blob: 46bd68e9ecfae44d631cf15cb4856e683c948782 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Core PHY library, taken from phy.c
*/
#include <linux/export.h>
#include <linux/phy.h>
#include <linux/of.h>
const char *phy_speed_to_str(int speed)
{
BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 75,
"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
"If a speed or mode has been added please update phy_speed_to_str "
"and the PHY settings array.\n");
switch (speed) {
case SPEED_10:
return "10Mbps";
case SPEED_100:
return "100Mbps";
case SPEED_1000:
return "1Gbps";
case SPEED_2500:
return "2.5Gbps";
case SPEED_5000:
return "5Gbps";
case SPEED_10000:
return "10Gbps";
case SPEED_14000:
return "14Gbps";
case SPEED_20000:
return "20Gbps";
case SPEED_25000:
return "25Gbps";
case SPEED_40000:
return "40Gbps";
case SPEED_50000:
return "50Gbps";
case SPEED_56000:
return "56Gbps";
case SPEED_100000:
return "100Gbps";
case SPEED_200000:
return "200Gbps";
case SPEED_400000:
return "400Gbps";
case SPEED_UNKNOWN:
return "Unknown";
default:
return "Unsupported (update phy-core.c)";
}
}
EXPORT_SYMBOL_GPL(phy_speed_to_str);
const char *phy_duplex_to_str(unsigned int duplex)
{
if (duplex == DUPLEX_HALF)
return "Half";
if (duplex == DUPLEX_FULL)
return "Full";
if (duplex == DUPLEX_UNKNOWN)
return "Unknown";
return "Unsupported (update phy-core.c)";
}
EXPORT_SYMBOL_GPL(phy_duplex_to_str);
/* A mapping of all SUPPORTED settings to speed/duplex. This table
* must be grouped by speed and sorted in descending match priority
* - iow, descending speed. */
#define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \
.bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}
static const struct phy_setting settings[] = {
/* 400G */
PHY_SETTING( 400000, FULL, 400000baseCR8_Full ),
PHY_SETTING( 400000, FULL, 400000baseKR8_Full ),
PHY_SETTING( 400000, FULL, 400000baseLR8_ER8_FR8_Full ),
PHY_SETTING( 400000, FULL, 400000baseDR8_Full ),
PHY_SETTING( 400000, FULL, 400000baseSR8_Full ),
/* 200G */
PHY_SETTING( 200000, FULL, 200000baseCR4_Full ),
PHY_SETTING( 200000, FULL, 200000baseKR4_Full ),
PHY_SETTING( 200000, FULL, 200000baseLR4_ER4_FR4_Full ),
PHY_SETTING( 200000, FULL, 200000baseDR4_Full ),
PHY_SETTING( 200000, FULL, 200000baseSR4_Full ),
/* 100G */
PHY_SETTING( 100000, FULL, 100000baseCR4_Full ),
PHY_SETTING( 100000, FULL, 100000baseKR4_Full ),
PHY_SETTING( 100000, FULL, 100000baseLR4_ER4_Full ),
PHY_SETTING( 100000, FULL, 100000baseSR4_Full ),
PHY_SETTING( 100000, FULL, 100000baseCR2_Full ),
PHY_SETTING( 100000, FULL, 100000baseKR2_Full ),
PHY_SETTING( 100000, FULL, 100000baseLR2_ER2_FR2_Full ),
PHY_SETTING( 100000, FULL, 100000baseDR2_Full ),
PHY_SETTING( 100000, FULL, 100000baseSR2_Full ),
/* 56G */
PHY_SETTING( 56000, FULL, 56000baseCR4_Full ),
PHY_SETTING( 56000, FULL, 56000baseKR4_Full ),
PHY_SETTING( 56000, FULL, 56000baseLR4_Full ),
PHY_SETTING( 56000, FULL, 56000baseSR4_Full ),
/* 50G */
PHY_SETTING( 50000, FULL, 50000baseCR2_Full ),
PHY_SETTING( 50000, FULL, 50000baseKR2_Full ),
PHY_SETTING( 50000, FULL, 50000baseSR2_Full ),
PHY_SETTING( 50000, FULL, 50000baseCR_Full ),
PHY_SETTING( 50000, FULL, 50000baseKR_Full ),
PHY_SETTING( 50000, FULL, 50000baseLR_ER_FR_Full ),
PHY_SETTING( 50000, FULL, 50000baseDR_Full ),
PHY_SETTING( 50000, FULL, 50000baseSR_Full ),
/* 40G */
PHY_SETTING( 40000, FULL, 40000baseCR4_Full ),
PHY_SETTING( 40000, FULL, 40000baseKR4_Full ),
PHY_SETTING( 40000, FULL, 40000baseLR4_Full ),
PHY_SETTING( 40000, FULL, 40000baseSR4_Full ),
/* 25G */
PHY_SETTING( 25000, FULL, 25000baseCR_Full ),
PHY_SETTING( 25000, FULL, 25000baseKR_Full ),
PHY_SETTING( 25000, FULL, 25000baseSR_Full ),
/* 20G */
PHY_SETTING( 20000, FULL, 20000baseKR2_Full ),
PHY_SETTING( 20000, FULL, 20000baseMLD2_Full ),
/* 10G */
PHY_SETTING( 10000, FULL, 10000baseCR_Full ),
PHY_SETTING( 10000, FULL, 10000baseER_Full ),
PHY_SETTING( 10000, FULL, 10000baseKR_Full ),
PHY_SETTING( 10000, FULL, 10000baseKX4_Full ),
PHY_SETTING( 10000, FULL, 10000baseLR_Full ),
PHY_SETTING( 10000, FULL, 10000baseLRM_Full ),
PHY_SETTING( 10000, FULL, 10000baseR_FEC ),
PHY_SETTING( 10000, FULL, 10000baseSR_Full ),
PHY_SETTING( 10000, FULL, 10000baseT_Full ),
/* 5G */
PHY_SETTING( 5000, FULL, 5000baseT_Full ),
/* 2.5G */
PHY_SETTING( 2500, FULL, 2500baseT_Full ),
PHY_SETTING( 2500, FULL, 2500baseX_Full ),
/* 1G */
PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
PHY_SETTING( 1000, FULL, 1000baseT_Full ),
PHY_SETTING( 1000, HALF, 1000baseT_Half ),
PHY_SETTING( 1000, FULL, 1000baseT1_Full ),
PHY_SETTING( 1000, FULL, 1000baseX_Full ),
/* 100M */
PHY_SETTING( 100, FULL, 100baseT_Full ),
PHY_SETTING( 100, FULL, 100baseT1_Full ),
PHY_SETTING( 100, HALF, 100baseT_Half ),
/* 10M */
PHY_SETTING( 10, FULL, 10baseT_Full ),
PHY_SETTING( 10, HALF, 10baseT_Half ),
};
#undef PHY_SETTING
/**
* phy_lookup_setting - lookup a PHY setting
* @speed: speed to match
* @duplex: duplex to match
* @mask: allowed link modes
* @exact: an exact match is required
*
* Search the settings array for a setting that matches the speed and
* duplex, and which is supported.
*
* If @exact is unset, either an exact match or %NULL for no match will
* be returned.
*
* If @exact is set, an exact match, the fastest supported setting at
* or below the specified speed, the slowest supported setting, or if
* they all fail, %NULL will be returned.
*/
const struct phy_setting *
phy_lookup_setting(int speed, int duplex, const unsigned long *mask, bool exact)
{
const struct phy_setting *p, *match = NULL, *last = NULL;
int i;
for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
if (p->bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
test_bit(p->bit, mask)) {
last = p;
if (p->speed == speed && p->duplex == duplex) {
/* Exact match for speed and duplex */
match = p;
break;
} else if (!exact) {
if (!match && p->speed <= speed)
/* Candidate */
match = p;
if (p->speed < speed)
break;
}
}
}
if (!match && !exact)
match = last;
return match;
}
EXPORT_SYMBOL_GPL(phy_lookup_setting);
size_t phy_speeds(unsigned int *speeds, size_t size,
unsigned long *mask)
{
size_t count;
int i;
for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
if (settings[i].bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
test_bit(settings[i].bit, mask) &&
(count == 0 || speeds[count - 1] != settings[i].speed))
speeds[count++] = settings[i].speed;
return count;
}
static int __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
{
const struct phy_setting *p;
int i;
for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
if (p->speed > max_speed)
linkmode_clear_bit(p->bit, addr);
else
break;
}
return 0;
}
static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
return __set_linkmode_max_speed(max_speed, phydev->supported);
}
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
{
int err;
err = __set_phy_supported(phydev, max_speed);
if (err)
return err;
phy_advertise_supported(phydev);
return 0;
}
EXPORT_SYMBOL(phy_set_max_speed);
void of_set_phy_supported(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
u32 max_speed;
if (!IS_ENABLED(CONFIG_OF_MDIO))
return;
if (!node)
return;
if (!of_property_read_u32(node, "max-speed", &max_speed))
__set_phy_supported(phydev, max_speed);
}
void of_set_phy_eee_broken(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
u32 broken = 0;
if (!IS_ENABLED(CONFIG_OF_MDIO))
return;
if (!node)
return;
if (of_property_read_bool(node, "eee-broken-100tx"))
broken |= MDIO_EEE_100TX;
if (of_property_read_bool(node, "eee-broken-1000t"))
broken |= MDIO_EEE_1000T;
if (of_property_read_bool(node, "eee-broken-10gt"))
broken |= MDIO_EEE_10GT;
if (of_property_read_bool(node, "eee-broken-1000kx"))
broken |= MDIO_EEE_1000KX;
if (of_property_read_bool(node, "eee-broken-10gkx4"))
broken |= MDIO_EEE_10GKX4;
if (of_property_read_bool(node, "eee-broken-10gkr"))
broken |= MDIO_EEE_10GKR;
phydev->eee_broken_modes = broken;
}
void phy_resolve_aneg_pause(struct phy_device *phydev)
{
if (phydev->duplex == DUPLEX_FULL) {
phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
phydev->lp_advertising);
phydev->asym_pause = linkmode_test_bit(
ETHTOOL_LINK_MODE_Asym_Pause_BIT,
phydev->lp_advertising);
}
}
EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
/**
* phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
* @phydev: The phy_device struct
*
* Resolve our and the link partner advertisements into their corresponding
* speed and duplex. If full duplex was negotiated, extract the pause mode
* from the link partner mask.
*/
void phy_resolve_aneg_linkmode(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
int i;
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
for (i = 0; i < ARRAY_SIZE(settings); i++)
if (test_bit(settings[i].bit, common)) {
phydev->speed = settings[i].speed;
phydev->duplex = settings[i].duplex;
break;
}
phy_resolve_aneg_pause(phydev);
}
EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
/**
* phy_check_downshift - check whether downshift occurred
* @phydev: The phy_device struct
*
* Check whether a downshift to a lower speed occurred. If this should be the
* case warn the user.
* Prerequisite for detecting downshift is that PHY driver implements the
* read_status callback and sets phydev->speed to the actual link speed.
*/
void phy_check_downshift(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
int i, speed = SPEED_UNKNOWN;
phydev->downshifted_rate = 0;
if (phydev->autoneg == AUTONEG_DISABLE ||
phydev->speed == SPEED_UNKNOWN)
return;
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
for (i = 0; i < ARRAY_SIZE(settings); i++)
if (test_bit(settings[i].bit, common)) {
speed = settings[i].speed;
break;
}
if (speed == SPEED_UNKNOWN || phydev->speed >= speed)
return;
phydev_warn(phydev, "Downshift occurred from negotiated speed %s to actual speed %s, check cabling!\n",
phy_speed_to_str(speed), phy_speed_to_str(phydev->speed));
phydev->downshifted_rate = 1;
}
EXPORT_SYMBOL_GPL(phy_check_downshift);
static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
int i = ARRAY_SIZE(settings);
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
while (--i >= 0) {
if (test_bit(settings[i].bit, common)) {
if (fdx_only && settings[i].duplex != DUPLEX_FULL)
continue;
return settings[i].speed;
}
}
return SPEED_UNKNOWN;
}
int phy_speed_down_core(struct phy_device *phydev)
{
int min_common_speed = phy_resolve_min_speed(phydev, true);
if (min_common_speed == SPEED_UNKNOWN)
return -EINVAL;
return __set_linkmode_max_speed(min_common_speed, phydev->advertising);
}
static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
u16 regnum)
{
/* Write the desired MMD Devad */
__mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
/* Write the desired MMD register address */
__mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
/* Select the Function : DATA with no post increment */
__mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
devad | MII_MMD_CTRL_NOINCR);
}
/**
* __phy_read_mmd - Convenience function for reading a register
* from an MMD on a given PHY.
* @phydev: The phy_device struct
* @devad: The MMD to read from (0..31)
* @regnum: The register on the MMD to read (0..65535)
*
* Same rules as for __phy_read();
*/
int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
{
int val;
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;
if (phydev->drv && phydev->drv->read_mmd) {
val = phydev->drv->read_mmd(phydev, devad, regnum);
} else if (phydev->is_c45) {
val = __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
devad, regnum);
} else {
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
mmd_phy_indirect(bus, phy_addr, devad, regnum);
/* Read the content of the MMD's selected register */
val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
}
return val;
}
EXPORT_SYMBOL(__phy_read_mmd);
/**
* phy_read_mmd - Convenience function for reading a register
* from an MMD on a given PHY.
* @phydev: The phy_device struct
* @devad: The MMD to read from
* @regnum: The register on the MMD to read
*
* Same rules as for phy_read();
*/
int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_read_mmd(phydev, devad, regnum);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL(phy_read_mmd);
/**
* __phy_write_mmd - Convenience function for writing a register
* on an MMD on a given PHY.
* @phydev: The phy_device struct
* @devad: The MMD to read from
* @regnum: The register on the MMD to read
* @val: value to write to @regnum
*
* Same rules as for __phy_write();
*/
int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
{
int ret;
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;
if (phydev->drv && phydev->drv->write_mmd) {
ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
} else if (phydev->is_c45) {
ret = __mdiobus_c45_write(phydev->mdio.bus, phydev->mdio.addr,
devad, regnum, val);
} else {
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
mmd_phy_indirect(bus, phy_addr, devad, regnum);
/* Write the data into MMD's selected register */
__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
ret = 0;
}
return ret;
}
EXPORT_SYMBOL(__phy_write_mmd);
/**
* phy_write_mmd - Convenience function for writing a register
* on an MMD on a given PHY.
* @phydev: The phy_device struct
* @devad: The MMD to read from
* @regnum: The register on the MMD to read
* @val: value to write to @regnum
*
* Same rules as for phy_write();
*/
int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_write_mmd(phydev, devad, regnum, val);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL(phy_write_mmd);
/**
* phy_modify_changed - Function for modifying a PHY register
* @phydev: the phy_device struct
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*
* Returns negative errno, 0 if there was no change, and 1 in case of change
*/
int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_modify_changed(phydev, regnum, mask, set);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_modify_changed);
/**
* __phy_modify - Convenience function for modifying a PHY register
* @phydev: the phy_device struct
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
{
int ret;
ret = __phy_modify_changed(phydev, regnum, mask, set);
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL_GPL(__phy_modify);
/**
* phy_modify - Convenience function for modifying a given PHY register
* @phydev: the phy_device struct
* @regnum: register number to write
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_modify(phydev, regnum, mask, set);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_modify);
/**
* __phy_modify_mmd_changed - Function for modifying a register on MMD
* @phydev: the phy_device struct
* @devad: the MMD containing register to modify
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* Unlocked helper function which allows a MMD register to be modified as
* new register value = (old register value & ~mask) | set
*
* Returns negative errno, 0 if there was no change, and 1 in case of change
*/
int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set)
{
int new, ret;
ret = __phy_read_mmd(phydev, devad, regnum);
if (ret < 0)
return ret;
new = (ret & ~mask) | set;
if (new == ret)
return 0;
ret = __phy_write_mmd(phydev, devad, regnum, new);
return ret < 0 ? ret : 1;
}
EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
/**
* phy_modify_mmd_changed - Function for modifying a register on MMD
* @phydev: the phy_device struct
* @devad: the MMD containing register to modify
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*
* Returns negative errno, 0 if there was no change, and 1 in case of change
*/
int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
/**
* __phy_modify_mmd - Convenience function for modifying a register on MMD
* @phydev: the phy_device struct
* @devad: the MMD containing register to modify
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set)
{
int ret;
ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL_GPL(__phy_modify_mmd);
/**
* phy_modify_mmd - Convenience function for modifying a register on MMD
* @phydev: the phy_device struct
* @devad: the MMD containing register to modify
* @regnum: register number to modify
* @mask: bit mask of bits to clear
* @set: new value of bits set in mask to write to @regnum
*
* NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
* to conclude the operation.
*/
int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set)
{
int ret;
phy_lock_mdio_bus(phydev);
ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_modify_mmd);
static int __phy_read_page(struct phy_device *phydev)
{
if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
return phydev->drv->read_page(phydev);
}
static int __phy_write_page(struct phy_device *phydev, int page)
{
if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
return phydev->drv->write_page(phydev, page);
}
/**
* phy_save_page() - take the bus lock and save the current page
* @phydev: a pointer to a &struct phy_device
*
* Take the MDIO bus lock, and return the current page number. On error,
* returns a negative errno. phy_restore_page() must always be called
* after this, irrespective of success or failure of this call.
*/
int phy_save_page(struct phy_device *phydev)
{
phy_lock_mdio_bus(phydev);
return __phy_read_page(phydev);
}
EXPORT_SYMBOL_GPL(phy_save_page);
/**
* phy_select_page() - take the bus lock, save the current page, and set a page
* @phydev: a pointer to a &struct phy_device
* @page: desired page
*
* Take the MDIO bus lock to protect against concurrent access, save the
* current PHY page, and set the current page. On error, returns a
* negative errno, otherwise returns the previous page number.
* phy_restore_page() must always be called after this, irrespective
* of success or failure of this call.
*/
int phy_select_page(struct phy_device *phydev, int page)
{
int ret, oldpage;
oldpage = ret = phy_save_page(phydev);
if (ret < 0)
return ret;
if (oldpage != page) {
ret = __phy_write_page(phydev, page);
if (ret < 0)
return ret;
}
return oldpage;
}
EXPORT_SYMBOL_GPL(phy_select_page);
/**
* phy_restore_page() - restore the page register and release the bus lock
* @phydev: a pointer to a &struct phy_device
* @oldpage: the old page, return value from phy_save_page() or phy_select_page()
* @ret: operation's return code
*
* Release the MDIO bus lock, restoring @oldpage if it is a valid page.
* This function propagates the earliest error code from the group of
* operations.
*
* Returns:
* @oldpage if it was a negative value, otherwise
* @ret if it was a negative errno value, otherwise
* phy_write_page()'s negative value if it were in error, otherwise
* @ret.
*/
int phy_restore_page(struct phy_device *phydev, int oldpage, int ret)
{
int r;
if (oldpage >= 0) {
r = __phy_write_page(phydev, oldpage);
/* Propagate the operation return code if the page write
* was successful.
*/
if (ret >= 0 && r < 0)
ret = r;
} else {
/* Propagate the phy page selection error code */
ret = oldpage;
}
phy_unlock_mdio_bus(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_restore_page);
/**
* phy_read_paged() - Convenience function for reading a paged register
* @phydev: a pointer to a &struct phy_device
* @page: the page for the phy
* @regnum: register number
*
* Same rules as for phy_read().
*/
int phy_read_paged(struct phy_device *phydev, int page, u32 regnum)
{
int ret = 0, oldpage;
oldpage = phy_select_page(phydev, page);
if (oldpage >= 0)
ret = __phy_read(phydev, regnum);
return phy_restore_page(phydev, oldpage, ret);
}
EXPORT_SYMBOL(phy_read_paged);
/**
* phy_write_paged() - Convenience function for writing a paged register
* @phydev: a pointer to a &struct phy_device
* @page: the page for the phy
* @regnum: register number
* @val: value to write
*
* Same rules as for phy_write().
*/
int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val)
{
int ret = 0, oldpage;
oldpage = phy_select_page(phydev, page);
if (oldpage >= 0)
ret = __phy_write(phydev, regnum, val);
return phy_restore_page(phydev, oldpage, ret);
}
EXPORT_SYMBOL(phy_write_paged);
/**
* phy_modify_paged_changed() - Function for modifying a paged register
* @phydev: a pointer to a &struct phy_device
* @page: the page for the phy
* @regnum: register number
* @mask: bit mask of bits to clear
* @set: bit mask of bits to set
*
* Returns negative errno, 0 if there was no change, and 1 in case of change
*/
int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum,
u16 mask, u16 set)
{
int ret = 0, oldpage;
oldpage = phy_select_page(phydev, page);
if (oldpage >= 0)
ret = __phy_modify_changed(phydev, regnum, mask, set);
return phy_restore_page(phydev, oldpage, ret);
}
EXPORT_SYMBOL(phy_modify_paged_changed);
/**
* phy_modify_paged() - Convenience function for modifying a paged register
* @phydev: a pointer to a &struct phy_device
* @page: the page for the phy
* @regnum: register number
* @mask: bit mask of bits to clear
* @set: bit mask of bits to set
*
* Same rules as for phy_read() and phy_write().
*/
int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
u16 mask, u16 set)
{
int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL(phy_modify_paged);