| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| ret=0 |
| sin="" |
| sout="" |
| cin="" |
| cinsent="" |
| cout="" |
| ksft_skip=4 |
| timeout=30 |
| mptcp_connect="" |
| capture=0 |
| do_all_tests=1 |
| |
| TEST_COUNT=0 |
| |
| # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || |
| # (ip6 && (ip6[74] & 0xf0) == 0x30)'" |
| CBPF_MPTCP_SUBOPTION_ADD_ADDR="14, |
| 48 0 0 0, |
| 84 0 0 240, |
| 21 0 3 64, |
| 48 0 0 54, |
| 84 0 0 240, |
| 21 6 7 48, |
| 48 0 0 0, |
| 84 0 0 240, |
| 21 0 4 96, |
| 48 0 0 74, |
| 84 0 0 240, |
| 21 0 1 48, |
| 6 0 0 65535, |
| 6 0 0 0" |
| |
| init() |
| { |
| capout=$(mktemp) |
| |
| rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) |
| |
| ns1="ns1-$rndh" |
| ns2="ns2-$rndh" |
| |
| for netns in "$ns1" "$ns2";do |
| ip netns add $netns || exit $ksft_skip |
| ip -net $netns link set lo up |
| ip netns exec $netns sysctl -q net.mptcp.enabled=1 |
| ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0 |
| ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0 |
| done |
| |
| # ns1 ns2 |
| # ns1eth1 ns2eth1 |
| # ns1eth2 ns2eth2 |
| # ns1eth3 ns2eth3 |
| # ns1eth4 ns2eth4 |
| |
| for i in `seq 1 4`; do |
| ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2" |
| ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i |
| ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad |
| ip -net "$ns1" link set ns1eth$i up |
| |
| ip -net "$ns2" addr add 10.0.$i.2/24 dev ns2eth$i |
| ip -net "$ns2" addr add dead:beef:$i::2/64 dev ns2eth$i nodad |
| ip -net "$ns2" link set ns2eth$i up |
| |
| # let $ns2 reach any $ns1 address from any interface |
| ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i |
| done |
| } |
| |
| cleanup_partial() |
| { |
| rm -f "$capout" |
| |
| for netns in "$ns1" "$ns2"; do |
| ip netns del $netns |
| done |
| } |
| |
| cleanup() |
| { |
| rm -f "$cin" "$cout" |
| rm -f "$sin" "$sout" "$cinsent" |
| cleanup_partial |
| } |
| |
| reset() |
| { |
| cleanup_partial |
| init |
| } |
| |
| reset_with_cookies() |
| { |
| reset |
| |
| for netns in "$ns1" "$ns2";do |
| ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2 |
| done |
| } |
| |
| reset_with_add_addr_timeout() |
| { |
| local ip="${1:-4}" |
| local tables |
| |
| tables="iptables" |
| if [ $ip -eq 6 ]; then |
| tables="ip6tables" |
| fi |
| |
| reset |
| |
| ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 |
| ip netns exec $ns2 $tables -A OUTPUT -p tcp \ |
| -m tcp --tcp-option 30 \ |
| -m bpf --bytecode \ |
| "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \ |
| -j DROP |
| } |
| |
| ip -Version > /dev/null 2>&1 |
| if [ $? -ne 0 ];then |
| echo "SKIP: Could not run test without ip tool" |
| exit $ksft_skip |
| fi |
| |
| iptables -V > /dev/null 2>&1 |
| if [ $? -ne 0 ];then |
| echo "SKIP: Could not run all tests without iptables tool" |
| exit $ksft_skip |
| fi |
| |
| ip6tables -V > /dev/null 2>&1 |
| if [ $? -ne 0 ];then |
| echo "SKIP: Could not run all tests without ip6tables tool" |
| exit $ksft_skip |
| fi |
| |
| print_file_err() |
| { |
| ls -l "$1" 1>&2 |
| echo "Trailing bytes are: " |
| tail -c 27 "$1" |
| } |
| |
| check_transfer() |
| { |
| in=$1 |
| out=$2 |
| what=$3 |
| |
| cmp "$in" "$out" > /dev/null 2>&1 |
| if [ $? -ne 0 ] ;then |
| echo "[ FAIL ] $what does not match (in, out):" |
| print_file_err "$in" |
| print_file_err "$out" |
| ret=1 |
| |
| return 1 |
| fi |
| |
| return 0 |
| } |
| |
| do_ping() |
| { |
| listener_ns="$1" |
| connector_ns="$2" |
| connect_addr="$3" |
| |
| ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null |
| if [ $? -ne 0 ] ; then |
| echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2 |
| ret=1 |
| fi |
| } |
| |
| link_failure() |
| { |
| ns="$1" |
| |
| l=$((RANDOM%4)) |
| l=$((l+1)) |
| |
| veth="ns1eth$l" |
| ip -net "$ns" link set "$veth" down |
| } |
| |
| # $1: IP address |
| is_v6() |
| { |
| [ -z "${1##*:*}" ] |
| } |
| |
| do_transfer() |
| { |
| listener_ns="$1" |
| connector_ns="$2" |
| cl_proto="$3" |
| srv_proto="$4" |
| connect_addr="$5" |
| test_link_fail="$6" |
| addr_nr_ns1="$7" |
| addr_nr_ns2="$8" |
| speed="$9" |
| bkup="${10}" |
| |
| port=$((10000+$TEST_COUNT)) |
| TEST_COUNT=$((TEST_COUNT+1)) |
| |
| :> "$cout" |
| :> "$sout" |
| :> "$capout" |
| |
| if [ $capture -eq 1 ]; then |
| if [ -z $SUDO_USER ] ; then |
| capuser="" |
| else |
| capuser="-Z $SUDO_USER" |
| fi |
| |
| capfile=$(printf "mp_join-%02u-%s.pcap" "$TEST_COUNT" "${listener_ns}") |
| |
| echo "Capturing traffic for test $TEST_COUNT into $capfile" |
| ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 & |
| cappid=$! |
| |
| sleep 1 |
| fi |
| |
| if [ $speed = "fast" ]; then |
| mptcp_connect="./mptcp_connect -j" |
| else |
| mptcp_connect="./mptcp_connect -r" |
| fi |
| |
| local local_addr |
| if is_v6 "${connect_addr}"; then |
| local_addr="::" |
| else |
| local_addr="0.0.0.0" |
| fi |
| |
| ip netns exec ${listener_ns} $mptcp_connect -t $timeout -l -p $port \ |
| -s ${srv_proto} ${local_addr} < "$sin" > "$sout" & |
| spid=$! |
| |
| sleep 1 |
| |
| if [ "$test_link_fail" -eq 0 ];then |
| ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" & |
| else |
| ( cat "$cin" ; sleep 2; link_failure $listener_ns ; cat "$cin" ) | tee "$cinsent" | \ |
| ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr > "$cout" & |
| fi |
| cpid=$! |
| |
| if [ $addr_nr_ns1 -gt 0 ]; then |
| let add_nr_ns1=addr_nr_ns1 |
| counter=2 |
| sleep 1 |
| while [ $add_nr_ns1 -gt 0 ]; do |
| local addr |
| if is_v6 "${connect_addr}"; then |
| addr="dead:beef:$counter::1" |
| else |
| addr="10.0.$counter.1" |
| fi |
| ip netns exec $ns1 ./pm_nl_ctl add $addr flags signal |
| let counter+=1 |
| let add_nr_ns1-=1 |
| done |
| sleep 1 |
| elif [ $addr_nr_ns1 -lt 0 ]; then |
| let rm_nr_ns1=-addr_nr_ns1 |
| if [ $rm_nr_ns1 -lt 8 ]; then |
| counter=1 |
| sleep 1 |
| |
| while [ $counter -le $rm_nr_ns1 ] |
| do |
| ip netns exec ${listener_ns} ./pm_nl_ctl del $counter |
| sleep 1 |
| let counter+=1 |
| done |
| else |
| sleep 1 |
| ip netns exec ${listener_ns} ./pm_nl_ctl flush |
| fi |
| fi |
| |
| if [ $addr_nr_ns2 -gt 0 ]; then |
| let add_nr_ns2=addr_nr_ns2 |
| counter=3 |
| sleep 1 |
| while [ $add_nr_ns2 -gt 0 ]; do |
| local addr |
| if is_v6 "${connect_addr}"; then |
| addr="dead:beef:$counter::2" |
| else |
| addr="10.0.$counter.2" |
| fi |
| ip netns exec $ns2 ./pm_nl_ctl add $addr flags subflow |
| let counter+=1 |
| let add_nr_ns2-=1 |
| done |
| sleep 1 |
| elif [ $addr_nr_ns2 -lt 0 ]; then |
| let rm_nr_ns2=-addr_nr_ns2 |
| if [ $rm_nr_ns2 -lt 8 ]; then |
| counter=1 |
| sleep 1 |
| |
| while [ $counter -le $rm_nr_ns2 ] |
| do |
| ip netns exec ${connector_ns} ./pm_nl_ctl del $counter |
| sleep 1 |
| let counter+=1 |
| done |
| else |
| sleep 1 |
| ip netns exec ${connector_ns} ./pm_nl_ctl flush |
| fi |
| fi |
| |
| if [ ! -z $bkup ]; then |
| sleep 1 |
| for netns in "$ns1" "$ns2"; do |
| dump=(`ip netns exec $netns ./pm_nl_ctl dump`) |
| if [ ${#dump[@]} -gt 0 ]; then |
| addr=${dump[${#dump[@]} - 1]} |
| backup="ip netns exec $netns ./pm_nl_ctl set $addr flags $bkup" |
| $backup |
| fi |
| done |
| fi |
| |
| wait $cpid |
| retc=$? |
| wait $spid |
| rets=$? |
| |
| if [ $capture -eq 1 ]; then |
| sleep 1 |
| kill $cappid |
| fi |
| |
| if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then |
| echo " client exit code $retc, server $rets" 1>&2 |
| echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2 |
| ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port" |
| echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2 |
| ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port" |
| |
| cat "$capout" |
| ret=1 |
| return 1 |
| fi |
| |
| check_transfer $sin $cout "file received by client" |
| retc=$? |
| if [ "$test_link_fail" -eq 0 ];then |
| check_transfer $cin $sout "file received by server" |
| else |
| check_transfer $cinsent $sout "file received by server" |
| fi |
| rets=$? |
| |
| if [ $retc -eq 0 ] && [ $rets -eq 0 ];then |
| cat "$capout" |
| return 0 |
| fi |
| |
| cat "$capout" |
| return 1 |
| } |
| |
| make_file() |
| { |
| name=$1 |
| who=$2 |
| size=$3 |
| |
| dd if=/dev/urandom of="$name" bs=1024 count=$size 2> /dev/null |
| echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name" |
| |
| echo "Created $name (size $size KB) containing data sent by $who" |
| } |
| |
| run_tests() |
| { |
| listener_ns="$1" |
| connector_ns="$2" |
| connect_addr="$3" |
| test_linkfail="${4:-0}" |
| addr_nr_ns1="${5:-0}" |
| addr_nr_ns2="${6:-0}" |
| speed="${7:-fast}" |
| bkup="${8:-""}" |
| lret=0 |
| oldin="" |
| |
| if [ "$test_linkfail" -eq 1 ];then |
| size=$((RANDOM%1024)) |
| size=$((size+1)) |
| size=$((size*128)) |
| |
| oldin=$(mktemp) |
| cp "$cin" "$oldin" |
| make_file "$cin" "client" $size |
| fi |
| |
| do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \ |
| ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${bkup} |
| lret=$? |
| |
| if [ "$test_linkfail" -eq 1 ];then |
| cp "$oldin" "$cin" |
| rm -f "$oldin" |
| fi |
| |
| if [ $lret -ne 0 ]; then |
| ret=$lret |
| return |
| fi |
| } |
| |
| chk_join_nr() |
| { |
| local msg="$1" |
| local syn_nr=$2 |
| local syn_ack_nr=$3 |
| local ack_nr=$4 |
| local count |
| local dump_stats |
| |
| printf "%02u %-36s %s" "$TEST_COUNT" "$msg" "syn" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$syn_nr" ]; then |
| echo "[fail] got $count JOIN[s] syn expected $syn_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - synack" |
| count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$syn_ack_nr" ]; then |
| echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - ack" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$ack_nr" ]; then |
| echo "[fail] got $count JOIN[s] ack expected $ack_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| if [ "${dump_stats}" = 1 ]; then |
| echo Server ns stats |
| ip netns exec $ns1 nstat -as | grep MPTcp |
| echo Client ns stats |
| ip netns exec $ns2 nstat -as | grep MPTcp |
| fi |
| } |
| |
| chk_add_nr() |
| { |
| local add_nr=$1 |
| local echo_nr=$2 |
| local port_nr=${3:-0} |
| local syn_nr=${4:-$port_nr} |
| local syn_ack_nr=${5:-$port_nr} |
| local ack_nr=${6:-$port_nr} |
| local mis_syn_nr=${7:-0} |
| local mis_ack_nr=${8:-0} |
| local count |
| local dump_stats |
| |
| printf "%-39s %s" " " "add" |
| count=`ip netns exec $ns2 nstat -as | grep MPTcpExtAddAddr | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$add_nr" ]; then |
| echo "[fail] got $count ADD_ADDR[s] expected $add_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - echo " |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtEchoAdd | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$echo_nr" ]; then |
| echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| if [ $port_nr -gt 0 ]; then |
| echo -n " - pt " |
| count=`ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$port_nr" ]; then |
| echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| |
| printf "%-39s %s" " " "syn" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx | |
| awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$syn_nr" ]; then |
| echo "[fail] got $count JOIN[s] syn with a different \ |
| port-number expected $syn_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - synack" |
| count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx | |
| awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$syn_ack_nr" ]; then |
| echo "[fail] got $count JOIN[s] synack with a different \ |
| port-number expected $syn_ack_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - ack" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx | |
| awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$ack_nr" ]; then |
| echo "[fail] got $count JOIN[s] ack with a different \ |
| port-number expected $ack_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| |
| printf "%-39s %s" " " "syn" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx | |
| awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$mis_syn_nr" ]; then |
| echo "[fail] got $count JOIN[s] syn with a mismatched \ |
| port-number expected $mis_syn_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - ack " |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx | |
| awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$mis_ack_nr" ]; then |
| echo "[fail] got $count JOIN[s] ack with a mismatched \ |
| port-number expected $mis_ack_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| else |
| echo "" |
| fi |
| |
| if [ "${dump_stats}" = 1 ]; then |
| echo Server ns stats |
| ip netns exec $ns1 nstat -as | grep MPTcp |
| echo Client ns stats |
| ip netns exec $ns2 nstat -as | grep MPTcp |
| fi |
| } |
| |
| chk_rm_nr() |
| { |
| local rm_addr_nr=$1 |
| local rm_subflow_nr=$2 |
| local count |
| local dump_stats |
| |
| printf "%-39s %s" " " "rm " |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtRmAddr | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$rm_addr_nr" ]; then |
| echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - sf " |
| count=`ip netns exec $ns2 nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$rm_subflow_nr" ]; then |
| echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| |
| if [ "${dump_stats}" = 1 ]; then |
| echo Server ns stats |
| ip netns exec $ns1 nstat -as | grep MPTcp |
| echo Client ns stats |
| ip netns exec $ns2 nstat -as | grep MPTcp |
| fi |
| } |
| |
| chk_prio_nr() |
| { |
| local mp_prio_nr_tx=$1 |
| local mp_prio_nr_rx=$2 |
| local count |
| local dump_stats |
| |
| printf "%-39s %s" " " "ptx" |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$mp_prio_nr_tx" ]; then |
| echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx" |
| ret=1 |
| dump_stats=1 |
| else |
| echo -n "[ ok ]" |
| fi |
| |
| echo -n " - prx " |
| count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}'` |
| [ -z "$count" ] && count=0 |
| if [ "$count" != "$mp_prio_nr_rx" ]; then |
| echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx" |
| ret=1 |
| dump_stats=1 |
| else |
| echo "[ ok ]" |
| fi |
| |
| if [ "${dump_stats}" = 1 ]; then |
| echo Server ns stats |
| ip netns exec $ns1 nstat -as | grep MPTcp |
| echo Client ns stats |
| ip netns exec $ns2 nstat -as | grep MPTcp |
| fi |
| } |
| |
| subflows_tests() |
| { |
| reset |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "no JOIN" "0" "0" "0" |
| |
| # subflow limited by client |
| reset |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "single subflow, limited by client" 0 0 0 |
| |
| # subflow limited by server |
| reset |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "single subflow, limited by server" 1 1 0 |
| |
| # subflow |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "single subflow" 1 1 1 |
| |
| # multiple subflows |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple subflows" 2 2 2 |
| |
| # multiple subflows limited by serverf |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple subflows, limited by server" 2 2 1 |
| } |
| |
| signal_address_tests() |
| { |
| # add_address, unused |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "unused signal address" 0 0 0 |
| chk_add_nr 1 1 |
| |
| # accept and use add_addr |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "signal address" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # accept and use add_addr with an additional subflow |
| # note: signal address in server ns and local addresses in client ns must |
| # belong to different subnets or one of the listed local address could be |
| # used for 'add_addr' subflow |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "subflow and signal" 2 2 2 |
| chk_add_nr 1 1 |
| |
| # accept and use add_addr with additional subflows |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple subflows and signal" 3 3 3 |
| chk_add_nr 1 1 |
| } |
| |
| link_failure_tests() |
| { |
| # accept and use add_addr with additional subflows and link loss |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 1 |
| chk_join_nr "multiple flows, signal, link failure" 3 3 3 |
| chk_add_nr 1 1 |
| } |
| |
| add_addr_timeout_tests() |
| { |
| # add_addr timeout |
| reset_with_add_addr_timeout |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow |
| chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1 |
| chk_add_nr 4 0 |
| |
| # add_addr timeout IPv6 |
| reset_with_add_addr_timeout 6 |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal |
| run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow |
| chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1 |
| chk_add_nr 4 0 |
| } |
| |
| remove_tests() |
| { |
| # single subflow, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow |
| chk_join_nr "remove single subflow" 1 1 1 |
| chk_rm_nr 1 1 |
| |
| # multiple subflows, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow |
| chk_join_nr "remove multiple subflows" 2 2 2 |
| chk_rm_nr 2 2 |
| |
| # single address, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow |
| chk_join_nr "remove single address" 1 1 1 |
| chk_add_nr 1 1 |
| chk_rm_nr 0 0 |
| |
| # subflow and signal, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow |
| chk_join_nr "remove subflow and signal" 2 2 2 |
| chk_add_nr 1 1 |
| chk_rm_nr 1 1 |
| |
| # subflows and signal, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow |
| chk_join_nr "remove subflows and signal" 3 3 3 |
| chk_add_nr 1 1 |
| chk_rm_nr 2 2 |
| |
| # subflows and signal, flush |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow |
| chk_join_nr "flush subflows and signal" 3 3 3 |
| chk_add_nr 1 1 |
| chk_rm_nr 2 2 |
| } |
| |
| add_tests() |
| { |
| # add single subflow |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow |
| chk_join_nr "add single subflow" 1 1 1 |
| |
| # add signal address |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow |
| chk_join_nr "add signal address" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # add multiple subflows |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow |
| chk_join_nr "add multiple subflows" 2 2 2 |
| |
| # add multiple subflows IPv6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow |
| chk_join_nr "add multiple subflows IPv6" 2 2 2 |
| |
| # add multiple addresses IPv6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 2 2 |
| run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow |
| chk_join_nr "add multiple addresses IPv6" 2 2 2 |
| chk_add_nr 2 2 |
| } |
| |
| ipv6_tests() |
| { |
| # subflow IPv6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow |
| run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow |
| chk_join_nr "single subflow IPv6" 1 1 1 |
| |
| # add_address, unused IPv6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal |
| run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow |
| chk_join_nr "unused signal address IPv6" 0 0 0 |
| chk_add_nr 1 1 |
| |
| # signal address IPv6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow |
| chk_join_nr "single address IPv6" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # single address IPv6, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow |
| chk_join_nr "remove single address IPv6" 1 1 1 |
| chk_add_nr 1 1 |
| chk_rm_nr 0 0 |
| |
| # subflow and signal IPv6, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow |
| run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow |
| chk_join_nr "remove subflow and signal IPv6" 2 2 2 |
| chk_add_nr 1 1 |
| chk_rm_nr 1 1 |
| } |
| |
| v4mapped_tests() |
| { |
| # subflow IPv4-mapped to IPv4-mapped |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow |
| run_tests $ns1 $ns2 "::ffff:10.0.1.1" |
| chk_join_nr "single subflow IPv4-mapped" 1 1 1 |
| |
| # signal address IPv4-mapped with IPv4-mapped sk |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal |
| run_tests $ns1 $ns2 "::ffff:10.0.1.1" |
| chk_join_nr "signal address IPv4-mapped" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # subflow v4-map-v6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 "::ffff:10.0.1.1" |
| chk_join_nr "single subflow v4-map-v6" 1 1 1 |
| |
| # signal address v4-map-v6 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| run_tests $ns1 $ns2 "::ffff:10.0.1.1" |
| chk_join_nr "signal address v4-map-v6" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # subflow v6-map-v4 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "single subflow v6-map-v4" 1 1 1 |
| |
| # signal address v6-map-v4 |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "signal address v6-map-v4" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # no subflow IPv6 to v4 address |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "no JOIN with diff families v4-v6" 0 0 0 |
| |
| # no subflow IPv6 to v4 address even if v6 has a valid v4 at the end |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0 |
| |
| # no subflow IPv4 to v6 address, no need to slow down too then |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 dead:beef:1::1 |
| chk_join_nr "no JOIN with diff families v6-v4" 0 0 0 |
| } |
| |
| backup_tests() |
| { |
| # single subflow, backup |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup |
| run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup |
| chk_join_nr "single subflow, backup" 1 1 1 |
| chk_prio_nr 0 1 |
| |
| # single address, backup |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup |
| chk_join_nr "single address, backup" 1 1 1 |
| chk_add_nr 1 1 |
| chk_prio_nr 1 0 |
| } |
| |
| add_addr_ports_tests() |
| { |
| # signal address with port |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "signal address with port" 1 1 1 |
| chk_add_nr 1 1 1 |
| |
| # subflow and signal with port |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "subflow and signal with port" 2 2 2 |
| chk_add_nr 1 1 1 |
| |
| # single address with port, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow |
| chk_join_nr "remove single address with port" 1 1 1 |
| chk_add_nr 1 1 1 |
| chk_rm_nr 0 0 |
| |
| # subflow and signal with port, remove |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow |
| chk_join_nr "remove subflow and signal with port" 2 2 2 |
| chk_add_nr 1 1 1 |
| chk_rm_nr 1 1 |
| |
| # subflows and signal with port, flush |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow |
| chk_join_nr "flush subflows and signal with port" 3 3 3 |
| chk_add_nr 1 1 |
| chk_rm_nr 2 2 |
| |
| # multiple addresses with port |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 2 2 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100 |
| ip netns exec $ns2 ./pm_nl_ctl limits 2 2 |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple addresses with port" 2 2 2 |
| chk_add_nr 2 2 2 |
| |
| # multiple addresses with ports |
| reset |
| ip netns exec $ns1 ./pm_nl_ctl limits 2 2 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101 |
| ip netns exec $ns2 ./pm_nl_ctl limits 2 2 |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple addresses with ports" 2 2 2 |
| chk_add_nr 2 2 2 |
| } |
| |
| syncookies_tests() |
| { |
| # single subflow, syncookies |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "single subflow with syn cookies" 1 1 1 |
| |
| # multiple subflows with syn cookies |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "multiple subflows with syn cookies" 2 2 2 |
| |
| # multiple subflows limited by server |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "subflows limited by server w cookies" 2 2 1 |
| |
| # test signal address with cookies |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 1 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 1 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "signal address with syn cookies" 1 1 1 |
| chk_add_nr 1 1 |
| |
| # test cookie with subflow and signal |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 2 |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 2 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "subflow and signal w cookies" 2 2 2 |
| chk_add_nr 1 1 |
| |
| # accept and use add_addr with additional subflows |
| reset_with_cookies |
| ip netns exec $ns1 ./pm_nl_ctl limits 0 3 |
| ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal |
| ip netns exec $ns2 ./pm_nl_ctl limits 1 3 |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow |
| ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow |
| run_tests $ns1 $ns2 10.0.1.1 |
| chk_join_nr "subflows and signal w. cookies" 3 3 3 |
| chk_add_nr 1 1 |
| } |
| |
| all_tests() |
| { |
| subflows_tests |
| signal_address_tests |
| link_failure_tests |
| add_addr_timeout_tests |
| remove_tests |
| add_tests |
| ipv6_tests |
| v4mapped_tests |
| backup_tests |
| add_addr_ports_tests |
| syncookies_tests |
| } |
| |
| usage() |
| { |
| echo "mptcp_join usage:" |
| echo " -f subflows_tests" |
| echo " -s signal_address_tests" |
| echo " -l link_failure_tests" |
| echo " -t add_addr_timeout_tests" |
| echo " -r remove_tests" |
| echo " -a add_tests" |
| echo " -6 ipv6_tests" |
| echo " -4 v4mapped_tests" |
| echo " -b backup_tests" |
| echo " -p add_addr_ports_tests" |
| echo " -k syncookies_tests" |
| echo " -c capture pcap files" |
| echo " -h help" |
| } |
| |
| sin=$(mktemp) |
| sout=$(mktemp) |
| cin=$(mktemp) |
| cinsent=$(mktemp) |
| cout=$(mktemp) |
| init |
| make_file "$cin" "client" 1 |
| make_file "$sin" "server" 1 |
| trap cleanup EXIT |
| |
| for arg in "$@"; do |
| # check for "capture" arg before launching tests |
| if [[ "${arg}" =~ ^"-"[0-9a-zA-Z]*"c"[0-9a-zA-Z]*$ ]]; then |
| capture=1 |
| fi |
| |
| # exception for the capture option, the rest means: a part of the tests |
| if [ "${arg}" != "-c" ]; then |
| do_all_tests=0 |
| fi |
| done |
| |
| if [ $do_all_tests -eq 1 ]; then |
| all_tests |
| exit $ret |
| fi |
| |
| while getopts 'fsltra64bpkch' opt; do |
| case $opt in |
| f) |
| subflows_tests |
| ;; |
| s) |
| signal_address_tests |
| ;; |
| l) |
| link_failure_tests |
| ;; |
| t) |
| add_addr_timeout_tests |
| ;; |
| r) |
| remove_tests |
| ;; |
| a) |
| add_tests |
| ;; |
| 6) |
| ipv6_tests |
| ;; |
| 4) |
| v4mapped_tests |
| ;; |
| b) |
| backup_tests |
| ;; |
| p) |
| add_addr_ports_tests |
| ;; |
| k) |
| syncookies_tests |
| ;; |
| c) |
| ;; |
| h | *) |
| usage |
| ;; |
| esac |
| done |
| |
| exit $ret |
