Documentation/git-config.txt - git - Git at Google

 git-config(1)
 =============

 NAME
 ----
 git-config - Get and set repository or global options


 SYNOPSIS
 --------
 [verse]
 'git config' [<file-option>] [--type=<type>] [--fixed-value] [--show-origin] [--show-scope] [-z|--null] name [value [value-pattern]]
 'git config' [<file-option>] [--type=<type>] --add name value
 'git config' [<file-option>] [--type=<type>] [--fixed-value] --replace-all name value [value-pattern]
 'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z|--null] [--fixed-value] --get name [value-pattern]
 'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z|--null] [--fixed-value] --get-all name [value-pattern]
 'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z|--null] [--fixed-value] [--name-only] --get-regexp name_regex [value-pattern]
 'git config' [<file-option>] [--type=<type>] [-z|--null] --get-urlmatch name URL
 'git config' [<file-option>] [--fixed-value] --unset name [value-pattern]
 'git config' [<file-option>] [--fixed-value] --unset-all name [value-pattern]
 'git config' [<file-option>] --rename-section old_name new_name
 'git config' [<file-option>] --remove-section name
 'git config' [<file-option>] [--show-origin] [--show-scope] [-z|--null] [--name-only] -l | --list
 'git config' [<file-option>] --get-color name [default]
 'git config' [<file-option>] --get-colorbool name [stdout-is-tty]
 'git config' [<file-option>] -e | --edit

 DESCRIPTION
 -----------
 You can query/set/replace/unset options with this command. The name is
 actually the section and the key separated by a dot, and the value will be
 escaped.

 Multiple lines can be added to an option by using the `--add` option.
 If you want to update or unset an option which can occur on multiple
 lines, a `value-pattern` (which is an extended regular expression,
 unless the `--fixed-value` option is given) needs to be given.  Only the
 existing values that match the pattern are updated or unset.  If
 you want to handle the lines that do *not* match the pattern, just
 prepend a single exclamation mark in front (see also <<EXAMPLES>>),
 but note that this only works when the `--fixed-value` option is not
 in use.

 The `--type=<type>` option instructs 'git config' to ensure that incoming and
 outgoing values are canonicalize-able under the given <type>.  If no
 `--type=<type>` is given, no canonicalization will be performed. Callers may
 unset an existing `--type` specifier with `--no-type`.

 When reading, the values are read from the system, global and
 repository local configuration files by default, and options
 `--system`, `--global`, `--local`, `--worktree` and
 `--file <filename>` can be used to tell the command to read from only
 that location (see <<FILES>>).

 When writing, the new value is written to the repository local
 configuration file by default, and options `--system`, `--global`,
 `--worktree`, `--file <filename>` can be used to tell the command to
 write to that location (you can say `--local` but that is the
 default).

 This command will fail with non-zero status upon error.  Some exit
 codes are:

 - The section or key is invalid (ret=1),
 - no section or name was provided (ret=2),
 - the config file is invalid (ret=3),
 - the config file cannot be written (ret=4),
 - you try to unset an option which does not exist (ret=5),
 - you try to unset/set an option for which multiple lines match (ret=5), or
 - you try to use an invalid regexp (ret=6).

 On success, the command returns the exit code 0.

 OPTIONS
 -------

 --replace-all::
 	Default behavior is to replace at most one line. This replaces
 	all lines matching the key (and optionally the `value-pattern`).

 --add::
 	Adds a new line to the option without altering any existing
 	values.  This is the same as providing '^$' as the `value-pattern`
 	in `--replace-all`.

 --get::
 	Get the value for a given key (optionally filtered by a regex
 	matching the value). Returns error code 1 if the key was not
 	found and the last value if multiple key values were found.

 --get-all::
 	Like get, but returns all values for a multi-valued key.

 --get-regexp::
 	Like --get-all, but interprets the name as a regular expression and
 	writes out the key names.  Regular expression matching is currently
 	case-sensitive and done against a canonicalized version of the key
 	in which section and variable names are lowercased, but subsection
 	names are not.

 --get-urlmatch name URL::
 	When given a two-part name section.key, the value for
 	section.<url>.key whose <url> part matches the best to the
 	given URL is returned (if no such key exists, the value for
 	section.key is used as a fallback).  When given just the
 	section as name, do so for all the keys in the section and
 	list them.  Returns error code 1 if no value is found.

 --global::
 	For writing options: write to global `~/.gitconfig` file
 	rather than the repository `.git/config`, write to
 	`$XDG_CONFIG_HOME/git/config` file if this file exists and the
 	`~/.gitconfig` file doesn't.
 +
 For reading options: read only from global `~/.gitconfig` and from
 `$XDG_CONFIG_HOME/git/config` rather than from all available files.
 +
 See also <<FILES>>.

 --system::
 	For writing options: write to system-wide
 	`$(prefix)/etc/gitconfig` rather than the repository
 	`.git/config`.
 +
 For reading options: read only from system-wide `$(prefix)/etc/gitconfig`
 rather than from all available files.
 +
 See also <<FILES>>.

 --local::
 	For writing options: write to the repository `.git/config` file.
 	This is the default behavior.
 +
 For reading options: read only from the repository `.git/config` rather than
 from all available files.
 +
 See also <<FILES>>.

 --worktree::
 	Similar to `--local` except that `.git/config.worktree` is
 	read from or written to if `extensions.worktreeConfig` is
 	present. If not it's the same as `--local`.

 -f config-file::
 --file config-file::
 	Use the given config file instead of the one specified by GIT_CONFIG.

 --blob blob::
 	Similar to `--file` but use the given blob instead of a file. E.g.
 	you can use 'master:.gitmodules' to read values from the file
 	'.gitmodules' in the master branch. See "SPECIFYING REVISIONS"
 	section in linkgit:gitrevisions[7] for a more complete list of
 	ways to spell blob names.

 --remove-section::
 	Remove the given section from the configuration file.

 --rename-section::
 	Rename the given section to a new name.

 --unset::
 	Remove the line matching the key from config file.

 --unset-all::
 	Remove all lines matching the key from config file.

 -l::
 --list::
 	List all variables set in config file, along with their values.

 --fixed-value::
 	When used with the `value-pattern` argument, treat `value-pattern` as
 	an exact string instead of a regular expression. This will restrict
 	the name/value pairs that are matched to only those where the value
 	is exactly equal to the `value-pattern`.

 --type <type>::
   'git config' will ensure that any input or output is valid under the given
   type constraint(s), and will canonicalize outgoing values in `<type>`'s
   canonical form.
 +
 Valid `<type>`'s include:
 +
 - 'bool': canonicalize values as either "true" or "false".
 - 'int': canonicalize values as simple decimal numbers. An optional suffix of
   'k', 'm', or 'g' will cause the value to be multiplied by 1024, 1048576, or
   1073741824 upon input.
 - 'bool-or-int': canonicalize according to either 'bool' or 'int', as described
   above.
 - 'path': canonicalize by adding a leading `~` to the value of `$HOME` and
   `~user` to the home directory for the specified user. This specifier has no
   effect when setting the value (but you can use `git config section.variable
   ~/` from the command line to let your shell do the expansion.)
 - 'expiry-date': canonicalize by converting from a fixed or relative date-string
   to a timestamp. This specifier has no effect when setting the value.
 - 'color': When getting a value, canonicalize by converting to an ANSI color
   escape sequence. When setting a value, a sanity-check is performed to ensure
   that the given value is canonicalize-able as an ANSI color, but it is written
   as-is.
 +

 --bool::
 --int::
 --bool-or-int::
 --path::
 --expiry-date::
   Historical options for selecting a type specifier. Prefer instead `--type`
   (see above).

 --no-type::
   Un-sets the previously set type specifier (if one was previously set). This
   option requests that 'git config' not canonicalize the retrieved variable.
   `--no-type` has no effect without `--type=<type>` or `--<type>`.

 -z::
 --null::
 	For all options that output values and/or keys, always
 	end values with the null character (instead of a
 	newline). Use newline instead as a delimiter between
 	key and value. This allows for secure parsing of the
 	output without getting confused e.g. by values that
 	contain line breaks.

 --name-only::
 	Output only the names of config variables for `--list` or
 	`--get-regexp`.

 --show-origin::
 	Augment the output of all queried config options with the
 	origin type (file, standard input, blob, command line) and
 	the actual origin (config file path, ref, or blob id if
 	applicable).

 --show-scope::
 	Similar to `--show-origin` in that it augments the output of
 	all queried config options with the scope of that value
 	(local, global, system, command).

 --get-colorbool name [stdout-is-tty]::

 	Find the color setting for `name` (e.g. `color.diff`) and output
 	"true" or "false".  `stdout-is-tty` should be either "true" or
 	"false", and is taken into account when configuration says
 	"auto".  If `stdout-is-tty` is missing, then checks the standard
 	output of the command itself, and exits with status 0 if color
 	is to be used, or exits with status 1 otherwise.
 	When the color setting for `name` is undefined, the command uses
 	`color.ui` as fallback.

 --get-color name [default]::

 	Find the color configured for `name` (e.g. `color.diff.new`) and
 	output it as the ANSI color escape sequence to the standard
 	output.  The optional `default` parameter is used instead, if
 	there is no color configured for `name`.
 +
 `--type=color [--default=<default>]` is preferred over `--get-color`
 (but note that `--get-color` will omit the trailing newline printed by
 `--type=color`).

 -e::
 --edit::
 	Opens an editor to modify the specified config file; either
 	`--system`, `--global`, or repository (default).

 --[no-]includes::
 	Respect `include.*` directives in config files when looking up
 	values. Defaults to `off` when a specific file is given (e.g.,
 	using `--file`, `--global`, etc) and `on` when searching all
 	config files.

 --default <value>::
   When using `--get`, and the requested variable is not found, behave as if
   <value> were the value assigned to the that variable.

 CONFIGURATION
 -------------
 `pager.config` is only respected when listing configuration, i.e., when
 using `--list` or any of the `--get-*` which may return multiple results.
 The default is to use a pager.

 [[FILES]]
 FILES
 -----

 If not set explicitly with `--file`, there are four files where
 'git config' will search for configuration options:

 $(prefix)/etc/gitconfig::
 	System-wide configuration file.

 $XDG_CONFIG_HOME/git/config::
 	Second user-specific configuration file. If $XDG_CONFIG_HOME is not set
 	or empty, `$HOME/.config/git/config` will be used. Any single-valued
 	variable set in this file will be overwritten by whatever is in
 	`~/.gitconfig`.  It is a good idea not to create this file if
 	you sometimes use older versions of Git, as support for this
 	file was added fairly recently.

 ~/.gitconfig::
 	User-specific configuration file. Also called "global"
 	configuration file.

 $GIT_DIR/config::
 	Repository specific configuration file.

 $GIT_DIR/config.worktree::
 	This is optional and is only searched when
 	`extensions.worktreeConfig` is present in $GIT_DIR/config.

 If no further options are given, all reading options will read all of these
 files that are available. If the global or the system-wide configuration
 file are not available they will be ignored. If the repository configuration
 file is not available or readable, 'git config' will exit with a non-zero
 error code. However, in neither case will an error message be issued.

 The files are read in the order given above, with last value found taking
 precedence over values read earlier.  When multiple values are taken then all
 values of a key from all files will be used.

 You may override individual configuration parameters when running any git
 command by using the `-c` option. See linkgit:git[1] for details.

 All writing options will per default write to the repository specific
 configuration file. Note that this also affects options like `--replace-all`
 and `--unset`. *'git config' will only ever change one file at a time*.

 You can override these rules either by command-line options or by environment
 variables. The `--global`, `--system` and `--worktree` options will limit
 the file used to the global, system-wide or per-worktree file respectively.
 The `GIT_CONFIG` environment variable has a similar effect, but you
 can specify any filename you want.


 ENVIRONMENT
 -----------

 GIT_CONFIG::
 	Take the configuration from the given file instead of .git/config.
 	Using the "--global" option forces this to ~/.gitconfig. Using the
 	"--system" option forces this to $(prefix)/etc/gitconfig.

 GIT_CONFIG_GLOBAL::
 GIT_CONFIG_SYSTEM::
 	Take the configuration from the given files instead from global or
 	system-level configuration. See linkgit:git[1] for details.

 GIT_CONFIG_NOSYSTEM::
 	Whether to skip reading settings from the system-wide
 	$(prefix)/etc/gitconfig file. See linkgit:git[1] for details.

 See also <<FILES>>.

 GIT_CONFIG_COUNT::
 GIT_CONFIG_KEY_<n>::
 GIT_CONFIG_VALUE_<n>::
 	If GIT_CONFIG_COUNT is set to a positive number, all environment pairs
 	GIT_CONFIG_KEY_<n> and GIT_CONFIG_VALUE_<n> up to that number will be
 	added to the process's runtime configuration. The config pairs are
 	zero-indexed. Any missing key or value is treated as an error. An empty
 	GIT_CONFIG_COUNT is treated the same as GIT_CONFIG_COUNT=0, namely no
 	pairs are processed. These environment variables will override values
 	in configuration files, but will be overridden by any explicit options
 	passed via `git -c`.
 +
 This is useful for cases where you want to spawn multiple git commands
 with a common configuration but cannot depend on a configuration file,
 for example when writing scripts.


 [[EXAMPLES]]
 EXAMPLES
 --------

 Given a .git/config like this:

 ------------
 #
 # This is the config file, and
 # a '#' or ';' character indicates
 # a comment
 #

 ; core variables
 [core]
 	; Don't trust file modes
 	filemode = false

 ; Our diff algorithm
 [diff]
 	external = /usr/local/bin/diff-wrapper
 	renames = true

 ; Proxy settings
 [core]
 	gitproxy=proxy-command for kernel.org
 	gitproxy=default-proxy ; for all the rest

 ; HTTP
 [http]
 	sslVerify
 [http "https://weak.example.com"]
 	sslVerify = false
 	cookieFile = /tmp/cookie.txt
 ------------

 you can set the filemode to true with

 ------------
 % git config core.filemode true
 ------------

 The hypothetical proxy command entries actually have a postfix to discern
 what URL they apply to. Here is how to change the entry for kernel.org
 to "ssh".

 ------------
 % git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$'
 ------------

 This makes sure that only the key/value pair for kernel.org is replaced.

 To delete the entry for renames, do

 ------------
 % git config --unset diff.renames
 ------------

 If you want to delete an entry for a multivar (like core.gitproxy above),
 you have to provide a regex matching the value of exactly one line.

 To query the value for a given key, do

 ------------
 % git config --get core.filemode
 ------------

 or

 ------------
 % git config core.filemode
 ------------

 or, to query a multivar:

 ------------
 % git config --get core.gitproxy "for kernel.org$"
 ------------

 If you want to know all the values for a multivar, do:

 ------------
 % git config --get-all core.gitproxy
 ------------

 If you like to live dangerously, you can replace *all* core.gitproxy by a
 new one with

 ------------
 % git config --replace-all core.gitproxy ssh
 ------------

 However, if you really only want to replace the line for the default proxy,
 i.e. the one without a "for ..." postfix, do something like this:

 ------------
 % git config core.gitproxy ssh '! for '
 ------------

 To actually match only values with an exclamation mark, you have to

 ------------
 % git config section.key value '[!]'
 ------------

 To add a new proxy, without altering any of the existing ones, use

 ------------
 % git config --add core.gitproxy '"proxy-command" for example.com'
 ------------

 An example to use customized color from the configuration in your
 script:

 ------------
 #!/bin/sh
 WS=$(git config --get-color color.diff.whitespace "blue reverse")
 RESET=$(git config --get-color "" "reset")
 echo "${WS}your whitespace color or blue reverse${RESET}"
 ------------

 For URLs in `https://weak.example.com`, `http.sslVerify` is set to
 false, while it is set to `true` for all others:

 ------------
 % git config --type=bool --get-urlmatch http.sslverify https://good.example.com
 true
 % git config --type=bool --get-urlmatch http.sslverify https://weak.example.com
 false
 % git config --get-urlmatch http https://weak.example.com
 http.cookieFile /tmp/cookie.txt
 http.sslverify false
 ------------

 include::config.txt[]

 BUGS
 ----
 When using the deprecated `[section.subsection]` syntax, changing a value
 will result in adding a multi-line key instead of a change, if the subsection
 is given with at least one uppercase character. For example when the config
 looks like

 --------
   [section.subsection]
     key = value1
 --------

 and running `git config section.Subsection.key value2` will result in

 --------
   [section.subsection]
     key = value1
     key = value2
 --------


 GIT
 ---
 Part of the linkgit:git[1] suite
	git-config(1)
	=============

	NAME
	----
	git-config - Get and set repository or global options


	SYNOPSIS
	--------
	[verse]
	'git config' [<file-option>] [--type=<type>] [--fixed-value] [--show-origin] [--show-scope] [-z\|--null] name [value [value-pattern]]
	'git config' [<file-option>] [--type=<type>] --add name value
	'git config' [<file-option>] [--type=<type>] [--fixed-value] --replace-all name value [value-pattern]
	'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z\|--null] [--fixed-value] --get name [value-pattern]
	'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z\|--null] [--fixed-value] --get-all name [value-pattern]
	'git config' [<file-option>] [--type=<type>] [--show-origin] [--show-scope] [-z\|--null] [--fixed-value] [--name-only] --get-regexp name_regex [value-pattern]
	'git config' [<file-option>] [--type=<type>] [-z\|--null] --get-urlmatch name URL
	'git config' [<file-option>] [--fixed-value] --unset name [value-pattern]
	'git config' [<file-option>] [--fixed-value] --unset-all name [value-pattern]
	'git config' [<file-option>] --rename-section old_name new_name
	'git config' [<file-option>] --remove-section name
	'git config' [<file-option>] [--show-origin] [--show-scope] [-z\|--null] [--name-only] -l \| --list
	'git config' [<file-option>] --get-color name [default]
	'git config' [<file-option>] --get-colorbool name [stdout-is-tty]
	'git config' [<file-option>] -e \| --edit

	DESCRIPTION
	-----------
	You can query/set/replace/unset options with this command. The name is
	actually the section and the key separated by a dot, and the value will be
	escaped.

	Multiple lines can be added to an option by using the `--add` option.
	If you want to update or unset an option which can occur on multiple
	lines, a `value-pattern` (which is an extended regular expression,
	unless the `--fixed-value` option is given) needs to be given. Only the
	existing values that match the pattern are updated or unset. If
	you want to handle the lines that do not match the pattern, just
	prepend a single exclamation mark in front (see also <<EXAMPLES>>),
	but note that this only works when the `--fixed-value` option is not
	in use.

	The `--type=<type>` option instructs 'git config' to ensure that incoming and
	outgoing values are canonicalize-able under the given <type>. If no
	`--type=<type>` is given, no canonicalization will be performed. Callers may
	unset an existing `--type` specifier with `--no-type`.

	When reading, the values are read from the system, global and
	repository local configuration files by default, and options
	`--system`, `--global`, `--local`, `--worktree` and
	`--file <filename>` can be used to tell the command to read from only
	that location (see <<FILES>>).

	When writing, the new value is written to the repository local
	configuration file by default, and options `--system`, `--global`,
	`--worktree`, `--file <filename>` can be used to tell the command to
	write to that location (you can say `--local` but that is the
	default).

	This command will fail with non-zero status upon error. Some exit
	codes are:

	- The section or key is invalid (ret=1),
	- no section or name was provided (ret=2),
	- the config file is invalid (ret=3),
	- the config file cannot be written (ret=4),
	- you try to unset an option which does not exist (ret=5),
	- you try to unset/set an option for which multiple lines match (ret=5), or
	- you try to use an invalid regexp (ret=6).

	On success, the command returns the exit code 0.

	OPTIONS
	-------

	--replace-all::
	Default behavior is to replace at most one line. This replaces
	all lines matching the key (and optionally the `value-pattern`).

	--add::
	Adds a new line to the option without altering any existing
	values. This is the same as providing '^$' as the `value-pattern`
	in `--replace-all`.

	--get::
	Get the value for a given key (optionally filtered by a regex
	matching the value). Returns error code 1 if the key was not
	found and the last value if multiple key values were found.

	--get-all::
	Like get, but returns all values for a multi-valued key.

	--get-regexp::
	Like --get-all, but interprets the name as a regular expression and
	writes out the key names. Regular expression matching is currently
	case-sensitive and done against a canonicalized version of the key
	in which section and variable names are lowercased, but subsection
	names are not.

	--get-urlmatch name URL::
	When given a two-part name section.key, the value for
	section.<url>.key whose <url> part matches the best to the
	given URL is returned (if no such key exists, the value for
	section.key is used as a fallback). When given just the
	section as name, do so for all the keys in the section and
	list them. Returns error code 1 if no value is found.

	--global::
	For writing options: write to global `~/.gitconfig` file
	rather than the repository `.git/config`, write to
	`$XDG_CONFIG_HOME/git/config` file if this file exists and the
	`~/.gitconfig` file doesn't.
	+
	For reading options: read only from global `~/.gitconfig` and from
	`$XDG_CONFIG_HOME/git/config` rather than from all available files.
	+
	See also <<FILES>>.

	--system::
	For writing options: write to system-wide
	`$(prefix)/etc/gitconfig` rather than the repository
	`.git/config`.
	+
	For reading options: read only from system-wide `$(prefix)/etc/gitconfig`
	rather than from all available files.
	+
	See also <<FILES>>.

	--local::
	For writing options: write to the repository `.git/config` file.
	This is the default behavior.
	+
	For reading options: read only from the repository `.git/config` rather than
	from all available files.
	+
	See also <<FILES>>.

	--worktree::
	Similar to `--local` except that `.git/config.worktree` is
	read from or written to if `extensions.worktreeConfig` is
	present. If not it's the same as `--local`.

	-f config-file::
	--file config-file::
	Use the given config file instead of the one specified by GIT_CONFIG.

	--blob blob::
	Similar to `--file` but use the given blob instead of a file. E.g.
	you can use 'master:.gitmodules' to read values from the file
	'.gitmodules' in the master branch. See "SPECIFYING REVISIONS"
	section in linkgit:gitrevisions[7] for a more complete list of
	ways to spell blob names.

	--remove-section::
	Remove the given section from the configuration file.

	--rename-section::
	Rename the given section to a new name.

	--unset::
	Remove the line matching the key from config file.

	--unset-all::
	Remove all lines matching the key from config file.

	-l::
	--list::
	List all variables set in config file, along with their values.

	--fixed-value::
	When used with the `value-pattern` argument, treat `value-pattern` as
	an exact string instead of a regular expression. This will restrict
	the name/value pairs that are matched to only those where the value
	is exactly equal to the `value-pattern`.

	--type <type>::
	'git config' will ensure that any input or output is valid under the given
	type constraint(s), and will canonicalize outgoing values in `<type>`'s
	canonical form.
	+
	Valid `<type>`'s include:
	+
	- 'bool': canonicalize values as either "true" or "false".
	- 'int': canonicalize values as simple decimal numbers. An optional suffix of
	'k', 'm', or 'g' will cause the value to be multiplied by 1024, 1048576, or
	1073741824 upon input.
	- 'bool-or-int': canonicalize according to either 'bool' or 'int', as described
	above.
	- 'path': canonicalize by adding a leading `~` to the value of `$HOME` and
	`~user` to the home directory for the specified user. This specifier has no
	effect when setting the value (but you can use `git config section.variable
	~/` from the command line to let your shell do the expansion.)
	- 'expiry-date': canonicalize by converting from a fixed or relative date-string
	to a timestamp. This specifier has no effect when setting the value.
	- 'color': When getting a value, canonicalize by converting to an ANSI color
	escape sequence. When setting a value, a sanity-check is performed to ensure
	that the given value is canonicalize-able as an ANSI color, but it is written
	as-is.
	+

	--bool::
	--int::
	--bool-or-int::
	--path::
	--expiry-date::
	Historical options for selecting a type specifier. Prefer instead `--type`
	(see above).

	--no-type::
	Un-sets the previously set type specifier (if one was previously set). This
	option requests that 'git config' not canonicalize the retrieved variable.
	`--no-type` has no effect without `--type=<type>` or `--<type>`.

	-z::
	--null::
	For all options that output values and/or keys, always
	end values with the null character (instead of a
	newline). Use newline instead as a delimiter between
	key and value. This allows for secure parsing of the
	output without getting confused e.g. by values that
	contain line breaks.

	--name-only::
	Output only the names of config variables for `--list` or
	`--get-regexp`.

	--show-origin::
	Augment the output of all queried config options with the
	origin type (file, standard input, blob, command line) and
	the actual origin (config file path, ref, or blob id if
	applicable).

	--show-scope::
	Similar to `--show-origin` in that it augments the output of
	all queried config options with the scope of that value
	(local, global, system, command).

	--get-colorbool name [stdout-is-tty]::

	Find the color setting for `name` (e.g. `color.diff`) and output
	"true" or "false". `stdout-is-tty` should be either "true" or
	"false", and is taken into account when configuration says
	"auto". If `stdout-is-tty` is missing, then checks the standard
	output of the command itself, and exits with status 0 if color
	is to be used, or exits with status 1 otherwise.
	When the color setting for `name` is undefined, the command uses
	`color.ui` as fallback.

	--get-color name [default]::

	Find the color configured for `name` (e.g. `color.diff.new`) and
	output it as the ANSI color escape sequence to the standard
	output. The optional `default` parameter is used instead, if
	there is no color configured for `name`.
	+
	`--type=color [--default=<default>]` is preferred over `--get-color`
	(but note that `--get-color` will omit the trailing newline printed by
	`--type=color`).

	-e::
	--edit::
	Opens an editor to modify the specified config file; either
	`--system`, `--global`, or repository (default).

	--[no-]includes::
	Respect `include.*` directives in config files when looking up
	values. Defaults to `off` when a specific file is given (e.g.,
	using `--file`, `--global`, etc) and `on` when searching all
	config files.

	--default <value>::
	When using `--get`, and the requested variable is not found, behave as if
	<value> were the value assigned to the that variable.

	CONFIGURATION
	-------------
	`pager.config` is only respected when listing configuration, i.e., when
	using `--list` or any of the `--get-*` which may return multiple results.
	The default is to use a pager.

	[[FILES]]
	FILES
	-----

	If not set explicitly with `--file`, there are four files where
	'git config' will search for configuration options:

	$(prefix)/etc/gitconfig::
	System-wide configuration file.

	$XDG_CONFIG_HOME/git/config::
	Second user-specific configuration file. If $XDG_CONFIG_HOME is not set
	or empty, `$HOME/.config/git/config` will be used. Any single-valued
	variable set in this file will be overwritten by whatever is in
	`~/.gitconfig`. It is a good idea not to create this file if
	you sometimes use older versions of Git, as support for this
	file was added fairly recently.

	~/.gitconfig::
	User-specific configuration file. Also called "global"
	configuration file.

	$GIT_DIR/config::
	Repository specific configuration file.

	$GIT_DIR/config.worktree::
	This is optional and is only searched when
	`extensions.worktreeConfig` is present in $GIT_DIR/config.

	If no further options are given, all reading options will read all of these
	files that are available. If the global or the system-wide configuration
	file are not available they will be ignored. If the repository configuration
	file is not available or readable, 'git config' will exit with a non-zero
	error code. However, in neither case will an error message be issued.

	The files are read in the order given above, with last value found taking
	precedence over values read earlier. When multiple values are taken then all
	values of a key from all files will be used.

	You may override individual configuration parameters when running any git
	command by using the `-c` option. See linkgit:git[1] for details.

	All writing options will per default write to the repository specific
	configuration file. Note that this also affects options like `--replace-all`
	and `--unset`. 'git config' will only ever change one file at a time.

	You can override these rules either by command-line options or by environment
	variables. The `--global`, `--system` and `--worktree` options will limit
	the file used to the global, system-wide or per-worktree file respectively.
	The `GIT_CONFIG` environment variable has a similar effect, but you
	can specify any filename you want.


	ENVIRONMENT
	-----------

	GIT_CONFIG::
	Take the configuration from the given file instead of .git/config.
	Using the "--global" option forces this to ~/.gitconfig. Using the
	"--system" option forces this to $(prefix)/etc/gitconfig.

	GIT_CONFIG_GLOBAL::
	GIT_CONFIG_SYSTEM::
	Take the configuration from the given files instead from global or
	system-level configuration. See linkgit:git[1] for details.

	GIT_CONFIG_NOSYSTEM::
	Whether to skip reading settings from the system-wide
	$(prefix)/etc/gitconfig file. See linkgit:git[1] for details.

	See also <<FILES>>.

	GIT_CONFIG_COUNT::
	GIT_CONFIG_KEY_<n>::
	GIT_CONFIG_VALUE_<n>::
	If GIT_CONFIG_COUNT is set to a positive number, all environment pairs
	GIT_CONFIG_KEY_<n> and GIT_CONFIG_VALUE_<n> up to that number will be
	added to the process's runtime configuration. The config pairs are
	zero-indexed. Any missing key or value is treated as an error. An empty
	GIT_CONFIG_COUNT is treated the same as GIT_CONFIG_COUNT=0, namely no
	pairs are processed. These environment variables will override values
	in configuration files, but will be overridden by any explicit options
	passed via `git -c`.
	+
	This is useful for cases where you want to spawn multiple git commands
	with a common configuration but cannot depend on a configuration file,
	for example when writing scripts.


	[[EXAMPLES]]
	EXAMPLES
	--------

	Given a .git/config like this:

	------------
	#
	# This is the config file, and
	# a '#' or ';' character indicates
	# a comment
	#

	; core variables
	[core]
	; Don't trust file modes
	filemode = false

	; Our diff algorithm
	[diff]
	external = /usr/local/bin/diff-wrapper
	renames = true

	; Proxy settings
	[core]
	gitproxy=proxy-command for kernel.org
	gitproxy=default-proxy ; for all the rest

	; HTTP
	[http]
	sslVerify
	[http "https://weak.example.com"]
	sslVerify = false
	cookieFile = /tmp/cookie.txt
	------------

	you can set the filemode to true with

	------------
	% git config core.filemode true
	------------

	The hypothetical proxy command entries actually have a postfix to discern
	what URL they apply to. Here is how to change the entry for kernel.org
	to "ssh".

	------------
	% git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$'
	------------

	This makes sure that only the key/value pair for kernel.org is replaced.

	To delete the entry for renames, do

	------------
	% git config --unset diff.renames
	------------

	If you want to delete an entry for a multivar (like core.gitproxy above),
	you have to provide a regex matching the value of exactly one line.

	To query the value for a given key, do

	------------
	% git config --get core.filemode
	------------

	or

	------------
	% git config core.filemode
	------------

	or, to query a multivar:

	------------
	% git config --get core.gitproxy "for kernel.org$"
	------------

	If you want to know all the values for a multivar, do:

	------------
	% git config --get-all core.gitproxy
	------------

	If you like to live dangerously, you can replace all core.gitproxy by a
	new one with

	------------
	% git config --replace-all core.gitproxy ssh
	------------

	However, if you really only want to replace the line for the default proxy,
	i.e. the one without a "for ..." postfix, do something like this:

	------------
	% git config core.gitproxy ssh '! for '
	------------

	To actually match only values with an exclamation mark, you have to

	------------
	% git config section.key value '[!]'
	------------

	To add a new proxy, without altering any of the existing ones, use

	------------
	% git config --add core.gitproxy '"proxy-command" for example.com'
	------------

	An example to use customized color from the configuration in your
	script:

	------------
	#!/bin/sh
	WS=$(git config --get-color color.diff.whitespace "blue reverse")
	RESET=$(git config --get-color "" "reset")
	echo "${WS}your whitespace color or blue reverse${RESET}"
	------------

	For URLs in `https://weak.example.com`, `http.sslVerify` is set to
	false, while it is set to `true` for all others:

	------------
	% git config --type=bool --get-urlmatch http.sslverify https://good.example.com
	true
	% git config --type=bool --get-urlmatch http.sslverify https://weak.example.com
	false
	% git config --get-urlmatch http https://weak.example.com
	http.cookieFile /tmp/cookie.txt
	http.sslverify false
	------------

	include::config.txt[]

	BUGS
	----
	When using the deprecated `[section.subsection]` syntax, changing a value
	will result in adding a multi-line key instead of a change, if the subsection
	is given with at least one uppercase character. For example when the config
	looks like

	--------
	[section.subsection]
	key = value1
	--------

	and running `git config section.Subsection.key value2` will result in

	--------
	[section.subsection]
	key = value1
	key = value2
	--------


	GIT
	---
	Part of the linkgit:git[1] suite