blob: 2bd21b22ce95b75ed7217f26aeeaa7865a88fc1c [file] [log] [blame]
TI HD3SS3220 TypeC DRP Port Controller.
Required properties:
- compatible: Must be "ti,hd3ss3220".
- reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
- interrupts: An interrupt specifier.
Required sub-node:
- connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
bindings of the connector node are specified in:
Documentation/devicetree/bindings/connector/usb-connector.yaml
Example:
hd3ss3220@47 {
compatible = "ti,hd3ss3220";
reg = <0x47>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
hd3ss3220_ep: endpoint {
remote-endpoint = <&usb3_role_switch>;
};
};
};
};
};