blob: 3ccb5ffdb3ca3f29bbc636026f7944f1c2494ec2 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
* Copyright (c) 2022, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sa8540p.dtsi"
#include "sa8540p-pmics.dtsi"
/ {
model = "Qualcomm SA8540P Ride";
compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c12 = &i2c12;
i2c15 = &i2c15;
i2c18 = &i2c18;
serial0 = &uart17;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a: ldo11 {
regulator-name = "vreg_l11a";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
regulator-name = "vreg_l13a";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "c";
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c: ldo6 {
regulator-name = "vreg_l6c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
regulator-name = "vreg_l17c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
};
regulators-2 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "g";
vreg_l3g: ldo3 {
regulator-name = "vreg_l3g";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7g: ldo7 {
regulator-name = "vreg_l7g";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_default>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_default>;
status = "okay";
};
&i2c12 {
pinctrl-names = "default";
pinctrl-0 = <&i2c12_default>;
status = "okay";
};
&i2c15 {
pinctrl-names = "default";
pinctrl-0 = <&i2c15_default>;
status = "okay";
};
&i2c18 {
pinctrl-names = "default";
pinctrl-0 = <&i2c18_default>;
status = "okay";
};
&pcie2a {
ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
<0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>,
<0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>;
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2a_default>;
status = "okay";
};
&pcie2a_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&pcie3a {
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
<0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>;
perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie3a_default>;
status = "okay";
};
&pcie3a_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&qup0 {
status = "okay";
};
&qup1 {
status = "okay";
};
&qup2 {
status = "okay";
};
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
status = "okay";
};
&remoteproc_nsp1 {
firmware-name = "qcom/sa8540p/cdsp1.mbn";
status = "okay";
};
&uart17 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17c>;
vccq-supply = <&vreg_l6c>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_0_dwc3 {
dr_mode = "peripheral";
};
&usb_0_hsphy {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7a>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_0_qmpphy {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_qmpphy0 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
&tlmm {
i2c0_default: i2c0-default-state {
/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
pins = "gpio135", "gpio136";
function = "qup0";
drive-strength = <2>;
bias-pull-up;
};
i2c1_default: i2c1-default-state {
/* To PM40028B-F3EI PCIe switch */
pins = "gpio158", "gpio159";
function = "qup1";
drive-strength = <2>;
bias-pull-up;
};
i2c12_default: i2c12-default-state {
/* To Maxim max20411 */
pins = "gpio0", "gpio1";
function = "qup12";
drive-strength = <2>;
bias-pull-up;
};
i2c15_default: i2c15-default-state {
/* To display connector (SIP1 only) */
pins = "gpio36", "gpio37";
function = "qup15";
drive-strength = <2>;
bias-pull-up;
};
i2c18_default: i2c18-default-state {
/* To ASM330LHH IMU (SIP1 only) */
pins = "gpio66", "gpio67";
function = "qup18";
drive-strength = <2>;
bias-pull-up;
};
pcie2a_default: pcie2a-default-state {
perst-pins {
pins = "gpio143";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio142";
function = "pcie2a_clkreq";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio145";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie3a_default: pcie3a-default-state {
perst-pins {
pins = "gpio151";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio150";
function = "pcie3a_clkreq";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio56";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};