blob: a60776eb579e10507814c643cc292dfa99750aa9 [file] [log] [blame]
git-send-email(1)
=================
NAME
----
git-send-email - Send a collection of patches as emails
SYNOPSIS
--------
[verse]
'git send-email' [options] <file|directory|rev-list options>...
DESCRIPTION
-----------
Takes the patches given on the command line and emails them out.
Patches can be specified as files, directories (which will send all
files in the directory), or directly as a revision list. In the
last case, any format accepted by linkgit:git-format-patch[1] can
be passed to git send-email.
The header of the email is configurable via command-line options. If not
specified on the command line, the user will be prompted with a ReadLine
enabled interface to provide the necessary information.
There are two formats accepted for patch files:
1. mbox format files
+
This is what linkgit:git-format-patch[1] generates. Most headers and MIME
formatting are ignored.
2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl'
script
+
This format expects the first line of the file to contain the "Cc:" value
and the "Subject:" of the message as the second line.
OPTIONS
-------
Composing
~~~~~~~~~
--annotate::
Review and edit each patch you're about to send. Default is the value
of 'sendemail.annotate'. See the CONFIGURATION section for
'sendemail.multiedit'.
--bcc=<address>::
Specify a "Bcc:" value for each email. Default is the value of
'sendemail.bcc'.
+
The --bcc option must be repeated for each user you want on the bcc list.
--cc=<address>::
Specify a starting "Cc:" value for each email.
Default is the value of 'sendemail.cc'.
+
The --cc option must be repeated for each user you want on the cc list.
--compose::
Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
to edit an introductory message for the patch series.
+
When '--compose' is used, git send-email will use the From, Subject, and
In-Reply-To headers specified in the message. If the body of the message
(what you type after the headers and a blank line) only contains blank
(or Git: prefixed) lines, the summary won't be sent, but From, Subject,
and In-Reply-To headers will be used unless they are removed.
+
Missing From or In-Reply-To headers will be prompted for.
+
See the CONFIGURATION section for 'sendemail.multiedit'.
--from=<address>::
Specify the sender of the emails. If not specified on the command line,
the value of the 'sendemail.from' configuration option is used. If
neither the command-line option nor 'sendemail.from' are set, then the
user will be prompted for the value. The default for the prompt will be
the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
set, as returned by "git var -l".
--in-reply-to=<identifier>::
Make the first mail (or all the mails with `--no-thread`) appear as a
reply to the given Message-Id, which avoids breaking threads to
provide a new patch series.
The second and subsequent emails will be sent as replies according to
the `--[no]-chain-reply-to` setting.
+
So for example when `--thread` and `--no-chain-reply-to` are specified, the
second and subsequent patches will be replies to the first one like in the
illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`:
+
[PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation
+
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
--subject=<string>::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
--to=<address>::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the 'sendemail.to' configuration value; if that is unspecified,
and --to-cmd is not specified, this will be prompted for.
+
The --to option must be repeated for each user you want on the to list.
--8bit-encoding=<encoding>::
When encountering a non-ASCII message or subject that does not
declare its encoding, add headers/quoting to indicate it is
encoded in <encoding>. Default is the value of the
'sendemail.assume8bitEncoding'; if that is unspecified, this
will be prompted for if any non-ASCII files are encountered.
+
Note that no attempts whatsoever are made to validate the encoding.
--compose-encoding=<encoding>::
Specify encoding of compose message. Default is the value of the
'sendemail.composeencoding'; if that is unspecified, UTF-8 is assumed.
Sending
~~~~~~~
--envelope-sender=<address>::
Specify the envelope sender used to send the emails.
This is useful if your default address is not the address that is
subscribed to a list. In order to use the 'From' address, set the
value to "auto". If you use the sendmail binary, you must have
suitable privileges for the -f parameter. Default is the value of the
'sendemail.envelopesender' configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
--smtp-encryption=<encryption>::
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
'sendemail.smtpencryption'.
--smtp-domain=<FQDN>::
Specifies the Fully Qualified Domain Name (FQDN) used in the
HELO/EHLO command to the SMTP server. Some servers require the
FQDN to match your IP address. If not set, git send-email attempts
to determine your FQDN automatically. Default is the value of
'sendemail.smtpdomain'.
--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
the password. Default is the value of 'sendemail.smtppass',
however '--smtp-pass' always overrides this value.
+
Furthermore, passwords need not be specified in configuration files
or on the command line. If a username has been specified (with
'--smtp-user' or a 'sendemail.smtpuser'), but no password has been
specified (with '--smtp-pass' or 'sendemail.smtppass'), then
a password is obtained using 'git-credential'.
--smtp-server=<host>::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
the program must support the `-i` option. Default value can
be specified by the 'sendemail.smtpserver' configuration
option; the built-in default is `/usr/sbin/sendmail` or
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
servers typically listen to smtp port 25, but may also listen to
submission port 587, or the common SSL smtp port 465);
symbolic port names (e.g. "submission" instead of 587)
are also accepted. The port can also be set with the
'sendemail.smtpserverport' configuration variable.
--smtp-server-option=<option>::
If set, specifies the outgoing SMTP server option to use.
Default value can be specified by the 'sendemail.smtpserveroption'
configuration option.
+
The --smtp-server-option option must be repeated for each option you want
to pass to the server. Likewise, different lines in the configuration files
must be used for each option.
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
--smtp-ssl-cert-path::
Path to ca-certificates (either a directory or a single file).
Set it to an empty string to disable certificate verification.
Defaults to the value set to the 'sendemail.smtpsslcertpath'
configuration variable, if set, or `/etc/ssl/certs` otherwise.
--smtp-user=<user>::
Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
then authentication is not attempted.
--smtp-debug=0|1::
Enable (1) or disable (0) debug output. If enabled, SMTP
commands and replies will be printed. Useful to debug TLS
connection and authentication problems.
Automating
~~~~~~~~~~
--to-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "To:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.tocmd' configuration value.
--cc-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.cccmd' configuration value.
--[no-]chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
this, it is recommended that the first file given be an overview of the
entire patch series. Disabled by default, but the 'sendemail.chainreplyto'
configuration variable can be used to enable it.
--identity=<identity>::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
the value of 'sendemail.identity'.
--[no-]signed-off-by-cc::
If this is set, add emails found in Signed-off-by: or Cc: lines to the
cc list. Default is the value of 'sendemail.signedoffbycc' configuration
value; if that is unspecified, default to --signed-off-by-cc.
--[no-]cc-cover::
If this is set, emails found in Cc: headers in the first patch of
the series (typically the cover letter) are added to the cc list
for each email set. Default is the value of 'sendemail.cccover'
configuration value; if that is unspecified, default to --no-cc-cover.
--[no-]to-cover::
If this is set, emails found in To: headers in the first patch of
the series (typically the cover letter) are added to the to list
for each email set. Default is the value of 'sendemail.tocover'
configuration value; if that is unspecified, default to --no-to-cover.
--suppress-cc=<category>::
Specify an additional category of recipients to suppress the
auto-cc of:
+
--
- 'author' will avoid including the patch author
- 'self' will avoid including the sender
- 'cc' will avoid including anyone mentioned in Cc lines in the patch header
except for self (use 'self' for that).
- 'bodycc' will avoid including anyone mentioned in Cc lines in the
patch body (commit message) except for self (use 'self' for that).
- 'sob' will avoid including anyone mentioned in Signed-off-by lines except
for self (use 'self' for that).
- 'cccmd' will avoid running the --cc-cmd.
- 'body' is equivalent to 'sob' + 'bodycc'
- 'all' will suppress all auto cc values.
--
+
Default is the value of 'sendemail.suppresscc' configuration value; if
that is unspecified, default to 'self' if --suppress-from is
specified, as well as 'body' if --no-signed-off-cc is specified.
--[no-]suppress-from::
If this is set, do not add the From: address to the cc: list.
Default is the value of 'sendemail.suppressfrom' configuration
value; if that is unspecified, default to --no-suppress-from.
--[no-]thread::
If this is set, the In-Reply-To and References headers will be
added to each email sent. Whether each mail refers to the
previous email (`deep` threading per 'git format-patch'
wording) or to the first email (`shallow` threading) is
governed by "--[no-]chain-reply-to".
+
If disabled with "--no-thread", those headers will not be added
(unless specified with --in-reply-to). Default is the value of the
'sendemail.thread' configuration value; if that is unspecified,
default to --thread.
+
It is up to the user to ensure that no In-Reply-To header already
exists when 'git send-email' is asked to add it (especially note that
'git format-patch' can be configured to do the threading itself).
Failure to do so may not produce the expected result in the
recipient's MUA.
Administering
~~~~~~~~~~~~~
--confirm=<mode>::
Confirm just before sending:
+
--
- 'always' will always confirm before sending
- 'never' will never confirm before sending
- 'cc' will confirm before sending when send-email has automatically
added addresses from the patch to the Cc list
- 'compose' will confirm before sending the first message when using --compose.
- 'auto' is equivalent to 'cc' + 'compose'
--
+
Default is the value of 'sendemail.confirm' configuration value; if that
is unspecified, default to 'auto' unless any of the suppress options
have been specified, in which case default to 'compose'.
--dry-run::
Do everything except actually send the emails.
--[no-]format-patch::
When an argument may be understood either as a reference or as a file name,
choose to understand it as a format-patch argument ('--format-patch')
or as a file name ('--no-format-patch'). By default, when such a conflict
occurs, git send-email will fail.
--quiet::
Make git-send-email less verbose. One line per email should be
all that is output.
--[no-]validate::
Perform sanity checks on patches.
Currently, validation means the following:
+
--
* Warn of patches that contain lines longer than 998 characters; this
is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
--
+
Default is the value of 'sendemail.validate'; if this is not set,
default to '--validate'.
--force::
Send emails even if safety checks would prevent it.
CONFIGURATION
-------------
sendemail.aliasesfile::
To avoid typing long email addresses, point this to one or more
email aliases files. You must also supply 'sendemail.aliasfiletype'.
sendemail.aliasfiletype::
Format of the file(s) specified in sendemail.aliasesfile. Must be
one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'.
sendemail.multiedit::
If true (default), a single editor instance will be spawned to edit
files you have to edit (patches when '--annotate' is used, and the
summary when '--compose' is used). If false, files will be edited one
after the other, spawning a new editor each time.
sendemail.confirm::
Sets the default for whether to confirm before sending. Must be
one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
in the previous section for the meaning of these values.
EXAMPLE
-------
Use gmail as the smtp server
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To use 'git send-email' to send your patches through the GMail SMTP server,
edit ~/.gitconfig to specify your account settings:
[sendemail]
smtpencryption = tls
smtpserver = smtp.gmail.com
smtpuser = yourname@gmail.com
smtpserverport = 587
Once your commits are ready to be sent to the mailing list, run the
following commands:
$ git format-patch --cover-letter -M origin/master -o outgoing/
$ edit outgoing/0000-*
$ git send-email outgoing/*
Note: the following perl modules are required
Net::SMTP::SSL, MIME::Base64 and Authen::SASL
SEE ALSO
--------
linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
GIT
---
Part of the linkgit:git[1] suite