Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Fix for arch/sh build regression with newer binutils, removal of SH5,
fixes for module exports, and misc cleanup"
* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
sh: remove sh5 support
sh: add missing EXPORT_SYMBOL() for __delay
sh: Convert ins[bwl]/outs[bwl] macros to inline functions
sh: Convert iounmap() macros to inline functions
sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
sh: configs: Cleanup old Kconfig IO scheduler options
arch/sh: vmlinux.scr
sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
sh: sh4a: Bring back tmu3_device early device
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0424b8f..a7cc146 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -53,15 +53,6 @@
select HAVE_NMI
select NEED_SG_DMA_LENGTH
select ARCH_HAS_GIGANTIC_PAGE
-
- help
- The SuperH is a RISC processor targeted for use in embedded systems
- and consumer electronics; it was also used in the Sega Dreamcast
- gaming console. The SuperH port has a home page at
- <http://www.linux-sh.org/>.
-
-config SUPERH32
- def_bool "$(ARCH)" = "sh"
select ARCH_32BIT_OFF_T
select GUP_GET_PTE_LOW_HIGH if X2TLB
select HAVE_KPROBES
@@ -79,19 +70,15 @@
select ARCH_HIBERNATION_POSSIBLE if MMU
select SPARSE_IRQ
select HAVE_STACKPROTECTOR
-
-config SUPERH64
- def_bool "$(ARCH)" = "sh64"
- select HAVE_EXIT_THREAD
- select KALLSYMS
+ help
+ The SuperH is a RISC processor targeted for use in embedded systems
+ and consumer electronics; it was also used in the Sega Dreamcast
+ gaming console. The SuperH port has a home page at
+ <http://www.linux-sh.org/>.
config GENERIC_BUG
def_bool y
- depends on BUG && SUPERH32
-
-config GENERIC_CSUM
- def_bool y
- depends on SUPERH64
+ depends on BUG
config GENERIC_HWEIGHT
def_bool y
@@ -201,12 +188,6 @@
select CPU_SH4A
select CPU_HAS_DSP
-config CPU_SH5
- bool
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_TMU
- select SYS_SUPPORTS_HUGETLBFS if MMU
-
config CPU_SHX2
bool
@@ -226,8 +207,6 @@
default y
bool
-if SUPERH32
-
choice
prompt "Processor sub-type selection"
@@ -516,27 +495,6 @@
endchoice
-endif
-
-if SUPERH64
-
-choice
- prompt "Processor sub-type selection"
-
-# SH-5 Processor Support
-
-config CPU_SUBTYPE_SH5_101
- bool "Support SH5-101 processor"
- select CPU_SH5
-
-config CPU_SUBTYPE_SH5_103
- bool "Support SH5-103 processor"
- select CPU_SH5
-
-endchoice
-
-endif
-
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
@@ -590,7 +548,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on SUPERH32 && MMU
+ depends on MMU
select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
@@ -608,7 +566,7 @@
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
- depends on SUPERH32 && BROKEN_ON_SMP
+ depends on BROKEN_ON_SMP
help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
@@ -622,7 +580,7 @@
config KEXEC_JUMP
bool "kexec jump (EXPERIMENTAL)"
- depends on SUPERH32 && KEXEC && HIBERNATION
+ depends on KEXEC && HIBERNATION
help
Jump between original kernel and kexeced kernel and invoke
code via KEXEC
@@ -699,7 +657,7 @@
config GUSA
def_bool y
- depends on !SMP && SUPERH32
+ depends on !SMP
help
This enables support for gUSA (general UserSpace Atomicity).
This is the default implementation for both UP and non-ll/sc
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index 4a4edc7..97ca35f 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -13,7 +13,6 @@
config CPU_BIG_ENDIAN
bool "Big Endian"
- depends on !CPU_SH5
endchoice
@@ -27,10 +26,6 @@
This option must be set in order to enable the FPU.
-config SH64_FPU_DENORM_FLUSH
- bool "Flush floating point denorms to zero"
- depends on SH_FPU && SUPERH64
-
config SH_FPU_EMU
def_bool n
prompt "FPU emulation support"
@@ -77,10 +72,6 @@
If unsure, say N.
-config SH64_ID2815_WORKAROUND
- bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
- depends on CPU_SUBTYPE_SH5_101
-
config CPU_HAS_INTEVT
bool
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 010b6c3..28a43d6 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -5,7 +5,6 @@
config SH_STANDARD_BIOS
bool "Use LinuxSH standard BIOS"
- depends on SUPERH32
help
Say Y here if your target has the gdb-sh-stub
package from www.m17n.org (or any conforming standard LinuxSH BIOS)
@@ -19,7 +18,7 @@
config STACK_DEBUG
bool "Check for stack overflows"
- depends on DEBUG_KERNEL && SUPERH32
+ depends on DEBUG_KERNEL
help
This option will cause messages to be printed if free stack space
drops below a certain limit. Saying Y here will add overhead to
@@ -38,7 +37,7 @@
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
- depends on DEBUG_KERNEL && SUPERH32 && BROKEN
+ depends on DEBUG_KERNEL && BROKEN
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
@@ -46,7 +45,7 @@
config DUMP_CODE
bool "Show disassembly of nearby code in register dumps"
- depends on DEBUG_KERNEL && SUPERH32
+ depends on DEBUG_KERNEL
default y if DEBUG_BUGVERBOSE
default n
help
@@ -59,7 +58,6 @@
config DWARF_UNWINDER
bool "Enable the DWARF unwinder for stacktraces"
select FRAME_POINTER
- depends on SUPERH32
default n
help
Enabling this option will make stacktraces more accurate, at
@@ -77,11 +75,6 @@
For all other cases, say N. If this option seems perplexing, or
you aren't sure, say N.
-config SH64_SR_WATCH
- bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
- depends on SUPERH64
-
config MCOUNT
def_bool y
- depends on SUPERH32
depends on STACK_DEBUG || FUNCTION_TRACER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index b4a86f2..da9cf95 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -11,7 +11,7 @@
#
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
+ CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
endif
endif
@@ -29,12 +29,9 @@
isa-$(CONFIG_CPU_SH4) := sh4
isa-$(CONFIG_CPU_SH4A) := sh4a
isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
-isa-$(CONFIG_CPU_SH5) := shmedia
-ifeq ($(CONFIG_SUPERH32),y)
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
isa-y := $(isa-y)-up
-endif
cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,)
@@ -47,7 +44,6 @@
cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
$(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,)
-cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,)
ifeq ($(cflags-y),)
#
@@ -88,7 +84,7 @@
-R .stab -R .stabstr -S
# Give the various platforms the opportunity to set default image types
-defaultimage-$(CONFIG_SUPERH32) := zImage
+defaultimage-y := zImage
defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
defaultimage-$(CONFIG_SH_RSK) := uImage
defaultimage-$(CONFIG_SH_URQUELL) := uImage
@@ -107,31 +103,22 @@
# Choosing incompatible machines durings configuration will result in
# error messages during linking.
#
-ifdef CONFIG_SUPERH32
UTS_MACHINE := sh
-BITS := 32
LDFLAGS_vmlinux += -e _stext
-else
-UTS_MACHINE := sh64
-BITS := 64
-LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
- --defsym phys_stext_shmedia=phys_stext+1 \
- -e phys_stext_shmedia
-endif
ifdef CONFIG_CPU_LITTLE_ENDIAN
-ld-bfd := elf32-$(UTS_MACHINE)-linux
+ld-bfd := elf32-sh-linux
LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
KBUILD_LDFLAGS += -EL
else
-ld-bfd := elf32-$(UTS_MACHINE)big-linux
+ld-bfd := elf32-shbig-linux
LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
KBUILD_LDFLAGS += -EB
endif
-export ld-bfd BITS
+export ld-bfd
-head-y := arch/sh/kernel/head_$(BITS).o
+head-y := arch/sh/kernel/head_32.o
core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
@@ -185,7 +172,6 @@
cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a
cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5
cpuincdir-y += cpu-common # Must be last
drivers-y += arch/sh/drivers/
@@ -206,8 +192,7 @@
KBUILD_CFLAGS += -fasynchronous-unwind-tables
endif
-libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
-libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
+libs-y := arch/sh/lib/ $(libs-y)
BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index f5e1bd7..ad0e240 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -8,9 +8,9 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
vmlinux.bin.bz2 vmlinux.bin.lzma \
vmlinux.bin.xz vmlinux.bin.lzo \
- head_$(BITS).o misc.o piggy.o
+ head_32.o misc.o piggy.o
-OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
+OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o
GCOV_PROFILE := n
@@ -39,15 +39,11 @@
#
# Pull in the necessary libgcc bits from the in-kernel implementation.
#
-lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
- lshrsi3.S
-lib1funcs-obj := \
+lib1funcs-y := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S
+lib1funcs-obj := \
$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib
-ifeq ($(BITS),64)
- lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir))
-endif
KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index e69ec12..a03b668 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -116,11 +116,7 @@
{
}
-#ifdef CONFIG_SUPERH64
-#define stackalign 8
-#else
#define stackalign 4
-#endif
#define STACK_SIZE (4096)
long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
@@ -130,14 +126,10 @@
{
unsigned long output_addr;
-#ifdef CONFIG_SUPERH64
- output_addr = (CONFIG_MEMORY_START + 0x2000);
-#else
output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
#if defined(CONFIG_29BIT)
output_addr |= P2SEG;
#endif
-#endif
output = (unsigned char *)output_addr;
free_mem_ptr = (unsigned long)&_end;
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
index 862d748..dd292b4 100644
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ b/arch/sh/boot/compressed/vmlinux.scr
@@ -1,6 +1,6 @@
SECTIONS
{
- .rodata..compressed : {
+ .rodata..compressed : ALIGN(8) {
input_len = .;
LONG(input_data_end - input_data) input_data = .;
*(.data)
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
index 6dd0da7..6abd9bd 100644
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ b/arch/sh/configs/apsh4ad0a_defconfig
@@ -20,7 +20,8 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_CPU_SUBTYPE_SH7786=y
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index 1dc3f67..8334044 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -10,8 +10,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7724=y
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 664c4de..0989ed9 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -14,8 +14,6 @@
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7720=y
CONFIG_MEMORY_START=0x0C000000
CONFIG_MEMORY_SIZE=0x03F00000
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index e3a1d3d..246408e 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -12,7 +12,6 @@
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_CPU_SUBTYPE_SH7709=y
CONFIG_MEMORY_START=0x0C000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 0a18f80..c97ec60 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -12,8 +12,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 7226ac5..55fce65 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -15,8 +15,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7785=y
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 9f4f474..841809b 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -15,8 +15,6 @@
CONFIG_OPROFILE=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7201=y
CONFIG_MEMORY_SIZE=0x01000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 10a32bd..0055031 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -16,8 +16,6 @@
CONFIG_OPROFILE=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7203=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig
index 7864319..f7b9c52 100644
--- a/arch/sh/configs/rsk7264_defconfig
+++ b/arch/sh/configs/rsk7264_defconfig
@@ -17,8 +17,6 @@
CONFIG_PROFILING=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7264=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig
index fb9fa7f..4bff14f 100644
--- a/arch/sh/configs/rsk7269_defconfig
+++ b/arch/sh/configs/rsk7269_defconfig
@@ -4,8 +4,6 @@
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_CPU_SUBTYPE_SH7269=y
CONFIG_MEMORY_START=0x0c000000
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index 7fa116b..61bec46 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -39,7 +39,8 @@
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_CPU_SUBTYPE_SH7786=y
CONFIG_MEMORY_START=0x40000000
CONFIG_MEMORY_SIZE=0x20000000
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index a93402b..21a43f1 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -28,8 +28,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7206=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 06d067c..4e794e7 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -11,7 +11,6 @@
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7343=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index f54722d..3264415 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -11,8 +11,6 @@
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_MEMORY_START=0x0c000000
CONFIG_FLATMEM_MANUAL=y
CONFIG_CPU_BIG_ENDIAN=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index ddfc698..4496b94 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -8,8 +8,6 @@
CONFIG_SLAB=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7705=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 9a527f9..ee6d28a 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -12,8 +12,6 @@
CONFIG_SLAB=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7712=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 3b0e1eb..bad921b 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -12,8 +12,6 @@
CONFIG_SLAB=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7721=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 88bf9e8..09e4558 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -8,8 +8,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7722=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_NUMA=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index ec32c82..dcd85b8 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -9,7 +9,6 @@
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_SH_7780_SOLUTION_ENGINE=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index c86f284..0842691 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -11,7 +11,6 @@
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7710=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index 9f2aed0..d0933a9 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -36,7 +36,7 @@
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index d589cfd..a27b129 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -12,8 +12,6 @@
# CONFIG_SHMEM is not set
CONFIG_SLOB=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7706=y
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index dc2e306..103b81e 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -8,8 +8,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_CPU_SUBTYPE_SH7366=y
CONFIG_MEMORY_SIZE=0x01f00000
CONFIG_NUMA=y
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 947bfe8..a5c1e90 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -10,7 +10,6 @@
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
-obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
pci-dreamcast.o
diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c
deleted file mode 100644
index 9fbaf72..0000000
--- a/arch/sh/drivers/pci/ops-sh5.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support functions for the SH5 PCI hardware.
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include "pci-sh5.h"
-
-static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
- break;
- case 2:
- *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
- break;
- case 4:
- *val = SH5PCI_READ(PDR);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
- break;
- case 2:
- SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
- break;
- case 4:
- SH5PCI_WRITE(PDR, val);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops sh5_pci_ops = {
- .read = sh5pci_read,
- .write = sh5pci_write,
-};
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
deleted file mode 100644
index 03225d2..0000000
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- *
- * Support functions for the SH5 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <cpu/irq.h>
-#include <asm/io.h>
-#include "pci-sh5.h"
-
-unsigned long pcicr_virt;
-unsigned long PCI_IO_AREA;
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 __init r2p2(u32 num)
-{
- int i = 31;
- u32 tmp = num;
-
- if (num == 0)
- return 0;
-
- do {
- if (tmp & (1 << 31))
- break;
- i--;
- tmp <<= 1;
- } while (i >= 0);
-
- tmp = 1 << i;
- /* If the original number isn't a power of 2, round it up */
- if (tmp != num)
- tmp <<= 1;
-
- return tmp;
-}
-
-static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- unsigned pci_int, pci_air, pci_cir, pci_aint;
-
- pci_int = SH5PCI_READ(INT);
- pci_cir = SH5PCI_READ(CIR);
- pci_air = SH5PCI_READ(AIR);
-
- if (pci_int) {
- printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
- printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(INT, ~0);
- }
-
- pci_aint = SH5PCI_READ(AINT);
- if (pci_aint) {
- printk("PCI ARB INTERRUPT!\n");
- printk("PCI AINT -> 0x%x\n", pci_aint);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(AINT, ~0);
- }
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
-{
- printk("SERR IRQ\n");
-
- return IRQ_NONE;
-}
-
-static struct resource sh5_pci_resources[2];
-
-static struct pci_channel sh5pci_controller = {
- .pci_ops = &sh5_pci_ops,
- .resources = sh5_pci_resources,
- .nr_resources = ARRAY_SIZE(sh5_pci_resources),
- .mem_offset = 0x00000000,
- .io_offset = 0x00000000,
-};
-
-static int __init sh5pci_init(void)
-{
- unsigned long memStart = __pa(memory_start);
- unsigned long memSize = __pa(memory_end) - memStart;
- u32 lsr0;
- u32 uval;
-
- if (request_irq(IRQ_ERR, pcish5_err_irq,
- 0, "PCI Error",NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
- return -EINVAL;
- }
-
- if (request_irq(IRQ_SERR, pcish5_serr_irq,
- 0, "PCI SERR interrupt", NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
- return -EINVAL;
- }
-
- pcicr_virt = (unsigned long)ioremap(SH5PCI_ICR_BASE, 1024);
- if (!pcicr_virt) {
- panic("Unable to remap PCICR\n");
- }
-
- PCI_IO_AREA = (unsigned long)ioremap(SH5PCI_IO_BASE, 0x10000);
- if (!PCI_IO_AREA) {
- panic("Unable to remap PCIIO\n");
- }
-
- /* Clear snoop registers */
- SH5PCI_WRITE(CSCR0, 0);
- SH5PCI_WRITE(CSCR1, 0);
-
- /* Switch off interrupts */
- SH5PCI_WRITE(INTM, 0);
- SH5PCI_WRITE(AINTM, 0);
- SH5PCI_WRITE(PINTM, 0);
-
- /* Set bus active, take it out of reset */
- uval = SH5PCI_READ(CR);
-
- /* Set command Register */
- SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
- CR_PFCS | CR_BMAM);
-
- uval=SH5PCI_READ(CR);
-
- /* Allow it to be a master */
- /* NB - WE DISABLE I/O ACCESS to stop overlap */
- /* set WAIT bit to enable stepping, an attempt to improve stability */
- SH5PCI_WRITE_SHORT(CSR_CMD,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_WAIT);
-
- /*
- ** Set translation mapping memory in order to convert the address
- ** used for the main bus, to the PCI internal address.
- */
- SH5PCI_WRITE(MBR,0x40000000);
-
- /* Always set the max size 512M */
- SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
-
- /*
- ** I/O addresses are mapped at internal PCI specific address
- ** as is described into the configuration bridge table.
- ** These are changed to 0, to allow cards that have legacy
- ** io such as vga to function correctly. We set the SH5 IOBAR to
- ** 256K, which is a bit big as we can only have 64K of address space
- */
-
- SH5PCI_WRITE(IOBR,0x0);
-
- /* Set up a 256K window. Totally pointless waste of address space */
- SH5PCI_WRITE(IOBMR,0);
-
- /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
- * Ideally, we would want to map the I/O region somewhere, but it
- * is so big this is not that easy!
- */
- SH5PCI_WRITE(CSR_IBAR0,~0);
- /* Set memory size value */
- memSize = memory_end - memory_start;
-
- /* Now we set up the mbars so the PCI bus can see the memory of
- * the machine */
- if (memSize < (1024 * 1024)) {
- printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
- memSize);
- return -EINVAL;
- }
-
- /* Set LSR 0 */
- lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
- ((r2p2(memSize) - 0x100000) | 0x1);
- SH5PCI_WRITE(LSR0, lsr0);
-
- /* Set MBAR 0 */
- SH5PCI_WRITE(CSR_MBAR0, memory_start);
- SH5PCI_WRITE(LAR0, memory_start);
-
- SH5PCI_WRITE(CSR_MBAR1,0);
- SH5PCI_WRITE(LAR1,0);
- SH5PCI_WRITE(LSR1,0);
-
- /* Enable the PCI interrupts on the device */
- SH5PCI_WRITE(INTM, ~0);
- SH5PCI_WRITE(AINTM, ~0);
- SH5PCI_WRITE(PINTM, ~0);
-
- sh5_pci_resources[0].start = PCI_IO_AREA;
- sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
-
- sh5_pci_resources[1].start = memStart;
- sh5_pci_resources[1].end = memStart + memSize;
-
- return register_pci_controller(&sh5pci_controller);
-}
-arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
deleted file mode 100644
index 91348af..0000000
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * Definitions for the SH5 PCI hardware.
- */
-#ifndef __PCI_SH5_H
-#define __PCI_SH5_H
-
-/* Product ID */
-#define PCISH5_PID 0x350d
-
-/* vendor ID */
-#define PCISH5_VID 0x1054
-
-/* Configuration types */
-#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
-#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
-
-/* VCR data */
-#define PCISH5_VCR_STATUS 0x00
-#define PCISH5_VCR_VERSION 0x08
-
-/*
-** ICR register offsets and bits
-*/
-#define PCISH5_ICR_CR 0x100 /* PCI control register values */
-#define CR_PBAM (1<<12)
-#define CR_PFCS (1<<11)
-#define CR_FTO (1<<10)
-#define CR_PFE (1<<9)
-#define CR_TBS (1<<8)
-#define CR_SPUE (1<<7)
-#define CR_BMAM (1<<6)
-#define CR_HOST (1<<5)
-#define CR_CLKEN (1<<4)
-#define CR_SOCS (1<<3)
-#define CR_IOCS (1<<2)
-#define CR_RSTCTL (1<<1)
-#define CR_CFINT (1<<0)
-#define CR_LOCK_MASK 0xa5000000
-
-#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
-#define INT_MADIM (1<<2)
-
-#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
-#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
-#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
-#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
-#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
-#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
-#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
-#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
-#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
-#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
-#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
-#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
-#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
-#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
-#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
-#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
-#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
-#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
-#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
-#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
-
-/* These are configs space registers */
-#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
-#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
-#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
-#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
-#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
-#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
-#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
-
-/* Base address of registers */
-#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
-#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
-/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
-
-extern unsigned long pcicr_virt;
-/* Register selection macro */
-#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
-/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
-
-/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
-
-/* Read I/O functions */
-#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg))
-
-/* Set PCI config bits */
-#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
-
-/* Set PCI command register */
-#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
-
-/* Size converters */
-#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
-#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
-
-extern struct pci_ops sh5_pci_ops;
-
-#endif /* __PCI_SH5_H */
diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h
index 66faae1..0d58a01 100644
--- a/arch/sh/include/asm/barrier.h
+++ b/arch/sh/include/asm/barrier.h
@@ -6,7 +6,7 @@
#ifndef __ASM_SH_BARRIER_H
#define __ASM_SH_BARRIER_H
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#if defined(CONFIG_CPU_SH4A)
#include <asm/cache_insns.h>
#endif
@@ -24,7 +24,7 @@
* Historically we have only done this type of barrier for the MMUCR, but
* it's also necessary for the CCR, so we make it generic here instead.
*/
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#if defined(CONFIG_CPU_SH4A)
#define mb() __asm__ __volatile__ ("synco": : :"memory")
#define rmb() mb()
#define wmb() mb()
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
index 8c35782..445dd14 100644
--- a/arch/sh/include/asm/bitops.h
+++ b/arch/sh/include/asm/bitops.h
@@ -26,7 +26,6 @@
#include <asm-generic/bitops/non-atomic.h>
#endif
-#ifdef CONFIG_SUPERH32
static inline unsigned long ffz(unsigned long word)
{
unsigned long result;
@@ -60,31 +59,6 @@
: "t");
return result;
}
-#else
-static inline unsigned long ffz(unsigned long word)
-{
- unsigned long result, __d2, __d3;
-
- __asm__("gettr tr0, %2\n\t"
- "pta $+32, tr0\n\t"
- "andi %1, 1, %3\n\t"
- "beq %3, r63, tr0\n\t"
- "pta $+4, tr0\n"
- "0:\n\t"
- "shlri.l %1, 1, %1\n\t"
- "addi %0, 1, %0\n\t"
- "andi %1, 1, %3\n\t"
- "beqi %3, 1, tr0\n"
- "1:\n\t"
- "ptabs %2, tr0\n\t"
- : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
- : "0" (0L), "1" (word));
-
- return result;
-}
-
-#include <asm-generic/bitops/__ffs.h>
-#endif
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/ffs.h>
diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h
index 7e3d816..5d04f2c 100644
--- a/arch/sh/include/asm/bl_bit.h
+++ b/arch/sh/include/asm/bl_bit.h
@@ -1,11 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BL_BIT_H
-#define __ASM_SH_BL_BIT_H
-
-#ifdef CONFIG_SUPERH32
-# include <asm/bl_bit_32.h>
-#else
-# include <asm/bl_bit_64.h>
-#endif
-
-#endif /* __ASM_SH_BL_BIT_H */
+#include <asm/bl_bit_32.h>
diff --git a/arch/sh/include/asm/bl_bit_64.h b/arch/sh/include/asm/bl_bit_64.h
deleted file mode 100644
index aac9780..0000000
--- a/arch/sh/include/asm/bl_bit_64.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#ifndef __ASM_SH_BL_BIT_64_H
-#define __ASM_SH_BL_BIT_64_H
-
-#include <asm/processor.h>
-
-#define SR_BL_LL 0x0000000010000000LL
-
-static inline void set_bl_bit(void)
-{
- unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "or %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-}
-
-#endif /* __ASM_SH_BL_BIT_64_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
index 030df56..fe52abb 100644
--- a/arch/sh/include/asm/bugs.h
+++ b/arch/sh/include/asm/bugs.h
@@ -53,10 +53,6 @@
*p++ = 's';
*p++ = 'p';
break;
- case CPU_FAMILY_SH5:
- *p++ = '6';
- *p++ = '4';
- break;
case CPU_FAMILY_UNKNOWN:
/*
* Specifically use CPU_FAMILY_UNKNOWN rather than
diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h
index c5a4acd..d7edd52 100644
--- a/arch/sh/include/asm/cache_insns.h
+++ b/arch/sh/include/asm/cache_insns.h
@@ -1,12 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHE_INSNS_H
-#define __ASM_SH_CACHE_INSNS_H
-
-
-#ifdef CONFIG_SUPERH32
-# include <asm/cache_insns_32.h>
-#else
-# include <asm/cache_insns_64.h>
-#endif
-
-#endif /* __ASM_SH_CACHE_INSNS_H */
+#include <asm/cache_insns_32.h>
diff --git a/arch/sh/include/asm/cache_insns_64.h b/arch/sh/include/asm/cache_insns_64.h
deleted file mode 100644
index ed682b9..0000000
--- a/arch/sh/include/asm/cache_insns_64.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#ifndef __ASM_SH_CACHE_INSNS_64_H
-#define __ASM_SH_CACHE_INSNS_64_H
-
-#define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
-#define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
-#define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
-#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
-
-static inline reg_size_t register_align(void *val)
-{
- return (unsigned long long)(signed long long)(signed long)val;
-}
-
-#endif /* __ASM_SH_CACHE_INSNS_64_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
index a460a10..00e39dd 100644
--- a/arch/sh/include/asm/checksum.h
+++ b/arch/sh/include/asm/checksum.h
@@ -1,6 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_SUPERH32
-# include <asm/checksum_32.h>
-#else
-# include <asm-generic/checksum.h>
-#endif
+#include <asm/checksum_32.h>
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
index 5ec8db1..7661fb5 100644
--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -133,28 +133,6 @@
#define ELF_PLATFORM (utsname()->machine)
-#ifdef __SH5__
-#define ELF_PLAT_INIT(_r, load_addr) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
- _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
- _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
- _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
- _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
- _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
- _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
- _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
- _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
- _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
- _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
- _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
- _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
- _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
- _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
- _r->sr = SR_FD | SR_MMU; } while (0)
-#else
#define ELF_PLAT_INIT(_r, load_addr) \
do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
_r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
@@ -182,7 +160,6 @@
_r->regs[14] = 0; \
_r->sr = SR_FD; \
} while (0)
-#endif
#define SET_PERSONALITY(ex) \
set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
diff --git a/arch/sh/include/asm/extable.h b/arch/sh/include/asm/extable.h
index ed46f8b..5658d2b 100644
--- a/arch/sh/include/asm/extable.h
+++ b/arch/sh/include/asm/extable.h
@@ -4,8 +4,4 @@
#include <asm-generic/extable.h>
-#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
-#define ARCH_HAS_SEARCH_EXTABLE
-#endif
-
#endif
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
index e30348c..f38adc1 100644
--- a/arch/sh/include/asm/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
@@ -83,11 +83,7 @@
* the start of the fixmap, and leave one page empty
* at the top of mem..
*/
-#ifdef CONFIG_SUPERH32
#define FIXADDR_TOP (P4SEG - PAGE_SIZE)
-#else
-#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
-#endif
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 39c9ead..3924d91 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -115,12 +115,8 @@
__BUILD_MEMORY_STRING(__raw_, b, u8)
__BUILD_MEMORY_STRING(__raw_, w, u16)
-#ifdef CONFIG_SUPERH32
void __raw_writesl(void __iomem *addr, const void *data, int longlen);
void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-#else
-__BUILD_MEMORY_STRING(__raw_, l, u32)
-#endif
__BUILD_MEMORY_STRING(__raw_, q, u64)
@@ -328,7 +324,7 @@
#else
#define __ioremap(offset, size, prot) ((void __iomem *)(offset))
#define __ioremap_mode(offset, size, prot) ((void __iomem *)(offset))
-#define iounmap(addr) do { } while (0)
+static inline void iounmap(void __iomem *addr) {}
#endif /* CONFIG_MMU */
static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
index 90d6109..f7938fe 100644
--- a/arch/sh/include/asm/io_noioport.h
+++ b/arch/sh/include/asm/io_noioport.h
@@ -53,12 +53,34 @@
#define outw_p(x, addr) outw((x), (addr))
#define outl_p(x, addr) outl((x), (addr))
-#define insb(a, b, c) BUG()
-#define insw(a, b, c) BUG()
-#define insl(a, b, c) BUG()
+static inline void insb(unsigned long port, void *dst, unsigned long count)
+{
+ BUG();
+}
-#define outsb(a, b, c) BUG()
-#define outsw(a, b, c) BUG()
-#define outsl(a, b, c) BUG()
+static inline void insw(unsigned long port, void *dst, unsigned long count)
+{
+ BUG();
+}
+
+static inline void insl(unsigned long port, void *dst, unsigned long count)
+{
+ BUG();
+}
+
+static inline void outsb(unsigned long port, const void *src, unsigned long count)
+{
+ BUG();
+}
+
+static inline void outsw(unsigned long port, const void *src, unsigned long count)
+{
+ BUG();
+}
+
+static inline void outsl(unsigned long port, const void *src, unsigned long count)
+{
+ BUG();
+}
#endif /* __ASM_SH_IO_NOIOPORT_H */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index 8065a32..6d44c32 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -66,8 +66,5 @@
#endif
#include <asm-generic/irq.h>
-#ifdef CONFIG_CPU_SH5
-#include <cpu/irq.h>
-#endif
#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 2d09650..48e67d5 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -48,11 +48,7 @@
*/
#define MMU_VPN_MASK 0xfffff000
-#if defined(CONFIG_SUPERH32)
#include <asm/mmu_context_32.h>
-#else
-#include <asm/mmu_context_64.h>
-#endif
/*
* Get MMU context if needed.
@@ -74,14 +70,6 @@
*/
local_flush_tlb_all();
-#ifdef CONFIG_SUPERH64
- /*
- * The SH-5 cache uses the ASIDs, requiring both the I and D
- * cache to be flushed when the ASID is exhausted. Weak.
- */
- flush_cache_all();
-#endif
-
/*
* Fix version; Note that we avoid version #0
* to distinguish NO_CONTEXT.
diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
deleted file mode 100644
index bacafe0..0000000
--- a/arch/sh/include/asm/mmu_context_64.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMU_CONTEXT_64_H
-#define __ASM_SH_MMU_CONTEXT_64_H
-
-/*
- * sh64-specific mmu_context interface.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- */
-#include <cpu/registers.h>
-#include <asm/cacheflush.h>
-
-#define SR_ASID_MASK 0xffffffffff00ffffULL
-#define SR_ASID_SHIFT 16
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
- /* Well, at least free TLB entries */
- flush_tlb_mm(mm);
-}
-
-static inline unsigned long get_asid(void)
-{
- unsigned long long sr;
-
- asm volatile ("getcon " __SR ", %0\n\t"
- : "=r" (sr));
-
- sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
- return (unsigned long) sr;
-}
-
-/* Set ASID into SR */
-static inline void set_asid(unsigned long asid)
-{
- unsigned long long sr, pc;
-
- asm volatile ("getcon " __SR ", %0" : "=r" (sr));
-
- sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
-
- /*
- * It is possible that this function may be inlined and so to avoid
- * the assembler reporting duplicate symbols we make use of the
- * gas trick of generating symbols using numerics and forward
- * reference.
- */
- asm volatile ("movi 1, %1\n\t"
- "shlli %1, 28, %1\n\t"
- "or %0, %1, %1\n\t"
- "putcon %1, " __SR "\n\t"
- "putcon %0, " __SSR "\n\t"
- "movi 1f, %1\n\t"
- "ori %1, 1 , %1\n\t"
- "putcon %1, " __SPC "\n\t"
- "rte\n"
- "1:\n\t"
- : "=r" (sr), "=r" (pc) : "0" (sr));
-}
-
-/* arch/sh/kernel/cpu/sh5/entry.S */
-extern unsigned long switch_and_save_asid(unsigned long new_asid);
-
-/* No spare register to twiddle, so use a software cache */
-extern pgd_t *mmu_pdtp_cache;
-
-#define set_TTB(pgd) (mmu_pdtp_cache = (pgd))
-#define get_TTB() (mmu_pdtp_cache)
-
-#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index ea8d68f..eca5daa 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -35,8 +35,6 @@
#define HPAGE_SHIFT 22
#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
#define HPAGE_SHIFT 26
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define HPAGE_SHIFT 29
#endif
#ifdef CONFIG_HUGETLB_PAGE
@@ -82,18 +80,12 @@
((x).pte_low | ((unsigned long long)(x).pte_high << 32))
#define __pte(x) \
({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#elif defined(CONFIG_SUPERH32)
+#else
typedef struct { unsigned long pte_low; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t;
typedef struct { unsigned long pgd; } pgd_t;
#define pte_val(x) ((x).pte_low)
#define __pte(x) ((pte_t) { (x) } )
-#else
-typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low)
-#define __pte(x) ((pte_t) { (x) } )
#endif
#define pgd_val(x) ((x).pgd)
@@ -191,15 +183,4 @@
*/
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-#ifdef CONFIG_SUPERH64
-/*
- * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
- * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is guaranteed by
- * virtue of L1_CACHE_BYTES, requiring this to only be special cased
- * for slab caches.
- */
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index cbd0f3c..02d9364 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -76,18 +76,10 @@
#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
-#ifdef CONFIG_SUPERH32
#define VMALLOC_START (P3SEG)
-#else
-#define VMALLOC_START (0xf0000000)
-#endif
#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
-#if defined(CONFIG_SUPERH32)
#include <asm/pgtable_32.h>
-#else
-#include <asm/pgtable_64.h>
-#endif
/*
* SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
@@ -159,15 +151,6 @@
prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
return __pte_access_permitted(pte, prot);
}
-#elif defined(CONFIG_SUPERH64)
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT | _PAGE_USER | _PAGE_READ;
-
- if (write)
- prot |= _PAGE_WRITE;
- return __pte_access_permitted(pte, prot);
-}
#else
static inline bool pte_access_permitted(pte_t pte, bool write)
{
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
deleted file mode 100644
index 27cc282..0000000
--- a/arch/sh/include/asm/pgtable_64.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_64_H
-#define __ASM_SH_PGTABLE_64_H
-
-/*
- * include/asm-sh/pgtable_64.h
- *
- * This file contains the functions and defines necessary to modify and use
- * the SuperH page table tree.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- */
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/*
- * Error outputs.
- */
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Table setting routines. Used within arch/mm only.
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
-{
- unsigned long long x = ((unsigned long long) pteval.pte_low);
- unsigned long long *xp = (unsigned long long *) pteptr;
- /*
- * Sign-extend based on NPHYS.
- */
- *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
-}
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * PGD defines. Top level.
- */
-
-/* To find an entry in a generic PGD. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-
-/* To find an entry in a kernel PGD. */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-/* #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) */
-
-/*
- * PMD level access routines. Same notes as above.
- */
-#define _PMD_EMPTY 0x0
-/* Either the PMD is empty or present, it's not paged out */
-#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT)
-#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
-#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY)
-#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pmd_page_vaddr(pmd_entry) \
- ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
-
-#define pmd_page(pmd) \
- (virt_to_page(pmd_val(pmd)))
-
-/* PMD to PTE dereferencing */
-#define pte_index(address) \
- ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define __pte_offset(address) pte_index(address)
-
-#define pte_offset_kernel(dir, addr) \
- ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
-
-#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr)
-#define pte_unmap(pte) do { } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * PTEL coherent flags.
- * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
- */
-/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
- positions, to avoid expensive bit shuffling on every refill. The remaining
- bits are used for s/w purposes and masked out on each refill.
-
- Note, the PTE slots are used to hold data of type swp_entry_t when a page is
- swapped out. Only the _PAGE_PRESENT flag is significant when the page is
- swapped out, and it must be placed so that it doesn't overlap either the
- type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type
- at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This
- scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit
- [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
- into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */
-#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */
-#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
-#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */
-#define _PAGE_PRESENT 0x004 /* software: page referenced */
-#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */
-#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */
-#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */
-#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */
-#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */
-#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */
-#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */
-#define _PAGE_DIRTY 0x400 /* software: page accessed in write */
-#define _PAGE_ACCESSED 0x800 /* software: page referenced */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
-
-/*
- * We can use the sign-extended bits in the PTEL to get 32 bits of
- * software flags. This works for now because no implementations uses
- * anything above the PPN field.
- */
-#define _PAGE_WIRED _PAGE_EXT(0x001) /* software: wire the tlb entry */
-#define _PAGE_SPECIAL _PAGE_EXT(0x002)
-
-#define _PAGE_CLEAR_FLAGS (_PAGE_PRESENT | _PAGE_SHARED | \
- _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED)
-
-/* Mask which drops software flags */
-#define _PAGE_FLAGS_HARDWARE_MASK (NEFF_MASK & ~(_PAGE_CLEAR_FLAGS))
-
-/*
- * HugeTLB support
- */
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define _PAGE_SZHUGE (_PAGE_SIZE0)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define _PAGE_SZHUGE (_PAGE_SIZE1)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE (0)
-#endif
-
-/*
- * Default flags for a Kernel page.
- * This is fundametally also SHARED because the main use of this define
- * (other than for PGD/PMD entries) is for the VMALLOC pool which is
- * contextless.
- *
- * _PAGE_EXECUTE is required for modules
- *
- */
-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
- _PAGE_EXECUTE | \
- _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_SHARED)
-
-/* Default flags for a User page */
-#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER)
-
-#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_SPECIAL)
-
-/*
- * We have full permissions (Read/Write/Execute/Shared).
- */
-#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \
- _PAGE_CACHABLE | _PAGE_ACCESSED)
-
-#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
-#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
- _PAGE_SHARED)
-#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
-
-/*
- * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
- * protection mode for the stack.
- */
-#define PAGE_COPY PAGE_EXECREAD
-
-#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ)
-#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE)
-#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \
- _PAGE_WRITE | _PAGE_EXECUTE)
-#define PAGE_KERNEL __pgprot(_KERNPG_TABLE)
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
- _PAGE_EXECUTE | _PAGE_ACCESSED | \
- _PAGE_DIRTY | _PAGE_SHARED)
-
-/* Make it a device mapping for maximum safety (e.g. for mapping device
- registers into user-space via /dev/map). */
-#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-/*
- * PTE level access routines.
- *
- * Note1:
- * It's the tree walk leaf. This is physical address to be stored.
- *
- * Note 2:
- * Regarding the choice of _PTE_EMPTY:
-
- We must choose a bit pattern that cannot be valid, whether or not the page
- is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped
- out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
- left for us to select. If we force bit[7]==0 when swapped out, we could use
- the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if
- we force bit[7]==1 when swapped out, we can use all zeroes to indicate
- empty. This is convenient, because the page tables get cleared to zero
- when they are allocated.
-
- */
-#define _PTE_EMPTY 0x0
-#define pte_present(x) (pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
-#define pte_none(x) (pte_val(x) == _PTE_EMPTY)
-
-/*
- * Some definitions to translate between mem_map, PTEs, and page
- * addresses:
- */
-
-/*
- * Given a PTE, return the index of the mem_map[] entry corresponding
- * to the page frame the PTE. Get the absolute physical address, make
- * a relative physical address and translate it to an index.
- */
-#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \
- __MEMORY_START) >> PAGE_SHIFT)
-
-/*
- * Given a PTE, return the "struct page *".
- */
-#define pte_page(x) (mem_map + pte_pagenr(x))
-
-/*
- * Return number of (down rounded) MB corresponding to x pages.
- */
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
-
-/*
- * The following have defined behavior only work if pte_present() is true.
- */
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
-static inline int pte_special(pte_t pte){ return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SPECIAL)); return pte; }
-
-/*
- * Conversion functions: convert a page and protection to a page entry.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page,pgprot) \
-({ \
- pte_t __pte; \
- \
- set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \
- __MEMORY_START | pgprot_val((pgprot)))); \
- __pte; \
-})
-
-/*
- * This takes a (absolute) physical page address that is used
- * by the remapping functions
- */
-#define mk_pte_phys(physpage, pgprot) \
-({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-
-/* Encode and decode a swap entry */
-#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c))
-#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#endif /* !__ASSEMBLY__ */
-
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#endif /* __ASM_SH_PGTABLE_64_H */
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
index 0d670fd..f8982b7 100644
--- a/arch/sh/include/asm/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
@@ -1,6 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-# ifdef CONFIG_SUPERH32
-# include <asm/posix_types_32.h>
-# else
-# include <asm/posix_types_64.h>
-# endif
+#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 6fbf8c8..3820d69 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -39,9 +39,6 @@
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
- /* SH-5 types */
- CPU_SH5_101, CPU_SH5_103,
-
/* Unknown subtype */
CPU_SH_NONE
};
@@ -53,7 +50,6 @@
CPU_FAMILY_SH4,
CPU_FAMILY_SH4A,
CPU_FAMILY_SH4AL_DSP,
- CPU_FAMILY_SH5,
CPU_FAMILY_UNKNOWN,
};
@@ -167,18 +163,12 @@
*/
#ifdef CONFIG_CPU_SH2A
extern unsigned int instruction_size(unsigned int insn);
-#elif defined(CONFIG_SUPERH32)
-#define instruction_size(insn) (2)
#else
-#define instruction_size(insn) (4)
+#define instruction_size(insn) (2)
#endif
#endif /* __ASSEMBLY__ */
-#ifdef CONFIG_SUPERH32
-# include <asm/processor_32.h>
-#else
-# include <asm/processor_64.h>
-#endif
+#include <asm/processor_32.h>
#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
deleted file mode 100644
index 53efc9f..0000000
--- a/arch/sh/include/asm/processor_64.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PROCESSOR_64_H
-#define __ASM_SH_PROCESSOR_64_H
-
-/*
- * include/asm-sh/processor_64.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <cpu/registers.h>
-
-#endif
-
-/*
- * User space process size: 2GB - 4k.
- */
-#define TASK_SIZE 0x7ffff000UL
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- * When it's set, it means the processor doesn't have right to use FPU,
- * and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- * Interrupt level mask
- *
- * STEP-bit:
- * Single step bit
- *
- */
-#if defined(CONFIG_SH64_SR_WATCH)
-#define SR_MMU 0x84000000
-#else
-#define SR_MMU 0x80000000
-#endif
-
-#define SR_IMASK 0x000000f0
-#define SR_FD 0x00008000
-#define SR_SSTEP 0x08000000
-
-#ifndef __ASSEMBLY__
-
-/*
- * FPU structure and data : require 8-byte alignment as we need to access it
- with fld.p, fst.p
- */
-
-struct sh_fpu_hard_struct {
- unsigned long fp_regs[64];
- unsigned int fpscr;
- /* long status; * software status information */
-};
-
-/* Dummy fpu emulator */
-struct sh_fpu_soft_struct {
- unsigned long fp_regs[64];
- unsigned int fpscr;
- unsigned char lookahead;
- unsigned long entry_pc;
-};
-
-union thread_xstate {
- struct sh_fpu_hard_struct hardfpu;
- struct sh_fpu_soft_struct softfpu;
- /*
- * The structure definitions only produce 32 bit alignment, yet we need
- * to access them using 64 bit load/store as well.
- */
- unsigned long long alignment_dummy;
-};
-
-struct thread_struct {
- unsigned long sp;
- unsigned long pc;
-
- /* Various thread flags, see SH_THREAD_xxx */
- unsigned long flags;
-
- /* This stores the address of the pt_regs built during a context
- switch, or of the register save area built for a kernel mode
- exception. It is used for backtracing the stack of a sleeping task
- or one that traps in kernel mode. */
- struct pt_regs *kregs;
- /* This stores the address of the pt_regs constructed on entry from
- user mode. It is a fixed value over the lifetime of a process, or
- NULL for a kernel thread. */
- struct pt_regs *uregs;
-
- unsigned long address;
- /* Hardware debugging registers may come here */
-
- /* floating point info */
- union thread_xstate *xstate;
-
- /*
- * fpu_counter contains the number of consecutive context switches
- * that the FPU is used. If this is over a threshold, the lazy fpu
- * saving becomes unlazy to save the trap. This is an unsigned char
- * so that after 256 times the counter wraps and the behavior turns
- * lazy again; this to deal with bursty apps that only use FPU for
- * a short time
- */
- unsigned char fpu_counter;
-};
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-
-#define INIT_THREAD { \
- .sp = sizeof(init_stack) + \
- (long) &init_stack, \
- .pc = 0, \
- .kregs = &fake_swapper_regs, \
- .uregs = NULL, \
- .address = 0, \
- .flags = 0, \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define SR_USER (SR_MMU | SR_FD)
-
-#define start_thread(_regs, new_pc, new_sp) \
- _regs->sr = SR_USER; /* User mode. */ \
- _regs->pc = new_pc - 4; /* Compensate syscall exit */ \
- _regs->pc |= 1; /* Set SHmedia ! */ \
- _regs->regs[18] = 0; \
- _regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/*
- * FPU lazy state save handling.
- */
-
-static inline void disable_fpu(void)
-{
- unsigned long long __dummy;
-
- /* Set FD flag in SR */
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "or %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy)
- : "r" (SR_FD));
-}
-
-static inline void enable_fpu(void)
-{
- unsigned long long __dummy;
-
- /* Clear out FD flag in SR */
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy)
- : "r" (~SR_FD));
-}
-
-/* Round to nearest, no exceptions on inexact, overflow, underflow,
- zero-divide, invalid. Configure option for whether to flush denorms to
- zero, or except if a denorm is encountered. */
-#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
-#define FPSCR_INIT 0x00040000
-#else
-#define FPSCR_INIT 0x00000000
-#endif
-
-#ifdef CONFIG_SH_FPU
-/* Initialise the FP state of a task */
-void fpinit(struct sh_fpu_hard_struct *fpregs);
-#else
-#define fpinit(fpregs) do { } while (0)
-#endif
-
-extern struct task_struct *last_task_used_math;
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk) (tsk->thread.pc)
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) ((tsk)->thread.pc)
-#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h
deleted file mode 100644
index 6ee0822..0000000
--- a/arch/sh/include/asm/ptrace_64.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PTRACE_64_H
-#define __ASM_SH_PTRACE_64_H
-
-#include <uapi/asm/ptrace_64.h>
-
-
-#define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7])
-static inline long regs_return_value(struct pt_regs *regs)
-{
- return regs->regs[3];
-}
-
-#endif /* __ASM_SH_PTRACE_64_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
index 84fc5ed..0f6331e 100644
--- a/arch/sh/include/asm/string.h
+++ b/arch/sh/include/asm/string.h
@@ -1,6 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_SUPERH32
-# include <asm/string_32.h>
-#else
-# include <asm/string_64.h>
-#endif
+#include <asm/string_32.h>
diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h
deleted file mode 100644
index d51d615..0000000
--- a/arch/sh/include/asm/string_64.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STRING_64_H
-#define __ASM_SH_STRING_64_H
-
-#ifdef __KERNEL__
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *dest, const void *src, size_t count);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#define __HAVE_ARCH_STRCPY
-extern char *strcpy(char *__dest, const char *__src);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_STRING_64_H */
diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h
index 9eec80a..bd139bc 100644
--- a/arch/sh/include/asm/switch_to.h
+++ b/arch/sh/include/asm/switch_to.h
@@ -4,13 +4,4 @@
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
-#ifndef __ASM_SH_SWITCH_TO_H
-#define __ASM_SH_SWITCH_TO_H
-
-#ifdef CONFIG_SUPERH32
-# include <asm/switch_to_32.h>
-#else
-# include <asm/switch_to_64.h>
-#endif
-
-#endif /* __ASM_SH_SWITCH_TO_H */
+#include <asm/switch_to_32.h>
diff --git a/arch/sh/include/asm/switch_to_64.h b/arch/sh/include/asm/switch_to_64.h
deleted file mode 100644
index 2dbf231..0000000
--- a/arch/sh/include/asm/switch_to_64.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#ifndef __ASM_SH_SWITCH_TO_64_H
-#define __ASM_SH_SWITCH_TO_64_H
-
-struct thread_struct;
-struct task_struct;
-
-/*
- * switch_to() should switch tasks to task nr n, first
- */
-struct task_struct *sh64_switch_to(struct task_struct *prev,
- struct thread_struct *prev_thread,
- struct task_struct *next,
- struct thread_struct *next_thread);
-
-#define switch_to(prev,next,last) \
-do { \
- if (last_task_used_math != next) { \
- struct pt_regs *regs = next->thread.uregs; \
- if (regs) regs->sr |= SR_FD; \
- } \
- last = sh64_switch_to(prev, &prev->thread, next, \
- &next->thread); \
-} while (0)
-
-
-#endif /* __ASM_SH_SWITCH_TO_64_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
index 90ba000..570699e 100644
--- a/arch/sh/include/asm/syscall.h
+++ b/arch/sh/include/asm/syscall.h
@@ -4,10 +4,6 @@
extern const unsigned long sys_call_table[];
-#ifdef CONFIG_SUPERH32
-# include <asm/syscall_32.h>
-#else
-# include <asm/syscall_64.h>
-#endif
+#include <asm/syscall_32.h>
#endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscall_64.h b/arch/sh/include/asm/syscall_64.h
deleted file mode 100644
index 72efcbc..0000000
--- a/arch/sh/include/asm/syscall_64.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_64_H
-#define __ASM_SH_SYSCALL_64_H
-
-#include <uapi/linux/audit.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-
-/* The system call number is given by the user in R9 */
-static inline long syscall_get_nr(struct task_struct *task,
- struct pt_regs *regs)
-{
- return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
- struct pt_regs *regs)
-{
- /*
- * XXX: This needs some thought. On SH we don't
- * save away the original R9 value anywhere.
- */
-}
-
-static inline long syscall_get_error(struct task_struct *task,
- struct pt_regs *regs)
-{
- return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
- struct pt_regs *regs)
-{
- return regs->regs[9];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
- struct pt_regs *regs,
- int error, long val)
-{
- if (error)
- regs->regs[9] = -error;
- else
- regs->regs[9] = val;
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *args)
-{
- memcpy(args, ®s->regs[2], 6 * sizeof(args[0]));
-}
-
-static inline void syscall_set_arguments(struct task_struct *task,
- struct pt_regs *regs,
- const unsigned long *args)
-{
- memcpy(®s->regs[2], args, 6 * sizeof(args[0]));
-}
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
- int arch = AUDIT_ARCH_SH;
-
-#ifdef CONFIG_64BIT
- arch |= __AUDIT_ARCH_64BIT;
-#endif
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- arch |= __AUDIT_ARCH_LE;
-#endif
-
- return arch;
-}
-#endif /* __ASM_SH_SYSCALL_64_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
index 995ef04..3871053 100644
--- a/arch/sh/include/asm/syscalls.h
+++ b/arch/sh/include/asm/syscalls.h
@@ -2,8 +2,6 @@
#ifndef __ASM_SH_SYSCALLS_H
#define __ASM_SH_SYSCALLS_H
-#ifdef __KERNEL__
-
asmlinkage int old_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
int fd, unsigned long off);
@@ -11,11 +9,6 @@
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff);
-#ifdef CONFIG_SUPERH32
-# include <asm/syscalls_32.h>
-#else
-# include <asm/syscalls_64.h>
-#endif
+#include <asm/syscalls_32.h>
-#endif /* __KERNEL__ */
#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/arch/sh/include/asm/syscalls_64.h b/arch/sh/include/asm/syscalls_64.h
deleted file mode 100644
index df42656c..0000000
--- a/arch/sh/include/asm/syscalls_64.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_64_H
-#define __ASM_SH_SYSCALLS_64_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-struct pt_regs;
-
-/* Misc syscall related bits */
-asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_SYSCALLS_64_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index cf5c792..6404be6 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -70,9 +70,7 @@
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
-#if defined(CONFIG_SUPERH64)
- __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti));
-#elif defined(CONFIG_CPU_HAS_SR_RB)
+#if defined(CONFIG_CPU_HAS_SR_RB)
__asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti));
#else
unsigned long __dummy;
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index bc77f3d..360f713 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -2,10 +2,6 @@
#ifndef __ASM_SH_TLB_H
#define __ASM_SH_TLB_H
-#ifdef CONFIG_SUPERH64
-# include <asm/tlb_64.h>
-#endif
-
#ifndef __ASSEMBLY__
#include <linux/pagemap.h>
@@ -14,7 +10,7 @@
#include <asm-generic/tlb.h>
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
+#if defined(CONFIG_CPU_SH4)
extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
extern void tlb_unwire_entry(void);
#else
diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h
deleted file mode 100644
index 59fa0a2..0000000
--- a/arch/sh/include/asm/tlb_64.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/tlb_64.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_TLB_64_H
-#define __ASM_SH_TLB_64_H
-
-/* ITLB defines */
-#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */
-#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */
-
-/* DTLB defines */
-#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */
-#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */
-
-#ifndef __ASSEMBLY__
-
-/**
- * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
- *
- * @tlb: TLB entry
- */
-#define for_each_dtlb_entry(tlb) \
- for (tlb = cpu_data->dtlb.first; \
- tlb <= cpu_data->dtlb.last; \
- tlb += cpu_data->dtlb.step)
-
-/**
- * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
- *
- * @tlb: TLB entry
- */
-#define for_each_itlb_entry(tlb) \
- for (tlb = cpu_data->itlb.first; \
- tlb <= cpu_data->itlb.last; \
- tlb += cpu_data->itlb.step)
-
-/**
- * __flush_tlb_slot - Flushes TLB slot @slot.
- *
- * @slot: Address of TLB slot.
- */
-static inline void __flush_tlb_slot(unsigned long long slot)
-{
- __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
-}
-
-#ifdef CONFIG_MMU
-/* arch/sh64/mm/tlb.c */
-int sh64_tlb_init(void);
-unsigned long long sh64_next_free_dtlb_entry(void);
-unsigned long long sh64_get_wired_dtlb_entry(void);
-int sh64_put_wired_dtlb_entry(unsigned long long entry);
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
- unsigned long asid, unsigned long paddr);
-void sh64_teardown_tlb_slot(unsigned long long config_addr);
-#else
-#define sh64_tlb_init() do { } while (0)
-#define sh64_next_free_dtlb_entry() (0)
-#define sh64_get_wired_dtlb_entry() (0)
-#define sh64_put_wired_dtlb_entry(entry) do { } while (0)
-#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0)
-#define sh64_teardown_tlb_slot(addr) do { } while (0)
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_64_H */
diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h
index 8844ed0..ba831bc 100644
--- a/arch/sh/include/asm/traps.h
+++ b/arch/sh/include/asm/traps.h
@@ -4,11 +4,7 @@
#include <linux/compiler.h>
-#ifdef CONFIG_SUPERH32
# include <asm/traps_32.h>
-#else
-# include <asm/traps_64.h>
-#endif
BUILD_TRAP_HANDLER(address_error);
BUILD_TRAP_HANDLER(debug);
diff --git a/arch/sh/include/asm/traps_64.h b/arch/sh/include/asm/traps_64.h
deleted file mode 100644
index f28db6df..0000000
--- a/arch/sh/include/asm/traps_64.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#ifndef __ASM_SH_TRAPS_64_H
-#define __ASM_SH_TRAPS_64_H
-
-#include <cpu/registers.h>
-
-extern void phys_stext(void);
-
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- \
- __asm__ __volatile__ ( \
- "getcon " __EXPEVT ", %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-
-static inline void trigger_address_error(void)
-{
- phys_stext();
-}
-
-#define BUILD_TRAP_HANDLER(name) \
-asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
-#define TRAP_HANDLER_DECL
-
-#endif /* __ASM_SH_TRAPS_64_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index df96c51..68eb24a 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -9,13 +9,8 @@
*/
#ifndef __ASSEMBLY__
-#ifdef CONFIG_SUPERH32
typedef u16 insn_size_t;
typedef u32 reg_size_t;
-#else
-typedef u32 insn_size_t;
-typedef u64 reg_size_t;
-#endif
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 5fe751a..73f3b48 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -96,11 +96,7 @@
__pu_err; \
})
-#ifdef CONFIG_SUPERH32
# include <asm/uaccess_32.h>
-#else
-# include <asm/uaccess_64.h>
-#endif
extern long strncpy_from_user(char *dest, const char __user *src, long count);
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
deleted file mode 100644
index 0c19d02..0000000
--- a/arch/sh/include/asm/uaccess_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UACCESS_64_H
-#define __ASM_SH_UACCESS_64_H
-
-/*
- * include/asm-sh/uaccess_64.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- */
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- x = 0; \
- switch (size) { \
- case 1: \
- retval = __get_user_asm_b((void *)&x, \
- (long)ptr); \
- break; \
- case 2: \
- retval = __get_user_asm_w((void *)&x, \
- (long)ptr); \
- break; \
- case 4: \
- retval = __get_user_asm_l((void *)&x, \
- (long)ptr); \
- break; \
- case 8: \
- retval = __get_user_asm_q((void *)&x, \
- (long)ptr); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- retval = __put_user_asm_b((void *)&x, \
- (__force long)ptr); \
- break; \
- case 2: \
- retval = __put_user_asm_w((void *)&x, \
- (__force long)ptr); \
- break; \
- case 4: \
- retval = __put_user_asm_l((void *)&x, \
- (__force long)ptr); \
- break; \
- case 8: \
- retval = __put_user_asm_q((void *)&x, \
- (__force long)ptr); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
index 9c7d9d9..d6e1262 100644
--- a/arch/sh/include/asm/unistd.h
+++ b/arch/sh/include/asm/unistd.h
@@ -1,9 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
-# ifdef CONFIG_SUPERH32
-# include <asm/unistd_32.h>
-# else
-# include <asm/unistd_64.h>
-# endif
+#include <asm/unistd_32.h>
#define NR_syscalls __NR_syscalls
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
index e97f2ef..7dfd3f6 100644
--- a/arch/sh/include/asm/user.h
+++ b/arch/sh/include/asm/user.h
@@ -28,19 +28,12 @@
* to write an integer number of pages.
*/
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct user_fpu_struct {
- unsigned long fp_regs[32];
- unsigned int fpscr;
-};
-#else
struct user_fpu_struct {
unsigned long fp_regs[16];
unsigned long xfp_regs[16];
unsigned long fpscr;
unsigned long fpul;
};
-#endif
struct user {
struct pt_regs regs; /* entire machine state */
diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h
index 13d8eaa9..5b2057c 100644
--- a/arch/sh/include/asm/vermagic.h
+++ b/arch/sh/include/asm/vermagic.h
@@ -10,8 +10,6 @@
# define MODULE_PROC_FAMILY "SH3LE "
# elif defined CONFIG_CPU_SH4
# define MODULE_PROC_FAMILY "SH4LE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5LE "
# else
# error unknown processor family
# endif
@@ -22,8 +20,6 @@
# define MODULE_PROC_FAMILY "SH3BE "
# elif defined CONFIG_CPU_SH4
# define MODULE_PROC_FAMILY "SH4BE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5BE "
# else
# error unknown processor family
# endif
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
index 9929556..8d96c4f 100644
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -15,12 +15,4 @@
#define DWARF_EH_FRAME
#endif
-#ifdef CONFIG_SUPERH64
-#define EXTRA_TEXT \
- *(.text64) \
- *(.text..SHmedia32)
-#else
-#define EXTRA_TEXT
-#endif
-
#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
deleted file mode 100644
index 6dd1e72..0000000
--- a/arch/sh/include/cpu-sh5/cpu/addrspace.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
-#define __ASM_SH_CPU_SH5_ADDRSPACE_H
-
-#define PHYS_PERIPHERAL_BLOCK 0x09000000
-#define PHYS_DMAC_BLOCK 0x0e000000
-#define PHYS_PCI_BLOCK 0x60000000
-#define PHYS_EMI_BLOCK 0xff000000
-
-/* No segmentation.. */
-
-#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
deleted file mode 100644
index ef49538..0000000
--- a/arch/sh/include/cpu-sh5/cpu/cache.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_CACHE_H
-#define __ASM_SH_CPU_SH5_CACHE_H
-
-/*
- * include/asm-sh/cpu-sh5/cache.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-
-#define L1_CACHE_SHIFT 5
-
-/* Valid and Dirty bits */
-#define SH_CACHE_VALID (1LL<<0)
-#define SH_CACHE_UPDATED (1LL<<57)
-
-/* Unimplemented compat bits.. */
-#define SH_CACHE_COMBINED 0
-#define SH_CACHE_ASSOC 0
-
-/* Cache flags */
-#define SH_CACHE_MODE_WT (1LL<<0)
-#define SH_CACHE_MODE_WB (1LL<<1)
-
-/*
- * Control Registers.
- */
-#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */
-#define ICCR_REG0 0 /* Register 0 offset */
-#define ICCR_REG1 1 /* Register 1 offset */
-#define ICCR0 ICCR_BASE+ICCR_REG0
-#define ICCR1 ICCR_BASE+ICCR_REG1
-
-#define ICCR0_OFF 0x0 /* Set ICACHE off */
-#define ICCR0_ON 0x1 /* Set ICACHE on */
-#define ICCR0_ICI 0x2 /* Invalidate all in IC */
-
-#define ICCR1_NOLOCK 0x0 /* Set No Locking */
-
-#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */
-#define OCCR_REG0 0 /* Register 0 offset */
-#define OCCR_REG1 1 /* Register 1 offset */
-#define OCCR0 OCCR_BASE+OCCR_REG0
-#define OCCR1 OCCR_BASE+OCCR_REG1
-
-#define OCCR0_OFF 0x0 /* Set OCACHE off */
-#define OCCR0_ON 0x1 /* Set OCACHE on */
-#define OCCR0_OCI 0x2 /* Invalidate all in OC */
-#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */
-#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */
-
-#define OCCR1_NOLOCK 0x0 /* Set No Locking */
-
-/*
- * SH-5
- * A bit of description here, for neff=32.
- *
- * |<--- tag (19 bits) --->|
- * +-----------------------------+-----------------+------+----------+------+
- * | | | ways |set index |offset|
- * +-----------------------------+-----------------+------+----------+------+
- * ^ 2 bits 8 bits 5 bits
- * +- Bit 31
- *
- * Cacheline size is based on offset: 5 bits = 32 bytes per line
- * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
- * have a broader space for registers. These are outlined by
- * CACHE_?C_*_STEP below.
- *
- */
-
-/* Instruction cache */
-#define CACHE_IC_ADDRESS_ARRAY 0x01000000
-
-/* Operand Cache */
-#define CACHE_OC_ADDRESS_ARRAY 0x01800000
-
-/* These declarations relate to cache 'synonyms' in the operand cache. A
- 'synonym' occurs where effective address bits overlap between those used for
- indexing the cache sets and those passed to the MMU for translation. In the
- case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
-
-#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */
-#define CACHE_OC_SYN_SHIFT 12
-/* Mask to select synonym bit(s) */
-#define CACHE_OC_SYN_MASK (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
-
-/*
- * Instruction cache can't be invalidated based on physical addresses.
- * No Instruction Cache defines required, then.
- */
-
-#endif /* __ASM_SH_CPU_SH5_CACHE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
deleted file mode 100644
index 4aa6ac5..0000000
--- a/arch/sh/include/cpu-sh5/cpu/irq.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_IRQ_H
-#define __ASM_SH_CPU_SH5_IRQ_H
-
-/*
- * include/asm-sh/cpu-sh5/irq.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0 0
-#define IRQ_IRL1 1
-#define IRQ_IRL2 2
-#define IRQ_IRL3 3
-
-#define IRQ_INTA 4
-#define IRQ_INTB 5
-#define IRQ_INTC 6
-#define IRQ_INTD 7
-
-#define IRQ_SERR 12
-#define IRQ_ERR 13
-#define IRQ_PWR3 14
-#define IRQ_PWR2 15
-#define IRQ_PWR1 16
-#define IRQ_PWR0 17
-
-#define IRQ_DMTE0 18
-#define IRQ_DMTE1 19
-#define IRQ_DMTE2 20
-#define IRQ_DMTE3 21
-#define IRQ_DAERR 22
-
-#define IRQ_TUNI0 32
-#define IRQ_TUNI1 33
-#define IRQ_TUNI2 34
-#define IRQ_TICPI2 35
-
-#define IRQ_ATI 36
-#define IRQ_PRI 37
-#define IRQ_CUI 38
-
-#define IRQ_ERI 39
-#define IRQ_RXI 40
-#define IRQ_BRI 41
-#define IRQ_TXI 42
-
-#define IRQ_ITI 63
-
-#define NR_INTC_IRQS 64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS 32
-#define START_EXT_IRQS 64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ (START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ (START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD (START_EXT_IRQS + 7)
-#define IRQ_PCMCIA (0)
-
-#else
-#define NR_EXT_IRQS 0
-#endif
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ IRQ_TUNI0
-#define RTC_IRQ IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define NO_PRIORITY 0 /* Disabled */
-#define TIMER_PRIORITY 2
-#define RTC_PRIORITY TIMER_PRIORITY
-#define SCIF_PRIORITY 3
-#define INTD_PRIORITY 3
-#define IRL3_PRIORITY 4
-#define INTC_PRIORITY 6
-#define IRL2_PRIORITY 7
-#define INTB_PRIORITY 9
-#define IRL1_PRIORITY 10
-#define INTA_PRIORITY 12
-#define IRL0_PRIORITY 13
-#define TOP_PRIORITY 15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
deleted file mode 100644
index 23c53be..0000000
--- a/arch/sh/include/cpu-sh5/cpu/mmu_context.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-
-/* Common defines */
-#define TLB_STEP 0x00000010
-#define TLB_PTEH 0x00000000
-#define TLB_PTEL 0x00000008
-
-/* PTEH defines */
-#define PTEH_ASID_SHIFT 2
-#define PTEH_VALID 0x0000000000000001
-#define PTEH_SHARED 0x0000000000000002
-#define PTEH_MATCH_ASID 0x00000000000003ff
-
-#ifndef __ASSEMBLY__
-/* This has to be a common function because the next location to fill
- * information is shared. */
-extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
deleted file mode 100644
index 372c1e1..0000000
--- a/arch/sh/include/cpu-sh5/cpu/registers.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
-#define __ASM_SH_CPU_SH5_REGISTERS_H
-
-/*
- * include/asm-sh/cpu-sh5/registers.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 Richard Curnow
- */
-
-#ifdef __ASSEMBLY__
-/* =====================================================================
-**
-** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
-** Assigns symbolic names to control & target registers.
-*/
-
-/*
- * Define some useful aliases for control registers.
- */
-#define SR cr0
-#define SSR cr1
-#define PSSR cr2
- /* cr3 UNDEFINED */
-#define INTEVT cr4
-#define EXPEVT cr5
-#define PEXPEVT cr6
-#define TRA cr7
-#define SPC cr8
-#define PSPC cr9
-#define RESVEC cr10
-#define VBR cr11
- /* cr12 UNDEFINED */
-#define TEA cr13
- /* cr14-cr15 UNDEFINED */
-#define DCR cr16
-#define KCR0 cr17
-#define KCR1 cr18
- /* cr19-cr31 UNDEFINED */
- /* cr32-cr61 RESERVED */
-#define CTC cr62
-#define USR cr63
-
-/*
- * ABI dependent registers (general purpose set)
- */
-#define RET r2
-#define ARG1 r2
-#define ARG2 r3
-#define ARG3 r4
-#define ARG4 r5
-#define ARG5 r6
-#define ARG6 r7
-#define SP r15
-#define LINK r18
-#define ZERO r63
-
-/*
- * Status register defines: used only by assembly sources (and
- * syntax independednt)
- */
-#define SR_RESET_VAL 0x0000000050008000
-#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */
-#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */
-
-#if defined (CONFIG_SH64_SR_WATCH)
-#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */
-#else
-#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */
-#endif
-
-#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */
-#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */
-
-#else /* Not __ASSEMBLY__ syntax */
-
-/*
-** Stringify reg. name
-*/
-#define __str(x) #x
-
-/* Stringify control register names for use in inline assembly */
-#define __SR __str(SR)
-#define __SSR __str(SSR)
-#define __PSSR __str(PSSR)
-#define __INTEVT __str(INTEVT)
-#define __EXPEVT __str(EXPEVT)
-#define __PEXPEVT __str(PEXPEVT)
-#define __TRA __str(TRA)
-#define __SPC __str(SPC)
-#define __PSPC __str(PSPC)
-#define __RESVEC __str(RESVEC)
-#define __VBR __str(VBR)
-#define __TEA __str(TEA)
-#define __DCR __str(DCR)
-#define __KCR0 __str(KCR0)
-#define __KCR1 __str(KCR1)
-#define __CTC __str(CTC)
-#define __USR __str(USR)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
deleted file mode 100644
index d7e25d4..0000000
--- a/arch/sh/include/cpu-sh5/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_RTC_H
-#define __ASM_SH_CPU_SH5_RTC_H
-
-#define rtc_reg_size sizeof(u32)
-#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH5_RTC_H */
diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h
index 2644fdd..adc998a 100644
--- a/arch/sh/include/uapi/asm/posix_types.h
+++ b/arch/sh/include/uapi/asm/posix_types.h
@@ -1,8 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __KERNEL__
-# ifdef __SH5__
-# include <asm/posix_types_64.h>
-# else
-# include <asm/posix_types_32.h>
-# endif
-#endif /* __KERNEL__ */
+#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/uapi/asm/posix_types_64.h b/arch/sh/include/uapi/asm/posix_types_64.h
deleted file mode 100644
index 3a9128d..0000000
--- a/arch/sh/include/uapi/asm/posix_types_64.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_POSIX_TYPES_64_H
-#define __ASM_SH_POSIX_TYPES_64_H
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-typedef unsigned short __kernel_uid_t;
-#define __kernel_uid_t __kernel_uid_t
-typedef unsigned short __kernel_gid_t;
-#define __kernel_gid_t __kernel_gid_t
-typedef long unsigned int __kernel_size_t;
-#define __kernel_size_t __kernel_size_t
-typedef int __kernel_ssize_t;
-#define __kernel_ssize_t __kernel_ssize_t
-typedef int __kernel_ptrdiff_t;
-#define __kernel_ptrdiff_t __kernel_ptrdiff_t
-
-typedef unsigned short __kernel_old_uid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_gid_t __kernel_old_gid_t
-typedef unsigned short __kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* __ASM_SH_POSIX_TYPES_64_H */
diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h
index 4ec9c2b..5c88e46 100644
--- a/arch/sh/include/uapi/asm/ptrace.h
+++ b/arch/sh/include/uapi/asm/ptrace.h
@@ -25,11 +25,6 @@
#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
#define PT_TEXT_LEN 252
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-#include <asm/ptrace_64.h>
-#else
#include <asm/ptrace_32.h>
-#endif
-
#endif /* _UAPI__ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/uapi/asm/ptrace_64.h b/arch/sh/include/uapi/asm/ptrace_64.h
deleted file mode 100644
index a6f84eb..0000000
--- a/arch/sh/include/uapi/asm/ptrace_64.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_SH_PTRACE_64_H
-#define _UAPI__ASM_SH_PTRACE_64_H
-
-struct pt_regs {
- unsigned long long pc;
- unsigned long long sr;
- long long syscall_nr;
- unsigned long long regs[63];
- unsigned long long tregs[8];
- unsigned long long pad[2];
-};
-
-
-#endif /* _UAPI__ASM_SH_PTRACE_64_H */
diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h
index d2b7e4f..a9cc8ba 100644
--- a/arch/sh/include/uapi/asm/sigcontext.h
+++ b/arch/sh/include/uapi/asm/sigcontext.h
@@ -5,18 +5,6 @@
struct sigcontext {
unsigned long oldmask;
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
- /* CPU registers */
- unsigned long long sc_regs[63];
- unsigned long long sc_tregs[8];
- unsigned long long sc_pc;
- unsigned long long sc_sr;
-
- /* FPU registers */
- unsigned long long sc_fpregs[32];
- unsigned int sc_fpscr;
- unsigned int sc_fpvalid;
-#else
/* CPU registers */
unsigned long sc_regs[16];
unsigned long sc_pc;
@@ -32,7 +20,6 @@
unsigned int sc_fpscr;
unsigned int sc_fpul;
unsigned int sc_ownedfp;
-#endif
};
#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h
index 659b87c..b0ca755 100644
--- a/arch/sh/include/uapi/asm/stat.h
+++ b/arch/sh/include/uapi/asm/stat.h
@@ -16,66 +16,6 @@
unsigned long st_ctime;
};
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned short st_dev;
- unsigned char __pad0[10];
-
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned short st_rdev;
- unsigned char __pad3[10];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* future possible st_blocks high bits */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */
-
- unsigned long __unused1;
- unsigned long __unused2;
-};
-#else
struct stat {
unsigned long st_dev;
unsigned long st_ino;
@@ -134,6 +74,5 @@
};
#define STAT_HAVE_NSEC 1
-#endif
#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h
index f0b0215..c727d38 100644
--- a/arch/sh/include/uapi/asm/swab.h
+++ b/arch/sh/include/uapi/asm/swab.h
@@ -13,14 +13,9 @@
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
-#ifdef __SH5__
- "byterev %1, %0\n\t"
- "shari %0, 32, %0"
-#else
"swap.b %1, %0\n\t"
"swap.w %0, %0\n\t"
"swap.b %0, %0"
-#endif
: "=r" (x)
: "r" (x));
@@ -31,12 +26,7 @@
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
-#ifdef __SH5__
- "byterev %1, %0\n\t"
- "shari %0, 32, %0"
-#else
"swap.b %1, %0"
-#endif
: "=r" (x)
: "r" (x));
diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h
index 9e0b4e5..0f7c777 100644
--- a/arch/sh/include/uapi/asm/unistd.h
+++ b/arch/sh/include/uapi/asm/unistd.h
@@ -1,8 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __KERNEL__
-# ifdef __SH5__
-# include <asm/unistd_64.h>
-# else
-# include <asm/unistd_32.h>
-# endif
-#endif
+#include <asm/unistd_32.h>
diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h
deleted file mode 100644
index 75da548..0000000
--- a/arch/sh/include/uapi/asm/unistd_64.h
+++ /dev/null
@@ -1,423 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_UNISTD_64_H
-#define __ASM_SH_UNISTD_64_H
-
-/*
- * include/asm-sh/unistd_64.h
- *
- * This file contains the system call numbers.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2004 Sean McGoogan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
- /* 17 was sys_break */
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
- /* 31 was sys_stty */
- /* 32 was sys_gtty */
-#define __NR_access 33
-#define __NR_nice 34
- /* 35 was sys_ftime */
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
- /* 44 was sys_prof */
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
- /* 53 was sys_lock */
-#define __NR_ioctl 54
-#define __NR_fcntl 55
- /* 56 was sys_mpx */
-#define __NR_setpgid 57
- /* 58 was sys_ulimit */
- /* 59 was sys_olduname */
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
- /* 82 was sys_select */
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
- /* 98 was sys_profil */
-#define __NR_statfs 99
-#define __NR_fstatfs 100
- /* 101 was sys_ioperm */
-#define __NR_socketcall 102 /* old implementation of socket systemcall */
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
- /* 110 was sys_iopl */
-#define __NR_vhangup 111
- /* 112 was sys_idle */
- /* 113 was sys_vm86old */
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
- /* 127 was sys_create_module */
-#define __NR_init_module 128
-#define __NR_delete_module 129
- /* 130 was sys_get_kernel_syms */
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
- /* 137 was sys_afs_syscall */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
- /* 166 was sys_vm86 */
- /* 167 was sys_query_module */
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
- /* 188 reserved for getpmsg */
- /* 189 reserved for putpmsg */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-
-/* Non-multiplexed socket family */
-#define __NR_socket 220
-#define __NR_bind 221
-#define __NR_connect 222
-#define __NR_listen 223
-#define __NR_accept 224
-#define __NR_getsockname 225
-#define __NR_getpeername 226
-#define __NR_socketpair 227
-#define __NR_send 228
-#define __NR_sendto 229
-#define __NR_recv 230
-#define __NR_recvfrom 231
-#define __NR_shutdown 232
-#define __NR_setsockopt 233
-#define __NR_getsockopt 234
-#define __NR_sendmsg 235
-#define __NR_recvmsg 236
-
-/* Non-multiplexed IPC family */
-#define __NR_semop 237
-#define __NR_semget 238
-#define __NR_semctl 239
-#define __NR_msgsnd 240
-#define __NR_msgrcv 241
-#define __NR_msgget 242
-#define __NR_msgctl 243
-#define __NR_shmat 244
-#define __NR_shmdt 245
-#define __NR_shmget 246
-#define __NR_shmctl 247
-
-#define __NR_getdents64 248
-#define __NR_fcntl64 249
- /* 250 is reserved for tux */
- /* 251 is unused */
-#define __NR_gettid 252
-#define __NR_readahead 253
-#define __NR_setxattr 254
-#define __NR_lsetxattr 255
-#define __NR_fsetxattr 256
-#define __NR_getxattr 257
-#define __NR_lgetxattr 258
-#define __NR_fgetxattr 259
-#define __NR_listxattr 260
-#define __NR_llistxattr 261
-#define __NR_flistxattr 262
-#define __NR_removexattr 263
-#define __NR_lremovexattr 264
-#define __NR_fremovexattr 265
-#define __NR_tkill 266
-#define __NR_sendfile64 267
-#define __NR_futex 268
-#define __NR_sched_setaffinity 269
-#define __NR_sched_getaffinity 270
- /* 271 is reserved for set_thread_area */
- /* 272 is reserved for get_thread_area */
-#define __NR_io_setup 273
-#define __NR_io_destroy 274
-#define __NR_io_getevents 275
-#define __NR_io_submit 276
-#define __NR_io_cancel 277
-#define __NR_fadvise64 278
- /* 279 is unused */
-#define __NR_exit_group 280
-
-#define __NR_lookup_dcookie 281
-#define __NR_epoll_create 282
-#define __NR_epoll_ctl 283
-#define __NR_epoll_wait 284
-#define __NR_remap_file_pages 285
-#define __NR_set_tid_address 286
-#define __NR_timer_create 287
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 296
-#define __NR_fstatfs64 297
-#define __NR_tgkill 298
-#define __NR_utimes 299
-#define __NR_fadvise64_64 300
- /* 301 is reserved for vserver */
- /* 302 is reserved for mbind */
- /* 303 is reserved for get_mempolicy */
- /* 304 is reserved for set_mempolicy */
-#define __NR_mq_open 305
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
- /* 311 is reserved for kexec */
-#define __NR_waitid 312
-#define __NR_add_key 313
-#define __NR_request_key 314
-#define __NR_keyctl 315
-#define __NR_ioprio_set 316
-#define __NR_ioprio_get 317
-#define __NR_inotify_init 318
-#define __NR_inotify_add_watch 319
-#define __NR_inotify_rm_watch 320
- /* 321 is unused */
-#define __NR_migrate_pages 322
-#define __NR_openat 323
-#define __NR_mkdirat 324
-#define __NR_mknodat 325
-#define __NR_fchownat 326
-#define __NR_futimesat 327
-#define __NR_fstatat64 328
-#define __NR_unlinkat 329
-#define __NR_renameat 330
-#define __NR_linkat 331
-#define __NR_symlinkat 332
-#define __NR_readlinkat 333
-#define __NR_fchmodat 334
-#define __NR_faccessat 335
-#define __NR_pselect6 336
-#define __NR_ppoll 337
-#define __NR_unshare 338
-#define __NR_set_robust_list 339
-#define __NR_get_robust_list 340
-#define __NR_splice 341
-#define __NR_sync_file_range 342
-#define __NR_tee 343
-#define __NR_vmsplice 344
-#define __NR_move_pages 345
-#define __NR_getcpu 346
-#define __NR_epoll_pwait 347
-#define __NR_utimensat 348
-#define __NR_signalfd 349
-#define __NR_timerfd_create 350
-#define __NR_eventfd 351
-#define __NR_fallocate 352
-#define __NR_timerfd_settime 353
-#define __NR_timerfd_gettime 354
-#define __NR_signalfd4 355
-#define __NR_eventfd2 356
-#define __NR_epoll_create1 357
-#define __NR_dup3 358
-#define __NR_pipe2 359
-#define __NR_inotify_init1 360
-#define __NR_preadv 361
-#define __NR_pwritev 362
-#define __NR_rt_tgsigqueueinfo 363
-#define __NR_perf_event_open 364
-#define __NR_recvmmsg 365
-#define __NR_accept4 366
-#define __NR_fanotify_init 367
-#define __NR_fanotify_mark 368
-#define __NR_prlimit64 369
-#define __NR_name_to_handle_at 370
-#define __NR_open_by_handle_at 371
-#define __NR_clock_adjtime 372
-#define __NR_syncfs 373
-#define __NR_sendmmsg 374
-#define __NR_setns 375
-#define __NR_process_vm_readv 376
-#define __NR_process_vm_writev 377
-#define __NR_kcmp 378
-#define __NR_finit_module 379
-#define __NR_sched_getattr 380
-#define __NR_sched_setattr 381
-#define __NR_renameat2 382
-#define __NR_seccomp 383
-#define __NR_getrandom 384
-#define __NR_memfd_create 385
-#define __NR_bpf 386
-#define __NR_execveat 387
-#define __NR_userfaultfd 388
-#define __NR_membarrier 389
-#define __NR_mlock2 390
-#define __NR_copy_file_range 391
-#define __NR_preadv2 392
-#define __NR_pwritev2 393
-
-#ifdef __KERNEL__
-#define __NR_syscalls 394
-#endif
-
-#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 59673f8..b0f5574 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -3,7 +3,7 @@
# Makefile for the Linux/SuperH kernel.
#
-extra-y := head_$(BITS).o vmlinux.lds
+extra-y := head_32.o vmlinux.lds
ifdef CONFIG_FUNCTION_TRACER
# Do not profile debug and lowlevel utilities
@@ -13,26 +13,26 @@
CFLAGS_REMOVE_return_address.o = -pg
obj-y := debugtraps.o dumpstack.o \
- idle.o io.o irq.o irq_$(BITS).o kdebugfs.o \
+ idle.o io.o irq.o irq_32.o kdebugfs.o \
machvec.o nmi_debug.o process.o \
- process_$(BITS).o ptrace.o ptrace_$(BITS).o \
+ process_32.o ptrace.o ptrace_32.o \
reboot.o return_address.o \
- setup.o signal_$(BITS).o sys_sh.o \
- syscalls_$(BITS).o time.o topology.o traps.o \
- traps_$(BITS).o unwinder.o
+ setup.o signal_32.o sys_sh.o \
+ syscalls_32.o time.o topology.o traps.o \
+ traps_32.o unwinder.o
ifndef CONFIG_GENERIC_IOMAP
obj-y += iomap.o
obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
endif
-obj-$(CONFIG_SUPERH32) += sys_sh32.o
+obj-y += sys_sh32.o
obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o
+obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index f7c22ea9..4611823 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -7,7 +7,6 @@
obj-$(CONFIG_CPU_SH2A) = sh2a/
obj-$(CONFIG_CPU_SH3) = sh3/
obj-$(CONFIG_CPU_SH4) = sh4/
-obj-$(CONFIG_CPU_SH5) = sh5/
# Special cases for family ancestry.
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index ce7291e..1d00874 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -103,7 +103,7 @@
/*
* Generic first-level cache init
*/
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2)
+#if !defined(CONFIG_CPU_J2)
static void cache_init(void)
{
unsigned long ccr, flags;
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 8b91cb9..e4578cd 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -2,6 +2,5 @@
#
# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
#
-obj-$(CONFIG_SUPERH32) += imask.o
-obj-$(CONFIG_CPU_SH5) += intc-sh5.o
+obj-y += imask.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
deleted file mode 100644
index 1b3050f..0000000
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/intc-sh5.c
- *
- * Interrupt Controller support for SH5 INTC.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- *
- * Per-interrupt selective. IRLM=0 (Fixed priority) is not
- * supported being useless without a cascaded interrupt
- * controller.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <cpu/irq.h>
-#include <asm/page.h>
-
-/*
- * Maybe the generic Peripheral block could move to a more
- * generic include file. INTC Block will be defined here
- * and only here to make INTC self-contained in a single
- * file.
- */
-#define INTC_BLOCK_OFFSET 0x01000000
-
-/* Base */
-#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \
- INTC_BLOCK_OFFSET
-
-/* Address */
-#define INTC_ICR_SET (intc_virt + 0x0)
-#define INTC_ICR_CLEAR (intc_virt + 0x8)
-#define INTC_INTPRI_0 (intc_virt + 0x10)
-#define INTC_INTSRC_0 (intc_virt + 0x50)
-#define INTC_INTSRC_1 (intc_virt + 0x58)
-#define INTC_INTREQ_0 (intc_virt + 0x60)
-#define INTC_INTREQ_1 (intc_virt + 0x68)
-#define INTC_INTENB_0 (intc_virt + 0x70)
-#define INTC_INTENB_1 (intc_virt + 0x78)
-#define INTC_INTDSB_0 (intc_virt + 0x80)
-#define INTC_INTDSB_1 (intc_virt + 0x88)
-
-#define INTC_ICR_IRLM 0x1
-#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */
-#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */
-
-
-/*
- * Mapper between the vector ordinal and the IRQ number
- * passed to kernel/device drivers.
- */
-int intc_evt_to_irq[(0xE20/0x20)+1] = {
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
- 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */
- 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */
- 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
- -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
- -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
- 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
- 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
- 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
- -1, -1 /* 0xE00 - 0xE20 */
-};
-
-static unsigned long intc_virt;
-static int irlm; /* IRL mode */
-
-static void enable_intc_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long reg;
- unsigned long bitmask;
-
- if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
- printk("Trying to use straight IRL0-3 with an encoding platform.\n");
-
- if (irq < 32) {
- reg = INTC_INTENB_0;
- bitmask = 1 << irq;
- } else {
- reg = INTC_INTENB_1;
- bitmask = 1 << (irq - 32);
- }
-
- __raw_writel(bitmask, reg);
-}
-
-static void disable_intc_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long reg;
- unsigned long bitmask;
-
- if (irq < 32) {
- reg = INTC_INTDSB_0;
- bitmask = 1 << irq;
- } else {
- reg = INTC_INTDSB_1;
- bitmask = 1 << (irq - 32);
- }
-
- __raw_writel(bitmask, reg);
-}
-
-static struct irq_chip intc_irq_type = {
- .name = "INTC",
- .irq_enable = enable_intc_irq,
- .irq_disable = disable_intc_irq,
-};
-
-void __init plat_irq_setup(void)
-{
- unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
- unsigned long reg;
- int i;
-
- intc_virt = (unsigned long)ioremap(INTC_BASE, 1024);
- if (!intc_virt) {
- panic("Unable to remap INTC\n");
- }
-
-
- /* Set default: per-line enable/disable, priority driven ack/eoi */
- for (i = 0; i < NR_INTC_IRQS; i++)
- irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-
-
- /* Disable all interrupts and set all priorities to 0 to avoid trouble */
- __raw_writel(-1, INTC_INTDSB_0);
- __raw_writel(-1, INTC_INTDSB_1);
-
- for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
- __raw_writel( NO_PRIORITY, reg);
-
-
-#ifdef CONFIG_SH_CAYMAN
- {
- unsigned long data;
-
- /* Set IRLM */
- /* If all the priorities are set to 'no priority', then
- * assume we are using encoded mode.
- */
- irlm = platform_int_priority[IRQ_IRL0] +
- platform_int_priority[IRQ_IRL1] +
- platform_int_priority[IRQ_IRL2] +
- platform_int_priority[IRQ_IRL3];
- if (irlm == NO_PRIORITY) {
- /* IRLM = 0 */
- reg = INTC_ICR_CLEAR;
- i = IRQ_INTA;
- printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
- } else {
- /* IRLM = 1 */
- reg = INTC_ICR_SET;
- i = IRQ_IRL0;
- }
- __raw_writel(INTC_ICR_IRLM, reg);
-
- /* Set interrupt priorities according to platform description */
- for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
- data |= platform_int_priority[i] <<
- ((i % INTC_INTPRI_PPREG) * 4);
- if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
- /* Upon the 7th, set Priority Register */
- __raw_writel(data, reg);
- data = 0;
- reg += 8;
- }
- }
- }
-#endif
-
- /*
- * And now let interrupts come in.
- * sti() is not enough, we need to
- * lower priority, too.
- */
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-}
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
index 85961b4..a306bcd 100644
--- a/arch/sh/kernel/cpu/proc.c
+++ b/arch/sh/kernel/cpu/proc.c
@@ -24,7 +24,6 @@
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
- [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
[CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 4b0db82..74620f3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -391,6 +391,7 @@
&tmu0_device,
&tmu1_device,
&tmu2_device,
+ &tmu3_device,
};
static struct platform_device *sh7786_devices[] __initdata = {
diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile
deleted file mode 100644
index 97d23ec..0000000
--- a/arch/sh/kernel/cpu/sh5/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-5 backends.
-#
-obj-y := entry.o probe.o switchto.o
-
-obj-$(CONFIG_SH_FPU) += fpu.o
-obj-$(CONFIG_KALLSYMS) += unwind.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SH5) += setup-sh5.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SH5) := clock-sh5.o
-
-obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
deleted file mode 100644
index dee6be2..0000000
--- a/arch/sh/kernel/cpu/sh5/clock-sh5.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/clock-sh5.c
- *
- * SH-5 support for the clock framework
- *
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-
-/* Clock, Power and Reset Controller */
-#define CPRC_BLOCK_OFF 0x01010000
-#define CPRC_BASE (PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF)
-
-static unsigned long cprc_base;
-
-static void master_clk_init(struct clk *clk)
-{
- int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
- clk->rate *= ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
- return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
- return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(cprc_base) & 0x0007);
- return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh5_clk_ops[] = {
- &sh5_master_clk_ops,
- &sh5_module_clk_ops,
- &sh5_bus_clk_ops,
- &sh5_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- cprc_base = (unsigned long)ioremap(CPRC_BASE, 1024);
- BUG_ON(!cprc_base);
-
- if (idx < ARRAY_SIZE(sh5_clk_ops))
- *ops = sh5_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
deleted file mode 100644
index 81c8b64..0000000
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ /dev/null
@@ -1,2000 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh5/entry.S
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 - 2008 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/sys.h>
-#include <cpu/registers.h>
-#include <asm/processor.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-/*
- * SR fields.
- */
-#define SR_ASID_MASK 0x00ff0000
-#define SR_FD_MASK 0x00008000
-#define SR_SS 0x08000000
-#define SR_BL 0x10000000
-#define SR_MD 0x40000000
-
-/*
- * Event code.
- */
-#define EVENT_INTERRUPT 0
-#define EVENT_FAULT_TLB 1
-#define EVENT_FAULT_NOT_TLB 2
-#define EVENT_DEBUG 3
-
-/* EXPEVT values */
-#define RESET_CAUSE 0x20
-#define DEBUGSS_CAUSE 0x980
-
-/*
- * Frame layout. Quad index.
- */
-#define FRAME_T(x) FRAME_TBASE+(x*8)
-#define FRAME_R(x) FRAME_RBASE+(x*8)
-#define FRAME_S(x) FRAME_SBASE+(x*8)
-#define FSPC 0
-#define FSSR 1
-#define FSYSCALL_ID 2
-
-/* Arrange the save frame to be a multiple of 32 bytes long */
-#define FRAME_SBASE 0
-#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */
-#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */
-#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */
-#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */
-
-#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */
-#define FP_FRAME_BASE 0
-
-#define SAVED_R2 0*8
-#define SAVED_R3 1*8
-#define SAVED_R4 2*8
-#define SAVED_R5 3*8
-#define SAVED_R18 4*8
-#define SAVED_R6 5*8
-#define SAVED_TR0 6*8
-
-/* These are the registers saved in the TLB path that aren't saved in the first
- level of the normal one. */
-#define TLB_SAVED_R25 7*8
-#define TLB_SAVED_TR1 8*8
-#define TLB_SAVED_TR2 9*8
-#define TLB_SAVED_TR3 10*8
-#define TLB_SAVED_TR4 11*8
-/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
- breakage otherwise. */
-#define TLB_SAVED_R0 12*8
-#define TLB_SAVED_R1 13*8
-
-#define CLI() \
- getcon SR, r6; \
- ori r6, 0xf0, r6; \
- putcon r6, SR;
-
-#define STI() \
- getcon SR, r6; \
- andi r6, ~0xf0, r6; \
- putcon r6, SR;
-
-#ifdef CONFIG_PREEMPTION
-# define preempt_stop() CLI()
-#else
-# define preempt_stop()
-# define resume_kernel restore_all
-#endif
-
- .section .data, "aw"
-
-#define FAST_TLBMISS_STACK_CACHELINES 4
-#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
-
-/* Register back-up area for all exceptions */
- .balign 32
- /* Allow for 16 quadwords to be pushed by fast tlbmiss handling
- * register saves etc. */
- .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
-/* This is 32 byte aligned by construction */
-/* Register back-up area for all exceptions */
-reg_save_area:
- .quad 0
- .quad 0
- .quad 0
- .quad 0
-
- .quad 0
- .quad 0
- .quad 0
- .quad 0
-
- .quad 0
- .quad 0
- .quad 0
- .quad 0
-
- .quad 0
- .quad 0
-
-/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
- * reentrancy. Note this area may be accessed via physical address.
- * Align so this fits a whole single cache line, for ease of purging.
- */
- .balign 32,0,32
-resvec_save_area:
- .quad 0
- .quad 0
- .quad 0
- .quad 0
- .quad 0
- .balign 32,0,32
-
-/* Jump table of 3rd level handlers */
-trap_jtable:
- .long do_exception_error /* 0x000 */
- .long do_exception_error /* 0x020 */
-#ifdef CONFIG_MMU
- .long tlb_miss_load /* 0x040 */
- .long tlb_miss_store /* 0x060 */
-#else
- .long do_exception_error
- .long do_exception_error
-#endif
- ! ARTIFICIAL pseudo-EXPEVT setting
- .long do_debug_interrupt /* 0x080 */
-#ifdef CONFIG_MMU
- .long tlb_miss_load /* 0x0A0 */
- .long tlb_miss_store /* 0x0C0 */
-#else
- .long do_exception_error
- .long do_exception_error
-#endif
- .long do_address_error_load /* 0x0E0 */
- .long do_address_error_store /* 0x100 */
-#ifdef CONFIG_SH_FPU
- .long do_fpu_error /* 0x120 */
-#else
- .long do_exception_error /* 0x120 */
-#endif
- .long do_exception_error /* 0x140 */
- .long system_call /* 0x160 */
- .long do_reserved_inst /* 0x180 */
- .long do_illegal_slot_inst /* 0x1A0 */
- .long do_exception_error /* 0x1C0 - NMI */
- .long do_exception_error /* 0x1E0 */
- .rept 15
- .long do_IRQ /* 0x200 - 0x3C0 */
- .endr
- .long do_exception_error /* 0x3E0 */
- .rept 32
- .long do_IRQ /* 0x400 - 0x7E0 */
- .endr
- .long fpu_error_or_IRQA /* 0x800 */
- .long fpu_error_or_IRQB /* 0x820 */
- .long do_IRQ /* 0x840 */
- .long do_IRQ /* 0x860 */
- .rept 6
- .long do_exception_error /* 0x880 - 0x920 */
- .endr
- .long breakpoint_trap_handler /* 0x940 */
- .long do_exception_error /* 0x960 */
- .long do_single_step /* 0x980 */
-
- .rept 3
- .long do_exception_error /* 0x9A0 - 0x9E0 */
- .endr
- .long do_IRQ /* 0xA00 */
- .long do_IRQ /* 0xA20 */
-#ifdef CONFIG_MMU
- .long itlb_miss_or_IRQ /* 0xA40 */
-#else
- .long do_IRQ
-#endif
- .long do_IRQ /* 0xA60 */
- .long do_IRQ /* 0xA80 */
-#ifdef CONFIG_MMU
- .long itlb_miss_or_IRQ /* 0xAA0 */
-#else
- .long do_IRQ
-#endif
- .long do_exception_error /* 0xAC0 */
- .long do_address_error_exec /* 0xAE0 */
- .rept 8
- .long do_exception_error /* 0xB00 - 0xBE0 */
- .endr
- .rept 18
- .long do_IRQ /* 0xC00 - 0xE20 */
- .endr
-
- .section .text64, "ax"
-
-/*
- * --- Exception/Interrupt/Event Handling Section
- */
-
-/*
- * VBR and RESVEC blocks.
- *
- * First level handler for VBR-based exceptions.
- *
- * To avoid waste of space, align to the maximum text block size.
- * This is assumed to be at most 128 bytes or 32 instructions.
- * DO NOT EXCEED 32 instructions on the first level handlers !
- *
- * Also note that RESVEC is contained within the VBR block
- * where the room left (1KB - TEXT_SIZE) allows placing
- * the RESVEC block (at most 512B + TEXT_SIZE).
- *
- * So first (and only) level handler for RESVEC-based exceptions.
- *
- * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
- * and interrupt) we are a lot tight with register space until
- * saving onto the stack frame, which is done in handle_exception().
- *
- */
-
-#define TEXT_SIZE 128
-#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */
-
- .balign TEXT_SIZE
-LVBR_block:
- .space 256, 0 /* Power-on class handler, */
- /* not required here */
-not_a_tlb_miss:
- synco /* TAKum03020 (but probably a good idea anyway.) */
- /* Save original stack pointer into KCR1 */
- putcon SP, KCR1
-
- /* Save other original registers into reg_save_area */
- movi reg_save_area, SP
- st.q SP, SAVED_R2, r2
- st.q SP, SAVED_R3, r3
- st.q SP, SAVED_R4, r4
- st.q SP, SAVED_R5, r5
- st.q SP, SAVED_R6, r6
- st.q SP, SAVED_R18, r18
- gettr tr0, r3
- st.q SP, SAVED_TR0, r3
-
- /* Set args for Non-debug, Not a TLB miss class handler */
- getcon EXPEVT, r2
- movi ret_from_exception, r3
- ori r3, 1, r3
- movi EVENT_FAULT_NOT_TLB, r4
- or SP, ZERO, r5
- getcon KCR1, SP
- pta handle_exception, tr0
- blink tr0, ZERO
-
- .balign 256
- ! VBR+0x200
- nop
- .balign 256
- ! VBR+0x300
- nop
- .balign 256
- /*
- * Instead of the natural .balign 1024 place RESVEC here
- * respecting the final 1KB alignment.
- */
- .balign TEXT_SIZE
- /*
- * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
- * block making sure the final alignment is correct.
- */
-#ifdef CONFIG_MMU
-tlb_miss:
- synco /* TAKum03020 (but probably a good idea anyway.) */
- putcon SP, KCR1
- movi reg_save_area, SP
- /* SP is guaranteed 32-byte aligned. */
- st.q SP, TLB_SAVED_R0 , r0
- st.q SP, TLB_SAVED_R1 , r1
- st.q SP, SAVED_R2 , r2
- st.q SP, SAVED_R3 , r3
- st.q SP, SAVED_R4 , r4
- st.q SP, SAVED_R5 , r5
- st.q SP, SAVED_R6 , r6
- st.q SP, SAVED_R18, r18
-
- /* Save R25 for safety; as/ld may want to use it to achieve the call to
- * the code in mm/tlbmiss.c */
- st.q SP, TLB_SAVED_R25, r25
- gettr tr0, r2
- gettr tr1, r3
- gettr tr2, r4
- gettr tr3, r5
- gettr tr4, r18
- st.q SP, SAVED_TR0 , r2
- st.q SP, TLB_SAVED_TR1 , r3
- st.q SP, TLB_SAVED_TR2 , r4
- st.q SP, TLB_SAVED_TR3 , r5
- st.q SP, TLB_SAVED_TR4 , r18
-
- pt do_fast_page_fault, tr0
- getcon SSR, r2
- getcon EXPEVT, r3
- getcon TEA, r4
- shlri r2, 30, r2
- andi r2, 1, r2 /* r2 = SSR.MD */
- blink tr0, LINK
-
- pt fixup_to_invoke_general_handler, tr1
-
- /* If the fast path handler fixed the fault, just drop through quickly
- to the restore code right away to return to the excepting context.
- */
- bnei/u r2, 0, tr1
-
-fast_tlb_miss_restore:
- ld.q SP, SAVED_TR0, r2
- ld.q SP, TLB_SAVED_TR1, r3
- ld.q SP, TLB_SAVED_TR2, r4
-
- ld.q SP, TLB_SAVED_TR3, r5
- ld.q SP, TLB_SAVED_TR4, r18
-
- ptabs r2, tr0
- ptabs r3, tr1
- ptabs r4, tr2
- ptabs r5, tr3
- ptabs r18, tr4
-
- ld.q SP, TLB_SAVED_R0, r0
- ld.q SP, TLB_SAVED_R1, r1
- ld.q SP, SAVED_R2, r2
- ld.q SP, SAVED_R3, r3
- ld.q SP, SAVED_R4, r4
- ld.q SP, SAVED_R5, r5
- ld.q SP, SAVED_R6, r6
- ld.q SP, SAVED_R18, r18
- ld.q SP, TLB_SAVED_R25, r25
-
- getcon KCR1, SP
- rte
- nop /* for safety, in case the code is run on sh5-101 cut1.x */
-
-fixup_to_invoke_general_handler:
-
- /* OK, new method. Restore stuff that's not expected to get saved into
- the 'first-level' reg save area, then just fall through to setting
- up the registers and calling the second-level handler. */
-
- /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore
- r25,tr1-4 and save r6 to get into the right state. */
-
- ld.q SP, TLB_SAVED_TR1, r3
- ld.q SP, TLB_SAVED_TR2, r4
- ld.q SP, TLB_SAVED_TR3, r5
- ld.q SP, TLB_SAVED_TR4, r18
- ld.q SP, TLB_SAVED_R25, r25
-
- ld.q SP, TLB_SAVED_R0, r0
- ld.q SP, TLB_SAVED_R1, r1
-
- ptabs/u r3, tr1
- ptabs/u r4, tr2
- ptabs/u r5, tr3
- ptabs/u r18, tr4
-
- /* Set args for Non-debug, TLB miss class handler */
- getcon EXPEVT, r2
- movi ret_from_exception, r3
- ori r3, 1, r3
- movi EVENT_FAULT_TLB, r4
- or SP, ZERO, r5
- getcon KCR1, SP
- pta handle_exception, tr0
- blink tr0, ZERO
-#else /* CONFIG_MMU */
- .balign 256
-#endif
-
-/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
- DOES END UP AT VBR+0x600 */
- nop
- nop
- nop
- nop
- nop
- nop
-
- .balign 256
- /* VBR + 0x600 */
-
-interrupt:
- synco /* TAKum03020 (but probably a good idea anyway.) */
- /* Save original stack pointer into KCR1 */
- putcon SP, KCR1
-
- /* Save other original registers into reg_save_area */
- movi reg_save_area, SP
- st.q SP, SAVED_R2, r2
- st.q SP, SAVED_R3, r3
- st.q SP, SAVED_R4, r4
- st.q SP, SAVED_R5, r5
- st.q SP, SAVED_R6, r6
- st.q SP, SAVED_R18, r18
- gettr tr0, r3
- st.q SP, SAVED_TR0, r3
-
- /* Set args for interrupt class handler */
- getcon INTEVT, r2
- movi ret_from_irq, r3
- ori r3, 1, r3
- movi EVENT_INTERRUPT, r4
- or SP, ZERO, r5
- getcon KCR1, SP
- pta handle_exception, tr0
- blink tr0, ZERO
- .balign TEXT_SIZE /* let's waste the bare minimum */
-
-LVBR_block_end: /* Marker. Used for total checking */
-
- .balign 256
-LRESVEC_block:
- /* Panic handler. Called with MMU off. Possible causes/actions:
- * - Reset: Jump to program start.
- * - Single Step: Turn off Single Step & return.
- * - Others: Call panic handler, passing PC as arg.
- * (this may need to be extended...)
- */
-reset_or_panic:
- synco /* TAKum03020 (but probably a good idea anyway.) */
- putcon SP, DCR
- /* First save r0-1 and tr0, as we need to use these */
- movi resvec_save_area-CONFIG_PAGE_OFFSET, SP
- st.q SP, 0, r0
- st.q SP, 8, r1
- gettr tr0, r0
- st.q SP, 32, r0
-
- /* Check cause */
- getcon EXPEVT, r0
- movi RESET_CAUSE, r1
- sub r1, r0, r1 /* r1=0 if reset */
- movi _stext-CONFIG_PAGE_OFFSET, r0
- ori r0, 1, r0
- ptabs r0, tr0
- beqi r1, 0, tr0 /* Jump to start address if reset */
-
- getcon EXPEVT, r0
- movi DEBUGSS_CAUSE, r1
- sub r1, r0, r1 /* r1=0 if single step */
- pta single_step_panic, tr0
- beqi r1, 0, tr0 /* jump if single step */
-
- /* Now jump to where we save the registers. */
- movi panic_stash_regs-CONFIG_PAGE_OFFSET, r1
- ptabs r1, tr0
- blink tr0, r63
-
-single_step_panic:
- /* We are in a handler with Single Step set. We need to resume the
- * handler, by turning on MMU & turning off Single Step. */
- getcon SSR, r0
- movi SR_MMU, r1
- or r0, r1, r0
- movi ~SR_SS, r1
- and r0, r1, r0
- putcon r0, SSR
- /* Restore EXPEVT, as the rte won't do this */
- getcon PEXPEVT, r0
- putcon r0, EXPEVT
- /* Restore regs */
- ld.q SP, 32, r0
- ptabs r0, tr0
- ld.q SP, 0, r0
- ld.q SP, 8, r1
- getcon DCR, SP
- synco
- rte
-
-
- .balign 256
-debug_exception:
- synco /* TAKum03020 (but probably a good idea anyway.) */
- /*
- * Single step/software_break_point first level handler.
- * Called with MMU off, so the first thing we do is enable it
- * by doing an rte with appropriate SSR.
- */
- putcon SP, DCR
- /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
- movi resvec_save_area-CONFIG_PAGE_OFFSET, SP
-
- /* With the MMU off, we are bypassing the cache, so purge any
- * data that will be made stale by the following stores.
- */
- ocbp SP, 0
- synco
-
- st.q SP, 0, r0
- st.q SP, 8, r1
- getcon SPC, r0
- st.q SP, 16, r0
- getcon SSR, r0
- st.q SP, 24, r0
-
- /* Enable MMU, block exceptions, set priv mode, disable single step */
- movi SR_MMU | SR_BL | SR_MD, r1
- or r0, r1, r0
- movi ~SR_SS, r1
- and r0, r1, r0
- putcon r0, SSR
- /* Force control to debug_exception_2 when rte is executed */
- movi debug_exeception_2, r0
- ori r0, 1, r0 /* force SHmedia, just in case */
- putcon r0, SPC
- getcon DCR, SP
- synco
- rte
-debug_exeception_2:
- /* Restore saved regs */
- putcon SP, KCR1
- movi resvec_save_area, SP
- ld.q SP, 24, r0
- putcon r0, SSR
- ld.q SP, 16, r0
- putcon r0, SPC
- ld.q SP, 0, r0
- ld.q SP, 8, r1
-
- /* Save other original registers into reg_save_area */
- movi reg_save_area, SP
- st.q SP, SAVED_R2, r2
- st.q SP, SAVED_R3, r3
- st.q SP, SAVED_R4, r4
- st.q SP, SAVED_R5, r5
- st.q SP, SAVED_R6, r6
- st.q SP, SAVED_R18, r18
- gettr tr0, r3
- st.q SP, SAVED_TR0, r3
-
- /* Set args for debug class handler */
- getcon EXPEVT, r2
- movi ret_from_exception, r3
- ori r3, 1, r3
- movi EVENT_DEBUG, r4
- or SP, ZERO, r5
- getcon KCR1, SP
- pta handle_exception, tr0
- blink tr0, ZERO
-
- .balign 256
-debug_interrupt:
- /* !!! WE COME HERE IN REAL MODE !!! */
- /* Hook-up debug interrupt to allow various debugging options to be
- * hooked into its handler. */
- /* Save original stack pointer into KCR1 */
- synco
- putcon SP, KCR1
- movi resvec_save_area-CONFIG_PAGE_OFFSET, SP
- ocbp SP, 0
- ocbp SP, 32
- synco
-
- /* Save other original registers into reg_save_area thru real addresses */
- st.q SP, SAVED_R2, r2
- st.q SP, SAVED_R3, r3
- st.q SP, SAVED_R4, r4
- st.q SP, SAVED_R5, r5
- st.q SP, SAVED_R6, r6
- st.q SP, SAVED_R18, r18
- gettr tr0, r3
- st.q SP, SAVED_TR0, r3
-
- /* move (spc,ssr)->(pspc,pssr). The rte will shift
- them back again, so that they look like the originals
- as far as the real handler code is concerned. */
- getcon spc, r6
- putcon r6, pspc
- getcon ssr, r6
- putcon r6, pssr
-
- ! construct useful SR for handle_exception
- movi 3, r6
- shlli r6, 30, r6
- getcon sr, r18
- or r18, r6, r6
- putcon r6, ssr
-
- ! SSR is now the current SR with the MD and MMU bits set
- ! i.e. the rte will switch back to priv mode and put
- ! the mmu back on
-
- ! construct spc
- movi handle_exception, r18
- ori r18, 1, r18 ! for safety (do we need this?)
- putcon r18, spc
-
- /* Set args for Non-debug, Not a TLB miss class handler */
-
- ! EXPEVT==0x80 is unused, so 'steal' this value to put the
- ! debug interrupt handler in the vectoring table
- movi 0x80, r2
- movi ret_from_exception, r3
- ori r3, 1, r3
- movi EVENT_FAULT_NOT_TLB, r4
-
- or SP, ZERO, r5
- movi CONFIG_PAGE_OFFSET, r6
- add r6, r5, r5
- getcon KCR1, SP
-
- synco ! for safety
- rte ! -> handle_exception, switch back to priv mode again
-
-LRESVEC_block_end: /* Marker. Unused. */
-
- .balign TEXT_SIZE
-
-/*
- * Second level handler for VBR-based exceptions. Pre-handler.
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (KCR0) Current [current task union]
- * (KCR1) Original SP
- * (r2) INTEVT/EXPEVT
- * (r3) appropriate return address
- * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
- * (r5) Pointer to reg_save_area
- * (SP) Original SP
- *
- * Available registers:
- * (r6)
- * (r18)
- * (tr0)
- *
- */
-handle_exception:
- /* Common 2nd level handler. */
-
- /* First thing we need an appropriate stack pointer */
- getcon SSR, r6
- shlri r6, 30, r6
- andi r6, 1, r6
- pta stack_ok, tr0
- bne r6, ZERO, tr0 /* Original stack pointer is fine */
-
- /* Set stack pointer for user fault */
- getcon KCR0, SP
- movi THREAD_SIZE, r6 /* Point to the end */
- add SP, r6, SP
-
-stack_ok:
-
-/* DEBUG : check for underflow/overflow of the kernel stack */
- pta no_underflow, tr0
- getcon KCR0, r6
- movi 1024, r18
- add r6, r18, r6
- bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone
-
-/* Just panic to cause a crash. */
-bad_sp:
- ld.b r63, 0, r6
- nop
-
-no_underflow:
- pta bad_sp, tr0
- getcon kcr0, r6
- movi THREAD_SIZE, r18
- add r18, r6, r6
- bgt SP, r6, tr0 ! sp above the stack
-
- /* Make some room for the BASIC frame. */
- movi -(FRAME_SIZE), r6
- add SP, r6, SP
-
-/* Could do this with no stalling if we had another spare register, but the
- code below will be OK. */
- ld.q r5, SAVED_R2, r6
- ld.q r5, SAVED_R3, r18
- st.q SP, FRAME_R(2), r6
- ld.q r5, SAVED_R4, r6
- st.q SP, FRAME_R(3), r18
- ld.q r5, SAVED_R5, r18
- st.q SP, FRAME_R(4), r6
- ld.q r5, SAVED_R6, r6
- st.q SP, FRAME_R(5), r18
- ld.q r5, SAVED_R18, r18
- st.q SP, FRAME_R(6), r6
- ld.q r5, SAVED_TR0, r6
- st.q SP, FRAME_R(18), r18
- st.q SP, FRAME_T(0), r6
-
- /* Keep old SP around */
- getcon KCR1, r6
-
- /* Save the rest of the general purpose registers */
- st.q SP, FRAME_R(0), r0
- st.q SP, FRAME_R(1), r1
- st.q SP, FRAME_R(7), r7
- st.q SP, FRAME_R(8), r8
- st.q SP, FRAME_R(9), r9
- st.q SP, FRAME_R(10), r10
- st.q SP, FRAME_R(11), r11
- st.q SP, FRAME_R(12), r12
- st.q SP, FRAME_R(13), r13
- st.q SP, FRAME_R(14), r14
-
- /* SP is somewhere else */
- st.q SP, FRAME_R(15), r6
-
- st.q SP, FRAME_R(16), r16
- st.q SP, FRAME_R(17), r17
- /* r18 is saved earlier. */
- st.q SP, FRAME_R(19), r19
- st.q SP, FRAME_R(20), r20
- st.q SP, FRAME_R(21), r21
- st.q SP, FRAME_R(22), r22
- st.q SP, FRAME_R(23), r23
- st.q SP, FRAME_R(24), r24
- st.q SP, FRAME_R(25), r25
- st.q SP, FRAME_R(26), r26
- st.q SP, FRAME_R(27), r27
- st.q SP, FRAME_R(28), r28
- st.q SP, FRAME_R(29), r29
- st.q SP, FRAME_R(30), r30
- st.q SP, FRAME_R(31), r31
- st.q SP, FRAME_R(32), r32
- st.q SP, FRAME_R(33), r33
- st.q SP, FRAME_R(34), r34
- st.q SP, FRAME_R(35), r35
- st.q SP, FRAME_R(36), r36
- st.q SP, FRAME_R(37), r37
- st.q SP, FRAME_R(38), r38
- st.q SP, FRAME_R(39), r39
- st.q SP, FRAME_R(40), r40
- st.q SP, FRAME_R(41), r41
- st.q SP, FRAME_R(42), r42
- st.q SP, FRAME_R(43), r43
- st.q SP, FRAME_R(44), r44
- st.q SP, FRAME_R(45), r45
- st.q SP, FRAME_R(46), r46
- st.q SP, FRAME_R(47), r47
- st.q SP, FRAME_R(48), r48
- st.q SP, FRAME_R(49), r49
- st.q SP, FRAME_R(50), r50
- st.q SP, FRAME_R(51), r51
- st.q SP, FRAME_R(52), r52
- st.q SP, FRAME_R(53), r53
- st.q SP, FRAME_R(54), r54
- st.q SP, FRAME_R(55), r55
- st.q SP, FRAME_R(56), r56
- st.q SP, FRAME_R(57), r57
- st.q SP, FRAME_R(58), r58
- st.q SP, FRAME_R(59), r59
- st.q SP, FRAME_R(60), r60
- st.q SP, FRAME_R(61), r61
- st.q SP, FRAME_R(62), r62
-
- /*
- * Save the S* registers.
- */
- getcon SSR, r61
- st.q SP, FRAME_S(FSSR), r61
- getcon SPC, r62
- st.q SP, FRAME_S(FSPC), r62
- movi -1, r62 /* Reset syscall_nr */
- st.q SP, FRAME_S(FSYSCALL_ID), r62
-
- /* Save the rest of the target registers */
- gettr tr1, r6
- st.q SP, FRAME_T(1), r6
- gettr tr2, r6
- st.q SP, FRAME_T(2), r6
- gettr tr3, r6
- st.q SP, FRAME_T(3), r6
- gettr tr4, r6
- st.q SP, FRAME_T(4), r6
- gettr tr5, r6
- st.q SP, FRAME_T(5), r6
- gettr tr6, r6
- st.q SP, FRAME_T(6), r6
- gettr tr7, r6
- st.q SP, FRAME_T(7), r6
-
- ! setup FP so that unwinder can wind back through nested kernel mode
- ! exceptions
- add SP, ZERO, r14
-
- /* For syscall and debug race condition, get TRA now */
- getcon TRA, r5
-
- /* We are in a safe position to turn SR.BL off, but set IMASK=0xf
- * Also set FD, to catch FPU usage in the kernel.
- *
- * benedict.gaster@superh.com 29/07/2002
- *
- * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
- * same time change BL from 1->0, as any pending interrupt of a level
- * higher than he previous value of IMASK will leak through and be
- * taken unexpectedly.
- *
- * To avoid this we raise the IMASK and then issue another PUTCON to
- * enable interrupts.
- */
- getcon SR, r6
- movi SR_IMASK | SR_FD, r7
- or r6, r7, r6
- putcon r6, SR
- movi SR_UNBLOCK_EXC, r7
- and r6, r7, r6
- putcon r6, SR
-
-
- /* Now call the appropriate 3rd level handler */
- or r3, ZERO, LINK
- movi trap_jtable, r3
- shlri r2, 3, r2
- ldx.l r2, r3, r3
- shlri r2, 2, r2
- ptabs r3, tr0
- or SP, ZERO, r3
- blink tr0, ZERO
-
-/*
- * Second level handler for VBR-based exceptions. Post-handlers.
- *
- * Post-handlers for interrupts (ret_from_irq), exceptions
- * (ret_from_exception) and common reentrance doors (restore_all
- * to get back to the original context, ret_from_syscall loop to
- * check kernel exiting).
- *
- * ret_with_reschedule and work_notifysig are an inner lables of
- * the ret_from_syscall loop.
- *
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (SP) struct pt_regs *, original register's frame pointer (basic)
- *
- */
- .global ret_from_irq
-ret_from_irq:
- ld.q SP, FRAME_S(FSSR), r6
- shlri r6, 30, r6
- andi r6, 1, r6
- pta resume_kernel, tr0
- bne r6, ZERO, tr0 /* no further checks */
- STI()
- pta ret_with_reschedule, tr0
- blink tr0, ZERO /* Do not check softirqs */
-
- .global ret_from_exception
-ret_from_exception:
- preempt_stop()
-
- ld.q SP, FRAME_S(FSSR), r6
- shlri r6, 30, r6
- andi r6, 1, r6
- pta resume_kernel, tr0
- bne r6, ZERO, tr0 /* no further checks */
-
- /* Check softirqs */
-
-#ifdef CONFIG_PREEMPTION
- pta ret_from_syscall, tr0
- blink tr0, ZERO
-
-resume_kernel:
- CLI()
-
- pta restore_all, tr0
-
- getcon KCR0, r6
- ld.l r6, TI_PRE_COUNT, r7
- beq/u r7, ZERO, tr0
-
-need_resched:
- ld.l r6, TI_FLAGS, r7
- movi (1 << TIF_NEED_RESCHED), r8
- and r8, r7, r8
- bne r8, ZERO, tr0
-
- getcon SR, r7
- andi r7, 0xf0, r7
- bne r7, ZERO, tr0
-
- movi preempt_schedule_irq, r7
- ori r7, 1, r7
- ptabs r7, tr1
- blink tr1, LINK
-
- pta need_resched, tr1
- blink tr1, ZERO
-#endif
-
- .global ret_from_syscall
-ret_from_syscall:
-
-ret_with_reschedule:
- getcon KCR0, r6 ! r6 contains current_thread_info
- ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags
-
- movi _TIF_NEED_RESCHED, r8
- and r8, r7, r8
- pta work_resched, tr0
- bne r8, ZERO, tr0
-
- pta restore_all, tr1
-
- movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8
- and r8, r7, r8
- pta work_notifysig, tr0
- bne r8, ZERO, tr0
-
- blink tr1, ZERO
-
-work_resched:
- pta ret_from_syscall, tr0
- gettr tr0, LINK
- movi schedule, r6
- ptabs r6, tr0
- blink tr0, ZERO /* Call schedule(), return on top */
-
-work_notifysig:
- gettr tr1, LINK
-
- movi do_notify_resume, r6
- ptabs r6, tr0
- or SP, ZERO, r2
- or r7, ZERO, r3
- blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */
-
-restore_all:
- /* Do prefetches */
-
- ld.q SP, FRAME_T(0), r6
- ld.q SP, FRAME_T(1), r7
- ld.q SP, FRAME_T(2), r8
- ld.q SP, FRAME_T(3), r9
- ptabs r6, tr0
- ptabs r7, tr1
- ptabs r8, tr2
- ptabs r9, tr3
- ld.q SP, FRAME_T(4), r6
- ld.q SP, FRAME_T(5), r7
- ld.q SP, FRAME_T(6), r8
- ld.q SP, FRAME_T(7), r9
- ptabs r6, tr4
- ptabs r7, tr5
- ptabs r8, tr6
- ptabs r9, tr7
-
- ld.q SP, FRAME_R(0), r0
- ld.q SP, FRAME_R(1), r1
- ld.q SP, FRAME_R(2), r2
- ld.q SP, FRAME_R(3), r3
- ld.q SP, FRAME_R(4), r4
- ld.q SP, FRAME_R(5), r5
- ld.q SP, FRAME_R(6), r6
- ld.q SP, FRAME_R(7), r7
- ld.q SP, FRAME_R(8), r8
- ld.q SP, FRAME_R(9), r9
- ld.q SP, FRAME_R(10), r10
- ld.q SP, FRAME_R(11), r11
- ld.q SP, FRAME_R(12), r12
- ld.q SP, FRAME_R(13), r13
- ld.q SP, FRAME_R(14), r14
-
- ld.q SP, FRAME_R(16), r16
- ld.q SP, FRAME_R(17), r17
- ld.q SP, FRAME_R(18), r18
- ld.q SP, FRAME_R(19), r19
- ld.q SP, FRAME_R(20), r20
- ld.q SP, FRAME_R(21), r21
- ld.q SP, FRAME_R(22), r22
- ld.q SP, FRAME_R(23), r23
- ld.q SP, FRAME_R(24), r24
- ld.q SP, FRAME_R(25), r25
- ld.q SP, FRAME_R(26), r26
- ld.q SP, FRAME_R(27), r27
- ld.q SP, FRAME_R(28), r28
- ld.q SP, FRAME_R(29), r29
- ld.q SP, FRAME_R(30), r30
- ld.q SP, FRAME_R(31), r31
- ld.q SP, FRAME_R(32), r32
- ld.q SP, FRAME_R(33), r33
- ld.q SP, FRAME_R(34), r34
- ld.q SP, FRAME_R(35), r35
- ld.q SP, FRAME_R(36), r36
- ld.q SP, FRAME_R(37), r37
- ld.q SP, FRAME_R(38), r38
- ld.q SP, FRAME_R(39), r39
- ld.q SP, FRAME_R(40), r40
- ld.q SP, FRAME_R(41), r41
- ld.q SP, FRAME_R(42), r42
- ld.q SP, FRAME_R(43), r43
- ld.q SP, FRAME_R(44), r44
- ld.q SP, FRAME_R(45), r45
- ld.q SP, FRAME_R(46), r46
- ld.q SP, FRAME_R(47), r47
- ld.q SP, FRAME_R(48), r48
- ld.q SP, FRAME_R(49), r49
- ld.q SP, FRAME_R(50), r50
- ld.q SP, FRAME_R(51), r51
- ld.q SP, FRAME_R(52), r52
- ld.q SP, FRAME_R(53), r53
- ld.q SP, FRAME_R(54), r54
- ld.q SP, FRAME_R(55), r55
- ld.q SP, FRAME_R(56), r56
- ld.q SP, FRAME_R(57), r57
- ld.q SP, FRAME_R(58), r58
-
- getcon SR, r59
- movi SR_BLOCK_EXC, r60
- or r59, r60, r59
- putcon r59, SR /* SR.BL = 1, keep nesting out */
- ld.q SP, FRAME_S(FSSR), r61
- ld.q SP, FRAME_S(FSPC), r62
- movi SR_ASID_MASK, r60
- and r59, r60, r59
- andc r61, r60, r61 /* Clear out older ASID */
- or r59, r61, r61 /* Retain current ASID */
- putcon r61, SSR
- putcon r62, SPC
-
- /* Ignore FSYSCALL_ID */
-
- ld.q SP, FRAME_R(59), r59
- ld.q SP, FRAME_R(60), r60
- ld.q SP, FRAME_R(61), r61
- ld.q SP, FRAME_R(62), r62
-
- /* Last touch */
- ld.q SP, FRAME_R(15), SP
- rte
- nop
-
-/*
- * Third level handlers for VBR-based exceptions. Adapting args to
- * and/or deflecting to fourth level handlers.
- *
- * Fourth level handlers interface.
- * Most are C-coded handlers directly pointed by the trap_jtable.
- * (Third = Fourth level)
- * Inputs:
- * (r2) fault/interrupt code, entry number (e.g. NMI = 14,
- * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
- * (r3) struct pt_regs *, original register's frame pointer
- * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
- * (r5) TRA control register (for syscall/debug benefit only)
- * (LINK) return address
- * (SP) = r3
- *
- * Kernel TLB fault handlers will get a slightly different interface.
- * (r2) struct pt_regs *, original register's frame pointer
- * (r3) page fault error code (see asm/thread_info.h)
- * (r4) Effective Address of fault
- * (LINK) return address
- * (SP) = r2
- *
- * fpu_error_or_IRQ? is a helper to deflect to the right cause.
- *
- */
-#ifdef CONFIG_MMU
-tlb_miss_load:
- or SP, ZERO, r2
- or ZERO, ZERO, r3 /* Read */
- getcon TEA, r4
- pta call_do_page_fault, tr0
- beq ZERO, ZERO, tr0
-
-tlb_miss_store:
- or SP, ZERO, r2
- movi FAULT_CODE_WRITE, r3 /* Write */
- getcon TEA, r4
- pta call_do_page_fault, tr0
- beq ZERO, ZERO, tr0
-
-itlb_miss_or_IRQ:
- pta its_IRQ, tr0
- beqi/u r4, EVENT_INTERRUPT, tr0
-
- /* ITLB miss */
- or SP, ZERO, r2
- movi FAULT_CODE_ITLB, r3
- getcon TEA, r4
- /* Fall through */
-
-call_do_page_fault:
- movi do_page_fault, r6
- ptabs r6, tr0
- blink tr0, ZERO
-#endif /* CONFIG_MMU */
-
-fpu_error_or_IRQA:
- pta its_IRQ, tr0
- beqi/l r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
- movi fpu_state_restore_trap_handler, r6
-#else
- movi do_exception_error, r6
-#endif
- ptabs r6, tr0
- blink tr0, ZERO
-
-fpu_error_or_IRQB:
- pta its_IRQ, tr0
- beqi/l r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
- movi fpu_state_restore_trap_handler, r6
-#else
- movi do_exception_error, r6
-#endif
- ptabs r6, tr0
- blink tr0, ZERO
-
-its_IRQ:
- movi do_IRQ, r6
- ptabs r6, tr0
- blink tr0, ZERO
-
-/*
- * system_call/unknown_trap third level handler:
- *
- * Inputs:
- * (r2) fault/interrupt code, entry number (TRAP = 11)
- * (r3) struct pt_regs *, original register's frame pointer
- * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
- * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
- * (SP) = r3
- * (LINK) return address: ret_from_exception
- * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
- *
- * Outputs:
- * (*r3) Syscall reply (Saved r2)
- * (LINK) In case of syscall only it can be scrapped.
- * Common second level post handler will be ret_from_syscall.
- * Common (non-trace) exit point to that is syscall_ret (saving
- * result to r2). Common bad exit point is syscall_bad (returning
- * ENOSYS then saved to r2).
- *
- */
-
-unknown_trap:
- /* Unknown Trap or User Trace */
- movi do_unknown_trapa, r6
- ptabs r6, tr0
- ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */
- andi r2, 0x1ff, r2 /* r2 = syscall # */
- blink tr0, LINK
-
- pta syscall_ret, tr0
- blink tr0, ZERO
-
- /* New syscall implementation*/
-system_call:
- pta unknown_trap, tr0
- or r5, ZERO, r4 /* TRA (=r5) -> r4 */
- shlri r4, 20, r4
- bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */
-
- /* It's a system call */
- st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */
- andi r5, 0x1ff, r5 /* syscall # -> r5 */
-
- STI()
-
- pta syscall_allowed, tr0
- movi NR_syscalls - 1, r4 /* Last valid */
- bgeu/l r4, r5, tr0
-
-syscall_bad:
- /* Return ENOSYS ! */
- movi -(ENOSYS), r2 /* Fall-through */
-
- .global syscall_ret
-syscall_ret:
- st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */
- ld.q SP, FRAME_S(FSPC), r2
- addi r2, 4, r2 /* Move PC, being pre-execution event */
- st.q SP, FRAME_S(FSPC), r2
- pta ret_from_syscall, tr0
- blink tr0, ZERO
-
-
-/* A different return path for ret_from_fork, because we now need
- * to call schedule_tail with the later kernels. Because prev is
- * loaded into r2 by switch_to() means we can just call it straight away
- */
-
-.global ret_from_fork
-ret_from_fork:
-
- movi schedule_tail,r5
- ori r5, 1, r5
- ptabs r5, tr0
- blink tr0, LINK
-
- ld.q SP, FRAME_S(FSPC), r2
- addi r2, 4, r2 /* Move PC, being pre-execution event */
- st.q SP, FRAME_S(FSPC), r2
- pta ret_from_syscall, tr0
- blink tr0, ZERO
-
-.global ret_from_kernel_thread
-ret_from_kernel_thread:
-
- movi schedule_tail,r5
- ori r5, 1, r5
- ptabs r5, tr0
- blink tr0, LINK
-
- ld.q SP, FRAME_R(2), r2
- ld.q SP, FRAME_R(3), r3
- ptabs r3, tr0
- blink tr0, LINK
-
- ld.q SP, FRAME_S(FSPC), r2
- addi r2, 4, r2 /* Move PC, being pre-execution event */
- st.q SP, FRAME_S(FSPC), r2
- pta ret_from_syscall, tr0
- blink tr0, ZERO
-
-syscall_allowed:
- /* Use LINK to deflect the exit point, default is syscall_ret */
- pta syscall_ret, tr0
- gettr tr0, LINK
- pta syscall_notrace, tr0
-
- getcon KCR0, r2
- ld.l r2, TI_FLAGS, r4
- movi _TIF_WORK_SYSCALL_MASK, r6
- and r6, r4, r6
- beq/l r6, ZERO, tr0
-
- /* Trace it by calling syscall_trace before and after */
- movi do_syscall_trace_enter, r4
- or SP, ZERO, r2
- ptabs r4, tr0
- blink tr0, LINK
-
- /* Save the retval */
- st.q SP, FRAME_R(2), r2
-
- /* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
- ld.q SP, FRAME_S(FSYSCALL_ID), r5
- andi r5, 0x1ff, r5
-
- pta syscall_ret_trace, tr0
- gettr tr0, LINK
-
-syscall_notrace:
- /* Now point to the appropriate 4th level syscall handler */
- movi sys_call_table, r4
- shlli r5, 2, r5
- ldx.l r4, r5, r5
- ptabs r5, tr0
-
- /* Prepare original args */
- ld.q SP, FRAME_R(2), r2
- ld.q SP, FRAME_R(3), r3
- ld.q SP, FRAME_R(4), r4
- ld.q SP, FRAME_R(5), r5
- ld.q SP, FRAME_R(6), r6
- ld.q SP, FRAME_R(7), r7
-
- /* And now the trick for those syscalls requiring regs * ! */
- or SP, ZERO, r8
-
- /* Call it */
- blink tr0, ZERO /* LINK is already properly set */
-
-syscall_ret_trace:
- /* We get back here only if under trace */
- st.q SP, FRAME_R(9), r2 /* Save return value */
-
- movi do_syscall_trace_leave, LINK
- or SP, ZERO, r2
- ptabs LINK, tr0
- blink tr0, LINK
-
- /* This needs to be done after any syscall tracing */
- ld.q SP, FRAME_S(FSPC), r2
- addi r2, 4, r2 /* Move PC, being pre-execution event */
- st.q SP, FRAME_S(FSPC), r2
-
- pta ret_from_syscall, tr0
- blink tr0, ZERO /* Resume normal return sequence */
-
-/*
- * --- Switch to running under a particular ASID and return the previous ASID value
- * --- The caller is assumed to have done a cli before calling this.
- *
- * Input r2 : new ASID
- * Output r2 : old ASID
- */
-
- .global switch_and_save_asid
-switch_and_save_asid:
- getcon sr, r0
- movi 255, r4
- shlli r4, 16, r4 /* r4 = mask to select ASID */
- and r0, r4, r3 /* r3 = shifted old ASID */
- andi r2, 255, r2 /* mask down new ASID */
- shlli r2, 16, r2 /* align new ASID against SR.ASID */
- andc r0, r4, r0 /* efface old ASID from SR */
- or r0, r2, r0 /* insert the new ASID */
- putcon r0, ssr
- movi 1f, r0
- putcon r0, spc
- rte
- nop
-1:
- ptabs LINK, tr0
- shlri r3, 16, r2 /* r2 = old ASID */
- blink tr0, r63
-
- .global route_to_panic_handler
-route_to_panic_handler:
- /* Switch to real mode, goto panic_handler, don't return. Useful for
- last-chance debugging, e.g. if no output wants to go to the console.
- */
-
- movi panic_handler - CONFIG_PAGE_OFFSET, r1
- ptabs r1, tr0
- pta 1f, tr1
- gettr tr1, r0
- putcon r0, spc
- getcon sr, r0
- movi 1, r1
- shlli r1, 31, r1
- andc r0, r1, r0
- putcon r0, ssr
- rte
- nop
-1: /* Now in real mode */
- blink tr0, r63
- nop
-
- .global peek_real_address_q
-peek_real_address_q:
- /* Two args:
- r2 : real mode address to peek
- r2(out) : result quadword
-
- This is provided as a cheapskate way of manipulating device
- registers for debugging (to avoid the need to ioremap the debug
- module, and to avoid the need to ioremap the watchpoint
- controller in a way that identity maps sufficient bits to avoid the
- SH5-101 cut2 silicon defect).
-
- This code is not performance critical
- */
-
- add.l r2, r63, r2 /* sign extend address */
- getcon sr, r0 /* r0 = saved original SR */
- movi 1, r1
- shlli r1, 28, r1
- or r0, r1, r1 /* r0 with block bit set */
- putcon r1, sr /* now in critical section */
- movi 1, r36
- shlli r36, 31, r36
- andc r1, r36, r1 /* turn sr.mmu off in real mode section */
-
- putcon r1, ssr
- movi .peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */
- movi 1f, r37 /* virtual mode return addr */
- putcon r36, spc
-
- synco
- rte
- nop
-
-.peek0: /* come here in real mode, don't touch caches!!
- still in critical section (sr.bl==1) */
- putcon r0, ssr
- putcon r37, spc
- /* Here's the actual peek. If the address is bad, all bets are now off
- * what will happen (handlers invoked in real-mode = bad news) */
- ld.q r2, 0, r2
- synco
- rte /* Back to virtual mode */
- nop
-
-1:
- ptabs LINK, tr0
- blink tr0, r63
-
- .global poke_real_address_q
-poke_real_address_q:
- /* Two args:
- r2 : real mode address to poke
- r3 : quadword value to write.
-
- This is provided as a cheapskate way of manipulating device
- registers for debugging (to avoid the need to ioremap the debug
- module, and to avoid the need to ioremap the watchpoint
- controller in a way that identity maps sufficient bits to avoid the
- SH5-101 cut2 silicon defect).
-
- This code is not performance critical
- */
-
- add.l r2, r63, r2 /* sign extend address */
- getcon sr, r0 /* r0 = saved original SR */
- movi 1, r1
- shlli r1, 28, r1
- or r0, r1, r1 /* r0 with block bit set */
- putcon r1, sr /* now in critical section */
- movi 1, r36
- shlli r36, 31, r36
- andc r1, r36, r1 /* turn sr.mmu off in real mode section */
-
- putcon r1, ssr
- movi .poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */
- movi 1f, r37 /* virtual mode return addr */
- putcon r36, spc
-
- synco
- rte
- nop
-
-.poke0: /* come here in real mode, don't touch caches!!
- still in critical section (sr.bl==1) */
- putcon r0, ssr
- putcon r37, spc
- /* Here's the actual poke. If the address is bad, all bets are now off
- * what will happen (handlers invoked in real-mode = bad news) */
- st.q r2, 0, r3
- synco
- rte /* Back to virtual mode */
- nop
-
-1:
- ptabs LINK, tr0
- blink tr0, r63
-
-#ifdef CONFIG_MMU
-/*
- * --- User Access Handling Section
- */
-
-/*
- * User Access support. It all moved to non inlined Assembler
- * functions in here.
- *
- * __kernel_size_t __copy_user(void *__to, const void *__from,
- * __kernel_size_t __n)
- *
- * Inputs:
- * (r2) target address
- * (r3) source address
- * (r4) size in bytes
- *
- * Ouputs:
- * (*r2) target data
- * (r2) non-copied bytes
- *
- * If a fault occurs on the user pointer, bail out early and return the
- * number of bytes not copied in r2.
- * Strategy : for large blocks, call a real memcpy function which can
- * move >1 byte at a time using unaligned ld/st instructions, and can
- * manipulate the cache using prefetch + alloco to improve the speed
- * further. If a fault occurs in that function, just revert to the
- * byte-by-byte approach used for small blocks; this is rare so the
- * performance hit for that case does not matter.
- *
- * For small blocks it's not worth the overhead of setting up and calling
- * the memcpy routine; do the copy a byte at a time.
- *
- */
- .global __copy_user
-__copy_user:
- pta __copy_user_byte_by_byte, tr1
- movi 16, r0 ! this value is a best guess, should tune it by benchmarking
- bge/u r0, r4, tr1
- pta copy_user_memcpy, tr0
- addi SP, -32, SP
- /* Save arguments in case we have to fix-up unhandled page fault */
- st.q SP, 0, r2
- st.q SP, 8, r3
- st.q SP, 16, r4
- st.q SP, 24, r35 ! r35 is callee-save
- /* Save LINK in a register to reduce RTS time later (otherwise
- ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
- ori LINK, 0, r35
- blink tr0, LINK
-
- /* Copy completed normally if we get back here */
- ptabs r35, tr0
- ld.q SP, 24, r35
- /* don't restore r2-r4, pointless */
- /* set result=r2 to zero as the copy must have succeeded. */
- or r63, r63, r2
- addi SP, 32, SP
- blink tr0, r63 ! RTS
-
- .global __copy_user_fixup
-__copy_user_fixup:
- /* Restore stack frame */
- ori r35, 0, LINK
- ld.q SP, 24, r35
- ld.q SP, 16, r4
- ld.q SP, 8, r3
- ld.q SP, 0, r2
- addi SP, 32, SP
- /* Fall through to original code, in the 'same' state we entered with */
-
-/* The slow byte-by-byte method is used if the fast copy traps due to a bad
- user address. In that rare case, the speed drop can be tolerated. */
-__copy_user_byte_by_byte:
- pta ___copy_user_exit, tr1
- pta ___copy_user1, tr0
- beq/u r4, r63, tr1 /* early exit for zero length copy */
- sub r2, r3, r0
- addi r0, -1, r0
-
-___copy_user1:
- ld.b r3, 0, r5 /* Fault address 1 */
-
- /* Could rewrite this to use just 1 add, but the second comes 'free'
- due to load latency */
- addi r3, 1, r3
- addi r4, -1, r4 /* No real fixup required */
-___copy_user2:
- stx.b r3, r0, r5 /* Fault address 2 */
- bne r4, ZERO, tr0
-
-___copy_user_exit:
- or r4, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
-/*
- * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
- *
- * Inputs:
- * (r2) target address
- * (r3) size in bytes
- *
- * Ouputs:
- * (*r2) zero-ed target data
- * (r2) non-zero-ed bytes
- */
- .global __clear_user
-__clear_user:
- pta ___clear_user_exit, tr1
- pta ___clear_user1, tr0
- beq/u r3, r63, tr1
-
-___clear_user1:
- st.b r2, 0, ZERO /* Fault address */
- addi r2, 1, r2
- addi r3, -1, r3 /* No real fixup required */
- bne r3, ZERO, tr0
-
-___clear_user_exit:
- or r3, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
-#endif /* CONFIG_MMU */
-
-/*
- * extern long __get_user_asm_?(void *val, long addr)
- *
- * Inputs:
- * (r2) dest address
- * (r3) source address (in User Space)
- *
- * Ouputs:
- * (r2) -EFAULT (faulting)
- * 0 (not faulting)
- */
- .global __get_user_asm_b
-__get_user_asm_b:
- or r2, ZERO, r4
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___get_user_asm_b1:
- ld.b r3, 0, r5 /* r5 = data */
- st.b r4, 0, r5
- or ZERO, ZERO, r2
-
-___get_user_asm_b_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __get_user_asm_w
-__get_user_asm_w:
- or r2, ZERO, r4
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___get_user_asm_w1:
- ld.w r3, 0, r5 /* r5 = data */
- st.w r4, 0, r5
- or ZERO, ZERO, r2
-
-___get_user_asm_w_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __get_user_asm_l
-__get_user_asm_l:
- or r2, ZERO, r4
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___get_user_asm_l1:
- ld.l r3, 0, r5 /* r5 = data */
- st.l r4, 0, r5
- or ZERO, ZERO, r2
-
-___get_user_asm_l_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __get_user_asm_q
-__get_user_asm_q:
- or r2, ZERO, r4
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___get_user_asm_q1:
- ld.q r3, 0, r5 /* r5 = data */
- st.q r4, 0, r5
- or ZERO, ZERO, r2
-
-___get_user_asm_q_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-/*
- * extern long __put_user_asm_?(void *pval, long addr)
- *
- * Inputs:
- * (r2) kernel pointer to value
- * (r3) dest address (in User Space)
- *
- * Ouputs:
- * (r2) -EFAULT (faulting)
- * 0 (not faulting)
- */
- .global __put_user_asm_b
-__put_user_asm_b:
- ld.b r2, 0, r4 /* r4 = data */
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___put_user_asm_b1:
- st.b r3, 0, r4
- or ZERO, ZERO, r2
-
-___put_user_asm_b_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __put_user_asm_w
-__put_user_asm_w:
- ld.w r2, 0, r4 /* r4 = data */
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___put_user_asm_w1:
- st.w r3, 0, r4
- or ZERO, ZERO, r2
-
-___put_user_asm_w_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __put_user_asm_l
-__put_user_asm_l:
- ld.l r2, 0, r4 /* r4 = data */
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___put_user_asm_l1:
- st.l r3, 0, r4
- or ZERO, ZERO, r2
-
-___put_user_asm_l_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-
- .global __put_user_asm_q
-__put_user_asm_q:
- ld.q r2, 0, r4 /* r4 = data */
- movi -(EFAULT), r2 /* r2 = reply, no real fixup */
-
-___put_user_asm_q1:
- st.q r3, 0, r4
- or ZERO, ZERO, r2
-
-___put_user_asm_q_exit:
- ptabs LINK, tr0
- blink tr0, ZERO
-
-panic_stash_regs:
- /* The idea is : when we get an unhandled panic, we dump the registers
- to a known memory location, the just sit in a tight loop.
- This allows the human to look at the memory region through the GDB
- session (assuming the debug module's SHwy initiator isn't locked up
- or anything), to hopefully analyze the cause of the panic. */
-
- /* On entry, former r15 (SP) is in DCR
- former r0 is at resvec_saved_area + 0
- former r1 is at resvec_saved_area + 8
- former tr0 is at resvec_saved_area + 32
- DCR is the only register whose value is lost altogether.
- */
-
- movi 0xffffffff80000000, r0 ! phy of dump area
- ld.q SP, 0x000, r1 ! former r0
- st.q r0, 0x000, r1
- ld.q SP, 0x008, r1 ! former r1
- st.q r0, 0x008, r1
- st.q r0, 0x010, r2
- st.q r0, 0x018, r3
- st.q r0, 0x020, r4
- st.q r0, 0x028, r5
- st.q r0, 0x030, r6
- st.q r0, 0x038, r7
- st.q r0, 0x040, r8
- st.q r0, 0x048, r9
- st.q r0, 0x050, r10
- st.q r0, 0x058, r11
- st.q r0, 0x060, r12
- st.q r0, 0x068, r13
- st.q r0, 0x070, r14
- getcon dcr, r14
- st.q r0, 0x078, r14
- st.q r0, 0x080, r16
- st.q r0, 0x088, r17
- st.q r0, 0x090, r18
- st.q r0, 0x098, r19
- st.q r0, 0x0a0, r20
- st.q r0, 0x0a8, r21
- st.q r0, 0x0b0, r22
- st.q r0, 0x0b8, r23
- st.q r0, 0x0c0, r24
- st.q r0, 0x0c8, r25
- st.q r0, 0x0d0, r26
- st.q r0, 0x0d8, r27
- st.q r0, 0x0e0, r28
- st.q r0, 0x0e8, r29
- st.q r0, 0x0f0, r30
- st.q r0, 0x0f8, r31
- st.q r0, 0x100, r32
- st.q r0, 0x108, r33
- st.q r0, 0x110, r34
- st.q r0, 0x118, r35
- st.q r0, 0x120, r36
- st.q r0, 0x128, r37
- st.q r0, 0x130, r38
- st.q r0, 0x138, r39
- st.q r0, 0x140, r40
- st.q r0, 0x148, r41
- st.q r0, 0x150, r42
- st.q r0, 0x158, r43
- st.q r0, 0x160, r44
- st.q r0, 0x168, r45
- st.q r0, 0x170, r46
- st.q r0, 0x178, r47
- st.q r0, 0x180, r48
- st.q r0, 0x188, r49
- st.q r0, 0x190, r50
- st.q r0, 0x198, r51
- st.q r0, 0x1a0, r52
- st.q r0, 0x1a8, r53
- st.q r0, 0x1b0, r54
- st.q r0, 0x1b8, r55
- st.q r0, 0x1c0, r56
- st.q r0, 0x1c8, r57
- st.q r0, 0x1d0, r58
- st.q r0, 0x1d8, r59
- st.q r0, 0x1e0, r60
- st.q r0, 0x1e8, r61
- st.q r0, 0x1f0, r62
- st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake...
-
- ld.q SP, 0x020, r1 ! former tr0
- st.q r0, 0x200, r1
- gettr tr1, r1
- st.q r0, 0x208, r1
- gettr tr2, r1
- st.q r0, 0x210, r1
- gettr tr3, r1
- st.q r0, 0x218, r1
- gettr tr4, r1
- st.q r0, 0x220, r1
- gettr tr5, r1
- st.q r0, 0x228, r1
- gettr tr6, r1
- st.q r0, 0x230, r1
- gettr tr7, r1
- st.q r0, 0x238, r1
-
- getcon sr, r1
- getcon ssr, r2
- getcon pssr, r3
- getcon spc, r4
- getcon pspc, r5
- getcon intevt, r6
- getcon expevt, r7
- getcon pexpevt, r8
- getcon tra, r9
- getcon tea, r10
- getcon kcr0, r11
- getcon kcr1, r12
- getcon vbr, r13
- getcon resvec, r14
-
- st.q r0, 0x240, r1
- st.q r0, 0x248, r2
- st.q r0, 0x250, r3
- st.q r0, 0x258, r4
- st.q r0, 0x260, r5
- st.q r0, 0x268, r6
- st.q r0, 0x270, r7
- st.q r0, 0x278, r8
- st.q r0, 0x280, r9
- st.q r0, 0x288, r10
- st.q r0, 0x290, r11
- st.q r0, 0x298, r12
- st.q r0, 0x2a0, r13
- st.q r0, 0x2a8, r14
-
- getcon SPC,r2
- getcon SSR,r3
- getcon EXPEVT,r4
- /* Prepare to jump to C - physical address */
- movi panic_handler-CONFIG_PAGE_OFFSET, r1
- ori r1, 1, r1
- ptabs r1, tr0
- getcon DCR, SP
- blink tr0, ZERO
- nop
- nop
- nop
- nop
-
-
-
-
-/*
- * --- Signal Handling Section
- */
-
-/*
- * extern long long _sa_default_rt_restorer
- * extern long long _sa_default_restorer
- *
- * or, better,
- *
- * extern void _sa_default_rt_restorer(void)
- * extern void _sa_default_restorer(void)
- *
- * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
- * from user space. Copied into user space by signal management.
- * Both must be quad aligned and 2 quad long (4 instructions).
- *
- */
- .balign 8
- .global sa_default_rt_restorer
-sa_default_rt_restorer:
- movi 0x10, r9
- shori __NR_rt_sigreturn, r9
- trapa r9
- nop
-
- .balign 8
- .global sa_default_restorer
-sa_default_restorer:
- movi 0x10, r9
- shori __NR_sigreturn, r9
- trapa r9
- nop
-
-/*
- * --- __ex_table Section
- */
-
-/*
- * User Access Exception Table.
- */
- .section __ex_table, "a"
-
- .global asm_uaccess_start /* Just a marker */
-asm_uaccess_start:
-
-#ifdef CONFIG_MMU
- .long ___copy_user1, ___copy_user_exit
- .long ___copy_user2, ___copy_user_exit
- .long ___clear_user1, ___clear_user_exit
-#endif
- .long ___get_user_asm_b1, ___get_user_asm_b_exit
- .long ___get_user_asm_w1, ___get_user_asm_w_exit
- .long ___get_user_asm_l1, ___get_user_asm_l_exit
- .long ___get_user_asm_q1, ___get_user_asm_q_exit
- .long ___put_user_asm_b1, ___put_user_asm_b_exit
- .long ___put_user_asm_w1, ___put_user_asm_w_exit
- .long ___put_user_asm_l1, ___put_user_asm_l_exit
- .long ___put_user_asm_q1, ___put_user_asm_q_exit
-
- .global asm_uaccess_end /* Just a marker */
-asm_uaccess_end:
-
-
-
-
-/*
- * --- .init.text Section
- */
-
- __INIT
-
-/*
- * void trap_init (void)
- *
- */
- .global trap_init
-trap_init:
- addi SP, -24, SP /* Room to save r28/r29/r30 */
- st.q SP, 0, r28
- st.q SP, 8, r29
- st.q SP, 16, r30
-
- /* Set VBR and RESVEC */
- movi LVBR_block, r19
- andi r19, -4, r19 /* reset MMUOFF + reserved */
- /* For RESVEC exceptions we force the MMU off, which means we need the
- physical address. */
- movi LRESVEC_block-CONFIG_PAGE_OFFSET, r20
- andi r20, -4, r20 /* reset reserved */
- ori r20, 1, r20 /* set MMUOFF */
- putcon r19, VBR
- putcon r20, RESVEC
-
- /* Sanity check */
- movi LVBR_block_end, r21
- andi r21, -4, r21
- movi BLOCK_SIZE, r29 /* r29 = expected size */
- or r19, ZERO, r30
- add r19, r29, r19
-
- /*
- * Ugly, but better loop forever now than crash afterwards.
- * We should print a message, but if we touch LVBR or
- * LRESVEC blocks we should not be surprised if we get stuck
- * in trap_init().
- */
- pta trap_init_loop, tr1
- gettr tr1, r28 /* r28 = trap_init_loop */
- sub r21, r30, r30 /* r30 = actual size */
-
- /*
- * VBR/RESVEC handlers overlap by being bigger than
- * allowed. Very bad. Just loop forever.
- * (r28) panic/loop address
- * (r29) expected size
- * (r30) actual size
- */
-trap_init_loop:
- bne r19, r21, tr1
-
- /* Now that exception vectors are set up reset SR.BL */
- getcon SR, r22
- movi SR_UNBLOCK_EXC, r23
- and r22, r23, r22
- putcon r22, SR
-
- addi SP, 24, SP
- ptabs LINK, tr0
- blink tr0, ZERO
-
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
deleted file mode 100644
index 3966b5e..0000000
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/fpu.c
- *
- * Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli
- * Copyright (C) 2002 STMicroelectronics Limited
- * Author : Stuart Menefy
- *
- * Started from SH4 version:
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- */
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <asm/processor.h>
-
-void save_fpu(struct task_struct *tsk)
-{
- asm volatile("fst.p %0, (0*8), fp0\n\t"
- "fst.p %0, (1*8), fp2\n\t"
- "fst.p %0, (2*8), fp4\n\t"
- "fst.p %0, (3*8), fp6\n\t"
- "fst.p %0, (4*8), fp8\n\t"
- "fst.p %0, (5*8), fp10\n\t"
- "fst.p %0, (6*8), fp12\n\t"
- "fst.p %0, (7*8), fp14\n\t"
- "fst.p %0, (8*8), fp16\n\t"
- "fst.p %0, (9*8), fp18\n\t"
- "fst.p %0, (10*8), fp20\n\t"
- "fst.p %0, (11*8), fp22\n\t"
- "fst.p %0, (12*8), fp24\n\t"
- "fst.p %0, (13*8), fp26\n\t"
- "fst.p %0, (14*8), fp28\n\t"
- "fst.p %0, (15*8), fp30\n\t"
- "fst.p %0, (16*8), fp32\n\t"
- "fst.p %0, (17*8), fp34\n\t"
- "fst.p %0, (18*8), fp36\n\t"
- "fst.p %0, (19*8), fp38\n\t"
- "fst.p %0, (20*8), fp40\n\t"
- "fst.p %0, (21*8), fp42\n\t"
- "fst.p %0, (22*8), fp44\n\t"
- "fst.p %0, (23*8), fp46\n\t"
- "fst.p %0, (24*8), fp48\n\t"
- "fst.p %0, (25*8), fp50\n\t"
- "fst.p %0, (26*8), fp52\n\t"
- "fst.p %0, (27*8), fp54\n\t"
- "fst.p %0, (28*8), fp56\n\t"
- "fst.p %0, (29*8), fp58\n\t"
- "fst.p %0, (30*8), fp60\n\t"
- "fst.p %0, (31*8), fp62\n\t"
-
- "fgetscr fr63\n\t"
- "fst.s %0, (32*8), fr63\n\t"
- : /* no output */
- : "r" (&tsk->thread.xstate->hardfpu)
- : "memory");
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- asm volatile("fld.p %0, (0*8), fp0\n\t"
- "fld.p %0, (1*8), fp2\n\t"
- "fld.p %0, (2*8), fp4\n\t"
- "fld.p %0, (3*8), fp6\n\t"
- "fld.p %0, (4*8), fp8\n\t"
- "fld.p %0, (5*8), fp10\n\t"
- "fld.p %0, (6*8), fp12\n\t"
- "fld.p %0, (7*8), fp14\n\t"
- "fld.p %0, (8*8), fp16\n\t"
- "fld.p %0, (9*8), fp18\n\t"
- "fld.p %0, (10*8), fp20\n\t"
- "fld.p %0, (11*8), fp22\n\t"
- "fld.p %0, (12*8), fp24\n\t"
- "fld.p %0, (13*8), fp26\n\t"
- "fld.p %0, (14*8), fp28\n\t"
- "fld.p %0, (15*8), fp30\n\t"
- "fld.p %0, (16*8), fp32\n\t"
- "fld.p %0, (17*8), fp34\n\t"
- "fld.p %0, (18*8), fp36\n\t"
- "fld.p %0, (19*8), fp38\n\t"
- "fld.p %0, (20*8), fp40\n\t"
- "fld.p %0, (21*8), fp42\n\t"
- "fld.p %0, (22*8), fp44\n\t"
- "fld.p %0, (23*8), fp46\n\t"
- "fld.p %0, (24*8), fp48\n\t"
- "fld.p %0, (25*8), fp50\n\t"
- "fld.p %0, (26*8), fp52\n\t"
- "fld.p %0, (27*8), fp54\n\t"
- "fld.p %0, (28*8), fp56\n\t"
- "fld.p %0, (29*8), fp58\n\t"
- "fld.p %0, (30*8), fp60\n\t"
-
- "fld.s %0, (32*8), fr63\n\t"
- "fputscr fr63\n\t"
-
- "fld.p %0, (31*8), fp62\n\t"
- : /* no output */
- : "r" (&tsk->thread.xstate->hardfpu)
- : "memory");
-}
-
-asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
-{
- regs->pc += 4;
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c
deleted file mode 100644
index 94725018..0000000
--- a/arch/sh/kernel/cpu/sh5/probe.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/probe.c
- *
- * CPU Subtype Probing for SH-5.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/tlb.h>
-
-void cpu_probe(void)
-{
- unsigned long long cir;
-
- /*
- * Do peeks in real mode to avoid having to set up a mapping for
- * the WPC registers. On SH5-101 cut2, such a mapping would be
- * exposed to an address translation erratum which would make it
- * hard to set up correctly.
- */
- cir = peek_real_address_q(0x0d000008);
- if ((cir & 0xffff) == 0x5103)
- boot_cpu_data.type = CPU_SH5_103;
- else if (((cir >> 32) & 0xffff) == 0x51e2)
- /* CPU.VCR aliased at CIR address on SH5-101 */
- boot_cpu_data.type = CPU_SH5_101;
-
- boot_cpu_data.family = CPU_FAMILY_SH5;
-
- /*
- * First, setup some sane values for the I-cache.
- */
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.icache.sets = 256;
- boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.icache.way_incr = (1 << 13);
- boot_cpu_data.icache.entry_shift = 5;
- boot_cpu_data.icache.way_size = boot_cpu_data.icache.sets *
- boot_cpu_data.icache.linesz;
- boot_cpu_data.icache.entry_mask = 0x1fe0;
- boot_cpu_data.icache.flags = 0;
-
- /*
- * Next, setup some sane values for the D-cache.
- *
- * On the SH5, these are pretty consistent with the I-cache settings,
- * so we just copy over the existing definitions.. these can be fixed
- * up later, especially if we add runtime CPU probing.
- *
- * Though in the meantime it saves us from having to duplicate all of
- * the above definitions..
- */
- boot_cpu_data.dcache = boot_cpu_data.icache;
-
- /*
- * Setup any cache-related flags here
- */
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
-#elif defined(CONFIG_CACHE_WRITEBACK)
- set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
-#endif
-
- /* Setup some I/D TLB defaults */
- sh64_tlb_init();
-}
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
deleted file mode 100644
index dc8476d..0000000
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH5-101/SH5-103 CPU Setup
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sh_timer.h>
-#include <asm/addrspace.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .flags = UPF_IOREMAP,
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100),
- DEFINE_RES_IRQ(39),
- DEFINE_RES_IRQ(40),
- DEFINE_RES_IRQ(42),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = PHYS_PERIPHERAL_BLOCK + 0x01040000,
- .end = PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = IRQ_PRI,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = IRQ_CUI,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = IRQ_ATI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-#define TMU_BLOCK_OFF 0x01020000
-#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(TMU_BASE, 0x30),
- DEFINE_RES_IRQ(IRQ_TUNI0),
- DEFINE_RES_IRQ(IRQ_TUNI1),
- DEFINE_RES_IRQ(IRQ_TUNI2),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh5_early_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-static struct platform_device *sh5_devices[] __initdata = {
- &rtc_device,
-};
-
-static int __init sh5_devices_setup(void)
-{
- int ret;
-
- ret = platform_add_devices(sh5_early_devices,
- ARRAY_SIZE(sh5_early_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return platform_add_devices(sh5_devices,
- ARRAY_SIZE(sh5_devices));
-}
-arch_initcall(sh5_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh5_early_devices,
- ARRAY_SIZE(sh5_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh5/switchto.S b/arch/sh/kernel/cpu/sh5/switchto.S
deleted file mode 100644
index d1beff7..0000000
--- a/arch/sh/kernel/cpu/sh5/switchto.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh5/switchto.S
- *
- * sh64 context switch
- *
- * Copyright (C) 2004 Richard Curnow
-*/
-
- .section .text..SHmedia32,"ax"
- .little
-
- .balign 32
-
- .type sh64_switch_to,@function
- .global sh64_switch_to
- .global __sh64_switch_to_end
-sh64_switch_to:
-
-/* Incoming args
- r2 - prev
- r3 - &prev->thread
- r4 - next
- r5 - &next->thread
-
- Outgoing results
- r2 - last (=prev) : this just stays in r2 throughout
-
- Want to create a full (struct pt_regs) on the stack to allow backtracing
- functions to work. However, we only need to populate the callee-save
- register slots in this structure; since we're a function our ancestors must
- have themselves preserved all caller saved state in the stack. This saves
- some wasted effort since we won't need to look at the values.
-
- In particular, all caller-save registers are immediately available for
- scratch use.
-
-*/
-
-#define FRAME_SIZE (76*8 + 8)
-
- movi FRAME_SIZE, r0
- sub.l r15, r0, r15
- ! Do normal-style register save to support backtrace
-
- st.l r15, 0, r18 ! save link reg
- st.l r15, 4, r14 ! save fp
- add.l r15, r63, r14 ! setup frame pointer
-
- ! hopefully this looks normal to the backtrace now.
-
- addi.l r15, 8, r1 ! base of pt_regs
- addi.l r1, 24, r0 ! base of pt_regs.regs
- addi.l r0, (63*8), r8 ! base of pt_regs.trregs
-
- /* Note : to be fixed?
- struct pt_regs is really designed for holding the state on entry
- to an exception, i.e. pc,sr,regs etc. However, for the context
- switch state, some of this is not required. But the unwinder takes
- struct pt_regs * as an arg so we have to build this structure
- to allow unwinding switched tasks in show_state() */
-
- st.q r0, ( 9*8), r9
- st.q r0, (10*8), r10
- st.q r0, (11*8), r11
- st.q r0, (12*8), r12
- st.q r0, (13*8), r13
- st.q r0, (14*8), r14 ! for unwind, want to look as though we took a trap at
- ! the point where the process is left in suspended animation, i.e. current
- ! fp here, not the saved one.
- st.q r0, (16*8), r16
-
- st.q r0, (24*8), r24
- st.q r0, (25*8), r25
- st.q r0, (26*8), r26
- st.q r0, (27*8), r27
- st.q r0, (28*8), r28
- st.q r0, (29*8), r29
- st.q r0, (30*8), r30
- st.q r0, (31*8), r31
- st.q r0, (32*8), r32
- st.q r0, (33*8), r33
- st.q r0, (34*8), r34
- st.q r0, (35*8), r35
-
- st.q r0, (44*8), r44
- st.q r0, (45*8), r45
- st.q r0, (46*8), r46
- st.q r0, (47*8), r47
- st.q r0, (48*8), r48
- st.q r0, (49*8), r49
- st.q r0, (50*8), r50
- st.q r0, (51*8), r51
- st.q r0, (52*8), r52
- st.q r0, (53*8), r53
- st.q r0, (54*8), r54
- st.q r0, (55*8), r55
- st.q r0, (56*8), r56
- st.q r0, (57*8), r57
- st.q r0, (58*8), r58
- st.q r0, (59*8), r59
-
- ! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency)
- ! Use a local label to avoid creating a symbol that will confuse the !
- ! backtrace
- pta .Lsave_pc, tr0
-
- gettr tr5, r45
- gettr tr6, r46
- gettr tr7, r47
- st.q r8, (5*8), r45
- st.q r8, (6*8), r46
- st.q r8, (7*8), r47
-
- ! Now switch context
- gettr tr0, r9
- st.l r3, 0, r15 ! prev->thread.sp
- st.l r3, 8, r1 ! prev->thread.kregs
- st.l r3, 4, r9 ! prev->thread.pc
- st.q r1, 0, r9 ! save prev->thread.pc into pt_regs->pc
-
- ! Load PC for next task (init value or save_pc later)
- ld.l r5, 4, r18 ! next->thread.pc
- ! Switch stacks
- ld.l r5, 0, r15 ! next->thread.sp
- ptabs r18, tr0
-
- ! Update current
- ld.l r4, 4, r9 ! next->thread_info (2nd element of next task_struct)
- putcon r9, kcr0 ! current = next->thread_info
-
- ! go to save_pc for a reschedule, or the initial thread.pc for a new process
- blink tr0, r63
-
- ! Restore (when we come back to a previously saved task)
-.Lsave_pc:
- addi.l r15, 32, r0 ! r0 = next's regs
- addi.l r0, (63*8), r8 ! r8 = next's tr_regs
-
- ld.q r8, (5*8), r45
- ld.q r8, (6*8), r46
- ld.q r8, (7*8), r47
- ptabs r45, tr5
- ptabs r46, tr6
- ptabs r47, tr7
-
- ld.q r0, ( 9*8), r9
- ld.q r0, (10*8), r10
- ld.q r0, (11*8), r11
- ld.q r0, (12*8), r12
- ld.q r0, (13*8), r13
- ld.q r0, (14*8), r14
- ld.q r0, (16*8), r16
-
- ld.q r0, (24*8), r24
- ld.q r0, (25*8), r25
- ld.q r0, (26*8), r26
- ld.q r0, (27*8), r27
- ld.q r0, (28*8), r28
- ld.q r0, (29*8), r29
- ld.q r0, (30*8), r30
- ld.q r0, (31*8), r31
- ld.q r0, (32*8), r32
- ld.q r0, (33*8), r33
- ld.q r0, (34*8), r34
- ld.q r0, (35*8), r35
-
- ld.q r0, (44*8), r44
- ld.q r0, (45*8), r45
- ld.q r0, (46*8), r46
- ld.q r0, (47*8), r47
- ld.q r0, (48*8), r48
- ld.q r0, (49*8), r49
- ld.q r0, (50*8), r50
- ld.q r0, (51*8), r51
- ld.q r0, (52*8), r52
- ld.q r0, (53*8), r53
- ld.q r0, (54*8), r54
- ld.q r0, (55*8), r55
- ld.q r0, (56*8), r56
- ld.q r0, (57*8), r57
- ld.q r0, (58*8), r58
- ld.q r0, (59*8), r59
-
- ! epilogue
- ld.l r15, 0, r18
- ld.l r15, 4, r14
- ptabs r18, tr0
- movi FRAME_SIZE, r0
- add r15, r0, r15
- blink tr0, r63
-__sh64_switch_to_end:
-.LFE1:
- .size sh64_switch_to,.LFE1-sh64_switch_to
-
diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c
deleted file mode 100644
index 3cb0cd9..0000000
--- a/arch/sh/kernel/cpu/sh5/unwind.c
+++ /dev/null
@@ -1,342 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/unwind.c
- *
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <linux/kallsyms.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/unwinder.h>
-#include <asm/stacktrace.h>
-
-static u8 regcache[63];
-
-/*
- * Finding the previous stack frame isn't horribly straightforward as it is
- * on some other platforms. In the sh64 case, we don't have "linked" stack
- * frames, so we need to do a bit of work to determine the previous frame,
- * and in turn, the previous r14/r18 pair.
- *
- * There are generally a few cases which determine where we can find out
- * the r14/r18 values. In the general case, this can be determined by poking
- * around the prologue of the symbol PC is in (note that we absolutely must
- * have frame pointer support as well as the kernel symbol table mapped,
- * otherwise we can't even get this far).
- *
- * In other cases, such as the interrupt/exception path, we can poke around
- * the sp/fp.
- *
- * Notably, this entire approach is somewhat error prone, and in the event
- * that the previous frame cannot be determined, that's all we can do.
- * Either way, this still leaves us with a more correct backtrace then what
- * we would be able to come up with by walking the stack (which is garbage
- * for anything beyond the first frame).
- * -- PFM.
- */
-static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
- unsigned long *pprev_fp, unsigned long *pprev_pc,
- struct pt_regs *regs)
-{
- const char *sym;
- char namebuf[128];
- unsigned long offset;
- unsigned long prologue = 0;
- unsigned long fp_displacement = 0;
- unsigned long fp_prev = 0;
- unsigned long offset_r14 = 0, offset_r18 = 0;
- int i, found_prologue_end = 0;
-
- sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf);
- if (!sym)
- return -EINVAL;
-
- prologue = pc - offset;
- if (!prologue)
- return -EINVAL;
-
- /* Validate fp, to avoid risk of dereferencing a bad pointer later.
- Assume 128Mb since that's the amount of RAM on a Cayman. Modify
- when there is an SH-5 board with more. */
- if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) ||
- (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) ||
- ((fp & 7) != 0)) {
- return -EINVAL;
- }
-
- /*
- * Depth to walk, depth is completely arbitrary.
- */
- for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) {
- unsigned long op;
- u8 major, minor;
- u8 src, dest, disp;
-
- op = *(unsigned long *)prologue;
-
- major = (op >> 26) & 0x3f;
- src = (op >> 20) & 0x3f;
- minor = (op >> 16) & 0xf;
- disp = (op >> 10) & 0x3f;
- dest = (op >> 4) & 0x3f;
-
- /*
- * Stack frame creation happens in a number of ways.. in the
- * general case when the stack frame is less than 511 bytes,
- * it's generally created by an addi or addi.l:
- *
- * addi/addi.l r15, -FRAME_SIZE, r15
- *
- * in the event that the frame size is bigger than this, it's
- * typically created using a movi/sub pair as follows:
- *
- * movi FRAME_SIZE, rX
- * sub r15, rX, r15
- */
-
- switch (major) {
- case (0x00 >> 2):
- switch (minor) {
- case 0x8: /* add.l */
- case 0x9: /* add */
- /* Look for r15, r63, r14 */
- if (src == 15 && disp == 63 && dest == 14)
- found_prologue_end = 1;
-
- break;
- case 0xa: /* sub.l */
- case 0xb: /* sub */
- if (src != 15 || dest != 15)
- continue;
-
- fp_displacement -= regcache[disp];
- fp_prev = fp - fp_displacement;
- break;
- }
- break;
- case (0xa8 >> 2): /* st.l */
- if (src != 15)
- continue;
-
- switch (dest) {
- case 14:
- if (offset_r14 || fp_displacement == 0)
- continue;
-
- offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
- offset_r14 *= sizeof(unsigned long);
- offset_r14 += fp_displacement;
- break;
- case 18:
- if (offset_r18 || fp_displacement == 0)
- continue;
-
- offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
- offset_r18 *= sizeof(unsigned long);
- offset_r18 += fp_displacement;
- break;
- }
-
- break;
- case (0xcc >> 2): /* movi */
- if (dest >= 63) {
- printk(KERN_NOTICE "%s: Invalid dest reg %d "
- "specified in movi handler. Failed "
- "opcode was 0x%lx: ", __func__,
- dest, op);
-
- continue;
- }
-
- /* Sign extend */
- regcache[dest] =
- sign_extend64((((u64)op >> 10) & 0xffff), 9);
- break;
- case (0xd0 >> 2): /* addi */
- case (0xd4 >> 2): /* addi.l */
- /* Look for r15, -FRAME_SIZE, r15 */
- if (src != 15 || dest != 15)
- continue;
-
- /* Sign extended frame size.. */
- fp_displacement +=
- (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
- fp_prev = fp - fp_displacement;
- break;
- }
-
- if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev)
- break;
- }
-
- if (offset_r14 == 0 || fp_prev == 0) {
- if (!offset_r14)
- pr_debug("Unable to find r14 offset\n");
- if (!fp_prev)
- pr_debug("Unable to find previous fp\n");
-
- return -EINVAL;
- }
-
- /* For innermost leaf function, there might not be a offset_r18 */
- if (!*pprev_pc && (offset_r18 == 0))
- return -EINVAL;
-
- *pprev_fp = *(unsigned long *)(fp_prev + offset_r14);
-
- if (offset_r18)
- *pprev_pc = *(unsigned long *)(fp_prev + offset_r18);
-
- *pprev_pc &= ~1;
-
- return 0;
-}
-
-/*
- * Don't put this on the stack since we'll want to call in to
- * sh64_unwinder_dump() when we're close to underflowing the stack
- * anyway.
- */
-static struct pt_regs here_regs;
-
-extern const char syscall_ret;
-extern const char ret_from_syscall;
-extern const char ret_from_exception;
-extern const char ret_from_irq;
-
-static void sh64_unwind_inner(const struct stacktrace_ops *ops,
- void *data, struct pt_regs *regs);
-
-static inline void unwind_nested(const struct stacktrace_ops *ops, void *data,
- unsigned long pc, unsigned long fp)
-{
- if ((fp >= __MEMORY_START) &&
- ((fp & 7) == 0))
- sh64_unwind_inner(ops, data, (struct pt_regs *)fp);
-}
-
-static void sh64_unwind_inner(const struct stacktrace_ops *ops,
- void *data, struct pt_regs *regs)
-{
- unsigned long pc, fp;
- int ofs = 0;
- int first_pass;
-
- pc = regs->pc & ~1;
- fp = regs->regs[14];
-
- first_pass = 1;
- for (;;) {
- int cond;
- unsigned long next_fp, next_pc;
-
- if (pc == ((unsigned long)&syscall_ret & ~1)) {
- printk("SYSCALL\n");
- unwind_nested(ops, data, pc, fp);
- return;
- }
-
- if (pc == ((unsigned long)&ret_from_syscall & ~1)) {
- printk("SYSCALL (PREEMPTED)\n");
- unwind_nested(ops, data, pc, fp);
- return;
- }
-
- /* In this case, the PC is discovered by lookup_prev_stack_frame but
- it has 4 taken off it to look like the 'caller' */
- if (pc == ((unsigned long)&ret_from_exception & ~1)) {
- printk("EXCEPTION\n");
- unwind_nested(ops, data, pc, fp);
- return;
- }
-
- if (pc == ((unsigned long)&ret_from_irq & ~1)) {
- printk("IRQ\n");
- unwind_nested(ops, data, pc, fp);
- return;
- }
-
- cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) &&
- ((pc & 3) == 0) && ((fp & 7) == 0));
-
- pc -= ofs;
-
- ops->address(data, pc, 1);
-
- if (first_pass) {
- /* If the innermost frame is a leaf function, it's
- * possible that r18 is never saved out to the stack.
- */
- next_pc = regs->regs[18];
- } else {
- next_pc = 0;
- }
-
- if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) {
- ofs = sizeof(unsigned long);
- pc = next_pc & ~1;
- fp = next_fp;
- } else {
- printk("Unable to lookup previous stack frame\n");
- break;
- }
- first_pass = 0;
- }
-
- printk("\n");
-}
-
-static void sh64_unwinder_dump(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *sp,
- const struct stacktrace_ops *ops,
- void *data)
-{
- if (!regs) {
- /*
- * Fetch current regs if we have no other saved state to back
- * trace from.
- */
- regs = &here_regs;
-
- __asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14]));
- __asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15]));
- __asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18]));
-
- __asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0]));
- __asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1]));
- __asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2]));
- __asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3]));
- __asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4]));
- __asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5]));
- __asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6]));
- __asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7]));
-
- __asm__ __volatile__ (
- "pta 0f, tr0\n\t"
- "blink tr0, %0\n\t"
- "0: nop"
- : "=r" (regs->pc)
- );
- }
-
- sh64_unwind_inner(ops, data, regs);
-}
-
-static struct unwinder sh64_unwinder = {
- .name = "sh64-unwinder",
- .dump = sh64_unwinder_dump,
- .rating = 150,
-};
-
-static int __init sh64_unwinder_init(void)
-{
- return unwinder_register(&sh64_unwinder);
-}
-early_initcall(sh64_unwinder_init);
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
deleted file mode 100644
index 67685e1..0000000
--- a/arch/sh/kernel/head_64.S
+++ /dev/null
@@ -1,346 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/head_64.S
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-
-#include <linux/init.h>
-
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/tlb.h>
-#include <cpu/registers.h>
-#include <cpu/mmu_context.h>
-#include <asm/thread_info.h>
-
-/*
- * MMU defines: TLB boundaries.
- */
-
-#define MMUIR_FIRST ITLB_FIXED
-#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP
-#define MMUIR_STEP TLB_STEP
-
-#define MMUDR_FIRST DTLB_FIXED
-#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
-#define MMUDR_STEP TLB_STEP
-
-/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */
-#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1))
-#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb"
-#endif
-
-/*
- * MMU defines: Fixed TLBs.
- */
-/* Deal safely with the case where the base of RAM is not 512Mb aligned */
-
-#define ALIGN_512M_MASK (0xffffffffe0000000)
-#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
-#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
-
-#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE)
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-
-#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL)
- /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */
-
-#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL
- /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */
-
-#ifdef CONFIG_CACHE_OFF
-#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */
-#else
-#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
-#endif
-#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
-
-#if defined (CONFIG_CACHE_OFF)
-#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */
-#elif defined (CONFIG_CACHE_WRITETHROUGH)
-#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */
- /* WT, invalidate */
-#elif defined (CONFIG_CACHE_WRITEBACK)
-#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */
- /* WB, invalidate */
-#else
-#error preprocessor flag CONFIG_CACHE_... not recognized!
-#endif
-
-#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
-
- .section .empty_zero_page, "aw"
- .global empty_zero_page
-
-empty_zero_page:
- .long 1 /* MOUNT_ROOT_RDONLY */
- .long 0 /* RAMDISK_FLAGS */
- .long 0x0200 /* ORIG_ROOT_DEV */
- .long 1 /* LOADER_TYPE */
- .long 0x00800000 /* INITRD_START */
- .long 0x00800000 /* INITRD_SIZE */
- .long 0
-
- .text
- .balign 4096,0,4096
-
- .section .data, "aw"
- .balign PAGE_SIZE
-
- .section .data, "aw"
- .balign PAGE_SIZE
-
- .global mmu_pdtp_cache
-mmu_pdtp_cache:
- .space PAGE_SIZE, 0
-
- .global fpu_in_use
-fpu_in_use: .quad 0
-
-
- __HEAD
- .balign L1_CACHE_BYTES
-/*
- * Condition at the entry of __stext:
- * . Reset state:
- * . SR.FD = 1 (FPU disabled)
- * . SR.BL = 1 (Exceptions disabled)
- * . SR.MD = 1 (Privileged Mode)
- * . SR.MMU = 0 (MMU Disabled)
- * . SR.CD = 0 (CTC User Visible)
- * . SR.IMASK = Undefined (Interrupt Mask)
- *
- * Operations supposed to be performed by __stext:
- * . prevent speculative fetch onto device memory while MMU is off
- * . reflect as much as possible SH5 ABI (r15, r26, r27, r18)
- * . first, save CPU state and set it to something harmless
- * . any CPU detection and/or endianness settings (?)
- * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD
- * . set initial TLB entries for cached and uncached regions
- * (no fine granularity paging)
- * . set initial cache state
- * . enable MMU and caches
- * . set CPU to a consistent state
- * . registers (including stack pointer and current/KCR0)
- * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR
- * at this stage. This is all to later Linux initialization steps.
- * . initialize FPU
- * . clear BSS
- * . jump into start_kernel()
- * . be prepared to hopeless start_kernel() returns.
- *
- */
- .global _stext
-_stext:
- /*
- * Prevent speculative fetch on device memory due to
- * uninitialized target registers.
- */
- ptabs/u ZERO, tr0
- ptabs/u ZERO, tr1
- ptabs/u ZERO, tr2
- ptabs/u ZERO, tr3
- ptabs/u ZERO, tr4
- ptabs/u ZERO, tr5
- ptabs/u ZERO, tr6
- ptabs/u ZERO, tr7
- synci
-
- /*
- * Read/Set CPU state. After this block:
- * r29 = Initial SR
- */
- getcon SR, r29
- movi SR_HARMLESS, r20
- putcon r20, SR
-
- /*
- * Initialize EMI/LMI. To Be Done.
- */
-
- /*
- * CPU detection and/or endianness settings (?). To Be Done.
- * Pure PIC code here, please ! Just save state into r30.
- * After this block:
- * r30 = CPU type/Platform Endianness
- */
-
- /*
- * Set initial TLB entries for cached and uncached regions.
- * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
- */
- /* Clear ITLBs */
- pta clear_ITLB, tr1
- movi MMUIR_FIRST, r21
- movi MMUIR_END, r22
-clear_ITLB:
- putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */
- addi r21, MMUIR_STEP, r21
- bne r21, r22, tr1
-
- /* Clear DTLBs */
- pta clear_DTLB, tr1
- movi MMUDR_FIRST, r21
- movi MMUDR_END, r22
-clear_DTLB:
- putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */
- addi r21, MMUDR_STEP, r21
- bne r21, r22, tr1
-
- /* Map one big (512Mb) page for ITLB */
- movi MMUIR_FIRST, r21
- movi MMUIR_TEXT_L, r22 /* PTEL first */
- add.l r22, r63, r22 /* Sign extend */
- putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
- movi MMUIR_TEXT_H, r22 /* PTEH last */
- add.l r22, r63, r22 /* Sign extend */
- putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
-
- /* Map one big CACHED (512Mb) page for DTLB */
- movi MMUDR_FIRST, r21
- movi MMUDR_CACHED_L, r22 /* PTEL first */
- add.l r22, r63, r22 /* Sign extend */
- putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
- movi MMUDR_CACHED_H, r22 /* PTEH last */
- add.l r22, r63, r22 /* Sign extend */
- putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
-
- /*
- * Setup a DTLB translation for SCIF phys.
- */
- addi r21, MMUDR_STEP, r21
- movi 0x0a03, r22 /* SCIF phys */
- shori 0x0148, r22
- putcfg r21, 1, r22 /* PTEL first */
- movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */
- shori 0x0003, r22
- putcfg r21, 0, r22 /* PTEH last */
-
- /*
- * Set cache behaviours.
- */
- /* ICache */
- movi ICCR_BASE, r21
- movi ICCR0_INIT_VAL, r22
- movi ICCR1_INIT_VAL, r23
- putcfg r21, ICCR_REG0, r22
- putcfg r21, ICCR_REG1, r23
-
- /* OCache */
- movi OCCR_BASE, r21
- movi OCCR0_INIT_VAL, r22
- movi OCCR1_INIT_VAL, r23
- putcfg r21, OCCR_REG0, r22
- putcfg r21, OCCR_REG1, r23
-
-
- /*
- * Enable Caches and MMU. Do the first non-PIC jump.
- * Now head.S global variables, constants and externs
- * can be used.
- */
- getcon SR, r21
- movi SR_ENABLE_MMU, r22
- or r21, r22, r21
- putcon r21, SSR
- movi hyperspace, r22
- ori r22, 1, r22 /* Make it SHmedia, not required but..*/
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-hyperspace: /* ... that's the next instruction ! */
-
- /*
- * Set CPU to a consistent state.
- * r31 = FPU support flag
- * tr0/tr7 in use. Others give a chance to loop somewhere safe
- */
- movi start_kernel, r32
- ori r32, 1, r32
-
- ptabs r32, tr0 /* r32 = _start_kernel address */
- pta/u hopeless, tr1
- pta/u hopeless, tr2
- pta/u hopeless, tr3
- pta/u hopeless, tr4
- pta/u hopeless, tr5
- pta/u hopeless, tr6
- pta/u hopeless, tr7
- gettr tr1, r28 /* r28 = hopeless address */
-
- /* Set initial stack pointer */
- movi init_thread_union, SP
- putcon SP, KCR0 /* Set current to init_task */
- movi THREAD_SIZE, r22 /* Point to the end */
- add SP, r22, SP
-
- /*
- * Initialize FPU.
- * Keep FPU flag in r31. After this block:
- * r31 = FPU flag
- */
- movi fpu_in_use, r31 /* Temporary */
-
-#ifdef CONFIG_SH_FPU
- getcon SR, r21
- movi SR_ENABLE_FPU, r22
- and r21, r22, r22
- putcon r22, SR /* Try to enable */
- getcon SR, r22
- xor r21, r22, r21
- shlri r21, 15, r21 /* Supposedly 0/1 */
- st.q r31, 0 , r21 /* Set fpu_in_use */
-#else
- movi 0, r21
- st.q r31, 0 , r21 /* Set fpu_in_use */
-#endif
- or r21, ZERO, r31 /* Set FPU flag at last */
-
-#ifndef CONFIG_SH_NO_BSS_INIT
-/* Don't clear BSS if running on slow platforms such as an RTL simulation,
- remote memory via SHdebug link, etc. For these the memory can be guaranteed
- to be all zero on boot anyway. */
- /*
- * Clear bss
- */
- pta clear_quad, tr1
- movi __bss_start, r22
- movi _end, r23
-clear_quad:
- st.q r22, 0, ZERO
- addi r22, 8, r22
- bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */
-#endif
- pta/u hopeless, tr1
-
- /* Say bye to head.S but be prepared to wrongly get back ... */
- blink tr0, LINK
-
- /* If we ever get back here through LINK/tr1-tr7 */
- pta/u hopeless, tr7
-
-hopeless:
- /*
- * Something's badly wrong here. Loop endlessly,
- * there's nothing more we can do about it.
- *
- * Note on hopeless: it can be jumped into invariably
- * before or after jumping into hyperspace. The only
- * requirement is to be PIC called (PTA) before and
- * any way (PTA/PTABS) after. According to Virtual
- * to Physical mapping a simulator/emulator can easily
- * tell where we came here from just looking at hopeless
- * (PC) address.
- *
- * For debugging purposes:
- * (r28) hopeless/loop address
- * (r29) Original SR
- * (r30) CPU type/Platform endianness
- * (r31) FPU Support
- * (r32) _start_kernel address
- */
- blink tr7, ZERO
diff --git a/arch/sh/kernel/irq_64.c b/arch/sh/kernel/irq_64.c
deleted file mode 100644
index 7a1f504..0000000
--- a/arch/sh/kernel/irq_64.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SHmedia irqflags support
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- */
-#include <linux/irqflags.h>
-#include <linux/module.h>
-#include <cpu/registers.h>
-
-void notrace arch_local_irq_restore(unsigned long flags)
-{
- unsigned long long __dummy;
-
- if (flags == ARCH_IRQ_DISABLED) {
- __asm__ __volatile__ (
- "getcon " __SR ", %0\n\t"
- "or %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy)
- : "r" (ARCH_IRQ_DISABLED)
- );
- } else {
- __asm__ __volatile__ (
- "getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy)
- : "r" (~ARCH_IRQ_DISABLED)
- );
- }
-}
-EXPORT_SYMBOL(arch_local_irq_restore);
-
-unsigned long notrace arch_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "getcon " __SR ", %0\n\t"
- "and %0, %1, %0"
- : "=&r" (flags)
- : "r" (ARCH_IRQ_DISABLED)
- );
-
- return flags;
-}
-EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index bbc78d1..b9cee98 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -46,15 +46,6 @@
+ ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend;
-#ifdef CONFIG_SUPERH64
- /* For text addresses, bit2 of the st_other field indicates
- * whether the symbol is SHmedia (1) or SHcompact (0). If
- * SHmedia, the LSB of the symbol needs to be asserted
- * for the CPU to be in SHmedia mode when it starts executing
- * the branch target. */
- relocation |= !!(sym->st_other & 4);
-#endif
-
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_NONE:
break;
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 4d1bfc8..169832f 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -23,9 +23,7 @@
*/
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
-#ifdef CONFIG_SUPERH32
unlazy_fpu(src, task_pt_regs(src));
-#endif
*dst = *src;
if (src->thread.xstate) {
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
deleted file mode 100644
index c2844a2..0000000
--- a/arch/sh/kernel/process_64.c
+++ /dev/null
@@ -1,461 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/process_64.c
- *
- * This file handles the architecture-dependent parts of process handling..
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- * Started from SH3/4 version:
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- *
- * In turn started from i386 version:
- * Copyright (C) 1995 Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/ptrace.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <asm/syscalls.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/mmu_context.h>
-#include <asm/fpu.h>
-#include <asm/switch_to.h>
-
-struct task_struct *last_task_used_math = NULL;
-struct pt_regs fake_swapper_regs = { 0, };
-
-void show_regs(struct pt_regs *regs)
-{
- unsigned long long ah, al, bh, bl, ch, cl;
-
- printk("\n");
- show_regs_print_info(KERN_DEFAULT);
-
- ah = (regs->pc) >> 32;
- al = (regs->pc) & 0xffffffff;
- bh = (regs->regs[18]) >> 32;
- bl = (regs->regs[18]) & 0xffffffff;
- ch = (regs->regs[15]) >> 32;
- cl = (regs->regs[15]) & 0xffffffff;
- printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->sr) >> 32;
- al = (regs->sr) & 0xffffffff;
- asm volatile ("getcon " __TEA ", %0" : "=r" (bh));
- asm volatile ("getcon " __TEA ", %0" : "=r" (bl));
- bh = (bh) >> 32;
- bl = (bl) & 0xffffffff;
- asm volatile ("getcon " __KCR0 ", %0" : "=r" (ch));
- asm volatile ("getcon " __KCR0 ", %0" : "=r" (cl));
- ch = (ch) >> 32;
- cl = (cl) & 0xffffffff;
- printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[0]) >> 32;
- al = (regs->regs[0]) & 0xffffffff;
- bh = (regs->regs[1]) >> 32;
- bl = (regs->regs[1]) & 0xffffffff;
- ch = (regs->regs[2]) >> 32;
- cl = (regs->regs[2]) & 0xffffffff;
- printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[3]) >> 32;
- al = (regs->regs[3]) & 0xffffffff;
- bh = (regs->regs[4]) >> 32;
- bl = (regs->regs[4]) & 0xffffffff;
- ch = (regs->regs[5]) >> 32;
- cl = (regs->regs[5]) & 0xffffffff;
- printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[6]) >> 32;
- al = (regs->regs[6]) & 0xffffffff;
- bh = (regs->regs[7]) >> 32;
- bl = (regs->regs[7]) & 0xffffffff;
- ch = (regs->regs[8]) >> 32;
- cl = (regs->regs[8]) & 0xffffffff;
- printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[9]) >> 32;
- al = (regs->regs[9]) & 0xffffffff;
- bh = (regs->regs[10]) >> 32;
- bl = (regs->regs[10]) & 0xffffffff;
- ch = (regs->regs[11]) >> 32;
- cl = (regs->regs[11]) & 0xffffffff;
- printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[12]) >> 32;
- al = (regs->regs[12]) & 0xffffffff;
- bh = (regs->regs[13]) >> 32;
- bl = (regs->regs[13]) & 0xffffffff;
- ch = (regs->regs[14]) >> 32;
- cl = (regs->regs[14]) & 0xffffffff;
- printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[16]) >> 32;
- al = (regs->regs[16]) & 0xffffffff;
- bh = (regs->regs[17]) >> 32;
- bl = (regs->regs[17]) & 0xffffffff;
- ch = (regs->regs[19]) >> 32;
- cl = (regs->regs[19]) & 0xffffffff;
- printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[20]) >> 32;
- al = (regs->regs[20]) & 0xffffffff;
- bh = (regs->regs[21]) >> 32;
- bl = (regs->regs[21]) & 0xffffffff;
- ch = (regs->regs[22]) >> 32;
- cl = (regs->regs[22]) & 0xffffffff;
- printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[23]) >> 32;
- al = (regs->regs[23]) & 0xffffffff;
- bh = (regs->regs[24]) >> 32;
- bl = (regs->regs[24]) & 0xffffffff;
- ch = (regs->regs[25]) >> 32;
- cl = (regs->regs[25]) & 0xffffffff;
- printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[26]) >> 32;
- al = (regs->regs[26]) & 0xffffffff;
- bh = (regs->regs[27]) >> 32;
- bl = (regs->regs[27]) & 0xffffffff;
- ch = (regs->regs[28]) >> 32;
- cl = (regs->regs[28]) & 0xffffffff;
- printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[29]) >> 32;
- al = (regs->regs[29]) & 0xffffffff;
- bh = (regs->regs[30]) >> 32;
- bl = (regs->regs[30]) & 0xffffffff;
- ch = (regs->regs[31]) >> 32;
- cl = (regs->regs[31]) & 0xffffffff;
- printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[32]) >> 32;
- al = (regs->regs[32]) & 0xffffffff;
- bh = (regs->regs[33]) >> 32;
- bl = (regs->regs[33]) & 0xffffffff;
- ch = (regs->regs[34]) >> 32;
- cl = (regs->regs[34]) & 0xffffffff;
- printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[35]) >> 32;
- al = (regs->regs[35]) & 0xffffffff;
- bh = (regs->regs[36]) >> 32;
- bl = (regs->regs[36]) & 0xffffffff;
- ch = (regs->regs[37]) >> 32;
- cl = (regs->regs[37]) & 0xffffffff;
- printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[38]) >> 32;
- al = (regs->regs[38]) & 0xffffffff;
- bh = (regs->regs[39]) >> 32;
- bl = (regs->regs[39]) & 0xffffffff;
- ch = (regs->regs[40]) >> 32;
- cl = (regs->regs[40]) & 0xffffffff;
- printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[41]) >> 32;
- al = (regs->regs[41]) & 0xffffffff;
- bh = (regs->regs[42]) >> 32;
- bl = (regs->regs[42]) & 0xffffffff;
- ch = (regs->regs[43]) >> 32;
- cl = (regs->regs[43]) & 0xffffffff;
- printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[44]) >> 32;
- al = (regs->regs[44]) & 0xffffffff;
- bh = (regs->regs[45]) >> 32;
- bl = (regs->regs[45]) & 0xffffffff;
- ch = (regs->regs[46]) >> 32;
- cl = (regs->regs[46]) & 0xffffffff;
- printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[47]) >> 32;
- al = (regs->regs[47]) & 0xffffffff;
- bh = (regs->regs[48]) >> 32;
- bl = (regs->regs[48]) & 0xffffffff;
- ch = (regs->regs[49]) >> 32;
- cl = (regs->regs[49]) & 0xffffffff;
- printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[50]) >> 32;
- al = (regs->regs[50]) & 0xffffffff;
- bh = (regs->regs[51]) >> 32;
- bl = (regs->regs[51]) & 0xffffffff;
- ch = (regs->regs[52]) >> 32;
- cl = (regs->regs[52]) & 0xffffffff;
- printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[53]) >> 32;
- al = (regs->regs[53]) & 0xffffffff;
- bh = (regs->regs[54]) >> 32;
- bl = (regs->regs[54]) & 0xffffffff;
- ch = (regs->regs[55]) >> 32;
- cl = (regs->regs[55]) & 0xffffffff;
- printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[56]) >> 32;
- al = (regs->regs[56]) & 0xffffffff;
- bh = (regs->regs[57]) >> 32;
- bl = (regs->regs[57]) & 0xffffffff;
- ch = (regs->regs[58]) >> 32;
- cl = (regs->regs[58]) & 0xffffffff;
- printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[59]) >> 32;
- al = (regs->regs[59]) & 0xffffffff;
- bh = (regs->regs[60]) >> 32;
- bl = (regs->regs[60]) & 0xffffffff;
- ch = (regs->regs[61]) >> 32;
- cl = (regs->regs[61]) & 0xffffffff;
- printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[62]) >> 32;
- al = (regs->regs[62]) & 0xffffffff;
- bh = (regs->tregs[0]) >> 32;
- bl = (regs->tregs[0]) & 0xffffffff;
- ch = (regs->tregs[1]) >> 32;
- cl = (regs->tregs[1]) & 0xffffffff;
- printk("R62 : %08Lx%08Lx T0 : %08Lx%08Lx T1 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->tregs[2]) >> 32;
- al = (regs->tregs[2]) & 0xffffffff;
- bh = (regs->tregs[3]) >> 32;
- bl = (regs->tregs[3]) & 0xffffffff;
- ch = (regs->tregs[4]) >> 32;
- cl = (regs->tregs[4]) & 0xffffffff;
- printk("T2 : %08Lx%08Lx T3 : %08Lx%08Lx T4 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->tregs[5]) >> 32;
- al = (regs->tregs[5]) & 0xffffffff;
- bh = (regs->tregs[6]) >> 32;
- bl = (regs->tregs[6]) & 0xffffffff;
- ch = (regs->tregs[7]) >> 32;
- cl = (regs->tregs[7]) & 0xffffffff;
- printk("T5 : %08Lx%08Lx T6 : %08Lx%08Lx T7 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- /*
- * If we're in kernel mode, dump the stack too..
- */
- if (!user_mode(regs)) {
- void show_stack(struct task_struct *tsk, unsigned long *sp);
- unsigned long sp = regs->regs[15] & 0xffffffff;
- struct task_struct *tsk = get_current();
-
- tsk->thread.kregs = regs;
-
- show_stack(tsk, (unsigned long *)sp);
- }
-}
-
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(struct task_struct *tsk)
-{
- /*
- * See arch/sparc/kernel/process.c for the precedent for doing
- * this -- RPC.
- *
- * The SH-5 FPU save/restore approach relies on
- * last_task_used_math pointing to a live task_struct. When
- * another task tries to use the FPU for the 1st time, the FPUDIS
- * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the
- * existing FPU state to the FP regs field within
- * last_task_used_math before re-loading the new task's FPU state
- * (or initialising it if the FPU has been used before). So if
- * last_task_used_math is stale, and its page has already been
- * re-allocated for another use, the consequences are rather
- * grim. Unless we null it here, there is no other path through
- * which it would get safely nulled.
- */
-#ifdef CONFIG_SH_FPU
- if (last_task_used_math == tsk)
- last_task_used_math = NULL;
-#endif
-}
-
-void flush_thread(void)
-{
-
- /* Called by fs/exec.c (setup_new_exec) to remove traces of a
- * previously running executable. */
-#ifdef CONFIG_SH_FPU
- if (last_task_used_math == current) {
- last_task_used_math = NULL;
- }
- /* Force FPU state to be reinitialised after exec */
- clear_used_math();
-#endif
-
- /* if we are a kernel thread, about to change to user thread,
- * update kreg
- */
- if(current->thread.kregs==&fake_swapper_regs) {
- current->thread.kregs =
- ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1);
- current->thread.uregs = current->thread.kregs;
- }
-}
-
-void release_thread(struct task_struct *dead_task)
-{
- /* do nothing */
-}
-
-/* Fill in the fpu structure for a core dump.. */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
-{
-#ifdef CONFIG_SH_FPU
- int fpvalid;
- struct task_struct *tsk = current;
-
- fpvalid = !!tsk_used_math(tsk);
- if (fpvalid) {
- if (current == last_task_used_math) {
- enable_fpu();
- save_fpu(tsk);
- disable_fpu();
- last_task_used_math = 0;
- regs->sr |= SR_FD;
- }
-
- memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu));
- }
-
- return fpvalid;
-#else
- return 0; /* Task didn't use the fpu at all. */
-#endif
-}
-EXPORT_SYMBOL(dump_fpu);
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-int copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long arg, struct task_struct *p)
-{
- struct pt_regs *childregs;
-
-#ifdef CONFIG_SH_FPU
- /* can't happen for a kernel thread */
- if (last_task_used_math == current) {
- enable_fpu();
- save_fpu(current);
- disable_fpu();
- last_task_used_math = NULL;
- current_pt_regs()->sr |= SR_FD;
- }
-#endif
- /* Copy from sh version */
- childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1;
- p->thread.sp = (unsigned long) childregs;
-
- if (unlikely(p->flags & PF_KTHREAD)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- childregs->regs[2] = (unsigned long)arg;
- childregs->regs[3] = (unsigned long)usp;
- childregs->sr = (1 << 30); /* not user_mode */
- childregs->sr |= SR_FD; /* Invalidate FPU flag */
- p->thread.pc = (unsigned long) ret_from_kernel_thread;
- return 0;
- }
- *childregs = *current_pt_regs();
-
- /*
- * Sign extend the edited stack.
- * Note that thread.pc and thread.pc will stay
- * 32-bit wide and context switch must take care
- * of NEFF sign extension.
- */
- if (usp)
- childregs->regs[15] = neff_sign_extend(usp);
- p->thread.uregs = childregs;
-
- childregs->regs[9] = 0; /* Set return value for child */
- childregs->sr |= SR_FD; /* Invalidate FPU flag */
-
- p->thread.pc = (unsigned long) ret_from_fork;
-
- return 0;
-}
-
-#ifdef CONFIG_FRAME_POINTER
-static int in_sh64_switch_to(unsigned long pc)
-{
- extern char __sh64_switch_to_end;
- /* For a sleeping task, the PC is somewhere in the middle of the function,
- so we don't have to worry about masking the LSB off */
- return (pc >= (unsigned long) sh64_switch_to) &&
- (pc < (unsigned long) &__sh64_switch_to_end);
-}
-#endif
-
-unsigned long get_wchan(struct task_struct *p)
-{
- unsigned long pc;
-
- if (!p || p == current || p->state == TASK_RUNNING)
- return 0;
-
- /*
- * The same comment as on the Alpha applies here, too ...
- */
- pc = thread_saved_pc(p);
-
-#ifdef CONFIG_FRAME_POINTER
- if (in_sh64_switch_to(pc)) {
- unsigned long schedule_fp;
- unsigned long sh64_switch_to_fp;
- unsigned long schedule_caller_pc;
-
- sh64_switch_to_fp = (long) p->thread.sp;
- /* r14 is saved at offset 4 in the sh64_switch_to frame */
- schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);
-
- /* and the caller of 'schedule' is (currently!) saved at offset 24
- in the frame of schedule (from disasm) */
- schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24);
- return schedule_caller_pc;
- }
-#endif
- return pc;
-}
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
deleted file mode 100644
index 11085e4..0000000
--- a/arch/sh/kernel/ptrace_64.c
+++ /dev/null
@@ -1,576 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/ptrace_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * Started from SH3/4 version:
- * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- *
- * Original x86 implementation:
- * By Ross Biro 1/23/92
- * edited by Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/regset.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/* This mask defines the bits of the SR which the user is not allowed to
- change, which are everything except S, Q, M, PR, SZ, FR. */
-#define SR_MASK (0xffff8cfd)
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * This routine will get a word from the user area in the process kernel stack.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)(task->thread.uregs);
- stack += offset;
- return (*((int *)stack));
-}
-
-static inline unsigned long
-get_fpu_long(struct task_struct *task, unsigned long addr)
-{
- unsigned long tmp;
- struct pt_regs *regs;
- regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
-
- if (!tsk_used_math(task)) {
- if (addr == offsetof(struct user_fpu_struct, fpscr)) {
- tmp = FPSCR_INIT;
- } else {
- tmp = 0xffffffffUL; /* matches initial value in fpu.c */
- }
- return tmp;
- }
-
- if (last_task_used_math == task) {
- enable_fpu();
- save_fpu(task);
- disable_fpu();
- last_task_used_math = 0;
- regs->sr |= SR_FD;
- }
-
- tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)];
- return tmp;
-}
-
-/*
- * This routine will put a word into the user area in the process kernel stack.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
- unsigned long data)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)(task->thread.uregs);
- stack += offset;
- *(unsigned long *) stack = data;
- return 0;
-}
-
-static inline int
-put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
-{
- struct pt_regs *regs;
-
- regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
-
- if (!tsk_used_math(task)) {
- init_fpu(task);
- } else if (last_task_used_math == task) {
- enable_fpu();
- save_fpu(task);
- disable_fpu();
- last_task_used_math = 0;
- regs->sr |= SR_FD;
- }
-
- ((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data;
- return 0;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
- struct pt_regs *regs = child->thread.uregs;
-
- regs->sr |= SR_SSTEP; /* auto-resetting upon exception */
-
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
- struct pt_regs *regs = child->thread.uregs;
-
- regs->sr &= ~SR_SSTEP;
-
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-static int genregs_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- const struct pt_regs *regs = task_pt_regs(target);
- int ret;
-
- /* PC, SR, SYSCALL */
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- ®s->pc,
- 0, 3 * sizeof(unsigned long long));
-
- /* R1 -> R63 */
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- regs->regs,
- offsetof(struct pt_regs, regs[0]),
- 63 * sizeof(unsigned long long));
- /* TR0 -> TR7 */
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- regs->tregs,
- offsetof(struct pt_regs, tregs[0]),
- 8 * sizeof(unsigned long long));
-
- if (!ret)
- ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_regs), -1);
-
- return ret;
-}
-
-static int genregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_regs *regs = task_pt_regs(target);
- int ret;
-
- /* PC, SR, SYSCALL */
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s->pc,
- 0, 3 * sizeof(unsigned long long));
-
- /* R1 -> R63 */
- if (!ret && count > 0)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- regs->regs,
- offsetof(struct pt_regs, regs[0]),
- 63 * sizeof(unsigned long long));
-
- /* TR0 -> TR7 */
- if (!ret && count > 0)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- regs->tregs,
- offsetof(struct pt_regs, tregs[0]),
- 8 * sizeof(unsigned long long));
-
- if (!ret)
- ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_regs), -1);
-
- return ret;
-}
-
-#ifdef CONFIG_SH_FPU
-int fpregs_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->hardfpu, 0, -1);
-}
-
-static int fpregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- set_stopped_child_used_math(target);
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->hardfpu, 0, -1);
-}
-
-static int fpregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- return tsk_used_math(target) ? regset->n : 0;
-}
-#endif
-
-const struct pt_regs_offset regoffset_table[] = {
- REG_OFFSET_NAME(pc),
- REG_OFFSET_NAME(sr),
- REG_OFFSET_NAME(syscall_nr),
- REGS_OFFSET_NAME(0),
- REGS_OFFSET_NAME(1),
- REGS_OFFSET_NAME(2),
- REGS_OFFSET_NAME(3),
- REGS_OFFSET_NAME(4),
- REGS_OFFSET_NAME(5),
- REGS_OFFSET_NAME(6),
- REGS_OFFSET_NAME(7),
- REGS_OFFSET_NAME(8),
- REGS_OFFSET_NAME(9),
- REGS_OFFSET_NAME(10),
- REGS_OFFSET_NAME(11),
- REGS_OFFSET_NAME(12),
- REGS_OFFSET_NAME(13),
- REGS_OFFSET_NAME(14),
- REGS_OFFSET_NAME(15),
- REGS_OFFSET_NAME(16),
- REGS_OFFSET_NAME(17),
- REGS_OFFSET_NAME(18),
- REGS_OFFSET_NAME(19),
- REGS_OFFSET_NAME(20),
- REGS_OFFSET_NAME(21),
- REGS_OFFSET_NAME(22),
- REGS_OFFSET_NAME(23),
- REGS_OFFSET_NAME(24),
- REGS_OFFSET_NAME(25),
- REGS_OFFSET_NAME(26),
- REGS_OFFSET_NAME(27),
- REGS_OFFSET_NAME(28),
- REGS_OFFSET_NAME(29),
- REGS_OFFSET_NAME(30),
- REGS_OFFSET_NAME(31),
- REGS_OFFSET_NAME(32),
- REGS_OFFSET_NAME(33),
- REGS_OFFSET_NAME(34),
- REGS_OFFSET_NAME(35),
- REGS_OFFSET_NAME(36),
- REGS_OFFSET_NAME(37),
- REGS_OFFSET_NAME(38),
- REGS_OFFSET_NAME(39),
- REGS_OFFSET_NAME(40),
- REGS_OFFSET_NAME(41),
- REGS_OFFSET_NAME(42),
- REGS_OFFSET_NAME(43),
- REGS_OFFSET_NAME(44),
- REGS_OFFSET_NAME(45),
- REGS_OFFSET_NAME(46),
- REGS_OFFSET_NAME(47),
- REGS_OFFSET_NAME(48),
- REGS_OFFSET_NAME(49),
- REGS_OFFSET_NAME(50),
- REGS_OFFSET_NAME(51),
- REGS_OFFSET_NAME(52),
- REGS_OFFSET_NAME(53),
- REGS_OFFSET_NAME(54),
- REGS_OFFSET_NAME(55),
- REGS_OFFSET_NAME(56),
- REGS_OFFSET_NAME(57),
- REGS_OFFSET_NAME(58),
- REGS_OFFSET_NAME(59),
- REGS_OFFSET_NAME(60),
- REGS_OFFSET_NAME(61),
- REGS_OFFSET_NAME(62),
- REGS_OFFSET_NAME(63),
- TREGS_OFFSET_NAME(0),
- TREGS_OFFSET_NAME(1),
- TREGS_OFFSET_NAME(2),
- TREGS_OFFSET_NAME(3),
- TREGS_OFFSET_NAME(4),
- TREGS_OFFSET_NAME(5),
- TREGS_OFFSET_NAME(6),
- TREGS_OFFSET_NAME(7),
- REG_OFFSET_END,
-};
-
-/*
- * These are our native regset flavours.
- */
-enum sh_regset {
- REGSET_GENERAL,
-#ifdef CONFIG_SH_FPU
- REGSET_FPU,
-#endif
-};
-
-static const struct user_regset sh_regsets[] = {
- /*
- * Format is:
- * PC, SR, SYSCALL,
- * R1 --> R63,
- * TR0 --> TR7,
- */
- [REGSET_GENERAL] = {
- .core_note_type = NT_PRSTATUS,
- .n = ELF_NGREG,
- .size = sizeof(long long),
- .align = sizeof(long long),
- .get = genregs_get,
- .set = genregs_set,
- },
-
-#ifdef CONFIG_SH_FPU
- [REGSET_FPU] = {
- .core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_fpu_struct) /
- sizeof(long long),
- .size = sizeof(long long),
- .align = sizeof(long long),
- .get = fpregs_get,
- .set = fpregs_set,
- .active = fpregs_active,
- },
-#endif
-};
-
-static const struct user_regset_view user_sh64_native_view = {
- .name = "sh64",
- .e_machine = EM_SH,
- .regsets = sh_regsets,
- .n = ARRAY_SIZE(sh_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
- return &user_sh64_native_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret;
- unsigned long __user *datap = (unsigned long __user *) data;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if ((addr & 3) || addr < 0)
- break;
-
- if (addr < sizeof(struct pt_regs))
- tmp = get_stack_long(child, addr);
- else if ((addr >= offsetof(struct user, fpu)) &&
- (addr < offsetof(struct user, u_fpvalid))) {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- tmp = get_fpu_long(child, index);
- } else if (addr == offsetof(struct user, u_fpvalid)) {
- tmp = !!tsk_used_math(child);
- } else {
- break;
- }
- ret = put_user(tmp, datap);
- break;
- }
-
- case PTRACE_POKEUSR:
- /* write the word at location addr in the USER area. We must
- disallow any changes to certain SR bits or u_fpvalid, since
- this could crash the kernel or result in a security
- loophole. */
- ret = -EIO;
- if ((addr & 3) || addr < 0)
- break;
-
- if (addr < sizeof(struct pt_regs)) {
- /* Ignore change of top 32 bits of SR */
- if (addr == offsetof (struct pt_regs, sr)+4)
- {
- ret = 0;
- break;
- }
- /* If lower 32 bits of SR, ignore non-user bits */
- if (addr == offsetof (struct pt_regs, sr))
- {
- long cursr = get_stack_long(child, addr);
- data &= ~(SR_MASK);
- data |= (cursr & SR_MASK);
- }
- ret = put_stack_long(child, addr, data);
- }
- else if ((addr >= offsetof(struct user, fpu)) &&
- (addr < offsetof(struct user, u_fpvalid))) {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- ret = put_fpu_long(child, index, data);
- }
- break;
-
- case PTRACE_GETREGS:
- return copy_regset_to_user(child, &user_sh64_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
- case PTRACE_SETREGS:
- return copy_regset_from_user(child, &user_sh64_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
-#ifdef CONFIG_SH_FPU
- case PTRACE_GETFPREGS:
- return copy_regset_to_user(child, &user_sh64_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
- case PTRACE_SETFPREGS:
- return copy_regset_from_user(child, &user_sh64_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
-#endif
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
-
- return ret;
-}
-
-asmlinkage int sh64_ptrace(long request, long pid,
- unsigned long addr, unsigned long data)
-{
-#define WPC_DBRMODE 0x0d104008
- static unsigned long first_call;
-
- if (!test_and_set_bit(0, &first_call)) {
- /* Set WPC.DBRMODE to 0. This makes all debug events get
- * delivered through RESVEC, i.e. into the handlers in entry.S.
- * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
- * would normally be left set to 1, which makes debug events get
- * delivered through DBRVEC, i.e. into the remote gdb's
- * handlers. This prevents ptrace getting them, and confuses
- * the remote gdb.) */
- printk("DBRMODE set to 0 to permit native debugging\n");
- poke_real_address_q(WPC_DBRMODE, 0);
- }
-
- return sys_ptrace(request, pid, addr, data);
-}
-
-asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
-{
- long long ret = 0;
-
- secure_computing_strict(regs->regs[9]);
-
- if (test_thread_flag(TIF_SYSCALL_TRACE) &&
- tracehook_report_syscall_entry(regs))
- /*
- * Tracing decided this syscall should not happen.
- * We'll return a bogus call number to get an ENOSYS
- * error, but leave the original number in regs->regs[0].
- */
- ret = -1LL;
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_enter(regs, regs->regs[9]);
-
- audit_syscall_entry(regs->regs[1], regs->regs[2], regs->regs[3],
- regs->regs[4], regs->regs[5]);
-
- return ret ?: regs->regs[9];
-}
-
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
-{
- int step;
-
- audit_syscall_exit(regs);
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[9]);
-
- step = test_thread_flag(TIF_SINGLESTEP);
- if (step || test_thread_flag(TIF_SYSCALL_TRACE))
- tracehook_report_syscall_exit(regs, step);
-}
-
-/* Called with interrupts disabled */
-asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs)
-{
- /* This is called after a single step exception (DEBUGSS).
- There is no need to change the PC, as it is a post-execution
- exception, as entry.S does not do anything to the PC for DEBUGSS.
- We need to clear the Single Step setting in SR to avoid
- continually stepping. */
- local_irq_enable();
- regs->sr &= ~SR_SSTEP;
- force_sig(SIGTRAP);
-}
-
-/* Called with interrupts disabled */
-BUILD_TRAP_HANDLER(breakpoint)
-{
- TRAP_HANDLER_DECL;
-
- /* We need to forward step the PC, to counteract the backstep done
- in signal.c. */
- local_irq_enable();
- force_sig(SIGTRAP);
- regs->pc += 4;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
index 11001a8..5c33f03 100644
--- a/arch/sh/kernel/reboot.c
+++ b/arch/sh/kernel/reboot.c
@@ -4,9 +4,7 @@
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/module.h>
-#ifdef CONFIG_SUPERH32
#include <asm/watchdog.h>
-#endif
#include <asm/addrspace.h>
#include <asm/reboot.h>
#include <asm/tlbflush.h>
@@ -15,13 +13,11 @@
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-#ifdef CONFIG_SUPERH32
static void watchdog_trigger_immediate(void)
{
sh_wdt_write_cnt(0xFF);
sh_wdt_write_csr(0xC2);
}
-#endif
static void native_machine_restart(char * __unused)
{
@@ -33,10 +29,8 @@
/* Address error with SR.BL=1 first. */
trigger_address_error();
-#ifdef CONFIG_SUPERH32
/* If that fails or is unsupported, go for the watchdog next. */
watchdog_trigger_immediate();
-#endif
/*
* Give up and sleep.
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 2827744..5858936 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -38,6 +38,13 @@
DECLARE_EXPORT(__lshrsi3_r0);
DECLARE_EXPORT(__ashrsi3_r0);
DECLARE_EXPORT(__ashlsi3_r0);
+
+DECLARE_EXPORT(__ashiftrt_r4_0);
+DECLARE_EXPORT(__ashiftrt_r4_1);
+DECLARE_EXPORT(__ashiftrt_r4_2);
+DECLARE_EXPORT(__ashiftrt_r4_3);
+DECLARE_EXPORT(__ashiftrt_r4_4);
+DECLARE_EXPORT(__ashiftrt_r4_5);
DECLARE_EXPORT(__ashiftrt_r4_6);
DECLARE_EXPORT(__ashiftrt_r4_7);
DECLARE_EXPORT(__ashiftrt_r4_8);
@@ -48,13 +55,23 @@
DECLARE_EXPORT(__ashiftrt_r4_13);
DECLARE_EXPORT(__ashiftrt_r4_14);
DECLARE_EXPORT(__ashiftrt_r4_15);
+DECLARE_EXPORT(__ashiftrt_r4_16);
+DECLARE_EXPORT(__ashiftrt_r4_17);
+DECLARE_EXPORT(__ashiftrt_r4_18);
+DECLARE_EXPORT(__ashiftrt_r4_19);
DECLARE_EXPORT(__ashiftrt_r4_20);
DECLARE_EXPORT(__ashiftrt_r4_21);
DECLARE_EXPORT(__ashiftrt_r4_22);
DECLARE_EXPORT(__ashiftrt_r4_23);
DECLARE_EXPORT(__ashiftrt_r4_24);
+DECLARE_EXPORT(__ashiftrt_r4_25);
+DECLARE_EXPORT(__ashiftrt_r4_26);
DECLARE_EXPORT(__ashiftrt_r4_27);
+DECLARE_EXPORT(__ashiftrt_r4_28);
+DECLARE_EXPORT(__ashiftrt_r4_29);
DECLARE_EXPORT(__ashiftrt_r4_30);
+DECLARE_EXPORT(__ashiftrt_r4_31);
+DECLARE_EXPORT(__ashiftrt_r4_32);
DECLARE_EXPORT(__movstr);
DECLARE_EXPORT(__movstrSI8);
DECLARE_EXPORT(__movstrSI12);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
deleted file mode 100644
index 9de1706..0000000
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/sh_ksyms_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- */
-#include <linux/rwsem.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/irq.h>
-
-EXPORT_SYMBOL(__put_user_asm_b);
-EXPORT_SYMBOL(__put_user_asm_w);
-EXPORT_SYMBOL(__put_user_asm_l);
-EXPORT_SYMBOL(__put_user_asm_q);
-EXPORT_SYMBOL(__get_user_asm_b);
-EXPORT_SYMBOL(__get_user_asm_w);
-EXPORT_SYMBOL(__get_user_asm_l);
-EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcpy);
-
-/* Ugh. These come in from libgcc.a at link time. */
-#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
-
-DECLARE_EXPORT(__sdivsi3);
-DECLARE_EXPORT(__sdivsi3_1);
-DECLARE_EXPORT(__sdivsi3_2);
-DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__div_table);
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
deleted file mode 100644
index b9aaa92..0000000
--- a/arch/sh/kernel/signal_64.c
+++ /dev/null
@@ -1,567 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/signal_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2008 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/tracehook.h>
-#include <asm/ucontext.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
-#include <asm/fpu.h>
-
-#define REG_RET 9
-#define REG_ARG1 2
-#define REG_ARG2 3
-#define REG_ARG3 4
-#define REG_SP 15
-#define REG_PR 18
-#define REF_REG_RET regs->regs[REG_RET]
-#define REF_REG_SP regs->regs[REG_SP]
-#define DEREF_REG_PR regs->regs[REG_PR]
-
-#define DEBUG_SIG 0
-
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs);
-
-static inline void
-handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
-{
- /* If we're not from a syscall, bail out */
- if (regs->syscall_nr < 0)
- return;
-
- /* check for system call restart.. */
- switch (regs->regs[REG_RET]) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- no_system_call_restart:
- regs->regs[REG_RET] = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(sa->sa_flags & SA_RESTART))
- goto no_system_call_restart;
- /* fallthrough */
- case -ERESTARTNOINTR:
- /* Decode syscall # */
- regs->regs[REG_RET] = regs->syscall_nr;
- regs->pc -= 4;
- break;
- }
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs)
-{
- struct ksignal ksig;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return;
-
- if (get_signal(&ksig)) {
- handle_syscall_restart(regs, &ksig.ka.sa);
-
- /* Whee! Actually deliver the signal. */
- handle_signal(&ksig, regs);
- return;
- }
-
- /* Did we come from a system call? */
- if (regs->syscall_nr >= 0) {
- /* Restart the system call - no handlers present */
- switch (regs->regs[REG_RET]) {
- case -ERESTARTNOHAND:
- case -ERESTARTSYS:
- case -ERESTARTNOINTR:
- /* Decode Syscall # */
- regs->regs[REG_RET] = regs->syscall_nr;
- regs->pc -= 4;
- break;
-
- case -ERESTART_RESTARTBLOCK:
- regs->regs[REG_RET] = __NR_restart_syscall;
- regs->pc -= 4;
- break;
- }
- }
-
- /* No signal to deliver -- put the saved sigmask back */
- restore_saved_sigmask();
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-struct sigframe {
- struct sigcontext sc;
- unsigned long extramask[_NSIG_WORDS-1];
- long long retcode[2];
-};
-
-struct rt_sigframe {
- struct siginfo __user *pinfo;
- void *puc;
- struct siginfo info;
- struct ucontext uc;
- long long retcode[2];
-};
-
-#ifdef CONFIG_SH_FPU
-static inline int
-restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
- int err = 0;
- int fpvalid;
-
- err |= __get_user (fpvalid, &sc->sc_fpvalid);
- conditional_used_math(fpvalid);
- if (! fpvalid)
- return err;
-
- if (current == last_task_used_math) {
- last_task_used_math = NULL;
- regs->sr |= SR_FD;
- }
-
- err |= __copy_from_user(¤t->thread.xstate->hardfpu, &sc->sc_fpregs[0],
- (sizeof(long long) * 32) + (sizeof(int) * 1));
-
- return err;
-}
-
-static inline int
-setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
- int err = 0;
- int fpvalid;
-
- fpvalid = !!used_math();
- err |= __put_user(fpvalid, &sc->sc_fpvalid);
- if (! fpvalid)
- return err;
-
- if (current == last_task_used_math) {
- enable_fpu();
- save_fpu(current);
- disable_fpu();
- last_task_used_math = NULL;
- regs->sr |= SR_FD;
- }
-
- err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.xstate->hardfpu,
- (sizeof(long long) * 32) + (sizeof(int) * 1));
- clear_used_math();
-
- return err;
-}
-#else
-static inline int
-restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
- return 0;
-}
-static inline int
-setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
- return 0;
-}
-#endif
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p)
-{
- unsigned int err = 0;
- unsigned long long current_sr, new_sr;
-#define SR_MASK 0xffff8cfd
-
-#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
-
- COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]);
- COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]);
- COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]);
- COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]);
- COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]);
- COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]);
- COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]);
- COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]);
- COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]);
- COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]);
- COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]);
- COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]);
- COPY(regs[60]); COPY(regs[61]); COPY(regs[62]);
- COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]);
- COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]);
-
- /* Prevent the signal handler manipulating SR in a way that can
- crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be
- modified */
- current_sr = regs->sr;
- err |= __get_user(new_sr, &sc->sc_sr);
- regs->sr &= SR_MASK;
- regs->sr |= (new_sr & ~SR_MASK);
-
- COPY(pc);
-
-#undef COPY
-
- /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr
- * has been restored above.) */
- err |= restore_sigcontext_fpu(regs, sc);
-
- regs->syscall_nr = -1; /* disable syscall checks */
- err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]);
- return err;
-}
-
-asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
- unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs * regs)
-{
- struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP;
- sigset_t set;
- long long ret;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->sc, &ret))
- goto badframe;
- regs->pc -= 4;
-
- return (int) ret;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
- unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs * regs)
-{
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
- sigset_t set;
- long long ret;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret))
- goto badframe;
- regs->pc -= 4;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return (int) ret;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
- /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */
- err |= setup_sigcontext_fpu(regs, sc);
-
-#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
-
- COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]);
- COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]);
- COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]);
- COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]);
- COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]);
- COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]);
- COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]);
- COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]);
- COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]);
- COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]);
- COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]);
- COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]);
- COPY(regs[60]); COPY(regs[61]); COPY(regs[62]);
- COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]);
- COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]);
- COPY(sr); COPY(pc);
-
-#undef COPY
-
- err |= __put_user(mask, &sc->oldmask);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
- if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
- sp = current->sas_ss_sp + current->sas_ss_size;
-
- return (void __user *)((sp - frame_size) & -8ul);
-}
-
-void sa_default_restorer(void); /* See comments below */
-void sa_default_rt_restorer(void); /* See comments below */
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
-{
- struct sigframe __user *frame;
- int err = 0, sig = ksig->sig;
- int signal;
-
- frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
- /* Give up earlier as i386, in case */
- if (err)
- return -EFAULT;
-
- if (_NSIG_WORDS > 1) {
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask)); }
-
- /* Give up earlier as i386, in case */
- if (err)
- return -EFAULT;
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- /*
- * On SH5 all edited pointers are subject to NEFF
- */
- DEREF_REG_PR = neff_sign_extend((unsigned long)
- ksig->ka->sa.sa_restorer | 0x1);
- } else {
- /*
- * Different approach on SH5.
- * . Endianness independent asm code gets placed in entry.S .
- * This is limited to four ASM instructions corresponding
- * to two long longs in size.
- * . err checking is done on the else branch only
- * . flush_icache_range() is called upon __put_user() only
- * . all edited pointers are subject to NEFF
- * . being code, linker turns ShMedia bit on, always
- * dereference index -1.
- */
- DEREF_REG_PR = neff_sign_extend((unsigned long)
- frame->retcode | 0x01);
-
- if (__copy_to_user(frame->retcode,
- (void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
- return -EFAULT;
-
- /* Cohere the trampoline with the I-cache. */
- flush_cache_sigtramp(DEREF_REG_PR-1);
- }
-
- /*
- * Set up registers for signal handler.
- * All edited pointers are subject to NEFF.
- */
- regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
- regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
-
- /* FIXME:
- The glibc profiling support for SH-5 needs to be passed a sigcontext
- so it can retrieve the PC. At some point during 2003 the glibc
- support was changed to receive the sigcontext through the 2nd
- argument, but there are still versions of libc.so in use that use
- the 3rd argument. Until libc.so is stabilised, pass the sigcontext
- through both 2nd and 3rd arguments.
- */
-
- regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
- regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
-
- regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
-
- /* Broken %016Lx */
- pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
- sig, current->comm, current->pid, frame,
- regs->pc >> 32, regs->pc & 0xffffffff,
- DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
-
- return 0;
-}
-
-static int setup_rt_frame(struct ksignal *kig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
- /* Give up earlier as i386, in case */
- if (err)
- return -EFAULT;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->regs[REG_SP]);
- err |= setup_sigcontext(&frame->uc.uc_mcontext,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
- /* Give up earlier as i386, in case */
- if (err)
- return -EFAULT;
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- /*
- * On SH5 all edited pointers are subject to NEFF
- */
- DEREF_REG_PR = neff_sign_extend((unsigned long)
- ksig->ka.sa.sa_restorer | 0x1);
- } else {
- /*
- * Different approach on SH5.
- * . Endianness independent asm code gets placed in entry.S .
- * This is limited to four ASM instructions corresponding
- * to two long longs in size.
- * . err checking is done on the else branch only
- * . flush_icache_range() is called upon __put_user() only
- * . all edited pointers are subject to NEFF
- * . being code, linker turns ShMedia bit on, always
- * dereference index -1.
- */
- DEREF_REG_PR = neff_sign_extend((unsigned long)
- frame->retcode | 0x01);
-
- if (__copy_to_user(frame->retcode,
- (void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
- return -EFAULT;
-
- /* Cohere the trampoline with the I-cache. */
- flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
- }
-
- /*
- * Set up registers for signal handler.
- * All edited pointers are subject to NEFF.
- */
- regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
- regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
- regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
- regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
- regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
-
- pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
- sig, current->comm, current->pid, frame,
- regs->pc >> 32, regs->pc & 0xffffffff,
- DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
-
- return 0;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
-
- /* Set up the stack frame */
- if (ksig->ka.sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(ksig, oldset, regs);
- else
- ret = setup_frame(ksig, oldset, regs);
-
- signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
-{
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- }
-}
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
deleted file mode 100644
index 1bcb86f..0000000
--- a/arch/sh/kernel/syscalls_64.S
+++ /dev/null
@@ -1,419 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/syscalls_64.S
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 - 2007 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- */
-
-#include <linux/sys.h>
-
- .section .data, "aw"
- .balign 32
-
-/*
- * System calls jump table
- */
- .globl sys_call_table
-sys_call_table:
- .long sys_restart_syscall /* 0 - old "setup()" system call */
- .long sys_exit
- .long sys_fork
- .long sys_read
- .long sys_write
- .long sys_open /* 5 */
- .long sys_close
- .long sys_waitpid
- .long sys_creat
- .long sys_link
- .long sys_unlink /* 10 */
- .long sys_execve
- .long sys_chdir
- .long sys_time
- .long sys_mknod
- .long sys_chmod /* 15 */
- .long sys_lchown16
- .long sys_ni_syscall /* old break syscall holder */
- .long sys_stat
- .long sys_lseek
- .long sys_getpid /* 20 */
- .long sys_mount
- .long sys_oldumount
- .long sys_setuid16
- .long sys_getuid16
- .long sys_stime /* 25 */
- .long sh64_ptrace
- .long sys_alarm
- .long sys_fstat
- .long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
- .long sys_access
- .long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
- .long sys_rmdir /* 40 */
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
- .long sys_setgid16
- .long sys_getgid16
- .long sys_signal
- .long sys_geteuid16
- .long sys_getegid16 /* 50 */
- .long sys_acct
- .long sys_umount /* recycled never used phys( */
- .long sys_ni_syscall /* old lock syscall holder */
- .long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
- .long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
- .long sys_ni_syscall /* sys_olduname */
- .long sys_umask /* 60 */
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
- .long sys_getpgrp /* 65 */
- .long sys_setsid
- .long sys_sigaction
- .long sys_sgetmask
- .long sys_ssetmask
- .long sys_setreuid16 /* 70 */
- .long sys_setregid16
- .long sys_sigsuspend
- .long sys_sigpending
- .long sys_sethostname
- .long sys_setrlimit /* 75 */
- .long sys_old_getrlimit
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
- .long sys_getgroups16 /* 80 */
- .long sys_setgroups16
- .long sys_ni_syscall /* sys_oldselect */
- .long sys_symlink
- .long sys_lstat
- .long sys_readlink /* 85 */
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long sys_old_readdir
- .long old_mmap /* 90 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
- .long sys_fchown16 /* 95 */
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
- .long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall /* ioperm */
- .long sys_socketcall /* Obsolete implementation of socket syscall */
- .long sys_syslog
- .long sys_setitimer
- .long sys_getitimer /* 105 */
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_uname
- .long sys_ni_syscall /* 110 */ /* iopl */
- .long sys_vhangup
- .long sys_ni_syscall /* idle */
- .long sys_ni_syscall /* vm86old */
- .long sys_wait4
- .long sys_swapoff /* 115 */
- .long sys_sysinfo
- .long sys_ipc /* Obsolete ipc syscall implementation */
- .long sys_fsync
- .long sys_sigreturn
- .long sys_clone /* 120 */
- .long sys_setdomainname
- .long sys_newuname
- .long sys_cacheflush /* x86: sys_modify_ldt */
- .long sys_adjtimex
- .long sys_mprotect /* 125 */
- .long sys_sigprocmask
- .long sys_ni_syscall /* old "create_module" */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* 130: old "get_kernel_syms" */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
- .long sys_sysfs /* 135 */
- .long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
- .long sys_llseek /* 140 */
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_msync
- .long sys_readv /* 145 */
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
- .long sys_mlock /* 150 */
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
- .long sys_sched_get_priority_min /* 160 */
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_mremap
- .long sys_setresuid16
- .long sys_getresuid16 /* 165 */
- .long sys_ni_syscall /* vm86 */
- .long sys_ni_syscall /* old "query_module" */
- .long sys_poll
- .long sys_ni_syscall /* was nfsservctl */
- .long sys_setresgid16 /* 170 */
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn
- .long sys_rt_sigaction
- .long sys_rt_sigprocmask /* 175 */
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend
- .long sys_pread64 /* 180 */
- .long sys_pwrite64
- .long sys_chown16
- .long sys_getcwd
- .long sys_capget
- .long sys_capset /* 185 */
- .long sys_sigaltstack
- .long sys_sendfile
- .long sys_ni_syscall /* getpmsg */
- .long sys_ni_syscall /* putpmsg */
- .long sys_vfork /* 190 */
- .long sys_getrlimit
- .long sys_mmap2
- .long sys_truncate64
- .long sys_ftruncate64
- .long sys_stat64 /* 195 */
- .long sys_lstat64
- .long sys_fstat64
- .long sys_lchown
- .long sys_getuid
- .long sys_getgid /* 200 */
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
- .long sys_getgroups /* 205 */
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
- .long sys_setresgid /* 210 */
- .long sys_getresgid
- .long sys_chown
- .long sys_setuid
- .long sys_setgid
- .long sys_setfsuid /* 215 */
- .long sys_setfsgid
- .long sys_pivot_root
- .long sys_mincore
- .long sys_madvise
- /* Broken-out socket family (maintain backwards compatibility in syscall
- numbering with 2.4) */
- .long sys_socket /* 220 */
- .long sys_bind
- .long sys_connect
- .long sys_listen
- .long sys_accept
- .long sys_getsockname /* 225 */
- .long sys_getpeername
- .long sys_socketpair
- .long sys_send
- .long sys_sendto
- .long sys_recv /* 230*/
- .long sys_recvfrom
- .long sys_shutdown
- .long sys_setsockopt
- .long sys_getsockopt
- .long sys_sendmsg /* 235 */
- .long sys_recvmsg
- /* Broken-out IPC family (maintain backwards compatibility in syscall
- numbering with 2.4) */
- .long sys_semop
- .long sys_semget
- .long sys_semctl
- .long sys_msgsnd /* 240 */
- .long sys_msgrcv
- .long sys_msgget
- .long sys_msgctl
- .long sys_shmat
- .long sys_shmdt /* 245 */
- .long sys_shmget
- .long sys_shmctl
- /* Rest of syscalls listed in 2.4 i386 unistd.h */
- .long sys_getdents64
- .long sys_fcntl64
- .long sys_ni_syscall /* 250 reserved for TUX */
- .long sys_ni_syscall /* Reserved for Security */
- .long sys_gettid
- .long sys_readahead
- .long sys_setxattr
- .long sys_lsetxattr /* 255 */
- .long sys_fsetxattr
- .long sys_getxattr
- .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr /* 260 */
- .long sys_llistxattr
- .long sys_flistxattr
- .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr /* 265 */
- .long sys_tkill
- .long sys_sendfile64
- .long sys_futex
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity /* 270 */
- .long sys_ni_syscall /* reserved for set_thread_area */
- .long sys_ni_syscall /* reserved for get_thread_area */
- .long sys_io_setup
- .long sys_io_destroy
- .long sys_io_getevents /* 275 */
- .long sys_io_submit
- .long sys_io_cancel
- .long sys_fadvise64
- .long sys_ni_syscall
- .long sys_exit_group /* 280 */
- /* Rest of new 2.6 syscalls */
- .long sys_lookup_dcookie
- .long sys_epoll_create
- .long sys_epoll_ctl
- .long sys_epoll_wait
- .long sys_remap_file_pages /* 285 */
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime
- .long sys_timer_gettime
- .long sys_timer_getoverrun /* 290 */
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime
- .long sys_clock_getres
- .long sys_clock_nanosleep /* 295 */
- .long sys_statfs64
- .long sys_fstatfs64
- .long sys_tgkill
- .long sys_utimes
- .long sys_fadvise64_64 /* 300 */
- .long sys_ni_syscall /* Reserved for vserver */
- .long sys_ni_syscall /* Reserved for mbind */
- .long sys_ni_syscall /* get_mempolicy */
- .long sys_ni_syscall /* set_mempolicy */
- .long sys_mq_open /* 305 */
- .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive
- .long sys_mq_notify
- .long sys_mq_getsetattr /* 310 */
- .long sys_ni_syscall /* Reserved for kexec */
- .long sys_waitid
- .long sys_add_key
- .long sys_request_key
- .long sys_keyctl /* 315 */
- .long sys_ioprio_set
- .long sys_ioprio_get
- .long sys_inotify_init
- .long sys_inotify_add_watch
- .long sys_inotify_rm_watch /* 320 */
- .long sys_ni_syscall
- .long sys_migrate_pages
- .long sys_openat
- .long sys_mkdirat
- .long sys_mknodat /* 325 */
- .long sys_fchownat
- .long sys_futimesat
- .long sys_fstatat64
- .long sys_unlinkat
- .long sys_renameat /* 330 */
- .long sys_linkat
- .long sys_symlinkat
- .long sys_readlinkat
- .long sys_fchmodat
- .long sys_faccessat /* 335 */
- .long sys_pselect6
- .long sys_ppoll
- .long sys_unshare
- .long sys_set_robust_list
- .long sys_get_robust_list /* 340 */
- .long sys_splice
- .long sys_sync_file_range
- .long sys_tee
- .long sys_vmsplice
- .long sys_move_pages /* 345 */
- .long sys_getcpu
- .long sys_epoll_pwait
- .long sys_utimensat
- .long sys_signalfd
- .long sys_timerfd_create /* 350 */
- .long sys_eventfd
- .long sys_fallocate
- .long sys_timerfd_settime
- .long sys_timerfd_gettime
- .long sys_signalfd4 /* 355 */
- .long sys_eventfd2
- .long sys_epoll_create1
- .long sys_dup3
- .long sys_pipe2
- .long sys_inotify_init1 /* 360 */
- .long sys_preadv
- .long sys_pwritev
- .long sys_rt_tgsigqueueinfo
- .long sys_perf_event_open
- .long sys_recvmmsg /* 365 */
- .long sys_accept4
- .long sys_fanotify_init
- .long sys_fanotify_mark
- .long sys_prlimit64
- .long sys_name_to_handle_at /* 370 */
- .long sys_open_by_handle_at
- .long sys_clock_adjtime
- .long sys_syncfs
- .long sys_sendmmsg
- .long sys_setns /* 375 */
- .long sys_process_vm_readv
- .long sys_process_vm_writev
- .long sys_kcmp
- .long sys_finit_module
- .long sys_sched_getattr /* 380 */
- .long sys_sched_setattr
- .long sys_renameat2
- .long sys_seccomp
- .long sys_getrandom
- .long sys_memfd_create /* 385 */
- .long sys_bpf
- .long sys_execveat
- .long sys_userfaultfd
- .long sys_membarrier
- .long sys_mlock2 /* 390 */
- .long sys_copy_file_range
- .long sys_preadv2
- .long sys_pwritev2
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
deleted file mode 100644
index 37046f3..0000000
--- a/arch/sh/kernel/traps_64.c
+++ /dev/null
@@ -1,814 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/traps_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- */
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/kallsyms.h>
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/module.h>
-#include <linux/perf_event.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/alignment.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/fpu.h>
-
-static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode)
-{
- int get_user_error;
- unsigned long aligned_pc;
- insn_size_t opcode;
-
- if ((pc & 3) == 1) {
- /* SHmedia */
- aligned_pc = pc & ~3;
- if (from_user_mode) {
- if (!access_ok(aligned_pc, sizeof(insn_size_t))) {
- get_user_error = -EFAULT;
- } else {
- get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
- *result_opcode = opcode;
- }
- return get_user_error;
- } else {
- /* If the fault was in the kernel, we can either read
- * this directly, or if not, we fault.
- */
- *result_opcode = *(insn_size_t *)aligned_pc;
- return 0;
- }
- } else if ((pc & 1) == 0) {
- /* SHcompact */
- /* TODO : provide handling for this. We don't really support
- user-mode SHcompact yet, and for a kernel fault, this would
- have to come from a module built for SHcompact. */
- return -EFAULT;
- } else {
- /* misaligned */
- return -EFAULT;
- }
-}
-
-static int address_is_sign_extended(__u64 a)
-{
- __u64 b;
-#if (NEFF == 32)
- b = (__u64)(__s64)(__s32)(a & 0xffffffffUL);
- return (b == a) ? 1 : 0;
-#else
-#error "Sign extend check only works for NEFF==32"
-#endif
-}
-
-/* return -1 for fault, 0 for OK */
-static int generate_and_check_address(struct pt_regs *regs,
- insn_size_t opcode,
- int displacement_not_indexed,
- int width_shift,
- __u64 *address)
-{
- __u64 base_address, addr;
- int basereg;
-
- switch (1 << width_shift) {
- case 1: inc_unaligned_byte_access(); break;
- case 2: inc_unaligned_word_access(); break;
- case 4: inc_unaligned_dword_access(); break;
- case 8: inc_unaligned_multi_access(); break;
- }
-
- basereg = (opcode >> 20) & 0x3f;
- base_address = regs->regs[basereg];
- if (displacement_not_indexed) {
- __s64 displacement;
- displacement = (opcode >> 10) & 0x3ff;
- displacement = sign_extend64(displacement, 9);
- addr = (__u64)((__s64)base_address + (displacement << width_shift));
- } else {
- __u64 offset;
- int offsetreg;
- offsetreg = (opcode >> 10) & 0x3f;
- offset = regs->regs[offsetreg];
- addr = base_address + offset;
- }
-
- /* Check sign extended */
- if (!address_is_sign_extended(addr))
- return -1;
-
- /* Check accessible. For misaligned access in the kernel, assume the
- address is always accessible (and if not, just fault when the
- load/store gets done.) */
- if (user_mode(regs)) {
- inc_unaligned_user_access();
-
- if (addr >= TASK_SIZE)
- return -1;
- } else
- inc_unaligned_kernel_access();
-
- *address = addr;
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr);
- unaligned_fixups_notify(current, opcode, regs);
-
- return 0;
-}
-
-static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
-{
- unsigned short x;
- unsigned char *p, *q;
- p = (unsigned char *) (int) address;
- q = (unsigned char *) &x;
- q[0] = p[0];
- q[1] = p[1];
-
- if (do_sign_extend) {
- *result = (__u64)(__s64) *(short *) &x;
- } else {
- *result = (__u64) x;
- }
-}
-
-static void misaligned_kernel_word_store(__u64 address, __u64 value)
-{
- unsigned short x;
- unsigned char *p, *q;
- p = (unsigned char *) (int) address;
- q = (unsigned char *) &x;
-
- x = (__u16) value;
- p[0] = q[0];
- p[1] = q[1];
-}
-
-static int misaligned_load(struct pt_regs *regs,
- insn_size_t opcode,
- int displacement_not_indexed,
- int width_shift,
- int do_sign_extend)
-{
- /* Return -1 for a fault, 0 for OK */
- int error;
- int destreg;
- __u64 address;
-
- error = generate_and_check_address(regs, opcode,
- displacement_not_indexed, width_shift, &address);
- if (error < 0)
- return error;
-
- destreg = (opcode >> 4) & 0x3f;
- if (user_mode(regs)) {
- __u64 buffer;
-
- if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
- return -1;
- }
-
- if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
- return -1; /* fault */
- }
- switch (width_shift) {
- case 1:
- if (do_sign_extend) {
- regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer;
- } else {
- regs->regs[destreg] = (__u64) *(__u16 *) &buffer;
- }
- break;
- case 2:
- regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer;
- break;
- case 3:
- regs->regs[destreg] = buffer;
- break;
- default:
- printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
- } else {
- /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
- __u64 lo, hi;
-
- switch (width_shift) {
- case 1:
- misaligned_kernel_word_load(address, do_sign_extend, ®s->regs[destreg]);
- break;
- case 2:
- asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address));
- asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address));
- regs->regs[destreg] = lo | hi;
- break;
- case 3:
- asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address));
- asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address));
- regs->regs[destreg] = lo | hi;
- break;
-
- default:
- printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
- }
-
- return 0;
-}
-
-static int misaligned_store(struct pt_regs *regs,
- insn_size_t opcode,
- int displacement_not_indexed,
- int width_shift)
-{
- /* Return -1 for a fault, 0 for OK */
- int error;
- int srcreg;
- __u64 address;
-
- error = generate_and_check_address(regs, opcode,
- displacement_not_indexed, width_shift, &address);
- if (error < 0)
- return error;
-
- srcreg = (opcode >> 4) & 0x3f;
- if (user_mode(regs)) {
- __u64 buffer;
-
- if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
- return -1;
- }
-
- switch (width_shift) {
- case 1:
- *(__u16 *) &buffer = (__u16) regs->regs[srcreg];
- break;
- case 2:
- *(__u32 *) &buffer = (__u32) regs->regs[srcreg];
- break;
- case 3:
- buffer = regs->regs[srcreg];
- break;
- default:
- printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
-
- if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
- return -1; /* fault */
- }
- } else {
- /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
- __u64 val = regs->regs[srcreg];
-
- switch (width_shift) {
- case 1:
- misaligned_kernel_word_store(address, val);
- break;
- case 2:
- asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address));
- asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address));
- break;
- case 3:
- asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address));
- asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address));
- break;
-
- default:
- printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
- }
-
- return 0;
-}
-
-/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
- error. */
-static int misaligned_fpu_load(struct pt_regs *regs,
- insn_size_t opcode,
- int displacement_not_indexed,
- int width_shift,
- int do_paired_load)
-{
- /* Return -1 for a fault, 0 for OK */
- int error;
- int destreg;
- __u64 address;
-
- error = generate_and_check_address(regs, opcode,
- displacement_not_indexed, width_shift, &address);
- if (error < 0)
- return error;
-
- destreg = (opcode >> 4) & 0x3f;
- if (user_mode(regs)) {
- __u64 buffer;
- __u32 buflo, bufhi;
-
- if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
- return -1;
- }
-
- if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
- return -1; /* fault */
- }
- /* 'current' may be the current owner of the FPU state, so
- context switch the registers into memory so they can be
- indexed by register number. */
- if (last_task_used_math == current) {
- enable_fpu();
- save_fpu(current);
- disable_fpu();
- last_task_used_math = NULL;
- regs->sr |= SR_FD;
- }
-
- buflo = *(__u32*) &buffer;
- bufhi = *(1 + (__u32*) &buffer);
-
- switch (width_shift) {
- case 2:
- current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
- break;
- case 3:
- if (do_paired_load) {
- current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
- current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
- } else {
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
- current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi;
- current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo;
-#else
- current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
- current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
-#endif
- }
- break;
- default:
- printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
- return 0;
- } else {
- die ("Misaligned FPU load inside kernel", regs, 0);
- return -1;
- }
-}
-
-static int misaligned_fpu_store(struct pt_regs *regs,
- insn_size_t opcode,
- int displacement_not_indexed,
- int width_shift,
- int do_paired_load)
-{
- /* Return -1 for a fault, 0 for OK */
- int error;
- int srcreg;
- __u64 address;
-
- error = generate_and_check_address(regs, opcode,
- displacement_not_indexed, width_shift, &address);
- if (error < 0)
- return error;
-
- srcreg = (opcode >> 4) & 0x3f;
- if (user_mode(regs)) {
- __u64 buffer;
- /* Initialise these to NaNs. */
- __u32 buflo=0xffffffffUL, bufhi=0xffffffffUL;
-
- if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
- return -1;
- }
-
- /* 'current' may be the current owner of the FPU state, so
- context switch the registers into memory so they can be
- indexed by register number. */
- if (last_task_used_math == current) {
- enable_fpu();
- save_fpu(current);
- disable_fpu();
- last_task_used_math = NULL;
- regs->sr |= SR_FD;
- }
-
- switch (width_shift) {
- case 2:
- buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
- break;
- case 3:
- if (do_paired_load) {
- buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
- bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
- } else {
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
- bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg];
- buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
-#else
- buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
- bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
-#endif
- }
- break;
- default:
- printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n",
- width_shift, (unsigned long) regs->pc);
- break;
- }
-
- *(__u32*) &buffer = buflo;
- *(1 + (__u32*) &buffer) = bufhi;
- if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
- return -1; /* fault */
- }
- return 0;
- } else {
- die ("Misaligned FPU load inside kernel", regs, 0);
- return -1;
- }
-}
-
-static int misaligned_fixup(struct pt_regs *regs)
-{
- insn_size_t opcode;
- int error;
- int major, minor;
- unsigned int user_action;
-
- user_action = unaligned_user_action();
- if (!(user_action & UM_FIXUP))
- return -1;
-
- error = read_opcode(regs->pc, &opcode, user_mode(regs));
- if (error < 0) {
- return error;
- }
- major = (opcode >> 26) & 0x3f;
- minor = (opcode >> 16) & 0xf;
-
- switch (major) {
- case (0x84>>2): /* LD.W */
- error = misaligned_load(regs, opcode, 1, 1, 1);
- break;
- case (0xb0>>2): /* LD.UW */
- error = misaligned_load(regs, opcode, 1, 1, 0);
- break;
- case (0x88>>2): /* LD.L */
- error = misaligned_load(regs, opcode, 1, 2, 1);
- break;
- case (0x8c>>2): /* LD.Q */
- error = misaligned_load(regs, opcode, 1, 3, 0);
- break;
-
- case (0xa4>>2): /* ST.W */
- error = misaligned_store(regs, opcode, 1, 1);
- break;
- case (0xa8>>2): /* ST.L */
- error = misaligned_store(regs, opcode, 1, 2);
- break;
- case (0xac>>2): /* ST.Q */
- error = misaligned_store(regs, opcode, 1, 3);
- break;
-
- case (0x40>>2): /* indexed loads */
- switch (minor) {
- case 0x1: /* LDX.W */
- error = misaligned_load(regs, opcode, 0, 1, 1);
- break;
- case 0x5: /* LDX.UW */
- error = misaligned_load(regs, opcode, 0, 1, 0);
- break;
- case 0x2: /* LDX.L */
- error = misaligned_load(regs, opcode, 0, 2, 1);
- break;
- case 0x3: /* LDX.Q */
- error = misaligned_load(regs, opcode, 0, 3, 0);
- break;
- default:
- error = -1;
- break;
- }
- break;
-
- case (0x60>>2): /* indexed stores */
- switch (minor) {
- case 0x1: /* STX.W */
- error = misaligned_store(regs, opcode, 0, 1);
- break;
- case 0x2: /* STX.L */
- error = misaligned_store(regs, opcode, 0, 2);
- break;
- case 0x3: /* STX.Q */
- error = misaligned_store(regs, opcode, 0, 3);
- break;
- default:
- error = -1;
- break;
- }
- break;
-
- case (0x94>>2): /* FLD.S */
- error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
- break;
- case (0x98>>2): /* FLD.P */
- error = misaligned_fpu_load(regs, opcode, 1, 3, 1);
- break;
- case (0x9c>>2): /* FLD.D */
- error = misaligned_fpu_load(regs, opcode, 1, 3, 0);
- break;
- case (0x1c>>2): /* floating indexed loads */
- switch (minor) {
- case 0x8: /* FLDX.S */
- error = misaligned_fpu_load(regs, opcode, 0, 2, 0);
- break;
- case 0xd: /* FLDX.P */
- error = misaligned_fpu_load(regs, opcode, 0, 3, 1);
- break;
- case 0x9: /* FLDX.D */
- error = misaligned_fpu_load(regs, opcode, 0, 3, 0);
- break;
- default:
- error = -1;
- break;
- }
- break;
- case (0xb4>>2): /* FLD.S */
- error = misaligned_fpu_store(regs, opcode, 1, 2, 0);
- break;
- case (0xb8>>2): /* FLD.P */
- error = misaligned_fpu_store(regs, opcode, 1, 3, 1);
- break;
- case (0xbc>>2): /* FLD.D */
- error = misaligned_fpu_store(regs, opcode, 1, 3, 0);
- break;
- case (0x3c>>2): /* floating indexed stores */
- switch (minor) {
- case 0x8: /* FSTX.S */
- error = misaligned_fpu_store(regs, opcode, 0, 2, 0);
- break;
- case 0xd: /* FSTX.P */
- error = misaligned_fpu_store(regs, opcode, 0, 3, 1);
- break;
- case 0x9: /* FSTX.D */
- error = misaligned_fpu_store(regs, opcode, 0, 3, 0);
- break;
- default:
- error = -1;
- break;
- }
- break;
-
- default:
- /* Fault */
- error = -1;
- break;
- }
-
- if (error < 0) {
- return error;
- } else {
- regs->pc += 4; /* Skip the instruction that's just been emulated */
- return 0;
- }
-}
-
-static void do_unhandled_exception(int signr, char *str, unsigned long error,
- struct pt_regs *regs)
-{
- if (user_mode(regs))
- force_sig(signr);
-
- die_if_no_fixup(str, regs, error);
-}
-
-#define DO_ERROR(signr, str, name) \
-asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
-{ \
- do_unhandled_exception(signr, str, error_code, regs); \
-}
-
-DO_ERROR(SIGILL, "illegal slot instruction", illegal_slot_inst)
-DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec)
-
-#if defined(CONFIG_SH64_ID2815_WORKAROUND)
-
-#define OPCODE_INVALID 0
-#define OPCODE_USER_VALID 1
-#define OPCODE_PRIV_VALID 2
-
-/* getcon/putcon - requires checking which control register is referenced. */
-#define OPCODE_CTRL_REG 3
-
-/* Table of valid opcodes for SHmedia mode.
- Form a 10-bit value by concatenating the major/minor opcodes i.e.
- opcode[31:26,20:16]. The 6 MSBs of this value index into the following
- array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
- LSBs==4'b0000 etc). */
-static unsigned long shmedia_opcode_table[64] = {
- 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
- 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
- 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
- 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
-};
-
-/* Workaround SH5-101 cut2 silicon defect #2815 :
- in some situations, inter-mode branches from SHcompact -> SHmedia
- which should take ITLBMISS or EXECPROT exceptions at the target
- falsely take RESINST at the target instead. */
-void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
-{
- insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
- unsigned long pc, aligned_pc;
- unsigned long index, shift;
- unsigned long major, minor, combined;
- unsigned long reserved_field;
- int opcode_state;
- int get_user_error;
- int signr = SIGILL;
- char *exception_name = "reserved_instruction";
-
- pc = regs->pc;
-
- /* SHcompact is not handled */
- if (unlikely((pc & 3) == 0))
- goto out;
-
- /* SHmedia : check for defect. This requires executable vmas
- to be readable too. */
- aligned_pc = pc & ~3;
- if (!access_ok(aligned_pc, sizeof(insn_size_t)))
- get_user_error = -EFAULT;
- else
- get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
-
- if (get_user_error < 0) {
- /*
- * Error trying to read opcode. This typically means a
- * real fault, not a RESINST any more. So change the
- * codes.
- */
- exception_name = "address error (exec)";
- signr = SIGSEGV;
- goto out;
- }
-
- /* These bits are currently reserved as zero in all valid opcodes */
- reserved_field = opcode & 0xf;
- if (unlikely(reserved_field))
- goto out; /* invalid opcode */
-
- major = (opcode >> 26) & 0x3f;
- minor = (opcode >> 16) & 0xf;
- combined = (major << 4) | minor;
- index = major;
- shift = minor << 1;
- opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
- switch (opcode_state) {
- case OPCODE_INVALID:
- /* Trap. */
- break;
- case OPCODE_USER_VALID:
- /*
- * Restart the instruction: the branch to the instruction
- * will now be from an RTE not from SHcompact so the
- * silicon defect won't be triggered.
- */
- return;
- case OPCODE_PRIV_VALID:
- if (!user_mode(regs)) {
- /*
- * Should only ever get here if a module has
- * SHcompact code inside it. If so, the same fix
- * up is needed.
- */
- return; /* same reason */
- }
-
- /*
- * Otherwise, user mode trying to execute a privileged
- * instruction - fall through to trap.
- */
- break;
- case OPCODE_CTRL_REG:
- /* If in privileged mode, return as above. */
- if (!user_mode(regs))
- return;
-
- /* In user mode ... */
- if (combined == 0x9f) { /* GETCON */
- unsigned long regno = (opcode >> 20) & 0x3f;
-
- if (regno >= 62)
- return;
-
- /* reserved/privileged control register => trap */
- } else if (combined == 0x1bf) { /* PUTCON */
- unsigned long regno = (opcode >> 4) & 0x3f;
-
- if (regno >= 62)
- return;
-
- /* reserved/privileged control register => trap */
- }
-
- break;
- default:
- /* Fall through to trap. */
- break;
- }
-
-out:
- do_unhandled_exception(signr, exception_name, error_code, regs);
-}
-
-#else /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* If the workaround isn't needed, this is just a straightforward reserved
- instruction */
-DO_ERROR(SIGILL, "reserved instruction", reserved_inst)
-
-#endif /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* Called with interrupts disabled */
-asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
-{
- die_if_kernel("exception", regs, ex);
-}
-
-asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
-{
- /* Syscall debug */
- printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId);
-
- die_if_kernel("unknown trapa", regs, scId);
-
- return -ENOSYS;
-}
-
-/* Implement misaligned load/store handling for kernel (and optionally for user
- mode too). Limitation : only SHmedia mode code is handled - there is no
- handling at all for misaligned accesses occurring in SHcompact code yet. */
-
-asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
-{
- if (misaligned_fixup(regs) < 0)
- do_unhandled_exception(SIGSEGV, "address error(load)",
- error_code, regs);
-}
-
-asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
-{
- if (misaligned_fixup(regs) < 0)
- do_unhandled_exception(SIGSEGV, "address error(store)",
- error_code, regs);
-}
-
-asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
-{
- u64 peek_real_address_q(u64 addr);
- u64 poke_real_address_q(u64 addr, u64 val);
- unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010;
- unsigned long long exp_cause;
- /* It's not worth ioremapping the debug module registers for the amount
- of access we make to them - just go direct to their physical
- addresses. */
- exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY);
- if (exp_cause & ~4)
- printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n",
- (unsigned long)(exp_cause & 0xffffffff));
- show_state();
- /* Clear all DEBUGINT causes */
- poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
-}
-
-void per_cpu_trap_init(void)
-{
- /* Nothing to do for now, VBR initialization later. */
-}
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index c60b199..bde7a6c0 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -3,14 +3,7 @@
* ld script to make SuperH Linux kernel
* Written by Niibe Yutaka and Paul Mundt
*/
-#ifdef CONFIG_SUPERH64
-#define LOAD_OFFSET PAGE_OFFSET
-OUTPUT_ARCH(sh:sh5)
-#else
-#define LOAD_OFFSET 0
OUTPUT_ARCH(sh)
-#endif
-
#include <asm/thread_info.h>
#include <asm/cache.h>
#include <asm/vmlinux.lds.h>
@@ -28,14 +21,13 @@
_text = .; /* Text and read-only data */
- .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) {
+ .empty_zero_page : AT(ADDR(.empty_zero_page)) {
*(.empty_zero_page)
} = 0
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ .text : AT(ADDR(.text)) {
HEAD_TEXT
TEXT_TEXT
- EXTRA_TEXT
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
@@ -62,7 +54,7 @@
INIT_DATA_SECTION(16)
. = ALIGN(4);
- .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
+ .machvec.init : AT(ADDR(.machvec.init)) {
__machvec_start = .;
*(.machvec.init)
__machvec_end = .;
@@ -74,8 +66,8 @@
* .exit.text is discarded at runtime, not link time, to deal with
* references from __bug_table
*/
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
+ .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
+ .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
. = ALIGN(PAGE_SIZE);
__init_end = .;
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index dad8e6a..540e670 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -29,6 +29,7 @@
: "0" (loops)
: "t");
}
+EXPORT_SYMBOL(__delay);
inline void __const_udelay(unsigned long xloops)
{
diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
deleted file mode 100644
index 69779ff..0000000
--- a/arch/sh/lib64/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the SH-5 specific library files..
-#
-# Copyright (C) 2000, 2001 Paolo Alberelli
-# Copyright (C) 2003 - 2008 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-# Panic should really be compiled as PIC
-lib-y := udelay.o panic.o memcpy.o memset.o \
- copy_user_memcpy.o copy_page.o strcpy.o strlen.o
-
-# Extracted from libgcc
-lib-y += udivsi3.o udivdi3.o sdivsi3.o
diff --git a/arch/sh/lib64/copy_page.S b/arch/sh/lib64/copy_page.S
deleted file mode 100644
index 0ec6fca..0000000
--- a/arch/sh/lib64/copy_page.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
-
- This file is subject to the terms and conditions of the GNU General Public
- License. See the file "COPYING" in the main directory of this archive
- for more details.
-
- Tight version of mempy for the case of just copying a page.
- Prefetch strategy empirically optimised against RTL simulations
- of SH5-101 cut2 eval chip with Cayman board DDR memory.
-
- Parameters:
- r2 : destination effective address (start of page)
- r3 : source effective address (start of page)
-
- Always copies 4096 bytes.
-
- Points to review.
- * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead.
- It seems like the prefetch needs to be at at least 4 lines ahead to get
- the data into the cache in time, and the allocos contend with outstanding
- prefetches for the same cache set, so it's better to have the numbers
- different.
- */
-
- .section .text..SHmedia32,"ax"
- .little
-
- .balign 8
- .global copy_page
-copy_page:
-
- /* Copy 4096 bytes worth of data from r3 to r2.
- Do prefetches 4 lines ahead.
- Do alloco 2 lines ahead */
-
- pta 1f, tr1
- pta 2f, tr2
- pta 3f, tr3
- ptabs r18, tr0
-
-#if 0
- /* TAKum03020 */
- ld.q r3, 0x00, r63
- ld.q r3, 0x20, r63
- ld.q r3, 0x40, r63
- ld.q r3, 0x60, r63
-#endif
- alloco r2, 0x00
- synco ! TAKum03020
- alloco r2, 0x20
- synco ! TAKum03020
-
- movi 3968, r6
- add r2, r6, r6
- addi r6, 64, r7
- addi r7, 64, r8
- sub r3, r2, r60
- addi r60, 8, r61
- addi r61, 8, r62
- addi r62, 8, r23
- addi r60, 0x80, r22
-
-/* Minimal code size. The extra branches inside the loop don't cost much
- because they overlap with the time spent waiting for prefetches to
- complete. */
-1:
-#if 0
- /* TAKum03020 */
- bge/u r2, r6, tr2 ! skip prefetch for last 4 lines
- ldx.q r2, r22, r63 ! prefetch 4 lines hence
-#endif
-2:
- bge/u r2, r7, tr3 ! skip alloco for last 2 lines
- alloco r2, 0x40 ! alloc destination line 2 lines ahead
- synco ! TAKum03020
-3:
- ldx.q r2, r60, r36
- ldx.q r2, r61, r37
- ldx.q r2, r62, r38
- ldx.q r2, r23, r39
- st.q r2, 0, r36
- st.q r2, 8, r37
- st.q r2, 16, r38
- st.q r2, 24, r39
- addi r2, 32, r2
- bgt/l r8, r2, tr1
-
- blink tr0, r63 ! return
diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S
deleted file mode 100644
index 515f81b..0000000
--- a/arch/sh/lib64/copy_user_memcpy.S
+++ /dev/null
@@ -1,218 +0,0 @@
-! SPDX-License-Identifier: GPL-2.0
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-! ARG1: source pointer
-! ARG2: byte count
-!
-! Exit: RESULT: destination pointer
-! any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-! unfortunately it is difficult in some cases to concatanate bytes
-! into a longword on the SH, so this does a longword read and small
-! writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-! copied is unsigned greater than the address of the first byte to
-! be copied. This could be easily swapped for a signed comparison,
-! but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-! bytes memory chunk to b copied, the rest of the word can be read
-! without side effects.
-! This could be easily changed by increasing the minimum size of
-! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-! however, this would cost a few extra cyles on average.
-! For SHmedia, the assumption is that any quadword can be read in its
-! enirety if at least one byte is included in the copy.
-
-/* Imported into Linux kernel by Richard Curnow. This is used to implement the
- __copy_user function in the general case, so it has to be a distinct
- function from intra-kernel memcpy to allow for exception fix-ups in the
- event that the user pointer is bad somewhere in the copy (e.g. due to
- running off the end of the vma).
-
- Note, this algorithm will be slightly wasteful in the case where the source
- and destination pointers are equally aligned, because the stlo/sthi pairs
- could then be merged back into single stores. If there are a lot of cache
- misses, this is probably offset by the stall lengths on the preloads.
-
-*/
-
-/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020
- * erratum. The first two prefetches are nop-ed out to avoid upsetting the
- * instruction counts used in the jump address calculation.
- * */
-
- .section .text..SHmedia32,"ax"
- .little
- .balign 32
- .global copy_user_memcpy
- .global copy_user_memcpy_end
-copy_user_memcpy:
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
- nop ! ld.b r3,0,r63 ! TAKum03020
- pta/l Large,tr0
- movi 25,r0
- bgeu/u r4,r0,tr0
- nsb r4,r0
- shlli r0,5,r0
- movi (L1-L0+63*32 + 1) & 0xffff,r1
- sub r1, r0, r0
-L0: ptrel r0,tr0
- add r2,r4,r5
- ptabs r18,tr1
- add r3,r4,r6
- blink tr0,r63
-
-/* Rearranged to make cut2 safe */
- .balign 8
-L4_7: /* 4..7 byte memcpy cntd. */
- stlo.l r2, 0, r0
- or r6, r7, r6
- sthi.l r5, -1, r6
- stlo.l r5, -4, r6
- blink tr1,r63
-
- .balign 8
-L1: /* 0 byte memcpy */
- nop
- blink tr1,r63
- nop
- nop
- nop
- nop
-
-L2_3: /* 2 or 3 byte memcpy cntd. */
- st.b r5,-1,r6
- blink tr1,r63
-
- /* 1 byte memcpy */
- ld.b r3,0,r0
- st.b r2,0,r0
- blink tr1,r63
-
-L8_15: /* 8..15 byte memcpy cntd. */
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
- /* 2 or 3 byte memcpy */
- ld.b r3,0,r0
- nop ! ld.b r2,0,r63 ! TAKum03020
- ld.b r3,1,r1
- st.b r2,0,r0
- pta/l L2_3,tr0
- ld.b r6,-1,r6
- st.b r2,1,r1
- blink tr0, r63
-
- /* 4 .. 7 byte memcpy */
- LDUAL (r3, 0, r0, r1)
- pta L4_7, tr0
- ldlo.l r6, -4, r7
- or r0, r1, r0
- sthi.l r2, 3, r0
- ldhi.l r6, -1, r6
- blink tr0, r63
-
- /* 8 .. 15 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- pta L8_15, tr0
- ldlo.q r6, -8, r7
- or r0, r1, r0
- sthi.q r2, 7, r0
- ldhi.q r6, -1, r6
- blink tr0, r63
-
- /* 16 .. 24 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- LDUAQ (r3, 8, r8, r9)
- or r0, r1, r0
- sthi.q r2, 7, r0
- or r8, r9, r8
- sthi.q r2, 15, r8
- ldlo.q r6, -8, r7
- ldhi.q r6, -1, r6
- stlo.q r2, 8, r8
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
-Large:
- ! ld.b r2, 0, r63 ! TAKum03020
- pta/l Loop_ua, tr1
- ori r3, -8, r7
- sub r2, r7, r22
- sub r3, r2, r6
- add r2, r4, r5
- ldlo.q r3, 0, r0
- addi r5, -16, r5
- movi 64+8, r27 ! could subtract r7 from that.
- stlo.q r2, 0, r0
- sthi.q r2, 7, r0
- ldx.q r22, r6, r0
- bgtu/l r27, r4, tr1
-
- addi r5, -48, r27
- pta/l Loop_line, tr0
- addi r6, 64, r36
- addi r6, -24, r19
- addi r6, -16, r20
- addi r6, -8, r21
-
-Loop_line:
- ! ldx.q r22, r36, r63 ! TAKum03020
- alloco r22, 32
- synco
- addi r22, 32, r22
- ldx.q r22, r19, r23
- sthi.q r22, -25, r0
- ldx.q r22, r20, r24
- ldx.q r22, r21, r25
- stlo.q r22, -32, r0
- ldx.q r22, r6, r0
- sthi.q r22, -17, r23
- sthi.q r22, -9, r24
- sthi.q r22, -1, r25
- stlo.q r22, -24, r23
- stlo.q r22, -16, r24
- stlo.q r22, -8, r25
- bgeu r27, r22, tr0
-
-Loop_ua:
- addi r22, 8, r22
- sthi.q r22, -1, r0
- stlo.q r22, -8, r0
- ldx.q r22, r6, r0
- bgtu/l r5, r22, tr1
-
- add r3, r4, r7
- ldlo.q r7, -8, r1
- sthi.q r22, 7, r0
- ldhi.q r7, -1, r7
- ptabs r18,tr1
- stlo.q r22, 0, r0
- or r1, r7, r1
- sthi.q r5, 15, r1
- stlo.q r5, 8, r1
- blink tr1, r63
-copy_user_memcpy_end:
- nop
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
deleted file mode 100644
index 231ea59..0000000
--- a/arch/sh/lib64/memcpy.S
+++ /dev/null
@@ -1,202 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-! ARG1: source pointer
-! ARG2: byte count
-!
-! Exit: RESULT: destination pointer
-! any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-! unfortunately it is difficult in some cases to concatanate bytes
-! into a longword on the SH, so this does a longword read and small
-! writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-! copied is unsigned greater than the address of the first byte to
-! be copied. This could be easily swapped for a signed comparison,
-! but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-! bytes memory chunk to b copied, the rest of the word can be read
-! without side effects.
-! This could be easily changed by increasing the minimum size of
-! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-! however, this would cost a few extra cyles on average.
-! For SHmedia, the assumption is that any quadword can be read in its
-! enirety if at least one byte is included in the copy.
-!
-
- .section .text..SHmedia32,"ax"
- .globl memcpy
- .type memcpy, @function
- .align 5
-
-memcpy:
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
- ld.b r3,0,r63
- pta/l Large,tr0
- movi 25,r0
- bgeu/u r4,r0,tr0
- nsb r4,r0
- shlli r0,5,r0
- movi (L1-L0+63*32 + 1) & 0xffff,r1
- sub r1, r0, r0
-L0: ptrel r0,tr0
- add r2,r4,r5
- ptabs r18,tr1
- add r3,r4,r6
- blink tr0,r63
-
-/* Rearranged to make cut2 safe */
- .balign 8
-L4_7: /* 4..7 byte memcpy cntd. */
- stlo.l r2, 0, r0
- or r6, r7, r6
- sthi.l r5, -1, r6
- stlo.l r5, -4, r6
- blink tr1,r63
-
- .balign 8
-L1: /* 0 byte memcpy */
- nop
- blink tr1,r63
- nop
- nop
- nop
- nop
-
-L2_3: /* 2 or 3 byte memcpy cntd. */
- st.b r5,-1,r6
- blink tr1,r63
-
- /* 1 byte memcpy */
- ld.b r3,0,r0
- st.b r2,0,r0
- blink tr1,r63
-
-L8_15: /* 8..15 byte memcpy cntd. */
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
- /* 2 or 3 byte memcpy */
- ld.b r3,0,r0
- ld.b r2,0,r63
- ld.b r3,1,r1
- st.b r2,0,r0
- pta/l L2_3,tr0
- ld.b r6,-1,r6
- st.b r2,1,r1
- blink tr0, r63
-
- /* 4 .. 7 byte memcpy */
- LDUAL (r3, 0, r0, r1)
- pta L4_7, tr0
- ldlo.l r6, -4, r7
- or r0, r1, r0
- sthi.l r2, 3, r0
- ldhi.l r6, -1, r6
- blink tr0, r63
-
- /* 8 .. 15 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- pta L8_15, tr0
- ldlo.q r6, -8, r7
- or r0, r1, r0
- sthi.q r2, 7, r0
- ldhi.q r6, -1, r6
- blink tr0, r63
-
- /* 16 .. 24 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- LDUAQ (r3, 8, r8, r9)
- or r0, r1, r0
- sthi.q r2, 7, r0
- or r8, r9, r8
- sthi.q r2, 15, r8
- ldlo.q r6, -8, r7
- ldhi.q r6, -1, r6
- stlo.q r2, 8, r8
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
-Large:
- ld.b r2, 0, r63
- pta/l Loop_ua, tr1
- ori r3, -8, r7
- sub r2, r7, r22
- sub r3, r2, r6
- add r2, r4, r5
- ldlo.q r3, 0, r0
- addi r5, -16, r5
- movi 64+8, r27 // could subtract r7 from that.
- stlo.q r2, 0, r0
- sthi.q r2, 7, r0
- ldx.q r22, r6, r0
- bgtu/l r27, r4, tr1
-
- addi r5, -48, r27
- pta/l Loop_line, tr0
- addi r6, 64, r36
- addi r6, -24, r19
- addi r6, -16, r20
- addi r6, -8, r21
-
-Loop_line:
- ldx.q r22, r36, r63
- alloco r22, 32
- addi r22, 32, r22
- ldx.q r22, r19, r23
- sthi.q r22, -25, r0
- ldx.q r22, r20, r24
- ldx.q r22, r21, r25
- stlo.q r22, -32, r0
- ldx.q r22, r6, r0
- sthi.q r22, -17, r23
- sthi.q r22, -9, r24
- sthi.q r22, -1, r25
- stlo.q r22, -24, r23
- stlo.q r22, -16, r24
- stlo.q r22, -8, r25
- bgeu r27, r22, tr0
-
-Loop_ua:
- addi r22, 8, r22
- sthi.q r22, -1, r0
- stlo.q r22, -8, r0
- ldx.q r22, r6, r0
- bgtu/l r5, r22, tr1
-
- add r3, r4, r7
- ldlo.q r7, -8, r1
- sthi.q r22, 7, r0
- ldhi.q r7, -1, r7
- ptabs r18,tr1
- stlo.q r22, 0, r0
- or r1, r7, r1
- sthi.q r5, 15, r1
- stlo.q r5, 8, r1
- blink tr1, r63
-
- .size memcpy,.-memcpy
diff --git a/arch/sh/lib64/memset.S b/arch/sh/lib64/memset.S
deleted file mode 100644
index 453aa5f..0000000
--- a/arch/sh/lib64/memset.S
+++ /dev/null
@@ -1,92 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-!
-! Fast SH memset
-!
-! by Toshiyasu Morita (tm@netcom.com)
-!
-! SH5 code by J"orn Rennecke (joern.rennecke@superh.com)
-! Copyright 2002 SuperH Ltd.
-!
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define SHHI shlld
-#define SHLO shlrd
-#else
-#define SHHI shlrd
-#define SHLO shlld
-#endif
-
- .section .text..SHmedia32,"ax"
- .globl memset
- .type memset, @function
-
- .align 5
-
-memset:
- pta/l multiquad, tr0
- andi r2, 7, r22
- ptabs r18, tr2
- mshflo.b r3,r3,r3
- add r4, r22, r23
- mperm.w r3, r63, r3 // Fill pattern now in every byte of r3
-
- movi 8, r9
- bgtu/u r23, r9, tr0 // multiquad
-
- beqi/u r4, 0, tr2 // Return with size 0 - ensures no mem accesses
- ldlo.q r2, 0, r7
- shlli r4, 2, r4
- movi -1, r8
- SHHI r8, r4, r8
- SHHI r8, r4, r8
- mcmv r7, r8, r3
- stlo.q r2, 0, r3
- blink tr2, r63
-
-multiquad:
- pta/l lastquad, tr0
- stlo.q r2, 0, r3
- shlri r23, 3, r24
- add r2, r4, r5
- beqi/u r24, 1, tr0 // lastquad
- pta/l loop, tr1
- sub r2, r22, r25
- andi r5, -8, r20 // calculate end address and
- addi r20, -7*8, r8 // loop end address; This might overflow, so we need
- // to use a different test before we start the loop
- bge/u r24, r9, tr1 // loop
- st.q r25, 8, r3
- st.q r20, -8, r3
- shlri r24, 1, r24
- beqi/u r24, 1, tr0 // lastquad
- st.q r25, 16, r3
- st.q r20, -16, r3
- beqi/u r24, 2, tr0 // lastquad
- st.q r25, 24, r3
- st.q r20, -24, r3
-lastquad:
- sthi.q r5, -1, r3
- blink tr2,r63
-
-loop:
-!!! alloco r25, 32 // QQQ comment out for short-term fix to SHUK #3895.
- // QQQ commenting out is locically correct, but sub-optimal
- // QQQ Sean McGoogan - 4th April 2003.
- st.q r25, 8, r3
- st.q r25, 16, r3
- st.q r25, 24, r3
- st.q r25, 32, r3
- addi r25, 32, r25
- bgeu/l r8, r25, tr1 // loop
-
- st.q r20, -40, r3
- st.q r20, -32, r3
- st.q r20, -24, r3
- st.q r20, -16, r3
- st.q r20, -8, r3
- sthi.q r5, -1, r3
- blink tr2,r63
-
- .size memset,.-memset
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
deleted file mode 100644
index 38c954e..0000000
--- a/arch/sh/lib64/panic.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2003 Richard Curnow, SuperH UK Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-void
-panic_handler(unsigned long panicPC, unsigned long panicSSR,
- unsigned long panicEXPEVT)
-{
- /* Never return from the panic handler */
- for (;;) ;
-}
diff --git a/arch/sh/lib64/sdivsi3.S b/arch/sh/lib64/sdivsi3.S
deleted file mode 100644
index b422e23..0000000
--- a/arch/sh/lib64/sdivsi3.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .global __sdivsi3
- .global __sdivsi3_1
- .global __sdivsi3_2
- .section .text..SHmedia32,"ax"
- .align 2
-
- /* inputs: r4,r5 */
- /* clobbered: r1,r18,r19,r20,r21,r25,tr0 */
- /* result in r0 */
-__sdivsi3:
-__sdivsi3_1:
- ptb __div_table,tr0
- gettr tr0,r20
-
-__sdivsi3_2:
- nsb r5, r1
- shlld r5, r1, r25 /* normalize; [-2 ..1, 1..2) in s2.62 */
- shari r25, 58, r21 /* extract 5(6) bit index (s2.4 with hole -1..1) */
- /* bubble */
- ldx.ub r20, r21, r19 /* u0.8 */
- shari r25, 32, r25 /* normalize to s2.30 */
- shlli r21, 1, r21
- muls.l r25, r19, r19 /* s2.38 */
- ldx.w r20, r21, r21 /* s2.14 */
- ptabs r18, tr0
- shari r19, 24, r19 /* truncate to s2.14 */
- sub r21, r19, r19 /* some 11 bit inverse in s1.14 */
- muls.l r19, r19, r21 /* u0.28 */
- sub r63, r1, r1
- addi r1, 92, r1
- muls.l r25, r21, r18 /* s2.58 */
- shlli r19, 45, r19 /* multiply by two and convert to s2.58 */
- /* bubble */
- sub r19, r18, r18
- shari r18, 28, r18 /* some 22 bit inverse in s1.30 */
- muls.l r18, r25, r0 /* s2.60 */
- muls.l r18, r4, r25 /* s32.30 */
- /* bubble */
- shari r0, 16, r19 /* s-16.44 */
- muls.l r19, r18, r19 /* s-16.74 */
- shari r25, 63, r0
- shari r4, 14, r18 /* s19.-14 */
- shari r19, 30, r19 /* s-16.44 */
- muls.l r19, r18, r19 /* s15.30 */
- xor r21, r0, r21 /* You could also use the constant 1 << 27. */
- add r21, r25, r21
- sub r21, r19, r21
- shard r21, r1, r21
- sub r21, r0, r0
- blink tr0, r63
-
-/* This table has been generated by divtab.c .
-Defects for bias -330:
- Max defect: 6.081536e-07 at -1.000000e+00
- Min defect: 2.849516e-08 at 1.030651e+00
- Max 2nd step defect: 9.606539e-12 at -1.000000e+00
- Min 2nd step defect: 0.000000e+00 at 0.000000e+00
- Defect at 1: 1.238659e-07
- Defect at -2: 1.061708e-07 */
-
- .balign 2
- .type __div_table,@object
- .size __div_table,128
-/* negative division constants */
- .word -16638
- .word -17135
- .word -17737
- .word -18433
- .word -19103
- .word -19751
- .word -20583
- .word -21383
- .word -22343
- .word -23353
- .word -24407
- .word -25582
- .word -26863
- .word -28382
- .word -29965
- .word -31800
-/* negative division factors */
- .byte 66
- .byte 70
- .byte 75
- .byte 81
- .byte 87
- .byte 93
- .byte 101
- .byte 109
- .byte 119
- .byte 130
- .byte 142
- .byte 156
- .byte 172
- .byte 192
- .byte 214
- .byte 241
- .skip 16
- .global __div_table
-__div_table:
- .skip 16
-/* positive division factors */
- .byte 241
- .byte 214
- .byte 192
- .byte 172
- .byte 156
- .byte 142
- .byte 130
- .byte 119
- .byte 109
- .byte 101
- .byte 93
- .byte 87
- .byte 81
- .byte 75
- .byte 70
- .byte 66
-/* positive division constants */
- .word 31801
- .word 29966
- .word 28383
- .word 26864
- .word 25583
- .word 24408
- .word 23354
- .word 22344
- .word 21384
- .word 20584
- .word 19752
- .word 19104
- .word 18434
- .word 17738
- .word 17136
- .word 16639
diff --git a/arch/sh/lib64/strcpy.S b/arch/sh/lib64/strcpy.S
deleted file mode 100644
index b61631e..0000000
--- a/arch/sh/lib64/strcpy.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-! Entry: arg0: destination
-! arg1: source
-! Exit: result: destination
-!
-! SH5 code Copyright 2002 SuperH Ltd.
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define SHHI shlld
-#define SHLO shlrd
-#else
-#define SHHI shlrd
-#define SHLO shlld
-#endif
-
- .section .text..SHmedia32,"ax"
- .globl strcpy
- .type strcpy, @function
- .align 5
-
-strcpy:
-
- pta/l shortstring,tr1
- ldlo.q r3,0,r4
- ptabs r18,tr4
- shlli r3,3,r7
- addi r2, 8, r0
- mcmpeq.b r4,r63,r6
- SHHI r6,r7,r6
- bnei/u r6,0,tr1 // shortstring
- pta/l no_lddst, tr2
- ori r3,-8,r23
- sub r2, r23, r0
- sub r3, r2, r21
- addi r21, 8, r20
- ldx.q r0, r21, r5
- pta/l loop, tr0
- ori r2,-8,r22
- mcmpeq.b r5, r63, r6
- bgt/u r22, r23, tr2 // no_lddst
-
- // r22 < r23 : Need to do a load from the destination.
- // r22 == r23 : Doesn't actually need to load from destination,
- // but still can be handled here.
- ldlo.q r2, 0, r9
- movi -1, r8
- SHLO r8, r7, r8
- mcmv r4, r8, r9
- stlo.q r2, 0, r9
- beqi/l r6, 0, tr0 // loop
-
- add r5, r63, r4
- addi r0, 8, r0
- blink tr1, r63 // shortstring
-no_lddst:
- // r22 > r23: note that for r22 == r23 the sthi.q would clobber
- // bytes before the destination region.
- stlo.q r2, 0, r4
- SHHI r4, r7, r4
- sthi.q r0, -1, r4
- beqi/l r6, 0, tr0 // loop
-
- add r5, r63, r4
- addi r0, 8, r0
-shortstring:
-#if __BYTE_ORDER != __LITTLE_ENDIAN
- pta/l shortstring2,tr1
- byterev r4,r4
-#endif
-shortstring2:
- st.b r0,-8,r4
- andi r4,0xff,r5
- shlri r4,8,r4
- addi r0,1,r0
- bnei/l r5,0,tr1
- blink tr4,r63 // return
-
- .balign 8
-loop:
- stlo.q r0, 0, r5
- ldx.q r0, r20, r4
- addi r0, 16, r0
- sthi.q r0, -9, r5
- mcmpeq.b r4, r63, r6
- bnei/u r6, 0, tr1 // shortstring
- ldx.q r0, r21, r5
- stlo.q r0, -8, r4
- sthi.q r0, -1, r4
- mcmpeq.b r5, r63, r6
- beqi/l r6, 0, tr0 // loop
-
- add r5, r63, r4
- addi r0, 8, r0
- blink tr1, r63 // shortstring
-
- .size strcpy,.-strcpy
diff --git a/arch/sh/lib64/strlen.S b/arch/sh/lib64/strlen.S
deleted file mode 100644
index c00b972..0000000
--- a/arch/sh/lib64/strlen.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Simplistic strlen() implementation for SHmedia.
- *
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- */
-
- .section .text..SHmedia32,"ax"
- .globl strlen
- .type strlen,@function
-
- .balign 16
-strlen:
- ptabs r18, tr4
-
- /*
- * Note: We could easily deal with the NULL case here with a simple
- * sanity check, though it seems that the behavior we want is to fault
- * in the event that r2 == NULL, so we don't bother.
- */
-/* beqi r2, 0, tr4 */ ! Sanity check
-
- movi -1, r0
- pta/l loop, tr0
-loop:
- ld.b r2, 0, r1
- addi r2, 1, r2
- addi r0, 1, r0
- bnei/l r1, 0, tr0
-
- or r0, r63, r2
- blink tr4, r63
-
- .size strlen,.-strlen
diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c
deleted file mode 100644
index f215b06..0000000
--- a/arch/sh/lib64/udelay.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/sh/lib64/udelay.c
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/sched.h>
-#include <asm/param.h>
-
-/*
- * Use only for very small delays (< 1 msec).
- *
- * The active part of our cycle counter is only 32-bits wide, and
- * we're treating the difference between two marks as signed. On
- * a 1GHz box, that's about 2 seconds.
- */
-
-void __delay(unsigned long loops)
-{
- long long dummy;
- __asm__ __volatile__("gettr tr0, %1\n\t"
- "pta $+4, tr0\n\t"
- "addi %0, -1, %0\n\t"
- "bne %0, r63, tr0\n\t"
- "ptabs %1, tr0\n\t":"=r"(loops),
- "=r"(dummy)
- :"0"(loops));
-}
-
-void __const_udelay(unsigned long xloops)
-{
- __delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
-}
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
-}
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00000005);
-}
diff --git a/arch/sh/lib64/udivdi3.S b/arch/sh/lib64/udivdi3.S
deleted file mode 100644
index c032cb157..0000000
--- a/arch/sh/lib64/udivdi3.S
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .section .text..SHmedia32,"ax"
- .align 2
- .global __udivdi3
-__udivdi3:
- shlri r3,1,r4
- nsb r4,r22
- shlld r3,r22,r6
- shlri r6,49,r5
- movi 0xffffffffffffbaf1,r21 /* .l shift count 17. */
- sub r21,r5,r1
- mmulfx.w r1,r1,r4
- mshflo.w r1,r63,r1
- sub r63,r22,r20 // r63 == 64 % 64
- mmulfx.w r5,r4,r4
- pta large_divisor,tr0
- addi r20,32,r9
- msub.w r1,r4,r1
- madd.w r1,r1,r1
- mmulfx.w r1,r1,r4
- shlri r6,32,r7
- bgt/u r9,r63,tr0 // large_divisor
- mmulfx.w r5,r4,r4
- shlri r2,32+14,r19
- addi r22,-31,r0
- msub.w r1,r4,r1
-
- mulu.l r1,r7,r4
- addi r1,-3,r5
- mulu.l r5,r19,r5
- sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
- shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
- the case may be, %0000000000000000 000.11111111111, still */
- muls.l r1,r4,r4 /* leaving at least one sign bit. */
- mulu.l r5,r3,r8
- mshalds.l r1,r21,r1
- shari r4,26,r4
- shlld r8,r0,r8
- add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
- sub r2,r8,r2
- /* Can do second step of 64 : 32 div now, using r1 and the rest in r2. */
-
- shlri r2,22,r21
- mulu.l r21,r1,r21
- shlld r5,r0,r8
- addi r20,30-22,r0
- shlrd r21,r0,r21
- mulu.l r21,r3,r5
- add r8,r21,r8
- mcmpgt.l r21,r63,r21 // See Note 1
- addi r20,30,r0
- mshfhi.l r63,r21,r21
- sub r2,r5,r2
- andc r2,r21,r2
-
- /* small divisor: need a third divide step */
- mulu.l r2,r1,r7
- ptabs r18,tr0
- addi r2,1,r2
- shlrd r7,r0,r7
- mulu.l r7,r3,r5
- add r8,r7,r8
- sub r2,r3,r2
- cmpgt r2,r5,r5
- add r8,r5,r2
- /* could test r3 here to check for divide by zero. */
- blink tr0,r63
-
-large_divisor:
- mmulfx.w r5,r4,r4
- shlrd r2,r9,r25
- shlri r25,32,r8
- msub.w r1,r4,r1
-
- mulu.l r1,r7,r4
- addi r1,-3,r5
- mulu.l r5,r8,r5
- sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
- shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
- the case may be, %0000000000000000 000.11111111111, still */
- muls.l r1,r4,r4 /* leaving at least one sign bit. */
- shlri r5,14-1,r8
- mulu.l r8,r7,r5
- mshalds.l r1,r21,r1
- shari r4,26,r4
- add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
- sub r25,r5,r25
- /* Can do second step of 64 : 32 div now, using r1 and the rest in r25. */
-
- shlri r25,22,r21
- mulu.l r21,r1,r21
- pta no_lo_adj,tr0
- addi r22,32,r0
- shlri r21,40,r21
- mulu.l r21,r7,r5
- add r8,r21,r8
- shlld r2,r0,r2
- sub r25,r5,r25
- bgtu/u r7,r25,tr0 // no_lo_adj
- addi r8,1,r8
- sub r25,r7,r25
-no_lo_adj:
- mextr4 r2,r25,r2
-
- /* large_divisor: only needs a few adjustments. */
- mulu.l r8,r6,r5
- ptabs r18,tr0
- /* bubble */
- cmpgtu r5,r2,r5
- sub r8,r5,r2
- blink tr0,r63
-
-/* Note 1: To shift the result of the second divide stage so that the result
- always fits into 32 bits, yet we still reduce the rest sufficiently
- would require a lot of instructions to do the shifts just right. Using
- the full 64 bit shift result to multiply with the divisor would require
- four extra instructions for the upper 32 bits (shift / mulu / shift / sub).
- Fortunately, if the upper 32 bits of the shift result are nonzero, we
- know that the rest after taking this partial result into account will
- fit into 32 bits. So we just clear the upper 32 bits of the rest if the
- upper 32 bits of the partial result are nonzero. */
diff --git a/arch/sh/lib64/udivsi3.S b/arch/sh/lib64/udivsi3.S
deleted file mode 100644
index e4788fb..0000000
--- a/arch/sh/lib64/udivsi3.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .global __udivsi3
- .section .text..SHmedia32,"ax"
- .align 2
-
-/*
- inputs: r4,r5
- clobbered: r18,r19,r20,r21,r22,r25,tr0
- result in r0.
- */
-__udivsi3:
- addz.l r5,r63,r22
- nsb r22,r0
- shlld r22,r0,r25
- shlri r25,48,r25
- movi 0xffffffffffffbb0c,r20 /* shift count eqiv 76 */
- sub r20,r25,r21
- mmulfx.w r21,r21,r19
- mshflo.w r21,r63,r21
- ptabs r18,tr0
- mmulfx.w r25,r19,r19
- sub r20,r0,r0
- /* bubble */
- msub.w r21,r19,r19
-
- /*
- * It would be nice for scheduling to do this add to r21 before
- * the msub.w, but we need a different value for r19 to keep
- * errors under control.
- */
- addi r19,-2,r21
- mulu.l r4,r21,r18
- mmulfx.w r19,r19,r19
- shlli r21,15,r21
- shlrd r18,r0,r18
- mulu.l r18,r22,r20
- mmacnfx.wl r25,r19,r21
- /* bubble */
- sub r4,r20,r25
-
- mulu.l r25,r21,r19
- addi r0,14,r0
- /* bubble */
- shlrd r19,r0,r19
- mulu.l r19,r22,r20
- add r18,r19,r18
- /* bubble */
- sub.l r25,r20,r25
-
- mulu.l r25,r21,r19
- addz.l r25,r63,r25
- sub r25,r22,r25
- shlrd r19,r0,r19
- mulu.l r19,r22,r20
- addi r25,1,r25
- add r18,r19,r18
-
- cmpgt r25,r20,r25
- add.l r18,r25,r0
- blink tr0,r63
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5c8a2eb..6c39d24 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -15,8 +15,7 @@
config PAGE_OFFSET
hex
- default "0x80000000" if MMU && SUPERH32
- default "0x20000000" if MMU && SUPERH64
+ default "0x80000000" if MMU
default "0x00000000"
config FORCE_MAX_ZONEORDER
@@ -72,12 +71,11 @@
config 29BIT
def_bool !32BIT
- depends on SUPERH32
select UNCACHED_MAPPING
config 32BIT
bool
- default y if CPU_SH5 || !MMU
+ default !MMU
config PMB
bool "Support 32-bit physical addressing through PMB"
@@ -152,7 +150,7 @@
config IOREMAP_FIXED
def_bool y
- depends on X2TLB || SUPERH64
+ depends on X2TLB
config UNCACHED_MAPPING
bool
@@ -184,7 +182,7 @@
config PAGE_SIZE_64KB
bool "64kB"
- depends on !MMU || CPU_SH4 || CPU_SH5
+ depends on !MMU || CPU_SH4
help
This enables support for 64kB pages, possible on all SH-4
CPUs and later.
@@ -216,10 +214,6 @@
bool "64MB"
depends on X2TLB
-config HUGETLB_PAGE_SIZE_512MB
- bool "512MB"
- depends on CPU_SH5
-
endchoice
config SCHED_MC
@@ -242,7 +236,7 @@
choice
prompt "Cache mode"
- default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
+ default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
config CACHE_WRITEBACK
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 5051b38f..487da0f 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -10,15 +10,14 @@
cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_CPU_SH5) := cache-sh5.o flush-sh4.o
cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o
obj-y += $(cacheops-y)
mmu-y := nommu.o extable_32.o
-mmu-$(CONFIG_MMU) := extable_$(BITS).o fault.o ioremap.o kmap.o \
- pgtable.o tlbex_$(BITS).o tlbflush_$(BITS).o
+mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \
+ pgtable.o tlbex_32.o tlbflush_32.o
obj-y += $(mmu-y)
@@ -31,7 +30,6 @@
debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o
tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_SH5) := tlb-sh5.o
tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
obj-y += $(tlb-y)
endif
@@ -46,29 +44,4 @@
GCOV_PROFILE_pmb.o := n
-# Special flags for tlbex_64.o. This puts restrictions on the number of
-# caller-save registers that the compiler can target when building this file.
-# This is required because the code is called from a context in entry.S where
-# very few registers have been saved in the exception handler (for speed
-# reasons).
-# The caller save registers that have been saved and which can be used are
-# r2,r3,r4,r5 : argument passing
-# r15, r18 : SP and LINK
-# tr0-4 : allow all caller-save TR's. The compiler seems to be able to make
-# use of them, so it's probably beneficial to performance to save them
-# and have them available for it.
-#
-# The resources not listed below are callee save, i.e. the compiler is free to
-# use any of them and will spill them to the stack itself.
-
-CFLAGS_tlbex_64.o += -ffixed-r7 \
- -ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
- -ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
- -ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
- -ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
- -ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
- -ffixed-r41 -ffixed-r42 -ffixed-r43 \
- -ffixed-r60 -ffixed-r61 -ffixed-r62 \
- -fomit-frame-pointer
-
ccflags-y := -Werror
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
deleted file mode 100644
index 442a77c..0000000
--- a/arch/sh/mm/cache-sh5.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- * arch/sh/mm/cache-sh5.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2002 Benedict Gaster
- * Copyright (C) 2003 Richard Curnow
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <asm/tlb.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-
-extern void __weak sh4__flush_region_init(void);
-
-/* Wired TLB entry for the D-cache */
-static unsigned long long dtlb_cache_slot;
-
-/*
- * The following group of functions deal with mapping and unmapping a
- * temporary page into a DTLB slot that has been set aside for exclusive
- * use.
- */
-static inline void
-sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
- unsigned long paddr)
-{
- local_irq_disable();
- sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
-}
-
-static inline void sh64_teardown_dtlb_cache_slot(void)
-{
- sh64_teardown_tlb_slot(dtlb_cache_slot);
- local_irq_enable();
-}
-
-static inline void sh64_icache_inv_all(void)
-{
- unsigned long long addr, flag, data;
- unsigned long flags;
-
- addr = ICCR0;
- flag = ICCR0_ICI;
- data = 0;
-
- /* Make this a critical section for safety (probably not strictly necessary.) */
- local_irq_save(flags);
-
- /* Without %1 it gets unexplicably wrong */
- __asm__ __volatile__ (
- "getcfg %3, 0, %0\n\t"
- "or %0, %2, %0\n\t"
- "putcfg %3, 0, %0\n\t"
- "synci"
- : "=&r" (data)
- : "0" (data), "r" (flag), "r" (addr));
-
- local_irq_restore(flags);
-}
-
-static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
-{
- /* Invalidate range of addresses [start,end] from the I-cache, where
- * the addresses lie in the kernel superpage. */
-
- unsigned long long ullend, addr, aligned_start;
- aligned_start = (unsigned long long)(signed long long)(signed long) start;
- addr = L1_CACHE_ALIGN(aligned_start);
- ullend = (unsigned long long) (signed long long) (signed long) end;
-
- while (addr <= ullend) {
- __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
- addr += L1_CACHE_BYTES;
- }
-}
-
-static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr)
-{
- /* If we get called, we know that vma->vm_flags contains VM_EXEC.
- Also, eaddr is page-aligned. */
- unsigned int cpu = smp_processor_id();
- unsigned long long addr, end_addr;
- unsigned long flags = 0;
- unsigned long running_asid, vma_asid;
- addr = eaddr;
- end_addr = addr + PAGE_SIZE;
-
- /* Check whether we can use the current ASID for the I-cache
- invalidation. For example, if we're called via
- access_process_vm->flush_cache_page->here, (e.g. when reading from
- /proc), 'running_asid' will be that of the reader, not of the
- victim.
-
- Also, note the risk that we might get pre-empted between the ASID
- compare and blocking IRQs, and before we regain control, the
- pid->ASID mapping changes. However, the whole cache will get
- invalidated when the mapping is renewed, so the worst that can
- happen is that the loop below ends up invalidating somebody else's
- cache entries.
- */
-
- running_asid = get_asid();
- vma_asid = cpu_asid(cpu, vma->vm_mm);
- if (running_asid != vma_asid) {
- local_irq_save(flags);
- switch_and_save_asid(vma_asid);
- }
- while (addr < end_addr) {
- /* Worth unrolling a little */
- __asm__ __volatile__("icbi %0, 0" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 32" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 64" : : "r" (addr));
- __asm__ __volatile__("icbi %0, 96" : : "r" (addr));
- addr += 128;
- }
- if (running_asid != vma_asid) {
- switch_and_save_asid(running_asid);
- local_irq_restore(flags);
- }
-}
-
-static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- /* Used for invalidating big chunks of I-cache, i.e. assume the range
- is whole pages. If 'start' or 'end' is not page aligned, the code
- is conservative and invalidates to the ends of the enclosing pages.
- This is functionally OK, just a performance loss. */
-
- /* See the comments below in sh64_dcache_purge_user_range() regarding
- the choice of algorithm. However, for the I-cache option (2) isn't
- available because there are no physical tags so aliases can't be
- resolved. The icbi instruction has to be used through the user
- mapping. Because icbi is cheaper than ocbp on a cache hit, it
- would be cheaper to use the selective code for a large range than is
- possible with the D-cache. Just assume 64 for now as a working
- figure.
- */
- int n_pages;
-
- if (!mm)
- return;
-
- n_pages = ((end - start) >> PAGE_SHIFT);
- if (n_pages >= 64) {
- sh64_icache_inv_all();
- } else {
- unsigned long aligned_start;
- unsigned long eaddr;
- unsigned long after_last_page_start;
- unsigned long mm_asid, current_asid;
- unsigned long flags = 0;
-
- mm_asid = cpu_asid(smp_processor_id(), mm);
- current_asid = get_asid();
-
- if (mm_asid != current_asid) {
- /* Switch ASID and run the invalidate loop under cli */
- local_irq_save(flags);
- switch_and_save_asid(mm_asid);
- }
-
- aligned_start = start & PAGE_MASK;
- after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
-
- while (aligned_start < after_last_page_start) {
- struct vm_area_struct *vma;
- unsigned long vma_end;
- vma = find_vma(mm, aligned_start);
- if (!vma || (aligned_start <= vma->vm_end)) {
- /* Avoid getting stuck in an error condition */
- aligned_start += PAGE_SIZE;
- continue;
- }
- vma_end = vma->vm_end;
- if (vma->vm_flags & VM_EXEC) {
- /* Executable */
- eaddr = aligned_start;
- while (eaddr < vma_end) {
- sh64_icache_inv_user_page(vma, eaddr);
- eaddr += PAGE_SIZE;
- }
- }
- aligned_start = vma->vm_end; /* Skip to start of next region */
- }
-
- if (mm_asid != current_asid) {
- switch_and_save_asid(current_asid);
- local_irq_restore(flags);
- }
- }
-}
-
-static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
-{
- /* The icbi instruction never raises ITLBMISS. i.e. if there's not a
- cache hit on the virtual tag the instruction ends there, without a
- TLB lookup. */
-
- unsigned long long aligned_start;
- unsigned long long ull_end;
- unsigned long long addr;
-
- ull_end = end;
-
- /* Just invalidate over the range using the natural addresses. TLB
- miss handling will be OK (TBC). Since it's for the current process,
- either we're already in the right ASID context, or the ASIDs have
- been recycled since we were last active in which case we might just
- invalidate another processes I-cache entries : no worries, just a
- performance drop for him. */
- aligned_start = L1_CACHE_ALIGN(start);
- addr = aligned_start;
- while (addr < ull_end) {
- __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
- __asm__ __volatile__ ("nop");
- __asm__ __volatile__ ("nop");
- addr += L1_CACHE_BYTES;
- }
-}
-
-/* Buffer used as the target of alloco instructions to purge data from cache
- sets by natural eviction. -- RPC */
-#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
-static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
-
-static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
-{
- /* Purge all ways in a particular block of sets, specified by the base
- set number and number of sets. Can handle wrap-around, if that's
- needed. */
-
- int dummy_buffer_base_set;
- unsigned long long eaddr, eaddr0, eaddr1;
- int j;
- int set_offset;
-
- dummy_buffer_base_set = ((int)&dummy_alloco_area &
- cpu_data->dcache.entry_mask) >>
- cpu_data->dcache.entry_shift;
- set_offset = sets_to_purge_base - dummy_buffer_base_set;
-
- for (j = 0; j < n_sets; j++, set_offset++) {
- set_offset &= (cpu_data->dcache.sets - 1);
- eaddr0 = (unsigned long long)dummy_alloco_area +
- (set_offset << cpu_data->dcache.entry_shift);
-
- /*
- * Do one alloco which hits the required set per cache
- * way. For write-back mode, this will purge the #ways
- * resident lines. There's little point unrolling this
- * loop because the allocos stall more if they're too
- * close together.
- */
- eaddr1 = eaddr0 + cpu_data->dcache.way_size *
- cpu_data->dcache.ways;
-
- for (eaddr = eaddr0; eaddr < eaddr1;
- eaddr += cpu_data->dcache.way_size) {
- __asm__ __volatile__ ("alloco %0, 0" : : "r" (eaddr));
- __asm__ __volatile__ ("synco"); /* TAKum03020 */
- }
-
- eaddr1 = eaddr0 + cpu_data->dcache.way_size *
- cpu_data->dcache.ways;
-
- for (eaddr = eaddr0; eaddr < eaddr1;
- eaddr += cpu_data->dcache.way_size) {
- /*
- * Load from each address. Required because
- * alloco is a NOP if the cache is write-through.
- */
- if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
- __raw_readb((unsigned long)eaddr);
- }
- }
-
- /*
- * Don't use OCBI to invalidate the lines. That costs cycles
- * directly. If the dummy block is just left resident, it will
- * naturally get evicted as required.
- */
-}
-
-/*
- * Purge the entire contents of the dcache. The most efficient way to
- * achieve this is to use alloco instructions on a region of unused
- * memory equal in size to the cache, thereby causing the current
- * contents to be discarded by natural eviction. The alternative, namely
- * reading every tag, setting up a mapping for the corresponding page and
- * doing an OCBP for the line, would be much more expensive.
- */
-static void sh64_dcache_purge_all(void)
-{
-
- sh64_dcache_purge_sets(0, cpu_data->dcache.sets);
-}
-
-
-/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for
- anything else in the kernel */
-#define MAGIC_PAGE0_START 0xffffffffec000000ULL
-
-/* Purge the physical page 'paddr' from the cache. It's known that any
- * cache lines requiring attention have the same page colour as the the
- * address 'eaddr'.
- *
- * This relies on the fact that the D-cache matches on physical tags when
- * no virtual tag matches. So we create an alias for the original page
- * and purge through that. (Alternatively, we could have done this by
- * switching ASID to match the original mapping and purged through that,
- * but that involves ASID switching cost + probably a TLBMISS + refill
- * anyway.)
- */
-static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr,
- unsigned long eaddr)
-{
- unsigned long long magic_page_start;
- unsigned long long magic_eaddr, magic_eaddr_end;
-
- magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK);
-
- /* As long as the kernel is not pre-emptible, this doesn't need to be
- under cli/sti. */
- sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr);
-
- magic_eaddr = magic_page_start;
- magic_eaddr_end = magic_eaddr + PAGE_SIZE;
-
- while (magic_eaddr < magic_eaddr_end) {
- /* Little point in unrolling this loop - the OCBPs are blocking
- and won't go any quicker (i.e. the loop overhead is parallel
- to part of the OCBP execution.) */
- __asm__ __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr));
- magic_eaddr += L1_CACHE_BYTES;
- }
-
- sh64_teardown_dtlb_cache_slot();
-}
-
-/*
- * Purge a page given its physical start address, by creating a temporary
- * 1 page mapping and purging across that. Even if we know the virtual
- * address (& vma or mm) of the page, the method here is more elegant
- * because it avoids issues of coping with page faults on the purge
- * instructions (i.e. no special-case code required in the critical path
- * in the TLB miss handling).
- */
-static void sh64_dcache_purge_phy_page(unsigned long paddr)
-{
- unsigned long long eaddr_start, eaddr, eaddr_end;
- int i;
-
- /* As long as the kernel is not pre-emptible, this doesn't need to be
- under cli/sti. */
- eaddr_start = MAGIC_PAGE0_START;
- for (i = 0; i < (1 << CACHE_OC_N_SYNBITS); i++) {
- sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr);
-
- eaddr = eaddr_start;
- eaddr_end = eaddr + PAGE_SIZE;
- while (eaddr < eaddr_end) {
- __asm__ __volatile__ ("ocbp %0, 0" : : "r" (eaddr));
- eaddr += L1_CACHE_BYTES;
- }
-
- sh64_teardown_dtlb_cache_slot();
- eaddr_start += PAGE_SIZE;
- }
-}
-
-static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
- unsigned long addr, unsigned long end)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
- spinlock_t *ptl;
- unsigned long paddr;
-
- if (!mm)
- return; /* No way to find physical address of page */
-
- pgd = pgd_offset(mm, addr);
- if (pgd_bad(*pgd))
- return;
-
- p4d = p4d_offset(pgd, addr);
- if (p4d_none(*p4d) || p4d_bad(*p4d))
- return;
-
- pud = pud_offset(p4d, addr);
- if (pud_none(*pud) || pud_bad(*pud))
- return;
-
- pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd) || pmd_bad(*pmd))
- return;
-
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- do {
- entry = *pte;
- if (pte_none(entry) || !pte_present(entry))
- continue;
- paddr = pte_val(entry) & PAGE_MASK;
- sh64_dcache_purge_coloured_phy_page(paddr, addr);
- } while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap_unlock(pte - 1, ptl);
-}
-
-/*
- * There are at least 5 choices for the implementation of this, with
- * pros (+), cons(-), comments(*):
- *
- * 1. ocbp each line in the range through the original user's ASID
- * + no lines spuriously evicted
- * - tlbmiss handling (must either handle faults on demand => extra
- * special-case code in tlbmiss critical path), or map the page in
- * advance (=> flush_tlb_range in advance to avoid multiple hits)
- * - ASID switching
- * - expensive for large ranges
- *
- * 2. temporarily map each page in the range to a special effective
- * address and ocbp through the temporary mapping; relies on the
- * fact that SH-5 OCB* always do TLB lookup and match on ptags (they
- * never look at the etags)
- * + no spurious evictions
- * - expensive for large ranges
- * * surely cheaper than (1)
- *
- * 3. walk all the lines in the cache, check the tags, if a match
- * occurs create a page mapping to ocbp the line through
- * + no spurious evictions
- * - tag inspection overhead
- * - (especially for small ranges)
- * - potential cost of setting up/tearing down page mapping for
- * every line that matches the range
- * * cost partly independent of range size
- *
- * 4. walk all the lines in the cache, check the tags, if a match
- * occurs use 4 * alloco to purge the line (+3 other probably
- * innocent victims) by natural eviction
- * + no tlb mapping overheads
- * - spurious evictions
- * - tag inspection overhead
- *
- * 5. implement like flush_cache_all
- * + no tag inspection overhead
- * - spurious evictions
- * - bad for small ranges
- *
- * (1) can be ruled out as more expensive than (2). (2) appears best
- * for small ranges. The choice between (3), (4) and (5) for large
- * ranges and the range size for the large/small boundary need
- * benchmarking to determine.
- *
- * For now use approach (2) for small ranges and (5) for large ones.
- */
-static void sh64_dcache_purge_user_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- int n_pages = ((end - start) >> PAGE_SHIFT);
-
- if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
- sh64_dcache_purge_all();
- } else {
- /* Small range, covered by a single page table page */
- start &= PAGE_MASK; /* should already be so */
- end = PAGE_ALIGN(end); /* should already be so */
- sh64_dcache_purge_user_pages(mm, start, end);
- }
-}
-
-/*
- * Invalidate the entire contents of both caches, after writing back to
- * memory any dirty data from the D-cache.
- */
-static void sh5_flush_cache_all(void *unused)
-{
- sh64_dcache_purge_all();
- sh64_icache_inv_all();
-}
-
-/*
- * Invalidate an entire user-address space from both caches, after
- * writing back dirty data (e.g. for shared mmap etc).
- *
- * This could be coded selectively by inspecting all the tags then
- * doing 4*alloco on any set containing a match (as for
- * flush_cache_range), but fork/exit/execve (where this is called from)
- * are expensive anyway.
- *
- * Have to do a purge here, despite the comments re I-cache below.
- * There could be odd-coloured dirty data associated with the mm still
- * in the cache - if this gets written out through natural eviction
- * after the kernel has reused the page there will be chaos.
- *
- * The mm being torn down won't ever be active again, so any Icache
- * lines tagged with its ASID won't be visible for the rest of the
- * lifetime of this ASID cycle. Before the ASID gets reused, there
- * will be a flush_cache_all. Hence we don't need to touch the
- * I-cache. This is similar to the lack of action needed in
- * flush_tlb_mm - see fault.c.
- */
-static void sh5_flush_cache_mm(void *unused)
-{
- sh64_dcache_purge_all();
-}
-
-/*
- * Invalidate (from both caches) the range [start,end) of virtual
- * addresses from the user address space specified by mm, after writing
- * back any dirty data.
- *
- * Note, 'end' is 1 byte beyond the end of the range to flush.
- */
-static void sh5_flush_cache_range(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long start, end;
-
- vma = data->vma;
- start = data->addr1;
- end = data->addr2;
-
- sh64_dcache_purge_user_range(vma->vm_mm, start, end);
- sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
-}
-
-/*
- * Invalidate any entries in either cache for the vma within the user
- * address space vma->vm_mm for the page starting at virtual address
- * 'eaddr'. This seems to be used primarily in breaking COW. Note,
- * the I-cache must be searched too in case the page in question is
- * both writable and being executed from (e.g. stack trampolines.)
- *
- * Note, this is called with pte lock held.
- */
-static void sh5_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long eaddr, pfn;
-
- vma = data->vma;
- eaddr = data->addr1;
- pfn = data->addr2;
-
- sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
-
- if (vma->vm_flags & VM_EXEC)
- sh64_icache_inv_user_page(vma, eaddr);
-}
-
-static void sh5_flush_dcache_page(void *page)
-{
- sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
- wmb();
-}
-
-/*
- * Flush the range [start,end] of kernel virtual address space from
- * the I-cache. The corresponding range must be purged from the
- * D-cache also because the SH-5 doesn't have cache snooping between
- * the caches. The addresses will be visible through the superpage
- * mapping, therefore it's guaranteed that there no cache entries for
- * the range in cache sets of the wrong colour.
- */
-static void sh5_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
-
- start = data->addr1;
- end = data->addr2;
-
- __flush_purge_region((void *)start, end);
- wmb();
- sh64_icache_inv_kernel_range(start, end);
-}
-
-/*
- * For the address range [start,end), write back the data from the
- * D-cache and invalidate the corresponding region of the I-cache for the
- * current process. Used to flush signal trampolines on the stack to
- * make them executable.
- */
-static void sh5_flush_cache_sigtramp(void *vaddr)
-{
- unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
-
- __flush_wback_region(vaddr, L1_CACHE_BYTES);
- wmb();
- sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
-}
-
-void __init sh5_cache_init(void)
-{
- local_flush_cache_all = sh5_flush_cache_all;
- local_flush_cache_mm = sh5_flush_cache_mm;
- local_flush_cache_dup_mm = sh5_flush_cache_mm;
- local_flush_cache_page = sh5_flush_cache_page;
- local_flush_cache_range = sh5_flush_cache_range;
- local_flush_dcache_page = sh5_flush_dcache_page;
- local_flush_icache_range = sh5_flush_icache_range;
- local_flush_cache_sigtramp = sh5_flush_cache_sigtramp;
-
- /* Reserve a slot for dcache colouring in the DTLB */
- dtlb_cache_slot = sh64_get_wired_dtlb_entry();
-
- sh4__flush_region_init();
-}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 464f160..3aef78c 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -355,12 +355,6 @@
}
}
- if (boot_cpu_data.family == CPU_FAMILY_SH5) {
- extern void __weak sh5_cache_init(void);
-
- sh5_cache_init();
- }
-
skip:
emit_cache_params();
}
diff --git a/arch/sh/mm/extable_64.c b/arch/sh/mm/extable_64.c
deleted file mode 100644
index 7a3b4d3..0000000
--- a/arch/sh/mm/extable_64.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/sh/mm/extable_64.c
- *
- * Copyright (C) 2003 Richard Curnow
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * Cloned from the 2.5 SH version..
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/bsearch.h>
-#include <linux/rwsem.h>
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-extern unsigned long copy_user_memcpy, copy_user_memcpy_end;
-extern void __copy_user_fixup(void);
-
-static const struct exception_table_entry __copy_user_fixup_ex = {
- .fixup = (unsigned long)&__copy_user_fixup,
-};
-
-/*
- * Some functions that may trap due to a bad user-mode address have too
- * many loads and stores in them to make it at all practical to label
- * each one and put them all in the main exception table.
- *
- * In particular, the fast memcpy routine is like this. It's fix-up is
- * just to fall back to a slow byte-at-a-time copy, which is handled the
- * conventional way. So it's functionally OK to just handle any trap
- * occurring in the fast memcpy with that fixup.
- */
-static const struct exception_table_entry *check_exception_ranges(unsigned long addr)
-{
- if ((addr >= (unsigned long)©_user_memcpy) &&
- (addr <= (unsigned long)©_user_memcpy_end))
- return &__copy_user_fixup_ex;
-
- return NULL;
-}
-
-static int cmp_ex_search(const void *key, const void *elt)
-{
- const struct exception_table_entry *_elt = elt;
- unsigned long _key = *(unsigned long *)key;
-
- /* avoid overflow */
- if (_key > _elt->insn)
- return 1;
- if (_key < _elt->insn)
- return -1;
- return 0;
-}
-
-/* Simple binary search */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *base,
- const size_t num,
- unsigned long value)
-{
- const struct exception_table_entry *mid;
-
- mid = check_exception_ranges(value);
- if (mid)
- return mid;
-
- return bsearch(&value, base, num,
- sizeof(struct exception_table_entry), cmp_ex_search);
-}
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return 1;
- }
-
- return 0;
-}
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
deleted file mode 100644
index e4bb2a8..0000000
--- a/arch/sh/mm/tlb-sh5.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * arch/sh/mm/tlb-sh5.c
- *
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- * Copyright (C) 2003 Richard Curnow <richard.curnow@superh.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/**
- * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
- */
-int sh64_tlb_init(void)
-{
- /* Assign some sane DTLB defaults */
- cpu_data->dtlb.entries = 64;
- cpu_data->dtlb.step = 0x10;
-
- cpu_data->dtlb.first = DTLB_FIXED | cpu_data->dtlb.step;
- cpu_data->dtlb.next = cpu_data->dtlb.first;
-
- cpu_data->dtlb.last = DTLB_FIXED |
- ((cpu_data->dtlb.entries - 1) *
- cpu_data->dtlb.step);
-
- /* And again for the ITLB */
- cpu_data->itlb.entries = 64;
- cpu_data->itlb.step = 0x10;
-
- cpu_data->itlb.first = ITLB_FIXED | cpu_data->itlb.step;
- cpu_data->itlb.next = cpu_data->itlb.first;
- cpu_data->itlb.last = ITLB_FIXED |
- ((cpu_data->itlb.entries - 1) *
- cpu_data->itlb.step);
-
- return 0;
-}
-
-/**
- * sh64_next_free_dtlb_entry - Find the next available DTLB entry
- */
-unsigned long long sh64_next_free_dtlb_entry(void)
-{
- return cpu_data->dtlb.next;
-}
-
-/**
- * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
- */
-unsigned long long sh64_get_wired_dtlb_entry(void)
-{
- unsigned long long entry = sh64_next_free_dtlb_entry();
-
- cpu_data->dtlb.first += cpu_data->dtlb.step;
- cpu_data->dtlb.next += cpu_data->dtlb.step;
-
- return entry;
-}
-
-/**
- * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
- *
- * @entry: Address of TLB slot.
- *
- * Works like a stack, last one to allocate must be first one to free.
- */
-int sh64_put_wired_dtlb_entry(unsigned long long entry)
-{
- __flush_tlb_slot(entry);
-
- /*
- * We don't do any particularly useful tracking of wired entries,
- * so this approach works like a stack .. last one to be allocated
- * has to be the first one to be freed.
- *
- * We could potentially load wired entries into a list and work on
- * rebalancing the list periodically (which also entails moving the
- * contents of a TLB entry) .. though I have a feeling that this is
- * more trouble than it's worth.
- */
-
- /*
- * Entry must be valid .. we don't want any ITLB addresses!
- */
- if (entry <= DTLB_FIXED)
- return -EINVAL;
-
- /*
- * Next, check if we're within range to be freed. (ie, must be the
- * entry beneath the first 'free' entry!
- */
- if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step))
- return -EINVAL;
-
- /* If we are, then bring this entry back into the list */
- cpu_data->dtlb.first -= cpu_data->dtlb.step;
- cpu_data->dtlb.next = entry;
-
- return 0;
-}
-
-/**
- * sh64_setup_tlb_slot - Load up a translation in a wired slot.
- *
- * @config_addr: Address of TLB slot.
- * @eaddr: Virtual address.
- * @asid: Address Space Identifier.
- * @paddr: Physical address.
- *
- * Load up a virtual<->physical translation for @eaddr<->@paddr in the
- * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
- */
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
- unsigned long asid, unsigned long paddr)
-{
- unsigned long long pteh, ptel;
-
- pteh = neff_sign_extend(eaddr);
- pteh &= PAGE_MASK;
- pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
- ptel = neff_sign_extend(paddr);
- ptel &= PAGE_MASK;
- ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
-
- asm volatile("putcfg %0, 1, %1\n\t"
- "putcfg %0, 0, %2\n"
- : : "r" (config_addr), "r" (ptel), "r" (pteh));
-}
-
-/**
- * sh64_teardown_tlb_slot - Teardown a translation.
- *
- * @config_addr: Address of TLB slot.
- *
- * Teardown any existing mapping in the TLB slot @config_addr.
- */
-void sh64_teardown_tlb_slot(unsigned long long config_addr)
- __attribute__ ((alias("__flush_tlb_slot")));
-
-static int dtlb_entry;
-static unsigned long long dtlb_entries[64];
-
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
- unsigned long long entry;
- unsigned long paddr, flags;
-
- BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
-
- local_irq_save(flags);
-
- entry = sh64_get_wired_dtlb_entry();
- dtlb_entries[dtlb_entry++] = entry;
-
- paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
- paddr &= ~PAGE_MASK;
-
- sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
-
- local_irq_restore(flags);
-}
-
-void tlb_unwire_entry(void)
-{
- unsigned long long entry;
- unsigned long flags;
-
- BUG_ON(!dtlb_entry);
-
- local_irq_save(flags);
- entry = dtlb_entries[dtlb_entry--];
-
- sh64_teardown_tlb_slot(entry);
- sh64_put_wired_dtlb_entry(entry);
-
- local_irq_restore(flags);
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long long ptel;
- unsigned long long pteh=0;
- struct tlb_info *tlbp;
- unsigned long long next;
- unsigned int fault_code = get_thread_fault_code();
-
- /* Get PTEL first */
- ptel = pte.pte_low;
-
- /*
- * Set PTEH register
- */
- pteh = neff_sign_extend(address & MMU_VPN_MASK);
-
- /* Set the ASID. */
- pteh |= get_asid() << PTEH_ASID_SHIFT;
- pteh |= PTEH_VALID;
-
- /* Set PTEL register, set_pte has performed the sign extension */
- ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-
- if (fault_code & FAULT_CODE_ITLB)
- tlbp = &cpu_data->itlb;
- else
- tlbp = &cpu_data->dtlb;
-
- next = tlbp->next;
- __flush_tlb_slot(next);
- asm volatile ("putcfg %0,1,%2\n\n\t"
- "putcfg %0,0,%1\n"
- : : "r" (next), "r" (pteh), "r" (ptel) );
-
- next += TLB_STEP;
- if (next > tlbp->last)
- next = tlbp->first;
- tlbp->next = next;
-}
diff --git a/arch/sh/mm/tlbex_64.c b/arch/sh/mm/tlbex_64.c
deleted file mode 100644
index 0d015f7..0000000
--- a/arch/sh/mm/tlbex_64.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * The SH64 TLB miss.
- *
- * Original code from fault.c
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * Fast PTE->TLB refill path
- * Copyright (C) 2003 Richard.Curnow@superh.com
- *
- * IMPORTANT NOTES :
- * The do_fast_page_fault function is called from a context in entry.S
- * where very few registers have been saved. In particular, the code in
- * this file must be compiled not to use ANY caller-save registers that
- * are not part of the restricted save set. Also, it means that code in
- * this file must not make calls to functions elsewhere in the kernel, or
- * else the excepting context will see corruption in its caller-save
- * registers. Plus, the entry.S save area is non-reentrant, so this code
- * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic
- * on any exception.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kprobes.h>
-#include <asm/tlb.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-static int handle_tlbmiss(unsigned long long protection_flags,
- unsigned long address)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
-
- if (is_vmalloc_addr((void *)address)) {
- pgd = pgd_offset_k(address);
- } else {
- if (unlikely(address >= TASK_SIZE || !current->mm))
- return 1;
-
- pgd = pgd_offset(current->mm, address);
- }
-
- p4d = p4d_offset(pgd, address);
- if (p4d_none(*p4d) || !p4d_present(*p4d))
- return 1;
-
- pud = pud_offset(p4d, address);
- if (pud_none(*pud) || !pud_present(*pud))
- return 1;
-
- pmd = pmd_offset(pud, address);
- if (pmd_none(*pmd) || !pmd_present(*pmd))
- return 1;
-
- pte = pte_offset_kernel(pmd, address);
- entry = *pte;
- if (pte_none(entry) || !pte_present(entry))
- return 1;
-
- /*
- * If the page doesn't have sufficient protection bits set to
- * service the kind of fault being handled, there's not much
- * point doing the TLB refill. Punt the fault to the general
- * handler.
- */
- if ((pte_val(entry) & protection_flags) != protection_flags)
- return 1;
-
- update_mmu_cache(NULL, address, pte);
-
- return 0;
-}
-
-/*
- * Put all this information into one structure so that everything is just
- * arithmetic relative to a single base address. This reduces the number
- * of movi/shori pairs needed just to load addresses of static data.
- */
-struct expevt_lookup {
- unsigned short protection_flags[8];
- unsigned char is_text_access[8];
- unsigned char is_write_access[8];
-};
-
-#define PRU (1<<9)
-#define PRW (1<<8)
-#define PRX (1<<7)
-#define PRR (1<<6)
-
-/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether
- the fault happened in user mode or privileged mode. */
-static struct expevt_lookup expevt_lookup_table = {
- .protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW},
- .is_text_access = {1, 1, 0, 0, 0, 0, 0, 0}
-};
-
-static inline unsigned int
-expevt_to_fault_code(unsigned long expevt)
-{
- if (expevt == 0xa40)
- return FAULT_CODE_ITLB;
- else if (expevt == 0x060)
- return FAULT_CODE_WRITE;
-
- return 0;
-}
-
-/*
- This routine handles page faults that can be serviced just by refilling a
- TLB entry from an existing page table entry. (This case represents a very
- large majority of page faults.) Return 1 if the fault was successfully
- handled. Return 0 if the fault could not be handled. (This leads into the
- general fault handling in fault.c which deals with mapping file-backed
- pages, stack growth, segmentation faults, swapping etc etc)
- */
-asmlinkage int __kprobes
-do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt,
- unsigned long address)
-{
- unsigned long long protection_flags;
- unsigned long long index;
- unsigned long long expevt4;
- unsigned int fault_code;
-
- /* The next few lines implement a way of hashing EXPEVT into a
- * small array index which can be used to lookup parameters
- * specific to the type of TLBMISS being handled.
- *
- * Note:
- * ITLBMISS has EXPEVT==0xa40
- * RTLBMISS has EXPEVT==0x040
- * WTLBMISS has EXPEVT==0x060
- */
- expevt4 = (expevt >> 4);
- /* TODO : xor ssr_md into this expression too. Then we can check
- * that PRU is set when it needs to be. */
- index = expevt4 ^ (expevt4 >> 5);
- index &= 7;
-
- fault_code = expevt_to_fault_code(expevt);
-
- protection_flags = expevt_lookup_table.protection_flags[index];
-
- if (expevt_lookup_table.is_text_access[index])
- fault_code |= FAULT_CODE_ITLB;
- if (!ssr_md)
- fault_code |= FAULT_CODE_USER;
-
- set_thread_fault_code(fault_code);
-
- return handle_tlbmiss(protection_flags, address);
-}
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
deleted file mode 100644
index bd0715d..0000000
--- a/arch/sh/mm/tlbflush_64.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/sh/mm/tlb-flush_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/perf_event.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/tlb.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long long match, pteh=0, lpage;
- unsigned long tlb;
-
- /*
- * Sign-extend based on neff.
- */
- lpage = neff_sign_extend(page);
- match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
- match |= lpage;
-
- for_each_itlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- if (pteh == match) {
- __flush_tlb_slot(tlb);
- break;
- }
- }
-
- for_each_dtlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- if (pteh == match) {
- __flush_tlb_slot(tlb);
- break;
- }
-
- }
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned long flags;
-
- if (vma->vm_mm) {
- page &= PAGE_MASK;
- local_irq_save(flags);
- local_flush_tlb_one(get_asid(), page);
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- unsigned long flags;
- unsigned long long match, pteh=0, pteh_epn, pteh_low;
- unsigned long tlb;
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm;
-
- mm = vma->vm_mm;
- if (cpu_context(cpu, mm) == NO_CONTEXT)
- return;
-
- local_irq_save(flags);
-
- start &= PAGE_MASK;
- end &= PAGE_MASK;
-
- match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID;
-
- /* Flush ITLB */
- for_each_itlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- pteh_epn = pteh & PAGE_MASK;
- pteh_low = pteh & ~PAGE_MASK;
-
- if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
- __flush_tlb_slot(tlb);
- }
-
- /* Flush DTLB */
- for_each_dtlb_entry(tlb) {
- asm volatile ("getcfg %1, 0, %0"
- : "=r" (pteh)
- : "r" (tlb) );
-
- pteh_epn = pteh & PAGE_MASK;
- pteh_low = pteh & ~PAGE_MASK;
-
- if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
- __flush_tlb_slot(tlb);
- }
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- unsigned long flags;
- unsigned int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) == NO_CONTEXT)
- return;
-
- local_irq_save(flags);
-
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
- /* Invalidate all, including shared pages, excluding fixed TLBs */
- unsigned long flags, tlb;
-
- local_irq_save(flags);
-
- /* Flush each ITLB entry */
- for_each_itlb_entry(tlb)
- __flush_tlb_slot(tlb);
-
- /* Flush each DTLB entry */
- for_each_dtlb_entry(tlb)
- __flush_tlb_slot(tlb);
-
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- /* FIXME: Optimize this later.. */
- flush_tlb_all();
-}
-
-void __flush_tlb_global(void)
-{
- flush_tlb_all();
-}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ec873f0..527957d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1516,7 +1516,7 @@
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST
+ depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 04f86b8..8cd471d 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -45,7 +45,7 @@
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || (SUPERH32 && !MMU) || C6X)
+ depends on (ARM || (SUPERH && !MMU) || C6X)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh
index 94a8335..955cf3a 100755
--- a/scripts/headers_install.sh
+++ b/scripts/headers_install.sh
@@ -81,9 +81,6 @@
arch/m68k/include/uapi/asm/ptrace.h:CONFIG_COLDFIRE
arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_NO
arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_SUPPORT
-arch/sh/include/uapi/asm/ptrace.h:CONFIG_CPU_SH5
-arch/sh/include/uapi/asm/sigcontext.h:CONFIG_CPU_SH5
-arch/sh/include/uapi/asm/stat.h:CONFIG_CPU_SH5
arch/x86/include/uapi/asm/auxvec.h:CONFIG_IA32_EMULATION
arch/x86/include/uapi/asm/auxvec.h:CONFIG_X86_64
arch/x86/include/uapi/asm/mman.h:CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
diff --git a/tools/arch/sh/include/asm/barrier.h b/tools/arch/sh/include/asm/barrier.h
index bde5221..7eaea27 100644
--- a/tools/arch/sh/include/asm/barrier.h
+++ b/tools/arch/sh/include/asm/barrier.h
@@ -22,7 +22,7 @@
* Historically we have only done this type of barrier for the MMUCR, but
* it's also necessary for the CCR, so we make it generic here instead.
*/
-#if defined(__SH4A__) || defined(__SH5__)
+#if defined(__SH4A__)
#define mb() __asm__ __volatile__ ("synco": : :"memory")
#define rmb() mb()
#define wmb() mb()
