | 
 |  | 
 | 	if (freq->http_code == 416) { | 
 | 		warning("requested range invalid; we may already have all the data."); | 
 | 	} else if (freq->curl_result != CURLE_OK) { | 
 | 		if (stat(freq->tmpfile, &st) == 0) | 
 | 			if (st.st_size == 0) | 
 | 				unlink_or_warn(freq->tmpfile); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	git_inflate_end(&freq->stream); | 
 | 	git_SHA1_Final(freq->real_sha1, &freq->c); | 
 | 	if (freq->zret != Z_STREAM_END) { | 
 | 		unlink_or_warn(freq->tmpfile); | 
 | 		return -1; | 
 | 	} | 
 | 	if (hashcmp(freq->sha1, freq->real_sha1)) { | 
 | 		unlink_or_warn(freq->tmpfile); | 
 | 		return -1; | 
 | 	} | 
 | 	freq->rename = | 
 | 		finalize_object_file(freq->tmpfile, sha1_file_name(freq->sha1)); | 
 |  | 
 | 	return freq->rename; | 
 | } | 
 |  | 
 | void abort_http_object_request(struct http_object_request *freq) | 
 | { | 
 | 	unlink_or_warn(freq->tmpfile); | 
 |  | 
 | 	release_http_object_request(freq); | 
 | } | 
 |  | 
 | void release_http_object_request(struct http_object_request *freq) | 
 | { | 
 | 	if (freq->localfile != -1) { | 
 | 		close(freq->localfile); | 
 | 		freq->localfile = -1; | 
 | 	} | 
 | 	if (freq->url != NULL) { | 
 | 		free(freq->url); | 
 | 		freq->url = NULL; | 
 | 	} | 
 | 	if (freq->slot != NULL) { | 
 | 		freq->slot->callback_func = NULL; | 
 | 		freq->slot->callback_data = NULL; | 
 | 		release_active_slot(freq->slot); | 
 | 		freq->slot = NULL; | 
 | 	} | 
 | } |