|  | /* | 
|  | * Various trivial helper wrappers around standard functions | 
|  | */ | 
|  | #include "cache.h" | 
|  | #include "config.h" | 
|  |  | 
|  | static void do_nothing(size_t size) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void (*try_to_free_routine)(size_t size) = do_nothing; | 
|  |  | 
|  | static int memory_limit_check(size_t size, int gentle) | 
|  | { | 
|  | static size_t limit = 0; | 
|  | if (!limit) { | 
|  | limit = git_env_ulong("GIT_ALLOC_LIMIT", 0); | 
|  | if (!limit) | 
|  | limit = SIZE_MAX; | 
|  | } | 
|  | if (size > limit) { | 
|  | if (gentle) { | 
|  | error("attempting to allocate %"PRIuMAX" over limit %"PRIuMAX, | 
|  | (uintmax_t)size, (uintmax_t)limit); | 
|  | return -1; | 
|  | } else | 
|  | die("attempting to allocate %"PRIuMAX" over limit %"PRIuMAX, | 
|  | (uintmax_t)size, (uintmax_t)limit); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | try_to_free_t set_try_to_free_routine(try_to_free_t routine) | 
|  | { | 
|  | try_to_free_t old = try_to_free_routine; | 
|  | if (!routine) | 
|  | routine = do_nothing; | 
|  | try_to_free_routine = routine; | 
|  | return old; | 
|  | } | 
|  |  | 
|  | char *xstrdup(const char *str) | 
|  | { | 
|  | char *ret = strdup(str); | 
|  | if (!ret) { | 
|  | try_to_free_routine(strlen(str) + 1); | 
|  | ret = strdup(str); | 
|  | if (!ret) | 
|  | die("Out of memory, strdup failed"); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void *do_xmalloc(size_t size, int gentle) | 
|  | { | 
|  | void *ret; | 
|  |  | 
|  | if (memory_limit_check(size, gentle)) | 
|  | return NULL; | 
|  | ret = malloc(size); | 
|  | if (!ret && !size) | 
|  | ret = malloc(1); | 
|  | if (!ret) { | 
|  | try_to_free_routine(size); | 
|  | ret = malloc(size); | 
|  | if (!ret && !size) | 
|  | ret = malloc(1); | 
|  | if (!ret) { | 
|  | if (!gentle) | 
|  | die("Out of memory, malloc failed (tried to allocate %lu bytes)", | 
|  | (unsigned long)size); | 
|  | else { | 
|  | error("Out of memory, malloc failed (tried to allocate %lu bytes)", | 
|  | (unsigned long)size); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  | } | 
|  | #ifdef XMALLOC_POISON | 
|  | memset(ret, 0xA5, size); | 
|  | #endif | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void *xmalloc(size_t size) | 
|  | { | 
|  | return do_xmalloc(size, 0); | 
|  | } | 
|  |  | 
|  | static void *do_xmallocz(size_t size, int gentle) | 
|  | { | 
|  | void *ret; | 
|  | if (unsigned_add_overflows(size, 1)) { | 
|  | if (gentle) { | 
|  | error("Data too large to fit into virtual memory space."); | 
|  | return NULL; | 
|  | } else | 
|  | die("Data too large to fit into virtual memory space."); | 
|  | } | 
|  | ret = do_xmalloc(size + 1, gentle); | 
|  | if (ret) | 
|  | ((char*)ret)[size] = 0; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void *xmallocz(size_t size) | 
|  | { | 
|  | return do_xmallocz(size, 0); | 
|  | } | 
|  |  | 
|  | void *xmallocz_gently(size_t size) | 
|  | { | 
|  | return do_xmallocz(size, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of | 
|  | * "data" to the allocated memory, zero terminates the allocated memory, | 
|  | * and returns a pointer to the allocated memory. If the allocation fails, | 
|  | * the program dies. | 
|  | */ | 
|  | void *xmemdupz(const void *data, size_t len) | 
|  | { | 
|  | return memcpy(xmallocz(len), data, len); | 
|  | } | 
|  |  | 
|  | char *xstrndup(const char *str, size_t len) | 
|  | { | 
|  | char *p = memchr(str, '\0', len); | 
|  | return xmemdupz(str, p ? p - str : len); | 
|  | } | 
|  |  | 
|  | void *xrealloc(void *ptr, size_t size) | 
|  | { | 
|  | void *ret; | 
|  |  | 
|  | memory_limit_check(size, 0); | 
|  | ret = realloc(ptr, size); | 
|  | if (!ret && !size) | 
|  | ret = realloc(ptr, 1); | 
|  | if (!ret) { | 
|  | try_to_free_routine(size); | 
|  | ret = realloc(ptr, size); | 
|  | if (!ret && !size) | 
|  | ret = realloc(ptr, 1); | 
|  | if (!ret) | 
|  | die("Out of memory, realloc failed"); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void *xcalloc(size_t nmemb, size_t size) | 
|  | { | 
|  | void *ret; | 
|  |  | 
|  | if (unsigned_mult_overflows(nmemb, size)) | 
|  | die("data too large to fit into virtual memory space"); | 
|  |  | 
|  | memory_limit_check(size * nmemb, 0); | 
|  | ret = calloc(nmemb, size); | 
|  | if (!ret && (!nmemb || !size)) | 
|  | ret = calloc(1, 1); | 
|  | if (!ret) { | 
|  | try_to_free_routine(nmemb * size); | 
|  | ret = calloc(nmemb, size); | 
|  | if (!ret && (!nmemb || !size)) | 
|  | ret = calloc(1, 1); | 
|  | if (!ret) | 
|  | die("Out of memory, calloc failed"); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Limit size of IO chunks, because huge chunks only cause pain.  OS X | 
|  | * 64-bit is buggy, returning EINVAL if len >= INT_MAX; and even in | 
|  | * the absence of bugs, large chunks can result in bad latencies when | 
|  | * you decide to kill the process. | 
|  | * | 
|  | * We pick 8 MiB as our default, but if the platform defines SSIZE_MAX | 
|  | * that is smaller than that, clip it to SSIZE_MAX, as a call to | 
|  | * read(2) or write(2) larger than that is allowed to fail.  As the last | 
|  | * resort, we allow a port to pass via CFLAGS e.g. "-DMAX_IO_SIZE=value" | 
|  | * to override this, if the definition of SSIZE_MAX given by the platform | 
|  | * is broken. | 
|  | */ | 
|  | #ifndef MAX_IO_SIZE | 
|  | # define MAX_IO_SIZE_DEFAULT (8*1024*1024) | 
|  | # if defined(SSIZE_MAX) && (SSIZE_MAX < MAX_IO_SIZE_DEFAULT) | 
|  | #  define MAX_IO_SIZE SSIZE_MAX | 
|  | # else | 
|  | #  define MAX_IO_SIZE MAX_IO_SIZE_DEFAULT | 
|  | # endif | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * xopen() is the same as open(), but it die()s if the open() fails. | 
|  | */ | 
|  | int xopen(const char *path, int oflag, ...) | 
|  | { | 
|  | mode_t mode = 0; | 
|  | va_list ap; | 
|  |  | 
|  | /* | 
|  | * va_arg() will have undefined behavior if the specified type is not | 
|  | * compatible with the argument type. Since integers are promoted to | 
|  | * ints, we fetch the next argument as an int, and then cast it to a | 
|  | * mode_t to avoid undefined behavior. | 
|  | */ | 
|  | va_start(ap, oflag); | 
|  | if (oflag & O_CREAT) | 
|  | mode = va_arg(ap, int); | 
|  | va_end(ap); | 
|  |  | 
|  | for (;;) { | 
|  | int fd = open(path, oflag, mode); | 
|  | if (fd >= 0) | 
|  | return fd; | 
|  | if (errno == EINTR) | 
|  | continue; | 
|  |  | 
|  | if ((oflag & O_RDWR) == O_RDWR) | 
|  | die_errno(_("could not open '%s' for reading and writing"), path); | 
|  | else if ((oflag & O_WRONLY) == O_WRONLY) | 
|  | die_errno(_("could not open '%s' for writing"), path); | 
|  | else | 
|  | die_errno(_("could not open '%s' for reading"), path); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int handle_nonblock(int fd, short poll_events, int err) | 
|  | { | 
|  | struct pollfd pfd; | 
|  |  | 
|  | if (err != EAGAIN && err != EWOULDBLOCK) | 
|  | return 0; | 
|  |  | 
|  | pfd.fd = fd; | 
|  | pfd.events = poll_events; | 
|  |  | 
|  | /* | 
|  | * no need to check for errors, here; | 
|  | * a subsequent read/write will detect unrecoverable errors | 
|  | */ | 
|  | poll(&pfd, 1, -1); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xread() is the same a read(), but it automatically restarts read() | 
|  | * operations with a recoverable error (EAGAIN and EINTR). xread() | 
|  | * DOES NOT GUARANTEE that "len" bytes is read even if the data is available. | 
|  | */ | 
|  | ssize_t xread(int fd, void *buf, size_t len) | 
|  | { | 
|  | ssize_t nr; | 
|  | if (len > MAX_IO_SIZE) | 
|  | len = MAX_IO_SIZE; | 
|  | while (1) { | 
|  | nr = read(fd, buf, len); | 
|  | if (nr < 0) { | 
|  | if (errno == EINTR) | 
|  | continue; | 
|  | if (handle_nonblock(fd, POLLIN, errno)) | 
|  | continue; | 
|  | } | 
|  | return nr; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xwrite() is the same a write(), but it automatically restarts write() | 
|  | * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT | 
|  | * GUARANTEE that "len" bytes is written even if the operation is successful. | 
|  | */ | 
|  | ssize_t xwrite(int fd, const void *buf, size_t len) | 
|  | { | 
|  | ssize_t nr; | 
|  | if (len > MAX_IO_SIZE) | 
|  | len = MAX_IO_SIZE; | 
|  | while (1) { | 
|  | nr = write(fd, buf, len); | 
|  | if (nr < 0) { | 
|  | if (errno == EINTR) | 
|  | continue; | 
|  | if (handle_nonblock(fd, POLLOUT, errno)) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | return nr; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xpread() is the same as pread(), but it automatically restarts pread() | 
|  | * operations with a recoverable error (EAGAIN and EINTR). xpread() DOES | 
|  | * NOT GUARANTEE that "len" bytes is read even if the data is available. | 
|  | */ | 
|  | ssize_t xpread(int fd, void *buf, size_t len, off_t offset) | 
|  | { | 
|  | ssize_t nr; | 
|  | if (len > MAX_IO_SIZE) | 
|  | len = MAX_IO_SIZE; | 
|  | while (1) { | 
|  | nr = pread(fd, buf, len, offset); | 
|  | if ((nr < 0) && (errno == EAGAIN || errno == EINTR)) | 
|  | continue; | 
|  | return nr; | 
|  | } | 
|  | } | 
|  |  | 
|  | ssize_t read_in_full(int fd, void *buf, size_t count) | 
|  | { | 
|  | char *p = buf; | 
|  | ssize_t total = 0; | 
|  |  | 
|  | while (count > 0) { | 
|  | ssize_t loaded = xread(fd, p, count); | 
|  | if (loaded < 0) | 
|  | return -1; | 
|  | if (loaded == 0) | 
|  | return total; | 
|  | count -= loaded; | 
|  | p += loaded; | 
|  | total += loaded; | 
|  | } | 
|  |  | 
|  | return total; | 
|  | } | 
|  |  | 
|  | ssize_t write_in_full(int fd, const void *buf, size_t count) | 
|  | { | 
|  | const char *p = buf; | 
|  | ssize_t total = 0; | 
|  |  | 
|  | while (count > 0) { | 
|  | ssize_t written = xwrite(fd, p, count); | 
|  | if (written < 0) | 
|  | return -1; | 
|  | if (!written) { | 
|  | errno = ENOSPC; | 
|  | return -1; | 
|  | } | 
|  | count -= written; | 
|  | p += written; | 
|  | total += written; | 
|  | } | 
|  |  | 
|  | return total; | 
|  | } | 
|  |  | 
|  | ssize_t pread_in_full(int fd, void *buf, size_t count, off_t offset) | 
|  | { | 
|  | char *p = buf; | 
|  | ssize_t total = 0; | 
|  |  | 
|  | while (count > 0) { | 
|  | ssize_t loaded = xpread(fd, p, count, offset); | 
|  | if (loaded < 0) | 
|  | return -1; | 
|  | if (loaded == 0) | 
|  | return total; | 
|  | count -= loaded; | 
|  | p += loaded; | 
|  | total += loaded; | 
|  | offset += loaded; | 
|  | } | 
|  |  | 
|  | return total; | 
|  | } | 
|  |  | 
|  | int xdup(int fd) | 
|  | { | 
|  | int ret = dup(fd); | 
|  | if (ret < 0) | 
|  | die_errno("dup failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * xfopen() is the same as fopen(), but it die()s if the fopen() fails. | 
|  | */ | 
|  | FILE *xfopen(const char *path, const char *mode) | 
|  | { | 
|  | for (;;) { | 
|  | FILE *fp = fopen(path, mode); | 
|  | if (fp) | 
|  | return fp; | 
|  | if (errno == EINTR) | 
|  | continue; | 
|  |  | 
|  | if (*mode && mode[1] == '+') | 
|  | die_errno(_("could not open '%s' for reading and writing"), path); | 
|  | else if (*mode == 'w' || *mode == 'a') | 
|  | die_errno(_("could not open '%s' for writing"), path); | 
|  | else | 
|  | die_errno(_("could not open '%s' for reading"), path); | 
|  | } | 
|  | } | 
|  |  | 
|  | FILE *xfdopen(int fd, const char *mode) | 
|  | { | 
|  | FILE *stream = fdopen(fd, mode); | 
|  | if (stream == NULL) | 
|  | die_errno("Out of memory? fdopen failed"); | 
|  | return stream; | 
|  | } | 
|  |  | 
|  | FILE *fopen_for_writing(const char *path) | 
|  | { | 
|  | FILE *ret = fopen(path, "w"); | 
|  |  | 
|  | if (!ret && errno == EPERM) { | 
|  | if (!unlink(path)) | 
|  | ret = fopen(path, "w"); | 
|  | else | 
|  | errno = EPERM; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void warn_on_inaccessible(const char *path) | 
|  | { | 
|  | warning_errno(_("unable to access '%s'"), path); | 
|  | } | 
|  |  | 
|  | int warn_on_fopen_errors(const char *path) | 
|  | { | 
|  | if (errno != ENOENT && errno != ENOTDIR) { | 
|  | warn_on_inaccessible(path); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | FILE *fopen_or_warn(const char *path, const char *mode) | 
|  | { | 
|  | FILE *fp = fopen(path, mode); | 
|  |  | 
|  | if (fp) | 
|  | return fp; | 
|  |  | 
|  | warn_on_fopen_errors(path); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int xmkstemp(char *template) | 
|  | { | 
|  | int fd; | 
|  | char origtemplate[PATH_MAX]; | 
|  | strlcpy(origtemplate, template, sizeof(origtemplate)); | 
|  |  | 
|  | fd = mkstemp(template); | 
|  | if (fd < 0) { | 
|  | int saved_errno = errno; | 
|  | const char *nonrelative_template; | 
|  |  | 
|  | if (strlen(template) != strlen(origtemplate)) | 
|  | template = origtemplate; | 
|  |  | 
|  | nonrelative_template = absolute_path(template); | 
|  | errno = saved_errno; | 
|  | die_errno("Unable to create temporary file '%s'", | 
|  | nonrelative_template); | 
|  | } | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* Adapted from libiberty's mkstemp.c. */ | 
|  |  | 
|  | #undef TMP_MAX | 
|  | #define TMP_MAX 16384 | 
|  |  | 
|  | int git_mkstemps_mode(char *pattern, int suffix_len, int mode) | 
|  | { | 
|  | static const char letters[] = | 
|  | "abcdefghijklmnopqrstuvwxyz" | 
|  | "ABCDEFGHIJKLMNOPQRSTUVWXYZ" | 
|  | "0123456789"; | 
|  | static const int num_letters = 62; | 
|  | uint64_t value; | 
|  | struct timeval tv; | 
|  | char *template; | 
|  | size_t len; | 
|  | int fd, count; | 
|  |  | 
|  | len = strlen(pattern); | 
|  |  | 
|  | if (len < 6 + suffix_len) { | 
|  | errno = EINVAL; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (strncmp(&pattern[len - 6 - suffix_len], "XXXXXX", 6)) { | 
|  | errno = EINVAL; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Replace pattern's XXXXXX characters with randomness. | 
|  | * Try TMP_MAX different filenames. | 
|  | */ | 
|  | gettimeofday(&tv, NULL); | 
|  | value = ((size_t)(tv.tv_usec << 16)) ^ tv.tv_sec ^ getpid(); | 
|  | template = &pattern[len - 6 - suffix_len]; | 
|  | for (count = 0; count < TMP_MAX; ++count) { | 
|  | uint64_t v = value; | 
|  | /* Fill in the random bits. */ | 
|  | template[0] = letters[v % num_letters]; v /= num_letters; | 
|  | template[1] = letters[v % num_letters]; v /= num_letters; | 
|  | template[2] = letters[v % num_letters]; v /= num_letters; | 
|  | template[3] = letters[v % num_letters]; v /= num_letters; | 
|  | template[4] = letters[v % num_letters]; v /= num_letters; | 
|  | template[5] = letters[v % num_letters]; v /= num_letters; | 
|  |  | 
|  | fd = open(pattern, O_CREAT | O_EXCL | O_RDWR, mode); | 
|  | if (fd >= 0) | 
|  | return fd; | 
|  | /* | 
|  | * Fatal error (EPERM, ENOSPC etc). | 
|  | * It doesn't make sense to loop. | 
|  | */ | 
|  | if (errno != EEXIST) | 
|  | break; | 
|  | /* | 
|  | * This is a random value.  It is only necessary that | 
|  | * the next TMP_MAX values generated by adding 7777 to | 
|  | * VALUE are different with (module 2^32). | 
|  | */ | 
|  | value += 7777; | 
|  | } | 
|  | /* We return the null string if we can't find a unique file name.  */ | 
|  | pattern[0] = '\0'; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | int git_mkstemp_mode(char *pattern, int mode) | 
|  | { | 
|  | /* mkstemp is just mkstemps with no suffix */ | 
|  | return git_mkstemps_mode(pattern, 0, mode); | 
|  | } | 
|  |  | 
|  | int xmkstemp_mode(char *template, int mode) | 
|  | { | 
|  | int fd; | 
|  | char origtemplate[PATH_MAX]; | 
|  | strlcpy(origtemplate, template, sizeof(origtemplate)); | 
|  |  | 
|  | fd = git_mkstemp_mode(template, mode); | 
|  | if (fd < 0) { | 
|  | int saved_errno = errno; | 
|  | const char *nonrelative_template; | 
|  |  | 
|  | if (!template[0]) | 
|  | template = origtemplate; | 
|  |  | 
|  | nonrelative_template = absolute_path(template); | 
|  | errno = saved_errno; | 
|  | die_errno("Unable to create temporary file '%s'", | 
|  | nonrelative_template); | 
|  | } | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | static int warn_if_unremovable(const char *op, const char *file, int rc) | 
|  | { | 
|  | int err; | 
|  | if (!rc || errno == ENOENT) | 
|  | return 0; | 
|  | err = errno; | 
|  | warning_errno("unable to %s '%s'", op, file); | 
|  | errno = err; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int unlink_or_msg(const char *file, struct strbuf *err) | 
|  | { | 
|  | int rc = unlink(file); | 
|  |  | 
|  | assert(err); | 
|  |  | 
|  | if (!rc || errno == ENOENT) | 
|  | return 0; | 
|  |  | 
|  | strbuf_addf(err, "unable to unlink '%s': %s", | 
|  | file, strerror(errno)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | int unlink_or_warn(const char *file) | 
|  | { | 
|  | return warn_if_unremovable("unlink", file, unlink(file)); | 
|  | } | 
|  |  | 
|  | int rmdir_or_warn(const char *file) | 
|  | { | 
|  | return warn_if_unremovable("rmdir", file, rmdir(file)); | 
|  | } | 
|  |  | 
|  | int remove_or_warn(unsigned int mode, const char *file) | 
|  | { | 
|  | return S_ISGITLINK(mode) ? rmdir_or_warn(file) : unlink_or_warn(file); | 
|  | } | 
|  |  | 
|  | static int access_error_is_ok(int err, unsigned flag) | 
|  | { | 
|  | return (is_missing_file_error(err) || | 
|  | ((flag & ACCESS_EACCES_OK) && err == EACCES)); | 
|  | } | 
|  |  | 
|  | int access_or_warn(const char *path, int mode, unsigned flag) | 
|  | { | 
|  | int ret = access(path, mode); | 
|  | if (ret && !access_error_is_ok(errno, flag)) | 
|  | warn_on_inaccessible(path); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int access_or_die(const char *path, int mode, unsigned flag) | 
|  | { | 
|  | int ret = access(path, mode); | 
|  | if (ret && !access_error_is_ok(errno, flag)) | 
|  | die_errno(_("unable to access '%s'"), path); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | char *xgetcwd(void) | 
|  | { | 
|  | struct strbuf sb = STRBUF_INIT; | 
|  | if (strbuf_getcwd(&sb)) | 
|  | die_errno(_("unable to get current working directory")); | 
|  | return strbuf_detach(&sb, NULL); | 
|  | } | 
|  |  | 
|  | int xsnprintf(char *dst, size_t max, const char *fmt, ...) | 
|  | { | 
|  | va_list ap; | 
|  | int len; | 
|  |  | 
|  | va_start(ap, fmt); | 
|  | len = vsnprintf(dst, max, fmt, ap); | 
|  | va_end(ap); | 
|  |  | 
|  | if (len < 0) | 
|  | die("BUG: your snprintf is broken"); | 
|  | if (len >= max) | 
|  | die("BUG: attempt to snprintf into too-small buffer"); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | void write_file_buf(const char *path, const char *buf, size_t len) | 
|  | { | 
|  | int fd = xopen(path, O_WRONLY | O_CREAT | O_TRUNC, 0666); | 
|  | if (write_in_full(fd, buf, len) < 0) | 
|  | die_errno(_("could not write to '%s'"), path); | 
|  | if (close(fd)) | 
|  | die_errno(_("could not close '%s'"), path); | 
|  | } | 
|  |  | 
|  | void write_file(const char *path, const char *fmt, ...) | 
|  | { | 
|  | va_list params; | 
|  | struct strbuf sb = STRBUF_INIT; | 
|  |  | 
|  | va_start(params, fmt); | 
|  | strbuf_vaddf(&sb, fmt, params); | 
|  | va_end(params); | 
|  |  | 
|  | strbuf_complete_line(&sb); | 
|  |  | 
|  | write_file_buf(path, sb.buf, sb.len); | 
|  | strbuf_release(&sb); | 
|  | } | 
|  |  | 
|  | void sleep_millisec(int millisec) | 
|  | { | 
|  | poll(NULL, 0, millisec); | 
|  | } | 
|  |  | 
|  | int xgethostname(char *buf, size_t len) | 
|  | { | 
|  | /* | 
|  | * If the full hostname doesn't fit in buf, POSIX does not | 
|  | * specify whether the buffer will be null-terminated, so to | 
|  | * be safe, do it ourselves. | 
|  | */ | 
|  | int ret = gethostname(buf, len); | 
|  | if (!ret) | 
|  | buf[len - 1] = 0; | 
|  | return ret; | 
|  | } |