Merge tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.5-rc7
Here are a few fixes for issues related to unbound port devices which
could lead to NULL-pointer dereferences. Notably the bind attributes for
usb-serial (port) drivers are removed as almost none of the drivers can
handle individual ports going away once they've been bound.
Included are also some new device ids.
All but the unbound-port fixes have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: quatech2: handle unbound ports
USB: serial: keyspan: handle unbound ports
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: suppress driver bind attributes
USB: serial: option: add support for Quectel RM500Q in QDL mode
USB: serial: opticon: fix control-message timeouts
USB: serial: option: Add support for Quectel RM500Q
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index df582fe..d3f420f 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -642,9 +642,13 @@
static int ch341_reset_resume(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
- struct ch341_private *priv = usb_get_serial_port_data(port);
+ struct ch341_private *priv;
int ret;
+ priv = usb_get_serial_port_data(port);
+ if (!priv)
+ return 0;
+
/* reconfigure ch341 serial port after bus-reset */
ch341_configure(serial->dev, priv);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 9690a5f..5737add 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -716,7 +716,7 @@
if (txCredits) {
port = edge_serial->serial->port[portNumber];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
spin_lock_irqsave(&edge_port->ep_lock,
flags);
edge_port->txCredits += txCredits;
@@ -1725,7 +1725,8 @@
static void process_rcvd_data(struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength)
{
- struct device *dev = &edge_serial->serial->dev->dev;
+ struct usb_serial *serial = edge_serial->serial;
+ struct device *dev = &serial->dev->dev;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
__u16 lastBufferLength;
@@ -1821,11 +1822,10 @@
/* spit this data back into the tty driver if this
port is open */
- if (rxLen) {
- port = edge_serial->serial->port[
- edge_serial->rxPort];
+ if (rxLen && edge_serial->rxPort < serial->num_ports) {
+ port = serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
__func__, rxLen,
edge_serial->rxPort);
@@ -1833,8 +1833,8 @@
rxLen);
edge_port->port->icount.rx += rxLen;
}
- buffer += rxLen;
}
+ buffer += rxLen;
break;
case EXPECT_HDR3: /* Expect 3rd byte of status header */
@@ -1869,6 +1869,8 @@
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
+ if (edge_serial->rxPort >= edge_serial->serial->num_ports)
+ return;
port = edge_serial->serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port == NULL) {
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index e66a59e..aa3dbce 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1058,6 +1058,8 @@
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
@@ -1459,6 +1461,8 @@
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cb7aac9..ed2b4e6 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -113,7 +113,7 @@
retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
- 0, 0, buffer, 1, 0);
+ 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT);
kfree(buffer);
if (retval < 0)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2d919d0..084cc2f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,7 @@
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
+#define QUECTEL_PRODUCT_RM500Q 0x0800
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -1104,6 +1105,11 @@
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
+ .driver_info = ZLP },
+
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index a62981c..f93b81a 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -841,7 +841,10 @@
u8 newMSR = (u8) *ch;
unsigned long flags;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
spin_lock_irqsave(&port_priv->lock, flags);
port_priv->shadowMSR = newMSR;
@@ -869,7 +872,10 @@
unsigned long flags;
u8 newLSR = (u8) *ch;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
if (newLSR & UART_LSR_BI)
newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index edbbb13..bd23a7c 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -86,6 +86,8 @@
#define MOTOROLA_TETRA_IDS() \
{ USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \
{ USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \
+ { USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \
+ { USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \
{ USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */
DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8f066bb..dc7a65b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1317,6 +1317,9 @@
return -EINVAL;
}
+ /* Prevent individual ports from being unbound. */
+ driver->driver.suppress_bind_attrs = true;
+
usb_serial_operations_init(driver);
/* Add this device to our list of devices */
