monitoring/apiv3/v2/monitoringpb/common.pb.go

// Copyright 2021 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// 	protoc-gen-go v1.26.0
// 	protoc        v3.12.2
// source: google/monitoring/v3/common.proto

package monitoringpb

import (
	reflect "reflect"
	sync "sync"

	duration "github.com/golang/protobuf/ptypes/duration"
	timestamp "github.com/golang/protobuf/ptypes/timestamp"
	distribution "google.golang.org/genproto/googleapis/api/distribution"
	protoreflect "google.golang.org/protobuf/reflect/protoreflect"
	protoimpl "google.golang.org/protobuf/runtime/protoimpl"
)

const (
	// Verify that this generated code is sufficiently up-to-date.
	_ = protoimpl.EnforceVersion(20 - protoimpl.MinVersion)
	// Verify that runtime/protoimpl is sufficiently up-to-date.
	_ = protoimpl.EnforceVersion(protoimpl.MaxVersion - 20)
)

// Specifies an ordering relationship on two arguments, called `left` and
// `right`.
type ComparisonType int32

const (
	// No ordering relationship is specified.
	ComparisonType_COMPARISON_UNSPECIFIED ComparisonType = 0
	// True if the left argument is greater than the right argument.
	ComparisonType_COMPARISON_GT ComparisonType = 1
	// True if the left argument is greater than or equal to the right argument.
	ComparisonType_COMPARISON_GE ComparisonType = 2
	// True if the left argument is less than the right argument.
	ComparisonType_COMPARISON_LT ComparisonType = 3
	// True if the left argument is less than or equal to the right argument.
	ComparisonType_COMPARISON_LE ComparisonType = 4
	// True if the left argument is equal to the right argument.
	ComparisonType_COMPARISON_EQ ComparisonType = 5
	// True if the left argument is not equal to the right argument.
	ComparisonType_COMPARISON_NE ComparisonType = 6
)

// Enum value maps for ComparisonType.
var (
	ComparisonType_name = map[int32]string{
		0: "COMPARISON_UNSPECIFIED",
		1: "COMPARISON_GT",
		2: "COMPARISON_GE",
		3: "COMPARISON_LT",
		4: "COMPARISON_LE",
		5: "COMPARISON_EQ",
		6: "COMPARISON_NE",
	}
	ComparisonType_value = map[string]int32{
		"COMPARISON_UNSPECIFIED": 0,
		"COMPARISON_GT":          1,
		"COMPARISON_GE":          2,
		"COMPARISON_LT":          3,
		"COMPARISON_LE":          4,
		"COMPARISON_EQ":          5,
		"COMPARISON_NE":          6,
	}
)

func (x ComparisonType) Enum() *ComparisonType {
	p := new(ComparisonType)
	*p = x
	return p
}

func (x ComparisonType) String() string {
	return protoimpl.X.EnumStringOf(x.Descriptor(), protoreflect.EnumNumber(x))
}

func (ComparisonType) Descriptor() protoreflect.EnumDescriptor {
	return file_google_monitoring_v3_common_proto_enumTypes[0].Descriptor()
}

func (ComparisonType) Type() protoreflect.EnumType {
	return &file_google_monitoring_v3_common_proto_enumTypes[0]
}

func (x ComparisonType) Number() protoreflect.EnumNumber {
	return protoreflect.EnumNumber(x)
}

// Deprecated: Use ComparisonType.Descriptor instead.
func (ComparisonType) EnumDescriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{0}
}

// The tier of service for a Workspace. Please see the
// [service tiers
// documentation](https://cloud.google.com/monitoring/workspaces/tiers) for more
// details.
//
// Deprecated: Do not use.
type ServiceTier int32

const (
	// An invalid sentinel value, used to indicate that a tier has not
	// been provided explicitly.
	ServiceTier_SERVICE_TIER_UNSPECIFIED ServiceTier = 0
	// The Stackdriver Basic tier, a free tier of service that provides basic
	// features, a moderate allotment of logs, and access to built-in metrics.
	// A number of features are not available in this tier. For more details,
	// see [the service tiers
	// documentation](https://cloud.google.com/monitoring/workspaces/tiers).
	ServiceTier_SERVICE_TIER_BASIC ServiceTier = 1
	// The Stackdriver Premium tier, a higher, more expensive tier of service
	// that provides access to all Stackdriver features, lets you use Stackdriver
	// with AWS accounts, and has a larger allotments for logs and metrics. For
	// more details, see [the service tiers
	// documentation](https://cloud.google.com/monitoring/workspaces/tiers).
	ServiceTier_SERVICE_TIER_PREMIUM ServiceTier = 2
)

// Enum value maps for ServiceTier.
var (
	ServiceTier_name = map[int32]string{
		0: "SERVICE_TIER_UNSPECIFIED",
		1: "SERVICE_TIER_BASIC",
		2: "SERVICE_TIER_PREMIUM",
	}
	ServiceTier_value = map[string]int32{
		"SERVICE_TIER_UNSPECIFIED": 0,
		"SERVICE_TIER_BASIC":       1,
		"SERVICE_TIER_PREMIUM":     2,
	}
)

func (x ServiceTier) Enum() *ServiceTier {
	p := new(ServiceTier)
	*p = x
	return p
}

func (x ServiceTier) String() string {
	return protoimpl.X.EnumStringOf(x.Descriptor(), protoreflect.EnumNumber(x))
}

func (ServiceTier) Descriptor() protoreflect.EnumDescriptor {
	return file_google_monitoring_v3_common_proto_enumTypes[1].Descriptor()
}

func (ServiceTier) Type() protoreflect.EnumType {
	return &file_google_monitoring_v3_common_proto_enumTypes[1]
}

func (x ServiceTier) Number() protoreflect.EnumNumber {
	return protoreflect.EnumNumber(x)
}

// Deprecated: Use ServiceTier.Descriptor instead.
func (ServiceTier) EnumDescriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{1}
}

// The `Aligner` specifies the operation that will be applied to the data
// points in each alignment period in a time series. Except for
// `ALIGN_NONE`, which specifies that no operation be applied, each alignment
// operation replaces the set of data values in each alignment period with
// a single value: the result of applying the operation to the data values.
// An aligned time series has a single data value at the end of each
// `alignment_period`.
//
// An alignment operation can change the data type of the values, too. For
// example, if you apply a counting operation to boolean values, the data
// `value_type` in the original time series is `BOOLEAN`, but the `value_type`
// in the aligned result is `INT64`.
type Aggregation_Aligner int32

const (
	// No alignment. Raw data is returned. Not valid if cross-series reduction
	// is requested. The `value_type` of the result is the same as the
	// `value_type` of the input.
	Aggregation_ALIGN_NONE Aggregation_Aligner = 0
	// Align and convert to
	// [DELTA][google.api.MetricDescriptor.MetricKind.DELTA].
	// The output is `delta = y1 - y0`.
	//
	// This alignment is valid for
	// [CUMULATIVE][google.api.MetricDescriptor.MetricKind.CUMULATIVE] and
	// `DELTA` metrics. If the selected alignment period results in periods
	// with no data, then the aligned value for such a period is created by
	// interpolation. The `value_type`  of the aligned result is the same as
	// the `value_type` of the input.
	Aggregation_ALIGN_DELTA Aggregation_Aligner = 1
	// Align and convert to a rate. The result is computed as
	// `rate = (y1 - y0)/(t1 - t0)`, or "delta over time".
	// Think of this aligner as providing the slope of the line that passes
	// through the value at the start and at the end of the `alignment_period`.
	//
	// This aligner is valid for `CUMULATIVE`
	// and `DELTA` metrics with numeric values. If the selected alignment
	// period results in periods with no data, then the aligned value for
	// such a period is created by interpolation. The output is a `GAUGE`
	// metric with `value_type` `DOUBLE`.
	//
	// If, by "rate", you mean "percentage change", see the
	// `ALIGN_PERCENT_CHANGE` aligner instead.
	Aggregation_ALIGN_RATE Aggregation_Aligner = 2
	// Align by interpolating between adjacent points around the alignment
	// period boundary. This aligner is valid for `GAUGE` metrics with
	// numeric values. The `value_type` of the aligned result is the same as the
	// `value_type` of the input.
	Aggregation_ALIGN_INTERPOLATE Aggregation_Aligner = 3
	// Align by moving the most recent data point before the end of the
	// alignment period to the boundary at the end of the alignment
	// period. This aligner is valid for `GAUGE` metrics. The `value_type` of
	// the aligned result is the same as the `value_type` of the input.
	Aggregation_ALIGN_NEXT_OLDER Aggregation_Aligner = 4
	// Align the time series by returning the minimum value in each alignment
	// period. This aligner is valid for `GAUGE` and `DELTA` metrics with
	// numeric values. The `value_type` of the aligned result is the same as
	// the `value_type` of the input.
	Aggregation_ALIGN_MIN Aggregation_Aligner = 10
	// Align the time series by returning the maximum value in each alignment
	// period. This aligner is valid for `GAUGE` and `DELTA` metrics with
	// numeric values. The `value_type` of the aligned result is the same as
	// the `value_type` of the input.
	Aggregation_ALIGN_MAX Aggregation_Aligner = 11
	// Align the time series by returning the mean value in each alignment
	// period. This aligner is valid for `GAUGE` and `DELTA` metrics with
	// numeric values. The `value_type` of the aligned result is `DOUBLE`.
	Aggregation_ALIGN_MEAN Aggregation_Aligner = 12
	// Align the time series by returning the number of values in each alignment
	// period. This aligner is valid for `GAUGE` and `DELTA` metrics with
	// numeric or Boolean values. The `value_type` of the aligned result is
	// `INT64`.
	Aggregation_ALIGN_COUNT Aggregation_Aligner = 13
	// Align the time series by returning the sum of the values in each
	// alignment period. This aligner is valid for `GAUGE` and `DELTA`
	// metrics with numeric and distribution values. The `value_type` of the
	// aligned result is the same as the `value_type` of the input.
	Aggregation_ALIGN_SUM Aggregation_Aligner = 14
	// Align the time series by returning the standard deviation of the values
	// in each alignment period. This aligner is valid for `GAUGE` and
	// `DELTA` metrics with numeric values. The `value_type` of the output is
	// `DOUBLE`.
	Aggregation_ALIGN_STDDEV Aggregation_Aligner = 15
	// Align the time series by returning the number of `True` values in
	// each alignment period. This aligner is valid for `GAUGE` metrics with
	// Boolean values. The `value_type` of the output is `INT64`.
	Aggregation_ALIGN_COUNT_TRUE Aggregation_Aligner = 16
	// Align the time series by returning the number of `False` values in
	// each alignment period. This aligner is valid for `GAUGE` metrics with
	// Boolean values. The `value_type` of the output is `INT64`.
	Aggregation_ALIGN_COUNT_FALSE Aggregation_Aligner = 24
	// Align the time series by returning the ratio of the number of `True`
	// values to the total number of values in each alignment period. This
	// aligner is valid for `GAUGE` metrics with Boolean values. The output
	// value is in the range [0.0, 1.0] and has `value_type` `DOUBLE`.
	Aggregation_ALIGN_FRACTION_TRUE Aggregation_Aligner = 17
	// Align the time series by using [percentile
	// aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
	// data point in each alignment period is the 99th percentile of all data
	// points in the period. This aligner is valid for `GAUGE` and `DELTA`
	// metrics with distribution values. The output is a `GAUGE` metric with
	// `value_type` `DOUBLE`.
	Aggregation_ALIGN_PERCENTILE_99 Aggregation_Aligner = 18
	// Align the time series by using [percentile
	// aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
	// data point in each alignment period is the 95th percentile of all data
	// points in the period. This aligner is valid for `GAUGE` and `DELTA`
	// metrics with distribution values. The output is a `GAUGE` metric with
	// `value_type` `DOUBLE`.
	Aggregation_ALIGN_PERCENTILE_95 Aggregation_Aligner = 19
	// Align the time series by using [percentile
	// aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
	// data point in each alignment period is the 50th percentile of all data
	// points in the period. This aligner is valid for `GAUGE` and `DELTA`
	// metrics with distribution values. The output is a `GAUGE` metric with
	// `value_type` `DOUBLE`.
	Aggregation_ALIGN_PERCENTILE_50 Aggregation_Aligner = 20
	// Align the time series by using [percentile
	// aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
	// data point in each alignment period is the 5th percentile of all data
	// points in the period. This aligner is valid for `GAUGE` and `DELTA`
	// metrics with distribution values. The output is a `GAUGE` metric with
	// `value_type` `DOUBLE`.
	Aggregation_ALIGN_PERCENTILE_05 Aggregation_Aligner = 21
	// Align and convert to a percentage change. This aligner is valid for
	// `GAUGE` and `DELTA` metrics with numeric values. This alignment returns
	// `((current - previous)/previous) * 100`, where the value of `previous` is
	// determined based on the `alignment_period`.
	//
	// If the values of `current` and `previous` are both 0, then the returned
	// value is 0. If only `previous` is 0, the returned value is infinity.
	//
	// A 10-minute moving mean is computed at each point of the alignment period
	// prior to the above calculation to smooth the metric and prevent false
	// positives from very short-lived spikes. The moving mean is only
	// applicable for data whose values are `>= 0`. Any values `< 0` are
	// treated as a missing datapoint, and are ignored. While `DELTA`
	// metrics are accepted by this alignment, special care should be taken that
	// the values for the metric will always be positive. The output is a
	// `GAUGE` metric with `value_type` `DOUBLE`.
	Aggregation_ALIGN_PERCENT_CHANGE Aggregation_Aligner = 23
)

// Enum value maps for Aggregation_Aligner.
var (
	Aggregation_Aligner_name = map[int32]string{
		0:  "ALIGN_NONE",
		1:  "ALIGN_DELTA",
		2:  "ALIGN_RATE",
		3:  "ALIGN_INTERPOLATE",
		4:  "ALIGN_NEXT_OLDER",
		10: "ALIGN_MIN",
		11: "ALIGN_MAX",
		12: "ALIGN_MEAN",
		13: "ALIGN_COUNT",
		14: "ALIGN_SUM",
		15: "ALIGN_STDDEV",
		16: "ALIGN_COUNT_TRUE",
		24: "ALIGN_COUNT_FALSE",
		17: "ALIGN_FRACTION_TRUE",
		18: "ALIGN_PERCENTILE_99",
		19: "ALIGN_PERCENTILE_95",
		20: "ALIGN_PERCENTILE_50",
		21: "ALIGN_PERCENTILE_05",
		23: "ALIGN_PERCENT_CHANGE",
	}
	Aggregation_Aligner_value = map[string]int32{
		"ALIGN_NONE":           0,
		"ALIGN_DELTA":          1,
		"ALIGN_RATE":           2,
		"ALIGN_INTERPOLATE":    3,
		"ALIGN_NEXT_OLDER":     4,
		"ALIGN_MIN":            10,
		"ALIGN_MAX":            11,
		"ALIGN_MEAN":           12,
		"ALIGN_COUNT":          13,
		"ALIGN_SUM":            14,
		"ALIGN_STDDEV":         15,
		"ALIGN_COUNT_TRUE":     16,
		"ALIGN_COUNT_FALSE":    24,
		"ALIGN_FRACTION_TRUE":  17,
		"ALIGN_PERCENTILE_99":  18,
		"ALIGN_PERCENTILE_95":  19,
		"ALIGN_PERCENTILE_50":  20,
		"ALIGN_PERCENTILE_05":  21,
		"ALIGN_PERCENT_CHANGE": 23,
	}
)

func (x Aggregation_Aligner) Enum() *Aggregation_Aligner {
	p := new(Aggregation_Aligner)
	*p = x
	return p
}

func (x Aggregation_Aligner) String() string {
	return protoimpl.X.EnumStringOf(x.Descriptor(), protoreflect.EnumNumber(x))
}

func (Aggregation_Aligner) Descriptor() protoreflect.EnumDescriptor {
	return file_google_monitoring_v3_common_proto_enumTypes[2].Descriptor()
}

func (Aggregation_Aligner) Type() protoreflect.EnumType {
	return &file_google_monitoring_v3_common_proto_enumTypes[2]
}

func (x Aggregation_Aligner) Number() protoreflect.EnumNumber {
	return protoreflect.EnumNumber(x)
}

// Deprecated: Use Aggregation_Aligner.Descriptor instead.
func (Aggregation_Aligner) EnumDescriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{2, 0}
}

// A Reducer operation describes how to aggregate data points from multiple
// time series into a single time series, where the value of each data point
// in the resulting series is a function of all the already aligned values in
// the input time series.
type Aggregation_Reducer int32

const (
	// No cross-time series reduction. The output of the `Aligner` is
	// returned.
	Aggregation_REDUCE_NONE Aggregation_Reducer = 0
	// Reduce by computing the mean value across time series for each
	// alignment period. This reducer is valid for
	// [DELTA][google.api.MetricDescriptor.MetricKind.DELTA] and
	// [GAUGE][google.api.MetricDescriptor.MetricKind.GAUGE] metrics with
	// numeric or distribution values. The `value_type` of the output is
	// [DOUBLE][google.api.MetricDescriptor.ValueType.DOUBLE].
	Aggregation_REDUCE_MEAN Aggregation_Reducer = 1
	// Reduce by computing the minimum value across time series for each
	// alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
	// with numeric values. The `value_type` of the output is the same as the
	// `value_type` of the input.
	Aggregation_REDUCE_MIN Aggregation_Reducer = 2
	// Reduce by computing the maximum value across time series for each
	// alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
	// with numeric values. The `value_type` of the output is the same as the
	// `value_type` of the input.
	Aggregation_REDUCE_MAX Aggregation_Reducer = 3
	// Reduce by computing the sum across time series for each
	// alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
	// with numeric and distribution values. The `value_type` of the output is
	// the same as the `value_type` of the input.
	Aggregation_REDUCE_SUM Aggregation_Reducer = 4
	// Reduce by computing the standard deviation across time series
	// for each alignment period. This reducer is valid for `DELTA` and
	// `GAUGE` metrics with numeric or distribution values. The `value_type`
	// of the output is `DOUBLE`.
	Aggregation_REDUCE_STDDEV Aggregation_Reducer = 5
	// Reduce by computing the number of data points across time series
	// for each alignment period. This reducer is valid for `DELTA` and
	// `GAUGE` metrics of numeric, Boolean, distribution, and string
	// `value_type`. The `value_type` of the output is `INT64`.
	Aggregation_REDUCE_COUNT Aggregation_Reducer = 6
	// Reduce by computing the number of `True`-valued data points across time
	// series for each alignment period. This reducer is valid for `DELTA` and
	// `GAUGE` metrics of Boolean `value_type`. The `value_type` of the output
	// is `INT64`.
	Aggregation_REDUCE_COUNT_TRUE Aggregation_Reducer = 7
	// Reduce by computing the number of `False`-valued data points across time
	// series for each alignment period. This reducer is valid for `DELTA` and
	// `GAUGE` metrics of Boolean `value_type`. The `value_type` of the output
	// is `INT64`.
	Aggregation_REDUCE_COUNT_FALSE Aggregation_Reducer = 15
	// Reduce by computing the ratio of the number of `True`-valued data points
	// to the total number of data points for each alignment period. This
	// reducer is valid for `DELTA` and `GAUGE` metrics of Boolean `value_type`.
	// The output value is in the range [0.0, 1.0] and has `value_type`
	// `DOUBLE`.
	Aggregation_REDUCE_FRACTION_TRUE Aggregation_Reducer = 8
	// Reduce by computing the [99th
	// percentile](https://en.wikipedia.org/wiki/Percentile) of data points
	// across time series for each alignment period. This reducer is valid for
	// `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
	// of the output is `DOUBLE`.
	Aggregation_REDUCE_PERCENTILE_99 Aggregation_Reducer = 9
	// Reduce by computing the [95th
	// percentile](https://en.wikipedia.org/wiki/Percentile) of data points
	// across time series for each alignment period. This reducer is valid for
	// `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
	// of the output is `DOUBLE`.
	Aggregation_REDUCE_PERCENTILE_95 Aggregation_Reducer = 10
	// Reduce by computing the [50th
	// percentile](https://en.wikipedia.org/wiki/Percentile) of data points
	// across time series for each alignment period. This reducer is valid for
	// `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
	// of the output is `DOUBLE`.
	Aggregation_REDUCE_PERCENTILE_50 Aggregation_Reducer = 11
	// Reduce by computing the [5th
	// percentile](https://en.wikipedia.org/wiki/Percentile) of data points
	// across time series for each alignment period. This reducer is valid for
	// `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
	// of the output is `DOUBLE`.
	Aggregation_REDUCE_PERCENTILE_05 Aggregation_Reducer = 12
)

// Enum value maps for Aggregation_Reducer.
var (
	Aggregation_Reducer_name = map[int32]string{
		0:  "REDUCE_NONE",
		1:  "REDUCE_MEAN",
		2:  "REDUCE_MIN",
		3:  "REDUCE_MAX",
		4:  "REDUCE_SUM",
		5:  "REDUCE_STDDEV",
		6:  "REDUCE_COUNT",
		7:  "REDUCE_COUNT_TRUE",
		15: "REDUCE_COUNT_FALSE",
		8:  "REDUCE_FRACTION_TRUE",
		9:  "REDUCE_PERCENTILE_99",
		10: "REDUCE_PERCENTILE_95",
		11: "REDUCE_PERCENTILE_50",
		12: "REDUCE_PERCENTILE_05",
	}
	Aggregation_Reducer_value = map[string]int32{
		"REDUCE_NONE":          0,
		"REDUCE_MEAN":          1,
		"REDUCE_MIN":           2,
		"REDUCE_MAX":           3,
		"REDUCE_SUM":           4,
		"REDUCE_STDDEV":        5,
		"REDUCE_COUNT":         6,
		"REDUCE_COUNT_TRUE":    7,
		"REDUCE_COUNT_FALSE":   15,
		"REDUCE_FRACTION_TRUE": 8,
		"REDUCE_PERCENTILE_99": 9,
		"REDUCE_PERCENTILE_95": 10,
		"REDUCE_PERCENTILE_50": 11,
		"REDUCE_PERCENTILE_05": 12,
	}
)

func (x Aggregation_Reducer) Enum() *Aggregation_Reducer {
	p := new(Aggregation_Reducer)
	*p = x
	return p
}

func (x Aggregation_Reducer) String() string {
	return protoimpl.X.EnumStringOf(x.Descriptor(), protoreflect.EnumNumber(x))
}

func (Aggregation_Reducer) Descriptor() protoreflect.EnumDescriptor {
	return file_google_monitoring_v3_common_proto_enumTypes[3].Descriptor()
}

func (Aggregation_Reducer) Type() protoreflect.EnumType {
	return &file_google_monitoring_v3_common_proto_enumTypes[3]
}

func (x Aggregation_Reducer) Number() protoreflect.EnumNumber {
	return protoreflect.EnumNumber(x)
}

// Deprecated: Use Aggregation_Reducer.Descriptor instead.
func (Aggregation_Reducer) EnumDescriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{2, 1}
}

// A single strongly-typed value.
type TypedValue struct {
	state         protoimpl.MessageState
	sizeCache     protoimpl.SizeCache
	unknownFields protoimpl.UnknownFields

	// The typed value field.
	//
	// Types that are assignable to Value:
	//
	//	*TypedValue_BoolValue
	//	*TypedValue_Int64Value
	//	*TypedValue_DoubleValue
	//	*TypedValue_StringValue
	//	*TypedValue_DistributionValue
	Value isTypedValue_Value `protobuf_oneof:"value"`
}

func (x *TypedValue) Reset() {
	*x = TypedValue{}
	if protoimpl.UnsafeEnabled {
		mi := &file_google_monitoring_v3_common_proto_msgTypes[0]
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		ms.StoreMessageInfo(mi)
	}
}

func (x *TypedValue) String() string {
	return protoimpl.X.MessageStringOf(x)
}

func (*TypedValue) ProtoMessage() {}

func (x *TypedValue) ProtoReflect() protoreflect.Message {
	mi := &file_google_monitoring_v3_common_proto_msgTypes[0]
	if protoimpl.UnsafeEnabled && x != nil {
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		if ms.LoadMessageInfo() == nil {
			ms.StoreMessageInfo(mi)
		}
		return ms
	}
	return mi.MessageOf(x)
}

// Deprecated: Use TypedValue.ProtoReflect.Descriptor instead.
func (*TypedValue) Descriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{0}
}

func (m *TypedValue) GetValue() isTypedValue_Value {
	if m != nil {
		return m.Value
	}
	return nil
}

func (x *TypedValue) GetBoolValue() bool {
	if x, ok := x.GetValue().(*TypedValue_BoolValue); ok {
		return x.BoolValue
	}
	return false
}

func (x *TypedValue) GetInt64Value() int64 {
	if x, ok := x.GetValue().(*TypedValue_Int64Value); ok {
		return x.Int64Value
	}
	return 0
}

func (x *TypedValue) GetDoubleValue() float64 {
	if x, ok := x.GetValue().(*TypedValue_DoubleValue); ok {
		return x.DoubleValue
	}
	return 0
}

func (x *TypedValue) GetStringValue() string {
	if x, ok := x.GetValue().(*TypedValue_StringValue); ok {
		return x.StringValue
	}
	return ""
}

func (x *TypedValue) GetDistributionValue() *distribution.Distribution {
	if x, ok := x.GetValue().(*TypedValue_DistributionValue); ok {
		return x.DistributionValue
	}
	return nil
}

type isTypedValue_Value interface {
	isTypedValue_Value()
}

type TypedValue_BoolValue struct {
	// A Boolean value: `true` or `false`.
	BoolValue bool `protobuf:"varint,1,opt,name=bool_value,json=boolValue,proto3,oneof"`
}

type TypedValue_Int64Value struct {
	// A 64-bit integer. Its range is approximately &plusmn;9.2x10<sup>18</sup>.
	Int64Value int64 `protobuf:"varint,2,opt,name=int64_value,json=int64Value,proto3,oneof"`
}

type TypedValue_DoubleValue struct {
	// A 64-bit double-precision floating-point number. Its magnitude
	// is approximately &plusmn;10<sup>&plusmn;300</sup> and it has 16
	// significant digits of precision.
	DoubleValue float64 `protobuf:"fixed64,3,opt,name=double_value,json=doubleValue,proto3,oneof"`
}

type TypedValue_StringValue struct {
	// A variable-length string value.
	StringValue string `protobuf:"bytes,4,opt,name=string_value,json=stringValue,proto3,oneof"`
}

type TypedValue_DistributionValue struct {
	// A distribution value.
	DistributionValue *distribution.Distribution `protobuf:"bytes,5,opt,name=distribution_value,json=distributionValue,proto3,oneof"`
}

func (*TypedValue_BoolValue) isTypedValue_Value() {}

func (*TypedValue_Int64Value) isTypedValue_Value() {}

func (*TypedValue_DoubleValue) isTypedValue_Value() {}

func (*TypedValue_StringValue) isTypedValue_Value() {}

func (*TypedValue_DistributionValue) isTypedValue_Value() {}

// A closed time interval. It extends from the start time to the end time, and includes both: `[startTime, endTime]`. Valid time intervals depend on the [`MetricKind`](https://cloud.google.com/monitoring/api/ref_v3/rest/v3/projects.metricDescriptors#MetricKind) of the metric value. The end time must not be earlier than the start time. When writing data points, the start time must not be more than 25 hours in the past and the end time must not be more than five minutes in the future.
//
//   - For `GAUGE` metrics, the `startTime` value is technically optional; if
//     no value is specified, the start time defaults to the value of the
//     end time, and the interval represents a single point in time. If both
//     start and end times are specified, they must be identical. Such an
//     interval is valid only for `GAUGE` metrics, which are point-in-time
//     measurements. The end time of a new interval must be at least a
//     millisecond after the end time of the previous interval.
//
//   - For `DELTA` metrics, the start time and end time must specify a
//     non-zero interval, with subsequent points specifying contiguous and
//     non-overlapping intervals. For `DELTA` metrics, the start time of
//     the next interval must be at least a millisecond after the end time
//     of the previous interval.
//
//   - For `CUMULATIVE` metrics, the start time and end time must specify a
//     non-zero interval, with subsequent points specifying the same
//     start time and increasing end times, until an event resets the
//     cumulative value to zero and sets a new start time for the following
//     points. The new start time must be at least a millisecond after the
//     end time of the previous interval.
//
//   - The start time of a new interval must be at least a millisecond after the
//     end time of the previous interval because intervals are closed. If the
//     start time of a new interval is the same as the end time of the previous
//     interval, then data written at the new start time could overwrite data
//     written at the previous end time.
type TimeInterval struct {
	state         protoimpl.MessageState
	sizeCache     protoimpl.SizeCache
	unknownFields protoimpl.UnknownFields

	// Required. The end of the time interval.
	EndTime *timestamp.Timestamp `protobuf:"bytes,2,opt,name=end_time,json=endTime,proto3" json:"end_time,omitempty"`
	// Optional. The beginning of the time interval.  The default value
	// for the start time is the end time. The start time must not be
	// later than the end time.
	StartTime *timestamp.Timestamp `protobuf:"bytes,1,opt,name=start_time,json=startTime,proto3" json:"start_time,omitempty"`
}

func (x *TimeInterval) Reset() {
	*x = TimeInterval{}
	if protoimpl.UnsafeEnabled {
		mi := &file_google_monitoring_v3_common_proto_msgTypes[1]
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		ms.StoreMessageInfo(mi)
	}
}

func (x *TimeInterval) String() string {
	return protoimpl.X.MessageStringOf(x)
}

func (*TimeInterval) ProtoMessage() {}

func (x *TimeInterval) ProtoReflect() protoreflect.Message {
	mi := &file_google_monitoring_v3_common_proto_msgTypes[1]
	if protoimpl.UnsafeEnabled && x != nil {
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		if ms.LoadMessageInfo() == nil {
			ms.StoreMessageInfo(mi)
		}
		return ms
	}
	return mi.MessageOf(x)
}

// Deprecated: Use TimeInterval.ProtoReflect.Descriptor instead.
func (*TimeInterval) Descriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{1}
}

func (x *TimeInterval) GetEndTime() *timestamp.Timestamp {
	if x != nil {
		return x.EndTime
	}
	return nil
}

func (x *TimeInterval) GetStartTime() *timestamp.Timestamp {
	if x != nil {
		return x.StartTime
	}
	return nil
}

// Describes how to combine multiple time series to provide a different view of
// the data.  Aggregation of time series is done in two steps. First, each time
// series in the set is _aligned_ to the same time interval boundaries, then the
// set of time series is optionally _reduced_ in number.
//
// Alignment consists of applying the `per_series_aligner` operation
// to each time series after its data has been divided into regular
// `alignment_period` time intervals. This process takes _all_ of the data
// points in an alignment period, applies a mathematical transformation such as
// averaging, minimum, maximum, delta, etc., and converts them into a single
// data point per period.
//
// Reduction is when the aligned and transformed time series can optionally be
// combined, reducing the number of time series through similar mathematical
// transformations. Reduction involves applying a `cross_series_reducer` to
// all the time series, optionally sorting the time series into subsets with
// `group_by_fields`, and applying the reducer to each subset.
//
// The raw time series data can contain a huge amount of information from
// multiple sources. Alignment and reduction transforms this mass of data into
// a more manageable and representative collection of data, for example "the
// 95% latency across the average of all tasks in a cluster". This
// representative data can be more easily graphed and comprehended, and the
// individual time series data is still available for later drilldown. For more
// details, see [Filtering and
// aggregation](https://cloud.google.com/monitoring/api/v3/aggregation).
type Aggregation struct {
	state         protoimpl.MessageState
	sizeCache     protoimpl.SizeCache
	unknownFields protoimpl.UnknownFields

	// The `alignment_period` specifies a time interval, in seconds, that is used
	// to divide the data in all the
	// [time series][google.monitoring.v3.TimeSeries] into consistent blocks of
	// time. This will be done before the per-series aligner can be applied to
	// the data.
	//
	// The value must be at least 60 seconds. If a per-series
	// aligner other than `ALIGN_NONE` is specified, this field is required or an
	// error is returned. If no per-series aligner is specified, or the aligner
	// `ALIGN_NONE` is specified, then this field is ignored.
	//
	// The maximum value of the `alignment_period` is 104 weeks (2 years) for
	// charts, and 90,000 seconds (25 hours) for alerting policies.
	AlignmentPeriod *duration.Duration `protobuf:"bytes,1,opt,name=alignment_period,json=alignmentPeriod,proto3" json:"alignment_period,omitempty"`
	// An `Aligner` describes how to bring the data points in a single
	// time series into temporal alignment. Except for `ALIGN_NONE`, all
	// alignments cause all the data points in an `alignment_period` to be
	// mathematically grouped together, resulting in a single data point for
	// each `alignment_period` with end timestamp at the end of the period.
	//
	// Not all alignment operations may be applied to all time series. The valid
	// choices depend on the `metric_kind` and `value_type` of the original time
	// series. Alignment can change the `metric_kind` or the `value_type` of
	// the time series.
	//
	// Time series data must be aligned in order to perform cross-time
	// series reduction. If `cross_series_reducer` is specified, then
	// `per_series_aligner` must be specified and not equal to `ALIGN_NONE`
	// and `alignment_period` must be specified; otherwise, an error is
	// returned.
	PerSeriesAligner Aggregation_Aligner `protobuf:"varint,2,opt,name=per_series_aligner,json=perSeriesAligner,proto3,enum=google.monitoring.v3.Aggregation_Aligner" json:"per_series_aligner,omitempty"`
	// The reduction operation to be used to combine time series into a single
	// time series, where the value of each data point in the resulting series is
	// a function of all the already aligned values in the input time series.
	//
	// Not all reducer operations can be applied to all time series. The valid
	// choices depend on the `metric_kind` and the `value_type` of the original
	// time series. Reduction can yield a time series with a different
	// `metric_kind` or `value_type` than the input time series.
	//
	// Time series data must first be aligned (see `per_series_aligner`) in order
	// to perform cross-time series reduction. If `cross_series_reducer` is
	// specified, then `per_series_aligner` must be specified, and must not be
	// `ALIGN_NONE`. An `alignment_period` must also be specified; otherwise, an
	// error is returned.
	CrossSeriesReducer Aggregation_Reducer `protobuf:"varint,4,opt,name=cross_series_reducer,json=crossSeriesReducer,proto3,enum=google.monitoring.v3.Aggregation_Reducer" json:"cross_series_reducer,omitempty"`
	// The set of fields to preserve when `cross_series_reducer` is
	// specified. The `group_by_fields` determine how the time series are
	// partitioned into subsets prior to applying the aggregation
	// operation. Each subset contains time series that have the same
	// value for each of the grouping fields. Each individual time
	// series is a member of exactly one subset. The
	// `cross_series_reducer` is applied to each subset of time series.
	// It is not possible to reduce across different resource types, so
	// this field implicitly contains `resource.type`.  Fields not
	// specified in `group_by_fields` are aggregated away.  If
	// `group_by_fields` is not specified and all the time series have
	// the same resource type, then the time series are aggregated into
	// a single output time series. If `cross_series_reducer` is not
	// defined, this field is ignored.
	GroupByFields []string `protobuf:"bytes,5,rep,name=group_by_fields,json=groupByFields,proto3" json:"group_by_fields,omitempty"`
}

func (x *Aggregation) Reset() {
	*x = Aggregation{}
	if protoimpl.UnsafeEnabled {
		mi := &file_google_monitoring_v3_common_proto_msgTypes[2]
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		ms.StoreMessageInfo(mi)
	}
}

func (x *Aggregation) String() string {
	return protoimpl.X.MessageStringOf(x)
}

func (*Aggregation) ProtoMessage() {}

func (x *Aggregation) ProtoReflect() protoreflect.Message {
	mi := &file_google_monitoring_v3_common_proto_msgTypes[2]
	if protoimpl.UnsafeEnabled && x != nil {
		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
		if ms.LoadMessageInfo() == nil {
			ms.StoreMessageInfo(mi)
		}
		return ms
	}
	return mi.MessageOf(x)
}

// Deprecated: Use Aggregation.ProtoReflect.Descriptor instead.
func (*Aggregation) Descriptor() ([]byte, []int) {
	return file_google_monitoring_v3_common_proto_rawDescGZIP(), []int{2}
}

func (x *Aggregation) GetAlignmentPeriod() *duration.Duration {
	if x != nil {
		return x.AlignmentPeriod
	}
	return nil
}

func (x *Aggregation) GetPerSeriesAligner() Aggregation_Aligner {
	if x != nil {
		return x.PerSeriesAligner
	}
	return Aggregation_ALIGN_NONE
}

func (x *Aggregation) GetCrossSeriesReducer() Aggregation_Reducer {
	if x != nil {
		return x.CrossSeriesReducer
	}
	return Aggregation_REDUCE_NONE
}

func (x *Aggregation) GetGroupByFields() []string {
	if x != nil {
		return x.GroupByFields
	}
	return nil
}

var File_google_monitoring_v3_common_proto protoreflect.FileDescriptor

var file_google_monitoring_v3_common_proto_rawDesc = []byte{
	0x0a, 0x21, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2f, 0x6d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72,
	0x69, 0x6e, 0x67, 0x2f, 0x76, 0x33, 0x2f, 0x63, 0x6f, 0x6d, 0x6d, 0x6f, 0x6e, 0x2e, 0x70, 0x72,
	0x6f, 0x74, 0x6f, 0x12, 0x14, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x6d, 0x6f, 0x6e, 0x69,
	0x74, 0x6f, 0x72, 0x69, 0x6e, 0x67, 0x2e, 0x76, 0x33, 0x1a, 0x1d, 0x67, 0x6f, 0x6f, 0x67, 0x6c,
	0x65, 0x2f, 0x61, 0x70, 0x69, 0x2f, 0x64, 0x69, 0x73, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x69,
	0x6f, 0x6e, 0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x1a, 0x1e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65,
	0x2f, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2f, 0x64, 0x75, 0x72, 0x61, 0x74, 0x69,
	0x6f, 0x6e, 0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x1a, 0x1f, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65,
	0x2f, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2f, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74,
	0x61, 0x6d, 0x70, 0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x22, 0xee, 0x01, 0x0a, 0x0a, 0x54, 0x79,
	0x70, 0x65, 0x64, 0x56, 0x61, 0x6c, 0x75, 0x65, 0x12, 0x1f, 0x0a, 0x0a, 0x62, 0x6f, 0x6f, 0x6c,
	0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x18, 0x01, 0x20, 0x01, 0x28, 0x08, 0x48, 0x00, 0x52, 0x09,
	0x62, 0x6f, 0x6f, 0x6c, 0x56, 0x61, 0x6c, 0x75, 0x65, 0x12, 0x21, 0x0a, 0x0b, 0x69, 0x6e, 0x74,
	0x36, 0x34, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x18, 0x02, 0x20, 0x01, 0x28, 0x03, 0x48, 0x00,
	0x52, 0x0a, 0x69, 0x6e, 0x74, 0x36, 0x34, 0x56, 0x61, 0x6c, 0x75, 0x65, 0x12, 0x23, 0x0a, 0x0c,
	0x64, 0x6f, 0x75, 0x62, 0x6c, 0x65, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x18, 0x03, 0x20, 0x01,
	0x28, 0x01, 0x48, 0x00, 0x52, 0x0b, 0x64, 0x6f, 0x75, 0x62, 0x6c, 0x65, 0x56, 0x61, 0x6c, 0x75,
	0x65, 0x12, 0x23, 0x0a, 0x0c, 0x73, 0x74, 0x72, 0x69, 0x6e, 0x67, 0x5f, 0x76, 0x61, 0x6c, 0x75,
	0x65, 0x18, 0x04, 0x20, 0x01, 0x28, 0x09, 0x48, 0x00, 0x52, 0x0b, 0x73, 0x74, 0x72, 0x69, 0x6e,
	0x67, 0x56, 0x61, 0x6c, 0x75, 0x65, 0x12, 0x49, 0x0a, 0x12, 0x64, 0x69, 0x73, 0x74, 0x72, 0x69,
	0x62, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x18, 0x05, 0x20, 0x01,
	0x28, 0x0b, 0x32, 0x18, 0x2e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x61, 0x70, 0x69, 0x2e,
	0x44, 0x69, 0x73, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x48, 0x00, 0x52, 0x11,
	0x64, 0x69, 0x73, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x56, 0x61, 0x6c, 0x75,
	0x65, 0x42, 0x07, 0x0a, 0x05, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x80, 0x01, 0x0a, 0x0c, 0x54,
	0x69, 0x6d, 0x65, 0x49, 0x6e, 0x74, 0x65, 0x72, 0x76, 0x61, 0x6c, 0x12, 0x35, 0x0a, 0x08, 0x65,
	0x6e, 0x64, 0x5f, 0x74, 0x69, 0x6d, 0x65, 0x18, 0x02, 0x20, 0x01, 0x28, 0x0b, 0x32, 0x1a, 0x2e,
	0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2e,
	0x54, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x52, 0x07, 0x65, 0x6e, 0x64, 0x54, 0x69,
	0x6d, 0x65, 0x12, 0x39, 0x0a, 0x0a, 0x73, 0x74, 0x61, 0x72, 0x74, 0x5f, 0x74, 0x69, 0x6d, 0x65,
	0x18, 0x01, 0x20, 0x01, 0x28, 0x0b, 0x32, 0x1a, 0x2e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e,
	0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2e, 0x54, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61,
	0x6d, 0x70, 0x52, 0x09, 0x73, 0x74, 0x61, 0x72, 0x74, 0x54, 0x69, 0x6d, 0x65, 0x22, 0xf3, 0x07,
	0x0a, 0x0b, 0x41, 0x67, 0x67, 0x72, 0x65, 0x67, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x12, 0x44, 0x0a,
	0x10, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x6d, 0x65, 0x6e, 0x74, 0x5f, 0x70, 0x65, 0x72, 0x69, 0x6f,
	0x64, 0x18, 0x01, 0x20, 0x01, 0x28, 0x0b, 0x32, 0x19, 0x2e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65,
	0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2e, 0x44, 0x75, 0x72, 0x61, 0x74, 0x69,
	0x6f, 0x6e, 0x52, 0x0f, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x6d, 0x65, 0x6e, 0x74, 0x50, 0x65, 0x72,
	0x69, 0x6f, 0x64, 0x12, 0x57, 0x0a, 0x12, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x65, 0x72, 0x69, 0x65,
	0x73, 0x5f, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x65, 0x72, 0x18, 0x02, 0x20, 0x01, 0x28, 0x0e, 0x32,
	0x29, 0x2e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x6d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72,
	0x69, 0x6e, 0x67, 0x2e, 0x76, 0x33, 0x2e, 0x41, 0x67, 0x67, 0x72, 0x65, 0x67, 0x61, 0x74, 0x69,
	0x6f, 0x6e, 0x2e, 0x41, 0x6c, 0x69, 0x67, 0x6e, 0x65, 0x72, 0x52, 0x10, 0x70, 0x65, 0x72, 0x53,
	0x65, 0x72, 0x69, 0x65, 0x73, 0x41, 0x6c, 0x69, 0x67, 0x6e, 0x65, 0x72, 0x12, 0x5b, 0x0a, 0x14,
	0x63, 0x72, 0x6f, 0x73, 0x73, 0x5f, 0x73, 0x65, 0x72, 0x69, 0x65, 0x73, 0x5f, 0x72, 0x65, 0x64,
	0x75, 0x63, 0x65, 0x72, 0x18, 0x04, 0x20, 0x01, 0x28, 0x0e, 0x32, 0x29, 0x2e, 0x67, 0x6f, 0x6f,
	0x67, 0x6c, 0x65, 0x2e, 0x6d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72, 0x69, 0x6e, 0x67, 0x2e, 0x76,
	0x33, 0x2e, 0x41, 0x67, 0x67, 0x72, 0x65, 0x67, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x52, 0x65,
	0x64, 0x75, 0x63, 0x65, 0x72, 0x52, 0x12, 0x63, 0x72, 0x6f, 0x73, 0x73, 0x53, 0x65, 0x72, 0x69,
	0x65, 0x73, 0x52, 0x65, 0x64, 0x75, 0x63, 0x65, 0x72, 0x12, 0x26, 0x0a, 0x0f, 0x67, 0x72, 0x6f,
	0x75, 0x70, 0x5f, 0x62, 0x79, 0x5f, 0x66, 0x69, 0x65, 0x6c, 0x64, 0x73, 0x18, 0x05, 0x20, 0x03,
	0x28, 0x09, 0x52, 0x0d, 0x67, 0x72, 0x6f, 0x75, 0x70, 0x42, 0x79, 0x46, 0x69, 0x65, 0x6c, 0x64,
	0x73, 0x22, 0x8b, 0x03, 0x0a, 0x07, 0x41, 0x6c, 0x69, 0x67, 0x6e, 0x65, 0x72, 0x12, 0x0e, 0x0a,
	0x0a, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x4e, 0x4f, 0x4e, 0x45, 0x10, 0x00, 0x12, 0x0f, 0x0a,
	0x0b, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x44, 0x45, 0x4c, 0x54, 0x41, 0x10, 0x01, 0x12, 0x0e,
	0x0a, 0x0a, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x52, 0x41, 0x54, 0x45, 0x10, 0x02, 0x12, 0x15,
	0x0a, 0x11, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x49, 0x4e, 0x54, 0x45, 0x52, 0x50, 0x4f, 0x4c,
	0x41, 0x54, 0x45, 0x10, 0x03, 0x12, 0x14, 0x0a, 0x10, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x4e,
	0x45, 0x58, 0x54, 0x5f, 0x4f, 0x4c, 0x44, 0x45, 0x52, 0x10, 0x04, 0x12, 0x0d, 0x0a, 0x09, 0x41,
	0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x4d, 0x49, 0x4e, 0x10, 0x0a, 0x12, 0x0d, 0x0a, 0x09, 0x41, 0x4c,
	0x49, 0x47, 0x4e, 0x5f, 0x4d, 0x41, 0x58, 0x10, 0x0b, 0x12, 0x0e, 0x0a, 0x0a, 0x41, 0x4c, 0x49,
	0x47, 0x4e, 0x5f, 0x4d, 0x45, 0x41, 0x4e, 0x10, 0x0c, 0x12, 0x0f, 0x0a, 0x0b, 0x41, 0x4c, 0x49,
	0x47, 0x4e, 0x5f, 0x43, 0x4f, 0x55, 0x4e, 0x54, 0x10, 0x0d, 0x12, 0x0d, 0x0a, 0x09, 0x41, 0x4c,
	0x49, 0x47, 0x4e, 0x5f, 0x53, 0x55, 0x4d, 0x10, 0x0e, 0x12, 0x10, 0x0a, 0x0c, 0x41, 0x4c, 0x49,
	0x47, 0x4e, 0x5f, 0x53, 0x54, 0x44, 0x44, 0x45, 0x56, 0x10, 0x0f, 0x12, 0x14, 0x0a, 0x10, 0x41,
	0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x43, 0x4f, 0x55, 0x4e, 0x54, 0x5f, 0x54, 0x52, 0x55, 0x45, 0x10,
	0x10, 0x12, 0x15, 0x0a, 0x11, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x43, 0x4f, 0x55, 0x4e, 0x54,
	0x5f, 0x46, 0x41, 0x4c, 0x53, 0x45, 0x10, 0x18, 0x12, 0x17, 0x0a, 0x13, 0x41, 0x4c, 0x49, 0x47,
	0x4e, 0x5f, 0x46, 0x52, 0x41, 0x43, 0x54, 0x49, 0x4f, 0x4e, 0x5f, 0x54, 0x52, 0x55, 0x45, 0x10,
	0x11, 0x12, 0x17, 0x0a, 0x13, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45,
	0x4e, 0x54, 0x49, 0x4c, 0x45, 0x5f, 0x39, 0x39, 0x10, 0x12, 0x12, 0x17, 0x0a, 0x13, 0x41, 0x4c,
	0x49, 0x47, 0x4e, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45, 0x5f, 0x39,
	0x35, 0x10, 0x13, 0x12, 0x17, 0x0a, 0x13, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x50, 0x45, 0x52,
	0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45, 0x5f, 0x35, 0x30, 0x10, 0x14, 0x12, 0x17, 0x0a, 0x13,
	0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45,
	0x5f, 0x30, 0x35, 0x10, 0x15, 0x12, 0x18, 0x0a, 0x14, 0x41, 0x4c, 0x49, 0x47, 0x4e, 0x5f, 0x50,
	0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x5f, 0x43, 0x48, 0x41, 0x4e, 0x47, 0x45, 0x10, 0x17, 0x22,
	0xb1, 0x02, 0x0a, 0x07, 0x52, 0x65, 0x64, 0x75, 0x63, 0x65, 0x72, 0x12, 0x0f, 0x0a, 0x0b, 0x52,
	0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x4e, 0x4f, 0x4e, 0x45, 0x10, 0x00, 0x12, 0x0f, 0x0a, 0x0b,
	0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x4d, 0x45, 0x41, 0x4e, 0x10, 0x01, 0x12, 0x0e, 0x0a,
	0x0a, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x4d, 0x49, 0x4e, 0x10, 0x02, 0x12, 0x0e, 0x0a,
	0x0a, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x4d, 0x41, 0x58, 0x10, 0x03, 0x12, 0x0e, 0x0a,
	0x0a, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x53, 0x55, 0x4d, 0x10, 0x04, 0x12, 0x11, 0x0a,
	0x0d, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x53, 0x54, 0x44, 0x44, 0x45, 0x56, 0x10, 0x05,
	0x12, 0x10, 0x0a, 0x0c, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x43, 0x4f, 0x55, 0x4e, 0x54,
	0x10, 0x06, 0x12, 0x15, 0x0a, 0x11, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x43, 0x4f, 0x55,
	0x4e, 0x54, 0x5f, 0x54, 0x52, 0x55, 0x45, 0x10, 0x07, 0x12, 0x16, 0x0a, 0x12, 0x52, 0x45, 0x44,
	0x55, 0x43, 0x45, 0x5f, 0x43, 0x4f, 0x55, 0x4e, 0x54, 0x5f, 0x46, 0x41, 0x4c, 0x53, 0x45, 0x10,
	0x0f, 0x12, 0x18, 0x0a, 0x14, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x46, 0x52, 0x41, 0x43,
	0x54, 0x49, 0x4f, 0x4e, 0x5f, 0x54, 0x52, 0x55, 0x45, 0x10, 0x08, 0x12, 0x18, 0x0a, 0x14, 0x52,
	0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45,
	0x5f, 0x39, 0x39, 0x10, 0x09, 0x12, 0x18, 0x0a, 0x14, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f,
	0x50, 0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45, 0x5f, 0x39, 0x35, 0x10, 0x0a, 0x12,
	0x18, 0x0a, 0x14, 0x52, 0x45, 0x44, 0x55, 0x43, 0x45, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45, 0x4e,
	0x54, 0x49, 0x4c, 0x45, 0x5f, 0x35, 0x30, 0x10, 0x0b, 0x12, 0x18, 0x0a, 0x14, 0x52, 0x45, 0x44,
	0x55, 0x43, 0x45, 0x5f, 0x50, 0x45, 0x52, 0x43, 0x45, 0x4e, 0x54, 0x49, 0x4c, 0x45, 0x5f, 0x30,
	0x35, 0x10, 0x0c, 0x2a, 0x9e, 0x01, 0x0a, 0x0e, 0x43, 0x6f, 0x6d, 0x70, 0x61, 0x72, 0x69, 0x73,
	0x6f, 0x6e, 0x54, 0x79, 0x70, 0x65, 0x12, 0x1a, 0x0a, 0x16, 0x43, 0x4f, 0x4d, 0x50, 0x41, 0x52,
	0x49, 0x53, 0x4f, 0x4e, 0x5f, 0x55, 0x4e, 0x53, 0x50, 0x45, 0x43, 0x49, 0x46, 0x49, 0x45, 0x44,
	0x10, 0x00, 0x12, 0x11, 0x0a, 0x0d, 0x43, 0x4f, 0x4d, 0x50, 0x41, 0x52, 0x49, 0x53, 0x4f, 0x4e,
	0x5f, 0x47, 0x54, 0x10, 0x01, 0x12, 0x11, 0x0a, 0x0d, 0x43, 0x4f, 0x4d, 0x50, 0x41, 0x52, 0x49,
	0x53, 0x4f, 0x4e, 0x5f, 0x47, 0x45, 0x10, 0x02, 0x12, 0x11, 0x0a, 0x0d, 0x43, 0x4f, 0x4d, 0x50,
	0x41, 0x52, 0x49, 0x53, 0x4f, 0x4e, 0x5f, 0x4c, 0x54, 0x10, 0x03, 0x12, 0x11, 0x0a, 0x0d, 0x43,
	0x4f, 0x4d, 0x50, 0x41, 0x52, 0x49, 0x53, 0x4f, 0x4e, 0x5f, 0x4c, 0x45, 0x10, 0x04, 0x12, 0x11,
	0x0a, 0x0d, 0x43, 0x4f, 0x4d, 0x50, 0x41, 0x52, 0x49, 0x53, 0x4f, 0x4e, 0x5f, 0x45, 0x51, 0x10,
	0x05, 0x12, 0x11, 0x0a, 0x0d, 0x43, 0x4f, 0x4d, 0x50, 0x41, 0x52, 0x49, 0x53, 0x4f, 0x4e, 0x5f,
	0x4e, 0x45, 0x10, 0x06, 0x2a, 0x61, 0x0a, 0x0b, 0x53, 0x65, 0x72, 0x76, 0x69, 0x63, 0x65, 0x54,
	0x69, 0x65, 0x72, 0x12, 0x1c, 0x0a, 0x18, 0x53, 0x45, 0x52, 0x56, 0x49, 0x43, 0x45, 0x5f, 0x54,
	0x49, 0x45, 0x52, 0x5f, 0x55, 0x4e, 0x53, 0x50, 0x45, 0x43, 0x49, 0x46, 0x49, 0x45, 0x44, 0x10,
	0x00, 0x12, 0x16, 0x0a, 0x12, 0x53, 0x45, 0x52, 0x56, 0x49, 0x43, 0x45, 0x5f, 0x54, 0x49, 0x45,
	0x52, 0x5f, 0x42, 0x41, 0x53, 0x49, 0x43, 0x10, 0x01, 0x12, 0x18, 0x0a, 0x14, 0x53, 0x45, 0x52,
	0x56, 0x49, 0x43, 0x45, 0x5f, 0x54, 0x49, 0x45, 0x52, 0x5f, 0x50, 0x52, 0x45, 0x4d, 0x49, 0x55,
	0x4d, 0x10, 0x02, 0x1a, 0x02, 0x18, 0x01, 0x42, 0xc3, 0x01, 0x0a, 0x18, 0x63, 0x6f, 0x6d, 0x2e,
	0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x6d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72, 0x69, 0x6e,
	0x67, 0x2e, 0x76, 0x33, 0x42, 0x0b, 0x43, 0x6f, 0x6d, 0x6d, 0x6f, 0x6e, 0x50, 0x72, 0x6f, 0x74,
	0x6f, 0x50, 0x01, 0x5a, 0x3e, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x67, 0x6f, 0x6c, 0x61,
	0x6e, 0x67, 0x2e, 0x6f, 0x72, 0x67, 0x2f, 0x67, 0x65, 0x6e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x2f,
	0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x61, 0x70, 0x69, 0x73, 0x2f, 0x6d, 0x6f, 0x6e, 0x69, 0x74,
	0x6f, 0x72, 0x69, 0x6e, 0x67, 0x2f, 0x76, 0x33, 0x3b, 0x6d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72,
	0x69, 0x6e, 0x67, 0xaa, 0x02, 0x1a, 0x47, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e, 0x43, 0x6c, 0x6f,
	0x75, 0x64, 0x2e, 0x4d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72, 0x69, 0x6e, 0x67, 0x2e, 0x56, 0x33,
	0xca, 0x02, 0x1a, 0x47, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x5c, 0x43, 0x6c, 0x6f, 0x75, 0x64, 0x5c,
	0x4d, 0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72, 0x69, 0x6e, 0x67, 0x5c, 0x56, 0x33, 0xea, 0x02, 0x1d,
	0x47, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x3a, 0x3a, 0x43, 0x6c, 0x6f, 0x75, 0x64, 0x3a, 0x3a, 0x4d,
	0x6f, 0x6e, 0x69, 0x74, 0x6f, 0x72, 0x69, 0x6e, 0x67, 0x3a, 0x3a, 0x56, 0x33, 0x62, 0x06, 0x70,
	0x72, 0x6f, 0x74, 0x6f, 0x33,
}

var (
	file_google_monitoring_v3_common_proto_rawDescOnce sync.Once
	file_google_monitoring_v3_common_proto_rawDescData = file_google_monitoring_v3_common_proto_rawDesc
)

func file_google_monitoring_v3_common_proto_rawDescGZIP() []byte {
	file_google_monitoring_v3_common_proto_rawDescOnce.Do(func() {
		file_google_monitoring_v3_common_proto_rawDescData = protoimpl.X.CompressGZIP(file_google_monitoring_v3_common_proto_rawDescData)
	})
	return file_google_monitoring_v3_common_proto_rawDescData
}

var file_google_monitoring_v3_common_proto_enumTypes = make([]protoimpl.EnumInfo, 4)
var file_google_monitoring_v3_common_proto_msgTypes = make([]protoimpl.MessageInfo, 3)
var file_google_monitoring_v3_common_proto_goTypes = []interface{}{
	(ComparisonType)(0),               // 0: google.monitoring.v3.ComparisonType
	(ServiceTier)(0),                  // 1: google.monitoring.v3.ServiceTier
	(Aggregation_Aligner)(0),          // 2: google.monitoring.v3.Aggregation.Aligner
	(Aggregation_Reducer)(0),          // 3: google.monitoring.v3.Aggregation.Reducer
	(*TypedValue)(nil),                // 4: google.monitoring.v3.TypedValue
	(*TimeInterval)(nil),              // 5: google.monitoring.v3.TimeInterval
	(*Aggregation)(nil),               // 6: google.monitoring.v3.Aggregation
	(*distribution.Distribution)(nil), // 7: google.api.Distribution
	(*timestamp.Timestamp)(nil),       // 8: google.protobuf.Timestamp
	(*duration.Duration)(nil),         // 9: google.protobuf.Duration
}
var file_google_monitoring_v3_common_proto_depIdxs = []int32{
	7, // 0: google.monitoring.v3.TypedValue.distribution_value:type_name -> google.api.Distribution
	8, // 1: google.monitoring.v3.TimeInterval.end_time:type_name -> google.protobuf.Timestamp
	8, // 2: google.monitoring.v3.TimeInterval.start_time:type_name -> google.protobuf.Timestamp
	9, // 3: google.monitoring.v3.Aggregation.alignment_period:type_name -> google.protobuf.Duration
	2, // 4: google.monitoring.v3.Aggregation.per_series_aligner:type_name -> google.monitoring.v3.Aggregation.Aligner
	3, // 5: google.monitoring.v3.Aggregation.cross_series_reducer:type_name -> google.monitoring.v3.Aggregation.Reducer
	6, // [6:6] is the sub-list for method output_type
	6, // [6:6] is the sub-list for method input_type
	6, // [6:6] is the sub-list for extension type_name
	6, // [6:6] is the sub-list for extension extendee
	0, // [0:6] is the sub-list for field type_name
}

func init() { file_google_monitoring_v3_common_proto_init() }
func file_google_monitoring_v3_common_proto_init() {
	if File_google_monitoring_v3_common_proto != nil {
		return
	}
	if !protoimpl.UnsafeEnabled {
		file_google_monitoring_v3_common_proto_msgTypes[0].Exporter = func(v interface{}, i int) interface{} {
			switch v := v.(*TypedValue); i {
			case 0:
				return &v.state
			case 1:
				return &v.sizeCache
			case 2:
				return &v.unknownFields
			default:
				return nil
			}
		}
		file_google_monitoring_v3_common_proto_msgTypes[1].Exporter = func(v interface{}, i int) interface{} {
			switch v := v.(*TimeInterval); i {
			case 0:
				return &v.state
			case 1:
				return &v.sizeCache
			case 2:
				return &v.unknownFields
			default:
				return nil
			}
		}
		file_google_monitoring_v3_common_proto_msgTypes[2].Exporter = func(v interface{}, i int) interface{} {
			switch v := v.(*Aggregation); i {
			case 0:
				return &v.state
			case 1:
				return &v.sizeCache
			case 2:
				return &v.unknownFields
			default:
				return nil
			}
		}
	}
	file_google_monitoring_v3_common_proto_msgTypes[0].OneofWrappers = []interface{}{
		(*TypedValue_BoolValue)(nil),
		(*TypedValue_Int64Value)(nil),
		(*TypedValue_DoubleValue)(nil),
		(*TypedValue_StringValue)(nil),
		(*TypedValue_DistributionValue)(nil),
	}
	type x struct{}
	out := protoimpl.TypeBuilder{
		File: protoimpl.DescBuilder{
			GoPackagePath: reflect.TypeOf(x{}).PkgPath(),
			RawDescriptor: file_google_monitoring_v3_common_proto_rawDesc,
			NumEnums:      4,
			NumMessages:   3,
			NumExtensions: 0,
			NumServices:   0,
		},
		GoTypes:           file_google_monitoring_v3_common_proto_goTypes,
		DependencyIndexes: file_google_monitoring_v3_common_proto_depIdxs,
		EnumInfos:         file_google_monitoring_v3_common_proto_enumTypes,
		MessageInfos:      file_google_monitoring_v3_common_proto_msgTypes,
	}.Build()
	File_google_monitoring_v3_common_proto = out.File
	file_google_monitoring_v3_common_proto_rawDesc = nil
	file_google_monitoring_v3_common_proto_goTypes = nil
	file_google_monitoring_v3_common_proto_depIdxs = nil
}