| /* | |
| * Copyright 2008 Peter Harris <git@peter.is-a-geek.org> | |
| */ | |
| #undef NOGDI | |
| #include "../git-compat-util.h" | |
| #include <wingdi.h> | |
| #include <winreg.h> | |
| /* | |
| ANSI codes used by git: m, K | |
| This file is git-specific. Therefore, this file does not attempt | |
| to implement any codes that are not used by git. | |
| */ | |
| static HANDLE console; | |
| static WORD plain_attr; | |
| static WORD attr; | |
| static int negative; | |
| static int non_ascii_used = 0; | |
| static HANDLE hthread, hread, hwrite; | |
| static HANDLE hconsole1, hconsole2; | |
| #ifdef __MINGW32__ | |
| typedef struct _CONSOLE_FONT_INFOEX { | |
| ULONG cbSize; | |
| DWORD nFont; | |
| COORD dwFontSize; | |
| UINT FontFamily; | |
| UINT FontWeight; | |
| WCHAR FaceName[LF_FACESIZE]; | |
| } CONSOLE_FONT_INFOEX, *PCONSOLE_FONT_INFOEX; | |
| #endif | |
| typedef BOOL (WINAPI *PGETCURRENTCONSOLEFONTEX)(HANDLE, BOOL, | |
| PCONSOLE_FONT_INFOEX); | |
| static void warn_if_raster_font(void) | |
| { | |
| DWORD fontFamily = 0; | |
| PGETCURRENTCONSOLEFONTEX pGetCurrentConsoleFontEx; | |
| /* don't bother if output was ascii only */ | |
| if (!non_ascii_used) | |
| return; | |
| /* GetCurrentConsoleFontEx is available since Vista */ | |
| pGetCurrentConsoleFontEx = (PGETCURRENTCONSOLEFONTEX) GetProcAddress( | |
| GetModuleHandle("kernel32.dll"), | |
| "GetCurrentConsoleFontEx"); | |
| if (pGetCurrentConsoleFontEx) { | |
| CONSOLE_FONT_INFOEX cfi; | |
| cfi.cbSize = sizeof(cfi); | |
| if (pGetCurrentConsoleFontEx(console, 0, &cfi)) | |
| fontFamily = cfi.FontFamily; | |
| } else { | |
| /* pre-Vista: check default console font in registry */ | |
| HKEY hkey; | |
| if (ERROR_SUCCESS == RegOpenKeyExA(HKEY_CURRENT_USER, "Console", | |
| 0, KEY_READ, &hkey)) { | |
| DWORD size = sizeof(fontFamily); | |
| RegQueryValueExA(hkey, "FontFamily", NULL, NULL, | |
| (LPVOID) &fontFamily, &size); | |
| RegCloseKey(hkey); | |
| } | |
| } | |
| if (!(fontFamily & TMPF_TRUETYPE)) { | |
| const wchar_t *msg = L"\nWarning: Your console font probably " | |
| L"doesn\'t support Unicode. If you experience strange " | |
| L"characters in the output, consider switching to a " | |
| L"TrueType font such as Consolas!\n"; | |
| DWORD dummy; | |
| WriteConsoleW(console, msg, wcslen(msg), &dummy, NULL); | |
| } | |
| } | |
| static int is_console(int fd) | |
| { | |
| CONSOLE_SCREEN_BUFFER_INFO sbi; | |
| HANDLE hcon; | |
| static int initialized = 0; | |
| /* get OS handle of the file descriptor */ | |
| hcon = (HANDLE) _get_osfhandle(fd); | |
| if (hcon == INVALID_HANDLE_VALUE) | |
| return 0; | |
| /* check if its a device (i.e. console, printer, serial port) */ | |
| if (GetFileType(hcon) != FILE_TYPE_CHAR) | |
| return 0; | |
| /* check if its a handle to a console output screen buffer */ | |
| if (!GetConsoleScreenBufferInfo(hcon, &sbi)) | |
| return 0; | |
| /* initialize attributes */ | |
| if (!initialized) { | |
| console = hcon; | |
| attr = plain_attr = sbi.wAttributes; | |
| negative = 0; | |
| initialized = 1; | |
| } | |
| return 1; | |
| } | |
| #define BUFFER_SIZE 4096 | |
| #define MAX_PARAMS 16 | |
| static void write_console(unsigned char *str, size_t len) | |
| { | |
| /* only called from console_thread, so a static buffer will do */ | |
| static wchar_t wbuf[2 * BUFFER_SIZE + 1]; | |
| DWORD dummy; | |
| /* convert utf-8 to utf-16 */ | |
| int wlen = xutftowcsn(wbuf, (char*) str, ARRAY_SIZE(wbuf), len); | |
| /* write directly to console */ | |
| WriteConsoleW(console, wbuf, wlen, &dummy, NULL); | |
| /* remember if non-ascii characters are printed */ | |
| if (wlen != len) | |
| non_ascii_used = 1; | |
| } | |
| #define FOREGROUND_ALL (FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE) | |
| #define BACKGROUND_ALL (BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE) | |
| static void set_console_attr(void) | |
| { | |
| WORD attributes = attr; | |
| if (negative) { | |
| attributes &= ~FOREGROUND_ALL; | |
| attributes &= ~BACKGROUND_ALL; | |
| /* This could probably use a bitmask | |
| instead of a series of ifs */ | |
| if (attr & FOREGROUND_RED) | |
| attributes |= BACKGROUND_RED; | |
| if (attr & FOREGROUND_GREEN) | |
| attributes |= BACKGROUND_GREEN; | |
| if (attr & FOREGROUND_BLUE) | |
| attributes |= BACKGROUND_BLUE; | |
| if (attr & BACKGROUND_RED) | |
| attributes |= FOREGROUND_RED; | |
| if (attr & BACKGROUND_GREEN) | |
| attributes |= FOREGROUND_GREEN; | |
| if (attr & BACKGROUND_BLUE) | |
| attributes |= FOREGROUND_BLUE; | |
| } | |
| SetConsoleTextAttribute(console, attributes); | |
| } | |
| static void erase_in_line(void) | |
| { | |
| CONSOLE_SCREEN_BUFFER_INFO sbi; | |
| DWORD dummy; /* Needed for Windows 7 (or Vista) regression */ | |
| if (!console) | |
| return; | |
| GetConsoleScreenBufferInfo(console, &sbi); | |
| FillConsoleOutputCharacterA(console, ' ', | |
| sbi.dwSize.X - sbi.dwCursorPosition.X, sbi.dwCursorPosition, | |
| &dummy); | |
| } | |
| static void set_attr(char func, const int *params, int paramlen) | |
| { | |
| int i; | |
| switch (func) { | |
| case 'm': | |
| for (i = 0; i < paramlen; i++) { | |
| switch (params[i]) { | |
| case 0: /* reset */ | |
| attr = plain_attr; | |
| negative = 0; | |
| break; | |
| case 1: /* bold */ | |
| attr |= FOREGROUND_INTENSITY; | |
| break; | |
| case 2: /* faint */ | |
| case 22: /* normal */ | |
| attr &= ~FOREGROUND_INTENSITY; | |
| break; | |
| case 3: /* italic */ | |
| /* Unsupported */ | |
| break; | |
| case 4: /* underline */ | |
| case 21: /* double underline */ | |
| /* Wikipedia says this flag does nothing */ | |
| /* Furthermore, mingw doesn't define this flag | |
| attr |= COMMON_LVB_UNDERSCORE; */ | |
| break; | |
| case 24: /* no underline */ | |
| /* attr &= ~COMMON_LVB_UNDERSCORE; */ | |
| break; | |
| case 5: /* slow blink */ | |
| case 6: /* fast blink */ | |
| /* We don't have blink, but we do have | |
| background intensity */ | |
| attr |= BACKGROUND_INTENSITY; | |
| break; | |
| case 25: /* no blink */ | |
| attr &= ~BACKGROUND_INTENSITY; | |
| break; | |
| case 7: /* negative */ | |
| negative = 1; | |
| break; | |
| case 27: /* positive */ | |
| negative = 0; | |
| break; | |
| case 8: /* conceal */ | |
| case 28: /* reveal */ | |
| /* Unsupported */ | |
| break; | |
| case 30: /* Black */ | |
| attr &= ~FOREGROUND_ALL; | |
| break; | |
| case 31: /* Red */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_RED; | |
| break; | |
| case 32: /* Green */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_GREEN; | |
| break; | |
| case 33: /* Yellow */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_RED | FOREGROUND_GREEN; | |
| break; | |
| case 34: /* Blue */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_BLUE; | |
| break; | |
| case 35: /* Magenta */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_RED | FOREGROUND_BLUE; | |
| break; | |
| case 36: /* Cyan */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= FOREGROUND_GREEN | FOREGROUND_BLUE; | |
| break; | |
| case 37: /* White */ | |
| attr |= FOREGROUND_RED | | |
| FOREGROUND_GREEN | | |
| FOREGROUND_BLUE; | |
| break; | |
| case 38: /* Unknown */ | |
| break; | |
| case 39: /* reset */ | |
| attr &= ~FOREGROUND_ALL; | |
| attr |= (plain_attr & FOREGROUND_ALL); | |
| break; | |
| case 40: /* Black */ | |
| attr &= ~BACKGROUND_ALL; | |
| break; | |
| case 41: /* Red */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_RED; | |
| break; | |
| case 42: /* Green */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_GREEN; | |
| break; | |
| case 43: /* Yellow */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_RED | BACKGROUND_GREEN; | |
| break; | |
| case 44: /* Blue */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_BLUE; | |
| break; | |
| case 45: /* Magenta */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_RED | BACKGROUND_BLUE; | |
| break; | |
| case 46: /* Cyan */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= BACKGROUND_GREEN | BACKGROUND_BLUE; | |
| break; | |
| case 47: /* White */ | |
| attr |= BACKGROUND_RED | | |
| BACKGROUND_GREEN | | |
| BACKGROUND_BLUE; | |
| break; | |
| case 48: /* Unknown */ | |
| break; | |
| case 49: /* reset */ | |
| attr &= ~BACKGROUND_ALL; | |
| attr |= (plain_attr & BACKGROUND_ALL); | |
| break; | |
| default: | |
| /* Unsupported code */ | |
| break; | |
| } | |
| } | |
| set_console_attr(); | |
| break; | |
| case 'K': | |
| erase_in_line(); | |
| break; | |
| default: | |
| /* Unsupported code */ | |
| break; | |
| } | |
| } | |
| enum { | |
| TEXT = 0, ESCAPE = 033, BRACKET = '[' | |
| }; | |
| static DWORD WINAPI console_thread(LPVOID unused) | |
| { | |
| unsigned char buffer[BUFFER_SIZE]; | |
| DWORD bytes; | |
| int start, end = 0, c, parampos = 0, state = TEXT; | |
| int params[MAX_PARAMS]; | |
| while (1) { | |
| /* read next chunk of bytes from the pipe */ | |
| if (!ReadFile(hread, buffer + end, BUFFER_SIZE - end, &bytes, | |
| NULL)) { | |
| /* exit if pipe has been closed or disconnected */ | |
| if (GetLastError() == ERROR_PIPE_NOT_CONNECTED || | |
| GetLastError() == ERROR_BROKEN_PIPE) | |
| break; | |
| /* ignore other errors */ | |
| continue; | |
| } | |
| /* scan the bytes and handle ANSI control codes */ | |
| bytes += end; | |
| start = end = 0; | |
| while (end < bytes) { | |
| c = buffer[end++]; | |
| switch (state) { | |
| case TEXT: | |
| if (c == ESCAPE) { | |
| /* print text seen so far */ | |
| if (end - 1 > start) | |
| write_console(buffer + start, | |
| end - 1 - start); | |
| /* then start parsing escape sequence */ | |
| start = end - 1; | |
| memset(params, 0, sizeof(params)); | |
| parampos = 0; | |
| state = ESCAPE; | |
| } | |
| break; | |
| case ESCAPE: | |
| /* continue if "\033[", otherwise bail out */ | |
| state = (c == BRACKET) ? BRACKET : TEXT; | |
| break; | |
| case BRACKET: | |
| /* parse [0-9;]* into array of parameters */ | |
| if (c >= '0' && c <= '9') { | |
| params[parampos] *= 10; | |
| params[parampos] += c - '0'; | |
| } else if (c == ';') { | |
| /* | |
| * next parameter, bail out if out of | |
| * bounds | |
| */ | |
| parampos++; | |
| if (parampos >= MAX_PARAMS) | |
| state = TEXT; | |
| } else { | |
| /* | |
| * end of escape sequence, change | |
| * console attributes | |
| */ | |
| set_attr(c, params, parampos + 1); | |
| start = end; | |
| state = TEXT; | |
| } | |
| break; | |
| } | |
| } | |
| /* print remaining text unless parsing an escape sequence */ | |
| if (state == TEXT && end > start) { | |
| /* check for incomplete UTF-8 sequences and fix end */ | |
| if (buffer[end - 1] >= 0x80) { | |
| if (buffer[end -1] >= 0xc0) | |
| end--; | |
| else if (end - 1 > start && | |
| buffer[end - 2] >= 0xe0) | |
| end -= 2; | |
| else if (end - 2 > start && | |
| buffer[end - 3] >= 0xf0) | |
| end -= 3; | |
| } | |
| /* print remaining complete UTF-8 sequences */ | |
| if (end > start) | |
| write_console(buffer + start, end - start); | |
| /* move remaining bytes to the front */ | |
| if (end < bytes) | |
| memmove(buffer, buffer + end, bytes - end); | |
| end = bytes - end; | |
| } else { | |
| /* all data has been consumed, mark buffer empty */ | |
| end = 0; | |
| } | |
| } | |
| /* check if the console font supports unicode */ | |
| warn_if_raster_font(); | |
| CloseHandle(hread); | |
| return 0; | |
| } | |
| static void winansi_exit(void) | |
| { | |
| /* flush all streams */ | |
| _flushall(); | |
| /* signal console thread to exit */ | |
| FlushFileBuffers(hwrite); | |
| DisconnectNamedPipe(hwrite); | |
| /* wait for console thread to copy remaining data */ | |
| WaitForSingleObject(hthread, INFINITE); | |
| /* cleanup handles... */ | |
| CloseHandle(hwrite); | |
| CloseHandle(hthread); | |
| } | |
| static void die_lasterr(const char *fmt, ...) | |
| { | |
| va_list params; | |
| va_start(params, fmt); | |
| errno = err_win_to_posix(GetLastError()); | |
| die_errno(fmt, params); | |
| va_end(params); | |
| } | |
| static HANDLE duplicate_handle(HANDLE hnd) | |
| { | |
| HANDLE hresult, hproc = GetCurrentProcess(); | |
| if (!DuplicateHandle(hproc, hnd, hproc, &hresult, 0, TRUE, | |
| DUPLICATE_SAME_ACCESS)) | |
| die_lasterr("DuplicateHandle(%li) failed", (long) hnd); | |
| return hresult; | |
| } | |
| /* | |
| * Make MSVCRT's internal file descriptor control structure accessible | |
| * so that we can tweak OS handles and flags directly (we need MSVCRT | |
| * to treat our pipe handle as if it were a console). | |
| * | |
| * We assume that the ioinfo structure (exposed by MSVCRT.dll via | |
| * __pioinfo) starts with the OS handle and the flags. The exact size | |
| * varies between MSVCRT versions, so we try different sizes until | |
| * toggling the FDEV bit of _pioinfo(1)->osflags is reflected in | |
| * isatty(1). | |
| */ | |
| typedef struct { | |
| HANDLE osfhnd; | |
| char osflags; | |
| } ioinfo; | |
| extern __declspec(dllimport) ioinfo *__pioinfo[]; | |
| static size_t sizeof_ioinfo = 0; | |
| #define IOINFO_L2E 5 | |
| #define IOINFO_ARRAY_ELTS (1 << IOINFO_L2E) | |
| #define FDEV 0x40 | |
| static inline ioinfo* _pioinfo(int fd) | |
| { | |
| return (ioinfo*)((char*)__pioinfo[fd >> IOINFO_L2E] + | |
| (fd & (IOINFO_ARRAY_ELTS - 1)) * sizeof_ioinfo); | |
| } | |
| static int init_sizeof_ioinfo() | |
| { | |
| int istty, wastty; | |
| /* don't init twice */ | |
| if (sizeof_ioinfo) | |
| return sizeof_ioinfo >= 256; | |
| sizeof_ioinfo = sizeof(ioinfo); | |
| wastty = isatty(1); | |
| while (sizeof_ioinfo < 256) { | |
| /* toggle FDEV flag, check isatty, then toggle back */ | |
| _pioinfo(1)->osflags ^= FDEV; | |
| istty = isatty(1); | |
| _pioinfo(1)->osflags ^= FDEV; | |
| /* return if we found the correct size */ | |
| if (istty != wastty) | |
| return 0; | |
| sizeof_ioinfo += sizeof(void*); | |
| } | |
| error("Tweaking file descriptors doesn't work with this MSVCRT.dll"); | |
| return 1; | |
| } | |
| static HANDLE swap_osfhnd(int fd, HANDLE new_handle) | |
| { | |
| ioinfo *pioinfo; | |
| HANDLE old_handle; | |
| /* init ioinfo size if we haven't done so */ | |
| if (init_sizeof_ioinfo()) | |
| return INVALID_HANDLE_VALUE; | |
| /* get ioinfo pointer and change the handles */ | |
| pioinfo = _pioinfo(fd); | |
| old_handle = pioinfo->osfhnd; | |
| pioinfo->osfhnd = new_handle; | |
| return old_handle; | |
| } | |
| void winansi_init(void) | |
| { | |
| int con1, con2; | |
| char name[32]; | |
| /* check if either stdout or stderr is a console output screen buffer */ | |
| con1 = is_console(1); | |
| con2 = is_console(2); | |
| if (!con1 && !con2) | |
| return; | |
| /* create a named pipe to communicate with the console thread */ | |
| sprintf(name, "\\\\.\\pipe\\winansi%lu", GetCurrentProcessId()); | |
| hwrite = CreateNamedPipe(name, PIPE_ACCESS_OUTBOUND, | |
| PIPE_TYPE_BYTE | PIPE_WAIT, 1, BUFFER_SIZE, 0, 0, NULL); | |
| if (hwrite == INVALID_HANDLE_VALUE) | |
| die_lasterr("CreateNamedPipe failed"); | |
| hread = CreateFile(name, GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL); | |
| if (hread == INVALID_HANDLE_VALUE) | |
| die_lasterr("CreateFile for named pipe failed"); | |
| /* start console spool thread on the pipe's read end */ | |
| hthread = CreateThread(NULL, 0, console_thread, NULL, 0, NULL); | |
| if (hthread == INVALID_HANDLE_VALUE) | |
| die_lasterr("CreateThread(console_thread) failed"); | |
| /* schedule cleanup routine */ | |
| if (atexit(winansi_exit)) | |
| die_errno("atexit(winansi_exit) failed"); | |
| /* redirect stdout / stderr to the pipe */ | |
| if (con1) | |
| hconsole1 = swap_osfhnd(1, duplicate_handle(hwrite)); | |
| if (con2) | |
| hconsole2 = swap_osfhnd(2, duplicate_handle(hwrite)); | |
| } | |
| /* | |
| * Returns the real console handle if stdout / stderr is a pipe redirecting | |
| * to the console. Allows spawn / exec to pass the console to the next process. | |
| */ | |
| HANDLE winansi_get_osfhandle(int fd) | |
| { | |
| HANDLE hnd = (HANDLE) _get_osfhandle(fd); | |
| if ((fd == 1 || fd == 2) && isatty(fd) | |
| && GetFileType(hnd) == FILE_TYPE_PIPE) | |
| return (fd == 1) ? hconsole1 : hconsole2; | |
| return hnd; | |
| } |