blob: de2fb1c01b6e348ea188f1d34b51baf045cd8774 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
*/
/dts-v1/;
#include "qcom-msm8226.dtsi"
#include "qcom-pm8226.dtsi"
/delete-node/ &adsp_region;
/ {
model = "LG G Watch R";
compatible = "lg,lenok", "qcom,apq8026";
chassis-type = "watch";
qcom,board-id = <132 0x0a>;
qcom,msm-id = <199 0x20000>;
aliases {
serial0 = &blsp1_uart3;
serial1 = &blsp1_uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
adsp_region: adsp@3300000 {
reg = <0x03300000 0x1400000>;
no-map;
};
};
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
regulator-name = "wl-reg";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_regulator_default_state>;
};
};
&adsp {
status = "okay";
};
&blsp1_i2c1 {
status = "okay";
fuel-gauge@55 {
compatible = "ti,bq27421";
reg = <0x55>;
};
};
&blsp1_i2c5 {
status = "okay";
clock-frequency = <384000>;
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8226_l15>;
vio-supply = <&pm8226_l22>;
pinctrl-names = "default";
pinctrl-0 = <&touch_pins>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
};
};
};
&blsp1_uart3 {
status = "okay";
};
&blsp1_uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart4_default_state>;
bluetooth {
compatible = "brcm,bcm43430a0-bt";
max-speed = <3000000>;
pinctrl-names = "default";
pinctrl-0 = <&bluetooth_default_state>;
host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
};
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
pm8226_l15: l15 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l18: l18 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
pm8226_l19: l19 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l28: l28 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3000000>;
};
pm8226_lvs1: lvs1 {};
};
};
&sdhc_1 {
status = "okay";
vmmc-supply = <&pm8226_l17>;
vqmmc-supply = <&pm8226_l6>;
bus-width = <8>;
non-removable;
};
&sdhc_3 {
status = "okay";
max-frequency = <100000000>;
non-removable;
vmmc-supply = <&vreg_wlan>;
vqmmc-supply = <&pm8226_l6>;
#address-cells = <1>;
#size-cells = <0>;
wifi@1 {
compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wlan_hostwake_default_state>;
};
};
&smbb {
qcom,fast-charge-safe-current = <450000>;
qcom,fast-charge-current-limit = <400000>;
qcom,fast-charge-safe-voltage = <4350000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4450000>;
};
&tlmm {
blsp1_uart4_default_state: blsp1-uart4-default-state {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
function = "blsp_uart4";
drive-strength = <8>;
bias-disable;
};
bluetooth_default_state: bluetooth-default-state {
pins = "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
touch_pins: touch-state {
irq-pins {
pins = "gpio17";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
input-enable;
};
reset-pins {
pins = "gpio16";
function = "gpio";
drive-strength = <8>;
bias-disable;
output-high;
};
};
wlan_hostwake_default_state: wlan-hostwake-default-state {
pins = "gpio37";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
wlan_regulator_default_state: wlan-regulator-default-state {
pins = "gpio46";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
&usb {
status = "okay";
extcon = <&smbb>;
dr_mode = "peripheral";
};
&usb_hs_phy {
extcon = <&smbb>;
v1p8-supply = <&pm8226_l10>;
v3p3-supply = <&pm8226_l20>;
};