t/t3404-rebase-interactive.sh

#!/bin/sh
#
# Copyright (c) 2007 Johannes E. Schindelin
#

test_description='git rebase interactive

This test runs git rebase "interactively", by faking an edit, and verifies
that the result still makes sense.
'
. ./test-lib.sh

. ../lib-rebase.sh

set_fake_editor

# set up two branches like this:
#
# A - B - C - D - E
#   \
#     F - G - H
#       \
#         I
#
# where B, D and G touch the same file.

test_expect_success 'setup' '
	: > file1 &&
	git add file1 &&
	test_tick &&
	git commit -m A &&
	git tag A &&
	echo 1 > file1 &&
	test_tick &&
	git commit -m B file1 &&
	: > file2 &&
	git add file2 &&
	test_tick &&
	git commit -m C &&
	echo 2 > file1 &&
	test_tick &&
	git commit -m D file1 &&
	: > file3 &&
	git add file3 &&
	test_tick &&
	git commit -m E &&
	git checkout -b branch1 A &&
	: > file4 &&
	git add file4 &&
	test_tick &&
	git commit -m F &&
	git tag F &&
	echo 3 > file1 &&
	test_tick &&
	git commit -m G file1 &&
	: > file5 &&
	git add file5 &&
	test_tick &&
	git commit -m H &&
	git checkout -b branch2 F &&
	: > file6 &&
	git add file6 &&
	test_tick &&
	git commit -m I &&
	git tag I
'

test_expect_success 'no changes are a nop' '
	git rebase -i F &&
	test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
	test $(git rev-parse I) = $(git rev-parse HEAD)
'

test_expect_success 'test the [branch] option' '
	git checkout -b dead-end &&
	git rm file6 &&
	git commit -m "stop here" &&
	git rebase -i F branch2 &&
	test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
	test $(git rev-parse I) = $(git rev-parse branch2) &&
	test $(git rev-parse I) = $(git rev-parse HEAD)
'

test_expect_success 'test --onto <branch>' '
	git checkout -b test-onto branch2 &&
	git rebase -i --onto branch1 F &&
	test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" &&
	test $(git rev-parse HEAD^) = $(git rev-parse branch1) &&
	test $(git rev-parse I) = $(git rev-parse branch2)
'

test_expect_success 'rebase on top of a non-conflicting commit' '
	git checkout branch1 &&
	git tag original-branch1 &&
	git rebase -i branch2 &&
	test file6 = $(git diff --name-only original-branch1) &&
	test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
	test $(git rev-parse I) = $(git rev-parse branch2) &&
	test $(git rev-parse I) = $(git rev-parse HEAD~2)
'

test_expect_success 'reflog for the branch shows state before rebase' '
	test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1)
'

test_expect_success 'exchange two commits' '
	FAKE_LINES="2 1" git rebase -i HEAD~2 &&
	test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
	test G = $(git cat-file commit HEAD | sed -ne \$p)
'

cat > expect << EOF
diff --git a/file1 b/file1
index e69de29..00750ed 100644
--- a/file1
+++ b/file1
@@ -0,0 +1 @@
+3
EOF

cat > expect2 << EOF
<<<<<<< HEAD:file1
2
=======
3
>>>>>>> b7ca976... G:file1
EOF

test_expect_success 'stop on conflicting pick' '
	git tag new-branch1 &&
	test_must_fail git rebase -i master &&
	test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" &&
	test_cmp expect .git/rebase-merge/patch &&
	test_cmp expect2 file1 &&
	test "$(git diff --name-status |
		sed -n -e "/^U/s/^U[^a-z]*//p")" = file1 &&
	test 4 = $(grep -v "^#" < .git/rebase-merge/done | wc -l) &&
	test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo)
'

test_expect_success 'abort' '
	git rebase --abort &&
	test $(git rev-parse new-branch1) = $(git rev-parse HEAD) &&
	test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
	! test -d .git/rebase-merge
'

test_expect_success 'retain authorship' '
	echo A > file7 &&
	git add file7 &&
	test_tick &&
	GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" &&
	git tag twerp &&
	git rebase -i --onto master HEAD^ &&
	git show HEAD | grep "^Author: Twerp Snog"
'

test_expect_success 'squash' '
	git reset --hard twerp &&
	echo B > file7 &&
	test_tick &&
	GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 &&
	echo "******************************" &&
	FAKE_LINES="1 squash 2" git rebase -i --onto master HEAD~2 &&
	test B = $(cat file7) &&
	test $(git rev-parse HEAD^) = $(git rev-parse master)
'

test_expect_success 'retain authorship when squashing' '
	git show HEAD | grep "^Author: Twerp Snog"
'

test_expect_success '-p handles "no changes" gracefully' '
	HEAD=$(git rev-parse HEAD) &&
	git rebase -i -p HEAD^ &&
	git update-index --refresh &&
	git diff-files --quiet &&
	git diff-index --quiet --cached HEAD -- &&
	test $HEAD = $(git rev-parse HEAD)
'

test_expect_success 'preserve merges with -p' '
	git checkout -b to-be-preserved master^ &&
	: > unrelated-file &&
	git add unrelated-file &&
	test_tick &&
	git commit -m "unrelated" &&
	git checkout -b another-branch master &&
	echo B > file1 &&
	test_tick &&
	git commit -m J file1 &&
	test_tick &&
	git merge to-be-preserved &&
	echo C > file1 &&
	test_tick &&
	git commit -m K file1 &&
	echo D > file1 &&
	test_tick &&
	git commit -m L1 file1 &&
	git checkout HEAD^ &&
	echo 1 > unrelated-file &&
	test_tick &&
	git commit -m L2 unrelated-file &&
	test_tick &&
	git merge another-branch &&
	echo E > file1 &&
	test_tick &&
	git commit -m M file1 &&
	git checkout -b to-be-rebased &&
	test_tick &&
	git rebase -i -p --onto branch1 master &&
	git update-index --refresh &&
	git diff-files --quiet &&
	git diff-index --quiet --cached HEAD -- &&
	test $(git rev-parse HEAD~6) = $(git rev-parse branch1) &&
	test $(git rev-parse HEAD~4^2) = $(git rev-parse to-be-preserved) &&
	test $(git rev-parse HEAD^^2^) = $(git rev-parse HEAD^^^) &&
	test $(git show HEAD~5:file1) = B &&
	test $(git show HEAD~3:file1) = C &&
	test $(git show HEAD:file1) = E &&
	test $(git show HEAD:unrelated-file) = 1
'

test_expect_success 'edit ancestor with -p' '
	FAKE_LINES="1 edit 2 3 4" git rebase -i -p HEAD~3 &&
	echo 2 > unrelated-file &&
	test_tick &&
	git commit -m L2-modified --amend unrelated-file &&
	git rebase --continue &&
	git update-index --refresh &&
	git diff-files --quiet &&
	git diff-index --quiet --cached HEAD -- &&
	test $(git show HEAD:unrelated-file) = 2
'

test_expect_success '--continue tries to commit' '
	test_tick &&
	test_must_fail git rebase -i --onto new-branch1 HEAD^ &&
	echo resolved > file1 &&
	git add file1 &&
	FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue &&
	test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) &&
	git show HEAD | grep chouette
'

test_expect_success 'verbose flag is heeded, even after --continue' '
	git reset --hard HEAD@{1} &&
	test_tick &&
	test_must_fail git rebase -v -i --onto new-branch1 HEAD^ &&
	echo resolved > file1 &&
	git add file1 &&
	git rebase --continue > output &&
	grep "^ file1 |    2 +-$" output
'

test_expect_success 'multi-squash only fires up editor once' '
	base=$(git rev-parse HEAD~4) &&
	FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \
		git rebase -i $base &&
	test $base = $(git rev-parse HEAD^) &&
	test 1 = $(git show | grep ONCE | wc -l)
'

test_expect_success 'squash works as expected' '
	for n in one two three four
	do
		echo $n >> file$n &&
		git add file$n &&
		git commit -m $n
	done &&
	one=$(git rev-parse HEAD~3) &&
	FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 &&
	test $one = $(git rev-parse HEAD~2)
'

test_expect_success 'interrupted squash works as expected' '
	for n in one two three four
	do
		echo $n >> conflict &&
		git add conflict &&
		git commit -m $n
	done &&
	one=$(git rev-parse HEAD~3) &&
	(
		FAKE_LINES="1 squash 3 2" &&
		export FAKE_LINES &&
		test_must_fail git rebase -i HEAD~3
	) &&
	(echo one; echo two; echo four) > conflict &&
	git add conflict &&
	test_must_fail git rebase --continue &&
	echo resolved > conflict &&
	git add conflict &&
	git rebase --continue &&
	test $one = $(git rev-parse HEAD~2)
'

test_expect_success 'interrupted squash works as expected (case 2)' '
	for n in one two three four
	do
		echo $n >> conflict &&
		git add conflict &&
		git commit -m $n
	done &&
	one=$(git rev-parse HEAD~3) &&
	(
		FAKE_LINES="3 squash 1 2" &&
		export FAKE_LINES &&
		test_must_fail git rebase -i HEAD~3
	) &&
	(echo one; echo four) > conflict &&
	git add conflict &&
	test_must_fail git rebase --continue &&
	(echo one; echo two; echo four) > conflict &&
	git add conflict &&
	test_must_fail git rebase --continue &&
	echo resolved > conflict &&
	git add conflict &&
	git rebase --continue &&
	test $one = $(git rev-parse HEAD~2)
'

test_expect_success 'ignore patch if in upstream' '
	HEAD=$(git rev-parse HEAD) &&
	git checkout -b has-cherry-picked HEAD^ &&
	echo unrelated > file7 &&
	git add file7 &&
	test_tick &&
	git commit -m "unrelated change" &&
	git cherry-pick $HEAD &&
	EXPECT_COUNT=1 git rebase -i $HEAD &&
	test $HEAD = $(git rev-parse HEAD^)
'

test_expect_success '--continue tries to commit, even for "edit"' '
	parent=$(git rev-parse HEAD^) &&
	test_tick &&
	FAKE_LINES="edit 1" git rebase -i HEAD^ &&
	echo edited > file7 &&
	git add file7 &&
	FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue &&
	test edited = $(git show HEAD:file7) &&
	git show HEAD | grep chouette &&
	test $parent = $(git rev-parse HEAD^)
'

test_expect_success 'aborted --continue does not squash commits after "edit"' '
	old=$(git rev-parse HEAD) &&
	test_tick &&
	FAKE_LINES="edit 1" git rebase -i HEAD^ &&
	echo "edited again" > file7 &&
	git add file7 &&
	(
		FAKE_COMMIT_MESSAGE=" " &&
		export FAKE_COMMIT_MESSAGE &&
		test_must_fail git rebase --continue
	) &&
	test $old = $(git rev-parse HEAD) &&
	git rebase --abort
'

test_expect_success 'auto-amend only edited commits after "edit"' '
	test_tick &&
	FAKE_LINES="edit 1" git rebase -i HEAD^ &&
	echo "edited again" > file7 &&
	git add file7 &&
	FAKE_COMMIT_MESSAGE="edited file7 again" git commit &&
	echo "and again" > file7 &&
	git add file7 &&
	test_tick &&
	(
		FAKE_COMMIT_MESSAGE="and again" &&
		export FAKE_COMMIT_MESSAGE &&
		test_must_fail git rebase --continue
	) &&
	git rebase --abort
'

test_expect_success 'rebase a detached HEAD' '
	grandparent=$(git rev-parse HEAD~2) &&
	git checkout $(git rev-parse HEAD) &&
	test_tick &&
	FAKE_LINES="2 1" git rebase -i HEAD~2 &&
	test $grandparent = $(git rev-parse HEAD~2)
'

test_expect_success 'rebase a commit violating pre-commit' '

	mkdir -p .git/hooks &&
	PRE_COMMIT=.git/hooks/pre-commit &&
	echo "#!/bin/sh" > $PRE_COMMIT &&
	echo "test -z \"\$(git diff --cached --check)\"" >> $PRE_COMMIT &&
	chmod a+x $PRE_COMMIT &&
	echo "monde! " >> file1 &&
	test_tick &&
	test_must_fail git commit -m doesnt-verify file1 &&
	git commit -m doesnt-verify --no-verify file1 &&
	test_tick &&
	FAKE_LINES=2 git rebase -i HEAD~2

'

test_expect_success 'rebase with a file named HEAD in worktree' '

	rm -fr .git/hooks &&
	git reset --hard &&
	git checkout -b branch3 A &&

	(
		GIT_AUTHOR_NAME="Squashed Away" &&
		export GIT_AUTHOR_NAME &&
		>HEAD &&
		git add HEAD &&
		git commit -m "Add head" &&
		>BODY &&
		git add BODY &&
		git commit -m "Add body"
	) &&

	FAKE_LINES="1 squash 2" git rebase -i to-be-rebased &&
	test "$(git show -s --pretty=format:%an)" = "Squashed Away"

'

test_expect_success 'do "noop" when there is nothing to cherry-pick' '

	git checkout -b branch4 HEAD &&
	GIT_EDITOR=: git commit --amend \
		--author="Somebody else <somebody@else.com>" 
	test $(git rev-parse branch3) != $(git rev-parse branch4) &&
	git rebase -i branch3 &&
	test $(git rev-parse branch3) = $(git rev-parse branch4)

'

test_expect_success 'submodule rebase setup' '
	git checkout A &&
	mkdir sub &&
	(
		cd sub && git init && >elif &&
		git add elif && git commit -m "submodule initial"
	) &&
	echo 1 >file1 &&
	git add file1 sub
	test_tick &&
	git commit -m "One" &&
	echo 2 >file1 &&
	test_tick &&
	git commit -a -m "Two" &&
	(
		cd sub && echo 3 >elif &&
		git commit -a -m "submodule second"
	) &&
	test_tick &&
	git commit -a -m "Three changes submodule"
'

test_expect_success 'submodule rebase -i' '
	FAKE_LINES="1 squash 2 3" git rebase -i A
'

test_done