blob: 4894c35149551d241d6754ea1edac8020f2fe1aa [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
menuconfig GREYBUS
tristate "Greybus support"
depends on SYSFS
---help---
This option enables the Greybus driver core. Greybus is an
hardware protocol that was designed to provide Unipro with a
sane application layer. It was originally designed for the
ARA project, a module phone system, but has shown up in other
phones, and can be tunneled over other busses in order to
control hardware devices.
Say Y here to enable support for these types of drivers.
To compile this code as a module, chose M here: the module
will be called greybus.ko
if GREYBUS
config GREYBUS_ES2
tristate "Greybus ES3 USB host controller"
depends on USB
---help---
Select this option if you have a Toshiba ES3 USB device that
acts as a Greybus "host controller". This device is a bridge
from a USB device to a Unipro network.
To compile this code as a module, chose M here: the module
will be called gb-es2.ko
config GREYBUS_AUDIO
tristate "Greybus Audio Class driver"
depends on SOUND
---help---
Select this option if you have a device that follows the
Greybus Audio Class specification.
To compile this code as a module, chose M here: the module
will be called gb-audio.ko
config GREYBUS_BOOTROM
tristate "Greybus Bootrom Class driver"
---help---
Select this option if you have a device that follows the
Greybus Bootrom Class specification.
To compile this code as a module, chose M here: the module
will be called gb-bootrom.ko
config GREYBUS_CAMERA
tristate "Greybus Camera Class driver"
depends on MEDIA_SUPPORT && LEDS_CLASS_FLASH && BROKEN
---help---
Select this option if you have a device that follows the
Greybus Camera Class specification.
To compile this code as a module, chose M here: the module
will be called gb-camera.ko
config GREYBUS_FIRMWARE
tristate "Greybus Firmware Download Class driver"
depends on SPI
---help---
Select this option if you have a device that follows the
Greybus Firmware Download Class specification.
To compile this code as a module, chose M here: the module
will be called gb-firmware.ko
config GREYBUS_HID
tristate "Greybus HID Class driver"
depends on HID && INPUT
---help---
Select this option if you have a device that follows the
Greybus HID Class specification.
To compile this code as a module, chose M here: the module
will be called gb-hid.ko
config GREYBUS_LIGHT
tristate "Greybus LED Class driver"
depends on LEDS_CLASS
---help---
Select this option if you have a device that follows the
Greybus LED Class specification.
To compile this code as a module, chose M here: the module
will be called gb-light.ko
config GREYBUS_LOG
tristate "Greybus Debug Log Class driver"
---help---
Select this option if you have a device that follows the
Greybus Debug Log Class specification.
To compile this code as a module, chose M here: the module
will be called gb-log.ko
config GREYBUS_LOOPBACK
tristate "Greybus Loopback Class driver"
---help---
Select this option if you have a device that follows the
Greybus Debug Log Class specification.
To compile this code as a module, chose M here: the module
will be called gb-log.ko
config GREYBUS_POWER
tristate "Greybus Powersupply Class driver"
depends on POWER_SUPPLY
---help---
Select this option if you have a device that follows the
Greybus Powersupply Class specification.
To compile this code as a module, chose M here: the module
will be called gb-power-supply.ko
config GREYBUS_RAW
tristate "Greybus Raw Class driver"
---help---
Select this option if you have a device that follows the
Greybus Raw Class specification.
To compile this code as a module, chose M here: the module
will be called gb-raw.ko
config GREYBUS_VIBRATOR
tristate "Greybus Vibrator Motor Class driver"
---help---
Select this option if you have a device that follows the
Greybus Vibrator Motor Class specification.
To compile this code as a module, chose M here: the module
will be called gb-vibrator.ko
menuconfig GREYBUS_BRIDGED_PHY
tristate "Greybus Bridged PHY Class drivers"
---help---
Select this option to pick from a variety of Greybus Bridged
PHY class drivers. These drivers emulate a number of
different "traditional" busses by tunneling them over Greybus.
Examples of this include serial, SPI, USB, and others.
To compile this code as a module, chose M here: the module
will be called gb-phy.ko
if GREYBUS_BRIDGED_PHY
config GREYBUS_GPIO
tristate "Greybus GPIO Bridged PHY driver"
depends on GPIOLIB
select GPIOLIB_IRQCHIP
---help---
Select this option if you have a device that follows the
Greybus GPIO Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-gpio.ko
config GREYBUS_I2C
tristate "Greybus I2C Bridged PHY driver"
depends on I2C
---help---
Select this option if you have a device that follows the
Greybus I2C Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-i2c.ko
config GREYBUS_PWM
tristate "Greybus PWM Bridged PHY driver"
depends on PWM
---help---
Select this option if you have a device that follows the
Greybus PWM Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-pwm.ko
config GREYBUS_SDIO
tristate "Greybus SDIO Bridged PHY driver"
depends on MMC
---help---
Select this option if you have a device that follows the
Greybus SDIO Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-sdio.ko
config GREYBUS_SPI
tristate "Greybus SPI Bridged PHY driver"
depends on SPI
---help---
Select this option if you have a device that follows the
Greybus SPI Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-spi.ko
config GREYBUS_UART
tristate "Greybus UART Bridged PHY driver"
depends on TTY
---help---
Select this option if you have a device that follows the
Greybus UART Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-uart.ko
config GREYBUS_USB
tristate "Greybus USB Host Bridged PHY driver"
depends on USB
---help---
Select this option if you have a device that follows the
Greybus USB Host Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-usb.ko
endif # GREYBUS_BRIDGED_PHY
config GREYBUS_ARCHE
tristate "Greybus Arche Platform driver"
depends on USB_HSIC_USB3613 || COMPILE_TEST
---help---
Select this option if you have an Arche device.
To compile this code as a module, chose M here: the module
will be called gb-arche.ko
endif # GREYBUS