Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
deleted file mode 100644
index 6824b31..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Raspberry Pi VideoCore firmware driver
-
-Required properties:
-
-- compatible: Should be "raspberrypi,bcm2835-firmware"
-- mboxes: Phandle to the firmware device's Mailbox.
- (See: ../mailbox/mailbox.txt for more information)
-
-Example:
-
-firmware {
- compatible = "raspberrypi,bcm2835-firmware";
- mboxes = <&mailbox>;
-};
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
new file mode 100644
index 0000000..b48ed87
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi VideoCore firmware driver
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+ - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+ compatible:
+ items:
+ - const: raspberrypi,bcm2835-firmware
+ - const: simple-bus
+
+ mboxes:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: |
+ Phandle to the firmware device's Mailbox.
+ (See: ../mailbox/mailbox.txt for more information)
+
+ clocks:
+ type: object
+
+ properties:
+ compatible:
+ const: raspberrypi,firmware-clocks
+
+ "#clock-cells":
+ const: 1
+ description: >
+ The argument is the ID of the clocks contained by the
+ firmware messages.
+
+ required:
+ - compatible
+ - "#clock-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - mboxes
+
+examples:
+ - |
+ firmware {
+ compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ mboxes = <&mailbox>;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
new file mode 100644
index 0000000..08543ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: brcm,brcm2711-dvp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ dvp: clock@7ef00000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7ef00000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
index 3041657..3e7ca55 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
@@ -3,6 +3,8 @@
Required properties:
- compatible: must be one of:
"brcm,bcm3368-clocks"
+ "brcm,bcm6318-clocks"
+ "brcm,bcm6318-ubus-clocks"
"brcm,bcm6328-clocks"
"brcm,bcm6358-clocks"
"brcm,bcm6362-clocks"
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 8a55fdc..f2ea53832 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -9,7 +9,7 @@
output on a device. The length of a clock specifier is defined by the
value of a #clock-cells property in the clock provider node.
-[1] http://patchwork.ozlabs.org/patch/31551/
+[1] https://patchwork.ozlabs.org/patch/31551/
==Clock providers==
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index bcff681..6165b6d 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -31,6 +31,29 @@
- 5p49v5933 and
- 5p49v5935: (optional) property not present or "clkin".
+For all output ports, a corresponding, optional child node named OUT1,
+OUT2, etc. can represent a each output, and the node can be used to
+specify the following:
+
+- itd,mode: can be one of the following:
+ - VC5_LVPECL
+ - VC5_CMOS
+ - VC5_HCSL33
+ - VC5_LVDS
+ - VC5_CMOS2
+ - VC5_CMOSD
+ - VC5_HCSL25
+
+- idt,voltage-microvolts: can be one of the following
+ - 1800000
+ - 2500000
+ - 3300000
+- idt,slew-percent: Percent of normal, can be one of
+ - 80
+ - 85
+ - 90
+ - 100
+
==Mapping between clock specifier and physical pins==
When referencing the provided clock in the DT using phandle and
@@ -81,6 +104,16 @@
/* Connect XIN input to 25MHz reference */
clocks = <&ref25m>;
clock-names = "xin";
+
+ OUT1 {
+ itd,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <80>;
+ };
+ OUT2 {
+ ...
+ };
+ ...
};
};
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 20d2638..db3d0ea 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -15,7 +15,9 @@
properties:
compatible:
- const: qcom,msm8916-a53pll
+ enum:
+ - qcom,ipq6018-a53pll
+ - qcom,msm8916-a53pll
reg:
maxItems: 1
@@ -23,6 +25,14 @@
'#clock-cells':
const: 0
+ clocks:
+ items:
+ - description: board XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
required:
- compatible
- reg
@@ -38,3 +48,12 @@
reg = <0xb016000 0x40>;
#clock-cells = <0>;
};
+ #Example 2 - A53 PLL found on IPQ6018 devices
+ - |
+ a53pll_ipq: clock-controller@b116000 {
+ compatible = "qcom,ipq6018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo>;
+ clock-names = "xo";
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
new file mode 100644
index 0000000..d673ede
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kryocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm clock controller for MSM8996 CPUs
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+ Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
+ and clock 1 is for Perf cluster.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8996-apcc
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: Primary PLL clock for power cluster (little)
+ - description: Primary PLL clock for perf cluster (big)
+ - description: Alternate PLL clock for power cluster (little)
+ - description: Alternate PLL clock for perf cluster (big)
+
+ clock-names:
+ items:
+ - const: pwrcl_pll
+ - const: perfcl_pll
+ - const: pwrcl_alt_pll
+ - const: perfcl_alt_pll
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Example for msm8996
+ - |
+ kryocc: clock-controller@6400000 {
+ compatible = "qcom,msm8996-apcc";
+ reg = <0x6400000 0x90000>;
+ #clock-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 90a1349..b44a062 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -13,13 +13,17 @@
"qcom,rpmcc-msm8660", "qcom,rpmcc"
"qcom,rpmcc-apq8060", "qcom,rpmcc"
"qcom,rpmcc-msm8916", "qcom,rpmcc"
+ "qcom,rpmcc-msm8936", "qcom,rpmcc"
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-msm8976", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
"qcom,rpmcc-ipq806x", "qcom,rpmcc"
+ "qcom,rpmcc-msm8992",·"qcom,rpmcc"
+ "qcom,rpmcc-msm8994",·"qcom,rpmcc"
"qcom,rpmcc-msm8996", "qcom,rpmcc"
"qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
+ "qcom,rpmcc-sdm660", "qcom,rpmcc"
- #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
new file mode 100644
index 0000000..b83f413
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Clock Pulse Generator (CPG) generates core clocks for the SoC. It
+ includes PLLs, and fixed and variable ratio dividers.
+
+ The CPG may also provide a Clock Domain for SoC devices, in combination with
+ the CPG Module Stop (MSTP) Clocks.
+
+properties:
+ compatible:
+ oneOf:
+ - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
+ - const: renesas,r8a7740-cpg-clocks # R-Mobile A1
+ - const: renesas,r8a7778-cpg-clocks # R-Car M1
+ - const: renesas,r8a7779-cpg-clocks # R-Car H1
+ - items:
+ - enum:
+ - renesas,r7s72100-cpg-clocks # RZ/A1H
+ - const: renesas,rz-cpg-clocks # RZ/A1
+ - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
+
+ reg:
+ maxItems: 1
+
+ clocks: true
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names: true
+
+ renesas,mode:
+ description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+
+ '#power-domain-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a73a4-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll2s
+ - const: pll2h
+ - const: z
+ - const: z2
+ - const: i
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: zx
+ - const: zs
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7740-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+ - description: extalr
+
+ clock-output-names:
+ items:
+ - const: system
+ - const: pllc0
+ - const: pllc1
+ - const: pllc2
+ - const: r
+ - const: usb24s
+ - const: i
+ - const: zg
+ - const: b
+ - const: m1
+ - const: hp
+ - const: hpp
+ - const: usbp
+ - const: s
+ - const: zb
+ - const: m3
+ - const: cp
+
+ required:
+ - renesas,mode
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7778-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: pllb
+ - const: b
+ - const: out
+ - const: p
+ - const: s
+ - const: s1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7779-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: z
+ - const: zs
+ - const: s
+ - const: s1
+ - const: p
+ - const: b
+ - const: out
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r7s72100-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: usb_x1
+
+ clock-output-names:
+ items:
+ - const: pll
+ - const: i
+ - const: g
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,sh73a0-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll3
+ - const: dsi0phy
+ - const: dsi1phy
+ - const: zg
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: z
+ - const: zx
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r8a7778-cpg-clocks
+ - renesas,r8a7779-cpg-clocks
+ - renesas,rz-cpg-clocks
+ then:
+ required:
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7740-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+ "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+ "usbp", "s", "zb", "m3", "cp";
+ renesas,mode = <0x05>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index c745bd6..e13aee8 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -33,6 +33,7 @@
- renesas,r8a774a1-cpg-mssr # RZ/G2M
- renesas,r8a774b1-cpg-mssr # RZ/G2N
- renesas,r8a774c0-cpg-mssr # RZ/G2E
+ - renesas,r8a774e1-cpg-mssr # RZ/G2H
- renesas,r8a7790-cpg-mssr # R-Car H2
- renesas,r8a7791-cpg-mssr # R-Car M2-W
- renesas,r8a7792-cpg-mssr # R-Car V2H
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
deleted file mode 100644
index ece9239..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Renesas R8A73A4 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a73a4-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
- - #clock-cells: Must be 1
-
- - clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
- "m1", "m2", "zx", "zs", and "hp".
-
-
-Example
--------
-
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a73a4-cpg-clocks";
- reg = <0 0xe6150000 0 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll2",
- "pll2s", "pll2h", "z", "z2",
- "i", "m3", "b", "m1", "m2",
- "zx", "zs", "hp";
- };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
deleted file mode 100644
index 2c03302..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas R8A7740 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
-and several fixed ratio and variable ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7740-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the three parent clocks
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are
- "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
- "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
-
- - renesas,mode: board-specific settings of the MD_CK* bits
-
-
-Example
--------
-
-cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7740-cpg-clocks";
- reg = <0xe6150000 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
- #clock-cells = <1>;
- clock-output-names = "system", "pllc0", "pllc1",
- "pllc2", "r",
- "usb24s",
- "i", "zg", "b", "m1", "hp",
- "hpp", "usbp", "s", "zb", "m3",
- "cp";
-};
-
-&cpg_clocks {
- renesas,mode = <0x05>;
-};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
deleted file mode 100644
index 7cc4c03..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Renesas R8A7778 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7778-cpg-clocks"
- - reg: Base address and length of the memory resource used by the CPG
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are
- "plla", "pllb", "b", "out", "p", "s", and "s1".
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@ffc80000 {
- compatible = "renesas,r8a7778-cpg-clocks";
- reg = <0xffc80000 0x80>;
- #clock-cells = <1>;
- clocks = <&extal_clk>;
- clock-output-names = "plla", "pllb", "b",
- "out", "p", "s", "s1";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- sdhi0: sd@ffe4c000 {
- compatible = "renesas,sdhi-r8a7778";
- reg = <0xffe4c000 0x100>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
- };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
deleted file mode 100644
index 8c81547..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Renesas R8A7779 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7779-cpg-clocks"
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clock
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are "plla",
- "z", "zs", "s", "s1", "p", "b", "out".
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@ffc80000 {
- compatible = "renesas,r8a7779-cpg-clocks";
- reg = <0xffc80000 0x30>;
- clocks = <&extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "plla", "z", "zs", "s", "s1", "p",
- "b", "out";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- sata: sata@fc600000 {
- compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
- reg = <0xfc600000 0x2000>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7779_CLK_SATA>;
- power-domains = <&cpg_clocks>;
- };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
deleted file mode 100644
index 8ff3e27..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Renesas RZ/A1 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable
-CPU and GPU clocks, and several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be one of
- - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
- and "renesas,rz-cpg-clocks" as a fallback.
- - reg: Base address and length of the memory resource used by the CPG
- - clocks: References to possible parent clocks. Order must match clock modes
- in the datasheet. For the r7s72100, this is extal, usb_x1.
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are "pll",
- "i", and "g"
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@fcfe0000 {
- #clock-cells = <1>;
- compatible = "renesas,r7s72100-cpg-clocks",
- "renesas,rz-cpg-clocks";
- reg = <0xfcfe0000 0x18>;
- clocks = <&extal_clk>, <&usb_x1_clk>;
- clock-output-names = "pll", "i", "g";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- };
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
deleted file mode 100644
index a8978ec..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas SH73A0 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,sh73a0-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
- - #clock-cells: Must be 1
-
- - clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
- "m1", "m2", "z", "zx", and "hp".
-
-
-Example
--------
-
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,sh73a0-cpg-clocks";
- reg = <0 0xe6150000 0 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll2",
- "pll3", "dsi0phy", "dsi1phy",
- "zg", "m3", "b", "m1", "m2",
- "z", "zx", "hp";
- };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
index ea1a9db..a4f28ec 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si514.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
@@ -6,7 +6,7 @@
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Si514 datasheet
- http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
Required properties:
- compatible: Shall be "silabs,si514"
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index f00191c..8fe6f80 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -2,7 +2,7 @@
Reference
[1] Si5351A/B/C Data Sheet
- http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
The Si5351a/b/c are programmable i2c clock generators with up to 8 output
clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
index c09f21e..901935e 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si570.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -7,9 +7,9 @@
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Si570/571 Data Sheet
- http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
[3] Si598/599 Data Sheet
- http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
Required properties:
- compatible: Shall be one of "silabs,si570", "silabs,si571",
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
index 959d966..21c3ff7 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -1,7 +1,7 @@
Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
synthesizer/multiplier/divider.
-Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
I2C device node required properties:
- compatible: shall be "ti,cdce706".
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
index 26544c8..df42ab7 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -4,10 +4,10 @@
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] http://www.ti.com/product/cdce913
-[3] http://www.ti.com/product/cdce925
-[4] http://www.ti.com/product/cdce937
-[5] http://www.ti.com/product/cdce949
+[2] https://www.ti.com/product/cdce913
+[3] https://www.ti.com/product/cdce925
+[4] https://www.ti.com/product/cdce937
+[5] https://www.ti.com/product/cdce949
The driver provides clock sources for each output Y1 through Y5.
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 326f91b..690a258 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -121,7 +121,6 @@
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
- select RATIONAL
help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
@@ -163,7 +162,6 @@
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
- select RATIONAL
help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 8c83977..784f12c 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,4 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+ tristate "Broadcom BCM2711 DVP support"
+ depends on ARCH_BCM2835 ||COMPILE_TEST
+ depends on COMMON_CLK
+ default ARCH_BCM2835
+ select RESET_SIMPLE
+ help
+ Enable common clock framework support for the Broadcom BCM2711
+ DVP Controller.
+
config CLK_BCM2835
bool "Broadcom BCM2835 clock support"
depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 0070ddf..edb66b4 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2711_DVP) += clk-bcm2711-dvp.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o
obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o
diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
new file mode 100644
index 0000000..8333e20
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT 0x04
+#define DVP_HT_RPI_MISC_CONFIG 0x08
+
+#define NR_CLOCKS 2
+#define NR_RESETS 6
+
+struct clk_dvp {
+ struct clk_hw_onecell_data *data;
+ struct reset_simple_data reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+ .index = 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *data;
+ struct resource *res;
+ struct clk_dvp *dvp;
+ void __iomem *base;
+ int ret;
+
+ dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+ if (!dvp)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, dvp);
+
+ dvp->data = devm_kzalloc(&pdev->dev,
+ struct_size(dvp->data, hws, NR_CLOCKS),
+ GFP_KERNEL);
+ if (!dvp->data)
+ return -ENOMEM;
+ data = dvp->data;
+
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ dvp->reset.rcdev.owner = THIS_MODULE;
+ dvp->reset.rcdev.nr_resets = NR_RESETS;
+ dvp->reset.rcdev.ops = &reset_simple_ops;
+ dvp->reset.rcdev.of_node = pdev->dev.of_node;
+ dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+ spin_lock_init(&dvp->reset.lock);
+
+ ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev);
+ if (ret)
+ return ret;
+
+ data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+ "hdmi0-108MHz",
+ &clk_dvp_parent, 0,
+ base + DVP_HT_RPI_MISC_CONFIG, 3,
+ CLK_GATE_SET_TO_DISABLE,
+ &dvp->reset.lock);
+ if (IS_ERR(data->hws[0]))
+ return PTR_ERR(data->hws[0]);
+
+ data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+ "hdmi1-108MHz",
+ &clk_dvp_parent, 0,
+ base + DVP_HT_RPI_MISC_CONFIG, 4,
+ CLK_GATE_SET_TO_DISABLE,
+ &dvp->reset.lock);
+ if (IS_ERR(data->hws[1])) {
+ ret = PTR_ERR(data->hws[1]);
+ goto unregister_clk0;
+ }
+
+ data->num = NR_CLOCKS;
+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+ data);
+ if (ret)
+ goto unregister_clk1;
+
+ return 0;
+
+unregister_clk1:
+ clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+ clk_hw_unregister_gate(data->hws[0]);
+ return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+ struct clk_dvp *dvp = platform_get_drvdata(pdev);
+ struct clk_hw_onecell_data *data = dvp->data;
+
+ clk_hw_unregister_gate(data->hws[1]);
+ clk_hw_unregister_gate(data->hws[0]);
+
+ return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+ { .compatible = "brcm,brcm2711-dvp", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver clk_dvp_driver = {
+ .probe = clk_dvp_probe,
+ .remove = clk_dvp_remove,
+ .driver = {
+ .name = "brcm2711-dvp",
+ .of_match_table = clk_dvp_dt_ids,
+ },
+};
+module_platform_driver(clk_dvp_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>");
+MODULE_DESCRIPTION("BCM2711 DVP clock driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6bb7efa..027eba3 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -421,6 +421,7 @@
u32 reference_enable_mask;
/* Bit in CM_LOCK to indicate when the PLL has locked. */
u32 lock_mask;
+ u32 flags;
const struct bcm2835_pll_ana_bits *ana;
@@ -1310,7 +1311,7 @@
init.num_parents = 1;
init.name = pll_data->name;
init.ops = &bcm2835_pll_clk_ops;
- init.flags = CLK_IGNORE_UNUSED;
+ init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
@@ -1684,10 +1685,33 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
- /*
- * PLLB is used for the ARM's clock. Controlled by firmware, see
- * clk-raspberrypi.c.
- */
+ /* PLLB is used for the ARM's clock. */
+ [BCM2835_PLLB] = REGISTER_PLL(
+ SOC_ALL,
+ .name = "pllb",
+ .cm_ctrl_reg = CM_PLLB,
+ .a2w_ctrl_reg = A2W_PLLB_CTRL,
+ .frac_reg = A2W_PLLB_FRAC,
+ .ana_reg_base = A2W_PLLB_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKB,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+ .flags = CLK_GET_RATE_NOCACHE),
+ [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV(
+ SOC_ALL,
+ .name = "pllb_arm",
+ .source_pll = "pllb",
+ .cm_reg = CM_PLLB,
+ .a2w_reg = A2W_PLLB_ARM,
+ .load_mask = CM_PLLB_LOADARM,
+ .hold_mask = CM_PLLB_HOLDARM,
+ .fixed_divider = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
/*
* PLLC is the core PLL, used to drive the core VPU clock.
diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c
index 98e8849..89297c5 100644
--- a/drivers/clk/bcm/clk-bcm63xx-gate.c
+++ b/drivers/clk/bcm/clk-bcm63xx-gate.c
@@ -6,6 +6,14 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <dt-bindings/clock/bcm3368-clock.h>
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/clock/bcm6328-clock.h>
+#include <dt-bindings/clock/bcm6358-clock.h>
+#include <dt-bindings/clock/bcm6362-clock.h>
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/clock/bcm63268-clock.h>
+
struct clk_bcm63xx_table_entry {
const char * const name;
u8 bit;
@@ -20,126 +28,458 @@
};
static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
- { .name = "mac", .bit = 3, },
- { .name = "tc", .bit = 5, },
- { .name = "us_top", .bit = 6, },
- { .name = "ds_top", .bit = 7, },
- { .name = "acm", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbs", .bit = 10, },
- { .name = "bmu", .bit = 11, },
- { .name = "pcm", .bit = 12, },
- { .name = "ntp", .bit = 13, },
- { .name = "acp_b", .bit = 14, },
- { .name = "acp_a", .bit = 15, },
- { .name = "emusb", .bit = 17, },
- { .name = "enet0", .bit = 18, },
- { .name = "enet1", .bit = 19, },
- { .name = "usbsu", .bit = 20, },
- { .name = "ephy", .bit = 21, },
- { },
+ {
+ .name = "mac",
+ .bit = BCM3368_CLK_MAC,
+ }, {
+ .name = "tc",
+ .bit = BCM3368_CLK_TC,
+ }, {
+ .name = "us_top",
+ .bit = BCM3368_CLK_US_TOP,
+ }, {
+ .name = "ds_top",
+ .bit = BCM3368_CLK_DS_TOP,
+ }, {
+ .name = "acm",
+ .bit = BCM3368_CLK_ACM,
+ }, {
+ .name = "spi",
+ .bit = BCM3368_CLK_SPI,
+ }, {
+ .name = "usbs",
+ .bit = BCM3368_CLK_USBS,
+ }, {
+ .name = "bmu",
+ .bit = BCM3368_CLK_BMU,
+ }, {
+ .name = "pcm",
+ .bit = BCM3368_CLK_PCM,
+ }, {
+ .name = "ntp",
+ .bit = BCM3368_CLK_NTP,
+ }, {
+ .name = "acp_b",
+ .bit = BCM3368_CLK_ACP_B,
+ }, {
+ .name = "acp_a",
+ .bit = BCM3368_CLK_ACP_A,
+ }, {
+ .name = "emusb",
+ .bit = BCM3368_CLK_EMUSB,
+ }, {
+ .name = "enet0",
+ .bit = BCM3368_CLK_ENET0,
+ }, {
+ .name = "enet1",
+ .bit = BCM3368_CLK_ENET1,
+ }, {
+ .name = "usbsu",
+ .bit = BCM3368_CLK_USBSU,
+ }, {
+ .name = "ephy",
+ .bit = BCM3368_CLK_EPHY,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+ {
+ .name = "adsl_asb",
+ .bit = BCM6318_CLK_ADSL_ASB,
+ }, {
+ .name = "usb_asb",
+ .bit = BCM6318_CLK_USB_ASB,
+ }, {
+ .name = "mips_asb",
+ .bit = BCM6318_CLK_MIPS_ASB,
+ }, {
+ .name = "pcie_asb",
+ .bit = BCM6318_CLK_PCIE_ASB,
+ }, {
+ .name = "phymips_asb",
+ .bit = BCM6318_CLK_PHYMIPS_ASB,
+ }, {
+ .name = "robosw_asb",
+ .bit = BCM6318_CLK_ROBOSW_ASB,
+ }, {
+ .name = "sar_asb",
+ .bit = BCM6318_CLK_SAR_ASB,
+ }, {
+ .name = "sdr_asb",
+ .bit = BCM6318_CLK_SDR_ASB,
+ }, {
+ .name = "swreg_asb",
+ .bit = BCM6318_CLK_SWREG_ASB,
+ }, {
+ .name = "periph_asb",
+ .bit = BCM6318_CLK_PERIPH_ASB,
+ }, {
+ .name = "cpubus160",
+ .bit = BCM6318_CLK_CPUBUS160,
+ }, {
+ .name = "adsl",
+ .bit = BCM6318_CLK_ADSL,
+ }, {
+ .name = "sar125",
+ .bit = BCM6318_CLK_SAR125,
+ }, {
+ .name = "mips",
+ .bit = BCM6318_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "pcie",
+ .bit = BCM6318_CLK_PCIE,
+ }, {
+ .name = "robosw250",
+ .bit = BCM6318_CLK_ROBOSW250,
+ }, {
+ .name = "robosw025",
+ .bit = BCM6318_CLK_ROBOSW025,
+ }, {
+ .name = "sdr",
+ .bit = BCM6318_CLK_SDR,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "usbd",
+ .bit = BCM6318_CLK_USBD,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6318_CLK_HSSPI,
+ }, {
+ .name = "pcie25",
+ .bit = BCM6318_CLK_PCIE25,
+ }, {
+ .name = "phymips",
+ .bit = BCM6318_CLK_PHYMIPS,
+ }, {
+ .name = "afe",
+ .bit = BCM6318_CLK_AFE,
+ }, {
+ .name = "qproc",
+ .bit = BCM6318_CLK_QPROC,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = {
+ {
+ .name = "adsl-ubus",
+ .bit = BCM6318_UCLK_ADSL,
+ }, {
+ .name = "arb-ubus",
+ .bit = BCM6318_UCLK_ARB,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "mips-ubus",
+ .bit = BCM6318_UCLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "pcie-ubus",
+ .bit = BCM6318_UCLK_PCIE,
+ }, {
+ .name = "periph-ubus",
+ .bit = BCM6318_UCLK_PERIPH,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "phymips-ubus",
+ .bit = BCM6318_UCLK_PHYMIPS,
+ }, {
+ .name = "robosw-ubus",
+ .bit = BCM6318_UCLK_ROBOSW,
+ }, {
+ .name = "sar-ubus",
+ .bit = BCM6318_UCLK_SAR,
+ }, {
+ .name = "sdr-ubus",
+ .bit = BCM6318_UCLK_SDR,
+ }, {
+ .name = "usb-ubus",
+ .bit = BCM6318_UCLK_USB,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
- { .name = "phy_mips", .bit = 0, },
- { .name = "adsl_qproc", .bit = 1, },
- { .name = "adsl_afe", .bit = 2, },
- { .name = "adsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "sar", .bit = 5, },
- { .name = "pcm", .bit = 6, },
- { .name = "usbd", .bit = 7, },
- { .name = "usbh", .bit = 8, },
- { .name = "hsspi", .bit = 9, },
- { .name = "pcie", .bit = 10, },
- { .name = "robosw", .bit = 11, },
- { },
+ {
+ .name = "phy_mips",
+ .bit = BCM6328_CLK_PHYMIPS,
+ }, {
+ .name = "adsl_qproc",
+ .bit = BCM6328_CLK_ADSL_QPROC,
+ }, {
+ .name = "adsl_afe",
+ .bit = BCM6328_CLK_ADSL_AFE,
+ }, {
+ .name = "adsl",
+ .bit = BCM6328_CLK_ADSL,
+ }, {
+ .name = "mips",
+ .bit = BCM6328_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "sar",
+ .bit = BCM6328_CLK_SAR,
+ }, {
+ .name = "pcm",
+ .bit = BCM6328_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6328_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6328_CLK_USBH,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6328_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM6328_CLK_PCIE,
+ }, {
+ .name = "robosw",
+ .bit = BCM6328_CLK_ROBOSW,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = {
- { .name = "enet", .bit = 4, },
- { .name = "adslphy", .bit = 5, },
- { .name = "pcm", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbs", .bit = 10, },
- { .name = "sar", .bit = 11, },
- { .name = "emusb", .bit = 17, },
- { .name = "enet0", .bit = 18, },
- { .name = "enet1", .bit = 19, },
- { .name = "usbsu", .bit = 20, },
- { .name = "ephy", .bit = 21, },
- { },
+ {
+ .name = "enet",
+ .bit = BCM6358_CLK_ENET,
+ }, {
+ .name = "adslphy",
+ .bit = BCM6358_CLK_ADSLPHY,
+ }, {
+ .name = "pcm",
+ .bit = BCM6358_CLK_PCM,
+ }, {
+ .name = "spi",
+ .bit = BCM6358_CLK_SPI,
+ }, {
+ .name = "usbs",
+ .bit = BCM6358_CLK_USBS,
+ }, {
+ .name = "sar",
+ .bit = BCM6358_CLK_SAR,
+ }, {
+ .name = "emusb",
+ .bit = BCM6358_CLK_EMUSB,
+ }, {
+ .name = "enet0",
+ .bit = BCM6358_CLK_ENET0,
+ }, {
+ .name = "enet1",
+ .bit = BCM6358_CLK_ENET1,
+ }, {
+ .name = "usbsu",
+ .bit = BCM6358_CLK_USBSU,
+ }, {
+ .name = "ephy",
+ .bit = BCM6358_CLK_EPHY,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = {
- { .name = "adsl_qproc", .bit = 1, },
- { .name = "adsl_afe", .bit = 2, },
- { .name = "adsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "wlan_ocp", .bit = 5, },
- { .name = "swpkt_usb", .bit = 7, },
- { .name = "swpkt_sar", .bit = 8, },
- { .name = "sar", .bit = 9, },
- { .name = "robosw", .bit = 10, },
- { .name = "pcm", .bit = 11, },
- { .name = "usbd", .bit = 12, },
- { .name = "usbh", .bit = 13, },
- { .name = "ipsec", .bit = 14, },
- { .name = "spi", .bit = 15, },
- { .name = "hsspi", .bit = 16, },
- { .name = "pcie", .bit = 17, },
- { .name = "fap", .bit = 18, },
- { .name = "phymips", .bit = 19, },
- { .name = "nand", .bit = 20, },
- { },
+ {
+ .name = "adsl_qproc",
+ .bit = BCM6362_CLK_ADSL_QPROC,
+ }, {
+ .name = "adsl_afe",
+ .bit = BCM6362_CLK_ADSL_AFE,
+ }, {
+ .name = "adsl",
+ .bit = BCM6362_CLK_ADSL,
+ }, {
+ .name = "mips",
+ .bit = BCM6362_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "wlan_ocp",
+ .bit = BCM6362_CLK_WLAN_OCP,
+ }, {
+ .name = "swpkt_usb",
+ .bit = BCM6362_CLK_SWPKT_USB,
+ }, {
+ .name = "swpkt_sar",
+ .bit = BCM6362_CLK_SWPKT_SAR,
+ }, {
+ .name = "sar",
+ .bit = BCM6362_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM6362_CLK_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM6362_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6362_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6362_CLK_USBH,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6362_CLK_IPSEC,
+ }, {
+ .name = "spi",
+ .bit = BCM6362_CLK_SPI,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6362_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM6362_CLK_PCIE,
+ }, {
+ .name = "fap",
+ .bit = BCM6362_CLK_FAP,
+ }, {
+ .name = "phymips",
+ .bit = BCM6362_CLK_PHYMIPS,
+ }, {
+ .name = "nand",
+ .bit = BCM6362_CLK_NAND,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = {
- { .name = "vdsl_qproc", .bit = 2, },
- { .name = "vdsl_afe", .bit = 3, },
- { .name = "vdsl_bonding", .bit = 4, },
- { .name = "vdsl", .bit = 5, },
- { .name = "phymips", .bit = 6, },
- { .name = "swpkt_usb", .bit = 7, },
- { .name = "swpkt_sar", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbd", .bit = 10, },
- { .name = "sar", .bit = 11, },
- { .name = "robosw", .bit = 12, },
- { .name = "utopia", .bit = 13, },
- { .name = "pcm", .bit = 14, },
- { .name = "usbh", .bit = 15, },
- { .name = "disable_gless", .bit = 16, },
- { .name = "nand", .bit = 17, },
- { .name = "ipsec", .bit = 18, },
- { },
+ {
+ .name = "vdsl_qproc",
+ .bit = BCM6368_CLK_VDSL_QPROC,
+ }, {
+ .name = "vdsl_afe",
+ .bit = BCM6368_CLK_VDSL_AFE,
+ }, {
+ .name = "vdsl_bonding",
+ .bit = BCM6368_CLK_VDSL_BONDING,
+ }, {
+ .name = "vdsl",
+ .bit = BCM6368_CLK_VDSL,
+ }, {
+ .name = "phymips",
+ .bit = BCM6368_CLK_PHYMIPS,
+ }, {
+ .name = "swpkt_usb",
+ .bit = BCM6368_CLK_SWPKT_USB,
+ }, {
+ .name = "swpkt_sar",
+ .bit = BCM6368_CLK_SWPKT_SAR,
+ }, {
+ .name = "spi",
+ .bit = BCM6368_CLK_SPI,
+ }, {
+ .name = "usbd",
+ .bit = BCM6368_CLK_USBD,
+ }, {
+ .name = "sar",
+ .bit = BCM6368_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM6368_CLK_ROBOSW,
+ }, {
+ .name = "utopia",
+ .bit = BCM6368_CLK_UTOPIA,
+ }, {
+ .name = "pcm",
+ .bit = BCM6368_CLK_PCM,
+ }, {
+ .name = "usbh",
+ .bit = BCM6368_CLK_USBH,
+ }, {
+ .name = "disable_gless",
+ .bit = BCM6368_CLK_DIS_GLESS,
+ }, {
+ .name = "nand",
+ .bit = BCM6368_CLK_NAND,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6368_CLK_IPSEC,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = {
- { .name = "disable_gless", .bit = 0, },
- { .name = "vdsl_qproc", .bit = 1, },
- { .name = "vdsl_afe", .bit = 2, },
- { .name = "vdsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "wlan_ocp", .bit = 5, },
- { .name = "dect", .bit = 6, },
- { .name = "fap0", .bit = 7, },
- { .name = "fap1", .bit = 8, },
- { .name = "sar", .bit = 9, },
- { .name = "robosw", .bit = 10, },
- { .name = "pcm", .bit = 11, },
- { .name = "usbd", .bit = 12, },
- { .name = "usbh", .bit = 13, },
- { .name = "ipsec", .bit = 14, },
- { .name = "spi", .bit = 15, },
- { .name = "hsspi", .bit = 16, },
- { .name = "pcie", .bit = 17, },
- { .name = "phymips", .bit = 18, },
- { .name = "gmac", .bit = 19, },
- { .name = "nand", .bit = 20, },
- { .name = "tbus", .bit = 27, },
- { .name = "robosw250", .bit = 31, },
- { },
+ {
+ .name = "disable_gless",
+ .bit = BCM63268_CLK_DIS_GLESS,
+ }, {
+ .name = "vdsl_qproc",
+ .bit = BCM63268_CLK_VDSL_QPROC,
+ }, {
+ .name = "vdsl_afe",
+ .bit = BCM63268_CLK_VDSL_AFE,
+ }, {
+ .name = "vdsl",
+ .bit = BCM63268_CLK_VDSL,
+ }, {
+ .name = "mips",
+ .bit = BCM63268_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "wlan_ocp",
+ .bit = BCM63268_CLK_WLAN_OCP,
+ }, {
+ .name = "dect",
+ .bit = BCM63268_CLK_DECT,
+ }, {
+ .name = "fap0",
+ .bit = BCM63268_CLK_FAP0,
+ }, {
+ .name = "fap1",
+ .bit = BCM63268_CLK_FAP1,
+ }, {
+ .name = "sar",
+ .bit = BCM63268_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM63268_CLK_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM63268_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM63268_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM63268_CLK_USBH,
+ }, {
+ .name = "ipsec",
+ .bit = BCM63268_CLK_IPSEC,
+ }, {
+ .name = "spi",
+ .bit = BCM63268_CLK_SPI,
+ }, {
+ .name = "hsspi",
+ .bit = BCM63268_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM63268_CLK_PCIE,
+ }, {
+ .name = "phymips",
+ .bit = BCM63268_CLK_PHYMIPS,
+ }, {
+ .name = "gmac",
+ .bit = BCM63268_CLK_GMAC,
+ }, {
+ .name = "nand",
+ .bit = BCM63268_CLK_NAND,
+ }, {
+ .name = "tbus",
+ .bit = BCM63268_CLK_TBUS,
+ }, {
+ .name = "robosw250",
+ .bit = BCM63268_CLK_ROBOSW250,
+ }, {
+ /* sentinel */
+ },
};
static int clk_bcm63xx_probe(struct platform_device *pdev)
@@ -155,6 +495,7 @@
for (entry = table; entry->name; entry++)
maxbit = max_t(u8, maxbit, entry->bit);
+ maxbit++;
hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit),
GFP_KERNEL);
@@ -217,6 +558,8 @@
static const struct of_device_id clk_bcm63xx_dt_ids[] = {
{ .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, },
+ { .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, },
+ { .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, },
{ .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, },
{ .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, },
{ .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, },
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 1654fd0..5cc8295 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -18,30 +18,56 @@
#include <soc/bcm2835/raspberrypi-firmware.h>
-#define RPI_FIRMWARE_ARM_CLK_ID 0x00000003
+enum rpi_firmware_clk_id {
+ RPI_FIRMWARE_EMMC_CLK_ID = 1,
+ RPI_FIRMWARE_UART_CLK_ID,
+ RPI_FIRMWARE_ARM_CLK_ID,
+ RPI_FIRMWARE_CORE_CLK_ID,
+ RPI_FIRMWARE_V3D_CLK_ID,
+ RPI_FIRMWARE_H264_CLK_ID,
+ RPI_FIRMWARE_ISP_CLK_ID,
+ RPI_FIRMWARE_SDRAM_CLK_ID,
+ RPI_FIRMWARE_PIXEL_CLK_ID,
+ RPI_FIRMWARE_PWM_CLK_ID,
+ RPI_FIRMWARE_HEVC_CLK_ID,
+ RPI_FIRMWARE_EMMC2_CLK_ID,
+ RPI_FIRMWARE_M2MC_CLK_ID,
+ RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+ RPI_FIRMWARE_NUM_CLK_ID,
+};
+
+static char *rpi_firmware_clk_names[] = {
+ [RPI_FIRMWARE_EMMC_CLK_ID] = "emmc",
+ [RPI_FIRMWARE_UART_CLK_ID] = "uart",
+ [RPI_FIRMWARE_ARM_CLK_ID] = "arm",
+ [RPI_FIRMWARE_CORE_CLK_ID] = "core",
+ [RPI_FIRMWARE_V3D_CLK_ID] = "v3d",
+ [RPI_FIRMWARE_H264_CLK_ID] = "h264",
+ [RPI_FIRMWARE_ISP_CLK_ID] = "isp",
+ [RPI_FIRMWARE_SDRAM_CLK_ID] = "sdram",
+ [RPI_FIRMWARE_PIXEL_CLK_ID] = "pixel",
+ [RPI_FIRMWARE_PWM_CLK_ID] = "pwm",
+ [RPI_FIRMWARE_HEVC_CLK_ID] = "hevc",
+ [RPI_FIRMWARE_EMMC2_CLK_ID] = "emmc2",
+ [RPI_FIRMWARE_M2MC_CLK_ID] = "m2mc",
+ [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = "pixel-bvb",
+};
#define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0)
#define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1)
-/*
- * Even though the firmware interface alters 'pllb' the frequencies are
- * provided as per 'pllb_arm'. We need to scale before passing them trough.
- */
-#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2
-
-#define A2W_PLL_FRAC_BITS 20
-
struct raspberrypi_clk {
struct device *dev;
struct rpi_firmware *firmware;
struct platform_device *cpufreq;
+};
- unsigned long min_rate;
- unsigned long max_rate;
+struct raspberrypi_clk_data {
+ struct clk_hw hw;
- struct clk_hw pllb;
- struct clk_hw *pllb_arm;
- struct clk_lookup *pllb_arm_lookup;
+ unsigned int id;
+
+ struct raspberrypi_clk *rpi;
};
/*
@@ -64,11 +90,12 @@
__le32 disable_turbo;
} __packed;
-static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag,
- u32 clk, u32 *val)
+static int raspberrypi_clock_property(struct rpi_firmware *firmware,
+ const struct raspberrypi_clk_data *data,
+ u32 tag, u32 *val)
{
struct raspberrypi_firmware_prop msg = {
- .id = cpu_to_le32(clk),
+ .id = cpu_to_le32(data->id),
.val = cpu_to_le32(*val),
.disable_turbo = cpu_to_le32(1),
};
@@ -83,16 +110,16 @@
return 0;
}
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
{
- struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
- pllb);
+ struct raspberrypi_clk_data *data =
+ container_of(hw, struct raspberrypi_clk_data, hw);
+ struct raspberrypi_clk *rpi = data->rpi;
u32 val = 0;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
- RPI_FIRMWARE_GET_CLOCK_STATE,
- RPI_FIRMWARE_ARM_CLK_ID, &val);
+ ret = raspberrypi_clock_property(rpi->firmware, data,
+ RPI_FIRMWARE_GET_CLOCK_STATE, &val);
if (ret)
return 0;
@@ -100,36 +127,34 @@
}
-static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
- pllb);
+ struct raspberrypi_clk_data *data =
+ container_of(hw, struct raspberrypi_clk_data, hw);
+ struct raspberrypi_clk *rpi = data->rpi;
u32 val = 0;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
- RPI_FIRMWARE_GET_CLOCK_RATE,
- RPI_FIRMWARE_ARM_CLK_ID,
- &val);
+ ret = raspberrypi_clock_property(rpi->firmware, data,
+ RPI_FIRMWARE_GET_CLOCK_RATE, &val);
if (ret)
return ret;
- return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+ return val;
}
-static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
+static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
- struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
- pllb);
- u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+ struct raspberrypi_clk_data *data =
+ container_of(hw, struct raspberrypi_clk_data, hw);
+ struct raspberrypi_clk *rpi = data->rpi;
+ u32 _rate = rate;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
- RPI_FIRMWARE_SET_CLOCK_RATE,
- RPI_FIRMWARE_ARM_CLK_ID,
- &new_rate);
+ ret = raspberrypi_clock_property(rpi->firmware, data,
+ RPI_FIRMWARE_SET_CLOCK_RATE, &_rate);
if (ret)
dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
clk_hw_get_name(hw), ret);
@@ -137,111 +162,128 @@
return ret;
}
-/*
- * Sadly there is no firmware rate rounding interface. We borrowed it from
- * clk-bcm2835.
- */
-static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
+static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
- pllb);
- u64 div, final_rate;
- u32 ndiv, fdiv;
-
- /* We can't use req->rate directly as it would overflow */
- final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
-
- div = (u64)final_rate << A2W_PLL_FRAC_BITS;
- do_div(div, req->best_parent_rate);
-
- ndiv = div >> A2W_PLL_FRAC_BITS;
- fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
-
- final_rate = ((u64)req->best_parent_rate *
- ((ndiv << A2W_PLL_FRAC_BITS) + fdiv));
-
- req->rate = final_rate >> A2W_PLL_FRAC_BITS;
-
+ /*
+ * The firmware will do the rounding but that isn't part of
+ * the interface with the firmware, so we just do our best
+ * here.
+ */
+ req->rate = clamp(req->rate, req->min_rate, req->max_rate);
return 0;
}
-static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- .is_prepared = raspberrypi_fw_pll_is_on,
- .recalc_rate = raspberrypi_fw_pll_get_rate,
- .set_rate = raspberrypi_fw_pll_set_rate,
- .determine_rate = raspberrypi_pll_determine_rate,
+static const struct clk_ops raspberrypi_firmware_clk_ops = {
+ .is_prepared = raspberrypi_fw_is_prepared,
+ .recalc_rate = raspberrypi_fw_get_rate,
+ .determine_rate = raspberrypi_fw_dumb_determine_rate,
+ .set_rate = raspberrypi_fw_set_rate,
};
-static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
+static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,
+ unsigned int parent,
+ unsigned int id)
{
- u32 min_rate = 0, max_rate = 0;
- struct clk_init_data init;
+ struct raspberrypi_clk_data *data;
+ struct clk_init_data init = {};
+ u32 min_rate, max_rate;
int ret;
- memset(&init, 0, sizeof(init));
+ data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+ data->rpi = rpi;
+ data->id = id;
- /* All of the PLLs derive from the external oscillator. */
- init.parent_names = (const char *[]){ "osc" };
- init.num_parents = 1;
- init.name = "pllb";
- init.ops = &raspberrypi_firmware_pll_clk_ops;
- init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
+ init.name = devm_kasprintf(rpi->dev, GFP_KERNEL,
+ "fw-clk-%s",
+ rpi_firmware_clk_names[id]);
+ init.ops = &raspberrypi_firmware_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
- /* Get min & max rates set by the firmware */
- ret = raspberrypi_clock_property(rpi->firmware,
+ data->hw.init = &init;
+
+ ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
- RPI_FIRMWARE_ARM_CLK_ID,
&min_rate);
if (ret) {
- dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
- init.name, ret);
- return ret;
+ dev_err(rpi->dev, "Failed to get clock %d min freq: %d",
+ id, ret);
+ return ERR_PTR(ret);
}
- ret = raspberrypi_clock_property(rpi->firmware,
+ ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
- RPI_FIRMWARE_ARM_CLK_ID,
&max_rate);
if (ret) {
- dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
- init.name, ret);
- return ret;
+ dev_err(rpi->dev, "Failed to get clock %d max freq: %d\n",
+ id, ret);
+ return ERR_PTR(ret);
}
- if (!min_rate || !max_rate) {
- dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
- min_rate, max_rate);
- return -EINVAL;
+ ret = devm_clk_hw_register(rpi->dev, &data->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk_hw_set_rate_range(&data->hw, min_rate, max_rate);
+
+ if (id == RPI_FIRMWARE_ARM_CLK_ID) {
+ ret = devm_clk_hw_register_clkdev(rpi->dev, &data->hw,
+ NULL, "cpu0");
+ if (ret) {
+ dev_err(rpi->dev, "Failed to initialize clkdev\n");
+ return ERR_PTR(ret);
+ }
}
- dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
- min_rate, max_rate);
-
- rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
- rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-
- rpi->pllb.init = &init;
-
- return devm_clk_hw_register(rpi->dev, &rpi->pllb);
+ return &data->hw;
}
-static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
-{
- rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev,
- "pllb_arm", "pllb",
- CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
- 1, 2);
- if (IS_ERR(rpi->pllb_arm)) {
- dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
- return PTR_ERR(rpi->pllb_arm);
- }
+struct rpi_firmware_get_clocks_response {
+ u32 parent;
+ u32 id;
+};
- rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0");
- if (!rpi->pllb_arm_lookup) {
- dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n");
- clk_hw_unregister_fixed_factor(rpi->pllb_arm);
+static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
+ struct clk_hw_onecell_data *data)
+{
+ struct rpi_firmware_get_clocks_response *clks;
+ int ret;
+
+ clks = devm_kcalloc(rpi->dev,
+ sizeof(*clks), RPI_FIRMWARE_NUM_CLK_ID,
+ GFP_KERNEL);
+ if (!clks)
return -ENOMEM;
+
+ ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS,
+ clks,
+ sizeof(*clks) * RPI_FIRMWARE_NUM_CLK_ID);
+ if (ret)
+ return ret;
+
+ while (clks->id) {
+ struct clk_hw *hw;
+
+ switch (clks->id) {
+ case RPI_FIRMWARE_ARM_CLK_ID:
+ case RPI_FIRMWARE_CORE_CLK_ID:
+ case RPI_FIRMWARE_M2MC_CLK_ID:
+ case RPI_FIRMWARE_V3D_CLK_ID:
+ hw = raspberrypi_clk_register(rpi, clks->parent,
+ clks->id);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ data->hws[clks->id] = hw;
+ data->num = clks->id + 1;
+ fallthrough;
+
+ default:
+ clks++;
+ break;
+ }
}
return 0;
@@ -249,14 +291,23 @@
static int raspberrypi_clk_probe(struct platform_device *pdev)
{
+ struct clk_hw_onecell_data *clk_data;
struct device_node *firmware_node;
struct device *dev = &pdev->dev;
struct rpi_firmware *firmware;
struct raspberrypi_clk *rpi;
int ret;
- firmware_node = of_find_compatible_node(NULL, NULL,
- "raspberrypi,bcm2835-firmware");
+ /*
+ * We can be probed either through the an old-fashioned
+ * platform device registration or through a DT node that is a
+ * child of the firmware node. Handle both cases.
+ */
+ if (dev->of_node)
+ firmware_node = of_get_parent(dev->of_node);
+ else
+ firmware_node = of_find_compatible_node(NULL, NULL,
+ "raspberrypi,bcm2835-firmware");
if (!firmware_node) {
dev_err(dev, "Missing firmware node\n");
return -ENOENT;
@@ -275,13 +326,18 @@
rpi->firmware = firmware;
platform_set_drvdata(pdev, rpi);
- ret = raspberrypi_register_pllb(rpi);
- if (ret) {
- dev_err(dev, "Failed to initialize pllb, %d\n", ret);
- return ret;
- }
+ clk_data = devm_kzalloc(dev, struct_size(clk_data, hws,
+ RPI_FIRMWARE_NUM_CLK_ID),
+ GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
- ret = raspberrypi_register_pllb_arm(rpi);
+ ret = raspberrypi_discover_clocks(rpi, clk_data);
+ if (ret)
+ return ret;
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ clk_data);
if (ret)
return ret;
@@ -300,9 +356,16 @@
return 0;
}
+static const struct of_device_id raspberrypi_clk_match[] = {
+ { .compatible = "raspberrypi,firmware-clocks" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, raspberrypi_clk_match);
+
static struct platform_driver raspberrypi_clk_driver = {
.driver = {
.name = "raspberrypi-clk",
+ .of_match_table = raspberrypi_clk_match,
},
.probe = raspberrypi_clk_probe,
.remove = raspberrypi_clk_remove,
diff --git a/drivers/clk/clk-cdce706.c b/drivers/clk/clk-cdce706.c
index 239102e..c91e909 100644
--- a/drivers/clk/clk-cdce706.c
+++ b/drivers/clk/clk-cdce706.c
@@ -4,7 +4,7 @@
*
* Copyright (c) 2014 Cadence Design Systems Inc.
*
- * Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+ * Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
*/
#include <linux/clk.h>
diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c
index 70397b4..38755a2 100644
--- a/drivers/clk/clk-gpio.c
+++ b/drivers/clk/clk-gpio.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - https://www.ti.com
*
* Authors:
* Jyri Sarha <jsarha@ti.com>
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index 71de361..1e1702e 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -7,9 +7,9 @@
*
* References:
* [1] "Si5351A/B/C Data Sheet"
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+ * https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
* [2] "Manually Generating an Si5351 Register Map"
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
+ * https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
*/
#include <linux/module.h>
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index fa96659..9a5fb38 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -24,6 +24,8 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <dt-bindings/clk/versaclock.h>
+
/* VersaClock5 registers */
#define VC5_OTP_CONTROL 0x00
@@ -89,6 +91,28 @@
/* Clock control register for clock 1,2 */
#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5
+#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
+
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33)
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25)
+
+#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3
+#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0
+#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
#define VC5_CLK_OE_SHDN 0x68
@@ -143,6 +167,8 @@
u32 div_int;
u32 div_frc;
unsigned int num;
+ unsigned int clk_output_cfg0;
+ unsigned int clk_output_cfg0_mask;
};
struct vc5_driver_data {
@@ -161,30 +187,6 @@
struct vc5_hw_data clk_out[VC5_MAX_CLK_OUT_NUM];
};
-static const char * const vc5_mux_names[] = {
- "mux"
-};
-
-static const char * const vc5_dbl_names[] = {
- "dbl"
-};
-
-static const char * const vc5_pfd_names[] = {
- "pfd"
-};
-
-static const char * const vc5_pll_names[] = {
- "pll"
-};
-
-static const char * const vc5_fod_names[] = {
- "fod0", "fod1", "fod2", "fod3",
-};
-
-static const char * const vc5_clk_out_names[] = {
- "out0_sel_i2cb", "out1", "out2", "out3", "out4",
-};
-
/*
* VersaClock5 i2c regmap
*/
@@ -591,6 +593,17 @@
regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+ if (hwdata->clk_output_cfg0_mask) {
+ dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n",
+ hwdata->num, hwdata->clk_output_cfg0_mask,
+ hwdata->clk_output_cfg0);
+
+ regmap_update_bits(vc5->regmap,
+ VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+ hwdata->clk_output_cfg0_mask,
+ hwdata->clk_output_cfg0);
+ }
+
return 0;
}
@@ -690,10 +703,123 @@
}
}
+static int vc5_update_mode(struct device_node *np_output,
+ struct vc5_hw_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output, "idt,mode", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
+ switch (value) {
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
+ clk_out->clk_output_cfg0 |=
+ value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_update_power(struct device_node *np_output,
+ struct vc5_hw_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output,
+ "idt,voltage-microvolts", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
+ switch (value) {
+ case 1800000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
+ break;
+ case 2500000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
+ break;
+ case 3300000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_update_slew(struct device_node *np_output,
+ struct vc5_hw_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
+ switch (value) {
+ case 80:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
+ break;
+ case 85:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
+ break;
+ case 90:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
+ break;
+ case 100:
+ clk_out->clk_output_cfg0 |=
+ VC5_CLK_OUTPUT_CFG0_SLEW_100;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_get_output_config(struct i2c_client *client,
+ struct vc5_hw_data *clk_out)
+{
+ struct device_node *np_output;
+ char *child_name;
+ int ret = 0;
+
+ child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1);
+ np_output = of_get_child_by_name(client->dev.of_node, child_name);
+ kfree(child_name);
+ if (!np_output)
+ goto output_done;
+
+ ret = vc5_update_mode(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_power(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_slew(np_output, clk_out);
+
+output_error:
+ if (ret) {
+ dev_err(&client->dev,
+ "Invalid clock output configuration OUT%d\n",
+ clk_out->num + 1);
+ }
+
+ of_node_put(np_output);
+
+output_done:
+ return ret;
+}
+
static const struct of_device_id clk_vc5_of_match[];
-static int vc5_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct vc5_driver_data *vc5;
struct clk_init_data init;
@@ -742,7 +868,7 @@
if (!IS_ERR(vc5->pin_clkin)) {
vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN;
parent_names[init.num_parents++] =
- __clk_get_name(vc5->pin_clkin);
+ __clk_get_name(vc5->pin_clkin);
}
if (!init.num_parents) {
@@ -750,12 +876,13 @@
return -EINVAL;
}
- init.name = vc5_mux_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node);
init.ops = &vc5_mux_ops;
init.flags = 0;
init.parent_names = parent_names;
vc5->clk_mux.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -764,13 +891,16 @@
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) {
/* Register frequency doubler */
memset(&init, 0, sizeof(init));
- init.name = vc5_dbl_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl",
+ client->dev.of_node);
init.ops = &vc5_dbl_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_mux_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_mul.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
@@ -780,16 +910,18 @@
/* Register PFD */
memset(&init, 0, sizeof(init));
- init.name = vc5_pfd_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node);
init.ops = &vc5_pfd_ops;
init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL)
- init.parent_names = vc5_dbl_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mul);
else
- init.parent_names = vc5_mux_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_pfd.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -797,15 +929,17 @@
/* Register PLL */
memset(&init, 0, sizeof(init));
- init.name = vc5_pll_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node);
init.ops = &vc5_pll_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_pfd_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pfd);
init.num_parents = 1;
vc5->clk_pll.num = 0;
vc5->clk_pll.vc5 = vc5;
vc5->clk_pll.hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -815,15 +949,18 @@
for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
idx = vc5_map_index_to_output(vc5->chip_info->model, n);
memset(&init, 0, sizeof(init));
- init.name = vc5_fod_names[idx];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d",
+ client->dev.of_node, idx);
init.ops = &vc5_fod_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_pll_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw);
init.num_parents = 1;
vc5->clk_fod[n].num = idx;
vc5->clk_fod[n].vc5 = vc5;
vc5->clk_fod[n].hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
@@ -833,32 +970,36 @@
/* Register MUX-connected OUT0_I2C_SELB output */
memset(&init, 0, sizeof(init));
- init.name = vc5_clk_out_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb",
+ client->dev.of_node);
init.ops = &vc5_clk_out_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_mux_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_out[0].num = idx;
vc5->clk_out[0].vc5 = vc5;
vc5->clk_out[0].hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
- dev_err(&client->dev, "unable to register %s\n",
- init.name);
+ dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
}
/* Register FOD-connected OUTx outputs */
for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
- parent_names[0] = vc5_fod_names[idx];
+ parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw);
if (n == 1)
- parent_names[1] = vc5_mux_names[0];
+ parent_names[1] = clk_hw_get_name(&vc5->clk_mux);
else
- parent_names[1] = vc5_clk_out_names[n - 1];
+ parent_names[1] =
+ clk_hw_get_name(&vc5->clk_out[n - 1].hw);
memset(&init, 0, sizeof(init));
- init.name = vc5_clk_out_names[idx + 1];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d",
+ client->dev.of_node, idx + 1);
init.ops = &vc5_clk_out_ops;
init.flags = CLK_SET_RATE_PARENT;
init.parent_names = parent_names;
@@ -866,13 +1007,18 @@
vc5->clk_out[n].num = idx;
vc5->clk_out[n].vc5 = vc5;
vc5->clk_out[n].hw.init = &init;
- ret = devm_clk_hw_register(&client->dev,
- &vc5->clk_out[n].hw);
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
goto err_clk;
}
+
+ /* Fetch Clock Output configuration from DT (if specified) */
+ ret = vc5_get_output_config(client, &vc5->clk_out[n]);
+ if (ret)
+ goto err_clk;
}
ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 3f588ed..236923b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1400,6 +1400,21 @@
}
EXPORT_SYMBOL_GPL(__clk_determine_rate);
+/**
+ * clk_hw_round_rate() - round the given rate for a hw clk
+ * @hw: the hw clk for which we are rounding a rate
+ * @rate: the rate which is to be rounded
+ *
+ * Takes in a rate as input and rounds it to a rate that the clk can actually
+ * use.
+ *
+ * Context: prepare_lock must be held.
+ * For clk providers to call from within clk_ops such as .round_rate,
+ * .determine_rate.
+ *
+ * Return: returns rounded rate of hw clk if clk supports round_rate operation
+ * else returns the parent rate.
+ */
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate)
{
int ret;
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 7edf8c8..2ad26cb 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -1,7 +1,7 @@
/*
* SCI Clock driver for keystone based devices
*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
index 8d7dbea..5b3d364 100644
--- a/drivers/clk/keystone/syscon-clk.c
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <linux/clk-provider.h>
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 30c1576..9803d44 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3981,6 +3981,113 @@
},
};
+/* Neural Network Accelerator source clock */
+
+static const struct clk_parent_data nna_clk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_gp0_pll.hw, },
+ { .hw = &g12a_hifi_pll.hw, },
+ { .hw = &g12a_fclk_div2p5.hw, },
+ { .hw = &g12a_fclk_div3.hw, },
+ { .hw = &g12a_fclk_div4.hw, },
+ { .hw = &g12a_fclk_div5.hw, },
+ { .hw = &g12a_fclk_div7.hw },
+};
+
+static struct clk_regmap sm1_nna_axi_clk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .mask = 7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_axi_clk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = nna_clk_parent_data,
+ .num_parents = ARRAY_SIZE(nna_clk_parent_data),
+ },
+};
+
+static struct clk_regmap sm1_nna_axi_clk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_axi_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_nna_axi_clk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sm1_nna_axi_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_axi_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_nna_axi_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sm1_nna_core_clk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .mask = 7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_core_clk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = nna_clk_parent_data,
+ .num_parents = ARRAY_SIZE(nna_clk_parent_data),
+ },
+};
+
+static struct clk_regmap sm1_nna_core_clk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_core_clk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_nna_core_clk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sm1_nna_core_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_NNA_CLK_CNTL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "nna_core_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_nna_core_clk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
#define MESON_GATE(_name, _reg, _bit) \
MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
@@ -4779,6 +4886,12 @@
[CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
[CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
[CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
+ [CLKID_NNA_AXI_CLK_SEL] = &sm1_nna_axi_clk_sel.hw,
+ [CLKID_NNA_AXI_CLK_DIV] = &sm1_nna_axi_clk_div.hw,
+ [CLKID_NNA_AXI_CLK] = &sm1_nna_axi_clk.hw,
+ [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
+ [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
+ [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -5020,6 +5133,12 @@
&g12a_spicc1_sclk_sel,
&g12a_spicc1_sclk_div,
&g12a_spicc1_sclk,
+ &sm1_nna_axi_clk_sel,
+ &sm1_nna_axi_clk_div,
+ &sm1_nna_axi_clk,
+ &sm1_nna_core_clk_sel,
+ &sm1_nna_core_clk_div,
+ &sm1_nna_core_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index a885255..69b6a69 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -70,6 +70,7 @@
#define HHI_MALI_CLK_CNTL 0x1b0
#define HHI_VPU_CLKC_CNTL 0x1b4
#define HHI_VPU_CLK_CNTL 0x1bC
+#define HHI_NNA_CLK_CNTL 0x1C8
#define HHI_HDMI_CLK_CNTL 0x1CC
#define HHI_VDEC_CLK_CNTL 0x1E0
#define HHI_VDEC2_CLK_CNTL 0x1E4
@@ -259,8 +260,12 @@
#define CLKID_SPICC0_SCLK_DIV 257
#define CLKID_SPICC1_SCLK_SEL 259
#define CLKID_SPICC1_SCLK_DIV 260
+#define CLKID_NNA_AXI_CLK_SEL 262
+#define CLKID_NNA_AXI_CLK_DIV 263
+#define CLKID_NNA_CORE_CLK_SEL 265
+#define CLKID_NNA_CORE_CLK_DIV 266
-#define NR_CLKS 262
+#define NR_CLKS 268
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index edc09d0..862f075 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -293,13 +293,6 @@
&meson8b_fclk_div2_div.hw
},
.num_parents = 1,
- /*
- * FIXME: Ethernet with a RGMII PHYs is not working if
- * fclk_div2 is disabled. it is currently unclear why this
- * is. keep it enabled until the Ethernet driver knows how
- * to manage this clock.
- */
- .flags = CLK_IS_CRITICAL,
},
};
@@ -1211,6 +1204,22 @@
},
};
+static struct clk_regmap meson8b_vclk_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VID_CLK_CNTL,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &meson8b_vclk_in_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
static struct clk_regmap meson8b_vclk_div1_gate = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VID_CLK_CNTL,
@@ -1220,7 +1229,7 @@
.name = "vclk_div1_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk_in_en.hw
+ &meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1234,7 +1243,7 @@
.name = "vclk_div2",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk_in_en.hw
+ &meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1264,7 +1273,7 @@
.name = "vclk_div4",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk_in_en.hw
+ &meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1294,7 +1303,7 @@
.name = "vclk_div6",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk_in_en.hw
+ &meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1324,7 +1333,7 @@
.name = "vclk_div12",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk_in_en.hw
+ &meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1378,6 +1387,22 @@
},
};
+static struct clk_regmap meson8b_vclk2_clk_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VIID_CLK_DIV,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vclk2_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &meson8b_vclk2_clk_in_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
static struct clk_regmap meson8b_vclk2_div1_gate = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VIID_CLK_DIV,
@@ -1387,7 +1412,7 @@
.name = "vclk2_div1_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk2_clk_in_en.hw
+ &meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1401,7 +1426,7 @@
.name = "vclk2_div2",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk2_clk_in_en.hw
+ &meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1431,7 +1456,7 @@
.name = "vclk2_div4",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk2_clk_in_en.hw
+ &meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1461,7 +1486,7 @@
.name = "vclk2_div6",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk2_clk_in_en.hw
+ &meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -1491,7 +1516,7 @@
.name = "vclk2_div12",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
- &meson8b_vclk2_clk_in_en.hw
+ &meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -2827,6 +2852,7 @@
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
+ [CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
@@ -2838,6 +2864,7 @@
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
+ [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
@@ -3032,6 +3059,7 @@
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
+ [CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
@@ -3043,6 +3071,7 @@
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
+ [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
@@ -3248,6 +3277,7 @@
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
+ [CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
@@ -3259,6 +3289,7 @@
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
+ [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
@@ -3450,6 +3481,7 @@
&meson8b_vid_pll_final_div,
&meson8b_vclk_in_sel,
&meson8b_vclk_in_en,
+ &meson8b_vclk_en,
&meson8b_vclk_div1_gate,
&meson8b_vclk_div2_div_gate,
&meson8b_vclk_div4_div_gate,
@@ -3457,6 +3489,7 @@
&meson8b_vclk_div12_div_gate,
&meson8b_vclk2_in_sel,
&meson8b_vclk2_clk_in_en,
+ &meson8b_vclk2_clk_en,
&meson8b_vclk2_div1_gate,
&meson8b_vclk2_div2_div_gate,
&meson8b_vclk2_div4_div_gate,
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index cd38ae2..b1a5074 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -17,7 +17,7 @@
* blocks below. Those offsets must be multiplied by 4 before adding them to
* the base address to get the right value
*
- * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
+ * [0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
#define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
#define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
@@ -180,8 +180,10 @@
#define CLKID_CTS_AMCLK_DIV 208
#define CLKID_CTS_MCLK_I958_SEL 210
#define CLKID_CTS_MCLK_I958_DIV 211
+#define CLKID_VCLK_EN 214
+#define CLKID_VCLK2_EN 215
-#define CLK_NR_CLKS 214
+#define CLK_NR_CLKS 216
/*
* include the CLKID and RESETID that have
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index cde6ca9..318c0ad 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -37,6 +37,15 @@
Say Y if you want to support CPU frequency scaling on devices
such as msm8916.
+config QCOM_CLK_APCC_MSM8996
+ tristate "MSM8996 CPU Clock Controller"
+ select QCOM_KRYO_L2_ACCESSORS
+ depends on ARM64
+ help
+ Support for the CPU clock controller on msm8996 devices.
+ Say Y if you want to support CPU clock scaling using CPUfreq
+ drivers for dyanmic power management.
+
config QCOM_CLK_RPM
tristate "RPM based Clock Controller"
depends on MFD_QCOM_RPM
@@ -89,6 +98,25 @@
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+config IPQ_APSS_PLL
+ tristate "IPQ APSS PLL"
+ help
+ Support for APSS PLL on ipq devices. The APSS PLL is the main
+ clock that feeds the CPUs on ipq based devices.
+ Say Y if you want to support CPU frequency scaling on ipq based
+ devices.
+
+config IPQ_APSS_6018
+ tristate "IPQ APSS Clock Controller"
+ select IPQ_APSS_PLL
+ depends on QCOM_APCS_IPC || COMPILE_TEST
+ help
+ Support for APSS clock controller on IPQ platforms. The
+ APSS clock controller manages the Mux and enable block that feeds the
+ CPUs.
+ Say Y if you want to support CPU frequency scaling on
+ ipq based devices.
+
config IPQ_GCC_4019
tristate "IPQ4019 Global Clock Controller"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7ec8561..ae0979b 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -19,6 +19,8 @@
# Keep alphabetically sorted by config
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
+obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
+obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
@@ -42,6 +44,7 @@
obj-$(CONFIG_MSM_MMCC_8998) += mmcc-msm8998.o
obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
+obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
new file mode 100644
index 0000000..30be87f
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-alpha-pll.h"
+
+static const u8 ipq_pll_offsets[] = {
+ [PLL_OFF_L_VAL] = 0x08,
+ [PLL_OFF_ALPHA_VAL] = 0x10,
+ [PLL_OFF_USER_CTL] = 0x18,
+ [PLL_OFF_CONFIG_CTL] = 0x20,
+ [PLL_OFF_CONFIG_CTL_U] = 0x24,
+ [PLL_OFF_STATUS] = 0x28,
+ [PLL_OFF_TEST_CTL] = 0x30,
+ [PLL_OFF_TEST_CTL_U] = 0x34,
+};
+
+static struct clk_alpha_pll ipq_pll = {
+ .offset = 0x0,
+ .regs = ipq_pll_offsets,
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "a53pll",
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+ },
+};
+
+static const struct alpha_pll_config ipq_pll_config = {
+ .l = 0x37,
+ .config_ctl_val = 0x04141200,
+ .config_ctl_hi_val = 0x0,
+ .early_output_mask = BIT(3),
+ .main_output_mask = BIT(0),
+};
+
+static const struct regmap_config ipq_pll_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x40,
+ .fast_io = true,
+};
+
+static int apss_ipq_pll_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &ipq_pll_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
+
+ ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
+ if (ret)
+ return ret;
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ &ipq_pll.clkr.hw);
+}
+
+static const struct of_device_id apss_ipq_pll_match_table[] = {
+ { .compatible = "qcom,ipq6018-a53pll" },
+ { }
+};
+
+static struct platform_driver apss_ipq_pll_driver = {
+ .probe = apss_ipq_pll_probe,
+ .driver = {
+ .name = "qcom-ipq-apss-pll",
+ .of_match_table = apss_ipq_pll_match_table,
+ },
+};
+module_platform_driver(apss_ipq_pll_driver);
+
+MODULE_DESCRIPTION("Qualcomm technology Inc APSS ALPHA PLL Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
new file mode 100644
index 0000000..d78ff2f
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "clk-alpha-pll.h"
+#include "clk-regmap-mux.h"
+
+enum {
+ P_XO,
+ P_APSS_PLL_EARLY,
+};
+
+static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
+ { .fw_name = "xo" },
+ { .fw_name = "pll" },
+};
+
+static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
+ { P_XO, 0 },
+ { P_APSS_PLL_EARLY, 5 },
+};
+
+static struct clk_regmap_mux apcs_alias0_clk_src = {
+ .reg = 0x0050,
+ .width = 3,
+ .shift = 7,
+ .parent_map = parents_apcs_alias0_clk_src_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "apcs_alias0_clk_src",
+ .parent_data = parents_apcs_alias0_clk_src,
+ .num_parents = 2,
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_branch apcs_alias0_core_clk = {
+ .halt_reg = 0x0058,
+ .clkr = {
+ .enable_reg = 0x0058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "apcs_alias0_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &apcs_alias0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static const struct regmap_config apss_ipq6018_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x1000,
+ .fast_io = true,
+};
+
+static struct clk_regmap *apss_ipq6018_clks[] = {
+ [APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
+ [APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
+};
+
+static const struct qcom_cc_desc apss_ipq6018_desc = {
+ .config = &apss_ipq6018_regmap_config,
+ .clks = apss_ipq6018_clks,
+ .num_clks = ARRAY_SIZE(apss_ipq6018_clks),
+};
+
+static int apss_ipq6018_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ return qcom_cc_really_probe(pdev, &apss_ipq6018_desc, regmap);
+}
+
+static struct platform_driver apss_ipq6018_driver = {
+ .probe = apss_ipq6018_probe,
+ .driver = {
+ .name = "qcom,apss-ipq6018-clk",
+ },
+};
+
+module_platform_driver(apss_ipq6018_driver);
+
+MODULE_DESCRIPTION("QCOM APSS IPQ 6018 CLK Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 704674a..1ba82be 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -47,6 +47,12 @@
u32 val;
};
+#define VCO(a, b, c) { \
+ .val = a,\
+ .min_freq = b,\
+ .max_freq = c,\
+}
+
/**
* struct clk_alpha_pll - phase locked loop (PLL)
* @offset: base address of registers
diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
new file mode 100644
index 0000000..4a4fde8
--- /dev/null
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * Each of the CPU clusters (Power and Perf) on msm8996 are
+ * clocked via 2 PLLs, a primary and alternate. There are also
+ * 2 Mux'es, a primary and secondary all connected together
+ * as shown below
+ *
+ * +-------+
+ * XO | |
+ * +------------------>0 |
+ * | |
+ * PLL/2 | SMUX +----+
+ * +------->1 | |
+ * | | | |
+ * | +-------+ | +-------+
+ * | +---->0 |
+ * | | |
+ * +---------------+ | +----------->1 | CPU clk
+ * |Primary PLL +----+ PLL_EARLY | | +------>
+ * | +------+-----------+ +------>2 PMUX |
+ * +---------------+ | | | |
+ * | +------+ | +-->3 |
+ * +--^+ ACD +-----+ | +-------+
+ * +---------------+ +------+ |
+ * |Alt PLL | |
+ * | +---------------------------+
+ * +---------------+ PLL_EARLY
+ *
+ * The primary PLL is what drives the CPU clk, except for times
+ * when we are reprogramming the PLL itself (for rate changes) when
+ * we temporarily switch to an alternate PLL.
+ *
+ * The primary PLL operates on a single VCO range, between 600MHz
+ * and 3GHz. However the CPUs do support OPPs with frequencies
+ * between 300MHz and 600MHz. In order to support running the CPUs
+ * at those frequencies we end up having to lock the PLL at twice
+ * the rate and drive the CPU clk via the PLL/2 output and SMUX.
+ *
+ * So for frequencies above 600MHz we follow the following path
+ * Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
+ * and for frequencies between 300MHz and 600MHz we follow
+ * Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk
+ *
+ * ACD stands for Adaptive Clock Distribution and is used to
+ * detect voltage droops.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <soc/qcom/kryo-l2-accessors.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-regmap.h"
+
+enum _pmux_input {
+ DIV_2_INDEX = 0,
+ PLL_INDEX,
+ ACD_INDEX,
+ ALT_INDEX,
+ NUM_OF_PMUX_INPUTS
+};
+
+#define DIV_2_THRESHOLD 600000000
+#define PWRCL_REG_OFFSET 0x0
+#define PERFCL_REG_OFFSET 0x80000
+#define MUX_OFFSET 0x40
+#define ALT_PLL_OFFSET 0x100
+#define SSSCTL_OFFSET 0x160
+
+static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_USER_CTL] = 0x10,
+ [PLL_OFF_CONFIG_CTL] = 0x18,
+ [PLL_OFF_CONFIG_CTL_U] = 0x1c,
+ [PLL_OFF_TEST_CTL] = 0x20,
+ [PLL_OFF_TEST_CTL_U] = 0x24,
+ [PLL_OFF_STATUS] = 0x28,
+};
+
+static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_ALPHA_VAL_U] = 0x0c,
+ [PLL_OFF_USER_CTL] = 0x10,
+ [PLL_OFF_USER_CTL_U] = 0x14,
+ [PLL_OFF_CONFIG_CTL] = 0x18,
+ [PLL_OFF_TEST_CTL] = 0x20,
+ [PLL_OFF_TEST_CTL_U] = 0x24,
+ [PLL_OFF_STATUS] = 0x28,
+};
+
+/* PLLs */
+
+static const struct alpha_pll_config hfpll_config = {
+ .l = 60,
+ .config_ctl_val = 0x200d4aa8,
+ .config_ctl_hi_val = 0x006,
+ .pre_div_mask = BIT(12),
+ .post_div_mask = 0x3 << 8,
+ .post_div_val = 0x1 << 8,
+ .main_output_mask = BIT(0),
+ .early_output_mask = BIT(3),
+};
+
+static struct clk_alpha_pll perfcl_pll = {
+ .offset = PERFCL_REG_OFFSET,
+ .regs = prim_pll_regs,
+ .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "perfcl_pll",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+};
+
+static struct clk_alpha_pll pwrcl_pll = {
+ .offset = PWRCL_REG_OFFSET,
+ .regs = prim_pll_regs,
+ .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pwrcl_pll",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+};
+
+static const struct pll_vco alt_pll_vco_modes[] = {
+ VCO(3, 250000000, 500000000),
+ VCO(2, 500000000, 750000000),
+ VCO(1, 750000000, 1000000000),
+ VCO(0, 1000000000, 2150400000),
+};
+
+static const struct alpha_pll_config altpll_config = {
+ .l = 16,
+ .vco_val = 0x3 << 20,
+ .vco_mask = 0x3 << 20,
+ .config_ctl_val = 0x4001051b,
+ .post_div_mask = 0x3 << 8,
+ .post_div_val = 0x1 << 8,
+ .main_output_mask = BIT(0),
+ .early_output_mask = BIT(3),
+};
+
+static struct clk_alpha_pll perfcl_alt_pll = {
+ .offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
+ .regs = alt_pll_regs,
+ .vco_table = alt_pll_vco_modes,
+ .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
+ .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "perfcl_alt_pll",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_hwfsm_ops,
+ },
+};
+
+static struct clk_alpha_pll pwrcl_alt_pll = {
+ .offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
+ .regs = alt_pll_regs,
+ .vco_table = alt_pll_vco_modes,
+ .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
+ .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "pwrcl_alt_pll",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_hwfsm_ops,
+ },
+};
+
+struct clk_cpu_8996_mux {
+ u32 reg;
+ u8 shift;
+ u8 width;
+ struct notifier_block nb;
+ struct clk_hw *pll;
+ struct clk_hw *pll_div_2;
+ struct clk_regmap clkr;
+};
+
+static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
+ void *data);
+
+#define to_clk_cpu_8996_mux_nb(_nb) \
+ container_of(_nb, struct clk_cpu_8996_mux, nb)
+
+static inline struct clk_cpu_8996_mux *to_clk_cpu_8996_mux_hw(struct clk_hw *hw)
+{
+ return container_of(to_clk_regmap(hw), struct clk_cpu_8996_mux, clkr);
+}
+
+static u8 clk_cpu_8996_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw);
+ u32 mask = GENMASK(cpuclk->width - 1, 0);
+ u32 val;
+
+ regmap_read(clkr->regmap, cpuclk->reg, &val);
+ val >>= cpuclk->shift;
+
+ return val & mask;
+}
+
+static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+ struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw);
+ u32 mask = GENMASK(cpuclk->width + cpuclk->shift - 1, cpuclk->shift);
+ u32 val;
+
+ val = index;
+ val <<= cpuclk->shift;
+
+ return regmap_update_bits(clkr->regmap, cpuclk->reg, mask, val);
+}
+
+static int clk_cpu_8996_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw);
+ struct clk_hw *parent = cpuclk->pll;
+
+ if (cpuclk->pll_div_2 && req->rate < DIV_2_THRESHOLD) {
+ if (req->rate < (DIV_2_THRESHOLD / 2))
+ return -EINVAL;
+
+ parent = cpuclk->pll_div_2;
+ }
+
+ req->best_parent_rate = clk_hw_round_rate(parent, req->rate);
+ req->best_parent_hw = parent;
+
+ return 0;
+}
+
+static const struct clk_ops clk_cpu_8996_mux_ops = {
+ .set_parent = clk_cpu_8996_mux_set_parent,
+ .get_parent = clk_cpu_8996_mux_get_parent,
+ .determine_rate = clk_cpu_8996_mux_determine_rate,
+};
+
+static struct clk_cpu_8996_mux pwrcl_smux = {
+ .reg = PWRCL_REG_OFFSET + MUX_OFFSET,
+ .shift = 2,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "pwrcl_smux",
+ .parent_names = (const char *[]){
+ "xo",
+ "pwrcl_pll_main",
+ },
+ .num_parents = 2,
+ .ops = &clk_cpu_8996_mux_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_cpu_8996_mux perfcl_smux = {
+ .reg = PERFCL_REG_OFFSET + MUX_OFFSET,
+ .shift = 2,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "perfcl_smux",
+ .parent_names = (const char *[]){
+ "xo",
+ "perfcl_pll_main",
+ },
+ .num_parents = 2,
+ .ops = &clk_cpu_8996_mux_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_cpu_8996_mux pwrcl_pmux = {
+ .reg = PWRCL_REG_OFFSET + MUX_OFFSET,
+ .shift = 0,
+ .width = 2,
+ .pll = &pwrcl_pll.clkr.hw,
+ .pll_div_2 = &pwrcl_smux.clkr.hw,
+ .nb.notifier_call = cpu_clk_notifier_cb,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "pwrcl_pmux",
+ .parent_names = (const char *[]){
+ "pwrcl_smux",
+ "pwrcl_pll",
+ "pwrcl_pll_acd",
+ "pwrcl_alt_pll",
+ },
+ .num_parents = 4,
+ .ops = &clk_cpu_8996_mux_ops,
+ /* CPU clock is critical and should never be gated */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_cpu_8996_mux perfcl_pmux = {
+ .reg = PERFCL_REG_OFFSET + MUX_OFFSET,
+ .shift = 0,
+ .width = 2,
+ .pll = &perfcl_pll.clkr.hw,
+ .pll_div_2 = &perfcl_smux.clkr.hw,
+ .nb.notifier_call = cpu_clk_notifier_cb,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "perfcl_pmux",
+ .parent_names = (const char *[]){
+ "perfcl_smux",
+ "perfcl_pll",
+ "perfcl_pll_acd",
+ "perfcl_alt_pll",
+ },
+ .num_parents = 4,
+ .ops = &clk_cpu_8996_mux_ops,
+ /* CPU clock is critical and should never be gated */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
+
+static const struct regmap_config cpu_msm8996_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x80210,
+ .fast_io = true,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static struct clk_regmap *cpu_msm8996_clks[] = {
+ &perfcl_pll.clkr,
+ &pwrcl_pll.clkr,
+ &perfcl_alt_pll.clkr,
+ &pwrcl_alt_pll.clkr,
+ &perfcl_smux.clkr,
+ &pwrcl_smux.clkr,
+ &perfcl_pmux.clkr,
+ &pwrcl_pmux.clkr,
+};
+
+static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
+ struct regmap *regmap)
+{
+ int i, ret;
+
+ perfcl_smux.pll = clk_hw_register_fixed_factor(dev, "perfcl_pll_main",
+ "perfcl_pll",
+ CLK_SET_RATE_PARENT,
+ 1, 2);
+ if (IS_ERR(perfcl_smux.pll)) {
+ dev_err(dev, "Failed to initialize perfcl_pll_main\n");
+ return PTR_ERR(perfcl_smux.pll);
+ }
+
+ pwrcl_smux.pll = clk_hw_register_fixed_factor(dev, "pwrcl_pll_main",
+ "pwrcl_pll",
+ CLK_SET_RATE_PARENT,
+ 1, 2);
+ if (IS_ERR(pwrcl_smux.pll)) {
+ dev_err(dev, "Failed to initialize pwrcl_pll_main\n");
+ clk_hw_unregister(perfcl_smux.pll);
+ return PTR_ERR(pwrcl_smux.pll);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cpu_msm8996_clks); i++) {
+ ret = devm_clk_register_regmap(dev, cpu_msm8996_clks[i]);
+ if (ret) {
+ clk_hw_unregister(perfcl_smux.pll);
+ clk_hw_unregister(pwrcl_smux.pll);
+ return ret;
+ }
+ }
+
+ clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
+ clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
+ clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
+ clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
+
+ /* Enable alt PLLs */
+ clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
+ clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
+
+ clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
+ clk_notifier_register(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
+
+ return ret;
+}
+
+static int qcom_cpu_clk_msm8996_unregister_clks(void)
+{
+ int ret = 0;
+
+ ret = clk_notifier_unregister(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
+ if (ret)
+ return ret;
+
+ ret = clk_notifier_unregister(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
+ if (ret)
+ return ret;
+
+ clk_hw_unregister(perfcl_smux.pll);
+ clk_hw_unregister(pwrcl_smux.pll);
+
+ return 0;
+}
+
+#define CPU_AFINITY_MASK 0xFFF
+#define PWRCL_CPU_REG_MASK 0x3
+#define PERFCL_CPU_REG_MASK 0x103
+
+#define L2ACDCR_REG 0x580ULL
+#define L2ACDTD_REG 0x581ULL
+#define L2ACDDVMRC_REG 0x584ULL
+#define L2ACDSSCR_REG 0x589ULL
+
+static DEFINE_SPINLOCK(qcom_clk_acd_lock);
+static void __iomem *base;
+
+static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
+{
+ u64 hwid;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qcom_clk_acd_lock, flags);
+
+ hwid = read_cpuid_mpidr() & CPU_AFINITY_MASK;
+
+ kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11);
+ kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000e0f0f);
+ kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601);
+
+ if (PWRCL_CPU_REG_MASK == (hwid | PWRCL_CPU_REG_MASK)) {
+ writel(0xf, base + PWRCL_REG_OFFSET + SSSCTL_OFFSET);
+ kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
+ }
+
+ if (PERFCL_CPU_REG_MASK == (hwid | PERFCL_CPU_REG_MASK)) {
+ kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
+ writel(0xf, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET);
+ }
+
+ spin_unlock_irqrestore(&qcom_clk_acd_lock, flags);
+}
+
+static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb);
+ struct clk_notifier_data *cnd = data;
+ int ret;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
+ qcom_cpu_clk_msm8996_acd_init(base);
+ break;
+ case POST_RATE_CHANGE:
+ if (cnd->new_rate < DIV_2_THRESHOLD)
+ ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw,
+ DIV_2_INDEX);
+ else
+ ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw,
+ ACD_INDEX);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+
+ return notifier_from_errno(ret);
+};
+
+static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct clk_hw_onecell_data *data;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ data = devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &cpu_msm8996_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = qcom_cpu_clk_msm8996_register_clks(dev, regmap);
+ if (ret)
+ return ret;
+
+ qcom_cpu_clk_msm8996_acd_init(base);
+
+ data->hws[0] = &pwrcl_pmux.clkr.hw;
+ data->hws[1] = &perfcl_pmux.clkr.hw;
+ data->num = 2;
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
+}
+
+static int qcom_cpu_clk_msm8996_driver_remove(struct platform_device *pdev)
+{
+ return qcom_cpu_clk_msm8996_unregister_clks();
+}
+
+static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = {
+ { .compatible = "qcom,msm8996-apcc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table);
+
+static struct platform_driver qcom_cpu_clk_msm8996_driver = {
+ .probe = qcom_cpu_clk_msm8996_driver_probe,
+ .remove = qcom_cpu_clk_msm8996_driver_remove,
+ .driver = {
+ .name = "qcom-msm8996-apcc",
+ .of_match_table = qcom_cpu_clk_msm8996_match_table,
+ },
+};
+module_platform_driver(qcom_cpu_clk_msm8996_driver);
+
+MODULE_DESCRIPTION("QCOM MSM8996 CPU Clock Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 52f63ad..0e1dfa8 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -452,6 +452,55 @@
.num_clks = ARRAY_SIZE(msm8916_clks),
};
+/* msm8936 */
+DEFINE_CLK_SMD_RPM(msm8936, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8936, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8936, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8936, sysmmnoc_clk, sysmmnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM_QDSS(msm8936, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk2_pin, bb_clk2_a_pin, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk2_pin, rf_clk2_a_pin, 5);
+
+static struct clk_smd_rpm *msm8936_clks[] = {
+ [RPM_SMD_PCNOC_CLK] = &msm8936_pcnoc_clk,
+ [RPM_SMD_PCNOC_A_CLK] = &msm8936_pcnoc_a_clk,
+ [RPM_SMD_SNOC_CLK] = &msm8936_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &msm8936_snoc_a_clk,
+ [RPM_SMD_BIMC_CLK] = &msm8936_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &msm8936_bimc_a_clk,
+ [RPM_SMD_SYSMMNOC_CLK] = &msm8936_sysmmnoc_clk,
+ [RPM_SMD_SYSMMNOC_A_CLK] = &msm8936_sysmmnoc_a_clk,
+ [RPM_SMD_QDSS_CLK] = &msm8936_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &msm8936_qdss_a_clk,
+ [RPM_SMD_BB_CLK1] = &msm8936_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &msm8936_bb_clk1_a,
+ [RPM_SMD_BB_CLK2] = &msm8936_bb_clk2,
+ [RPM_SMD_BB_CLK2_A] = &msm8936_bb_clk2_a,
+ [RPM_SMD_RF_CLK1] = &msm8936_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &msm8936_rf_clk1_a,
+ [RPM_SMD_RF_CLK2] = &msm8936_rf_clk2,
+ [RPM_SMD_RF_CLK2_A] = &msm8936_rf_clk2_a,
+ [RPM_SMD_BB_CLK1_PIN] = &msm8936_bb_clk1_pin,
+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8936_bb_clk1_a_pin,
+ [RPM_SMD_BB_CLK2_PIN] = &msm8936_bb_clk2_pin,
+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8936_bb_clk2_a_pin,
+ [RPM_SMD_RF_CLK1_PIN] = &msm8936_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8936_rf_clk1_a_pin,
+ [RPM_SMD_RF_CLK2_PIN] = &msm8936_rf_clk2_pin,
+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8936_rf_clk2_a_pin,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8936 = {
+ .clks = msm8936_clks,
+ .num_clks = ARRAY_SIZE(msm8936_clks),
+};
+
/* msm8974 */
DEFINE_CLK_SMD_RPM(msm8974, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
DEFINE_CLK_SMD_RPM(msm8974, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -574,6 +623,175 @@
.num_clks = ARRAY_SIZE(msm8976_clks),
};
+/* msm8992 */
+DEFINE_CLK_SMD_RPM(msm8992, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8992, ocmemgx_clk, ocmemgx_a_clk, QCOM_SMD_RPM_MEM_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8992, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8992, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8992, gfx3d_clk_src, gfx3d_a_clk_src, QCOM_SMD_RPM_MEM_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8992, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, bb_clk2_pin, bb_clk2_a_pin, 2);
+
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk1, div_clk1_a, 11);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk2, div_clk2_a, 12);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk3, div_clk3_a, 13);
+DEFINE_CLK_SMD_RPM(msm8992, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, ln_bb_clk, ln_bb_a_clk, 8);
+DEFINE_CLK_SMD_RPM(msm8992, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk,
+ QCOM_SMD_RPM_BUS_CLK, 3);
+DEFINE_CLK_SMD_RPM_QDSS(msm8992, qdss_clk, qdss_a_clk,
+ QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, rf_clk2_pin, rf_clk2_a_pin, 5);
+
+DEFINE_CLK_SMD_RPM(msm8992, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8992, ce2_clk, ce2_a_clk, QCOM_SMD_RPM_CE_CLK, 1);
+
+static struct clk_smd_rpm *msm8992_clks[] = {
+ [RPM_SMD_PNOC_CLK] = &msm8992_pnoc_clk,
+ [RPM_SMD_PNOC_A_CLK] = &msm8992_pnoc_a_clk,
+ [RPM_SMD_OCMEMGX_CLK] = &msm8992_ocmemgx_clk,
+ [RPM_SMD_OCMEMGX_A_CLK] = &msm8992_ocmemgx_a_clk,
+ [RPM_SMD_BIMC_CLK] = &msm8992_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &msm8992_bimc_a_clk,
+ [RPM_SMD_CNOC_CLK] = &msm8992_cnoc_clk,
+ [RPM_SMD_CNOC_A_CLK] = &msm8992_cnoc_a_clk,
+ [RPM_SMD_GFX3D_CLK_SRC] = &msm8992_gfx3d_clk_src,
+ [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8992_gfx3d_a_clk_src,
+ [RPM_SMD_SNOC_CLK] = &msm8992_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &msm8992_snoc_a_clk,
+ [RPM_SMD_BB_CLK1] = &msm8992_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &msm8992_bb_clk1_a,
+ [RPM_SMD_BB_CLK1_PIN] = &msm8992_bb_clk1_pin,
+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8992_bb_clk1_a_pin,
+ [RPM_SMD_BB_CLK2] = &msm8992_bb_clk2,
+ [RPM_SMD_BB_CLK2_A] = &msm8992_bb_clk2_a,
+ [RPM_SMD_BB_CLK2_PIN] = &msm8992_bb_clk2_pin,
+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8992_bb_clk2_a_pin,
+ [RPM_SMD_DIV_CLK1] = &msm8992_div_clk1,
+ [RPM_SMD_DIV_A_CLK1] = &msm8992_div_clk1_a,
+ [RPM_SMD_DIV_CLK2] = &msm8992_div_clk2,
+ [RPM_SMD_DIV_A_CLK2] = &msm8992_div_clk2_a,
+ [RPM_SMD_DIV_CLK3] = &msm8992_div_clk3,
+ [RPM_SMD_DIV_A_CLK3] = &msm8992_div_clk3_a,
+ [RPM_SMD_IPA_CLK] = &msm8992_ipa_clk,
+ [RPM_SMD_IPA_A_CLK] = &msm8992_ipa_a_clk,
+ [RPM_SMD_LN_BB_CLK] = &msm8992_ln_bb_clk,
+ [RPM_SMD_LN_BB_A_CLK] = &msm8992_ln_bb_a_clk,
+ [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8992_mmssnoc_ahb_clk,
+ [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8992_mmssnoc_ahb_a_clk,
+ [RPM_SMD_QDSS_CLK] = &msm8992_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &msm8992_qdss_a_clk,
+ [RPM_SMD_RF_CLK1] = &msm8992_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &msm8992_rf_clk1_a,
+ [RPM_SMD_RF_CLK2] = &msm8992_rf_clk2,
+ [RPM_SMD_RF_CLK2_A] = &msm8992_rf_clk2_a,
+ [RPM_SMD_RF_CLK1_PIN] = &msm8992_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8992_rf_clk1_a_pin,
+ [RPM_SMD_RF_CLK2_PIN] = &msm8992_rf_clk2_pin,
+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8992_rf_clk2_a_pin,
+ [RPM_SMD_CE1_CLK] = &msm8992_ce1_clk,
+ [RPM_SMD_CE1_A_CLK] = &msm8992_ce1_a_clk,
+ [RPM_SMD_CE2_CLK] = &msm8992_ce2_clk,
+ [RPM_SMD_CE2_A_CLK] = &msm8992_ce2_a_clk,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8992 = {
+ .clks = msm8992_clks,
+ .num_clks = ARRAY_SIZE(msm8992_clks),
+};
+
+/* msm8994 */
+DEFINE_CLK_SMD_RPM(msm8994, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8994, ocmemgx_clk, ocmemgx_a_clk, QCOM_SMD_RPM_MEM_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8994, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8994, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8994, gfx3d_clk_src, gfx3d_a_clk_src, QCOM_SMD_RPM_MEM_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8994, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, bb_clk2_pin, bb_clk2_a_pin, 2);
+
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk1, div_clk1_a, 11);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk2, div_clk2_a, 12);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk3, div_clk3_a, 13);
+DEFINE_CLK_SMD_RPM(msm8994, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, ln_bb_clk, ln_bb_a_clk, 8);
+DEFINE_CLK_SMD_RPM(msm8994, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk,
+ QCOM_SMD_RPM_BUS_CLK, 3);
+DEFINE_CLK_SMD_RPM_QDSS(msm8994, qdss_clk, qdss_a_clk,
+ QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, rf_clk2_pin, rf_clk2_a_pin, 5);
+
+DEFINE_CLK_SMD_RPM(msm8994, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8994, ce2_clk, ce2_a_clk, QCOM_SMD_RPM_CE_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8994, ce3_clk, ce3_a_clk, QCOM_SMD_RPM_CE_CLK, 2);
+
+static struct clk_smd_rpm *msm8994_clks[] = {
+ [RPM_SMD_PNOC_CLK] = &msm8994_pnoc_clk,
+ [RPM_SMD_PNOC_A_CLK] = &msm8994_pnoc_a_clk,
+ [RPM_SMD_OCMEMGX_CLK] = &msm8994_ocmemgx_clk,
+ [RPM_SMD_OCMEMGX_A_CLK] = &msm8994_ocmemgx_a_clk,
+ [RPM_SMD_BIMC_CLK] = &msm8994_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &msm8994_bimc_a_clk,
+ [RPM_SMD_CNOC_CLK] = &msm8994_cnoc_clk,
+ [RPM_SMD_CNOC_A_CLK] = &msm8994_cnoc_a_clk,
+ [RPM_SMD_GFX3D_CLK_SRC] = &msm8994_gfx3d_clk_src,
+ [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8994_gfx3d_a_clk_src,
+ [RPM_SMD_SNOC_CLK] = &msm8994_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &msm8994_snoc_a_clk,
+ [RPM_SMD_BB_CLK1] = &msm8994_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &msm8994_bb_clk1_a,
+ [RPM_SMD_BB_CLK1_PIN] = &msm8994_bb_clk1_pin,
+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8994_bb_clk1_a_pin,
+ [RPM_SMD_BB_CLK2] = &msm8994_bb_clk2,
+ [RPM_SMD_BB_CLK2_A] = &msm8994_bb_clk2_a,
+ [RPM_SMD_BB_CLK2_PIN] = &msm8994_bb_clk2_pin,
+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8994_bb_clk2_a_pin,
+ [RPM_SMD_DIV_CLK1] = &msm8994_div_clk1,
+ [RPM_SMD_DIV_A_CLK1] = &msm8994_div_clk1_a,
+ [RPM_SMD_DIV_CLK2] = &msm8994_div_clk2,
+ [RPM_SMD_DIV_A_CLK2] = &msm8994_div_clk2_a,
+ [RPM_SMD_DIV_CLK3] = &msm8994_div_clk3,
+ [RPM_SMD_DIV_A_CLK3] = &msm8994_div_clk3_a,
+ [RPM_SMD_IPA_CLK] = &msm8994_ipa_clk,
+ [RPM_SMD_IPA_A_CLK] = &msm8994_ipa_a_clk,
+ [RPM_SMD_LN_BB_CLK] = &msm8994_ln_bb_clk,
+ [RPM_SMD_LN_BB_A_CLK] = &msm8994_ln_bb_a_clk,
+ [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8994_mmssnoc_ahb_clk,
+ [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8994_mmssnoc_ahb_a_clk,
+ [RPM_SMD_QDSS_CLK] = &msm8994_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &msm8994_qdss_a_clk,
+ [RPM_SMD_RF_CLK1] = &msm8994_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &msm8994_rf_clk1_a,
+ [RPM_SMD_RF_CLK2] = &msm8994_rf_clk2,
+ [RPM_SMD_RF_CLK2_A] = &msm8994_rf_clk2_a,
+ [RPM_SMD_RF_CLK1_PIN] = &msm8994_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8994_rf_clk1_a_pin,
+ [RPM_SMD_RF_CLK2_PIN] = &msm8994_rf_clk2_pin,
+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8994_rf_clk2_a_pin,
+ [RPM_SMD_CE1_CLK] = &msm8994_ce1_clk,
+ [RPM_SMD_CE1_A_CLK] = &msm8994_ce1_a_clk,
+ [RPM_SMD_CE2_CLK] = &msm8994_ce2_clk,
+ [RPM_SMD_CE2_A_CLK] = &msm8994_ce2_a_clk,
+ [RPM_SMD_CE3_CLK] = &msm8994_ce3_clk,
+ [RPM_SMD_CE3_A_CLK] = &msm8994_ce3_a_clk,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8994 = {
+ .clks = msm8994_clks,
+ .num_clks = ARRAY_SIZE(msm8994_clks),
+};
+
/* msm8996 */
DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -766,13 +984,92 @@
.num_clks = ARRAY_SIZE(msm8998_clks),
};
+/* sdm660 */
+DEFINE_CLK_SMD_RPM_BRANCH(sdm660, bi_tcxo, bi_tcxo_a, QCOM_SMD_RPM_MISC_CLK, 0,
+ 19200000);
+DEFINE_CLK_SMD_RPM(sdm660, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(sdm660, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(sdm660, cnoc_periph_clk, cnoc_periph_a_clk,
+ QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, mmssnoc_axi_clk, mmssnoc_axi_a_clk,
+ QCOM_SMD_RPM_MMAXI_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, aggre2_noc_clk, aggre2_noc_a_clk,
+ QCOM_SMD_RPM_AGGR_CLK, 2);
+DEFINE_CLK_SMD_RPM_QDSS(sdm660, qdss_clk, qdss_a_clk,
+ QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, div_clk1, div_clk1_a, 11);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk1, ln_bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk2, ln_bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk3, ln_bb_clk3_a, 3);
+
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk1_pin,
+ ln_bb_clk1_pin_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk2_pin,
+ ln_bb_clk2_pin_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk3_pin,
+ ln_bb_clk3_pin_a, 3);
+static struct clk_smd_rpm *sdm660_clks[] = {
+ [RPM_SMD_XO_CLK_SRC] = &sdm660_bi_tcxo,
+ [RPM_SMD_XO_A_CLK_SRC] = &sdm660_bi_tcxo_a,
+ [RPM_SMD_SNOC_CLK] = &sdm660_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &sdm660_snoc_a_clk,
+ [RPM_SMD_CNOC_CLK] = &sdm660_cnoc_clk,
+ [RPM_SMD_CNOC_A_CLK] = &sdm660_cnoc_a_clk,
+ [RPM_SMD_CNOC_PERIPH_CLK] = &sdm660_cnoc_periph_clk,
+ [RPM_SMD_CNOC_PERIPH_A_CLK] = &sdm660_cnoc_periph_a_clk,
+ [RPM_SMD_BIMC_CLK] = &sdm660_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &sdm660_bimc_a_clk,
+ [RPM_SMD_MMSSNOC_AXI_CLK] = &sdm660_mmssnoc_axi_clk,
+ [RPM_SMD_MMSSNOC_AXI_CLK_A] = &sdm660_mmssnoc_axi_a_clk,
+ [RPM_SMD_IPA_CLK] = &sdm660_ipa_clk,
+ [RPM_SMD_IPA_A_CLK] = &sdm660_ipa_a_clk,
+ [RPM_SMD_CE1_CLK] = &sdm660_ce1_clk,
+ [RPM_SMD_CE1_A_CLK] = &sdm660_ce1_a_clk,
+ [RPM_SMD_AGGR2_NOC_CLK] = &sdm660_aggre2_noc_clk,
+ [RPM_SMD_AGGR2_NOC_A_CLK] = &sdm660_aggre2_noc_a_clk,
+ [RPM_SMD_QDSS_CLK] = &sdm660_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &sdm660_qdss_a_clk,
+ [RPM_SMD_RF_CLK1] = &sdm660_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &sdm660_rf_clk1_a,
+ [RPM_SMD_DIV_CLK1] = &sdm660_div_clk1,
+ [RPM_SMD_DIV_A_CLK1] = &sdm660_div_clk1_a,
+ [RPM_SMD_LN_BB_CLK] = &sdm660_ln_bb_clk1,
+ [RPM_SMD_LN_BB_A_CLK] = &sdm660_ln_bb_clk1_a,
+ [RPM_SMD_LN_BB_CLK2] = &sdm660_ln_bb_clk2,
+ [RPM_SMD_LN_BB_CLK2_A] = &sdm660_ln_bb_clk2_a,
+ [RPM_SMD_LN_BB_CLK3] = &sdm660_ln_bb_clk3,
+ [RPM_SMD_LN_BB_CLK3_A] = &sdm660_ln_bb_clk3_a,
+ [RPM_SMD_RF_CLK1_PIN] = &sdm660_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &sdm660_rf_clk1_a_pin,
+ [RPM_SMD_LN_BB_CLK1_PIN] = &sdm660_ln_bb_clk1_pin,
+ [RPM_SMD_LN_BB_CLK1_A_PIN] = &sdm660_ln_bb_clk1_pin_a,
+ [RPM_SMD_LN_BB_CLK2_PIN] = &sdm660_ln_bb_clk2_pin,
+ [RPM_SMD_LN_BB_CLK2_A_PIN] = &sdm660_ln_bb_clk2_pin_a,
+ [RPM_SMD_LN_BB_CLK3_PIN] = &sdm660_ln_bb_clk3_pin,
+ [RPM_SMD_LN_BB_CLK3_A_PIN] = &sdm660_ln_bb_clk3_pin_a,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_sdm660 = {
+ .clks = sdm660_clks,
+ .num_clks = ARRAY_SIZE(sdm660_clks),
+};
+
static const struct of_device_id rpm_smd_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
+ { .compatible = "qcom,rpmcc-msm8936", .data = &rpm_clk_msm8936 },
{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
+ { .compatible = "qcom,rpmcc-msm8992", .data = &rpm_clk_msm8992 },
+ { .compatible = "qcom,rpmcc-msm8994", .data = &rpm_clk_msm8994 },
{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
{ .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
{ .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
+ { .compatible = "qcom,rpmcc-sdm660", .data = &rpm_clk_sdm660 },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a8456e0..d6b7adb 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3089,7 +3089,7 @@
regmap_write(regmap, 0x3cf8, 8);
regmap_write(regmap, 0x3d18, 8);
- return 0;
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
}
static struct platform_driver gcc_ipq806x_driver = {
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index e01f5f5..ef2c9c4c 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -4316,6 +4316,62 @@
},
};
+static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0, 8, 0, 0),
+ { }
+};
+
+struct clk_rcg2 pcie0_rchng_clk_src = {
+ .cmd_rcgr = 0x75070,
+ .freq_tbl = ftbl_pcie_rchng_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pcie0_rchng_clk_src",
+ .parent_hws = (const struct clk_hw *[]) {
+ &gpll0.clkr.hw },
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_pcie0_rchng_clk = {
+ .halt_reg = 0x75070,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x75070,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie0_rchng_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &pcie0_rchng_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie0_axi_s_bridge_clk = {
+ .halt_reg = 0x75048,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x75048,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie0_axi_s_bridge_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &pcie0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
&gpll6_out_main_div2.hw,
@@ -4551,6 +4607,9 @@
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+ [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr,
+ [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr,
+ [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq8074_resets[] = {
@@ -4678,6 +4737,7 @@
[GCC_PCIE0_AXI_SLAVE_ARES] = { 0x75040, 4 },
[GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
[GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
+ [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
[GCC_PCIE1_PIPE_ARES] = { 0x76040, 0 },
[GCC_PCIE1_SLEEP_ARES] = { 0x76040, 1 },
[GCC_PCIE1_CORE_STICKY_ARES] = { 0x76040, 2 },
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index ca4383e..538677b 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1061,7 +1061,7 @@
.hw = &gpll0.clkr.hw,
},
.num_parents = 1,
- .ops = &clk_branch2_ops,
+ .ops = &clk_branch2_aon_ops,
},
},
};
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index f6ce888..90f7feb 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved.
*/
#include <linux/kernel.h>
@@ -1344,7 +1344,7 @@
"gpll0",
},
.num_parents = 1,
- .ops = &clk_branch2_ops,
+ .ops = &clk_branch2_aon_ops,
},
},
};
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 9eb79bf..28e8730 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -15,6 +15,7 @@
select CLK_R8A774A1 if ARCH_R8A774A1
select CLK_R8A774B1 if ARCH_R8A774B1
select CLK_R8A774C0 if ARCH_R8A774C0
+ select CLK_R8A774E1 if ARCH_R8A774E1
select CLK_R8A7778 if ARCH_R8A7778
select CLK_R8A7779 if ARCH_R8A7779
select CLK_R8A7790 if ARCH_R8A7790
@@ -84,6 +85,10 @@
bool "RZ/G2E clock support" if COMPILE_TEST
select CLK_RCAR_GEN3_CPG
+config CLK_R8A774E1
+ bool "RZ/G2H clock support" if COMPILE_TEST
+ select CLK_RCAR_GEN3_CPG
+
config CLK_R8A7778
bool "R-Car M1A clock support" if COMPILE_TEST
select CLK_RENESAS_CPG_MSTP
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index a4066f9..c7c03ab 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_CLK_R8A774A1) += r8a774a1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774B1) += r8a774b1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774C0) += r8a774c0-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A774E1) += r8a774e1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_CLK_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_CLK_R8A7790) += r8a7790-cpg-mssr.o
diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
index e05bfa2..fd54b9f 100644
--- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
@@ -237,6 +237,7 @@
};
static const unsigned int r8a774a1_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
diff --git a/drivers/clk/renesas/r8a774b1-cpg-mssr.c b/drivers/clk/renesas/r8a774b1-cpg-mssr.c
index c9af7091..f436691 100644
--- a/drivers/clk/renesas/r8a774b1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774b1-cpg-mssr.c
@@ -233,6 +233,7 @@
};
static const unsigned int r8a774b1_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
diff --git a/drivers/clk/renesas/r8a774c0-cpg-mssr.c b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
index f91e7a4..9fc9fa9 100644
--- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
@@ -238,6 +238,7 @@
};
static const unsigned int r8a774c0_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
diff --git a/drivers/clk/renesas/r8a774e1-cpg-mssr.c b/drivers/clk/renesas/r8a774e1-cpg-mssr.c
new file mode 100644
index 0000000..b96c486
--- /dev/null
+++ b/drivers/clk/renesas/r8a774e1-cpg-mssr.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r8a774e1 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A774E1_CLK_CANFD,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_EXTALR,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL2,
+ CLK_PLL3,
+ CLK_PLL4,
+ CLK_PLL1_DIV2,
+ CLK_PLL1_DIV4,
+ CLK_S0,
+ CLK_S1,
+ CLK_S2,
+ CLK_S3,
+ CLK_SDSRC,
+ CLK_RPCSRC,
+ CLK_RINT,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a774e1_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("extalr", CLK_EXTALR),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+ DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+ DEF_BASE(".pll4", CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+ DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED(".s0", CLK_S0, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1),
+ DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
+ DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
+ DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1),
+ DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+ DEF_BASE("rpc", R8A774E1_CLK_RPC, CLK_TYPE_GEN3_RPC,
+ CLK_RPCSRC),
+ DEF_BASE("rpcd2", R8A774E1_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+ R8A774E1_CLK_RPC),
+
+ DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32),
+
+ /* Core Clock Outputs */
+ DEF_GEN3_Z("z", R8A774E1_CLK_Z, CLK_TYPE_GEN3_Z, CLK_PLL0, 2, 8),
+ DEF_GEN3_Z("z2", R8A774E1_CLK_Z2, CLK_TYPE_GEN3_Z, CLK_PLL2, 2, 0),
+ DEF_FIXED("ztr", R8A774E1_CLK_ZTR, CLK_PLL1_DIV2, 6, 1),
+ DEF_FIXED("ztrd2", R8A774E1_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+ DEF_FIXED("zt", R8A774E1_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
+ DEF_FIXED("zx", R8A774E1_CLK_ZX, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED("s0d1", R8A774E1_CLK_S0D1, CLK_S0, 1, 1),
+ DEF_FIXED("s0d2", R8A774E1_CLK_S0D2, CLK_S0, 2, 1),
+ DEF_FIXED("s0d3", R8A774E1_CLK_S0D3, CLK_S0, 3, 1),
+ DEF_FIXED("s0d4", R8A774E1_CLK_S0D4, CLK_S0, 4, 1),
+ DEF_FIXED("s0d6", R8A774E1_CLK_S0D6, CLK_S0, 6, 1),
+ DEF_FIXED("s0d8", R8A774E1_CLK_S0D8, CLK_S0, 8, 1),
+ DEF_FIXED("s0d12", R8A774E1_CLK_S0D12, CLK_S0, 12, 1),
+ DEF_FIXED("s1d2", R8A774E1_CLK_S1D2, CLK_S1, 2, 1),
+ DEF_FIXED("s1d4", R8A774E1_CLK_S1D4, CLK_S1, 4, 1),
+ DEF_FIXED("s2d1", R8A774E1_CLK_S2D1, CLK_S2, 1, 1),
+ DEF_FIXED("s2d2", R8A774E1_CLK_S2D2, CLK_S2, 2, 1),
+ DEF_FIXED("s2d4", R8A774E1_CLK_S2D4, CLK_S2, 4, 1),
+ DEF_FIXED("s3d1", R8A774E1_CLK_S3D1, CLK_S3, 1, 1),
+ DEF_FIXED("s3d2", R8A774E1_CLK_S3D2, CLK_S3, 2, 1),
+ DEF_FIXED("s3d4", R8A774E1_CLK_S3D4, CLK_S3, 4, 1),
+
+ DEF_GEN3_SD("sd0", R8A774E1_CLK_SD0, CLK_SDSRC, 0x074),
+ DEF_GEN3_SD("sd1", R8A774E1_CLK_SD1, CLK_SDSRC, 0x078),
+ DEF_GEN3_SD("sd2", R8A774E1_CLK_SD2, CLK_SDSRC, 0x268),
+ DEF_GEN3_SD("sd3", R8A774E1_CLK_SD3, CLK_SDSRC, 0x26c),
+
+ DEF_FIXED("cl", R8A774E1_CLK_CL, CLK_PLL1_DIV2, 48, 1),
+ DEF_FIXED("cr", R8A774E1_CLK_CR, CLK_PLL1_DIV4, 2, 1),
+ DEF_FIXED("cp", R8A774E1_CLK_CP, CLK_EXTAL, 2, 1),
+ DEF_FIXED("cpex", R8A774E1_CLK_CPEX, CLK_EXTAL, 2, 1),
+
+ DEF_DIV6P1("canfd", R8A774E1_CLK_CANFD, CLK_PLL1_DIV4, 0x244),
+ DEF_DIV6P1("csi0", R8A774E1_CLK_CSI0, CLK_PLL1_DIV4, 0x00c),
+ DEF_DIV6P1("mso", R8A774E1_CLK_MSO, CLK_PLL1_DIV4, 0x014),
+ DEF_DIV6P1("hdmi", R8A774E1_CLK_HDMI, CLK_PLL1_DIV4, 0x250),
+
+ DEF_GEN3_OSC("osc", R8A774E1_CLK_OSC, CLK_EXTAL, 8),
+
+ DEF_BASE("r", R8A774E1_CLK_R, CLK_TYPE_GEN3_R, CLK_RINT),
+};
+
+static const struct mssr_mod_clk r8a774e1_mod_clks[] __initconst = {
+ DEF_MOD("fdp1-1", 118, R8A774E1_CLK_S0D1),
+ DEF_MOD("fdp1-0", 119, R8A774E1_CLK_S0D1),
+ DEF_MOD("tmu4", 121, R8A774E1_CLK_S0D6),
+ DEF_MOD("tmu3", 122, R8A774E1_CLK_S3D2),
+ DEF_MOD("tmu2", 123, R8A774E1_CLK_S3D2),
+ DEF_MOD("tmu1", 124, R8A774E1_CLK_S3D2),
+ DEF_MOD("tmu0", 125, R8A774E1_CLK_CP),
+ DEF_MOD("vcplf", 130, R8A774E1_CLK_S2D1),
+ DEF_MOD("vdpb", 131, R8A774E1_CLK_S2D1),
+ DEF_MOD("scif5", 202, R8A774E1_CLK_S3D4),
+ DEF_MOD("scif4", 203, R8A774E1_CLK_S3D4),
+ DEF_MOD("scif3", 204, R8A774E1_CLK_S3D4),
+ DEF_MOD("scif1", 206, R8A774E1_CLK_S3D4),
+ DEF_MOD("scif0", 207, R8A774E1_CLK_S3D4),
+ DEF_MOD("msiof3", 208, R8A774E1_CLK_MSO),
+ DEF_MOD("msiof2", 209, R8A774E1_CLK_MSO),
+ DEF_MOD("msiof1", 210, R8A774E1_CLK_MSO),
+ DEF_MOD("msiof0", 211, R8A774E1_CLK_MSO),
+ DEF_MOD("sys-dmac2", 217, R8A774E1_CLK_S3D1),
+ DEF_MOD("sys-dmac1", 218, R8A774E1_CLK_S3D1),
+ DEF_MOD("sys-dmac0", 219, R8A774E1_CLK_S0D3),
+ DEF_MOD("cmt3", 300, R8A774E1_CLK_R),
+ DEF_MOD("cmt2", 301, R8A774E1_CLK_R),
+ DEF_MOD("cmt1", 302, R8A774E1_CLK_R),
+ DEF_MOD("cmt0", 303, R8A774E1_CLK_R),
+ DEF_MOD("tpu0", 304, R8A774E1_CLK_S3D4),
+ DEF_MOD("scif2", 310, R8A774E1_CLK_S3D4),
+ DEF_MOD("sdif3", 311, R8A774E1_CLK_SD3),
+ DEF_MOD("sdif2", 312, R8A774E1_CLK_SD2),
+ DEF_MOD("sdif1", 313, R8A774E1_CLK_SD1),
+ DEF_MOD("sdif0", 314, R8A774E1_CLK_SD0),
+ DEF_MOD("pcie1", 318, R8A774E1_CLK_S3D1),
+ DEF_MOD("pcie0", 319, R8A774E1_CLK_S3D1),
+ DEF_MOD("usb3-if0", 328, R8A774E1_CLK_S3D1),
+ DEF_MOD("usb-dmac0", 330, R8A774E1_CLK_S3D1),
+ DEF_MOD("usb-dmac1", 331, R8A774E1_CLK_S3D1),
+ DEF_MOD("rwdt", 402, R8A774E1_CLK_R),
+ DEF_MOD("intc-ex", 407, R8A774E1_CLK_CP),
+ DEF_MOD("intc-ap", 408, R8A774E1_CLK_S0D3),
+ DEF_MOD("audmac1", 501, R8A774E1_CLK_S1D2),
+ DEF_MOD("audmac0", 502, R8A774E1_CLK_S1D2),
+ DEF_MOD("hscif4", 516, R8A774E1_CLK_S3D1),
+ DEF_MOD("hscif3", 517, R8A774E1_CLK_S3D1),
+ DEF_MOD("hscif2", 518, R8A774E1_CLK_S3D1),
+ DEF_MOD("hscif1", 519, R8A774E1_CLK_S3D1),
+ DEF_MOD("hscif0", 520, R8A774E1_CLK_S3D1),
+ DEF_MOD("thermal", 522, R8A774E1_CLK_CP),
+ DEF_MOD("pwm", 523, R8A774E1_CLK_S0D12),
+ DEF_MOD("fcpvd1", 602, R8A774E1_CLK_S0D2),
+ DEF_MOD("fcpvd0", 603, R8A774E1_CLK_S0D2),
+ DEF_MOD("fcpvb1", 606, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpvb0", 607, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpvi1", 610, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpvi0", 611, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpf1", 614, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpf0", 615, R8A774E1_CLK_S0D1),
+ DEF_MOD("fcpcs", 619, R8A774E1_CLK_S0D1),
+ DEF_MOD("vspd1", 622, R8A774E1_CLK_S0D2),
+ DEF_MOD("vspd0", 623, R8A774E1_CLK_S0D2),
+ DEF_MOD("vspbc", 624, R8A774E1_CLK_S0D1),
+ DEF_MOD("vspbd", 626, R8A774E1_CLK_S0D1),
+ DEF_MOD("vspi1", 630, R8A774E1_CLK_S0D1),
+ DEF_MOD("vspi0", 631, R8A774E1_CLK_S0D1),
+ DEF_MOD("ehci1", 702, R8A774E1_CLK_S3D2),
+ DEF_MOD("ehci0", 703, R8A774E1_CLK_S3D2),
+ DEF_MOD("hsusb", 704, R8A774E1_CLK_S3D2),
+ DEF_MOD("csi20", 714, R8A774E1_CLK_CSI0),
+ DEF_MOD("csi40", 716, R8A774E1_CLK_CSI0),
+ DEF_MOD("du3", 721, R8A774E1_CLK_S2D1),
+ DEF_MOD("du1", 723, R8A774E1_CLK_S2D1),
+ DEF_MOD("du0", 724, R8A774E1_CLK_S2D1),
+ DEF_MOD("lvds", 727, R8A774E1_CLK_S0D4),
+ DEF_MOD("hdmi0", 729, R8A774E1_CLK_HDMI),
+ DEF_MOD("vin7", 804, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin6", 805, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin5", 806, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin4", 807, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin3", 808, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin2", 809, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin1", 810, R8A774E1_CLK_S0D2),
+ DEF_MOD("vin0", 811, R8A774E1_CLK_S0D2),
+ DEF_MOD("etheravb", 812, R8A774E1_CLK_S0D6),
+ DEF_MOD("sata0", 815, R8A774E1_CLK_S3D2),
+ DEF_MOD("gpio7", 905, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio6", 906, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio5", 907, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio4", 908, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio3", 909, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio2", 910, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio1", 911, R8A774E1_CLK_S3D4),
+ DEF_MOD("gpio0", 912, R8A774E1_CLK_S3D4),
+ DEF_MOD("can-fd", 914, R8A774E1_CLK_S3D2),
+ DEF_MOD("can-if1", 915, R8A774E1_CLK_S3D4),
+ DEF_MOD("can-if0", 916, R8A774E1_CLK_S3D4),
+ DEF_MOD("rpc-if", 917, R8A774E1_CLK_RPCD2),
+ DEF_MOD("i2c6", 918, R8A774E1_CLK_S0D6),
+ DEF_MOD("i2c5", 919, R8A774E1_CLK_S0D6),
+ DEF_MOD("adg", 922, R8A774E1_CLK_S0D1),
+ DEF_MOD("i2c-dvfs", 926, R8A774E1_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A774E1_CLK_S0D6),
+ DEF_MOD("i2c3", 928, R8A774E1_CLK_S0D6),
+ DEF_MOD("i2c2", 929, R8A774E1_CLK_S3D2),
+ DEF_MOD("i2c1", 930, R8A774E1_CLK_S3D2),
+ DEF_MOD("i2c0", 931, R8A774E1_CLK_S3D2),
+ DEF_MOD("ssi-all", 1005, R8A774E1_CLK_S3D4),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A774E1_CLK_S3D4),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a774e1_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
+ MOD_CLK_ID(408), /* INTC-AP (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL2 PLL3 PLL4 OSC
+ * 14 13 19 17 (MHz)
+ *-------------------------------------------------------------------------
+ * 0 0 0 0 16.66 x 1 x180 x192 x144 x192 x144 /16
+ * 0 0 0 1 16.66 x 1 x180 x192 x144 x128 x144 /16
+ * 0 0 1 0 Prohibited setting
+ * 0 0 1 1 16.66 x 1 x180 x192 x144 x192 x144 /16
+ * 0 1 0 0 20 x 1 x150 x160 x120 x160 x120 /19
+ * 0 1 0 1 20 x 1 x150 x160 x120 x106 x120 /19
+ * 0 1 1 0 Prohibited setting
+ * 0 1 1 1 20 x 1 x150 x160 x120 x160 x120 /19
+ * 1 0 0 0 25 x 1 x120 x128 x96 x128 x96 /24
+ * 1 0 0 1 25 x 1 x120 x128 x96 x84 x96 /24
+ * 1 0 1 0 Prohibited setting
+ * 1 0 1 1 25 x 1 x120 x128 x96 x128 x96 /24
+ * 1 1 0 0 33.33 / 2 x180 x192 x144 x192 x144 /32
+ * 1 1 0 1 33.33 / 2 x180 x192 x144 x128 x144 /32
+ * 1 1 1 0 Prohibited setting
+ * 1 1 1 1 33.33 / 2 x180 x192 x144 x192 x144 /32
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 11) | \
+ (((md) & BIT(13)) >> 11) | \
+ (((md) & BIT(19)) >> 18) | \
+ (((md) & BIT(17)) >> 17))
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
+ /* EXTAL div PLL1 mult/div PLL3 mult/div OSC prediv */
+ { 1, 192, 1, 192, 1, 16, },
+ { 1, 192, 1, 128, 1, 16, },
+ { 0, /* Prohibited setting */ },
+ { 1, 192, 1, 192, 1, 16, },
+ { 1, 160, 1, 160, 1, 19, },
+ { 1, 160, 1, 106, 1, 19, },
+ { 0, /* Prohibited setting */ },
+ { 1, 160, 1, 160, 1, 19, },
+ { 1, 128, 1, 128, 1, 24, },
+ { 1, 128, 1, 84, 1, 24, },
+ { 0, /* Prohibited setting */ },
+ { 1, 128, 1, 128, 1, 24, },
+ { 2, 192, 1, 192, 1, 32, },
+ { 2, 192, 1, 128, 1, 32, },
+ { 0, /* Prohibited setting */ },
+ { 2, 192, 1, 192, 1, 32, },
+};
+
+static int __init r8a774e1_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+ if (!cpg_pll_config->extal_div) {
+ dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+ return -EINVAL;
+ }
+
+ return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR, cpg_mode);
+}
+
+const struct cpg_mssr_info r8a774e1_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a774e1_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a774e1_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a774e1_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a774e1_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a774e1_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a774e1_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a774e1_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen3_cpg_clk_register,
+};
diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index ff5b3020..068018a 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -287,10 +287,10 @@
};
static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
-
/*
* CPG Clock Data
*/
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index e8d466d..2cd6e38 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -262,10 +262,10 @@
};
static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
-
/*
* CPG Clock Data
*/
diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index 7a05a2f..2b55a06 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -263,6 +263,7 @@
};
static const unsigned int r8a77965_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
diff --git a/drivers/clk/renesas/r8a77970-cpg-mssr.c b/drivers/clk/renesas/r8a77970-cpg-mssr.c
index cbed376..0f59c84 100644
--- a/drivers/clk/renesas/r8a77970-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c
@@ -165,10 +165,10 @@
};
static const unsigned int r8a77970_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
-
/*
* CPG Clock Data
*/
diff --git a/drivers/clk/renesas/r8a77980-cpg-mssr.c b/drivers/clk/renesas/r8a77980-cpg-mssr.c
index 7227f67..9fe3722 100644
--- a/drivers/clk/renesas/r8a77980-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77980-cpg-mssr.c
@@ -180,10 +180,10 @@
};
static const unsigned int r8a77980_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
-
/*
* CPG Clock Data
*/
diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c
index 8eda2e3..2b97ab6 100644
--- a/drivers/clk/renesas/r8a77990-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c
@@ -245,6 +245,7 @@
};
static const unsigned int r8a77990_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c
index 056ebf3..5b46911 100644
--- a/drivers/clk/renesas/r8a77995-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -183,10 +183,10 @@
};
static const unsigned int r8a77995_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
-
/*
* CPG Clock Data
*/
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index dcb6e27..5a306d2 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -416,14 +416,6 @@
init.name = mod->name;
init.ops = &cpg_mstp_clock_ops;
init.flags = CLK_SET_RATE_PARENT;
- for (i = 0; i < info->num_crit_mod_clks; i++)
- if (id == info->crit_mod_clks[i]) {
- dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n",
- mod->name);
- init.flags |= CLK_IS_CRITICAL;
- break;
- }
-
parent_name = __clk_get_name(parent);
init.parent_names = &parent_name;
init.num_parents = 1;
@@ -432,6 +424,15 @@
clock->priv = priv;
clock->hw.init = &init;
+ for (i = 0; i < info->num_crit_mod_clks; i++)
+ if (id == info->crit_mod_clks[i] &&
+ cpg_mstp_clock_is_enabled(&clock->hw)) {
+ dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n",
+ mod->name);
+ init.flags |= CLK_IS_CRITICAL;
+ break;
+ }
+
clk = clk_register(NULL, &clock->hw);
if (IS_ERR(clk))
goto fail;
@@ -720,6 +721,12 @@
.data = &r8a774c0_cpg_mssr_info,
},
#endif
+#ifdef CONFIG_CLK_R8A774E1
+ {
+ .compatible = "renesas,r8a774e1-cpg-mssr",
+ .data = &r8a774e1_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_CLK_R8A7790
{
.compatible = "renesas,r8a7790-cpg-mssr",
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index 55a18ef..1cc5694 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -162,6 +162,7 @@
extern const struct cpg_mssr_info r8a774a1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774b1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774c0_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a774e1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7790_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7791_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7792_cpg_mssr_info;
diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c
index 699527f..8fb12cb 100644
--- a/drivers/clk/socfpga/clk-agilex.c
+++ b/drivers/clk/socfpga/clk-agilex.c
@@ -252,7 +252,7 @@
0, 0, 0, 0, 0x30, 0, 0},
{ AGILEX_MPU_PERIPH_CLK, "mpu_periph_clk", "mpu_clk", NULL, 1, 0, 0x24,
0, 0, 0, 0, 0, 0, 4},
- { AGILEX_MPU_L2RAM_CLK, "mpu_l2ram_clk", "mpu_clk", NULL, 1, 0, 0x24,
+ { AGILEX_MPU_CCU_CLK, "mpu_ccu_clk", "mpu_clk", NULL, 1, 0, 0x24,
0, 0, 0, 0, 0, 0, 2},
{ AGILEX_L4_MAIN_CLK, "l4_main_clk", "noc_clk", NULL, 1, 0, 0x24,
1, 0x44, 0, 2, 0, 0, 0},
@@ -294,8 +294,12 @@
8, 0, 0, 0, 0, 0, 0},
{ AGILEX_SPI_M_CLK, "spi_m_clk", "l4_mp_clk", NULL, 1, 0, 0x7C,
9, 0, 0, 0, 0, 0, 0},
- { AGILEX_NAND_CLK, "nand_clk", "l4_main_clk", NULL, 1, 0, 0x7C,
+ { AGILEX_NAND_X_CLK, "nand_x_clk", "l4_mp_clk", NULL, 1, 0, 0x7C,
10, 0, 0, 0, 0, 0, 0},
+ { AGILEX_NAND_CLK, "nand_clk", "nand_x_clk", NULL, 1, 0, 0x7C,
+ 10, 0, 0, 0, 0, 0, 4},
+ { AGILEX_NAND_ECC_CLK, "nand_ecc_clk", "nand_x_clk", NULL, 1, 0, 0x7C,
+ 10, 0, 0, 0, 0, 0, 4},
};
static int agilex_clk_register_c_perip(const struct stratix10_perip_c_clock *clks,
diff --git a/drivers/clk/versatile/icst.c b/drivers/clk/versatile/icst.c
index ba4b2d2..307cb37 100644
--- a/drivers/clk/versatile/icst.c
+++ b/drivers/clk/versatile/icst.c
@@ -5,7 +5,7 @@
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* Support functions for calculating clocks/divisors for the ICST307
- * clock generators. See http://www.idt.com/ for more information
+ * clock generators. See https://www.idt.com/ for more information
* on these devices.
*
* This is an almost identical implementation to the ICST525 clock generator.
diff --git a/drivers/clk/versatile/icst.h b/drivers/clk/versatile/icst.h
index 73a3062..2962276 100644
--- a/drivers/clk/versatile/icst.h
+++ b/drivers/clk/versatile/icst.h
@@ -3,7 +3,7 @@
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* Support functions for calculating clocks/divisors for the ICST
- * clock generators. See http://www.idt.com/ for more information
+ * clock generators. See https://www.idt.com/ for more information
* on these devices.
*/
#ifndef ICST_H
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 625c8fd..8f2fb4c 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -211,6 +211,20 @@
static void rpi_register_clk_driver(struct device *dev)
{
+ struct device_node *firmware;
+
+ /*
+ * Earlier DTs don't have a node for the firmware clocks but
+ * rely on us creating a platform device by hand. If we do
+ * have a node for the firmware clocks, just bail out here.
+ */
+ firmware = of_get_compatible_child(dev->of_node,
+ "raspberrypi,firmware-clocks");
+ if (firmware) {
+ of_node_put(firmware);
+ return;
+ }
+
rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
-1, NULL, 0);
}
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index a9261cf..7305d57 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -82,6 +82,7 @@
config QCOM_L2_PMU
bool "Qualcomm Technologies L2-cache PMU"
depends on ARCH_QCOM && ARM64 && ACPI
+ select QCOM_KRYO_L2_ACCESSORS
help
Provides support for the L2 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
index 4da37f6..23a0e00 100644
--- a/drivers/perf/qcom_l2_pmu.c
+++ b/drivers/perf/qcom_l2_pmu.c
@@ -23,6 +23,7 @@
#include <asm/barrier.h>
#include <asm/local64.h>
#include <asm/sysreg.h>
+#include <soc/qcom/kryo-l2-accessors.h>
#define MAX_L2_CTRS 9
@@ -79,8 +80,6 @@
#define L2_COUNTER_RELOAD BIT_ULL(31)
#define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63)
-#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
-#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
#define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE)
@@ -99,48 +98,7 @@
#define L2_EVENT_STREX 0x421
#define L2_EVENT_CLREX 0x422
-static DEFINE_RAW_SPINLOCK(l2_access_lock);
-/**
- * set_l2_indirect_reg: write value to an L2 register
- * @reg: Address of L2 register.
- * @value: Value to be written to register.
- *
- * Use architecturally required barriers for ordering between system register
- * accesses
- */
-static void set_l2_indirect_reg(u64 reg, u64 val)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&l2_access_lock, flags);
- write_sysreg_s(reg, L2CPUSRSELR_EL1);
- isb();
- write_sysreg_s(val, L2CPUSRDR_EL1);
- isb();
- raw_spin_unlock_irqrestore(&l2_access_lock, flags);
-}
-
-/**
- * get_l2_indirect_reg: read an L2 register value
- * @reg: Address of L2 register.
- *
- * Use architecturally required barriers for ordering between system register
- * accesses
- */
-static u64 get_l2_indirect_reg(u64 reg)
-{
- u64 val;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&l2_access_lock, flags);
- write_sysreg_s(reg, L2CPUSRSELR_EL1);
- isb();
- val = read_sysreg_s(L2CPUSRDR_EL1);
- raw_spin_unlock_irqrestore(&l2_access_lock, flags);
-
- return val;
-}
struct cluster_pmu;
@@ -211,28 +169,28 @@
static void cluster_pmu_reset(void)
{
/* Reset all counters */
- set_l2_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
- set_l2_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
- set_l2_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
- set_l2_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
+ kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
+ kryo_l2_set_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
+ kryo_l2_set_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
+ kryo_l2_set_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
}
static inline void cluster_pmu_enable(void)
{
- set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
+ kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
}
static inline void cluster_pmu_disable(void)
{
- set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
+ kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
}
static inline void cluster_pmu_counter_set_value(u32 idx, u64 value)
{
if (idx == l2_cycle_ctr_idx)
- set_l2_indirect_reg(L2PMCCNTR, value);
+ kryo_l2_set_indirect_reg(L2PMCCNTR, value);
else
- set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
+ kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
}
static inline u64 cluster_pmu_counter_get_value(u32 idx)
@@ -240,46 +198,46 @@
u64 value;
if (idx == l2_cycle_ctr_idx)
- value = get_l2_indirect_reg(L2PMCCNTR);
+ value = kryo_l2_get_indirect_reg(L2PMCCNTR);
else
- value = get_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
+ value = kryo_l2_get_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
return value;
}
static inline void cluster_pmu_counter_enable(u32 idx)
{
- set_l2_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
+ kryo_l2_set_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_disable(u32 idx)
{
- set_l2_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
+ kryo_l2_set_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_enable_interrupt(u32 idx)
{
- set_l2_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
+ kryo_l2_set_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_disable_interrupt(u32 idx)
{
- set_l2_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
+ kryo_l2_set_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_set_evccntcr(u32 val)
{
- set_l2_indirect_reg(L2PMCCNTCR, val);
+ kryo_l2_set_indirect_reg(L2PMCCNTCR, val);
}
static inline void cluster_pmu_set_evcntcr(u32 ctr, u32 val)
{
- set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
+ kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
}
static inline void cluster_pmu_set_evtyper(u32 ctr, u32 val)
{
- set_l2_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
+ kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
}
static void cluster_pmu_set_resr(struct cluster_pmu *cluster,
@@ -295,11 +253,11 @@
spin_lock_irqsave(&cluster->pmu_lock, flags);
- resr_val = get_l2_indirect_reg(L2PMRESR);
+ resr_val = kryo_l2_get_indirect_reg(L2PMRESR);
resr_val &= ~(L2PMRESR_GROUP_MASK << shift);
resr_val |= field;
resr_val |= L2PMRESR_EN;
- set_l2_indirect_reg(L2PMRESR, resr_val);
+ kryo_l2_set_indirect_reg(L2PMRESR, resr_val);
spin_unlock_irqrestore(&cluster->pmu_lock, flags);
}
@@ -315,14 +273,14 @@
L2PMXEVFILTER_ORGFILTER_IDINDEP |
L2PMXEVFILTER_ORGFILTER_ALL;
- set_l2_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
+ kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
}
static inline u32 cluster_pmu_getreset_ovsr(void)
{
- u32 result = get_l2_indirect_reg(L2PMOVSSET);
+ u32 result = kryo_l2_get_indirect_reg(L2PMOVSSET);
- set_l2_indirect_reg(L2PMOVSCLR, result);
+ kryo_l2_set_indirect_reg(L2PMOVSCLR, result);
return result;
}
@@ -767,7 +725,7 @@
{
int val;
- val = get_l2_indirect_reg(L2PMCR);
+ val = kryo_l2_get_indirect_reg(L2PMCR);
/*
* Read number of counters from L2PMCR and add 1
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 899f8c0..3dc3e3d 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -53,6 +53,10 @@
SDM845. This provides interfaces to clients that use the LLCC.
Say yes here to enable LLCC slice driver.
+config QCOM_KRYO_L2_ACCESSORS
+ bool
+ depends on ARCH_QCOM && ARM64 || COMPILE_TEST
+
config QCOM_MDT_LOADER
tristate
select QCOM_SCM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 7d7e2ec..93392d9 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -24,3 +24,4 @@
obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
+obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c
new file mode 100644
index 0000000..c20cb92
--- /dev/null
+++ b/drivers/soc/qcom/kryo-l2-accessors.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/spinlock.h>
+#include <asm/barrier.h>
+#include <asm/sysreg.h>
+#include <soc/qcom/kryo-l2-accessors.h>
+
+#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
+#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
+
+static DEFINE_RAW_SPINLOCK(l2_access_lock);
+
+/**
+ * kryo_l2_set_indirect_reg() - write value to an L2 register
+ * @reg: Address of L2 register.
+ * @value: Value to be written to register.
+ *
+ * Use architecturally required barriers for ordering between system register
+ * accesses, and system registers with respect to device memory
+ */
+void kryo_l2_set_indirect_reg(u64 reg, u64 val)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2_access_lock, flags);
+ write_sysreg_s(reg, L2CPUSRSELR_EL1);
+ isb();
+ write_sysreg_s(val, L2CPUSRDR_EL1);
+ isb();
+ raw_spin_unlock_irqrestore(&l2_access_lock, flags);
+}
+EXPORT_SYMBOL(kryo_l2_set_indirect_reg);
+
+/**
+ * kryo_l2_get_indirect_reg() - read an L2 register value
+ * @reg: Address of L2 register.
+ *
+ * Use architecturally required barriers for ordering between system register
+ * accesses, and system registers with respect to device memory
+ */
+u64 kryo_l2_get_indirect_reg(u64 reg)
+{
+ u64 val;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2_access_lock, flags);
+ write_sysreg_s(reg, L2CPUSRSELR_EL1);
+ isb();
+ val = read_sysreg_s(L2CPUSRDR_EL1);
+ raw_spin_unlock_irqrestore(&l2_access_lock, flags);
+
+ return val;
+}
+EXPORT_SYMBOL(kryo_l2_get_indirect_reg);
diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h
new file mode 100644
index 0000000..c6a6a09
--- /dev/null
+++ b/include/dt-bindings/clk/versaclock.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* This file defines field values used by the versaclock 6 family
+ * for defining output type
+ */
+
+#define VC5_LVPECL 0
+#define VC5_CMOS 1
+#define VC5_HCSL33 2
+#define VC5_LVDS 3
+#define VC5_CMOS2 4
+#define VC5_CMOSD 5
+#define VC5_HCSL25 6
diff --git a/include/dt-bindings/clock/agilex-clock.h b/include/dt-bindings/clock/agilex-clock.h
index f19cf8c..06feca0 100644
--- a/include/dt-bindings/clock/agilex-clock.h
+++ b/include/dt-bindings/clock/agilex-clock.h
@@ -65,6 +65,8 @@
#define AGILEX_SDMMC_CLK 50
#define AGILEX_SPI_M_CLK 51
#define AGILEX_USB_CLK 52
-#define AGILEX_NUM_CLKS 53
+#define AGILEX_NAND_X_CLK 53
+#define AGILEX_NAND_ECC_CLK 54
+#define AGILEX_NUM_CLKS 55
#endif /* __AGILEX_CLOCK_H */
diff --git a/include/dt-bindings/clock/bcm3368-clock.h b/include/dt-bindings/clock/bcm3368-clock.h
new file mode 100644
index 0000000..74a7382
--- /dev/null
+++ b/include/dt-bindings/clock/bcm3368-clock.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM3368_H
+#define __DT_BINDINGS_CLOCK_BCM3368_H
+
+#define BCM3368_CLK_MAC 3
+#define BCM3368_CLK_TC 5
+#define BCM3368_CLK_US_TOP 6
+#define BCM3368_CLK_DS_TOP 7
+#define BCM3368_CLK_ACM 8
+#define BCM3368_CLK_SPI 9
+#define BCM3368_CLK_USBS 10
+#define BCM3368_CLK_BMU 11
+#define BCM3368_CLK_PCM 12
+#define BCM3368_CLK_NTP 13
+#define BCM3368_CLK_ACP_B 14
+#define BCM3368_CLK_ACP_A 15
+#define BCM3368_CLK_EMUSB 17
+#define BCM3368_CLK_ENET0 18
+#define BCM3368_CLK_ENET1 19
+#define BCM3368_CLK_USBSU 20
+#define BCM3368_CLK_EPHY 21
+
+#endif /* __DT_BINDINGS_CLOCK_BCM3368_H */
diff --git a/include/dt-bindings/clock/bcm6318-clock.h b/include/dt-bindings/clock/bcm6318-clock.h
new file mode 100644
index 0000000..c4417f8
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6318-clock.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6318_H
+#define __DT_BINDINGS_CLOCK_BCM6318_H
+
+#define BCM6318_CLK_ADSL_ASB 0
+#define BCM6318_CLK_USB_ASB 1
+#define BCM6318_CLK_MIPS_ASB 2
+#define BCM6318_CLK_PCIE_ASB 3
+#define BCM6318_CLK_PHYMIPS_ASB 4
+#define BCM6318_CLK_ROBOSW_ASB 5
+#define BCM6318_CLK_SAR_ASB 6
+#define BCM6318_CLK_SDR_ASB 7
+#define BCM6318_CLK_SWREG_ASB 8
+#define BCM6318_CLK_PERIPH_ASB 9
+#define BCM6318_CLK_CPUBUS160 10
+#define BCM6318_CLK_ADSL 11
+#define BCM6318_CLK_SAR125 12
+#define BCM6318_CLK_MIPS 13
+#define BCM6318_CLK_PCIE 14
+#define BCM6318_CLK_ROBOSW250 16
+#define BCM6318_CLK_ROBOSW025 17
+#define BCM6318_CLK_SDR 19
+#define BCM6318_CLK_USBD 20
+#define BCM6318_CLK_HSSPI 25
+#define BCM6318_CLK_PCIE25 27
+#define BCM6318_CLK_PHYMIPS 28
+#define BCM6318_CLK_AFE 29
+#define BCM6318_CLK_QPROC 30
+
+#define BCM6318_UCLK_ADSL 0
+#define BCM6318_UCLK_ARB 1
+#define BCM6318_UCLK_MIPS 2
+#define BCM6318_UCLK_PCIE 3
+#define BCM6318_UCLK_PERIPH 4
+#define BCM6318_UCLK_PHYMIPS 5
+#define BCM6318_UCLK_ROBOSW 6
+#define BCM6318_UCLK_SAR 7
+#define BCM6318_UCLK_SDR 8
+#define BCM6318_UCLK_USB 9
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6318_H */
diff --git a/include/dt-bindings/clock/bcm63268-clock.h b/include/dt-bindings/clock/bcm63268-clock.h
new file mode 100644
index 0000000..da23e69
--- /dev/null
+++ b/include/dt-bindings/clock/bcm63268-clock.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM63268_H
+#define __DT_BINDINGS_CLOCK_BCM63268_H
+
+#define BCM63268_CLK_DIS_GLESS 0
+#define BCM63268_CLK_VDSL_QPROC 1
+#define BCM63268_CLK_VDSL_AFE 2
+#define BCM63268_CLK_VDSL 3
+#define BCM63268_CLK_MIPS 4
+#define BCM63268_CLK_WLAN_OCP 5
+#define BCM63268_CLK_DECT 6
+#define BCM63268_CLK_FAP0 7
+#define BCM63268_CLK_FAP1 8
+#define BCM63268_CLK_SAR 9
+#define BCM63268_CLK_ROBOSW 10
+#define BCM63268_CLK_PCM 11
+#define BCM63268_CLK_USBD 12
+#define BCM63268_CLK_USBH 13
+#define BCM63268_CLK_IPSEC 14
+#define BCM63268_CLK_SPI 15
+#define BCM63268_CLK_HSSPI 16
+#define BCM63268_CLK_PCIE 17
+#define BCM63268_CLK_PHYMIPS 18
+#define BCM63268_CLK_GMAC 19
+#define BCM63268_CLK_NAND 20
+#define BCM63268_CLK_TBUS 27
+#define BCM63268_CLK_ROBOSW250 31
+
+#endif /* __DT_BINDINGS_CLOCK_BCM63268_H */
diff --git a/include/dt-bindings/clock/bcm6328-clock.h b/include/dt-bindings/clock/bcm6328-clock.h
new file mode 100644
index 0000000..1f6a310
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6328-clock.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6328_H
+#define __DT_BINDINGS_CLOCK_BCM6328_H
+
+#define BCM6328_CLK_PHYMIPS 0
+#define BCM6328_CLK_ADSL_QPROC 1
+#define BCM6328_CLK_ADSL_AFE 2
+#define BCM6328_CLK_ADSL 3
+#define BCM6328_CLK_MIPS 4
+#define BCM6328_CLK_SAR 5
+#define BCM6328_CLK_PCM 6
+#define BCM6328_CLK_USBD 7
+#define BCM6328_CLK_USBH 8
+#define BCM6328_CLK_HSSPI 9
+#define BCM6328_CLK_PCIE 10
+#define BCM6328_CLK_ROBOSW 11
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6328_H */
diff --git a/include/dt-bindings/clock/bcm6358-clock.h b/include/dt-bindings/clock/bcm6358-clock.h
new file mode 100644
index 0000000..980c9ca
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6358-clock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6358_H
+#define __DT_BINDINGS_CLOCK_BCM6358_H
+
+#define BCM6358_CLK_ENET 4
+#define BCM6358_CLK_ADSLPHY 5
+#define BCM6358_CLK_PCM 8
+#define BCM6358_CLK_SPI 9
+#define BCM6358_CLK_USBS 10
+#define BCM6358_CLK_SAR 11
+#define BCM6358_CLK_EMUSB 17
+#define BCM6358_CLK_ENET0 18
+#define BCM6358_CLK_ENET1 19
+#define BCM6358_CLK_USBSU 20
+#define BCM6358_CLK_EPHY 21
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6358_H */
diff --git a/include/dt-bindings/clock/bcm6362-clock.h b/include/dt-bindings/clock/bcm6362-clock.h
new file mode 100644
index 0000000..17655cd
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6362-clock.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6362_H
+#define __DT_BINDINGS_CLOCK_BCM6362_H
+
+#define BCM6362_CLK_ADSL_QPROC 1
+#define BCM6362_CLK_ADSL_AFE 2
+#define BCM6362_CLK_ADSL 3
+#define BCM6362_CLK_MIPS 4
+#define BCM6362_CLK_WLAN_OCP 5
+#define BCM6362_CLK_SWPKT_USB 7
+#define BCM6362_CLK_SWPKT_SAR 8
+#define BCM6362_CLK_SAR 9
+#define BCM6362_CLK_ROBOSW 10
+#define BCM6362_CLK_PCM 11
+#define BCM6362_CLK_USBD 12
+#define BCM6362_CLK_USBH 13
+#define BCM6362_CLK_IPSEC 14
+#define BCM6362_CLK_SPI 15
+#define BCM6362_CLK_HSSPI 16
+#define BCM6362_CLK_PCIE 17
+#define BCM6362_CLK_FAP 18
+#define BCM6362_CLK_PHYMIPS 19
+#define BCM6362_CLK_NAND 20
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6362_H */
diff --git a/include/dt-bindings/clock/bcm6368-clock.h b/include/dt-bindings/clock/bcm6368-clock.h
new file mode 100644
index 0000000..f161d53
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6368-clock.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6368_H
+#define __DT_BINDINGS_CLOCK_BCM6368_H
+
+#define BCM6368_CLK_VDSL_QPROC 2
+#define BCM6368_CLK_VDSL_AFE 3
+#define BCM6368_CLK_VDSL_BONDING 4
+#define BCM6368_CLK_VDSL 5
+#define BCM6368_CLK_PHYMIPS 6
+#define BCM6368_CLK_SWPKT_USB 7
+#define BCM6368_CLK_SWPKT_SAR 8
+#define BCM6368_CLK_SPI 9
+#define BCM6368_CLK_USBD 10
+#define BCM6368_CLK_SAR 11
+#define BCM6368_CLK_ROBOSW 12
+#define BCM6368_CLK_UTOPIA 13
+#define BCM6368_CLK_PCM 14
+#define BCM6368_CLK_USBH 15
+#define BCM6368_CLK_DIS_GLESS 16
+#define BCM6368_CLK_NAND 17
+#define BCM6368_CLK_IPSEC 18
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6368_H */
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
index b0d65d7..40d4994 100644
--- a/include/dt-bindings/clock/g12a-clkc.h
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -145,5 +145,7 @@
#define CLKID_CPU3_CLK 255
#define CLKID_SPICC0_SCLK 258
#define CLKID_SPICC1_SCLK 261
+#define CLKID_NNA_AXI_CLK 264
+#define CLKID_NNA_CORE_CLK 267
#endif /* __G12A_CLKC_H */
diff --git a/include/dt-bindings/clock/qcom,apss-ipq.h b/include/dt-bindings/clock/qcom,apss-ipq.h
new file mode 100644
index 0000000..77b6e05
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,apss-ipq.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
+#define _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
+
+#define APCS_ALIAS0_CLK_SRC 0
+#define APCS_ALIAS0_CORE_CLK 1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq8074.h b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
index 4de4811..8e2bec1 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
@@ -230,6 +230,9 @@
#define GCC_GP1_CLK 221
#define GCC_GP2_CLK 222
#define GCC_GP3_CLK 223
+#define GCC_PCIE0_AXI_S_BRIDGE_CLK 224
+#define GCC_PCIE0_RCHNG_CLK_SRC 225
+#define GCC_PCIE0_RCHNG_CLK 226
#define GCC_BLSP1_BCR 0
#define GCC_BLSP1_QUP1_BCR 1
@@ -362,5 +365,6 @@
#define GCC_PCIE1_AXI_SLAVE_ARES 128
#define GCC_PCIE1_AHB_ARES 129
#define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130
+#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
#endif
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
index ae74c43..8aaba7c 100644
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -133,5 +133,21 @@
#define RPM_SMD_RF_CLK3_A 87
#define RPM_SMD_RF_CLK3_PIN 88
#define RPM_SMD_RF_CLK3_A_PIN 89
+#define RPM_SMD_MMSSNOC_AXI_CLK 90
+#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
+#define RPM_SMD_CNOC_PERIPH_CLK 92
+#define RPM_SMD_CNOC_PERIPH_A_CLK 93
+#define RPM_SMD_LN_BB_CLK3 94
+#define RPM_SMD_LN_BB_CLK3_A 95
+#define RPM_SMD_LN_BB_CLK1_PIN 96
+#define RPM_SMD_LN_BB_CLK1_A_PIN 97
+#define RPM_SMD_LN_BB_CLK2_PIN 98
+#define RPM_SMD_LN_BB_CLK2_A_PIN 99
+#define RPM_SMD_SYSMMNOC_CLK 100
+#define RPM_SMD_SYSMMNOC_A_CLK 101
+#define RPM_SMD_CE2_CLK 102
+#define RPM_SMD_CE2_A_CLK 103
+#define RPM_SMD_CE3_CLK 104
+#define RPM_SMD_CE3_A_CLK 105
#endif
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index bd1ee90..6f815be 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -189,7 +189,7 @@
* and >= numerator) Return 0 on success, otherwise -EERROR.
*
* @init: Perform platform-specific initialization magic.
- * This is not not used by any of the basic clock types.
+ * This is not used by any of the basic clock types.
* This callback exist for HW which needs to perform some
* initialisation magic for CCF to get an accurate view of the
* clock. It may also be used dynamic resource allocation is
diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h
new file mode 100644
index 0000000..673c534
--- /dev/null
+++ b/include/soc/qcom/kryo-l2-accessors.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
+#define __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
+
+void kryo_l2_set_indirect_reg(u64 reg, u64 val);
+u64 kryo_l2_get_indirect_reg(u64 reg);
+
+#endif
