blob: 7f0b7aba1498839a015c2f2ae6474e49cbeb0380 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/kernel/entry-common.S
*
* Copyright (C) 2000 Russell King
*/
#include <asm/assembler.h>
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <asm/unwind.h>
#include <asm/memory.h>
#ifdef CONFIG_AEABI
#include <asm/unistd-oabi.h>
#endif
.equ NR_syscalls, __NR_syscalls
#ifdef CONFIG_NEED_RET_TO_USER
#include <mach/entry-macro.S>
#else
.macro arch_ret_to_user, tmp1, tmp2
.endm
#endif
#include "entry-header.S"
saved_psr .req r8
#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
saved_pc .req r9
#define TRACE(x...) x
#else
saved_pc .req lr
#define TRACE(x...)
#endif
.section .entry.text,"ax",%progbits
.align 5
#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING) || \
IS_ENABLED(CONFIG_DEBUG_RSEQ))
/*
* This is the fast syscall return path. We do as little as possible here,
* such as avoiding writing r0 to the stack. We only use this path if we
* have tracing, context tracking and rseq debug disabled - the overheads
* from those features make this path too inefficient.
*/
ret_fast_syscall:
__ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq_notrace @ disable interrupts
ldr r2, [tsk, #TI_ADDR_LIMIT]
ldr r1, =TASK_SIZE
cmp r2, r1
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
movs r1, r1, lsl #16
bne fast_work_pending
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
ENDPROC(ret_fast_syscall)
/* Ok, we need to do extra processing, enter the slow path. */
fast_work_pending:
str r0, [sp, #S_R0+S_OFF]! @ returned r0
/* fall through to work_pending */
#else
/*
* The "replacement" ret_fast_syscall for when tracing, context tracking,
* or rseq debug is enabled. As we will need to call out to some C functions,
* we save r0 first to avoid needing to save registers around each C function
* call.
*/
ret_fast_syscall:
__ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
#if IS_ENABLED(CONFIG_DEBUG_RSEQ)
/* do_rseq_syscall needs interrupts enabled. */
mov r0, sp @ 'regs'
bl do_rseq_syscall
#endif
disable_irq_notrace @ disable interrupts
ldr r2, [tsk, #TI_ADDR_LIMIT]
ldr r1, =TASK_SIZE
cmp r2, r1
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
movs r1, r1, lsl #16
beq no_work_pending
UNWIND(.fnend )
ENDPROC(ret_fast_syscall)
/* Slower path - fall through to work_pending */
#endif
tst r1, #_TIF_SYSCALL_WORK
bne __sys_trace_return_nosave
slow_work_pending:
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
bl do_work_pending
cmp r0, #0
beq no_work_pending
movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
ldmia sp, {r0 - r6} @ have to reload r0 - r6
b local_restart @ ... and off we go
ENDPROC(ret_fast_syscall)
/*
* "slow" syscall return path. "why" tells us if this was a real syscall.
* IRQs may be enabled here, so always disable them. Note that we use the
* "notrace" version to avoid calling into the tracing code unnecessarily.
* do_work_pending() will update this state if necessary.
*/
ENTRY(ret_to_user)
ret_slow_syscall:
#if IS_ENABLED(CONFIG_DEBUG_RSEQ)
/* do_rseq_syscall needs interrupts enabled. */
enable_irq_notrace @ enable interrupts
mov r0, sp @ 'regs'
bl do_rseq_syscall
#endif
disable_irq_notrace @ disable interrupts
ENTRY(ret_to_user_from_irq)
ldr r2, [tsk, #TI_ADDR_LIMIT]
ldr r1, =TASK_SIZE
cmp r2, r1
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS]
movs r1, r1, lsl #16
bne slow_work_pending
no_work_pending:
asm_trace_hardirqs_on save = 0
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
ct_user_enter save = 0
restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
*/
ENTRY(ret_from_fork)
bl schedule_tail
cmp r5, #0
movne r0, r4
badrne lr, 1f
retne r5
1: get_thread_info tsk
b ret_slow_syscall
ENDPROC(ret_from_fork)
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
*/
.align 5
ENTRY(vector_swi)
#ifdef CONFIG_CPU_V7M
v7m_exception_entry
#else
sub sp, sp, #PT_REGS_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
ARM( add r8, sp, #S_PC )
ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
THUMB( mov r8, sp )
THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
mrs saved_psr, spsr @ called from non-FIQ mode, so ok.
TRACE( mov saved_pc, lr )
str saved_pc, [sp, #S_PC] @ Save calling PC
str saved_psr, [sp, #S_PSR] @ Save CPSR
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
#endif
zero_fp
alignment_trap r10, ip, __cr_alignment
asm_trace_hardirqs_on save=0
enable_irq_notrace
ct_user_exit save=0
/*
* Get the system call number.
*/
#if defined(CONFIG_OABI_COMPAT)
/*
* If we have CONFIG_OABI_COMPAT then we need to look at the swi
* value to determine if it is an EABI or an old ABI call.
*/
#ifdef CONFIG_ARM_THUMB
tst saved_psr, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
USER( ldreq r10, [saved_pc, #-4] ) @ get SWI instruction
#else
USER( ldr r10, [saved_pc, #-4] ) @ get SWI instruction
#endif
ARM_BE8(rev r10, r10) @ little endian instruction
#elif defined(CONFIG_AEABI)
/*
* Pure EABI user space always put syscall number into scno (r7).
*/
#elif defined(CONFIG_ARM_THUMB)
/* Legacy ABI only, possibly thumb mode. */
tst saved_psr, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
USER( ldreq scno, [saved_pc, #-4] )
#else
/* Legacy ABI only. */
USER( ldr scno, [saved_pc, #-4] ) @ get SWI instruction
#endif
/* saved_psr and saved_pc are now dead */
uaccess_disable tbl
adr tbl, sys_call_table @ load syscall table pointer
#if defined(CONFIG_OABI_COMPAT)
/*
* If the swi argument is zero, this is an EABI call and we do nothing.
*
* If this is an old ABI call, get the syscall number into scno and
* get the old ABI syscall table address.
*/
bics r10, r10, #0xff000000
eorne scno, r10, #__NR_OABI_SYSCALL_BASE
ldrne tbl, =sys_oabi_call_table
#elif !defined(CONFIG_AEABI)
bic scno, scno, #0xff000000 @ mask off SWI op-code
eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
#endif
get_thread_info tsk
/*
* Reload the registers that may have been corrupted on entry to
* the syscall assembly (by tracing or context tracking.)
*/
TRACE( ldmia sp, {r0 - r3} )
local_restart:
ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
stmdb sp!, {r4, r5} @ push fifth and sixth args
tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
bne __sys_trace
invoke_syscall tbl, scno, r10, __ret_fast_syscall
add r1, sp, #S_OFF
2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
mov why, #0 @ no longer a real syscall
b sys_ni_syscall @ not private func
#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
/*
* We failed to handle a fault trying to access the page
* containing the swi instruction, but we're not really in a
* position to return -EFAULT. Instead, return back to the
* instruction and re-enter the user fault handling path trying
* to page it in. This will likely result in sending SEGV to the
* current task.
*/
9001:
sub lr, saved_pc, #4
str lr, [sp, #S_PC]
get_thread_info tsk
b ret_fast_syscall
#endif
ENDPROC(vector_swi)
/*
* This is the really slow path. We're going to be doing
* context switches, and waiting for our parent to respond.
*/
__sys_trace:
mov r1, scno
add r0, sp, #S_OFF
bl syscall_trace_enter
mov scno, r0
invoke_syscall tbl, scno, r10, __sys_trace_return, reload=1
cmp scno, #-1 @ skip the syscall?
bne 2b
add sp, sp, #S_OFF @ restore stack
__sys_trace_return_nosave:
enable_irq_notrace
mov r0, sp
bl syscall_trace_exit
b ret_slow_syscall
__sys_trace_return:
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
mov r0, sp
bl syscall_trace_exit
b ret_slow_syscall
.align 5
#ifdef CONFIG_ALIGNMENT_TRAP
.type __cr_alignment, #object
__cr_alignment:
.word cr_alignment
#endif
.ltorg
.macro syscall_table_start, sym
.equ __sys_nr, 0
.type \sym, #object
ENTRY(\sym)
.endm
.macro syscall, nr, func
.ifgt __sys_nr - \nr
.error "Duplicated/unorded system call entry"
.endif
.rept \nr - __sys_nr
.long sys_ni_syscall
.endr
.long \func
.equ __sys_nr, \nr + 1
.endm
.macro syscall_table_end, sym
.ifgt __sys_nr - __NR_syscalls
.error "System call table too big"
.endif
.rept __NR_syscalls - __sys_nr
.long sys_ni_syscall
.endr
.size \sym, . - \sym
.endm
#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
#define __SYSCALL(nr, func) syscall nr, func
/*
* This is the syscall table declaration for native ABI syscalls.
* With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
*/
syscall_table_start sys_call_table
#ifdef CONFIG_AEABI
#include <calls-eabi.S>
#else
#include <calls-oabi.S>
#endif
syscall_table_end sys_call_table
/*============================================================================
* Special system call wrappers
*/
@ r0 = syscall number
@ r8 = syscall table
sys_syscall:
bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
cmpne scno, #NR_syscalls @ check range
#ifdef CONFIG_CPU_SPECTRE
movhs scno, #0
csdb
#endif
stmialo sp, {r5, r6} @ shuffle args
movlo r0, r1
movlo r1, r2
movlo r2, r3
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
ENDPROC(sys_syscall)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
ENDPROC(sys_statfs64_wrapper)
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
ENDPROC(sys_fstatfs64_wrapper)
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
* offset, we return EINVAL.
*/
sys_mmap2:
str r5, [sp, #4]
b sys_mmap_pgoff
ENDPROC(sys_mmap2)
#ifdef CONFIG_OABI_COMPAT
/*
* These are syscalls with argument register differences
*/
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
ENDPROC(sys_oabi_pread64)
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
ENDPROC(sys_oabi_pwrite64)
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
ENDPROC(sys_oabi_truncate64)
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
ENDPROC(sys_oabi_ftruncate64)
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
ENDPROC(sys_oabi_readahead)
/*
* Let's declare a second syscall table for old ABI binaries
* using the compatibility syscall entries.
*/
syscall_table_start sys_oabi_call_table
#undef __SYSCALL_WITH_COMPAT
#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
#include <calls-oabi.S>
syscall_table_end sys_oabi_call_table
#endif