blob: 2a28a5af209ece73c8fc35f25b98809ce2badf53 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "tsens.h"
#define CAL_MDEGC 30000
#define CONFIG_ADDR 0x3640
#define CONFIG_ADDR_8660 0x3620
/* CONFIG_ADDR bitmasks */
#define CONFIG 0x9b
#define CONFIG_MASK 0xf
#define CONFIG_8660 1
#define CONFIG_SHIFT_8660 28
#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
#define STATUS_CNTL_ADDR_8064 0x3660
#define CNTL_ADDR 0x3620
/* CNTL_ADDR bitmasks */
#define EN BIT(0)
#define SW_RST BIT(1)
#define SENSOR0_EN BIT(3)
#define SLP_CLK_ENA BIT(26)
#define SLP_CLK_ENA_8660 BIT(24)
#define MEASURE_PERIOD 1
#define SENSOR0_SHIFT 3
/* INT_STATUS_ADDR bitmasks */
#define MIN_STATUS_MASK BIT(0)
#define LOWER_STATUS_CLR BIT(1)
#define UPPER_STATUS_CLR BIT(2)
#define MAX_STATUS_MASK BIT(3)
#define THRESHOLD_ADDR 0x3624
/* THRESHOLD_ADDR bitmasks */
#define THRESHOLD_MAX_LIMIT_SHIFT 24
#define THRESHOLD_MIN_LIMIT_SHIFT 16
#define THRESHOLD_UPPER_LIMIT_SHIFT 8
#define THRESHOLD_LOWER_LIMIT_SHIFT 0
/* Initial temperature threshold values */
#define LOWER_LIMIT_TH 0x50
#define UPPER_LIMIT_TH 0xdf
#define MIN_LIMIT_TH 0x0
#define MAX_LIMIT_TH 0xff
#define S0_STATUS_ADDR 0x3628
#define INT_STATUS_ADDR 0x363c
#define TRDY_MASK BIT(7)
#define TIMEOUT_US 100
static int suspend_8960(struct tsens_priv *priv)
{
int ret;
unsigned int mask;
struct regmap *map = priv->tm_map;
ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
if (ret)
return ret;
ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
if (ret)
return ret;
if (priv->num_sensors > 1)
mask = SLP_CLK_ENA | EN;
else
mask = SLP_CLK_ENA_8660 | EN;
ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
if (ret)
return ret;
return 0;
}
static int resume_8960(struct tsens_priv *priv)
{
int ret;
struct regmap *map = priv->tm_map;
ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
if (ret)
return ret;
/*
* Separate CONFIG restore is not needed only for 8660 as
* config is part of CTRL Addr and its restored as such
*/
if (priv->num_sensors > 1) {
ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
if (ret)
return ret;
}
ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
if (ret)
return ret;
ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
if (ret)
return ret;
return 0;
}
static int enable_8960(struct tsens_priv *priv, int id)
{
int ret;
u32 reg, mask;
ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
if (ret)
return ret;
mask = BIT(id + SENSOR0_SHIFT);
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
if (ret)
return ret;
if (priv->num_sensors > 1)
reg |= mask | SLP_CLK_ENA | EN;
else
reg |= mask | SLP_CLK_ENA_8660 | EN;
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);
if (ret)
return ret;
return 0;
}
static void disable_8960(struct tsens_priv *priv)
{
int ret;
u32 reg_cntl;
u32 mask;
mask = GENMASK(priv->num_sensors - 1, 0);
mask <<= SENSOR0_SHIFT;
mask |= EN;
ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg_cntl);
if (ret)
return;
reg_cntl &= ~mask;
if (priv->num_sensors > 1)
reg_cntl &= ~SLP_CLK_ENA;
else
reg_cntl &= ~SLP_CLK_ENA_8660;
regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
}
static int init_8960(struct tsens_priv *priv)
{
int ret, i;
u32 reg_cntl;
priv->tm_map = dev_get_regmap(priv->dev, NULL);
if (!priv->tm_map)
return -ENODEV;
/*
* The status registers for each sensor are discontiguous
* because some SoCs have 5 sensors while others have more
* but the control registers stay in the same place, i.e
* directly after the first 5 status registers.
*/
for (i = 0; i < priv->num_sensors; i++) {
if (i >= 5)
priv->sensor[i].status = S0_STATUS_ADDR + 40;
priv->sensor[i].status += i * 4;
}
reg_cntl = SW_RST;
ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
if (ret)
return ret;
if (priv->num_sensors > 1) {
reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
reg_cntl &= ~SW_RST;
ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
CONFIG_MASK, CONFIG);
} else {
reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
reg_cntl &= ~CONFIG_MASK_8660;
reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
}
reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
reg_cntl |= EN;
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
return 0;
}
static int calibrate_8960(struct tsens_priv *priv)
{
int i;
char *data;
ssize_t num_read = priv->num_sensors;
struct tsens_sensor *s = priv->sensor;
data = qfprom_read(priv->dev, "calib");
if (IS_ERR(data))
data = qfprom_read(priv->dev, "calib_backup");
if (IS_ERR(data))
return PTR_ERR(data);
for (i = 0; i < num_read; i++, s++)
s->offset = data[i];
kfree(data);
return 0;
}
/* Temperature on y axis and ADC-code on x-axis */
static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
{
int slope, offset;
slope = thermal_zone_get_slope(s->tzd);
offset = CAL_MDEGC - slope * s->offset;
return adc_code * slope + offset;
}
static int get_temp_8960(const struct tsens_sensor *s, int *temp)
{
int ret;
u32 code, trdy;
struct tsens_priv *priv = s->priv;
unsigned long timeout;
timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
do {
ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
if (ret)
return ret;
if (!(trdy & TRDY_MASK))
continue;
ret = regmap_read(priv->tm_map, s->status, &code);
if (ret)
return ret;
*temp = code_to_mdegC(code, s);
return 0;
} while (time_before(jiffies, timeout));
return -ETIMEDOUT;
}
static const struct tsens_ops ops_8960 = {
.init = init_8960,
.calibrate = calibrate_8960,
.get_temp = get_temp_8960,
.enable = enable_8960,
.disable = disable_8960,
.suspend = suspend_8960,
.resume = resume_8960,
};
struct tsens_plat_data data_8960 = {
.num_sensors = 11,
.ops = &ops_8960,
};