|  | /* | 
|  | * GIT - The information manager from hell | 
|  | * | 
|  | * Copyright (C) Linus Torvalds, 2005 | 
|  | */ | 
|  |  | 
|  | #include "cache.h" | 
|  |  | 
|  | /* | 
|  | * This is like mktime, but without normalization of tm_wday and tm_yday. | 
|  | */ | 
|  | static time_t tm_to_time_t(const struct tm *tm) | 
|  | { | 
|  | static const int mdays[] = { | 
|  | 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 | 
|  | }; | 
|  | int year = tm->tm_year - 70; | 
|  | int month = tm->tm_mon; | 
|  | int day = tm->tm_mday; | 
|  |  | 
|  | if (year < 0 || year > 129) /* algo only works for 1970-2099 */ | 
|  | return -1; | 
|  | if (month < 0 || month > 11) /* array bounds */ | 
|  | return -1; | 
|  | if (month < 2 || (year + 2) % 4) | 
|  | day--; | 
|  | if (tm->tm_hour < 0 || tm->tm_min < 0 || tm->tm_sec < 0) | 
|  | return -1; | 
|  | return (year * 365 + (year + 1) / 4 + mdays[month] + day) * 24*60*60UL + | 
|  | tm->tm_hour * 60*60 + tm->tm_min * 60 + tm->tm_sec; | 
|  | } | 
|  |  | 
|  | static const char *month_names[] = { | 
|  | "January", "February", "March", "April", "May", "June", | 
|  | "July", "August", "September", "October", "November", "December" | 
|  | }; | 
|  |  | 
|  | static const char *weekday_names[] = { | 
|  | "Sundays", "Mondays", "Tuesdays", "Wednesdays", "Thursdays", "Fridays", "Saturdays" | 
|  | }; | 
|  |  | 
|  | static time_t gm_time_t(unsigned long time, int tz) | 
|  | { | 
|  | int minutes; | 
|  |  | 
|  | minutes = tz < 0 ? -tz : tz; | 
|  | minutes = (minutes / 100)*60 + (minutes % 100); | 
|  | minutes = tz < 0 ? -minutes : minutes; | 
|  | return time + minutes * 60; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The "tz" thing is passed in as this strange "decimal parse of tz" | 
|  | * thing, which means that tz -0100 is passed in as the integer -100, | 
|  | * even though it means "sixty minutes off" | 
|  | */ | 
|  | static struct tm *time_to_tm(unsigned long time, int tz) | 
|  | { | 
|  | time_t t = gm_time_t(time, tz); | 
|  | return gmtime(&t); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * What value of "tz" was in effect back then at "time" in the | 
|  | * local timezone? | 
|  | */ | 
|  | static int local_tzoffset(unsigned long time) | 
|  | { | 
|  | time_t t, t_local; | 
|  | struct tm tm; | 
|  | int offset, eastwest; | 
|  |  | 
|  | t = time; | 
|  | localtime_r(&t, &tm); | 
|  | t_local = tm_to_time_t(&tm); | 
|  |  | 
|  | if (t_local < t) { | 
|  | eastwest = -1; | 
|  | offset = t - t_local; | 
|  | } else { | 
|  | eastwest = 1; | 
|  | offset = t_local - t; | 
|  | } | 
|  | offset /= 60; /* in minutes */ | 
|  | offset = (offset % 60) + ((offset / 60) * 100); | 
|  | return offset * eastwest; | 
|  | } | 
|  |  | 
|  | const char *show_date_relative(unsigned long time, int tz, | 
|  | const struct timeval *now, | 
|  | char *timebuf, | 
|  | size_t timebuf_size) | 
|  | { | 
|  | unsigned long diff; | 
|  | if (now->tv_sec < time) | 
|  | return "in the future"; | 
|  | diff = now->tv_sec - time; | 
|  | if (diff < 90) { | 
|  | snprintf(timebuf, timebuf_size, "%lu seconds ago", diff); | 
|  | return timebuf; | 
|  | } | 
|  | /* Turn it into minutes */ | 
|  | diff = (diff + 30) / 60; | 
|  | if (diff < 90) { | 
|  | snprintf(timebuf, timebuf_size, "%lu minutes ago", diff); | 
|  | return timebuf; | 
|  | } | 
|  | /* Turn it into hours */ | 
|  | diff = (diff + 30) / 60; | 
|  | if (diff < 36) { | 
|  | snprintf(timebuf, timebuf_size, "%lu hours ago", diff); | 
|  | return timebuf; | 
|  | } | 
|  | /* We deal with number of days from here on */ | 
|  | diff = (diff + 12) / 24; | 
|  | if (diff < 14) { | 
|  | snprintf(timebuf, timebuf_size, "%lu days ago", diff); | 
|  | return timebuf; | 
|  | } | 
|  | /* Say weeks for the past 10 weeks or so */ | 
|  | if (diff < 70) { | 
|  | snprintf(timebuf, timebuf_size, "%lu weeks ago", (diff + 3) / 7); | 
|  | return timebuf; | 
|  | } | 
|  | /* Say months for the past 12 months or so */ | 
|  | if (diff < 365) { | 
|  | snprintf(timebuf, timebuf_size, "%lu months ago", (diff + 15) / 30); | 
|  | return timebuf; | 
|  | } | 
|  | /* Give years and months for 5 years or so */ | 
|  | if (diff < 1825) { | 
|  | unsigned long years = diff / 365; | 
|  | unsigned long months = (diff % 365 + 15) / 30; | 
|  | int n; | 
|  | n = snprintf(timebuf, timebuf_size, "%lu year%s", | 
|  | years, (years > 1 ? "s" : "")); | 
|  | if (months) | 
|  | snprintf(timebuf + n, timebuf_size - n, | 
|  | ", %lu month%s ago", | 
|  | months, (months > 1 ? "s" : "")); | 
|  | else | 
|  | snprintf(timebuf + n, timebuf_size - n, " ago"); | 
|  | return timebuf; | 
|  | } | 
|  | /* Otherwise, just years. Centuries is probably overkill. */ | 
|  | snprintf(timebuf, timebuf_size, "%lu years ago", (diff + 183) / 365); | 
|  | return timebuf; | 
|  | } | 
|  |  | 
|  | const char *show_date(unsigned long time, int tz, enum date_mode mode) | 
|  | { | 
|  | struct tm *tm; | 
|  | static char timebuf[200]; | 
|  |  | 
|  | if (mode == DATE_RAW) { | 
|  | snprintf(timebuf, sizeof(timebuf), "%lu %+05d", time, tz); | 
|  | return timebuf; | 
|  | } | 
|  |  | 
|  | if (mode == DATE_RELATIVE) { | 
|  | struct timeval now; | 
|  | gettimeofday(&now, NULL); | 
|  | return show_date_relative(time, tz, &now, | 
|  | timebuf, sizeof(timebuf)); | 
|  | } | 
|  |  | 
|  | if (mode == DATE_LOCAL) | 
|  | tz = local_tzoffset(time); | 
|  |  | 
|  | tm = time_to_tm(time, tz); | 
|  | if (!tm) | 
|  | return NULL; | 
|  | if (mode == DATE_SHORT) | 
|  | sprintf(timebuf, "%04d-%02d-%02d", tm->tm_year + 1900, | 
|  | tm->tm_mon + 1, tm->tm_mday); | 
|  | else if (mode == DATE_ISO8601) | 
|  | sprintf(timebuf, "%04d-%02d-%02d %02d:%02d:%02d %+05d", | 
|  | tm->tm_year + 1900, | 
|  | tm->tm_mon + 1, | 
|  | tm->tm_mday, | 
|  | tm->tm_hour, tm->tm_min, tm->tm_sec, | 
|  | tz); | 
|  | else if (mode == DATE_RFC2822) | 
|  | sprintf(timebuf, "%.3s, %d %.3s %d %02d:%02d:%02d %+05d", | 
|  | weekday_names[tm->tm_wday], tm->tm_mday, | 
|  | month_names[tm->tm_mon], tm->tm_year + 1900, | 
|  | tm->tm_hour, tm->tm_min, tm->tm_sec, tz); | 
|  | else | 
|  | sprintf(timebuf, "%.3s %.3s %d %02d:%02d:%02d %d%c%+05d", | 
|  | weekday_names[tm->tm_wday], | 
|  | month_names[tm->tm_mon], | 
|  | tm->tm_mday, | 
|  | tm->tm_hour, tm->tm_min, tm->tm_sec, | 
|  | tm->tm_year + 1900, | 
|  | (mode == DATE_LOCAL) ? 0 : ' ', | 
|  | tz); | 
|  | return timebuf; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check these. And note how it doesn't do the summer-time conversion. | 
|  | * | 
|  | * In my world, it's always summer, and things are probably a bit off | 
|  | * in other ways too. | 
|  | */ | 
|  | static const struct { | 
|  | const char *name; | 
|  | int offset; | 
|  | int dst; | 
|  | } timezone_names[] = { | 
|  | { "IDLW", -12, 0, },	/* International Date Line West */ | 
|  | { "NT",   -11, 0, },	/* Nome */ | 
|  | { "CAT",  -10, 0, },	/* Central Alaska */ | 
|  | { "HST",  -10, 0, },	/* Hawaii Standard */ | 
|  | { "HDT",  -10, 1, },	/* Hawaii Daylight */ | 
|  | { "YST",   -9, 0, },	/* Yukon Standard */ | 
|  | { "YDT",   -9, 1, },	/* Yukon Daylight */ | 
|  | { "PST",   -8, 0, },	/* Pacific Standard */ | 
|  | { "PDT",   -8, 1, },	/* Pacific Daylight */ | 
|  | { "MST",   -7, 0, },	/* Mountain Standard */ | 
|  | { "MDT",   -7, 1, },	/* Mountain Daylight */ | 
|  | { "CST",   -6, 0, },	/* Central Standard */ | 
|  | { "CDT",   -6, 1, },	/* Central Daylight */ | 
|  | { "EST",   -5, 0, },	/* Eastern Standard */ | 
|  | { "EDT",   -5, 1, },	/* Eastern Daylight */ | 
|  | { "AST",   -3, 0, },	/* Atlantic Standard */ | 
|  | { "ADT",   -3, 1, },	/* Atlantic Daylight */ | 
|  | { "WAT",   -1, 0, },	/* West Africa */ | 
|  |  | 
|  | { "GMT",    0, 0, },	/* Greenwich Mean */ | 
|  | { "UTC",    0, 0, },	/* Universal (Coordinated) */ | 
|  |  | 
|  | { "WET",    0, 0, },	/* Western European */ | 
|  | { "BST",    0, 1, },	/* British Summer */ | 
|  | { "CET",   +1, 0, },	/* Central European */ | 
|  | { "MET",   +1, 0, },	/* Middle European */ | 
|  | { "MEWT",  +1, 0, },	/* Middle European Winter */ | 
|  | { "MEST",  +1, 1, },	/* Middle European Summer */ | 
|  | { "CEST",  +1, 1, },	/* Central European Summer */ | 
|  | { "MESZ",  +1, 1, },	/* Middle European Summer */ | 
|  | { "FWT",   +1, 0, },	/* French Winter */ | 
|  | { "FST",   +1, 1, },	/* French Summer */ | 
|  | { "EET",   +2, 0, },	/* Eastern Europe, USSR Zone 1 */ | 
|  | { "EEST",  +2, 1, },	/* Eastern European Daylight */ | 
|  | { "WAST",  +7, 0, },	/* West Australian Standard */ | 
|  | { "WADT",  +7, 1, },	/* West Australian Daylight */ | 
|  | { "CCT",   +8, 0, },	/* China Coast, USSR Zone 7 */ | 
|  | { "JST",   +9, 0, },	/* Japan Standard, USSR Zone 8 */ | 
|  | { "EAST", +10, 0, },	/* Eastern Australian Standard */ | 
|  | { "EADT", +10, 1, },	/* Eastern Australian Daylight */ | 
|  | { "GST",  +10, 0, },	/* Guam Standard, USSR Zone 9 */ | 
|  | { "NZT",  +12, 0, },	/* New Zealand */ | 
|  | { "NZST", +12, 0, },	/* New Zealand Standard */ | 
|  | { "NZDT", +12, 1, },	/* New Zealand Daylight */ | 
|  | { "IDLE", +12, 0, },	/* International Date Line East */ | 
|  | }; | 
|  |  | 
|  | static int match_string(const char *date, const char *str) | 
|  | { | 
|  | int i = 0; | 
|  |  | 
|  | for (i = 0; *date; date++, str++, i++) { | 
|  | if (*date == *str) | 
|  | continue; | 
|  | if (toupper(*date) == toupper(*str)) | 
|  | continue; | 
|  | if (!isalnum(*date)) | 
|  | break; | 
|  | return 0; | 
|  | } | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int skip_alpha(const char *date) | 
|  | { | 
|  | int i = 0; | 
|  | do { | 
|  | i++; | 
|  | } while (isalpha(date[i])); | 
|  | return i; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Parse month, weekday, or timezone name | 
|  | */ | 
|  | static int match_alpha(const char *date, struct tm *tm, int *offset) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 12; i++) { | 
|  | int match = match_string(date, month_names[i]); | 
|  | if (match >= 3) { | 
|  | tm->tm_mon = i; | 
|  | return match; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 7; i++) { | 
|  | int match = match_string(date, weekday_names[i]); | 
|  | if (match >= 3) { | 
|  | tm->tm_wday = i; | 
|  | return match; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(timezone_names); i++) { | 
|  | int match = match_string(date, timezone_names[i].name); | 
|  | if (match >= 3) { | 
|  | int off = timezone_names[i].offset; | 
|  |  | 
|  | /* This is bogus, but we like summer */ | 
|  | off += timezone_names[i].dst; | 
|  |  | 
|  | /* Only use the tz name offset if we don't have anything better */ | 
|  | if (*offset == -1) | 
|  | *offset = 60*off; | 
|  |  | 
|  | return match; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (match_string(date, "PM") == 2) { | 
|  | tm->tm_hour = (tm->tm_hour % 12) + 12; | 
|  | return 2; | 
|  | } | 
|  |  | 
|  | if (match_string(date, "AM") == 2) { | 
|  | tm->tm_hour = (tm->tm_hour % 12) + 0; | 
|  | return 2; | 
|  | } | 
|  |  | 
|  | /* BAD CRAP */ | 
|  | return skip_alpha(date); | 
|  | } | 
|  |  | 
|  | static int is_date(int year, int month, int day, struct tm *now_tm, time_t now, struct tm *tm) | 
|  | { | 
|  | if (month > 0 && month < 13 && day > 0 && day < 32) { | 
|  | struct tm check = *tm; | 
|  | struct tm *r = (now_tm ? &check : tm); | 
|  | time_t specified; | 
|  |  | 
|  | r->tm_mon = month - 1; | 
|  | r->tm_mday = day; | 
|  | if (year == -1) { | 
|  | if (!now_tm) | 
|  | return 1; | 
|  | r->tm_year = now_tm->tm_year; | 
|  | } | 
|  | else if (year >= 1970 && year < 2100) | 
|  | r->tm_year = year - 1900; | 
|  | else if (year > 70 && year < 100) | 
|  | r->tm_year = year; | 
|  | else if (year < 38) | 
|  | r->tm_year = year + 100; | 
|  | else | 
|  | return 0; | 
|  | if (!now_tm) | 
|  | return 1; | 
|  |  | 
|  | specified = tm_to_time_t(r); | 
|  |  | 
|  | /* Be it commit time or author time, it does not make | 
|  | * sense to specify timestamp way into the future.  Make | 
|  | * sure it is not later than ten days from now... | 
|  | */ | 
|  | if (now + 10*24*3600 < specified) | 
|  | return 0; | 
|  | tm->tm_mon = r->tm_mon; | 
|  | tm->tm_mday = r->tm_mday; | 
|  | if (year != -1) | 
|  | tm->tm_year = r->tm_year; | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int match_multi_number(unsigned long num, char c, const char *date, char *end, struct tm *tm) | 
|  | { | 
|  | time_t now; | 
|  | struct tm now_tm; | 
|  | struct tm *refuse_future; | 
|  | long num2, num3; | 
|  |  | 
|  | num2 = strtol(end+1, &end, 10); | 
|  | num3 = -1; | 
|  | if (*end == c && isdigit(end[1])) | 
|  | num3 = strtol(end+1, &end, 10); | 
|  |  | 
|  | /* Time? Date? */ | 
|  | switch (c) { | 
|  | case ':': | 
|  | if (num3 < 0) | 
|  | num3 = 0; | 
|  | if (num < 25 && num2 >= 0 && num2 < 60 && num3 >= 0 && num3 <= 60) { | 
|  | tm->tm_hour = num; | 
|  | tm->tm_min = num2; | 
|  | tm->tm_sec = num3; | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | case '-': | 
|  | case '/': | 
|  | case '.': | 
|  | now = time(NULL); | 
|  | refuse_future = NULL; | 
|  | if (gmtime_r(&now, &now_tm)) | 
|  | refuse_future = &now_tm; | 
|  |  | 
|  | if (num > 70) { | 
|  | /* yyyy-mm-dd? */ | 
|  | if (is_date(num, num2, num3, refuse_future, now, tm)) | 
|  | break; | 
|  | /* yyyy-dd-mm? */ | 
|  | if (is_date(num, num3, num2, refuse_future, now, tm)) | 
|  | break; | 
|  | } | 
|  | /* Our eastern European friends say dd.mm.yy[yy] | 
|  | * is the norm there, so giving precedence to | 
|  | * mm/dd/yy[yy] form only when separator is not '.' | 
|  | */ | 
|  | if (c != '.' && | 
|  | is_date(num3, num, num2, refuse_future, now, tm)) | 
|  | break; | 
|  | /* European dd.mm.yy[yy] or funny US dd/mm/yy[yy] */ | 
|  | if (is_date(num3, num2, num, refuse_future, now, tm)) | 
|  | break; | 
|  | /* Funny European mm.dd.yy */ | 
|  | if (c == '.' && | 
|  | is_date(num3, num, num2, refuse_future, now, tm)) | 
|  | break; | 
|  | return 0; | 
|  | } | 
|  | return end - date; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Have we filled in any part of the time/date yet? | 
|  | * We just do a binary 'and' to see if the sign bit | 
|  | * is set in all the values. | 
|  | */ | 
|  | static inline int nodate(struct tm *tm) | 
|  | { | 
|  | return (tm->tm_year & | 
|  | tm->tm_mon & | 
|  | tm->tm_mday & | 
|  | tm->tm_hour & | 
|  | tm->tm_min & | 
|  | tm->tm_sec) < 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We've seen a digit. Time? Year? Date? | 
|  | */ | 
|  | static int match_digit(const char *date, struct tm *tm, int *offset, int *tm_gmt) | 
|  | { | 
|  | int n; | 
|  | char *end; | 
|  | unsigned long num; | 
|  |  | 
|  | num = strtoul(date, &end, 10); | 
|  |  | 
|  | /* | 
|  | * Seconds since 1970? We trigger on that for any numbers with | 
|  | * more than 8 digits. This is because we don't want to rule out | 
|  | * numbers like 20070606 as a YYYYMMDD date. | 
|  | */ | 
|  | if (num >= 100000000 && nodate(tm)) { | 
|  | time_t time = num; | 
|  | if (gmtime_r(&time, tm)) { | 
|  | *tm_gmt = 1; | 
|  | return end - date; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for special formats: num[-.:/]num[same]num | 
|  | */ | 
|  | switch (*end) { | 
|  | case ':': | 
|  | case '.': | 
|  | case '/': | 
|  | case '-': | 
|  | if (isdigit(end[1])) { | 
|  | int match = match_multi_number(num, *end, date, end, tm); | 
|  | if (match) | 
|  | return match; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * None of the special formats? Try to guess what | 
|  | * the number meant. We use the number of digits | 
|  | * to make a more educated guess.. | 
|  | */ | 
|  | n = 0; | 
|  | do { | 
|  | n++; | 
|  | } while (isdigit(date[n])); | 
|  |  | 
|  | /* Four-digit year or a timezone? */ | 
|  | if (n == 4) { | 
|  | if (num <= 1400 && *offset == -1) { | 
|  | unsigned int minutes = num % 100; | 
|  | unsigned int hours = num / 100; | 
|  | *offset = hours*60 + minutes; | 
|  | } else if (num > 1900 && num < 2100) | 
|  | tm->tm_year = num - 1900; | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Ignore lots of numerals. We took care of 4-digit years above. | 
|  | * Days or months must be one or two digits. | 
|  | */ | 
|  | if (n > 2) | 
|  | return n; | 
|  |  | 
|  | /* | 
|  | * NOTE! We will give precedence to day-of-month over month or | 
|  | * year numbers in the 1-12 range. So 05 is always "mday 5", | 
|  | * unless we already have a mday.. | 
|  | * | 
|  | * IOW, 01 Apr 05 parses as "April 1st, 2005". | 
|  | */ | 
|  | if (num > 0 && num < 32 && tm->tm_mday < 0) { | 
|  | tm->tm_mday = num; | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /* Two-digit year? */ | 
|  | if (n == 2 && tm->tm_year < 0) { | 
|  | if (num < 10 && tm->tm_mday >= 0) { | 
|  | tm->tm_year = num + 100; | 
|  | return n; | 
|  | } | 
|  | if (num >= 70) { | 
|  | tm->tm_year = num; | 
|  | return n; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (num > 0 && num < 13 && tm->tm_mon < 0) | 
|  | tm->tm_mon = num-1; | 
|  |  | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static int match_tz(const char *date, int *offp) | 
|  | { | 
|  | char *end; | 
|  | int offset = strtoul(date+1, &end, 10); | 
|  | int min, hour; | 
|  | int n = end - date - 1; | 
|  |  | 
|  | min = offset % 100; | 
|  | hour = offset / 100; | 
|  |  | 
|  | /* | 
|  | * Don't accept any random crap.. At least 3 digits, and | 
|  | * a valid minute. We might want to check that the minutes | 
|  | * are divisible by 30 or something too. | 
|  | */ | 
|  | if (min < 60 && n > 2) { | 
|  | offset = hour*60+min; | 
|  | if (*date == '-') | 
|  | offset = -offset; | 
|  |  | 
|  | *offp = offset; | 
|  | } | 
|  | return end - date; | 
|  | } | 
|  |  | 
|  | static int date_string(unsigned long date, int offset, char *buf, int len) | 
|  | { | 
|  | int sign = '+'; | 
|  |  | 
|  | if (offset < 0) { | 
|  | offset = -offset; | 
|  | sign = '-'; | 
|  | } | 
|  | return snprintf(buf, len, "%lu %c%02d%02d", date, sign, offset / 60, offset % 60); | 
|  | } | 
|  |  | 
|  | /* Gr. strptime is crap for this; it doesn't have a way to require RFC2822 | 
|  | (i.e. English) day/month names, and it doesn't work correctly with %z. */ | 
|  | int parse_date(const char *date, char *result, int maxlen) | 
|  | { | 
|  | struct tm tm; | 
|  | int offset, tm_gmt; | 
|  | time_t then; | 
|  |  | 
|  | memset(&tm, 0, sizeof(tm)); | 
|  | tm.tm_year = -1; | 
|  | tm.tm_mon = -1; | 
|  | tm.tm_mday = -1; | 
|  | tm.tm_isdst = -1; | 
|  | tm.tm_hour = -1; | 
|  | tm.tm_min = -1; | 
|  | tm.tm_sec = -1; | 
|  | offset = -1; | 
|  | tm_gmt = 0; | 
|  |  | 
|  | for (;;) { | 
|  | int match = 0; | 
|  | unsigned char c = *date; | 
|  |  | 
|  | /* Stop at end of string or newline */ | 
|  | if (!c || c == '\n') | 
|  | break; | 
|  |  | 
|  | if (isalpha(c)) | 
|  | match = match_alpha(date, &tm, &offset); | 
|  | else if (isdigit(c)) | 
|  | match = match_digit(date, &tm, &offset, &tm_gmt); | 
|  | else if ((c == '-' || c == '+') && isdigit(date[1])) | 
|  | match = match_tz(date, &offset); | 
|  |  | 
|  | if (!match) { | 
|  | /* BAD CRAP */ | 
|  | match = 1; | 
|  | } | 
|  |  | 
|  | date += match; | 
|  | } | 
|  |  | 
|  | /* mktime uses local timezone */ | 
|  | then = tm_to_time_t(&tm); | 
|  | if (offset == -1) | 
|  | offset = (then - mktime(&tm)) / 60; | 
|  |  | 
|  | if (then == -1) | 
|  | return -1; | 
|  |  | 
|  | if (!tm_gmt) | 
|  | then -= offset * 60; | 
|  | return date_string(then, offset, result, maxlen); | 
|  | } | 
|  |  | 
|  | enum date_mode parse_date_format(const char *format) | 
|  | { | 
|  | if (!strcmp(format, "relative")) | 
|  | return DATE_RELATIVE; | 
|  | else if (!strcmp(format, "iso8601") || | 
|  | !strcmp(format, "iso")) | 
|  | return DATE_ISO8601; | 
|  | else if (!strcmp(format, "rfc2822") || | 
|  | !strcmp(format, "rfc")) | 
|  | return DATE_RFC2822; | 
|  | else if (!strcmp(format, "short")) | 
|  | return DATE_SHORT; | 
|  | else if (!strcmp(format, "local")) | 
|  | return DATE_LOCAL; | 
|  | else if (!strcmp(format, "default")) | 
|  | return DATE_NORMAL; | 
|  | else if (!strcmp(format, "raw")) | 
|  | return DATE_RAW; | 
|  | else | 
|  | die("unknown date format %s", format); | 
|  | } | 
|  |  | 
|  | void datestamp(char *buf, int bufsize) | 
|  | { | 
|  | time_t now; | 
|  | int offset; | 
|  |  | 
|  | time(&now); | 
|  |  | 
|  | offset = tm_to_time_t(localtime(&now)) - now; | 
|  | offset /= 60; | 
|  |  | 
|  | date_string(now, offset, buf, bufsize); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Relative time update (eg "2 days ago").  If we haven't set the time | 
|  | * yet, we need to set it from current time. | 
|  | */ | 
|  | static unsigned long update_tm(struct tm *tm, struct tm *now, unsigned long sec) | 
|  | { | 
|  | time_t n; | 
|  |  | 
|  | if (tm->tm_mday < 0) | 
|  | tm->tm_mday = now->tm_mday; | 
|  | if (tm->tm_mon < 0) | 
|  | tm->tm_mon = now->tm_mon; | 
|  | if (tm->tm_year < 0) { | 
|  | tm->tm_year = now->tm_year; | 
|  | if (tm->tm_mon > now->tm_mon) | 
|  | tm->tm_year--; | 
|  | } | 
|  |  | 
|  | n = mktime(tm) - sec; | 
|  | localtime_r(&n, tm); | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static void date_now(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | update_tm(tm, now, 0); | 
|  | } | 
|  |  | 
|  | static void date_yesterday(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | update_tm(tm, now, 24*60*60); | 
|  | } | 
|  |  | 
|  | static void date_time(struct tm *tm, struct tm *now, int hour) | 
|  | { | 
|  | if (tm->tm_hour < hour) | 
|  | date_yesterday(tm, now, NULL); | 
|  | tm->tm_hour = hour; | 
|  | tm->tm_min = 0; | 
|  | tm->tm_sec = 0; | 
|  | } | 
|  |  | 
|  | static void date_midnight(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | date_time(tm, now, 0); | 
|  | } | 
|  |  | 
|  | static void date_noon(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | date_time(tm, now, 12); | 
|  | } | 
|  |  | 
|  | static void date_tea(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | date_time(tm, now, 17); | 
|  | } | 
|  |  | 
|  | static void date_pm(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | int hour, n = *num; | 
|  | *num = 0; | 
|  |  | 
|  | hour = tm->tm_hour; | 
|  | if (n) { | 
|  | hour = n; | 
|  | tm->tm_min = 0; | 
|  | tm->tm_sec = 0; | 
|  | } | 
|  | tm->tm_hour = (hour % 12) + 12; | 
|  | } | 
|  |  | 
|  | static void date_am(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | int hour, n = *num; | 
|  | *num = 0; | 
|  |  | 
|  | hour = tm->tm_hour; | 
|  | if (n) { | 
|  | hour = n; | 
|  | tm->tm_min = 0; | 
|  | tm->tm_sec = 0; | 
|  | } | 
|  | tm->tm_hour = (hour % 12); | 
|  | } | 
|  |  | 
|  | static void date_never(struct tm *tm, struct tm *now, int *num) | 
|  | { | 
|  | time_t n = 0; | 
|  | localtime_r(&n, tm); | 
|  | } | 
|  |  | 
|  | static const struct special { | 
|  | const char *name; | 
|  | void (*fn)(struct tm *, struct tm *, int *); | 
|  | } special[] = { | 
|  | { "yesterday", date_yesterday }, | 
|  | { "noon", date_noon }, | 
|  | { "midnight", date_midnight }, | 
|  | { "tea", date_tea }, | 
|  | { "PM", date_pm }, | 
|  | { "AM", date_am }, | 
|  | { "never", date_never }, | 
|  | { "now", date_now }, | 
|  | { NULL } | 
|  | }; | 
|  |  | 
|  | static const char *number_name[] = { | 
|  | "zero", "one", "two", "three", "four", | 
|  | "five", "six", "seven", "eight", "nine", "ten", | 
|  | }; | 
|  |  | 
|  | static const struct typelen { | 
|  | const char *type; | 
|  | int length; | 
|  | } typelen[] = { | 
|  | { "seconds", 1 }, | 
|  | { "minutes", 60 }, | 
|  | { "hours", 60*60 }, | 
|  | { "days", 24*60*60 }, | 
|  | { "weeks", 7*24*60*60 }, | 
|  | { NULL } | 
|  | }; | 
|  |  | 
|  | static const char *approxidate_alpha(const char *date, struct tm *tm, struct tm *now, int *num, int *touched) | 
|  | { | 
|  | const struct typelen *tl; | 
|  | const struct special *s; | 
|  | const char *end = date; | 
|  | int i; | 
|  |  | 
|  | while (isalpha(*++end)); | 
|  | ; | 
|  |  | 
|  | for (i = 0; i < 12; i++) { | 
|  | int match = match_string(date, month_names[i]); | 
|  | if (match >= 3) { | 
|  | tm->tm_mon = i; | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (s = special; s->name; s++) { | 
|  | int len = strlen(s->name); | 
|  | if (match_string(date, s->name) == len) { | 
|  | s->fn(tm, now, num); | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!*num) { | 
|  | for (i = 1; i < 11; i++) { | 
|  | int len = strlen(number_name[i]); | 
|  | if (match_string(date, number_name[i]) == len) { | 
|  | *num = i; | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  | } | 
|  | if (match_string(date, "last") == 4) { | 
|  | *num = 1; | 
|  | *touched = 1; | 
|  | } | 
|  | return end; | 
|  | } | 
|  |  | 
|  | tl = typelen; | 
|  | while (tl->type) { | 
|  | int len = strlen(tl->type); | 
|  | if (match_string(date, tl->type) >= len-1) { | 
|  | update_tm(tm, now, tl->length * *num); | 
|  | *num = 0; | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  | tl++; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 7; i++) { | 
|  | int match = match_string(date, weekday_names[i]); | 
|  | if (match >= 3) { | 
|  | int diff, n = *num -1; | 
|  | *num = 0; | 
|  |  | 
|  | diff = tm->tm_wday - i; | 
|  | if (diff <= 0) | 
|  | n++; | 
|  | diff += 7*n; | 
|  |  | 
|  | update_tm(tm, now, diff * 24 * 60 * 60); | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (match_string(date, "months") >= 5) { | 
|  | int n; | 
|  | update_tm(tm, now, 0); /* fill in date fields if needed */ | 
|  | n = tm->tm_mon - *num; | 
|  | *num = 0; | 
|  | while (n < 0) { | 
|  | n += 12; | 
|  | tm->tm_year--; | 
|  | } | 
|  | tm->tm_mon = n; | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  |  | 
|  | if (match_string(date, "years") >= 4) { | 
|  | update_tm(tm, now, 0); /* fill in date fields if needed */ | 
|  | tm->tm_year -= *num; | 
|  | *num = 0; | 
|  | *touched = 1; | 
|  | return end; | 
|  | } | 
|  |  | 
|  | return end; | 
|  | } | 
|  |  | 
|  | static const char *approxidate_digit(const char *date, struct tm *tm, int *num) | 
|  | { | 
|  | char *end; | 
|  | unsigned long number = strtoul(date, &end, 10); | 
|  |  | 
|  | switch (*end) { | 
|  | case ':': | 
|  | case '.': | 
|  | case '/': | 
|  | case '-': | 
|  | if (isdigit(end[1])) { | 
|  | int match = match_multi_number(number, *end, date, end, tm); | 
|  | if (match) | 
|  | return date + match; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Accept zero-padding only for small numbers ("Dec 02", never "Dec 0002") */ | 
|  | if (date[0] != '0' || end - date <= 2) | 
|  | *num = number; | 
|  | return end; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do we have a pending number at the end, or when | 
|  | * we see a new one? Let's assume it's a month day, | 
|  | * as in "Dec 6, 1992" | 
|  | */ | 
|  | static void pending_number(struct tm *tm, int *num) | 
|  | { | 
|  | int number = *num; | 
|  |  | 
|  | if (number) { | 
|  | *num = 0; | 
|  | if (tm->tm_mday < 0 && number < 32) | 
|  | tm->tm_mday = number; | 
|  | else if (tm->tm_mon < 0 && number < 13) | 
|  | tm->tm_mon = number-1; | 
|  | else if (tm->tm_year < 0) { | 
|  | if (number > 1969 && number < 2100) | 
|  | tm->tm_year = number - 1900; | 
|  | else if (number > 69 && number < 100) | 
|  | tm->tm_year = number; | 
|  | else if (number < 38) | 
|  | tm->tm_year = 100 + number; | 
|  | /* We screw up for number = 00 ? */ | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned long approxidate_str(const char *date, | 
|  | const struct timeval *tv, | 
|  | int *error_ret) | 
|  | { | 
|  | int number = 0; | 
|  | int touched = 0; | 
|  | struct tm tm, now; | 
|  | time_t time_sec; | 
|  |  | 
|  | time_sec = tv->tv_sec; | 
|  | localtime_r(&time_sec, &tm); | 
|  | now = tm; | 
|  |  | 
|  | tm.tm_year = -1; | 
|  | tm.tm_mon = -1; | 
|  | tm.tm_mday = -1; | 
|  |  | 
|  | for (;;) { | 
|  | unsigned char c = *date; | 
|  | if (!c) | 
|  | break; | 
|  | date++; | 
|  | if (isdigit(c)) { | 
|  | pending_number(&tm, &number); | 
|  | date = approxidate_digit(date-1, &tm, &number); | 
|  | touched = 1; | 
|  | continue; | 
|  | } | 
|  | if (isalpha(c)) | 
|  | date = approxidate_alpha(date-1, &tm, &now, &number, &touched); | 
|  | } | 
|  | pending_number(&tm, &number); | 
|  | if (!touched) | 
|  | *error_ret = 1; | 
|  | return update_tm(&tm, &now, 0); | 
|  | } | 
|  |  | 
|  | unsigned long approxidate_relative(const char *date, const struct timeval *tv) | 
|  | { | 
|  | char buffer[50]; | 
|  | int errors = 0; | 
|  |  | 
|  | if (parse_date(date, buffer, sizeof(buffer)) > 0) | 
|  | return strtoul(buffer, NULL, 0); | 
|  |  | 
|  | return approxidate_str(date, tv, &errors); | 
|  | } | 
|  |  | 
|  | unsigned long approxidate_careful(const char *date, int *error_ret) | 
|  | { | 
|  | struct timeval tv; | 
|  | char buffer[50]; | 
|  | int dummy = 0; | 
|  | if (!error_ret) | 
|  | error_ret = &dummy; | 
|  |  | 
|  | if (parse_date(date, buffer, sizeof(buffer)) > 0) { | 
|  | *error_ret = 0; | 
|  | return strtoul(buffer, NULL, 0); | 
|  | } | 
|  |  | 
|  | gettimeofday(&tv, NULL); | 
|  | return approxidate_str(date, &tv, error_ret); | 
|  | } |