| /* | |
| * SHA1 routine optimized to do word accesses rather than byte accesses, | |
| * and to avoid unnecessary copies into the context array. | |
| * | |
| * This was initially based on the Mozilla SHA1 implementation, although | |
| * none of the original Mozilla code remains. | |
| */ | |
| /* this is only to get definitions for memcpy(), ntohl() and htonl() */ | |
| #include "../git-compat-util.h" | |
| #include "sha1.h" | |
| #if defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__)) | |
| /* | |
| * Force usage of rol or ror by selecting the one with the smaller constant. | |
| * It _can_ generate slightly smaller code (a constant of 1 is special), but | |
| * perhaps more importantly it's possibly faster on any uarch that does a | |
| * rotate with a loop. | |
| */ | |
| #define SHA_ASM(op, x, n) ({ unsigned int __res; __asm__(op " %1,%0":"=r" (__res):"i" (n), "0" (x)); __res; }) | |
| #define SHA_ROL(x,n) SHA_ASM("rol", x, n) | |
| #define SHA_ROR(x,n) SHA_ASM("ror", x, n) | |
| #else | |
| #define SHA_ROT(X,l,r) (((X) << (l)) | ((X) >> (r))) | |
| #define SHA_ROL(X,n) SHA_ROT(X,n,32-(n)) | |
| #define SHA_ROR(X,n) SHA_ROT(X,32-(n),n) | |
| #endif | |
| /* | |
| * If you have 32 registers or more, the compiler can (and should) | |
| * try to change the array[] accesses into registers. However, on | |
| * machines with less than ~25 registers, that won't really work, | |
| * and at least gcc will make an unholy mess of it. | |
| * | |
| * So to avoid that mess which just slows things down, we force | |
| * the stores to memory to actually happen (we might be better off | |
| * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as | |
| * suggested by Artur Skawina - that will also make gcc unable to | |
| * try to do the silly "optimize away loads" part because it won't | |
| * see what the value will be). | |
| * | |
| * Ben Herrenschmidt reports that on PPC, the C version comes close | |
| * to the optimized asm with this (ie on PPC you don't want that | |
| * 'volatile', since there are lots of registers). | |
| * | |
| * On ARM we get the best code generation by forcing a full memory barrier | |
| * between each SHA_ROUND, otherwise gcc happily get wild with spilling and | |
| * the stack frame size simply explode and performance goes down the drain. | |
| */ | |
| #if defined(__i386__) || defined(__x86_64__) | |
| #define setW(x, val) (*(volatile unsigned int *)&W(x) = (val)) | |
| #elif defined(__GNUC__) && defined(__arm__) | |
| #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0) | |
| #else | |
| #define setW(x, val) (W(x) = (val)) | |
| #endif | |
| /* | |
| * Performance might be improved if the CPU architecture is OK with | |
| * unaligned 32-bit loads and a fast ntohl() is available. | |
| * Otherwise fall back to byte loads and shifts which is portable, | |
| * and is faster on architectures with memory alignment issues. | |
| */ | |
| #if defined(__i386__) || defined(__x86_64__) || \ | |
| defined(_M_IX86) || defined(_M_X64) || \ | |
| defined(__ppc__) || defined(__ppc64__) || \ | |
| defined(__powerpc__) || defined(__powerpc64__) || \ | |
| defined(__s390__) || defined(__s390x__) | |
| #define get_be32(p) ntohl(*(unsigned int *)(p)) | |
| #define put_be32(p, v) do { *(unsigned int *)(p) = htonl(v); } while (0) | |
| #else | |
| #define get_be32(p) ( \ | |
| (*((unsigned char *)(p) + 0) << 24) | \ | |
| (*((unsigned char *)(p) + 1) << 16) | \ | |
| (*((unsigned char *)(p) + 2) << 8) | \ | |
| (*((unsigned char *)(p) + 3) << 0) ) | |
| #define put_be32(p, v) do { \ | |
| unsigned int __v = (v); \ | |
| *((unsigned char *)(p) + 0) = __v >> 24; \ | |
| *((unsigned char *)(p) + 1) = __v >> 16; \ | |
| *((unsigned char *)(p) + 2) = __v >> 8; \ | |
| *((unsigned char *)(p) + 3) = __v >> 0; } while (0) | |
| #endif | |
| /* This "rolls" over the 512-bit array */ | |
| #define W(x) (array[(x)&15]) | |
| /* | |
| * Where do we get the source from? The first 16 iterations get it from | |
| * the input data, the next mix it from the 512-bit array. | |
| */ | |
| #define SHA_SRC(t) get_be32((unsigned char *) block + (t)*4) | |
| #define SHA_MIX(t) SHA_ROL(W((t)+13) ^ W((t)+8) ^ W((t)+2) ^ W(t), 1); | |
| #define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \ | |
| unsigned int TEMP = input(t); setW(t, TEMP); \ | |
| E += TEMP + SHA_ROL(A,5) + (fn) + (constant); \ | |
| B = SHA_ROR(B, 2); } while (0) | |
| #define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) | |
| #define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) | |
| #define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E ) | |
| #define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E ) | |
| #define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E ) | |
| static void blk_SHA1_Block(blk_SHA_CTX *ctx, const void *block) | |
| { | |
| unsigned int A,B,C,D,E; | |
| unsigned int array[16]; | |
| A = ctx->H[0]; | |
| B = ctx->H[1]; | |
| C = ctx->H[2]; | |
| D = ctx->H[3]; | |
| E = ctx->H[4]; | |
| /* Round 1 - iterations 0-16 take their input from 'block' */ | |
| T_0_15( 0, A, B, C, D, E); | |
| T_0_15( 1, E, A, B, C, D); | |
| T_0_15( 2, D, E, A, B, C); | |
| T_0_15( 3, C, D, E, A, B); | |
| T_0_15( 4, B, C, D, E, A); | |
| T_0_15( 5, A, B, C, D, E); | |
| T_0_15( 6, E, A, B, C, D); | |
| T_0_15( 7, D, E, A, B, C); | |
| T_0_15( 8, C, D, E, A, B); | |
| T_0_15( 9, B, C, D, E, A); | |
| T_0_15(10, A, B, C, D, E); | |
| T_0_15(11, E, A, B, C, D); | |
| T_0_15(12, D, E, A, B, C); | |
| T_0_15(13, C, D, E, A, B); | |
| T_0_15(14, B, C, D, E, A); | |
| T_0_15(15, A, B, C, D, E); | |
| /* Round 1 - tail. Input from 512-bit mixing array */ | |
| T_16_19(16, E, A, B, C, D); | |
| T_16_19(17, D, E, A, B, C); | |
| T_16_19(18, C, D, E, A, B); | |
| T_16_19(19, B, C, D, E, A); | |
| /* Round 2 */ | |
| T_20_39(20, A, B, C, D, E); | |
| T_20_39(21, E, A, B, C, D); | |
| T_20_39(22, D, E, A, B, C); | |
| T_20_39(23, C, D, E, A, B); | |
| T_20_39(24, B, C, D, E, A); | |
| T_20_39(25, A, B, C, D, E); | |
| T_20_39(26, E, A, B, C, D); | |
| T_20_39(27, D, E, A, B, C); | |
| T_20_39(28, C, D, E, A, B); | |
| T_20_39(29, B, C, D, E, A); | |
| T_20_39(30, A, B, C, D, E); | |
| T_20_39(31, E, A, B, C, D); | |
| T_20_39(32, D, E, A, B, C); | |
| T_20_39(33, C, D, E, A, B); | |
| T_20_39(34, B, C, D, E, A); | |
| T_20_39(35, A, B, C, D, E); | |
| T_20_39(36, E, A, B, C, D); | |
| T_20_39(37, D, E, A, B, C); | |
| T_20_39(38, C, D, E, A, B); | |
| T_20_39(39, B, C, D, E, A); | |
| /* Round 3 */ | |
| T_40_59(40, A, B, C, D, E); | |
| T_40_59(41, E, A, B, C, D); | |
| T_40_59(42, D, E, A, B, C); | |
| T_40_59(43, C, D, E, A, B); | |
| T_40_59(44, B, C, D, E, A); | |
| T_40_59(45, A, B, C, D, E); | |
| T_40_59(46, E, A, B, C, D); | |
| T_40_59(47, D, E, A, B, C); | |
| T_40_59(48, C, D, E, A, B); | |
| T_40_59(49, B, C, D, E, A); | |
| T_40_59(50, A, B, C, D, E); | |
| T_40_59(51, E, A, B, C, D); | |
| T_40_59(52, D, E, A, B, C); | |
| T_40_59(53, C, D, E, A, B); | |
| T_40_59(54, B, C, D, E, A); | |
| T_40_59(55, A, B, C, D, E); | |
| T_40_59(56, E, A, B, C, D); | |
| T_40_59(57, D, E, A, B, C); | |
| T_40_59(58, C, D, E, A, B); | |
| T_40_59(59, B, C, D, E, A); | |
| /* Round 4 */ | |
| T_60_79(60, A, B, C, D, E); | |
| T_60_79(61, E, A, B, C, D); | |
| T_60_79(62, D, E, A, B, C); | |
| T_60_79(63, C, D, E, A, B); | |
| T_60_79(64, B, C, D, E, A); | |
| T_60_79(65, A, B, C, D, E); | |
| T_60_79(66, E, A, B, C, D); | |
| T_60_79(67, D, E, A, B, C); | |
| T_60_79(68, C, D, E, A, B); | |
| T_60_79(69, B, C, D, E, A); | |
| T_60_79(70, A, B, C, D, E); | |
| T_60_79(71, E, A, B, C, D); | |
| T_60_79(72, D, E, A, B, C); | |
| T_60_79(73, C, D, E, A, B); | |
| T_60_79(74, B, C, D, E, A); | |
| T_60_79(75, A, B, C, D, E); | |
| T_60_79(76, E, A, B, C, D); | |
| T_60_79(77, D, E, A, B, C); | |
| T_60_79(78, C, D, E, A, B); | |
| T_60_79(79, B, C, D, E, A); | |
| ctx->H[0] += A; | |
| ctx->H[1] += B; | |
| ctx->H[2] += C; | |
| ctx->H[3] += D; | |
| ctx->H[4] += E; | |
| } | |
| void blk_SHA1_Init(blk_SHA_CTX *ctx) | |
| { | |
| ctx->size = 0; | |
| /* Initialize H with the magic constants (see FIPS180 for constants) */ | |
| ctx->H[0] = 0x67452301; | |
| ctx->H[1] = 0xefcdab89; | |
| ctx->H[2] = 0x98badcfe; | |
| ctx->H[3] = 0x10325476; | |
| ctx->H[4] = 0xc3d2e1f0; | |
| } | |
| void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len) | |
| { | |
| unsigned int lenW = ctx->size & 63; | |
| ctx->size += len; | |
| /* Read the data into W and process blocks as they get full */ | |
| if (lenW) { | |
| unsigned int left = 64 - lenW; | |
| if (len < left) | |
| left = len; | |
| memcpy(lenW + (char *)ctx->W, data, left); | |
| lenW = (lenW + left) & 63; | |
| len -= left; | |
| data = ((const char *)data + left); | |
| if (lenW) | |
| return; | |
| blk_SHA1_Block(ctx, ctx->W); | |
| } | |
| while (len >= 64) { | |
| blk_SHA1_Block(ctx, data); | |
| data = ((const char *)data + 64); | |
| len -= 64; | |
| } | |
| if (len) | |
| memcpy(ctx->W, data, len); | |
| } | |
| void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx) | |
| { | |
| static const unsigned char pad[64] = { 0x80 }; | |
| unsigned int padlen[2]; | |
| int i; | |
| /* Pad with a binary 1 (ie 0x80), then zeroes, then length */ | |
| padlen[0] = htonl((uint32_t)(ctx->size >> 29)); | |
| padlen[1] = htonl((uint32_t)(ctx->size << 3)); | |
| i = ctx->size & 63; | |
| blk_SHA1_Update(ctx, pad, 1+ (63 & (55 - i))); | |
| blk_SHA1_Update(ctx, padlen, 8); | |
| /* Output hash */ | |
| for (i = 0; i < 5; i++) | |
| put_be32(hashout + i*4, ctx->H[i]); | |
| } |