Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also
some reverts of double-applied patches that brings the diffstat up a
bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC)
Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
ARM: omap2plus: select RESET_CONTROLLER
ARM: davinci: select CONFIG_RESET_CONTROLLER
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: mmp3: Fix the TWSI ranges
clk: mmp2: Fix the order of timer mux parents
ARM: mmp: do not divide the clock rate
arm64: dts: rockchip: Fix IR on Beelink A1
optee: Fix multi page dynamic shm pool alloc
...
diff --git a/MAINTAINERS b/MAINTAINERS
index f7c7a89..4ae9768 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1407,7 +1407,7 @@
ARM/ACTIONS SEMI ARCHITECTURE
M: Andreas Färber <afaerber@suse.de>
-R: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: owl
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 820ce3b..669559c 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -167,11 +167,7 @@
&pcie1_rc {
status = "okay";
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13..ddf1236 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f17..a813a0c 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -29,6 +29,27 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
+ main_12v0: fixedregulator-main_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "main_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of TPS54531D */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
@@ -547,10 +568,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c1c9cd3..13f7aef 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -258,9 +258,9 @@
};
};
- pca0: pca9552@60 {
+ pca0: pca9552@61 {
compatible = "nxp,pca9552";
- reg = <0x60>;
+ reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
@@ -521,371 +521,6 @@
&i2c13 {
status = "okay";
-};
-
-&i2c14 {
- status = "okay";
-};
-
-&i2c15 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-
- power-supply@68 {
- compatible = "ibm,cffps2";
- reg = <0x68>;
- };
-
- power-supply@69 {
- compatible = "ibm,cffps2";
- reg = <0x69>;
- };
-
- power-supply@6a {
- compatible = "ibm,cffps2";
- reg = <0x6a>;
- };
-
- power-supply@6b {
- compatible = "ibm,cffps2";
- reg = <0x6b>;
- };
-};
-
-&i2c4 {
- status = "okay";
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@49 {
- compatible = "ti,tmp275";
- reg = <0x49>;
- };
-
- tmp275@4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
-};
-
-&i2c5 {
- status = "okay";
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@49 {
- compatible = "ti,tmp275";
- reg = <0x49>;
- };
-};
-
-&i2c6 {
- status = "okay";
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
-
- tmp275@4b {
- compatible = "ti,tmp275";
- reg = <0x4b>;
- };
-};
-
-&i2c7 {
- status = "okay";
-
- si7021-a20@20 {
- compatible = "silabs,si7020";
- reg = <0x20>;
- };
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- max31785@52 {
- compatible = "maxim,max31785a";
- reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fan@0 {
- compatible = "pmbus-fan";
- reg = <0>;
- tach-pulses = <2>;
- };
-
- fan@1 {
- compatible = "pmbus-fan";
- reg = <1>;
- tach-pulses = <2>;
- };
-
- fan@2 {
- compatible = "pmbus-fan";
- reg = <2>;
- tach-pulses = <2>;
- };
-
- fan@3 {
- compatible = "pmbus-fan";
- reg = <3>;
- tach-pulses = <2>;
- };
- };
-
- pca0: pca9552@60 {
- compatible = "nxp,pca9552";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- };
-
- gpio@1 {
- reg = <1>;
- };
-
- gpio@2 {
- reg = <2>;
- };
-
- gpio@3 {
- reg = <3>;
- };
-
- gpio@4 {
- reg = <4>;
- };
-
- gpio@5 {
- reg = <5>;
- };
-
- gpio@6 {
- reg = <6>;
- };
-
- gpio@7 {
- reg = <7>;
- };
-
- gpio@8 {
- reg = <8>;
- };
-
- gpio@9 {
- reg = <9>;
- };
-
- gpio@10 {
- reg = <10>;
- };
-
- gpio@11 {
- reg = <11>;
- };
-
- gpio@12 {
- reg = <12>;
- };
-
- gpio@13 {
- reg = <13>;
- };
-
- gpio@14 {
- reg = <14>;
- };
-
- gpio@15 {
- reg = <15>;
- };
- };
-
- dps: dps310@76 {
- compatible = "infineon,dps310";
- reg = <0x76>;
- #io-channel-cells = <0>;
- };
-};
-
-&i2c8 {
- status = "okay";
-
- ucd90320@b {
- compatible = "ti,ucd90160";
- reg = <0x0b>;
- };
-
- ucd90320@c {
- compatible = "ti,ucd90160";
- reg = <0x0c>;
- };
-
- ucd90320@11 {
- compatible = "ti,ucd90160";
- reg = <0x11>;
- };
-
- rtc@32 {
- compatible = "epson,rx8900";
- reg = <0x32>;
- };
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
-};
-
-&i2c9 {
- status = "okay";
-
- ir35221@42 {
- compatible = "infineon,ir35221";
- reg = <0x42>;
- };
-
- ir35221@43 {
- compatible = "infineon,ir35221";
- reg = <0x43>;
- };
-
- ir35221@44 {
- compatible = "infineon,ir35221";
- reg = <0x44>;
- };
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- tmp423b@4d {
- compatible = "ti,tmp423";
- reg = <0x4d>;
- };
-
- ir35221@72 {
- compatible = "infineon,ir35221";
- reg = <0x72>;
- };
-
- ir35221@73 {
- compatible = "infineon,ir35221";
- reg = <0x73>;
- };
-
- ir35221@74 {
- compatible = "infineon,ir35221";
- reg = <0x74>;
- };
-};
-
-&i2c10 {
- status = "okay";
-
- ir35221@42 {
- compatible = "infineon,ir35221";
- reg = <0x42>;
- };
-
- ir35221@43 {
- compatible = "infineon,ir35221";
- reg = <0x43>;
- };
-
- ir35221@44 {
- compatible = "infineon,ir35221";
- reg = <0x44>;
- };
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- tmp423b@4d {
- compatible = "ti,tmp423";
- reg = <0x4d>;
- };
-
- ir35221@72 {
- compatible = "infineon,ir35221";
- reg = <0x72>;
- };
-
- ir35221@73 {
- compatible = "infineon,ir35221";
- reg = <0x73>;
- };
-
- ir35221@74 {
- compatible = "infineon,ir35221";
- reg = <0x74>;
- };
-};
-
-&i2c11 {
- status = "okay";
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@49 {
- compatible = "ti,tmp275";
- reg = <0x49>;
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index f02de4a..ff49ec7 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -122,37 +122,6 @@
};
};
-&fmc {
- status = "okay";
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
- spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
- };
-
- flash@1 {
- status = "okay";
- m25p,fast-read;
- label = "alt-bmc";
- spi-max-frequency = <50000000>;
- };
-};
-
-&spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1_default>;
-
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
- };
-};
-
&mac2 {
status = "okay";
pinctrl-names = "default";
@@ -165,6 +134,11 @@
&emmc {
status = "okay";
+};
+
+&fsim0 {
+ status = "okay";
+
#address-cells = <2>;
#size-cells = <0>;
@@ -820,373 +794,6 @@
status = "okay";
};
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-
- bmp: bmp280@77 {
- compatible = "bosch,bmp280";
- reg = <0x77>;
- #io-channel-cells = <1>;
- };
-
- max31785@52 {
- compatible = "maxim,max31785a";
- reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fan@0 {
- compatible = "pmbus-fan";
- reg = <0>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@1 {
- compatible = "pmbus-fan";
- reg = <1>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@2 {
- compatible = "pmbus-fan";
- reg = <2>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@3 {
- compatible = "pmbus-fan";
- reg = <3>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
- };
-
- dps: dps310@76 {
- compatible = "infineon,dps310";
- reg = <0x76>;
- #io-channel-cells = <0>;
- };
-
- pca0: pca9552@60 {
- compatible = "nxp,pca9552";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@1 {
- reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@2 {
- reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@3 {
- reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@4 {
- reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@5 {
- reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@6 {
- reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@7 {
- reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@8 {
- reg = <8>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@9 {
- reg = <9>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@10 {
- reg = <10>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@11 {
- reg = <11>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@12 {
- reg = <12>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@13 {
- reg = <13>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@14 {
- reg = <14>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@15 {
- reg = <15>;
- type = <PCA955X_TYPE_GPIO>;
- };
- };
-
- power-supply@68 {
- compatible = "ibm,cffps1";
- reg = <0x68>;
- };
-
- power-supply@69 {
- compatible = "ibm,cffps1";
- reg = <0x69>;
- };
-};
-
-&i2c4 {
- status = "okay";
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- ir35221@70 {
- compatible = "infineon,ir35221";
- reg = <0x70>;
- };
-
- ir35221@71 {
- compatible = "infineon,ir35221";
- reg = <0x71>;
- };
-};
-
-&i2c5 {
- status = "okay";
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- ir35221@70 {
- compatible = "infineon,ir35221";
- reg = <0x70>;
- };
-
- ir35221@71 {
- compatible = "infineon,ir35221";
- reg = <0x71>;
- };
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c9 {
- status = "okay";
-
- tmp275@4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-
- pca9552: pca9552@60 {
- compatible = "nxp,pca9552";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
- "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
- "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
- "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
- "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
- "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
- "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
- "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
- gpio@0 {
- reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@1 {
- reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@2 {
- reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@3 {
- reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@4 {
- reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@5 {
- reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@6 {
- reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@7 {
- reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@8 {
- reg = <8>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@9 {
- reg = <9>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@10 {
- reg = <10>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@11 {
- reg = <11>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@12 {
- reg = <12>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@13 {
- reg = <13>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@14 {
- reg = <14>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@15 {
- reg = <15>;
- type = <PCA955X_TYPE_GPIO>;
- };
- };
-
- rtc@32 {
- compatible = "epson,rx8900";
- reg = <0x32>;
- };
-
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
-
- ucd90160@64 {
- compatible = "ti,ucd90160";
- reg = <0x64>;
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
&pinctrl {
/* Hog these as no driver is probed for the entire LPC block */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 5f6142d..b72afba 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -163,26 +163,6 @@
spi-max-frequency = <50000000>;
status = "disabled";
};
-
- fsim0: fsi@1e79b000 {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b000 0x94>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi1_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
- status = "disabled";
- };
-
- fsim1: fsi@1e79b100 {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b100 0x94>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi2_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
- status = "disabled";
- };
};
mdio0: mdio@1e650000 {
@@ -595,6 +575,25 @@
ranges = <0 0x1e78a000 0x1000>;
};
+ fsim0: fsi@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ reg = <0x1e79b000 0x94>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ status = "disabled";
+ };
+
+ fsim1: fsi@1e79b100 {
+ compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ reg = <0x1e79b100 0x94>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi2_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index e43bccb..d8f3821 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -8,7 +8,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index 5219553..bb74fc6 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -63,7 +63,7 @@
#sound-dai-cells = <0>;
clocks = <&clk_ext_audio_codec>;
VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
+ VDDIO-supply = <&sw2_reg>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 845cfad..87f0aa8 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -204,7 +204,7 @@
};
rtc@56 {
- compatible = "rv3029c2";
+ compatible = "microcrystal,rv3029";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_hw300>;
reg = <0x56>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 71ca76a..fe59dde 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -749,10 +749,6 @@
vin-supply = <&vgen5_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen5_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 4829aa6..bc86cfa 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -584,10 +584,6 @@
vin-supply = <&sw2_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&sw2_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 3e1d32fd..5ace9e6 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,10 +265,6 @@
status = "okay";
};
-®_3p0 {
- vin-supply = <&sw2_reg>;
-};
-
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index f1830ed..91a7548 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -159,10 +159,6 @@
vin-supply = <&vgen6_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index a8ee708..5a63ca6 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -141,10 +141,6 @@
vin-supply = <&vgen6_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 1fb1ec5..6d16e32 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -49,3 +49,7 @@
reg = <0x80000000 0x10000000>;
};
};
+
+&gpmi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index d37a192..ab91c98 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -37,10 +37,10 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu0: cpu@0 {
+ cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
- reg = <0>;
+ reg = <0xf00>;
};
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 5a7e3e5..3c534cd 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -253,7 +253,7 @@
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8-pmu", "syscon";
- reg = <0xe0 0x8>;
+ reg = <0xe0 0x18>;
};
pinctrl_aobus: pinctrl@84 {
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index d9762de..6f48082 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -356,7 +356,7 @@
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4011000 0x1000>;
+ reg = <0xd4011000 0x70>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_TWSI0>;
resets = <&soc_clocks MMP2_CLK_TWSI0>;
@@ -368,7 +368,7 @@
twsi2: i2c@d4031000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4031000 0x1000>;
+ reg = <0xd4031000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <0>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
@@ -380,7 +380,7 @@
twsi3: i2c@d4032000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4032000 0x1000>;
+ reg = <0xd4032000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <1>;
clocks = <&soc_clocks MMP2_CLK_TWSI2>;
@@ -392,7 +392,7 @@
twsi4: i2c@d4033000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4033000 0x1000>;
+ reg = <0xd4033000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <2>;
clocks = <&soc_clocks MMP2_CLK_TWSI3>;
@@ -405,7 +405,7 @@
twsi5: i2c@d4033800 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4033800 0x1000>;
+ reg = <0xd4033800 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <3>;
clocks = <&soc_clocks MMP2_CLK_TWSI4>;
@@ -417,7 +417,7 @@
twsi6: i2c@d4034000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4034000 0x1000>;
+ reg = <0xd4034000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <4>;
clocks = <&soc_clocks MMP2_CLK_TWSI5>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fb92850..d9be511 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -101,7 +101,7 @@
initial-mode = <1>; /* initialize in HUB mode */
disabled-ports = <1>;
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
refclk-frequency = <19200000>;
};
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index dd427bd..02b180a 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -9,6 +9,7 @@
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
select REGMAP_MMIO
+ select RESET_CONTROLLER
select HAVE_IDE
select PINCTRL_SINGLE
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 110dcb3..c65cfc1 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -207,7 +207,7 @@
ret = clk_prepare_enable(clk);
if (ret)
return ret;
- rate = clk_get_rate(clk) / 2;
+ rate = clk_get_rate(clk);
} else if (cpu_is_pj4()) {
rate = 6500000;
} else {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ad08d47..dca7d06 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -95,6 +95,7 @@
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
@@ -105,11 +106,11 @@
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
+ select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
select CLKSRC_TI_32K
- select ARCH_HAS_RESET_CONTROLLER
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ca52271..e95c224 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -306,10 +306,14 @@
static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
{
+ struct clk_hw *hw = __clk_get_hw(clk);
struct clockdomain *clkdm = NULL;
struct clk_hw_omap *hwclk;
- hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+ hwclk = to_clk_hw_omap(hw);
+ if (!omap2_clk_is_hw_omap(hw))
+ return NULL;
+
if (hwclk && hwclk->clkdm_name)
clkdm = clkdm_lookup(hwclk->clkdm_name);
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
index 96ab022..121e6cc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -15,7 +15,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <®_dcdc1>;
- vqmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52..393c194 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -140,7 +140,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <®_aldo2>;
+ vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 144a2c1..d1fc9c2 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -61,10 +61,10 @@
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <0 120 8>,
- <0 121 8>,
- <0 122 8>,
- <0 123 8>;
+ interrupts = <0 170 4>,
+ <0 171 4>,
+ <0 172 4>,
+ <0 173 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 5bd0746..a8bb3fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -46,25 +46,47 @@
};
gpio-keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
+ compatible = "gpio-keys";
key1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};
key2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};
key3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ };
+
+ mic_mute {
+ label = "MicMute";
+ linux,code = <SW_MUTE_DEVICE>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+ };
+
+ power_key {
+ label = "PowerKey";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
};
};
@@ -569,6 +591,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 13a3cbe..a6f9b77 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -175,7 +175,7 @@
dcfg: syscon@1e00000 {
compatible = "fsl,ls1028a-dcfg", "syscon";
reg = <0x0 0x1e00000 0x0 0x10000>;
- big-endian;
+ little-endian;
};
rst: syscon@1e60000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6edbdfe..3d95b66 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -740,7 +740,7 @@
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
- <&clk IMX8MM_CLK_SDMA1_ROOT>;
+ <&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 2a759df..596bc65 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -421,7 +421,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_imu>;
interrupt-parent = <&gpio3>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
vdd-supply = <®_3v3_p>;
vddio-supply = <®_3v3_p>;
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 94090c6..d43e129 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,10 +60,10 @@
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <0 120 8>,
- <0 121 8>,
- <0 122 8>,
- <0 123 8>;
+ interrupts = <0 170 4>,
+ <0 171 4>,
+ <0 172 4>,
+ <0 173 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 76b49f5..16f1656 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -49,7 +49,8 @@
ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ linux,rc-map-name = "rc-beelink-gs1";
};
};
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index f4d1597..ccb44fe 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -343,6 +343,12 @@
return -EINVAL;
}
+ /* Always add a slot for main clocks fck and ick even if unused */
+ if (!nr_fck)
+ ddata->nr_clocks++;
+ if (!nr_ick)
+ ddata->nr_clocks++;
+
ddata->clocks = devm_kcalloc(ddata->dev,
ddata->nr_clocks, sizeof(*ddata->clocks),
GFP_KERNEL);
@@ -421,7 +427,7 @@
struct clk *clock;
int i, error;
- if (!ddata->clocks)
+ if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
return 0;
for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {
@@ -455,7 +461,7 @@
struct clk *clock;
int i;
- if (!ddata->clocks)
+ if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
return;
for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index a60a1be..b4a95cb 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -134,7 +134,7 @@
static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
+static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
static DEFINE_SPINLOCK(reset_lock);
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
index 5823f5b..3f0261d 100644
--- a/drivers/soc/amlogic/meson-ee-pwrc.c
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -323,6 +323,8 @@
struct meson_ee_pwrc *pwrc,
struct meson_ee_pwrc_domain *dom)
{
+ int ret;
+
dom->pwrc = pwrc;
dom->num_rstc = dom->desc.reset_names_count;
dom->num_clks = dom->desc.clk_names_count;
@@ -368,15 +370,21 @@
* prepare/enable counters won't be in sync.
*/
if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
- int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
+ ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
if (ret)
return ret;
- pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
- } else
- pm_genpd_init(&dom->base, NULL,
- (dom->desc.get_power ?
- dom->desc.get_power(dom) : true));
+ ret = pm_genpd_init(&dom->base, &pm_domain_always_on_gov,
+ false);
+ if (ret)
+ return ret;
+ } else {
+ ret = pm_genpd_init(&dom->base, NULL,
+ (dom->desc.get_power ?
+ dom->desc.get_power(dom) : true));
+ if (ret)
+ return ret;
+ }
return 0;
}
@@ -441,9 +449,7 @@
pwrc->xlate.domains[i] = &dom->base;
}
- of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
-
- return 0;
+ return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
}
static void meson_ee_pwrc_shutdown(struct platform_device *pdev)
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 378369d..e9ece45 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -419,6 +419,8 @@
ret = rproc_boot(m3_ipc->rproc);
if (ret)
dev_err(dev, "rproc_boot failed\n");
+ else
+ m3_ipc_state = m3_ipc;
do_exit(0);
}
@@ -505,8 +507,6 @@
goto err_put_rproc;
}
- m3_ipc_state = m3_ipc;
-
return 0;
err_put_rproc:
diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c
index 0332a53..d767eeb 100644
--- a/drivers/tee/optee/shm_pool.c
+++ b/drivers/tee/optee/shm_pool.c
@@ -28,9 +28,22 @@
shm->size = PAGE_SIZE << order;
if (shm->flags & TEE_SHM_DMA_BUF) {
+ unsigned int nr_pages = 1 << order, i;
+ struct page **pages;
+
+ pages = kcalloc(nr_pages, sizeof(pages), GFP_KERNEL);
+ if (!pages)
+ return -ENOMEM;
+
+ for (i = 0; i < nr_pages; i++) {
+ pages[i] = page;
+ page++;
+ }
+
shm->flags |= TEE_SHM_REGISTER;
- rc = optee_shm_register(shm->ctx, shm, &page, 1 << order,
+ rc = optee_shm_register(shm->ctx, shm, pages, nr_pages,
(unsigned long)shm->kaddr);
+ kfree(pages);
}
return rc;
diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h
index c614438..fbc524a 100644
--- a/include/dt-bindings/reset/amlogic,meson8b-reset.h
+++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -46,9 +46,9 @@
#define RESET_VD_RMEM 64
#define RESET_AUDIN 65
#define RESET_DBLK 66
-#define RESET_PIC_DC 66
-#define RESET_PSC 66
-#define RESET_NAND 66
+#define RESET_PIC_DC 67
+#define RESET_PSC 68
+#define RESET_NAND 69
#define RESET_GE2D 70
#define RESET_PARSER_REG 71
#define RESET_PARSER_FETCH 72
